| /* |
| * Copyright 2023 Advanced Micro Devices, Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| * |
| * Authors: AMD |
| * |
| */ |
| |
| /* FILE POLICY AND INTENDED USAGE: |
| * This file owns the programming sequence of stream's dpms state associated |
| * with the link and link's enable/disable sequences as result of the stream's |
| * dpms state change. |
| * |
| * TODO - The reason link owns stream's dpms programming sequence is |
| * because dpms programming sequence is highly dependent on underlying signal |
| * specific link protocols. This unfortunately causes link to own a portion of |
| * stream state programming sequence. This creates a gray area where the |
| * boundary between link and stream is not clearly defined. |
| */ |
| |
| #include "link_dpms.h" |
| #include "link_hwss.h" |
| #include "link_validation.h" |
| #include "accessories/link_dp_trace.h" |
| #include "protocols/link_dpcd.h" |
| #include "protocols/link_ddc.h" |
| #include "protocols/link_hpd.h" |
| #include "protocols/link_dp_phy.h" |
| #include "protocols/link_dp_capability.h" |
| #include "protocols/link_dp_training.h" |
| #include "protocols/link_edp_panel_control.h" |
| #include "protocols/link_dp_dpia_bw.h" |
| |
| #include "dm_helpers.h" |
| #include "link_enc_cfg.h" |
| #include "resource.h" |
| #include "dsc.h" |
| #include "dccg.h" |
| #include "clk_mgr.h" |
| #include "atomfirmware.h" |
| #define DC_LOGGER \ |
| dc_logger |
| #define DC_LOGGER_INIT(logger) \ |
| struct dal_logger *dc_logger = logger |
| |
| #define LINK_INFO(...) \ |
| DC_LOG_HW_HOTPLUG( \ |
| __VA_ARGS__) |
| |
| #define RETIMER_REDRIVER_INFO(...) \ |
| DC_LOG_RETIMER_REDRIVER( \ |
| __VA_ARGS__) |
| #include "dc/dcn30/dcn30_vpg.h" |
| |
| #define MAX_MTP_SLOT_COUNT 64 |
| #define LINK_TRAINING_ATTEMPTS 4 |
| #define PEAK_FACTOR_X1000 1006 |
| |
| void link_blank_all_dp_displays(struct dc *dc) |
| { |
| unsigned int i; |
| uint8_t dpcd_power_state = '\0'; |
| enum dc_status status = DC_ERROR_UNEXPECTED; |
| |
| for (i = 0; i < dc->link_count; i++) { |
| if ((dc->links[i]->connector_signal != SIGNAL_TYPE_DISPLAY_PORT) || |
| (dc->links[i]->priv == NULL) || (dc->links[i]->local_sink == NULL)) |
| continue; |
| |
| /* DP 2.0 spec requires that we read LTTPR caps first */ |
| dp_retrieve_lttpr_cap(dc->links[i]); |
| /* if any of the displays are lit up turn them off */ |
| status = core_link_read_dpcd(dc->links[i], DP_SET_POWER, |
| &dpcd_power_state, sizeof(dpcd_power_state)); |
| |
| if (status == DC_OK && dpcd_power_state == DP_POWER_STATE_D0) |
| link_blank_dp_stream(dc->links[i], true); |
| } |
| |
| } |
| |
| void link_blank_all_edp_displays(struct dc *dc) |
| { |
| unsigned int i; |
| uint8_t dpcd_power_state = '\0'; |
| enum dc_status status = DC_ERROR_UNEXPECTED; |
| |
| for (i = 0; i < dc->link_count; i++) { |
| if ((dc->links[i]->connector_signal != SIGNAL_TYPE_EDP) || |
| (!dc->links[i]->edp_sink_present)) |
| continue; |
| |
| /* if any of the displays are lit up turn them off */ |
| status = core_link_read_dpcd(dc->links[i], DP_SET_POWER, |
| &dpcd_power_state, sizeof(dpcd_power_state)); |
| |
| if (status == DC_OK && dpcd_power_state == DP_POWER_STATE_D0) |
| link_blank_dp_stream(dc->links[i], true); |
| } |
| } |
| |
| void link_blank_dp_stream(struct dc_link *link, bool hw_init) |
| { |
| unsigned int j; |
| struct dc *dc = link->ctx->dc; |
| enum signal_type signal = link->connector_signal; |
| |
| if ((signal == SIGNAL_TYPE_EDP) || |
| (signal == SIGNAL_TYPE_DISPLAY_PORT)) { |
| if (link->ep_type == DISPLAY_ENDPOINT_PHY && |
| link->link_enc->funcs->get_dig_frontend && |
| link->link_enc->funcs->is_dig_enabled(link->link_enc)) { |
| unsigned int fe = link->link_enc->funcs->get_dig_frontend(link->link_enc); |
| |
| if (fe != ENGINE_ID_UNKNOWN) |
| for (j = 0; j < dc->res_pool->stream_enc_count; j++) { |
| if (fe == dc->res_pool->stream_enc[j]->id) { |
| dc->res_pool->stream_enc[j]->funcs->dp_blank(link, |
| dc->res_pool->stream_enc[j]); |
| break; |
| } |
| } |
| } |
| |
| if ((!link->wa_flags.dp_keep_receiver_powered) || hw_init) |
| dpcd_write_rx_power_ctrl(link, false); |
| } |
| } |
| |
| void link_set_all_streams_dpms_off_for_link(struct dc_link *link) |
| { |
| struct pipe_ctx *pipes[MAX_PIPES]; |
| struct dc_state *state = link->dc->current_state; |
| uint8_t count; |
| int i; |
| struct dc_stream_update stream_update; |
| bool dpms_off = true; |
| struct link_resource link_res = {0}; |
| |
| memset(&stream_update, 0, sizeof(stream_update)); |
| stream_update.dpms_off = &dpms_off; |
| |
| link_get_master_pipes_with_dpms_on(link, state, &count, pipes); |
| |
| for (i = 0; i < count; i++) { |
| stream_update.stream = pipes[i]->stream; |
| dc_commit_updates_for_stream(link->ctx->dc, NULL, 0, |
| pipes[i]->stream, &stream_update, |
| state); |
| } |
| |
| /* link can be also enabled by vbios. In this case it is not recorded |
| * in pipe_ctx. Disable link phy here to make sure it is completely off |
| */ |
| dp_disable_link_phy(link, &link_res, link->connector_signal); |
| } |
| |
| void link_resume(struct dc_link *link) |
| { |
| if (link->connector_signal != SIGNAL_TYPE_VIRTUAL) |
| program_hpd_filter(link); |
| } |
| |
| /* This function returns true if the pipe is used to feed video signal directly |
| * to the link. |
| */ |
| static bool is_master_pipe_for_link(const struct dc_link *link, |
| const struct pipe_ctx *pipe) |
| { |
| return resource_is_pipe_type(pipe, OTG_MASTER) && |
| pipe->stream->link == link; |
| } |
| |
| /* |
| * This function finds all master pipes feeding to a given link with dpms set to |
| * on in given dc state. |
| */ |
| void link_get_master_pipes_with_dpms_on(const struct dc_link *link, |
| struct dc_state *state, |
| uint8_t *count, |
| struct pipe_ctx *pipes[MAX_PIPES]) |
| { |
| int i; |
| struct pipe_ctx *pipe = NULL; |
| |
| *count = 0; |
| for (i = 0; i < MAX_PIPES; i++) { |
| pipe = &state->res_ctx.pipe_ctx[i]; |
| |
| if (is_master_pipe_for_link(link, pipe) && |
| pipe->stream->dpms_off == false) { |
| pipes[(*count)++] = pipe; |
| } |
| } |
| } |
| |
| static bool get_ext_hdmi_settings(struct pipe_ctx *pipe_ctx, |
| enum engine_id eng_id, |
| struct ext_hdmi_settings *settings) |
| { |
| bool result = false; |
| int i = 0; |
| struct integrated_info *integrated_info = |
| pipe_ctx->stream->ctx->dc_bios->integrated_info; |
| |
| if (integrated_info == NULL) |
| return false; |
| |
| /* |
| * Get retimer settings from sbios for passing SI eye test for DCE11 |
| * The setting values are varied based on board revision and port id |
| * Therefore the setting values of each ports is passed by sbios. |
| */ |
| |
| // Check if current bios contains ext Hdmi settings |
| if (integrated_info->gpu_cap_info & 0x20) { |
| switch (eng_id) { |
| case ENGINE_ID_DIGA: |
| settings->slv_addr = integrated_info->dp0_ext_hdmi_slv_addr; |
| settings->reg_num = integrated_info->dp0_ext_hdmi_6g_reg_num; |
| settings->reg_num_6g = integrated_info->dp0_ext_hdmi_6g_reg_num; |
| memmove(settings->reg_settings, |
| integrated_info->dp0_ext_hdmi_reg_settings, |
| sizeof(integrated_info->dp0_ext_hdmi_reg_settings)); |
| memmove(settings->reg_settings_6g, |
| integrated_info->dp0_ext_hdmi_6g_reg_settings, |
| sizeof(integrated_info->dp0_ext_hdmi_6g_reg_settings)); |
| result = true; |
| break; |
| case ENGINE_ID_DIGB: |
| settings->slv_addr = integrated_info->dp1_ext_hdmi_slv_addr; |
| settings->reg_num = integrated_info->dp1_ext_hdmi_6g_reg_num; |
| settings->reg_num_6g = integrated_info->dp1_ext_hdmi_6g_reg_num; |
| memmove(settings->reg_settings, |
| integrated_info->dp1_ext_hdmi_reg_settings, |
| sizeof(integrated_info->dp1_ext_hdmi_reg_settings)); |
| memmove(settings->reg_settings_6g, |
| integrated_info->dp1_ext_hdmi_6g_reg_settings, |
| sizeof(integrated_info->dp1_ext_hdmi_6g_reg_settings)); |
| result = true; |
| break; |
| case ENGINE_ID_DIGC: |
| settings->slv_addr = integrated_info->dp2_ext_hdmi_slv_addr; |
| settings->reg_num = integrated_info->dp2_ext_hdmi_6g_reg_num; |
| settings->reg_num_6g = integrated_info->dp2_ext_hdmi_6g_reg_num; |
| memmove(settings->reg_settings, |
| integrated_info->dp2_ext_hdmi_reg_settings, |
| sizeof(integrated_info->dp2_ext_hdmi_reg_settings)); |
| memmove(settings->reg_settings_6g, |
| integrated_info->dp2_ext_hdmi_6g_reg_settings, |
| sizeof(integrated_info->dp2_ext_hdmi_6g_reg_settings)); |
| result = true; |
| break; |
| case ENGINE_ID_DIGD: |
| settings->slv_addr = integrated_info->dp3_ext_hdmi_slv_addr; |
| settings->reg_num = integrated_info->dp3_ext_hdmi_6g_reg_num; |
| settings->reg_num_6g = integrated_info->dp3_ext_hdmi_6g_reg_num; |
| memmove(settings->reg_settings, |
| integrated_info->dp3_ext_hdmi_reg_settings, |
| sizeof(integrated_info->dp3_ext_hdmi_reg_settings)); |
| memmove(settings->reg_settings_6g, |
| integrated_info->dp3_ext_hdmi_6g_reg_settings, |
| sizeof(integrated_info->dp3_ext_hdmi_6g_reg_settings)); |
| result = true; |
| break; |
| default: |
| break; |
| } |
| |
| if (result == true) { |
| // Validate settings from bios integrated info table |
| if (settings->slv_addr == 0) |
| return false; |
| if (settings->reg_num > 9) |
| return false; |
| if (settings->reg_num_6g > 3) |
| return false; |
| |
| for (i = 0; i < settings->reg_num; i++) { |
| if (settings->reg_settings[i].i2c_reg_index > 0x20) |
| return false; |
| } |
| |
| for (i = 0; i < settings->reg_num_6g; i++) { |
| if (settings->reg_settings_6g[i].i2c_reg_index > 0x20) |
| return false; |
| } |
| } |
| } |
| |
| return result; |
| } |
| |
| static bool write_i2c(struct pipe_ctx *pipe_ctx, |
| uint8_t address, uint8_t *buffer, uint32_t length) |
| { |
| struct i2c_command cmd = {0}; |
| struct i2c_payload payload = {0}; |
| |
| memset(&payload, 0, sizeof(payload)); |
| memset(&cmd, 0, sizeof(cmd)); |
| |
| cmd.number_of_payloads = 1; |
| cmd.engine = I2C_COMMAND_ENGINE_DEFAULT; |
| cmd.speed = pipe_ctx->stream->ctx->dc->caps.i2c_speed_in_khz; |
| |
| payload.address = address; |
| payload.data = buffer; |
| payload.length = length; |
| payload.write = true; |
| cmd.payloads = &payload; |
| |
| if (dm_helpers_submit_i2c(pipe_ctx->stream->ctx, |
| pipe_ctx->stream->link, &cmd)) |
| return true; |
| |
| return false; |
| } |
| |
| static void write_i2c_retimer_setting( |
| struct pipe_ctx *pipe_ctx, |
| bool is_vga_mode, |
| bool is_over_340mhz, |
| struct ext_hdmi_settings *settings) |
| { |
| uint8_t slave_address = (settings->slv_addr >> 1); |
| uint8_t buffer[2]; |
| const uint8_t apply_rx_tx_change = 0x4; |
| uint8_t offset = 0xA; |
| uint8_t value = 0; |
| int i = 0; |
| bool i2c_success = false; |
| DC_LOGGER_INIT(pipe_ctx->stream->ctx->logger); |
| |
| memset(&buffer, 0, sizeof(buffer)); |
| |
| /* Start Ext-Hdmi programming*/ |
| |
| for (i = 0; i < settings->reg_num; i++) { |
| /* Apply 3G settings */ |
| if (settings->reg_settings[i].i2c_reg_index <= 0x20) { |
| |
| buffer[0] = settings->reg_settings[i].i2c_reg_index; |
| buffer[1] = settings->reg_settings[i].i2c_reg_val; |
| i2c_success = write_i2c(pipe_ctx, slave_address, |
| buffer, sizeof(buffer)); |
| RETIMER_REDRIVER_INFO("retimer write to slave_address = 0x%x,\ |
| offset = 0x%x, reg_val= 0x%x, i2c_success = %d\n", |
| slave_address, buffer[0], buffer[1], i2c_success?1:0); |
| |
| if (!i2c_success) |
| goto i2c_write_fail; |
| |
| /* Based on DP159 specs, APPLY_RX_TX_CHANGE bit in 0x0A |
| * needs to be set to 1 on every 0xA-0xC write. |
| */ |
| if (settings->reg_settings[i].i2c_reg_index == 0xA || |
| settings->reg_settings[i].i2c_reg_index == 0xB || |
| settings->reg_settings[i].i2c_reg_index == 0xC) { |
| |
| /* Query current value from offset 0xA */ |
| if (settings->reg_settings[i].i2c_reg_index == 0xA) |
| value = settings->reg_settings[i].i2c_reg_val; |
| else { |
| i2c_success = |
| link_query_ddc_data( |
| pipe_ctx->stream->link->ddc, |
| slave_address, &offset, 1, &value, 1); |
| if (!i2c_success) |
| goto i2c_write_fail; |
| } |
| |
| buffer[0] = offset; |
| /* Set APPLY_RX_TX_CHANGE bit to 1 */ |
| buffer[1] = value | apply_rx_tx_change; |
| i2c_success = write_i2c(pipe_ctx, slave_address, |
| buffer, sizeof(buffer)); |
| RETIMER_REDRIVER_INFO("retimer write to slave_address = 0x%x,\ |
| offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n", |
| slave_address, buffer[0], buffer[1], i2c_success?1:0); |
| if (!i2c_success) |
| goto i2c_write_fail; |
| } |
| } |
| } |
| |
| /* Apply 3G settings */ |
| if (is_over_340mhz) { |
| for (i = 0; i < settings->reg_num_6g; i++) { |
| /* Apply 3G settings */ |
| if (settings->reg_settings[i].i2c_reg_index <= 0x20) { |
| |
| buffer[0] = settings->reg_settings_6g[i].i2c_reg_index; |
| buffer[1] = settings->reg_settings_6g[i].i2c_reg_val; |
| i2c_success = write_i2c(pipe_ctx, slave_address, |
| buffer, sizeof(buffer)); |
| RETIMER_REDRIVER_INFO("above 340Mhz: retimer write to slave_address = 0x%x,\ |
| offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n", |
| slave_address, buffer[0], buffer[1], i2c_success?1:0); |
| |
| if (!i2c_success) |
| goto i2c_write_fail; |
| |
| /* Based on DP159 specs, APPLY_RX_TX_CHANGE bit in 0x0A |
| * needs to be set to 1 on every 0xA-0xC write. |
| */ |
| if (settings->reg_settings_6g[i].i2c_reg_index == 0xA || |
| settings->reg_settings_6g[i].i2c_reg_index == 0xB || |
| settings->reg_settings_6g[i].i2c_reg_index == 0xC) { |
| |
| /* Query current value from offset 0xA */ |
| if (settings->reg_settings_6g[i].i2c_reg_index == 0xA) |
| value = settings->reg_settings_6g[i].i2c_reg_val; |
| else { |
| i2c_success = |
| link_query_ddc_data( |
| pipe_ctx->stream->link->ddc, |
| slave_address, &offset, 1, &value, 1); |
| if (!i2c_success) |
| goto i2c_write_fail; |
| } |
| |
| buffer[0] = offset; |
| /* Set APPLY_RX_TX_CHANGE bit to 1 */ |
| buffer[1] = value | apply_rx_tx_change; |
| i2c_success = write_i2c(pipe_ctx, slave_address, |
| buffer, sizeof(buffer)); |
| RETIMER_REDRIVER_INFO("retimer write to slave_address = 0x%x,\ |
| offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n", |
| slave_address, buffer[0], buffer[1], i2c_success?1:0); |
| if (!i2c_success) |
| goto i2c_write_fail; |
| } |
| } |
| } |
| } |
| |
| if (is_vga_mode) { |
| /* Program additional settings if using 640x480 resolution */ |
| |
| /* Write offset 0xFF to 0x01 */ |
| buffer[0] = 0xff; |
| buffer[1] = 0x01; |
| i2c_success = write_i2c(pipe_ctx, slave_address, |
| buffer, sizeof(buffer)); |
| RETIMER_REDRIVER_INFO("retimer write to slave_address = 0x%x,\ |
| offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n", |
| slave_address, buffer[0], buffer[1], i2c_success?1:0); |
| if (!i2c_success) |
| goto i2c_write_fail; |
| |
| /* Write offset 0x00 to 0x23 */ |
| buffer[0] = 0x00; |
| buffer[1] = 0x23; |
| i2c_success = write_i2c(pipe_ctx, slave_address, |
| buffer, sizeof(buffer)); |
| RETIMER_REDRIVER_INFO("retimer write to slave_address = 0x%x,\ |
| offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n", |
| slave_address, buffer[0], buffer[1], i2c_success?1:0); |
| if (!i2c_success) |
| goto i2c_write_fail; |
| |
| /* Write offset 0xff to 0x00 */ |
| buffer[0] = 0xff; |
| buffer[1] = 0x00; |
| i2c_success = write_i2c(pipe_ctx, slave_address, |
| buffer, sizeof(buffer)); |
| RETIMER_REDRIVER_INFO("retimer write to slave_address = 0x%x,\ |
| offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n", |
| slave_address, buffer[0], buffer[1], i2c_success?1:0); |
| if (!i2c_success) |
| goto i2c_write_fail; |
| |
| } |
| |
| return; |
| |
| i2c_write_fail: |
| DC_LOG_DEBUG("Set retimer failed"); |
| } |
| |
| static void write_i2c_default_retimer_setting( |
| struct pipe_ctx *pipe_ctx, |
| bool is_vga_mode, |
| bool is_over_340mhz) |
| { |
| uint8_t slave_address = (0xBA >> 1); |
| uint8_t buffer[2]; |
| bool i2c_success = false; |
| DC_LOGGER_INIT(pipe_ctx->stream->ctx->logger); |
| |
| memset(&buffer, 0, sizeof(buffer)); |
| |
| /* Program Slave Address for tuning single integrity */ |
| /* Write offset 0x0A to 0x13 */ |
| buffer[0] = 0x0A; |
| buffer[1] = 0x13; |
| i2c_success = write_i2c(pipe_ctx, slave_address, |
| buffer, sizeof(buffer)); |
| RETIMER_REDRIVER_INFO("retimer writes default setting to slave_address = 0x%x,\ |
| offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n", |
| slave_address, buffer[0], buffer[1], i2c_success?1:0); |
| if (!i2c_success) |
| goto i2c_write_fail; |
| |
| /* Write offset 0x0A to 0x17 */ |
| buffer[0] = 0x0A; |
| buffer[1] = 0x17; |
| i2c_success = write_i2c(pipe_ctx, slave_address, |
| buffer, sizeof(buffer)); |
| RETIMER_REDRIVER_INFO("retimer write to slave_addr = 0x%x,\ |
| offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n", |
| slave_address, buffer[0], buffer[1], i2c_success?1:0); |
| if (!i2c_success) |
| goto i2c_write_fail; |
| |
| /* Write offset 0x0B to 0xDA or 0xD8 */ |
| buffer[0] = 0x0B; |
| buffer[1] = is_over_340mhz ? 0xDA : 0xD8; |
| i2c_success = write_i2c(pipe_ctx, slave_address, |
| buffer, sizeof(buffer)); |
| RETIMER_REDRIVER_INFO("retimer write to slave_addr = 0x%x,\ |
| offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n", |
| slave_address, buffer[0], buffer[1], i2c_success?1:0); |
| if (!i2c_success) |
| goto i2c_write_fail; |
| |
| /* Write offset 0x0A to 0x17 */ |
| buffer[0] = 0x0A; |
| buffer[1] = 0x17; |
| i2c_success = write_i2c(pipe_ctx, slave_address, |
| buffer, sizeof(buffer)); |
| RETIMER_REDRIVER_INFO("retimer write to slave_addr = 0x%x,\ |
| offset = 0x%x, reg_val= 0x%x, i2c_success = %d\n", |
| slave_address, buffer[0], buffer[1], i2c_success?1:0); |
| if (!i2c_success) |
| goto i2c_write_fail; |
| |
| /* Write offset 0x0C to 0x1D or 0x91 */ |
| buffer[0] = 0x0C; |
| buffer[1] = is_over_340mhz ? 0x1D : 0x91; |
| i2c_success = write_i2c(pipe_ctx, slave_address, |
| buffer, sizeof(buffer)); |
| RETIMER_REDRIVER_INFO("retimer write to slave_addr = 0x%x,\ |
| offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n", |
| slave_address, buffer[0], buffer[1], i2c_success?1:0); |
| if (!i2c_success) |
| goto i2c_write_fail; |
| |
| /* Write offset 0x0A to 0x17 */ |
| buffer[0] = 0x0A; |
| buffer[1] = 0x17; |
| i2c_success = write_i2c(pipe_ctx, slave_address, |
| buffer, sizeof(buffer)); |
| RETIMER_REDRIVER_INFO("retimer write to slave_addr = 0x%x,\ |
| offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n", |
| slave_address, buffer[0], buffer[1], i2c_success?1:0); |
| if (!i2c_success) |
| goto i2c_write_fail; |
| |
| |
| if (is_vga_mode) { |
| /* Program additional settings if using 640x480 resolution */ |
| |
| /* Write offset 0xFF to 0x01 */ |
| buffer[0] = 0xff; |
| buffer[1] = 0x01; |
| i2c_success = write_i2c(pipe_ctx, slave_address, |
| buffer, sizeof(buffer)); |
| RETIMER_REDRIVER_INFO("retimer write to slave_addr = 0x%x,\ |
| offset = 0x%x, reg_val = 0x%x, i2c_success = %d\n", |
| slave_address, buffer[0], buffer[1], i2c_success?1:0); |
| if (!i2c_success) |
| goto i2c_write_fail; |
| |
| /* Write offset 0x00 to 0x23 */ |
| buffer[0] = 0x00; |
| buffer[1] = 0x23; |
| i2c_success = write_i2c(pipe_ctx, slave_address, |
| buffer, sizeof(buffer)); |
| RETIMER_REDRIVER_INFO("retimer write to slave_addr = 0x%x,\ |
| offset = 0x%x, reg_val= 0x%x, i2c_success = %d\n", |
| slave_address, buffer[0], buffer[1], i2c_success?1:0); |
| if (!i2c_success) |
| goto i2c_write_fail; |
| |
| /* Write offset 0xff to 0x00 */ |
| buffer[0] = 0xff; |
| buffer[1] = 0x00; |
| i2c_success = write_i2c(pipe_ctx, slave_address, |
| buffer, sizeof(buffer)); |
| RETIMER_REDRIVER_INFO("retimer write default setting to slave_addr = 0x%x,\ |
| offset = 0x%x, reg_val= 0x%x, i2c_success = %d end here\n", |
| slave_address, buffer[0], buffer[1], i2c_success?1:0); |
| if (!i2c_success) |
| goto i2c_write_fail; |
| } |
| |
| return; |
| |
| i2c_write_fail: |
| DC_LOG_DEBUG("Set default retimer failed"); |
| } |
| |
| static void write_i2c_redriver_setting( |
| struct pipe_ctx *pipe_ctx, |
| bool is_over_340mhz) |
| { |
| uint8_t slave_address = (0xF0 >> 1); |
| uint8_t buffer[16]; |
| bool i2c_success = false; |
| DC_LOGGER_INIT(pipe_ctx->stream->ctx->logger); |
| |
| memset(&buffer, 0, sizeof(buffer)); |
| |
| // Program Slave Address for tuning single integrity |
| buffer[3] = 0x4E; |
| buffer[4] = 0x4E; |
| buffer[5] = 0x4E; |
| buffer[6] = is_over_340mhz ? 0x4E : 0x4A; |
| |
| i2c_success = write_i2c(pipe_ctx, slave_address, |
| buffer, sizeof(buffer)); |
| RETIMER_REDRIVER_INFO("redriver write 0 to all 16 reg offset expect following:\n\ |
| \t slave_addr = 0x%x, offset[3] = 0x%x, offset[4] = 0x%x,\ |
| offset[5] = 0x%x,offset[6] is_over_340mhz = 0x%x,\ |
| i2c_success = %d\n", |
| slave_address, buffer[3], buffer[4], buffer[5], buffer[6], i2c_success?1:0); |
| |
| if (!i2c_success) |
| DC_LOG_DEBUG("Set redriver failed"); |
| } |
| |
| static void update_psp_stream_config(struct pipe_ctx *pipe_ctx, bool dpms_off) |
| { |
| struct cp_psp *cp_psp = &pipe_ctx->stream->ctx->cp_psp; |
| struct link_encoder *link_enc = NULL; |
| struct cp_psp_stream_config config = {0}; |
| enum dp_panel_mode panel_mode = |
| dp_get_panel_mode(pipe_ctx->stream->link); |
| |
| if (cp_psp == NULL || cp_psp->funcs.update_stream_config == NULL) |
| return; |
| |
| link_enc = link_enc_cfg_get_link_enc(pipe_ctx->stream->link); |
| ASSERT(link_enc); |
| if (link_enc == NULL) |
| return; |
| |
| /* otg instance */ |
| config.otg_inst = (uint8_t) pipe_ctx->stream_res.tg->inst; |
| |
| /* dig front end */ |
| config.dig_fe = (uint8_t) pipe_ctx->stream_res.stream_enc->stream_enc_inst; |
| |
| /* stream encoder index */ |
| config.stream_enc_idx = pipe_ctx->stream_res.stream_enc->id - ENGINE_ID_DIGA; |
| if (dp_is_128b_132b_signal(pipe_ctx)) |
| config.stream_enc_idx = |
| pipe_ctx->stream_res.hpo_dp_stream_enc->id - ENGINE_ID_HPO_DP_0; |
| |
| /* dig back end */ |
| config.dig_be = pipe_ctx->stream->link->link_enc_hw_inst; |
| |
| /* link encoder index */ |
| config.link_enc_idx = link_enc->transmitter - TRANSMITTER_UNIPHY_A; |
| if (dp_is_128b_132b_signal(pipe_ctx)) |
| config.link_enc_idx = pipe_ctx->link_res.hpo_dp_link_enc->inst; |
| |
| /* dio output index is dpia index for DPIA endpoint & dcio index by default */ |
| if (pipe_ctx->stream->link->ep_type == DISPLAY_ENDPOINT_USB4_DPIA) |
| config.dio_output_idx = pipe_ctx->stream->link->link_id.enum_id - ENUM_ID_1; |
| else |
| config.dio_output_idx = link_enc->transmitter - TRANSMITTER_UNIPHY_A; |
| |
| |
| /* phy index */ |
| config.phy_idx = resource_transmitter_to_phy_idx( |
| pipe_ctx->stream->link->dc, link_enc->transmitter); |
| if (pipe_ctx->stream->link->ep_type == DISPLAY_ENDPOINT_USB4_DPIA) |
| /* USB4 DPIA doesn't use PHY in our soc, initialize it to 0 */ |
| config.phy_idx = 0; |
| |
| /* stream properties */ |
| config.assr_enabled = (panel_mode == DP_PANEL_MODE_EDP) ? 1 : 0; |
| config.mst_enabled = (pipe_ctx->stream->signal == |
| SIGNAL_TYPE_DISPLAY_PORT_MST) ? 1 : 0; |
| config.dp2_enabled = dp_is_128b_132b_signal(pipe_ctx) ? 1 : 0; |
| config.usb4_enabled = (pipe_ctx->stream->link->ep_type == DISPLAY_ENDPOINT_USB4_DPIA) ? |
| 1 : 0; |
| config.dpms_off = dpms_off; |
| |
| /* dm stream context */ |
| config.dm_stream_ctx = pipe_ctx->stream->dm_stream_context; |
| |
| cp_psp->funcs.update_stream_config(cp_psp->handle, &config); |
| } |
| |
| static void set_avmute(struct pipe_ctx *pipe_ctx, bool enable) |
| { |
| struct dc *dc = pipe_ctx->stream->ctx->dc; |
| |
| if (!dc_is_hdmi_signal(pipe_ctx->stream->signal)) |
| return; |
| |
| dc->hwss.set_avmute(pipe_ctx, enable); |
| } |
| |
| static void enable_mst_on_sink(struct dc_link *link, bool enable) |
| { |
| unsigned char mstmCntl; |
| |
| core_link_read_dpcd(link, DP_MSTM_CTRL, &mstmCntl, 1); |
| if (enable) |
| mstmCntl |= DP_MST_EN; |
| else |
| mstmCntl &= (~DP_MST_EN); |
| |
| core_link_write_dpcd(link, DP_MSTM_CTRL, &mstmCntl, 1); |
| } |
| |
| static void dsc_optc_config_log(struct display_stream_compressor *dsc, |
| struct dsc_optc_config *config) |
| { |
| uint32_t precision = 1 << 28; |
| uint32_t bytes_per_pixel_int = config->bytes_per_pixel / precision; |
| uint32_t bytes_per_pixel_mod = config->bytes_per_pixel % precision; |
| uint64_t ll_bytes_per_pix_fraq = bytes_per_pixel_mod; |
| DC_LOGGER_INIT(dsc->ctx->logger); |
| |
| /* 7 fractional digits decimal precision for bytes per pixel is enough because DSC |
| * bits per pixel precision is 1/16th of a pixel, which means bytes per pixel precision is |
| * 1/16/8 = 1/128 of a byte, or 0.0078125 decimal |
| */ |
| ll_bytes_per_pix_fraq *= 10000000; |
| ll_bytes_per_pix_fraq /= precision; |
| |
| DC_LOG_DSC("\tbytes_per_pixel 0x%08x (%d.%07d)", |
| config->bytes_per_pixel, bytes_per_pixel_int, (uint32_t)ll_bytes_per_pix_fraq); |
| DC_LOG_DSC("\tis_pixel_format_444 %d", config->is_pixel_format_444); |
| DC_LOG_DSC("\tslice_width %d", config->slice_width); |
| } |
| |
| static bool dp_set_dsc_on_rx(struct pipe_ctx *pipe_ctx, bool enable) |
| { |
| struct dc *dc = pipe_ctx->stream->ctx->dc; |
| struct dc_stream_state *stream = pipe_ctx->stream; |
| bool result = false; |
| |
| if (dc_is_virtual_signal(stream->signal)) |
| result = true; |
| else |
| result = dm_helpers_dp_write_dsc_enable(dc->ctx, stream, enable); |
| return result; |
| } |
| |
| /* The stream with these settings can be sent (unblanked) only after DSC was enabled on RX first, |
| * i.e. after dp_enable_dsc_on_rx() had been called |
| */ |
| void link_set_dsc_on_stream(struct pipe_ctx *pipe_ctx, bool enable) |
| { |
| /* TODO: Move this to HWSS as this is hardware programming sequence not a |
| * link layer sequence |
| */ |
| struct display_stream_compressor *dsc = pipe_ctx->stream_res.dsc; |
| struct dc *dc = pipe_ctx->stream->ctx->dc; |
| struct dc_stream_state *stream = pipe_ctx->stream; |
| struct pipe_ctx *odm_pipe; |
| int opp_cnt = 1; |
| struct dccg *dccg = dc->res_pool->dccg; |
| /* It has been found that when DSCCLK is lower than 16Mhz, we will get DCN |
| * register access hung. When DSCCLk is based on refclk, DSCCLk is always a |
| * fixed value higher than 16Mhz so the issue doesn't occur. When DSCCLK is |
| * generated by DTO, DSCCLK would be based on 1/3 dispclk. For small timings |
| * with DSC such as 480p60Hz, the dispclk could be low enough to trigger |
| * this problem. We are implementing a workaround here to keep using dscclk |
| * based on fixed value refclk when timing is smaller than 3x16Mhz (i.e |
| * 48Mhz) pixel clock to avoid hitting this problem. |
| */ |
| bool should_use_dto_dscclk = (dccg->funcs->set_dto_dscclk != NULL) && |
| stream->timing.pix_clk_100hz > 480000; |
| DC_LOGGER_INIT(dsc->ctx->logger); |
| |
| for (odm_pipe = pipe_ctx->next_odm_pipe; odm_pipe; odm_pipe = odm_pipe->next_odm_pipe) |
| opp_cnt++; |
| |
| if (enable) { |
| struct dsc_config dsc_cfg; |
| struct dsc_optc_config dsc_optc_cfg; |
| enum optc_dsc_mode optc_dsc_mode; |
| |
| /* Enable DSC hw block */ |
| dsc_cfg.pic_width = (stream->timing.h_addressable + stream->timing.h_border_left + stream->timing.h_border_right) / opp_cnt; |
| dsc_cfg.pic_height = stream->timing.v_addressable + stream->timing.v_border_top + stream->timing.v_border_bottom; |
| dsc_cfg.pixel_encoding = stream->timing.pixel_encoding; |
| dsc_cfg.color_depth = stream->timing.display_color_depth; |
| dsc_cfg.is_odm = pipe_ctx->next_odm_pipe ? true : false; |
| dsc_cfg.dc_dsc_cfg = stream->timing.dsc_cfg; |
| ASSERT(dsc_cfg.dc_dsc_cfg.num_slices_h % opp_cnt == 0); |
| dsc_cfg.dc_dsc_cfg.num_slices_h /= opp_cnt; |
| |
| dsc->funcs->dsc_set_config(dsc, &dsc_cfg, &dsc_optc_cfg); |
| dsc->funcs->dsc_enable(dsc, pipe_ctx->stream_res.opp->inst); |
| if (should_use_dto_dscclk) |
| dccg->funcs->set_dto_dscclk(dccg, dsc->inst); |
| for (odm_pipe = pipe_ctx->next_odm_pipe; odm_pipe; odm_pipe = odm_pipe->next_odm_pipe) { |
| struct display_stream_compressor *odm_dsc = odm_pipe->stream_res.dsc; |
| |
| odm_dsc->funcs->dsc_set_config(odm_dsc, &dsc_cfg, &dsc_optc_cfg); |
| odm_dsc->funcs->dsc_enable(odm_dsc, odm_pipe->stream_res.opp->inst); |
| if (should_use_dto_dscclk) |
| dccg->funcs->set_dto_dscclk(dccg, odm_dsc->inst); |
| } |
| dsc_cfg.dc_dsc_cfg.num_slices_h *= opp_cnt; |
| dsc_cfg.pic_width *= opp_cnt; |
| |
| optc_dsc_mode = dsc_optc_cfg.is_pixel_format_444 ? OPTC_DSC_ENABLED_444 : OPTC_DSC_ENABLED_NATIVE_SUBSAMPLED; |
| |
| /* Enable DSC in encoder */ |
| if (dc_is_dp_signal(stream->signal) && !dp_is_128b_132b_signal(pipe_ctx)) { |
| DC_LOG_DSC("Setting stream encoder DSC config for engine %d:", (int)pipe_ctx->stream_res.stream_enc->id); |
| dsc_optc_config_log(dsc, &dsc_optc_cfg); |
| pipe_ctx->stream_res.stream_enc->funcs->dp_set_dsc_config(pipe_ctx->stream_res.stream_enc, |
| optc_dsc_mode, |
| dsc_optc_cfg.bytes_per_pixel, |
| dsc_optc_cfg.slice_width); |
| |
| /* PPS SDP is set elsewhere because it has to be done after DIG FE is connected to DIG BE */ |
| } |
| |
| /* Enable DSC in OPTC */ |
| DC_LOG_DSC("Setting optc DSC config for tg instance %d:", pipe_ctx->stream_res.tg->inst); |
| dsc_optc_config_log(dsc, &dsc_optc_cfg); |
| pipe_ctx->stream_res.tg->funcs->set_dsc_config(pipe_ctx->stream_res.tg, |
| optc_dsc_mode, |
| dsc_optc_cfg.bytes_per_pixel, |
| dsc_optc_cfg.slice_width); |
| } else { |
| /* disable DSC in OPTC */ |
| pipe_ctx->stream_res.tg->funcs->set_dsc_config( |
| pipe_ctx->stream_res.tg, |
| OPTC_DSC_DISABLED, 0, 0); |
| |
| /* disable DSC in stream encoder */ |
| if (dc_is_dp_signal(stream->signal)) { |
| if (dp_is_128b_132b_signal(pipe_ctx)) |
| pipe_ctx->stream_res.hpo_dp_stream_enc->funcs->dp_set_dsc_pps_info_packet( |
| pipe_ctx->stream_res.hpo_dp_stream_enc, |
| false, |
| NULL, |
| true); |
| else { |
| pipe_ctx->stream_res.stream_enc->funcs->dp_set_dsc_config( |
| pipe_ctx->stream_res.stream_enc, |
| OPTC_DSC_DISABLED, 0, 0); |
| pipe_ctx->stream_res.stream_enc->funcs->dp_set_dsc_pps_info_packet( |
| pipe_ctx->stream_res.stream_enc, false, NULL, true); |
| } |
| } |
| |
| /* disable DSC block */ |
| if (dccg->funcs->set_ref_dscclk) |
| dccg->funcs->set_ref_dscclk(dccg, pipe_ctx->stream_res.dsc->inst); |
| pipe_ctx->stream_res.dsc->funcs->dsc_disable(pipe_ctx->stream_res.dsc); |
| for (odm_pipe = pipe_ctx->next_odm_pipe; odm_pipe; odm_pipe = odm_pipe->next_odm_pipe) { |
| if (dccg->funcs->set_ref_dscclk) |
| dccg->funcs->set_ref_dscclk(dccg, odm_pipe->stream_res.dsc->inst); |
| odm_pipe->stream_res.dsc->funcs->dsc_disable(odm_pipe->stream_res.dsc); |
| } |
| } |
| } |
| |
| /* |
| * For dynamic bpp change case, dsc is programmed with MASTER_UPDATE_LOCK enabled; |
| * hence PPS info packet update need to use frame update instead of immediate update. |
| * Added parameter immediate_update for this purpose. |
| * The decision to use frame update is hard-coded in function dp_update_dsc_config(), |
| * which is the only place where a "false" would be passed in for param immediate_update. |
| * |
| * immediate_update is only applicable when DSC is enabled. |
| */ |
| bool link_set_dsc_pps_packet(struct pipe_ctx *pipe_ctx, bool enable, bool immediate_update) |
| { |
| struct display_stream_compressor *dsc = pipe_ctx->stream_res.dsc; |
| struct dc_stream_state *stream = pipe_ctx->stream; |
| |
| if (!pipe_ctx->stream->timing.flags.DSC) |
| return false; |
| |
| if (!dsc) |
| return false; |
| |
| DC_LOGGER_INIT(dsc->ctx->logger); |
| |
| if (enable) { |
| struct dsc_config dsc_cfg; |
| uint8_t dsc_packed_pps[128]; |
| |
| memset(&dsc_cfg, 0, sizeof(dsc_cfg)); |
| memset(dsc_packed_pps, 0, 128); |
| |
| /* Enable DSC hw block */ |
| dsc_cfg.pic_width = stream->timing.h_addressable + stream->timing.h_border_left + stream->timing.h_border_right; |
| dsc_cfg.pic_height = stream->timing.v_addressable + stream->timing.v_border_top + stream->timing.v_border_bottom; |
| dsc_cfg.pixel_encoding = stream->timing.pixel_encoding; |
| dsc_cfg.color_depth = stream->timing.display_color_depth; |
| dsc_cfg.is_odm = pipe_ctx->next_odm_pipe ? true : false; |
| dsc_cfg.dc_dsc_cfg = stream->timing.dsc_cfg; |
| |
| dsc->funcs->dsc_get_packed_pps(dsc, &dsc_cfg, &dsc_packed_pps[0]); |
| memcpy(&stream->dsc_packed_pps[0], &dsc_packed_pps[0], sizeof(stream->dsc_packed_pps)); |
| if (dc_is_dp_signal(stream->signal)) { |
| DC_LOG_DSC("Setting stream encoder DSC PPS SDP for engine %d\n", (int)pipe_ctx->stream_res.stream_enc->id); |
| if (dp_is_128b_132b_signal(pipe_ctx)) |
| pipe_ctx->stream_res.hpo_dp_stream_enc->funcs->dp_set_dsc_pps_info_packet( |
| pipe_ctx->stream_res.hpo_dp_stream_enc, |
| true, |
| &dsc_packed_pps[0], |
| immediate_update); |
| else |
| pipe_ctx->stream_res.stream_enc->funcs->dp_set_dsc_pps_info_packet( |
| pipe_ctx->stream_res.stream_enc, |
| true, |
| &dsc_packed_pps[0], |
| immediate_update); |
| } |
| } else { |
| /* disable DSC PPS in stream encoder */ |
| memset(&stream->dsc_packed_pps[0], 0, sizeof(stream->dsc_packed_pps)); |
| if (dc_is_dp_signal(stream->signal)) { |
| if (dp_is_128b_132b_signal(pipe_ctx)) |
| pipe_ctx->stream_res.hpo_dp_stream_enc->funcs->dp_set_dsc_pps_info_packet( |
| pipe_ctx->stream_res.hpo_dp_stream_enc, |
| false, |
| NULL, |
| true); |
| else |
| pipe_ctx->stream_res.stream_enc->funcs->dp_set_dsc_pps_info_packet( |
| pipe_ctx->stream_res.stream_enc, false, NULL, true); |
| } |
| } |
| |
| return true; |
| } |
| |
| bool link_set_dsc_enable(struct pipe_ctx *pipe_ctx, bool enable) |
| { |
| struct display_stream_compressor *dsc = pipe_ctx->stream_res.dsc; |
| bool result = false; |
| |
| if (!pipe_ctx->stream->timing.flags.DSC) |
| goto out; |
| if (!dsc) |
| goto out; |
| |
| if (enable) { |
| { |
| link_set_dsc_on_stream(pipe_ctx, true); |
| result = true; |
| } |
| } else { |
| dp_set_dsc_on_rx(pipe_ctx, false); |
| link_set_dsc_on_stream(pipe_ctx, false); |
| result = true; |
| } |
| out: |
| return result; |
| } |
| |
| bool link_update_dsc_config(struct pipe_ctx *pipe_ctx) |
| { |
| struct display_stream_compressor *dsc = pipe_ctx->stream_res.dsc; |
| |
| if (!pipe_ctx->stream->timing.flags.DSC) |
| return false; |
| if (!dsc) |
| return false; |
| |
| link_set_dsc_on_stream(pipe_ctx, true); |
| link_set_dsc_pps_packet(pipe_ctx, true, false); |
| return true; |
| } |
| |
| static void enable_stream_features(struct pipe_ctx *pipe_ctx) |
| { |
| struct dc_stream_state *stream = pipe_ctx->stream; |
| |
| if (pipe_ctx->stream->signal != SIGNAL_TYPE_DISPLAY_PORT_MST) { |
| struct dc_link *link = stream->link; |
| union down_spread_ctrl old_downspread; |
| union down_spread_ctrl new_downspread; |
| |
| memset(&old_downspread, 0, sizeof(old_downspread)); |
| |
| core_link_read_dpcd(link, DP_DOWNSPREAD_CTRL, |
| &old_downspread.raw, sizeof(old_downspread)); |
| |
| new_downspread.raw = old_downspread.raw; |
| |
| new_downspread.bits.IGNORE_MSA_TIMING_PARAM = |
| (stream->ignore_msa_timing_param) ? 1 : 0; |
| |
| if (new_downspread.raw != old_downspread.raw) { |
| core_link_write_dpcd(link, DP_DOWNSPREAD_CTRL, |
| &new_downspread.raw, sizeof(new_downspread)); |
| } |
| |
| } else { |
| dm_helpers_mst_enable_stream_features(stream); |
| } |
| } |
| |
| static void log_vcp_x_y(const struct dc_link *link, struct fixed31_32 avg_time_slots_per_mtp) |
| { |
| const uint32_t VCP_Y_PRECISION = 1000; |
| uint64_t vcp_x, vcp_y; |
| DC_LOGGER_INIT(link->ctx->logger); |
| |
| // Add 0.5*(1/VCP_Y_PRECISION) to round up to decimal precision |
| avg_time_slots_per_mtp = dc_fixpt_add( |
| avg_time_slots_per_mtp, |
| dc_fixpt_from_fraction( |
| 1, |
| 2*VCP_Y_PRECISION)); |
| |
| vcp_x = dc_fixpt_floor( |
| avg_time_slots_per_mtp); |
| vcp_y = dc_fixpt_floor( |
| dc_fixpt_mul_int( |
| dc_fixpt_sub_int( |
| avg_time_slots_per_mtp, |
| dc_fixpt_floor( |
| avg_time_slots_per_mtp)), |
| VCP_Y_PRECISION)); |
| |
| |
| if (link->type == dc_connection_mst_branch) |
| DC_LOG_DP2("MST Update Payload: set_throttled_vcp_size slot X.Y for MST stream " |
| "X: %llu " |
| "Y: %llu/%d", |
| vcp_x, |
| vcp_y, |
| VCP_Y_PRECISION); |
| else |
| DC_LOG_DP2("SST Update Payload: set_throttled_vcp_size slot X.Y for SST stream " |
| "X: %llu " |
| "Y: %llu/%d", |
| vcp_x, |
| vcp_y, |
| VCP_Y_PRECISION); |
| } |
| |
| static struct fixed31_32 get_pbn_per_slot(struct dc_stream_state *stream) |
| { |
| struct fixed31_32 mbytes_per_sec; |
| uint32_t link_rate_in_mbytes_per_sec = dp_link_bandwidth_kbps(stream->link, |
| &stream->link->cur_link_settings); |
| link_rate_in_mbytes_per_sec /= 8000; /* Kbits to MBytes */ |
| |
| mbytes_per_sec = dc_fixpt_from_int(link_rate_in_mbytes_per_sec); |
| |
| return dc_fixpt_div_int(mbytes_per_sec, 54); |
| } |
| |
| static struct fixed31_32 get_pbn_from_bw_in_kbps(uint64_t kbps) |
| { |
| struct fixed31_32 peak_kbps; |
| uint32_t numerator = 0; |
| uint32_t denominator = 1; |
| |
| /* |
| * The 1.006 factor (margin 5300ppm + 300ppm ~ 0.6% as per spec) is not |
| * required when determining PBN/time slot utilization on the link between |
| * us and the branch, since that overhead is already accounted for in |
| * the get_pbn_per_slot function. |
| * |
| * The unit of 54/64Mbytes/sec is an arbitrary unit chosen based on |
| * common multiplier to render an integer PBN for all link rate/lane |
| * counts combinations |
| * calculate |
| * peak_kbps *= (64/54) |
| * peak_kbps /= (8 * 1000) convert to bytes |
| */ |
| |
| numerator = 64; |
| denominator = 54 * 8 * 1000; |
| kbps *= numerator; |
| peak_kbps = dc_fixpt_from_fraction(kbps, denominator); |
| |
| return peak_kbps; |
| } |
| |
| static struct fixed31_32 get_pbn_from_timing(struct pipe_ctx *pipe_ctx) |
| { |
| uint64_t kbps; |
| enum dc_link_encoding_format link_encoding; |
| |
| if (dp_is_128b_132b_signal(pipe_ctx)) |
| link_encoding = DC_LINK_ENCODING_DP_128b_132b; |
| else |
| link_encoding = DC_LINK_ENCODING_DP_8b_10b; |
| |
| kbps = dc_bandwidth_in_kbps_from_timing(&pipe_ctx->stream->timing, link_encoding); |
| return get_pbn_from_bw_in_kbps(kbps); |
| } |
| |
| |
| // TODO - DP2.0 Link: Fix get_lane_status to handle LTTPR offset (SST and MST) |
| static void get_lane_status( |
| struct dc_link *link, |
| uint32_t lane_count, |
| union lane_status *status, |
| union lane_align_status_updated *status_updated) |
| { |
| unsigned int lane; |
| uint8_t dpcd_buf[3] = {0}; |
| |
| if (status == NULL || status_updated == NULL) { |
| return; |
| } |
| |
| core_link_read_dpcd( |
| link, |
| DP_LANE0_1_STATUS, |
| dpcd_buf, |
| sizeof(dpcd_buf)); |
| |
| for (lane = 0; lane < lane_count; lane++) { |
| status[lane].raw = dp_get_nibble_at_index(&dpcd_buf[0], lane); |
| } |
| |
| status_updated->raw = dpcd_buf[2]; |
| } |
| |
| static bool poll_for_allocation_change_trigger(struct dc_link *link) |
| { |
| /* |
| * wait for ACT handled |
| */ |
| int i; |
| const int act_retries = 30; |
| enum act_return_status result = ACT_FAILED; |
| union payload_table_update_status update_status = {0}; |
| union lane_status dpcd_lane_status[LANE_COUNT_DP_MAX]; |
| union lane_align_status_updated lane_status_updated; |
| DC_LOGGER_INIT(link->ctx->logger); |
| |
| if (link->aux_access_disabled) |
| return true; |
| for (i = 0; i < act_retries; i++) { |
| get_lane_status(link, link->cur_link_settings.lane_count, dpcd_lane_status, &lane_status_updated); |
| |
| if (!dp_is_cr_done(link->cur_link_settings.lane_count, dpcd_lane_status) || |
| !dp_is_ch_eq_done(link->cur_link_settings.lane_count, dpcd_lane_status) || |
| !dp_is_symbol_locked(link->cur_link_settings.lane_count, dpcd_lane_status) || |
| !dp_is_interlane_aligned(lane_status_updated)) { |
| DC_LOG_ERROR("SST Update Payload: Link loss occurred while " |
| "polling for ACT handled."); |
| result = ACT_LINK_LOST; |
| break; |
| } |
| core_link_read_dpcd( |
| link, |
| DP_PAYLOAD_TABLE_UPDATE_STATUS, |
| &update_status.raw, |
| 1); |
| |
| if (update_status.bits.ACT_HANDLED == 1) { |
| DC_LOG_DP2("SST Update Payload: ACT handled by downstream."); |
| result = ACT_SUCCESS; |
| break; |
| } |
| |
| fsleep(5000); |
| } |
| |
| if (result == ACT_FAILED) { |
| DC_LOG_ERROR("SST Update Payload: ACT still not handled after retries, " |
| "continue on. Something is wrong with the branch."); |
| } |
| |
| return (result == ACT_SUCCESS); |
| } |
| |
| static void update_mst_stream_alloc_table( |
| struct dc_link *link, |
| struct stream_encoder *stream_enc, |
| struct hpo_dp_stream_encoder *hpo_dp_stream_enc, // TODO: Rename stream_enc to dio_stream_enc? |
| const struct dc_dp_mst_stream_allocation_table *proposed_table) |
| { |
| struct link_mst_stream_allocation work_table[MAX_CONTROLLER_NUM] = { 0 }; |
| struct link_mst_stream_allocation *dc_alloc; |
| |
| int i; |
| int j; |
| |
| /* if DRM proposed_table has more than one new payload */ |
| ASSERT(proposed_table->stream_count - |
| link->mst_stream_alloc_table.stream_count < 2); |
| |
| /* copy proposed_table to link, add stream encoder */ |
| for (i = 0; i < proposed_table->stream_count; i++) { |
| |
| for (j = 0; j < link->mst_stream_alloc_table.stream_count; j++) { |
| dc_alloc = |
| &link->mst_stream_alloc_table.stream_allocations[j]; |
| |
| if (dc_alloc->vcp_id == |
| proposed_table->stream_allocations[i].vcp_id) { |
| |
| work_table[i] = *dc_alloc; |
| work_table[i].slot_count = proposed_table->stream_allocations[i].slot_count; |
| break; /* exit j loop */ |
| } |
| } |
| |
| /* new vcp_id */ |
| if (j == link->mst_stream_alloc_table.stream_count) { |
| work_table[i].vcp_id = |
| proposed_table->stream_allocations[i].vcp_id; |
| work_table[i].slot_count = |
| proposed_table->stream_allocations[i].slot_count; |
| work_table[i].stream_enc = stream_enc; |
| work_table[i].hpo_dp_stream_enc = hpo_dp_stream_enc; |
| } |
| } |
| |
| /* update link->mst_stream_alloc_table with work_table */ |
| link->mst_stream_alloc_table.stream_count = |
| proposed_table->stream_count; |
| for (i = 0; i < MAX_CONTROLLER_NUM; i++) |
| link->mst_stream_alloc_table.stream_allocations[i] = |
| work_table[i]; |
| } |
| |
| static void remove_stream_from_alloc_table( |
| struct dc_link *link, |
| struct stream_encoder *dio_stream_enc, |
| struct hpo_dp_stream_encoder *hpo_dp_stream_enc) |
| { |
| int i = 0; |
| struct link_mst_stream_allocation_table *table = |
| &link->mst_stream_alloc_table; |
| |
| if (hpo_dp_stream_enc) { |
| for (; i < table->stream_count; i++) |
| if (hpo_dp_stream_enc == table->stream_allocations[i].hpo_dp_stream_enc) |
| break; |
| } else { |
| for (; i < table->stream_count; i++) |
| if (dio_stream_enc == table->stream_allocations[i].stream_enc) |
| break; |
| } |
| |
| if (i < table->stream_count) { |
| i++; |
| for (; i < table->stream_count; i++) |
| table->stream_allocations[i-1] = table->stream_allocations[i]; |
| memset(&table->stream_allocations[table->stream_count-1], 0, |
| sizeof(struct link_mst_stream_allocation)); |
| table->stream_count--; |
| } |
| } |
| |
| static enum dc_status deallocate_mst_payload(struct pipe_ctx *pipe_ctx) |
| { |
| struct dc_stream_state *stream = pipe_ctx->stream; |
| struct dc_link *link = stream->link; |
| struct dc_dp_mst_stream_allocation_table proposed_table = {0}; |
| struct fixed31_32 avg_time_slots_per_mtp = dc_fixpt_from_int(0); |
| int i; |
| bool mst_mode = (link->type == dc_connection_mst_branch); |
| const struct link_hwss *link_hwss = get_link_hwss(link, &pipe_ctx->link_res); |
| const struct dc_link_settings empty_link_settings = {0}; |
| DC_LOGGER_INIT(link->ctx->logger); |
| |
| /* deallocate_mst_payload is called before disable link. When mode or |
| * disable/enable monitor, new stream is created which is not in link |
| * stream[] yet. For this, payload is not allocated yet, so de-alloc |
| * should not done. For new mode set, map_resources will get engine |
| * for new stream, so stream_enc->id should be validated until here. |
| */ |
| |
| /* slot X.Y */ |
| if (link_hwss->ext.set_throttled_vcp_size) |
| link_hwss->ext.set_throttled_vcp_size(pipe_ctx, avg_time_slots_per_mtp); |
| if (link_hwss->ext.set_hblank_min_symbol_width) |
| link_hwss->ext.set_hblank_min_symbol_width(pipe_ctx, |
| &empty_link_settings, |
| avg_time_slots_per_mtp); |
| |
| if (mst_mode) { |
| /* when link is in mst mode, reply on mst manager to remove |
| * payload |
| */ |
| if (dm_helpers_dp_mst_write_payload_allocation_table( |
| stream->ctx, |
| stream, |
| &proposed_table, |
| false)) |
| update_mst_stream_alloc_table( |
| link, |
| pipe_ctx->stream_res.stream_enc, |
| pipe_ctx->stream_res.hpo_dp_stream_enc, |
| &proposed_table); |
| else |
| DC_LOG_WARNING("Failed to update" |
| "MST allocation table for" |
| "pipe idx:%d\n", |
| pipe_ctx->pipe_idx); |
| } else { |
| /* when link is no longer in mst mode (mst hub unplugged), |
| * remove payload with default dc logic |
| */ |
| remove_stream_from_alloc_table(link, pipe_ctx->stream_res.stream_enc, |
| pipe_ctx->stream_res.hpo_dp_stream_enc); |
| } |
| |
| DC_LOG_MST("%s" |
| "stream_count: %d: ", |
| __func__, |
| link->mst_stream_alloc_table.stream_count); |
| |
| for (i = 0; i < MAX_CONTROLLER_NUM; i++) { |
| DC_LOG_MST("stream_enc[%d]: %p " |
| "stream[%d].hpo_dp_stream_enc: %p " |
| "stream[%d].vcp_id: %d " |
| "stream[%d].slot_count: %d\n", |
| i, |
| (void *) link->mst_stream_alloc_table.stream_allocations[i].stream_enc, |
| i, |
| (void *) link->mst_stream_alloc_table.stream_allocations[i].hpo_dp_stream_enc, |
| i, |
| link->mst_stream_alloc_table.stream_allocations[i].vcp_id, |
| i, |
| link->mst_stream_alloc_table.stream_allocations[i].slot_count); |
| } |
| |
| /* update mst stream allocation table hardware state */ |
| if (link_hwss->ext.update_stream_allocation_table == NULL || |
| link_dp_get_encoding_format(&link->cur_link_settings) == DP_UNKNOWN_ENCODING) { |
| DC_LOG_DEBUG("Unknown encoding format\n"); |
| return DC_ERROR_UNEXPECTED; |
| } |
| |
| link_hwss->ext.update_stream_allocation_table(link, &pipe_ctx->link_res, |
| &link->mst_stream_alloc_table); |
| |
| if (mst_mode) |
| dm_helpers_dp_mst_poll_for_allocation_change_trigger( |
| stream->ctx, |
| stream); |
| |
| dm_helpers_dp_mst_update_mst_mgr_for_deallocation( |
| stream->ctx, |
| stream); |
| |
| return DC_OK; |
| } |
| |
| /* convert link_mst_stream_alloc_table to dm dp_mst_stream_alloc_table |
| * because stream_encoder is not exposed to dm |
| */ |
| static enum dc_status allocate_mst_payload(struct pipe_ctx *pipe_ctx) |
| { |
| struct dc_stream_state *stream = pipe_ctx->stream; |
| struct dc_link *link = stream->link; |
| struct dc_dp_mst_stream_allocation_table proposed_table = {0}; |
| struct fixed31_32 avg_time_slots_per_mtp; |
| struct fixed31_32 pbn; |
| struct fixed31_32 pbn_per_slot; |
| int i; |
| enum act_return_status ret; |
| const struct link_hwss *link_hwss = get_link_hwss(link, &pipe_ctx->link_res); |
| DC_LOGGER_INIT(link->ctx->logger); |
| |
| /* enable_link_dp_mst already check link->enabled_stream_count |
| * and stream is in link->stream[]. This is called during set mode, |
| * stream_enc is available. |
| */ |
| |
| /* get calculate VC payload for stream: stream_alloc */ |
| if (dm_helpers_dp_mst_write_payload_allocation_table( |
| stream->ctx, |
| stream, |
| &proposed_table, |
| true)) |
| update_mst_stream_alloc_table( |
| link, |
| pipe_ctx->stream_res.stream_enc, |
| pipe_ctx->stream_res.hpo_dp_stream_enc, |
| &proposed_table); |
| else |
| DC_LOG_WARNING("Failed to update" |
| "MST allocation table for" |
| "pipe idx:%d\n", |
| pipe_ctx->pipe_idx); |
| |
| DC_LOG_MST("%s " |
| "stream_count: %d: \n ", |
| __func__, |
| link->mst_stream_alloc_table.stream_count); |
| |
| for (i = 0; i < MAX_CONTROLLER_NUM; i++) { |
| DC_LOG_MST("stream_enc[%d]: %p " |
| "stream[%d].hpo_dp_stream_enc: %p " |
| "stream[%d].vcp_id: %d " |
| "stream[%d].slot_count: %d\n", |
| i, |
| (void *) link->mst_stream_alloc_table.stream_allocations[i].stream_enc, |
| i, |
| (void *) link->mst_stream_alloc_table.stream_allocations[i].hpo_dp_stream_enc, |
| i, |
| link->mst_stream_alloc_table.stream_allocations[i].vcp_id, |
| i, |
| link->mst_stream_alloc_table.stream_allocations[i].slot_count); |
| } |
| |
| ASSERT(proposed_table.stream_count > 0); |
| |
| /* program DP source TX for payload */ |
| if (link_hwss->ext.update_stream_allocation_table == NULL || |
| link_dp_get_encoding_format(&link->cur_link_settings) == DP_UNKNOWN_ENCODING) { |
| DC_LOG_ERROR("Failure: unknown encoding format\n"); |
| return DC_ERROR_UNEXPECTED; |
| } |
| |
| link_hwss->ext.update_stream_allocation_table(link, |
| &pipe_ctx->link_res, |
| &link->mst_stream_alloc_table); |
| |
| /* send down message */ |
| ret = dm_helpers_dp_mst_poll_for_allocation_change_trigger( |
| stream->ctx, |
| stream); |
| |
| if (ret != ACT_LINK_LOST) |
| dm_helpers_dp_mst_send_payload_allocation( |
| stream->ctx, |
| stream); |
| |
| /* slot X.Y for only current stream */ |
| pbn_per_slot = get_pbn_per_slot(stream); |
| if (pbn_per_slot.value == 0) { |
| DC_LOG_ERROR("Failure: pbn_per_slot==0 not allowed. Cannot continue, returning DC_UNSUPPORTED_VALUE.\n"); |
| return DC_UNSUPPORTED_VALUE; |
| } |
| pbn = get_pbn_from_timing(pipe_ctx); |
| avg_time_slots_per_mtp = dc_fixpt_div(pbn, pbn_per_slot); |
| |
| log_vcp_x_y(link, avg_time_slots_per_mtp); |
| |
| if (link_hwss->ext.set_throttled_vcp_size) |
| link_hwss->ext.set_throttled_vcp_size(pipe_ctx, avg_time_slots_per_mtp); |
| if (link_hwss->ext.set_hblank_min_symbol_width) |
| link_hwss->ext.set_hblank_min_symbol_width(pipe_ctx, |
| &link->cur_link_settings, |
| avg_time_slots_per_mtp); |
| |
| return DC_OK; |
| } |
| |
| struct fixed31_32 link_calculate_sst_avg_time_slots_per_mtp( |
| const struct dc_stream_state *stream, |
| const struct dc_link *link) |
| { |
| struct fixed31_32 link_bw_effective = |
| dc_fixpt_from_int( |
| dp_link_bandwidth_kbps(link, &link->cur_link_settings)); |
| struct fixed31_32 timeslot_bw_effective = |
| dc_fixpt_div_int(link_bw_effective, MAX_MTP_SLOT_COUNT); |
| struct fixed31_32 timing_bw = |
| dc_fixpt_from_int( |
| dc_bandwidth_in_kbps_from_timing(&stream->timing, |
| dc_link_get_highest_encoding_format(link))); |
| struct fixed31_32 avg_time_slots_per_mtp = |
| dc_fixpt_div(timing_bw, timeslot_bw_effective); |
| |
| return avg_time_slots_per_mtp; |
| } |
| |
| |
| static bool write_128b_132b_sst_payload_allocation_table( |
| const struct dc_stream_state *stream, |
| struct dc_link *link, |
| struct link_mst_stream_allocation_table *proposed_table, |
| bool allocate) |
| { |
| const uint8_t vc_id = 1; /// VC ID always 1 for SST |
| const uint8_t start_time_slot = 0; /// Always start at time slot 0 for SST |
| bool result = false; |
| uint8_t req_slot_count = 0; |
| struct fixed31_32 avg_time_slots_per_mtp = { 0 }; |
| union payload_table_update_status update_status = { 0 }; |
| const uint32_t max_retries = 30; |
| uint32_t retries = 0; |
| DC_LOGGER_INIT(link->ctx->logger); |
| |
| if (allocate) { |
| avg_time_slots_per_mtp = link_calculate_sst_avg_time_slots_per_mtp(stream, link); |
| req_slot_count = dc_fixpt_ceil(avg_time_slots_per_mtp); |
| /// Validation should filter out modes that exceed link BW |
| ASSERT(req_slot_count <= MAX_MTP_SLOT_COUNT); |
| if (req_slot_count > MAX_MTP_SLOT_COUNT) |
| return false; |
| } else { |
| /// Leave req_slot_count = 0 if allocate is false. |
| } |
| |
| proposed_table->stream_count = 1; /// Always 1 stream for SST |
| proposed_table->stream_allocations[0].slot_count = req_slot_count; |
| proposed_table->stream_allocations[0].vcp_id = vc_id; |
| |
| if (link->aux_access_disabled) |
| return true; |
| |
| /// Write DPCD 2C0 = 1 to start updating |
| update_status.bits.VC_PAYLOAD_TABLE_UPDATED = 1; |
| core_link_write_dpcd( |
| link, |
| DP_PAYLOAD_TABLE_UPDATE_STATUS, |
| &update_status.raw, |
| 1); |
| |
| /// Program the changes in DPCD 1C0 - 1C2 |
| ASSERT(vc_id == 1); |
| core_link_write_dpcd( |
| link, |
| DP_PAYLOAD_ALLOCATE_SET, |
| &vc_id, |
| 1); |
| |
| ASSERT(start_time_slot == 0); |
| core_link_write_dpcd( |
| link, |
| DP_PAYLOAD_ALLOCATE_START_TIME_SLOT, |
| &start_time_slot, |
| 1); |
| |
| core_link_write_dpcd( |
| link, |
| DP_PAYLOAD_ALLOCATE_TIME_SLOT_COUNT, |
| &req_slot_count, |
| 1); |
| |
| /// Poll till DPCD 2C0 read 1 |
| /// Try for at least 150ms (30 retries, with 5ms delay after each attempt) |
| |
| while (retries < max_retries) { |
| if (core_link_read_dpcd( |
| link, |
| DP_PAYLOAD_TABLE_UPDATE_STATUS, |
| &update_status.raw, |
| 1) == DC_OK) { |
| if (update_status.bits.VC_PAYLOAD_TABLE_UPDATED == 1) { |
| DC_LOG_DP2("SST Update Payload: downstream payload table updated."); |
| result = true; |
| break; |
| } |
| } else { |
| union dpcd_rev dpcdRev; |
| |
| if (core_link_read_dpcd( |
| link, |
| DP_DPCD_REV, |
| &dpcdRev.raw, |
| 1) != DC_OK) { |
| DC_LOG_ERROR("SST Update Payload: Unable to read DPCD revision " |
| "of sink while polling payload table " |
| "updated status bit."); |
| break; |
| } |
| } |
| retries++; |
| fsleep(5000); |
| } |
| |
| if (!result && retries == max_retries) { |
| DC_LOG_ERROR("SST Update Payload: Payload table not updated after retries, " |
| "continue on. Something is wrong with the branch."); |
| // TODO - DP2.0 Payload: Read and log the payload table from downstream branch |
| } |
| |
| return result; |
| } |
| |
| /* |
| * Payload allocation/deallocation for SST introduced in DP2.0 |
| */ |
| static enum dc_status update_sst_payload(struct pipe_ctx *pipe_ctx, |
| bool allocate) |
| { |
| struct dc_stream_state *stream = pipe_ctx->stream; |
| struct dc_link *link = stream->link; |
| struct link_mst_stream_allocation_table proposed_table = {0}; |
| struct fixed31_32 avg_time_slots_per_mtp; |
| const struct dc_link_settings empty_link_settings = {0}; |
| const struct link_hwss *link_hwss = get_link_hwss(link, &pipe_ctx->link_res); |
| DC_LOGGER_INIT(link->ctx->logger); |
| |
| /* slot X.Y for SST payload deallocate */ |
| if (!allocate) { |
| avg_time_slots_per_mtp = dc_fixpt_from_int(0); |
| |
| log_vcp_x_y(link, avg_time_slots_per_mtp); |
| |
| if (link_hwss->ext.set_throttled_vcp_size) |
| link_hwss->ext.set_throttled_vcp_size(pipe_ctx, |
| avg_time_slots_per_mtp); |
| if (link_hwss->ext.set_hblank_min_symbol_width) |
| link_hwss->ext.set_hblank_min_symbol_width(pipe_ctx, |
| &empty_link_settings, |
| avg_time_slots_per_mtp); |
| } |
| |
| /* calculate VC payload and update branch with new payload allocation table*/ |
| if (!write_128b_132b_sst_payload_allocation_table( |
| stream, |
| link, |
| &proposed_table, |
| allocate)) { |
| DC_LOG_ERROR("SST Update Payload: Failed to update " |
| "allocation table for " |
| "pipe idx: %d\n", |
| pipe_ctx->pipe_idx); |
| return DC_FAIL_DP_PAYLOAD_ALLOCATION; |
| } |
| |
| proposed_table.stream_allocations[0].hpo_dp_stream_enc = pipe_ctx->stream_res.hpo_dp_stream_enc; |
| |
| ASSERT(proposed_table.stream_count == 1); |
| |
| //TODO - DP2.0 Logging: Instead of hpo_dp_stream_enc pointer, log instance id |
| DC_LOG_DP2("SST Update Payload: hpo_dp_stream_enc: %p " |
| "vcp_id: %d " |
| "slot_count: %d\n", |
| (void *) proposed_table.stream_allocations[0].hpo_dp_stream_enc, |
| proposed_table.stream_allocations[0].vcp_id, |
| proposed_table.stream_allocations[0].slot_count); |
| |
| /* program DP source TX for payload */ |
| link_hwss->ext.update_stream_allocation_table(link, &pipe_ctx->link_res, |
| &proposed_table); |
| |
| /* poll for ACT handled */ |
| if (!poll_for_allocation_change_trigger(link)) { |
| // Failures will result in blackscreen and errors logged |
| BREAK_TO_DEBUGGER(); |
| } |
| |
| /* slot X.Y for SST payload allocate */ |
| if (allocate && link_dp_get_encoding_format(&link->cur_link_settings) == |
| DP_128b_132b_ENCODING) { |
| avg_time_slots_per_mtp = link_calculate_sst_avg_time_slots_per_mtp(stream, link); |
| |
| log_vcp_x_y(link, avg_time_slots_per_mtp); |
| |
| if (link_hwss->ext.set_throttled_vcp_size) |
| link_hwss->ext.set_throttled_vcp_size(pipe_ctx, |
| avg_time_slots_per_mtp); |
| if (link_hwss->ext.set_hblank_min_symbol_width) |
| link_hwss->ext.set_hblank_min_symbol_width(pipe_ctx, |
| &link->cur_link_settings, |
| avg_time_slots_per_mtp); |
| } |
| |
| /* Always return DC_OK. |
| * If part of sequence fails, log failure(s) and show blackscreen |
| */ |
| return DC_OK; |
| } |
| |
| enum dc_status link_reduce_mst_payload(struct pipe_ctx *pipe_ctx, uint32_t bw_in_kbps) |
| { |
| struct dc_stream_state *stream = pipe_ctx->stream; |
| struct dc_link *link = stream->link; |
| struct fixed31_32 avg_time_slots_per_mtp; |
| struct fixed31_32 pbn; |
| struct fixed31_32 pbn_per_slot; |
| struct dc_dp_mst_stream_allocation_table proposed_table = {0}; |
| uint8_t i; |
| const struct link_hwss *link_hwss = get_link_hwss(link, &pipe_ctx->link_res); |
| DC_LOGGER_INIT(link->ctx->logger); |
| |
| /* decrease throttled vcp size */ |
| pbn_per_slot = get_pbn_per_slot(stream); |
| pbn = get_pbn_from_bw_in_kbps(bw_in_kbps); |
| avg_time_slots_per_mtp = dc_fixpt_div(pbn, pbn_per_slot); |
| |
| if (link_hwss->ext.set_throttled_vcp_size) |
| link_hwss->ext.set_throttled_vcp_size(pipe_ctx, avg_time_slots_per_mtp); |
| if (link_hwss->ext.set_hblank_min_symbol_width) |
| link_hwss->ext.set_hblank_min_symbol_width(pipe_ctx, |
| &link->cur_link_settings, |
| avg_time_slots_per_mtp); |
| |
| /* send ALLOCATE_PAYLOAD sideband message with updated pbn */ |
| dm_helpers_dp_mst_send_payload_allocation( |
| stream->ctx, |
| stream); |
| |
| /* notify immediate branch device table update */ |
| if (dm_helpers_dp_mst_write_payload_allocation_table( |
| stream->ctx, |
| stream, |
| &proposed_table, |
| true)) { |
| /* update mst stream allocation table software state */ |
| update_mst_stream_alloc_table( |
| link, |
| pipe_ctx->stream_res.stream_enc, |
| pipe_ctx->stream_res.hpo_dp_stream_enc, |
| &proposed_table); |
| } else { |
| DC_LOG_WARNING("Failed to update" |
| "MST allocation table for" |
| "pipe idx:%d\n", |
| pipe_ctx->pipe_idx); |
| } |
| |
| DC_LOG_MST("%s " |
| "stream_count: %d: \n ", |
| __func__, |
| link->mst_stream_alloc_table.stream_count); |
| |
| for (i = 0; i < MAX_CONTROLLER_NUM; i++) { |
| DC_LOG_MST("stream_enc[%d]: %p " |
| "stream[%d].hpo_dp_stream_enc: %p " |
| "stream[%d].vcp_id: %d " |
| "stream[%d].slot_count: %d\n", |
| i, |
| (void *) link->mst_stream_alloc_table.stream_allocations[i].stream_enc, |
| i, |
| (void *) link->mst_stream_alloc_table.stream_allocations[i].hpo_dp_stream_enc, |
| i, |
| link->mst_stream_alloc_table.stream_allocations[i].vcp_id, |
| i, |
| link->mst_stream_alloc_table.stream_allocations[i].slot_count); |
| } |
| |
| ASSERT(proposed_table.stream_count > 0); |
| |
| /* update mst stream allocation table hardware state */ |
| if (link_hwss->ext.update_stream_allocation_table == NULL || |
| link_dp_get_encoding_format(&link->cur_link_settings) == DP_UNKNOWN_ENCODING) { |
| DC_LOG_ERROR("Failure: unknown encoding format\n"); |
| return DC_ERROR_UNEXPECTED; |
| } |
| |
| link_hwss->ext.update_stream_allocation_table(link, &pipe_ctx->link_res, |
| &link->mst_stream_alloc_table); |
| |
| /* poll for immediate branch device ACT handled */ |
| dm_helpers_dp_mst_poll_for_allocation_change_trigger( |
| stream->ctx, |
| stream); |
| |
| return DC_OK; |
| } |
| |
| enum dc_status link_increase_mst_payload(struct pipe_ctx *pipe_ctx, uint32_t bw_in_kbps) |
| { |
| struct dc_stream_state *stream = pipe_ctx->stream; |
| struct dc_link *link = stream->link; |
| struct fixed31_32 avg_time_slots_per_mtp; |
| struct fixed31_32 pbn; |
| struct fixed31_32 pbn_per_slot; |
| struct dc_dp_mst_stream_allocation_table proposed_table = {0}; |
| uint8_t i; |
| enum act_return_status ret; |
| const struct link_hwss *link_hwss = get_link_hwss(link, &pipe_ctx->link_res); |
| DC_LOGGER_INIT(link->ctx->logger); |
| |
| /* notify immediate branch device table update */ |
| if (dm_helpers_dp_mst_write_payload_allocation_table( |
| stream->ctx, |
| stream, |
| &proposed_table, |
| true)) { |
| /* update mst stream allocation table software state */ |
| update_mst_stream_alloc_table( |
| link, |
| pipe_ctx->stream_res.stream_enc, |
| pipe_ctx->stream_res.hpo_dp_stream_enc, |
| &proposed_table); |
| } |
| |
| DC_LOG_MST("%s " |
| "stream_count: %d: \n ", |
| __func__, |
| link->mst_stream_alloc_table.stream_count); |
| |
| for (i = 0; i < MAX_CONTROLLER_NUM; i++) { |
| DC_LOG_MST("stream_enc[%d]: %p " |
| "stream[%d].hpo_dp_stream_enc: %p " |
| "stream[%d].vcp_id: %d " |
| "stream[%d].slot_count: %d\n", |
| i, |
| (void *) link->mst_stream_alloc_table.stream_allocations[i].stream_enc, |
| i, |
| (void *) link->mst_stream_alloc_table.stream_allocations[i].hpo_dp_stream_enc, |
| i, |
| link->mst_stream_alloc_table.stream_allocations[i].vcp_id, |
| i, |
| link->mst_stream_alloc_table.stream_allocations[i].slot_count); |
| } |
| |
| ASSERT(proposed_table.stream_count > 0); |
| |
| /* update mst stream allocation table hardware state */ |
| if (link_hwss->ext.update_stream_allocation_table == NULL || |
| link_dp_get_encoding_format(&link->cur_link_settings) == DP_UNKNOWN_ENCODING) { |
| DC_LOG_ERROR("Failure: unknown encoding format\n"); |
| return DC_ERROR_UNEXPECTED; |
| } |
| |
| link_hwss->ext.update_stream_allocation_table(link, &pipe_ctx->link_res, |
| &link->mst_stream_alloc_table); |
| |
| /* poll for immediate branch device ACT handled */ |
| ret = dm_helpers_dp_mst_poll_for_allocation_change_trigger( |
| stream->ctx, |
| stream); |
| |
| if (ret != ACT_LINK_LOST) { |
| /* send ALLOCATE_PAYLOAD sideband message with updated pbn */ |
| dm_helpers_dp_mst_send_payload_allocation( |
| stream->ctx, |
| stream); |
| } |
| |
| /* increase throttled vcp size */ |
| pbn = get_pbn_from_bw_in_kbps(bw_in_kbps); |
| pbn_per_slot = get_pbn_per_slot(stream); |
| avg_time_slots_per_mtp = dc_fixpt_div(pbn, pbn_per_slot); |
| |
| if (link_hwss->ext.set_throttled_vcp_size) |
| link_hwss->ext.set_throttled_vcp_size(pipe_ctx, avg_time_slots_per_mtp); |
| if (link_hwss->ext.set_hblank_min_symbol_width) |
| link_hwss->ext.set_hblank_min_symbol_width(pipe_ctx, |
| &link->cur_link_settings, |
| avg_time_slots_per_mtp); |
| |
| return DC_OK; |
| } |
| |
| static void disable_link_dp(struct dc_link *link, |
| const struct link_resource *link_res, |
| enum signal_type signal) |
| { |
| struct dc_link_settings link_settings = link->cur_link_settings; |
| |
| if (signal == SIGNAL_TYPE_DISPLAY_PORT_MST && |
| link->mst_stream_alloc_table.stream_count > 0) |
| /* disable MST link only when last vc payload is deallocated */ |
| return; |
| |
| dp_disable_link_phy(link, link_res, signal); |
| |
| if (link->connector_signal == SIGNAL_TYPE_EDP) { |
| if (!link->skip_implict_edp_power_control) |
| link->dc->hwss.edp_power_control(link, false); |
| } |
| |
| if (signal == SIGNAL_TYPE_DISPLAY_PORT_MST) |
| /* set the sink to SST mode after disabling the link */ |
| enable_mst_on_sink(link, false); |
| |
| if (link_dp_get_encoding_format(&link_settings) == |
| DP_8b_10b_ENCODING) { |
| dp_set_fec_enable(link, false); |
| dp_set_fec_ready(link, link_res, false); |
| } |
| } |
| |
| static void disable_link(struct dc_link *link, |
| const struct link_resource *link_res, |
| enum signal_type signal) |
| { |
| if (dc_is_dp_signal(signal)) { |
| disable_link_dp(link, link_res, signal); |
| } else if (signal != SIGNAL_TYPE_VIRTUAL) { |
| link->dc->hwss.disable_link_output(link, link_res, signal); |
| } |
| |
| if (signal == SIGNAL_TYPE_DISPLAY_PORT_MST) { |
| /* MST disable link only when no stream use the link */ |
| if (link->mst_stream_alloc_table.stream_count <= 0) |
| link->link_status.link_active = false; |
| } else { |
| link->link_status.link_active = false; |
| } |
| } |
| |
| static void enable_link_hdmi(struct pipe_ctx *pipe_ctx) |
| { |
| struct dc_stream_state *stream = pipe_ctx->stream; |
| struct dc_link *link = stream->link; |
| enum dc_color_depth display_color_depth; |
| enum engine_id eng_id; |
| struct ext_hdmi_settings settings = {0}; |
| bool is_over_340mhz = false; |
| bool is_vga_mode = (stream->timing.h_addressable == 640) |
| && (stream->timing.v_addressable == 480); |
| struct dc *dc = pipe_ctx->stream->ctx->dc; |
| const struct link_hwss *link_hwss = get_link_hwss(link, &pipe_ctx->link_res); |
| |
| if (stream->phy_pix_clk == 0) |
| stream->phy_pix_clk = stream->timing.pix_clk_100hz / 10; |
| if (stream->phy_pix_clk > 340000) |
| is_over_340mhz = true; |
| |
| if (dc_is_hdmi_signal(pipe_ctx->stream->signal)) { |
| unsigned short masked_chip_caps = pipe_ctx->stream->link->chip_caps & |
| EXT_DISPLAY_PATH_CAPS__EXT_CHIP_MASK; |
| if (masked_chip_caps == EXT_DISPLAY_PATH_CAPS__HDMI20_TISN65DP159RSBT) { |
| /* DP159, Retimer settings */ |
| eng_id = pipe_ctx->stream_res.stream_enc->id; |
| |
| if (get_ext_hdmi_settings(pipe_ctx, eng_id, &settings)) { |
| write_i2c_retimer_setting(pipe_ctx, |
| is_vga_mode, is_over_340mhz, &settings); |
| } else { |
| write_i2c_default_retimer_setting(pipe_ctx, |
| is_vga_mode, is_over_340mhz); |
| } |
| } else if (masked_chip_caps == EXT_DISPLAY_PATH_CAPS__HDMI20_PI3EQX1204) { |
| /* PI3EQX1204, Redriver settings */ |
| write_i2c_redriver_setting(pipe_ctx, is_over_340mhz); |
| } |
| } |
| |
| if (dc_is_hdmi_signal(pipe_ctx->stream->signal)) |
| write_scdc_data( |
| stream->link->ddc, |
| stream->phy_pix_clk, |
| stream->timing.flags.LTE_340MCSC_SCRAMBLE); |
| |
| memset(&stream->link->cur_link_settings, 0, |
| sizeof(struct dc_link_settings)); |
| |
| display_color_depth = stream->timing.display_color_depth; |
| if (stream->timing.pixel_encoding == PIXEL_ENCODING_YCBCR422) |
| display_color_depth = COLOR_DEPTH_888; |
| |
| /* We need to enable stream encoder for TMDS first to apply 1/4 TMDS |
| * character clock in case that beyond 340MHz. |
| */ |
| if (dc_is_hdmi_tmds_signal(pipe_ctx->stream->signal)) |
| link_hwss->setup_stream_encoder(pipe_ctx); |
| |
| dc->hwss.enable_tmds_link_output( |
| link, |
| &pipe_ctx->link_res, |
| pipe_ctx->stream->signal, |
| pipe_ctx->clock_source->id, |
| display_color_depth, |
| stream->phy_pix_clk); |
| |
| if (dc_is_hdmi_signal(pipe_ctx->stream->signal)) |
| read_scdc_data(link->ddc); |
| } |
| |
| static enum dc_status enable_link_dp(struct dc_state *state, |
| struct pipe_ctx *pipe_ctx) |
| { |
| struct dc_stream_state *stream = pipe_ctx->stream; |
| enum dc_status status; |
| bool skip_video_pattern; |
| struct dc_link *link = stream->link; |
| const struct dc_link_settings *link_settings = |
| &pipe_ctx->link_config.dp_link_settings; |
| bool fec_enable; |
| int i; |
| bool apply_seamless_boot_optimization = false; |
| uint32_t bl_oled_enable_delay = 50; // in ms |
| uint32_t post_oui_delay = 30; // 30ms |
| /* Reduce link bandwidth between failed link training attempts. */ |
| bool do_fallback = false; |
| int lt_attempts = LINK_TRAINING_ATTEMPTS; |
| |
| // Increase retry count if attempting DP1.x on FIXED_VS link |
| if ((link->chip_caps & EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN) && |
| link_dp_get_encoding_format(link_settings) == DP_8b_10b_ENCODING) |
| lt_attempts = 10; |
| |
| // check for seamless boot |
| for (i = 0; i < state->stream_count; i++) { |
| if (state->streams[i]->apply_seamless_boot_optimization) { |
| apply_seamless_boot_optimization = true; |
| break; |
| } |
| } |
| |
| /* Train with fallback when enabling DPIA link. Conventional links are |
| * trained with fallback during sink detection. |
| */ |
| if (link->ep_type == DISPLAY_ENDPOINT_USB4_DPIA) |
| do_fallback = true; |
| |
| /* |
| * Temporary w/a to get DP2.0 link rates to work with SST. |
| * TODO DP2.0 - Workaround: Remove w/a if and when the issue is resolved. |
| */ |
| if (link_dp_get_encoding_format(link_settings) == DP_128b_132b_ENCODING && |
| pipe_ctx->stream->signal == SIGNAL_TYPE_DISPLAY_PORT && |
| link->dc->debug.set_mst_en_for_sst) { |
| enable_mst_on_sink(link, true); |
| } |
| if (pipe_ctx->stream->signal == SIGNAL_TYPE_EDP) { |
| /*in case it is not on*/ |
| if (!link->dc->config.edp_no_power_sequencing) |
| link->dc->hwss.edp_power_control(link, true); |
| link->dc->hwss.edp_wait_for_hpd_ready(link, true); |
| } |
| |
| if (link_dp_get_encoding_format(link_settings) == DP_128b_132b_ENCODING) { |
| /* TODO - DP2.0 HW: calculate 32 symbol clock for HPO encoder */ |
| } else { |
| pipe_ctx->stream_res.pix_clk_params.requested_sym_clk = |
| link_settings->link_rate * LINK_RATE_REF_FREQ_IN_KHZ; |
| if (state->clk_mgr && !apply_seamless_boot_optimization) |
| state->clk_mgr->funcs->update_clocks(state->clk_mgr, |
| state, false); |
| } |
| |
| // during mode switch we do DP_SET_POWER off then on, and OUI is lost |
| dpcd_set_source_specific_data(link); |
| if (link->dpcd_sink_ext_caps.raw != 0) { |
| post_oui_delay += link->panel_config.pps.extra_post_OUI_ms; |
| msleep(post_oui_delay); |
| } |
| |
| // similarly, mode switch can cause loss of cable ID |
| dpcd_write_cable_id_to_dprx(link); |
| |
| skip_video_pattern = true; |
| |
| if (link_settings->link_rate == LINK_RATE_LOW) |
| skip_video_pattern = false; |
| |
| if (perform_link_training_with_retries(link_settings, |
| skip_video_pattern, |
| lt_attempts, |
| pipe_ctx, |
| pipe_ctx->stream->signal, |
| do_fallback)) { |
| status = DC_OK; |
| } else { |
| status = DC_FAIL_DP_LINK_TRAINING; |
| } |
| |
| if (link->preferred_training_settings.fec_enable) |
| fec_enable = *link->preferred_training_settings.fec_enable; |
| else |
| fec_enable = true; |
| |
| if (link_dp_get_encoding_format(link_settings) == DP_8b_10b_ENCODING) |
| dp_set_fec_enable(link, fec_enable); |
| |
| // during mode set we do DP_SET_POWER off then on, aux writes are lost |
| if (link->dpcd_sink_ext_caps.bits.oled == 1 || |
| link->dpcd_sink_ext_caps.bits.sdr_aux_backlight_control == 1 || |
| link->dpcd_sink_ext_caps.bits.hdr_aux_backlight_control == 1) { |
| set_default_brightness_aux(link); |
| if (link->dpcd_sink_ext_caps.bits.oled == 1) |
| msleep(bl_oled_enable_delay); |
| edp_backlight_enable_aux(link, true); |
| } |
| |
| return status; |
| } |
| |
| static enum dc_status enable_link_edp( |
| struct dc_state *state, |
| struct pipe_ctx *pipe_ctx) |
| { |
| return enable_link_dp(state, pipe_ctx); |
| } |
| |
| static void enable_link_lvds(struct pipe_ctx *pipe_ctx) |
| { |
| struct dc_stream_state *stream = pipe_ctx->stream; |
| struct dc_link *link = stream->link; |
| struct dc *dc = stream->ctx->dc; |
| |
| if (stream->phy_pix_clk == 0) |
| stream->phy_pix_clk = stream->timing.pix_clk_100hz / 10; |
| |
| memset(&stream->link->cur_link_settings, 0, |
| sizeof(struct dc_link_settings)); |
| dc->hwss.enable_lvds_link_output( |
| link, |
| &pipe_ctx->link_res, |
| pipe_ctx->clock_source->id, |
| stream->phy_pix_clk); |
| |
| } |
| |
| static enum dc_status enable_link_dp_mst( |
| struct dc_state *state, |
| struct pipe_ctx *pipe_ctx) |
| { |
| struct dc_link *link = pipe_ctx->stream->link; |
| unsigned char mstm_cntl; |
| |
| /* sink signal type after MST branch is MST. Multiple MST sinks |
| * share one link. Link DP PHY is enable or training only once. |
| */ |
| if (link->link_status.link_active) |
| return DC_OK; |
| |
| /* clear payload table */ |
| core_link_read_dpcd(link, DP_MSTM_CTRL, &mstm_cntl, 1); |
| if (mstm_cntl & DP_MST_EN) |
| dm_helpers_dp_mst_clear_payload_allocation_table(link->ctx, link); |
| |
| /* to make sure the pending down rep can be processed |
| * before enabling the link |
| */ |
| dm_helpers_dp_mst_poll_pending_down_reply(link->ctx, link); |
| |
| /* set the sink to MST mode before enabling the link */ |
| enable_mst_on_sink(link, true); |
| |
| return enable_link_dp(state, pipe_ctx); |
| } |
| |
| static enum dc_status enable_link( |
| struct dc_state *state, |
| struct pipe_ctx *pipe_ctx) |
| { |
| enum dc_status status = DC_ERROR_UNEXPECTED; |
| struct dc_stream_state *stream = pipe_ctx->stream; |
| struct dc_link *link = stream->link; |
| |
| /* There's some scenarios where driver is unloaded with display |
| * still enabled. When driver is reloaded, it may cause a display |
| * to not light up if there is a mismatch between old and new |
| * link settings. Need to call disable first before enabling at |
| * new link settings. |
| */ |
| if (link->link_status.link_active) |
| disable_link(link, &pipe_ctx->link_res, pipe_ctx->stream->signal); |
| |
| switch (pipe_ctx->stream->signal) { |
| case SIGNAL_TYPE_DISPLAY_PORT: |
| status = enable_link_dp(state, pipe_ctx); |
| break; |
| case SIGNAL_TYPE_EDP: |
| status = enable_link_edp(state, pipe_ctx); |
| break; |
| case SIGNAL_TYPE_DISPLAY_PORT_MST: |
| status = enable_link_dp_mst(state, pipe_ctx); |
| msleep(200); |
| break; |
| case SIGNAL_TYPE_DVI_SINGLE_LINK: |
| case SIGNAL_TYPE_DVI_DUAL_LINK: |
| case SIGNAL_TYPE_HDMI_TYPE_A: |
| enable_link_hdmi(pipe_ctx); |
| status = DC_OK; |
| break; |
| case SIGNAL_TYPE_LVDS: |
| enable_link_lvds(pipe_ctx); |
| status = DC_OK; |
| break; |
| case SIGNAL_TYPE_VIRTUAL: |
| status = DC_OK; |
| break; |
| default: |
| break; |
| } |
| |
| if (status == DC_OK) { |
| pipe_ctx->stream->link->link_status.link_active = true; |
| } |
| |
| return status; |
| } |
| |
| static bool allocate_usb4_bandwidth_for_stream(struct dc_stream_state *stream, int bw) |
| { |
| struct dc_link *link = stream->sink->link; |
| int req_bw = bw; |
| |
| DC_LOGGER_INIT(link->ctx->logger); |
| |
| if (!link->dpia_bw_alloc_config.bw_alloc_enabled) |
| return false; |
| |
| if (stream->signal == SIGNAL_TYPE_DISPLAY_PORT_MST) { |
| int sink_index = 0; |
| int i = 0; |
| |
| for (i = 0; i < link->sink_count; i++) { |
| if (link->remote_sinks[i] == NULL) |
| continue; |
| |
| if (stream->sink->sink_id != link->remote_sinks[i]->sink_id) |
| req_bw += link->dpia_bw_alloc_config.remote_sink_req_bw[i]; |
| else |
| sink_index = i; |
| } |
| |
| link->dpia_bw_alloc_config.remote_sink_req_bw[sink_index] = bw; |
| } |
| |
| /* get dp overhead for dp tunneling */ |
| link->dpia_bw_alloc_config.dp_overhead = link_dp_dpia_get_dp_overhead_in_dp_tunneling(link); |
| req_bw += link->dpia_bw_alloc_config.dp_overhead; |
| |
| if (link_dp_dpia_allocate_usb4_bandwidth_for_stream(link, req_bw)) { |
| if (req_bw <= link->dpia_bw_alloc_config.allocated_bw) { |
| DC_LOG_DEBUG("%s, Success in allocate bw for link(%d), allocated_bw(%d), dp_overhead(%d)\n", |
| __func__, link->link_index, link->dpia_bw_alloc_config.allocated_bw, |
| link->dpia_bw_alloc_config.dp_overhead); |
| } else { |
| // Cannot get the required bandwidth. |
| DC_LOG_ERROR("%s, Failed to allocate bw for link(%d), allocated_bw(%d), dp_overhead(%d)\n", |
| __func__, link->link_index, link->dpia_bw_alloc_config.allocated_bw, |
| link->dpia_bw_alloc_config.dp_overhead); |
| return false; |
| } |
| } else { |
| DC_LOG_DEBUG("%s, usb4 request bw timeout\n", __func__); |
| return false; |
| } |
| |
| if (stream->signal == SIGNAL_TYPE_DISPLAY_PORT_MST) { |
| int i = 0; |
| |
| for (i = 0; i < link->sink_count; i++) { |
| if (link->remote_sinks[i] == NULL) |
| continue; |
| DC_LOG_DEBUG("%s, remote_sink=%s, request_bw=%d\n", __func__, |
| (const char *)(&link->remote_sinks[i]->edid_caps.display_name[0]), |
| link->dpia_bw_alloc_config.remote_sink_req_bw[i]); |
| } |
| } |
| |
| return true; |
| } |
| |
| static bool allocate_usb4_bandwidth(struct dc_stream_state *stream) |
| { |
| bool ret; |
| |
| int bw = dc_bandwidth_in_kbps_from_timing(&stream->timing, |
| dc_link_get_highest_encoding_format(stream->sink->link)); |
| |
| ret = allocate_usb4_bandwidth_for_stream(stream, bw); |
| |
| return ret; |
| } |
| |
| static bool deallocate_usb4_bandwidth(struct dc_stream_state *stream) |
| { |
| bool ret; |
| |
| ret = allocate_usb4_bandwidth_for_stream(stream, 0); |
| |
| return ret; |
| } |
| |
| void link_set_dpms_off(struct pipe_ctx *pipe_ctx) |
| { |
| struct dc *dc = pipe_ctx->stream->ctx->dc; |
| struct dc_stream_state *stream = pipe_ctx->stream; |
| struct dc_link *link = stream->sink->link; |
| struct vpg *vpg = pipe_ctx->stream_res.stream_enc->vpg; |
| |
| DC_LOGGER_INIT(pipe_ctx->stream->ctx->logger); |
| |
| ASSERT(is_master_pipe_for_link(link, pipe_ctx)); |
| |
| if (dp_is_128b_132b_signal(pipe_ctx)) |
| vpg = pipe_ctx->stream_res.hpo_dp_stream_enc->vpg; |
| if (dc_is_virtual_signal(pipe_ctx->stream->signal)) |
| return; |
| |
| if (pipe_ctx->stream->sink) { |
| if (pipe_ctx->stream->sink->sink_signal != SIGNAL_TYPE_VIRTUAL && |
| pipe_ctx->stream->sink->sink_signal != SIGNAL_TYPE_NONE) { |
| DC_LOG_DC("%s pipe_ctx dispname=%s signal=%x\n", __func__, |
| pipe_ctx->stream->sink->edid_caps.display_name, |
| pipe_ctx->stream->signal); |
| } |
| } |
| |
| if (!pipe_ctx->stream->sink->edid_caps.panel_patch.skip_avmute) { |
| if (dc_is_hdmi_signal(pipe_ctx->stream->signal)) |
| set_avmute(pipe_ctx, true); |
| } |
| |
| dc->hwss.disable_audio_stream(pipe_ctx); |
| |
| update_psp_stream_config(pipe_ctx, true); |
| dc->hwss.blank_stream(pipe_ctx); |
| |
| if (pipe_ctx->stream->link->ep_type == DISPLAY_ENDPOINT_USB4_DPIA) |
| deallocate_usb4_bandwidth(pipe_ctx->stream); |
| |
| if (pipe_ctx->stream->signal == SIGNAL_TYPE_DISPLAY_PORT_MST) |
| deallocate_mst_payload(pipe_ctx); |
| else if (pipe_ctx->stream->signal == SIGNAL_TYPE_DISPLAY_PORT && |
| dp_is_128b_132b_signal(pipe_ctx)) |
| update_sst_payload(pipe_ctx, false); |
| |
| if (dc_is_hdmi_signal(pipe_ctx->stream->signal)) { |
| struct ext_hdmi_settings settings = {0}; |
| enum engine_id eng_id = pipe_ctx->stream_res.stream_enc->id; |
| |
| unsigned short masked_chip_caps = link->chip_caps & |
| EXT_DISPLAY_PATH_CAPS__EXT_CHIP_MASK; |
| //Need to inform that sink is going to use legacy HDMI mode. |
| write_scdc_data( |
| link->ddc, |
| 165000,//vbios only handles 165Mhz. |
| false); |
| if (masked_chip_caps == EXT_DISPLAY_PATH_CAPS__HDMI20_TISN65DP159RSBT) { |
| /* DP159, Retimer settings */ |
| if (get_ext_hdmi_settings(pipe_ctx, eng_id, &settings)) |
| write_i2c_retimer_setting(pipe_ctx, |
| false, false, &settings); |
| else |
| write_i2c_default_retimer_setting(pipe_ctx, |
| false, false); |
| } else if (masked_chip_caps == EXT_DISPLAY_PATH_CAPS__HDMI20_PI3EQX1204) { |
| /* PI3EQX1204, Redriver settings */ |
| write_i2c_redriver_setting(pipe_ctx, false); |
| } |
| } |
| |
| if (pipe_ctx->stream->signal == SIGNAL_TYPE_DISPLAY_PORT && |
| !dp_is_128b_132b_signal(pipe_ctx)) { |
| |
| /* In DP1.x SST mode, our encoder will go to TPS1 |
| * when link is on but stream is off. |
| * Disabling link before stream will avoid exposing TPS1 pattern |
| * during the disable sequence as it will confuse some receivers |
| * state machine. |
| * In DP2 or MST mode, our encoder will stay video active |
| */ |
| disable_link(pipe_ctx->stream->link, &pipe_ctx->link_res, pipe_ctx->stream->signal); |
| dc->hwss.disable_stream(pipe_ctx); |
| } else { |
| dc->hwss.disable_stream(pipe_ctx); |
| disable_link(pipe_ctx->stream->link, &pipe_ctx->link_res, pipe_ctx->stream->signal); |
| } |
| |
| if (pipe_ctx->stream->timing.flags.DSC) { |
| if (dc_is_dp_signal(pipe_ctx->stream->signal)) |
| link_set_dsc_enable(pipe_ctx, false); |
| } |
| if (dp_is_128b_132b_signal(pipe_ctx)) { |
| if (pipe_ctx->stream_res.tg->funcs->set_out_mux) |
| pipe_ctx->stream_res.tg->funcs->set_out_mux(pipe_ctx->stream_res.tg, OUT_MUX_DIO); |
| } |
| |
| if (vpg && vpg->funcs->vpg_powerdown) |
| vpg->funcs->vpg_powerdown(vpg); |
| |
| /* for psp not exist case */ |
| if (link->connector_signal == SIGNAL_TYPE_EDP && dc->debug.psp_disabled_wa) { |
| /* reset internal save state to default since eDP is off */ |
| enum dp_panel_mode panel_mode = dp_get_panel_mode(pipe_ctx->stream->link); |
| /* since current psp not loaded, we need to reset it to default*/ |
| link->panel_mode = panel_mode; |
| } |
| } |
| |
| void link_set_dpms_on( |
| struct dc_state *state, |
| struct pipe_ctx *pipe_ctx) |
| { |
| struct dc *dc = pipe_ctx->stream->ctx->dc; |
| struct dc_stream_state *stream = pipe_ctx->stream; |
| struct dc_link *link = stream->sink->link; |
| enum dc_status status; |
| struct link_encoder *link_enc; |
| enum otg_out_mux_dest otg_out_dest = OUT_MUX_DIO; |
| struct vpg *vpg = pipe_ctx->stream_res.stream_enc->vpg; |
| const struct link_hwss *link_hwss = get_link_hwss(link, &pipe_ctx->link_res); |
| bool apply_edp_fast_boot_optimization = |
| pipe_ctx->stream->apply_edp_fast_boot_optimization; |
| |
| DC_LOGGER_INIT(pipe_ctx->stream->ctx->logger); |
| |
| ASSERT(is_master_pipe_for_link(link, pipe_ctx)); |
| |
| if (dp_is_128b_132b_signal(pipe_ctx)) |
| vpg = pipe_ctx->stream_res.hpo_dp_stream_enc->vpg; |
| if (dc_is_virtual_signal(pipe_ctx->stream->signal)) |
| return; |
| |
| if (pipe_ctx->stream->sink) { |
| if (pipe_ctx->stream->sink->sink_signal != SIGNAL_TYPE_VIRTUAL && |
| pipe_ctx->stream->sink->sink_signal != SIGNAL_TYPE_NONE) { |
| DC_LOG_DC("%s pipe_ctx dispname=%s signal=%x\n", __func__, |
| pipe_ctx->stream->sink->edid_caps.display_name, |
| pipe_ctx->stream->signal); |
| } |
| } |
| |
| link_enc = link_enc_cfg_get_link_enc(link); |
| ASSERT(link_enc); |
| |
| if (!dc_is_virtual_signal(pipe_ctx->stream->signal) |
| && !dp_is_128b_132b_signal(pipe_ctx)) { |
| struct stream_encoder *stream_enc = pipe_ctx->stream_res.stream_enc; |
| |
| if (link_enc) |
| link_enc->funcs->setup( |
| link_enc, |
| pipe_ctx->stream->signal); |
| |
| if (stream_enc && stream_enc->funcs->dig_stream_enable) |
| stream_enc->funcs->dig_stream_enable( |
| stream_enc, |
| pipe_ctx->stream->signal, 1); |
| } |
| |
| pipe_ctx->stream->link->link_state_valid = true; |
| |
| if (pipe_ctx->stream_res.tg->funcs->set_out_mux) { |
| if (dp_is_128b_132b_signal(pipe_ctx)) |
| otg_out_dest = OUT_MUX_HPO_DP; |
| else |
| otg_out_dest = OUT_MUX_DIO; |
| pipe_ctx->stream_res.tg->funcs->set_out_mux(pipe_ctx->stream_res.tg, otg_out_dest); |
| } |
| |
| link_hwss->setup_stream_attribute(pipe_ctx); |
| |
| pipe_ctx->stream->apply_edp_fast_boot_optimization = false; |
| |
| // Enable VPG before building infoframe |
| if (vpg && vpg->funcs->vpg_poweron) |
| vpg->funcs->vpg_poweron(vpg); |
| |
| resource_build_info_frame(pipe_ctx); |
| dc->hwss.update_info_frame(pipe_ctx); |
| |
| if (dc_is_dp_signal(pipe_ctx->stream->signal)) |
| dp_trace_source_sequence(link, DPCD_SOURCE_SEQ_AFTER_UPDATE_INFO_FRAME); |
| |
| /* Do not touch link on seamless boot optimization. */ |
| if (pipe_ctx->stream->apply_seamless_boot_optimization) { |
| pipe_ctx->stream->dpms_off = false; |
| |
| /* Still enable stream features & audio on seamless boot for DP external displays */ |
| if (pipe_ctx->stream->signal == SIGNAL_TYPE_DISPLAY_PORT) { |
| enable_stream_features(pipe_ctx); |
| dc->hwss.enable_audio_stream(pipe_ctx); |
| } |
| |
| update_psp_stream_config(pipe_ctx, false); |
| return; |
| } |
| |
| /* eDP lit up by bios already, no need to enable again. */ |
| if (pipe_ctx->stream->signal == SIGNAL_TYPE_EDP && |
| apply_edp_fast_boot_optimization && |
| !pipe_ctx->stream->timing.flags.DSC && |
| !pipe_ctx->next_odm_pipe) { |
| pipe_ctx->stream->dpms_off = false; |
| update_psp_stream_config(pipe_ctx, false); |
| return; |
| } |
| |
| if (pipe_ctx->stream->dpms_off) |
| return; |
| |
| /* Have to setup DSC before DIG FE and BE are connected (which happens before the |
| * link training). This is to make sure the bandwidth sent to DIG BE won't be |
| * bigger than what the link and/or DIG BE can handle. VBID[6]/CompressedStream_flag |
| * will be automatically set at a later time when the video is enabled |
| * (DP_VID_STREAM_EN = 1). |
| */ |
| if (pipe_ctx->stream->timing.flags.DSC) { |
| if (dc_is_dp_signal(pipe_ctx->stream->signal) || |
| dc_is_virtual_signal(pipe_ctx->stream->signal)) |
| link_set_dsc_enable(pipe_ctx, true); |
| } |
| |
| status = enable_link(state, pipe_ctx); |
| |
| if (status != DC_OK) { |
| DC_LOG_WARNING("enabling link %u failed: %d\n", |
| pipe_ctx->stream->link->link_index, |
| status); |
| |
| /* Abort stream enable *unless* the failure was due to |
| * DP link training - some DP monitors will recover and |
| * show the stream anyway. But MST displays can't proceed |
| * without link training. |
| */ |
| if (status != DC_FAIL_DP_LINK_TRAINING || |
| pipe_ctx->stream->signal == SIGNAL_TYPE_DISPLAY_PORT_MST) { |
| if (false == stream->link->link_status.link_active) |
| disable_link(stream->link, &pipe_ctx->link_res, |
| pipe_ctx->stream->signal); |
| BREAK_TO_DEBUGGER(); |
| return; |
| } |
| } |
| |
| /* turn off otg test pattern if enable */ |
| if (pipe_ctx->stream_res.tg->funcs->set_test_pattern) |
| pipe_ctx->stream_res.tg->funcs->set_test_pattern(pipe_ctx->stream_res.tg, |
| CONTROLLER_DP_TEST_PATTERN_VIDEOMODE, |
| COLOR_DEPTH_UNDEFINED); |
| |
| /* This second call is needed to reconfigure the DIG |
| * as a workaround for the incorrect value being applied |
| * from transmitter control. |
| */ |
| if (!(dc_is_virtual_signal(pipe_ctx->stream->signal) || |
| dp_is_128b_132b_signal(pipe_ctx))) { |
| struct stream_encoder *stream_enc = pipe_ctx->stream_res.stream_enc; |
| |
| if (link_enc) |
| link_enc->funcs->setup( |
| link_enc, |
| pipe_ctx->stream->signal); |
| |
| if (stream_enc && stream_enc->funcs->dig_stream_enable) |
| stream_enc->funcs->dig_stream_enable( |
| stream_enc, |
| pipe_ctx->stream->signal, 1); |
| |
| } |
| |
| dc->hwss.enable_stream(pipe_ctx); |
| |
| /* Set DPS PPS SDP (AKA "info frames") */ |
| if (pipe_ctx->stream->timing.flags.DSC) { |
| if (dc_is_dp_signal(pipe_ctx->stream->signal) || |
| dc_is_virtual_signal(pipe_ctx->stream->signal)) { |
| dp_set_dsc_on_rx(pipe_ctx, true); |
| link_set_dsc_pps_packet(pipe_ctx, true, true); |
| } |
| } |
| |
| if (pipe_ctx->stream->link->ep_type == DISPLAY_ENDPOINT_USB4_DPIA) |
| allocate_usb4_bandwidth(pipe_ctx->stream); |
| |
| if (pipe_ctx->stream->signal == SIGNAL_TYPE_DISPLAY_PORT_MST) |
| allocate_mst_payload(pipe_ctx); |
| else if (pipe_ctx->stream->signal == SIGNAL_TYPE_DISPLAY_PORT && |
| dp_is_128b_132b_signal(pipe_ctx)) |
| update_sst_payload(pipe_ctx, true); |
| |
| dc->hwss.unblank_stream(pipe_ctx, |
| &pipe_ctx->stream->link->cur_link_settings); |
| |
| if (stream->sink_patches.delay_ignore_msa > 0) |
| msleep(stream->sink_patches.delay_ignore_msa); |
| |
| if (dc_is_dp_signal(pipe_ctx->stream->signal)) |
| enable_stream_features(pipe_ctx); |
| update_psp_stream_config(pipe_ctx, false); |
| |
| dc->hwss.enable_audio_stream(pipe_ctx); |
| |
| if (dc_is_hdmi_signal(pipe_ctx->stream->signal)) { |
| set_avmute(pipe_ctx, false); |
| } |
| } |