| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2020 Intel Corporation. |
| * |
| * Limitations: |
| * - The hardware supports fixed period & configures only 2-wire mode. |
| * - Supports normal polarity. Does not support changing polarity. |
| * - When PWM is disabled, output of PWM will become 0(inactive). It doesn't |
| * keep track of running period. |
| * - When duty cycle is changed, PWM output may be a mix of previous setting |
| * and new setting for the first period. From second period, the output is |
| * based on new setting. |
| * - It is a dedicated PWM fan controller. There are no other consumers for |
| * this PWM controller. |
| */ |
| #include <linux/bitfield.h> |
| #include <linux/clk.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/pwm.h> |
| #include <linux/regmap.h> |
| #include <linux/reset.h> |
| |
| #define LGM_PWM_FAN_CON0 0x0 |
| #define LGM_PWM_FAN_EN_EN BIT(0) |
| #define LGM_PWM_FAN_EN_DIS 0x0 |
| #define LGM_PWM_FAN_EN_MSK BIT(0) |
| #define LGM_PWM_FAN_MODE_2WIRE 0x0 |
| #define LGM_PWM_FAN_MODE_MSK BIT(1) |
| #define LGM_PWM_FAN_DC_MSK GENMASK(23, 16) |
| |
| #define LGM_PWM_FAN_CON1 0x4 |
| #define LGM_PWM_FAN_MAX_RPM_MSK GENMASK(15, 0) |
| |
| #define LGM_PWM_MAX_RPM (BIT(16) - 1) |
| #define LGM_PWM_DEFAULT_RPM 4000 |
| #define LGM_PWM_MAX_DUTY_CYCLE (BIT(8) - 1) |
| |
| #define LGM_PWM_DC_BITS 8 |
| |
| #define LGM_PWM_PERIOD_2WIRE_NS (40 * NSEC_PER_MSEC) |
| |
| struct lgm_pwm_chip { |
| struct regmap *regmap; |
| u32 period; |
| }; |
| |
| static inline struct lgm_pwm_chip *to_lgm_pwm_chip(struct pwm_chip *chip) |
| { |
| return pwmchip_get_drvdata(chip); |
| } |
| |
| static int lgm_pwm_enable(struct pwm_chip *chip, bool enable) |
| { |
| struct lgm_pwm_chip *pc = to_lgm_pwm_chip(chip); |
| struct regmap *regmap = pc->regmap; |
| |
| return regmap_update_bits(regmap, LGM_PWM_FAN_CON0, LGM_PWM_FAN_EN_MSK, |
| enable ? LGM_PWM_FAN_EN_EN : LGM_PWM_FAN_EN_DIS); |
| } |
| |
| static int lgm_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, |
| const struct pwm_state *state) |
| { |
| struct lgm_pwm_chip *pc = to_lgm_pwm_chip(chip); |
| u32 duty_cycle, val; |
| int ret; |
| |
| /* The hardware only supports normal polarity and fixed period. */ |
| if (state->polarity != PWM_POLARITY_NORMAL || state->period < pc->period) |
| return -EINVAL; |
| |
| if (!state->enabled) |
| return lgm_pwm_enable(chip, 0); |
| |
| duty_cycle = min_t(u64, state->duty_cycle, pc->period); |
| val = duty_cycle * LGM_PWM_MAX_DUTY_CYCLE / pc->period; |
| |
| ret = regmap_update_bits(pc->regmap, LGM_PWM_FAN_CON0, LGM_PWM_FAN_DC_MSK, |
| FIELD_PREP(LGM_PWM_FAN_DC_MSK, val)); |
| if (ret) |
| return ret; |
| |
| return lgm_pwm_enable(chip, 1); |
| } |
| |
| static int lgm_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm, |
| struct pwm_state *state) |
| { |
| struct lgm_pwm_chip *pc = to_lgm_pwm_chip(chip); |
| u32 duty, val; |
| |
| state->enabled = regmap_test_bits(pc->regmap, LGM_PWM_FAN_CON0, |
| LGM_PWM_FAN_EN_EN); |
| state->polarity = PWM_POLARITY_NORMAL; |
| state->period = pc->period; /* fixed period */ |
| |
| regmap_read(pc->regmap, LGM_PWM_FAN_CON0, &val); |
| duty = FIELD_GET(LGM_PWM_FAN_DC_MSK, val); |
| state->duty_cycle = DIV_ROUND_UP(duty * pc->period, LGM_PWM_MAX_DUTY_CYCLE); |
| |
| return 0; |
| } |
| |
| static const struct pwm_ops lgm_pwm_ops = { |
| .get_state = lgm_pwm_get_state, |
| .apply = lgm_pwm_apply, |
| }; |
| |
| static void lgm_pwm_init(struct lgm_pwm_chip *pc) |
| { |
| struct regmap *regmap = pc->regmap; |
| u32 con0_val; |
| |
| con0_val = FIELD_PREP(LGM_PWM_FAN_MODE_MSK, LGM_PWM_FAN_MODE_2WIRE); |
| pc->period = LGM_PWM_PERIOD_2WIRE_NS; |
| regmap_update_bits(regmap, LGM_PWM_FAN_CON1, LGM_PWM_FAN_MAX_RPM_MSK, |
| LGM_PWM_DEFAULT_RPM); |
| regmap_update_bits(regmap, LGM_PWM_FAN_CON0, LGM_PWM_FAN_MODE_MSK, |
| con0_val); |
| } |
| |
| static const struct regmap_config lgm_pwm_regmap_config = { |
| .reg_bits = 32, |
| .reg_stride = 4, |
| .val_bits = 32, |
| }; |
| |
| static void lgm_clk_release(void *data) |
| { |
| struct clk *clk = data; |
| |
| clk_disable_unprepare(clk); |
| } |
| |
| static int lgm_clk_enable(struct device *dev, struct clk *clk) |
| { |
| int ret; |
| |
| ret = clk_prepare_enable(clk); |
| if (ret) |
| return ret; |
| |
| return devm_add_action_or_reset(dev, lgm_clk_release, clk); |
| } |
| |
| static void lgm_reset_control_release(void *data) |
| { |
| struct reset_control *rst = data; |
| |
| reset_control_assert(rst); |
| } |
| |
| static int lgm_reset_control_deassert(struct device *dev, struct reset_control *rst) |
| { |
| int ret; |
| |
| ret = reset_control_deassert(rst); |
| if (ret) |
| return ret; |
| |
| return devm_add_action_or_reset(dev, lgm_reset_control_release, rst); |
| } |
| |
| static int lgm_pwm_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct reset_control *rst; |
| struct pwm_chip *chip; |
| struct lgm_pwm_chip *pc; |
| void __iomem *io_base; |
| struct clk *clk; |
| int ret; |
| |
| chip = devm_pwmchip_alloc(dev, 1, sizeof(*pc)); |
| if (IS_ERR(chip)) |
| return PTR_ERR(chip); |
| pc = to_lgm_pwm_chip(chip); |
| |
| io_base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(io_base)) |
| return PTR_ERR(io_base); |
| |
| pc->regmap = devm_regmap_init_mmio(dev, io_base, &lgm_pwm_regmap_config); |
| if (IS_ERR(pc->regmap)) |
| return dev_err_probe(dev, PTR_ERR(pc->regmap), |
| "failed to init register map\n"); |
| |
| clk = devm_clk_get(dev, NULL); |
| if (IS_ERR(clk)) |
| return dev_err_probe(dev, PTR_ERR(clk), "failed to get clock\n"); |
| |
| ret = lgm_clk_enable(dev, clk); |
| if (ret) |
| return dev_err_probe(dev, ret, "failed to enable clock\n"); |
| |
| rst = devm_reset_control_get_exclusive(dev, NULL); |
| if (IS_ERR(rst)) |
| return dev_err_probe(dev, PTR_ERR(rst), |
| "failed to get reset control\n"); |
| |
| ret = lgm_reset_control_deassert(dev, rst); |
| if (ret) |
| return dev_err_probe(dev, ret, "cannot deassert reset control\n"); |
| |
| chip->ops = &lgm_pwm_ops; |
| |
| lgm_pwm_init(pc); |
| |
| ret = devm_pwmchip_add(dev, chip); |
| if (ret < 0) |
| return dev_err_probe(dev, ret, "failed to add PWM chip\n"); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id lgm_pwm_of_match[] = { |
| { .compatible = "intel,lgm-pwm" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, lgm_pwm_of_match); |
| |
| static struct platform_driver lgm_pwm_driver = { |
| .driver = { |
| .name = "intel-pwm", |
| .of_match_table = lgm_pwm_of_match, |
| }, |
| .probe = lgm_pwm_probe, |
| }; |
| module_platform_driver(lgm_pwm_driver); |
| |
| MODULE_LICENSE("GPL v2"); |