| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Author: |
| * Chuanhong Guo <gch981213@gmail.com> - the main driver logic |
| * Martin Kurbanov <mmkurbanov@sberdevices.ru> - OOB layout |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/kernel.h> |
| #include <linux/mtd/spinand.h> |
| |
| /* ESMT uses GigaDevice 0xc8 JECDEC ID on some SPI NANDs */ |
| #define SPINAND_MFR_ESMT_C8 0xc8 |
| |
| static SPINAND_OP_VARIANTS(read_cache_variants, |
| SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0), |
| SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0), |
| SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0), |
| SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0)); |
| |
| static SPINAND_OP_VARIANTS(write_cache_variants, |
| SPINAND_PROG_LOAD_X4(true, 0, NULL, 0), |
| SPINAND_PROG_LOAD(true, 0, NULL, 0)); |
| |
| static SPINAND_OP_VARIANTS(update_cache_variants, |
| SPINAND_PROG_LOAD_X4(false, 0, NULL, 0), |
| SPINAND_PROG_LOAD(false, 0, NULL, 0)); |
| |
| /* |
| * OOB spare area map (64 bytes) |
| * |
| * Bad Block Markers |
| * filled by HW and kernel Reserved |
| * | +-----------------------+-----------------------+ |
| * | | | | |
| * | | OOB free data Area |non ECC protected | |
| * | +-------------|-----+-----------------|-----+-----------------|-----+ |
| * | | | | | | | | |
| * +-|---|----------+--|-----|--------------+--|-----|--------------+--|-----|--------------+ |
| * | | | section0 | | | section1 | | | section2 | | | section3 | |
| * +-v-+-v-+---+----+--v--+--v--+-----+-----+--v--+--v--+-----+-----+--v--+--v--+-----+-----+ |
| * | | | | | | | | | | | | | | | | | |
| * |0:1|2:3|4:7|8:15|16:17|18:19|20:23|24:31|32:33|34:35|36:39|40:47|48:49|50:51|52:55|56:63| |
| * | | | | | | | | | | | | | | | | | |
| * +---+---+-^-+--^-+-----+-----+--^--+--^--+-----+-----+--^--+--^--+-----+-----+--^--+--^--+ |
| * | | | | | | | | |
| * | +----------------|-----+-----------------|-----+-----------------|-----+ |
| * | ECC Area|(Main + Spare) - filled|by ESMT NAND HW | |
| * | | | | |
| * +---------------------+-----------------------+-----------------------+ |
| * OOB ECC protected Area - not used due to |
| * partial programming from some filesystems |
| * (like JFFS2 with cleanmarkers) |
| */ |
| |
| #define ESMT_OOB_SECTION_COUNT 4 |
| #define ESMT_OOB_SECTION_SIZE(nand) \ |
| (nanddev_per_page_oobsize(nand) / ESMT_OOB_SECTION_COUNT) |
| #define ESMT_OOB_FREE_SIZE(nand) \ |
| (ESMT_OOB_SECTION_SIZE(nand) / 2) |
| #define ESMT_OOB_ECC_SIZE(nand) \ |
| (ESMT_OOB_SECTION_SIZE(nand) - ESMT_OOB_FREE_SIZE(nand)) |
| #define ESMT_OOB_BBM_SIZE 2 |
| |
| static int f50l1g41lb_ooblayout_ecc(struct mtd_info *mtd, int section, |
| struct mtd_oob_region *region) |
| { |
| struct nand_device *nand = mtd_to_nanddev(mtd); |
| |
| if (section >= ESMT_OOB_SECTION_COUNT) |
| return -ERANGE; |
| |
| region->offset = section * ESMT_OOB_SECTION_SIZE(nand) + |
| ESMT_OOB_FREE_SIZE(nand); |
| region->length = ESMT_OOB_ECC_SIZE(nand); |
| |
| return 0; |
| } |
| |
| static int f50l1g41lb_ooblayout_free(struct mtd_info *mtd, int section, |
| struct mtd_oob_region *region) |
| { |
| struct nand_device *nand = mtd_to_nanddev(mtd); |
| |
| if (section >= ESMT_OOB_SECTION_COUNT) |
| return -ERANGE; |
| |
| /* |
| * Reserve space for bad blocks markers (section0) and |
| * reserved bytes (sections 1-3) |
| */ |
| region->offset = section * ESMT_OOB_SECTION_SIZE(nand) + 2; |
| |
| /* Use only 2 non-protected ECC bytes per each OOB section */ |
| region->length = 2; |
| |
| return 0; |
| } |
| |
| static const struct mtd_ooblayout_ops f50l1g41lb_ooblayout = { |
| .ecc = f50l1g41lb_ooblayout_ecc, |
| .free = f50l1g41lb_ooblayout_free, |
| }; |
| |
| static const struct spinand_info esmt_c8_spinand_table[] = { |
| SPINAND_INFO("F50L1G41LB", |
| SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x01, 0x7f, |
| 0x7f, 0x7f), |
| NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1), |
| NAND_ECCREQ(1, 512), |
| SPINAND_INFO_OP_VARIANTS(&read_cache_variants, |
| &write_cache_variants, |
| &update_cache_variants), |
| 0, |
| SPINAND_ECCINFO(&f50l1g41lb_ooblayout, NULL)), |
| SPINAND_INFO("F50D1G41LB", |
| SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x11, 0x7f, |
| 0x7f, 0x7f), |
| NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1), |
| NAND_ECCREQ(1, 512), |
| SPINAND_INFO_OP_VARIANTS(&read_cache_variants, |
| &write_cache_variants, |
| &update_cache_variants), |
| 0, |
| SPINAND_ECCINFO(&f50l1g41lb_ooblayout, NULL)), |
| SPINAND_INFO("F50D2G41KA", |
| SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0x51, 0x7f, |
| 0x7f, 0x7f), |
| NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 1, 1, 1), |
| NAND_ECCREQ(8, 512), |
| SPINAND_INFO_OP_VARIANTS(&read_cache_variants, |
| &write_cache_variants, |
| &update_cache_variants), |
| 0, |
| SPINAND_ECCINFO(&f50l1g41lb_ooblayout, NULL)), |
| }; |
| |
| static const struct spinand_manufacturer_ops esmt_spinand_manuf_ops = { |
| }; |
| |
| const struct spinand_manufacturer esmt_c8_spinand_manufacturer = { |
| .id = SPINAND_MFR_ESMT_C8, |
| .name = "ESMT", |
| .chips = esmt_c8_spinand_table, |
| .nchips = ARRAY_SIZE(esmt_c8_spinand_table), |
| .ops = &esmt_spinand_manuf_ops, |
| }; |