drivers/staging/bcm/Ioctl.h - linux - Git at Google

 #ifndef _IOCTL_H_
 #define _IOCTL_H_

 typedef struct rdmbuffer
 {
 	ULONG	Register;
 	ULONG	Length;
 }__attribute__((packed)) RDM_BUFFER, *PRDM_BUFFER;


 typedef struct wrmbuffer
 {
 	ULONG	Register;
 	ULONG	Length;
 	UCHAR	Data[4];
 }__attribute__((packed)) WRM_BUFFER, *PWRM_BUFFER;


 typedef struct ioctlbuffer
 {
 	void __user *InputBuffer;
 	ULONG	InputLength;
 	void __user *OutputBuffer;
 	ULONG	OutputLength;
 }__attribute__((packed)) IOCTL_BUFFER, *PIOCTL_BUFFER;

 typedef struct stGPIOInfo
 {
 	UINT  uiGpioNumber ; /* valid numbers 0-15 */
 	UINT uiGpioValue; /* 1 set ; 0 not  set */
 }__attribute__((packed))GPIO_INFO,*PGPIO_INFO;
 typedef struct stUserThreadReq
 {
 	//0->Inactivate LED thread.
 	//1->Activate the LED thread
 	UINT ThreadState;
 }__attribute__((packed))USER_THREAD_REQ,*PUSER_THREAD_REQ;
 #define LED_THREAD_ACTIVATION_REQ  1


 ////********** ioctl codes ***********////

 #define BCM_IOCTL 				'k'

 //1.Control code for CONTROL MESSAGES

 #define IOCTL_SEND_CONTROL_MESSAGE 			_IOW(BCM_IOCTL,	0x801,int)

 //2.Control code to write a particular value to a particular register
 #define IOCTL_BCM_REGISTER_WRITE            _IOW(BCM_IOCTL, 0x802, int) //

 //3.
 #define IOCTL_BCM_REGISTER_READ             _IOR(BCM_IOCTL, 0x803, int) //

 //4.Control code to write x number of bytes to common memory
 //starting from address y
 #define IOCTL_BCM_COMMON_MEMORY_WRITE  	    _IOW(BCM_IOCTL, 0x804, int)//

 //5.Control code to write x number of bytes to common memory
 //starting from address y
 #define IOCTL_BCM_COMMON_MEMORY_READ 	    _IOR(BCM_IOCTL, 0x805, int)//

 //6.Control code for CONTROL MESSAGES
 #define IOCTL_GET_CONTROL_MESSAGE 			_IOR(BCM_IOCTL,	0x806, int)//

 //7.Control code for FIRMWARE DOWNLOAD
 #define IOCTL_BCM_FIRMWARE_DOWNLOAD 		_IOW(BCM_IOCTL, 0x807, int)//

 #define IOCTL_BCM_SET_SEND_VCID 	        _IOW(BCM_IOCTL,	0x808, int)

 //9.Control code for TRANSFER MODE SWITCHING
 #define IOCTL_BCM_SWITCH_TRANSFER_MODE 		_IOW(BCM_IOCTL, 0x809, int)
 //10.Control code for LINK UP
 #define IOCTL_LINK_REQ 						_IOW(BCM_IOCTL, 0x80A, int)

 //11.Control code for RSSI Level Request
 #define IOCTL_RSSI_LEVEL_REQ				_IOW(BCM_IOCTL, 0x80B, int)
 //12.Control code for IDLE MODE CONTROL
 #define IOCTL_IDLE_REQ						_IOW(BCM_IOCTL, 0x80C, int)
 //13.Control code for SS/BS info
 #define IOCTL_SS_INFO_REQ					_IOW(BCM_IOCTL, 0x80D, int)

 #define IOCTL_GET_STATISTICS_POINTER		_IOW(BCM_IOCTL, 0x80E, int)

 #define IOCTL_CM_REQUEST    				_IOW(BCM_IOCTL, 0x80F, int)

 #define IOCTL_INIT_PARAM_REQ 				_IOW(BCM_IOCTL, 0x810, int)

 #define IOCTL_MAC_ADDR_REQ				_IOW(BCM_IOCTL, 0x811, int)

 #define IOCTL_MAC_ADDR_RESP				_IOWR(BCM_IOCTL, 0x812, int)

 #define IOCTL_CLASSIFICATION_RULE	  	_IOW(BCM_IOCTL, 0x813, char)

 #define IOCTL_CLOSE_NOTIFICATION		_IO(BCM_IOCTL, 0x814)

 #define IOCTL_LINK_UP					_IO(BCM_IOCTL, 0x815)

 #define IOCTL_LINK_DOWN					_IO(BCM_IOCTL, 0x816, IOCTL_BUFFER)

 #define IOCTL_CHIP_RESET                _IO(BCM_IOCTL, 0x816)

 #define IOCTL_CINR_LEVEL_REQ			_IOW(BCM_IOCTL, 0x817, char)

 #define IOCTL_WTM_CONTROL_REQ			_IOW(BCM_IOCTL, 0x817,char)

 #define IOCTL_BE_BUCKET_SIZE			_IOW(BCM_IOCTL, 0x818, unsigned long)

 #define IOCTL_RTPS_BUCKET_SIZE			_IOW(BCM_IOCTL, 0x819, unsigned long)

 #define IOCTL_QOS_THRESHOLD				_IOW(BCM_IOCTL, 0x820, unsigned long)

 #define IOCTL_DUMP_PACKET_INFO				_IO(BCM_IOCTL, 0x821)

 #define IOCTL_GET_PACK_INFO					_IOR(BCM_IOCTL, 0x823, int)

 #define IOCTL_BCM_GET_DRIVER_VERSION		_IOR(BCM_IOCTL, 0x829, int)

 #define IOCTL_BCM_GET_CURRENT_STATUS 		_IOW(BCM_IOCTL, 0x828, int)

 #define IOCTL_BCM_GPIO_SET_REQUEST	  		_IOW(BCM_IOCTL, 0x82A, int)

 #define IOCTL_BCM_GPIO_STATUS_REQUEST 		_IOW(BCM_IOCTL, 0x82b, int)

 #define IOCTL_BCM_GET_DSX_INDICATION 		_IOR(BCM_IOCTL, 0x854, int)

 #define IOCTL_BCM_BUFFER_DOWNLOAD_START 	_IOW(BCM_IOCTL, 0x855, int)

 #define IOCTL_BCM_BUFFER_DOWNLOAD 			_IOW(BCM_IOCTL, 0x856, int)

 #define IOCTL_BCM_BUFFER_DOWNLOAD_STOP 		_IOW(BCM_IOCTL, 0x857, int)

 #define IOCTL_BCM_REGISTER_WRITE_PRIVATE 	_IOW(BCM_IOCTL, 0x826, char)

 #define IOCTL_BCM_REGISTER_READ_PRIVATE		_IOW(BCM_IOCTL, 0x827, char)

 #define IOCTL_BCM_SET_DEBUG                 _IOW(BCM_IOCTL, 0x824, IOCTL_BUFFER)

 #define IOCTL_BCM_EEPROM_REGISTER_WRITE  	_IOW(BCM_IOCTL, 0x858, int)

 #define IOCTL_BCM_EEPROM_REGISTER_READ     	_IOR(BCM_IOCTL, 0x859, int)

 #define IOCTL_BCM_WAKE_UP_DEVICE_FROM_IDLE	_IOR(BCM_IOCTL, 0x860, int)

 #define IOCTL_BCM_SET_MAC_TRACING     		_IOW(BCM_IOCTL, 0x82c, int)

 #define IOCTL_BCM_GET_HOST_MIBS 		  	_IOW(BCM_IOCTL, 0x853, int)

 #define IOCTL_BCM_NVM_READ 					_IOR(BCM_IOCTL, 0x861, int)

 #define IOCTL_BCM_NVM_WRITE					_IOW(BCM_IOCTL, 0x862, int)

 #define IOCTL_BCM_GET_NVM_SIZE				_IOR(BCM_IOCTL, 0x863, int)

 #define IOCTL_BCM_CAL_INIT					_IOR(BCM_IOCTL, 0x864, int)

 #define IOCTL_BCM_BULK_WRM 					_IOW(BCM_IOCTL, 0x90B, int)

 #define IOCTL_BCM_FLASH2X_SECTION_READ 		_IOR(BCM_IOCTL, 0x865, int)

 #define IOCTL_BCM_FLASH2X_SECTION_WRITE		_IOW(BCM_IOCTL, 0x866, int)

 #define IOCTL_BCM_GET_FLASH2X_SECTION_BITMAP _IOR(BCM_IOCTL,0x867, int)

 #define IOCTL_BCM_SET_ACTIVE_SECTION 		_IOW(BCM_IOCTL,0x868, int)

 #define	IOCTL_BCM_IDENTIFY_ACTIVE_SECTION 	_IO(BCM_IOCTL,0x869)

 #define IOCTL_BCM_COPY_SECTION 				_IOW(BCM_IOCTL, 0x870,int)

 #define	IOCTL_BCM_GET_FLASH_CS_INFO 		_IOR(BCM_IOCTL, 0x871, int)

 #define IOCTL_BCM_SELECT_DSD 				_IOW(BCM_IOCTL, 0x872, int)

 #define IOCTL_BCM_NVM_RAW_READ  			_IOR(BCM_IOCTL, 0x875, int)

 #define IOCTL_BCM_CNTRLMSG_MASK  			_IOW(BCM_IOCTL, 0x874, int)

 #define IOCTL_BCM_GET_DEVICE_DRIVER_INFO  _IOR(BCM_IOCTL, 0x877, int)

 #define IOCTL_BCM_TIME_SINCE_NET_ENTRY  _IOR(BCM_IOCTL, 0x876, int)

 #define BCM_LED_THREAD_STATE_CHANGE_REQ	  _IOW(BCM_IOCTL, 0x878, int)

 #define IOCTL_BCM_GPIO_MULTI_REQUEST		_IOW(BCM_IOCTL, 0x82D, IOCTL_BUFFER)
 #define IOCTL_BCM_GPIO_MODE_REQUEST			_IOW(BCM_IOCTL, 0x82E, IOCTL_BUFFER)


 typedef enum _BCM_INTERFACE_TYPE
 {
         BCM_MII,
         BCM_CARDBUS,
         BCM_USB,
         BCM_SDIO,
         BCM_PCMCIA
 }BCM_INTERFACE_TYPE;

 typedef struct _DEVICE_DRIVER_INFO
 {
 	NVM_TYPE 			u32NVMType;
 	UINT 				MaxRDMBufferSize;
 	BCM_INTERFACE_TYPE 	u32InterfaceType;
 	UINT 				u32DSDStartOffset;
 	UINT				u32RxAlignmentCorrection;
 	UINT 				u32Reserved[10];
 } DEVICE_DRIVER_INFO;

 typedef  struct _NVM_READWRITE
 {

 	void __user *pBuffer;
 // Data to be written from|read to. Memory should be allocated by the caller.

 	uint32_t  uiOffset;
 // offset at which data should be written to or read from.

 	uint32_t  uiNumBytes;
 // No. of bytes to be written or read.

 	bool  bVerify;
 // Applicable only for write. If set verification of written data will be done.

 } NVM_READWRITE,*PNVM_READWRITE;
 typedef struct bulkwrmbuffer
 {
 	ULONG	Register;
 	ULONG	SwapEndian;
 	ULONG	Values[1];

 }BULKWRM_BUFFER,*PBULKWRM_BUFFER;


 /***********Structure used for FlashMap2.x *******************************/

 /*
 *	These are Sction present inside the Flash.
 *	There is sectional RD/WR for flash Map 2.x.
 *	hence these section will be used in read/write API.
 */

 typedef enum _FLASH2X_SECTION_VAL
 {
 	NO_SECTION_VAL = 0, //no section is choosen when absolute offset is given for RD/WR
 	ISO_IMAGE1,
 	ISO_IMAGE2,
 	DSD0,
 	DSD1,
 	DSD2,
 	VSA0,
 	VSA1,
 	VSA2,
 	SCSI,
 	CONTROL_SECTION,
 	ISO_IMAGE1_PART2,
 	ISO_IMAGE1_PART3,
 	ISO_IMAGE2_PART2,
 	ISO_IMAGE2_PART3,
 	TOTAL_SECTIONS
 }FLASH2X_SECTION_VAL;

 /*
 *	Structure used for READ/WRITE Flash  Map2.x
 */
 typedef struct _FLASH2X_READWRITE
 {

 	FLASH2X_SECTION_VAL Section; //which section has to be read/written
 	B_UINT32 offset;		//Offset within Section.
 	B_UINT32 numOfBytes;	//NOB from the offset
 	B_UINT32  bVerify;
 	void __user *pDataBuff;	//Buffer for reading/writing

 }FLASH2X_READWRITE, *PFLASH2X_READWRITE;
 /*
 *	This structure is used for coping one section to other.
 *	there are two ways to copy one section to other.
 *	it NOB =0, complete section will be copied on to other.
 *	if NOB !=0, only NOB will be copied from the given offset.
 */

 typedef struct _FLASH2X_COPY_SECTION
 {
 	//Src Section from which Data has to be copied to DstSection
 	FLASH2X_SECTION_VAL SrcSection;

 	//Destination Section from where Data has to be coppied.
 	FLASH2X_SECTION_VAL DstSection;

 	//Offset within Section. if NOB =0 it will be ignored and data will be coped from offset 0.
 	B_UINT32 offset;

 	//NOB from the offset. if NOB = 0 complete src section will be copied to Destination section.
 	B_UINT32 numOfBytes;
 } FLASH2X_COPY_SECTION, *PFLASH2X_COPY_SECTION;


 typedef enum _SECTION_TYPE
 {
 	ISO = 0,
 	VSA = 1,
 	DSD = 2
 } SECTION_TYPE, *PSECTION_TYPE;

 /*
 *	This section provide the complete bitmap of the Flash.
 *	using this map lib/APP will isssue read/write command.
 	Fields are defined as :
 	Bit [0] = section is present  //1:present, 0: Not present
 *      Bit [1] = section is valid  //1: valid, 0: not valid
 *      Bit [2] = Section is R/W  //0: RW, 1: RO
 *	Bit [3] = Section is Active or not 1 means Active, 0->inactive
 *      Bit [7...3] = Reserved
 */

 typedef struct _FLASH2X_BITMAP
 {
 	UCHAR ISO_IMAGE1;
 	UCHAR ISO_IMAGE2;
 	UCHAR DSD0;
 	UCHAR DSD1;
 	UCHAR DSD2;
 	UCHAR VSA0;
 	UCHAR VSA1;
 	UCHAR VSA2;
 	UCHAR SCSI;
 	UCHAR CONTROL_SECTION;
 	//Reserved for future use
 	UCHAR Reserved0;
 	UCHAR Reserved1;
 	UCHAR Reserved2;
 }FLASH2X_BITMAP, *PFLASH2X_BITMAP;

 //for net entry time check
 typedef struct _ST_TIME_ELAPSED_
 {
 	ULONG64	ul64TimeElapsedSinceNetEntry;
 	UINT32   uiReserved[4]; //By chance if required for future proofing
 }ST_TIME_ELAPSED,*PST_TIME_ELAPSED;

 enum {
   WIMAX_IDX=0, /*To access WiMAX chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE*/
   HOST_IDX,    /*To access Host chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE*/
   MAX_IDX
 };
 typedef struct stGPIOMultiInfo
 {
   UINT uiGPIOCommand; /* 1 for set and 0 for get*/
   UINT uiGPIOMask;    /* set the correspondig bit to 1 to access GPIO*/
   UINT uiGPIOValue;   /* 0 or 1; value to be set when command is 1.*/
 }__attribute__((packed))GPIO_MULTI_INFO , *PGPIO_MULTI_INFO;

 typedef struct stGPIOMultiMode
 {
   UINT uiGPIOMode;    /* 1 for OUT mode, 0 for IN mode*/
   UINT uiGPIOMask;    /* GPIO mask to set mode*/
 }__attribute__((packed))GPIO_MULTI_MODE, *PGPIO_MULTI_MODE;


 #endif
	#ifndef _IOCTL_H_
	#define _IOCTL_H_

	typedef struct rdmbuffer
	{
	ULONG Register;
	ULONG Length;
	}__attribute__((packed)) RDM_BUFFER, *PRDM_BUFFER;


	typedef struct wrmbuffer
	{
	ULONG Register;
	ULONG Length;
	UCHAR Data[4];
	}__attribute__((packed)) WRM_BUFFER, *PWRM_BUFFER;


	typedef struct ioctlbuffer
	{
	void __user *InputBuffer;
	ULONG InputLength;
	void __user *OutputBuffer;
	ULONG OutputLength;
	}__attribute__((packed)) IOCTL_BUFFER, *PIOCTL_BUFFER;

	typedef struct stGPIOInfo
	{
	UINT uiGpioNumber ; /* valid numbers 0-15 */
	UINT uiGpioValue; /* 1 set ; 0 not set */
	}__attribute__((packed))GPIO_INFO,*PGPIO_INFO;
	typedef struct stUserThreadReq
	{
	//0->Inactivate LED thread.
	//1->Activate the LED thread
	UINT ThreadState;
	}__attribute__((packed))USER_THREAD_REQ,*PUSER_THREAD_REQ;
	#define LED_THREAD_ACTIVATION_REQ 1


	////******** ioctl codes *********////

	#define BCM_IOCTL 'k'

	//1.Control code for CONTROL MESSAGES

	#define IOCTL_SEND_CONTROL_MESSAGE _IOW(BCM_IOCTL, 0x801,int)

	//2.Control code to write a particular value to a particular register
	#define IOCTL_BCM_REGISTER_WRITE _IOW(BCM_IOCTL, 0x802, int) //

	//3.
	#define IOCTL_BCM_REGISTER_READ _IOR(BCM_IOCTL, 0x803, int) //

	//4.Control code to write x number of bytes to common memory
	//starting from address y
	#define IOCTL_BCM_COMMON_MEMORY_WRITE _IOW(BCM_IOCTL, 0x804, int)//

	//5.Control code to write x number of bytes to common memory
	//starting from address y
	#define IOCTL_BCM_COMMON_MEMORY_READ _IOR(BCM_IOCTL, 0x805, int)//

	//6.Control code for CONTROL MESSAGES
	#define IOCTL_GET_CONTROL_MESSAGE _IOR(BCM_IOCTL, 0x806, int)//

	//7.Control code for FIRMWARE DOWNLOAD
	#define IOCTL_BCM_FIRMWARE_DOWNLOAD _IOW(BCM_IOCTL, 0x807, int)//

	#define IOCTL_BCM_SET_SEND_VCID _IOW(BCM_IOCTL, 0x808, int)

	//9.Control code for TRANSFER MODE SWITCHING
	#define IOCTL_BCM_SWITCH_TRANSFER_MODE _IOW(BCM_IOCTL, 0x809, int)
	//10.Control code for LINK UP
	#define IOCTL_LINK_REQ _IOW(BCM_IOCTL, 0x80A, int)

	//11.Control code for RSSI Level Request
	#define IOCTL_RSSI_LEVEL_REQ _IOW(BCM_IOCTL, 0x80B, int)
	//12.Control code for IDLE MODE CONTROL
	#define IOCTL_IDLE_REQ _IOW(BCM_IOCTL, 0x80C, int)
	//13.Control code for SS/BS info
	#define IOCTL_SS_INFO_REQ _IOW(BCM_IOCTL, 0x80D, int)

	#define IOCTL_GET_STATISTICS_POINTER _IOW(BCM_IOCTL, 0x80E, int)

	#define IOCTL_CM_REQUEST _IOW(BCM_IOCTL, 0x80F, int)

	#define IOCTL_INIT_PARAM_REQ _IOW(BCM_IOCTL, 0x810, int)

	#define IOCTL_MAC_ADDR_REQ _IOW(BCM_IOCTL, 0x811, int)

	#define IOCTL_MAC_ADDR_RESP _IOWR(BCM_IOCTL, 0x812, int)

	#define IOCTL_CLASSIFICATION_RULE _IOW(BCM_IOCTL, 0x813, char)

	#define IOCTL_CLOSE_NOTIFICATION _IO(BCM_IOCTL, 0x814)

	#define IOCTL_LINK_UP _IO(BCM_IOCTL, 0x815)

	#define IOCTL_LINK_DOWN _IO(BCM_IOCTL, 0x816, IOCTL_BUFFER)

	#define IOCTL_CHIP_RESET _IO(BCM_IOCTL, 0x816)

	#define IOCTL_CINR_LEVEL_REQ _IOW(BCM_IOCTL, 0x817, char)

	#define IOCTL_WTM_CONTROL_REQ _IOW(BCM_IOCTL, 0x817,char)

	#define IOCTL_BE_BUCKET_SIZE _IOW(BCM_IOCTL, 0x818, unsigned long)

	#define IOCTL_RTPS_BUCKET_SIZE _IOW(BCM_IOCTL, 0x819, unsigned long)

	#define IOCTL_QOS_THRESHOLD _IOW(BCM_IOCTL, 0x820, unsigned long)

	#define IOCTL_DUMP_PACKET_INFO _IO(BCM_IOCTL, 0x821)

	#define IOCTL_GET_PACK_INFO _IOR(BCM_IOCTL, 0x823, int)

	#define IOCTL_BCM_GET_DRIVER_VERSION _IOR(BCM_IOCTL, 0x829, int)

	#define IOCTL_BCM_GET_CURRENT_STATUS _IOW(BCM_IOCTL, 0x828, int)

	#define IOCTL_BCM_GPIO_SET_REQUEST _IOW(BCM_IOCTL, 0x82A, int)

	#define IOCTL_BCM_GPIO_STATUS_REQUEST _IOW(BCM_IOCTL, 0x82b, int)

	#define IOCTL_BCM_GET_DSX_INDICATION _IOR(BCM_IOCTL, 0x854, int)

	#define IOCTL_BCM_BUFFER_DOWNLOAD_START _IOW(BCM_IOCTL, 0x855, int)

	#define IOCTL_BCM_BUFFER_DOWNLOAD _IOW(BCM_IOCTL, 0x856, int)

	#define IOCTL_BCM_BUFFER_DOWNLOAD_STOP _IOW(BCM_IOCTL, 0x857, int)

	#define IOCTL_BCM_REGISTER_WRITE_PRIVATE _IOW(BCM_IOCTL, 0x826, char)

	#define IOCTL_BCM_REGISTER_READ_PRIVATE _IOW(BCM_IOCTL, 0x827, char)

	#define IOCTL_BCM_SET_DEBUG _IOW(BCM_IOCTL, 0x824, IOCTL_BUFFER)

	#define IOCTL_BCM_EEPROM_REGISTER_WRITE _IOW(BCM_IOCTL, 0x858, int)

	#define IOCTL_BCM_EEPROM_REGISTER_READ _IOR(BCM_IOCTL, 0x859, int)

	#define IOCTL_BCM_WAKE_UP_DEVICE_FROM_IDLE _IOR(BCM_IOCTL, 0x860, int)

	#define IOCTL_BCM_SET_MAC_TRACING _IOW(BCM_IOCTL, 0x82c, int)

	#define IOCTL_BCM_GET_HOST_MIBS _IOW(BCM_IOCTL, 0x853, int)

	#define IOCTL_BCM_NVM_READ _IOR(BCM_IOCTL, 0x861, int)

	#define IOCTL_BCM_NVM_WRITE _IOW(BCM_IOCTL, 0x862, int)

	#define IOCTL_BCM_GET_NVM_SIZE _IOR(BCM_IOCTL, 0x863, int)

	#define IOCTL_BCM_CAL_INIT _IOR(BCM_IOCTL, 0x864, int)

	#define IOCTL_BCM_BULK_WRM _IOW(BCM_IOCTL, 0x90B, int)

	#define IOCTL_BCM_FLASH2X_SECTION_READ _IOR(BCM_IOCTL, 0x865, int)

	#define IOCTL_BCM_FLASH2X_SECTION_WRITE _IOW(BCM_IOCTL, 0x866, int)

	#define IOCTL_BCM_GET_FLASH2X_SECTION_BITMAP _IOR(BCM_IOCTL,0x867, int)

	#define IOCTL_BCM_SET_ACTIVE_SECTION _IOW(BCM_IOCTL,0x868, int)

	#define IOCTL_BCM_IDENTIFY_ACTIVE_SECTION _IO(BCM_IOCTL,0x869)

	#define IOCTL_BCM_COPY_SECTION _IOW(BCM_IOCTL, 0x870,int)

	#define IOCTL_BCM_GET_FLASH_CS_INFO _IOR(BCM_IOCTL, 0x871, int)

	#define IOCTL_BCM_SELECT_DSD _IOW(BCM_IOCTL, 0x872, int)

	#define IOCTL_BCM_NVM_RAW_READ _IOR(BCM_IOCTL, 0x875, int)

	#define IOCTL_BCM_CNTRLMSG_MASK _IOW(BCM_IOCTL, 0x874, int)

	#define IOCTL_BCM_GET_DEVICE_DRIVER_INFO _IOR(BCM_IOCTL, 0x877, int)

	#define IOCTL_BCM_TIME_SINCE_NET_ENTRY _IOR(BCM_IOCTL, 0x876, int)

	#define BCM_LED_THREAD_STATE_CHANGE_REQ _IOW(BCM_IOCTL, 0x878, int)

	#define IOCTL_BCM_GPIO_MULTI_REQUEST _IOW(BCM_IOCTL, 0x82D, IOCTL_BUFFER)
	#define IOCTL_BCM_GPIO_MODE_REQUEST _IOW(BCM_IOCTL, 0x82E, IOCTL_BUFFER)



	typedef enum _BCM_INTERFACE_TYPE
	{
	BCM_MII,
	BCM_CARDBUS,
	BCM_USB,
	BCM_SDIO,
	BCM_PCMCIA
	}BCM_INTERFACE_TYPE;

	typedef struct _DEVICE_DRIVER_INFO
	{
	NVM_TYPE u32NVMType;
	UINT MaxRDMBufferSize;
	BCM_INTERFACE_TYPE u32InterfaceType;
	UINT u32DSDStartOffset;
	UINT u32RxAlignmentCorrection;
	UINT u32Reserved[10];
	} DEVICE_DRIVER_INFO;

	typedef struct _NVM_READWRITE
	{

	void __user *pBuffer;
	// Data to be written from\|read to. Memory should be allocated by the caller.

	uint32_t uiOffset;
	// offset at which data should be written to or read from.

	uint32_t uiNumBytes;
	// No. of bytes to be written or read.

	bool bVerify;
	// Applicable only for write. If set verification of written data will be done.

	} NVM_READWRITE,*PNVM_READWRITE;
	typedef struct bulkwrmbuffer
	{
	ULONG Register;
	ULONG SwapEndian;
	ULONG Values[1];

	}BULKWRM_BUFFER,*PBULKWRM_BUFFER;


	/*********Structure used for FlashMap2.x *****************************/

	/*
	* These are Sction present inside the Flash.
	* There is sectional RD/WR for flash Map 2.x.
	* hence these section will be used in read/write API.
	*/

	typedef enum _FLASH2X_SECTION_VAL
	{
	NO_SECTION_VAL = 0, //no section is choosen when absolute offset is given for RD/WR
	ISO_IMAGE1,
	ISO_IMAGE2,
	DSD0,
	DSD1,
	DSD2,
	VSA0,
	VSA1,
	VSA2,
	SCSI,
	CONTROL_SECTION,
	ISO_IMAGE1_PART2,
	ISO_IMAGE1_PART3,
	ISO_IMAGE2_PART2,
	ISO_IMAGE2_PART3,
	TOTAL_SECTIONS
	}FLASH2X_SECTION_VAL;

	/*
	* Structure used for READ/WRITE Flash Map2.x
	*/
	typedef struct _FLASH2X_READWRITE
	{

	FLASH2X_SECTION_VAL Section; //which section has to be read/written
	B_UINT32 offset; //Offset within Section.
	B_UINT32 numOfBytes; //NOB from the offset
	B_UINT32 bVerify;
	void __user *pDataBuff; //Buffer for reading/writing

	}FLASH2X_READWRITE, *PFLASH2X_READWRITE;
	/*
	* This structure is used for coping one section to other.
	* there are two ways to copy one section to other.
	* it NOB =0, complete section will be copied on to other.
	* if NOB !=0, only NOB will be copied from the given offset.
	*/

	typedef struct _FLASH2X_COPY_SECTION
	{
	//Src Section from which Data has to be copied to DstSection
	FLASH2X_SECTION_VAL SrcSection;

	//Destination Section from where Data has to be coppied.
	FLASH2X_SECTION_VAL DstSection;

	//Offset within Section. if NOB =0 it will be ignored and data will be coped from offset 0.
	B_UINT32 offset;

	//NOB from the offset. if NOB = 0 complete src section will be copied to Destination section.
	B_UINT32 numOfBytes;
	} FLASH2X_COPY_SECTION, *PFLASH2X_COPY_SECTION;


	typedef enum _SECTION_TYPE
	{
	ISO = 0,
	VSA = 1,
	DSD = 2
	} SECTION_TYPE, *PSECTION_TYPE;

	/*
	* This section provide the complete bitmap of the Flash.
	* using this map lib/APP will isssue read/write command.
	Fields are defined as :
	Bit [0] = section is present //1:present, 0: Not present
	* Bit [1] = section is valid //1: valid, 0: not valid
	* Bit [2] = Section is R/W //0: RW, 1: RO
	* Bit [3] = Section is Active or not 1 means Active, 0->inactive
	* Bit [7...3] = Reserved
	*/

	typedef struct _FLASH2X_BITMAP
	{
	UCHAR ISO_IMAGE1;
	UCHAR ISO_IMAGE2;
	UCHAR DSD0;
	UCHAR DSD1;
	UCHAR DSD2;
	UCHAR VSA0;
	UCHAR VSA1;
	UCHAR VSA2;
	UCHAR SCSI;
	UCHAR CONTROL_SECTION;
	//Reserved for future use
	UCHAR Reserved0;
	UCHAR Reserved1;
	UCHAR Reserved2;
	}FLASH2X_BITMAP, *PFLASH2X_BITMAP;

	//for net entry time check
	typedef struct _ST_TIME_ELAPSED_
	{
	ULONG64 ul64TimeElapsedSinceNetEntry;
	UINT32 uiReserved[4]; //By chance if required for future proofing
	}ST_TIME_ELAPSED,*PST_TIME_ELAPSED;

	enum {
	WIMAX_IDX=0, /To access WiMAX chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE/
	HOST_IDX, /To access Host chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE/
	MAX_IDX
	};
	typedef struct stGPIOMultiInfo
	{
	UINT uiGPIOCommand; /* 1 for set and 0 for get*/
	UINT uiGPIOMask; /* set the correspondig bit to 1 to access GPIO*/
	UINT uiGPIOValue; /* 0 or 1; value to be set when command is 1.*/
	}__attribute__((packed))GPIO_MULTI_INFO , *PGPIO_MULTI_INFO;

	typedef struct stGPIOMultiMode
	{
	UINT uiGPIOMode; /* 1 for OUT mode, 0 for IN mode*/
	UINT uiGPIOMask; /* GPIO mask to set mode*/
	}__attribute__((packed))GPIO_MULTI_MODE, *PGPIO_MULTI_MODE;


	#endif