| # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: "http://devicetree.org/schemas/arm/stm32/st,mlahb.yaml#" |
| $schema: "http://devicetree.org/meta-schemas/core.yaml#" |
| |
| title: STMicroelectronics STM32 ML-AHB interconnect bindings |
| |
| maintainers: |
| - Fabien Dessenne <fabien.dessenne@foss.st.com> |
| - Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> |
| |
| description: | |
| These bindings describe the STM32 SoCs ML-AHB interconnect bus which connects |
| a Cortex-M subsystem with dedicated memories. The MCU SRAM and RETRAM memory |
| parts can be accessed through different addresses (see "RAM aliases" in [1]) |
| using different buses (see [2]): balancing the Cortex-M firmware accesses |
| among those ports allows to tune the system performance. |
| [1]: https://www.st.com/resource/en/reference_manual/dm00327659.pdf |
| [2]: https://wiki.st.com/stm32mpu/wiki/STM32MP15_RAM_mapping |
| |
| allOf: |
| - $ref: /schemas/simple-bus.yaml# |
| |
| properties: |
| compatible: |
| contains: |
| enum: |
| - st,mlahb |
| |
| dma-ranges: |
| description: | |
| Describe memory addresses translation between the local CPU and the |
| remote Cortex-M processor. Each memory region, is declared with |
| 3 parameters: |
| - param 1: device base address (Cortex-M processor address) |
| - param 2: physical base address (local CPU address) |
| - param 3: size of the memory region. |
| maxItems: 3 |
| |
| '#address-cells': |
| const: 1 |
| |
| '#size-cells': |
| const: 1 |
| |
| required: |
| - compatible |
| - '#address-cells' |
| - '#size-cells' |
| - dma-ranges |
| |
| unevaluatedProperties: false |
| |
| examples: |
| - | |
| mlahb: ahb@38000000 { |
| compatible = "st,mlahb", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x10000000 0x40000>; |
| ranges; |
| dma-ranges = <0x00000000 0x38000000 0x10000>, |
| <0x10000000 0x10000000 0x60000>, |
| <0x30000000 0x30000000 0x60000>; |
| |
| m4_rproc: m4@10000000 { |
| reg = <0x10000000 0x40000>; |
| }; |
| }; |
| |
| ... |