| # SPDX-License-Identifier: GPL-2.0 |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/net/can/bosch,m_can.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Bosch MCAN controller Bindings |
| |
| description: Bosch MCAN controller for CAN bus |
| |
| maintainers: |
| - Sriram Dash <sriram.dash@samsung.com> |
| |
| properties: |
| compatible: |
| const: bosch,m_can |
| |
| reg: |
| items: |
| - description: M_CAN registers map |
| - description: message RAM |
| |
| reg-names: |
| items: |
| - const: m_can |
| - const: message_ram |
| |
| interrupts: |
| items: |
| - description: interrupt line0 |
| - description: interrupt line1 |
| minItems: 1 |
| |
| interrupt-names: |
| items: |
| - const: int0 |
| - const: int1 |
| minItems: 1 |
| |
| clocks: |
| items: |
| - description: peripheral clock |
| - description: bus clock |
| |
| clock-names: |
| items: |
| - const: hclk |
| - const: cclk |
| |
| bosch,mram-cfg: |
| description: | |
| Message RAM configuration data. |
| Multiple M_CAN instances can share the same Message RAM |
| and each element(e.g Rx FIFO or Tx Buffer and etc) number |
| in Message RAM is also configurable, so this property is |
| telling driver how the shared or private Message RAM are |
| used by this M_CAN controller. |
| |
| The format should be as follows: |
| <offset sidf_elems xidf_elems rxf0_elems rxf1_elems rxb_elems txe_elems txb_elems> |
| The 'offset' is an address offset of the Message RAM where |
| the following elements start from. This is usually set to |
| 0x0 if you're using a private Message RAM. The remain cells |
| are used to specify how many elements are used for each FIFO/Buffer. |
| |
| M_CAN includes the following elements according to user manual: |
| 11-bit Filter 0-128 elements / 0-128 words |
| 29-bit Filter 0-64 elements / 0-128 words |
| Rx FIFO 0 0-64 elements / 0-1152 words |
| Rx FIFO 1 0-64 elements / 0-1152 words |
| Rx Buffers 0-64 elements / 0-1152 words |
| Tx Event FIFO 0-32 elements / 0-64 words |
| Tx Buffers 0-32 elements / 0-576 words |
| |
| Please refer to 2.4.1 Message RAM Configuration in Bosch |
| M_CAN user manual for details. |
| $ref: /schemas/types.yaml#/definitions/int32-array |
| items: |
| items: |
| - description: The 'offset' is an address offset of the Message RAM where |
| the following elements start from. This is usually set to 0x0 if |
| you're using a private Message RAM. |
| default: 0 |
| - description: 11-bit Filter 0-128 elements / 0-128 words |
| minimum: 0 |
| maximum: 128 |
| - description: 29-bit Filter 0-64 elements / 0-128 words |
| minimum: 0 |
| maximum: 64 |
| - description: Rx FIFO 0 0-64 elements / 0-1152 words |
| minimum: 0 |
| maximum: 64 |
| - description: Rx FIFO 1 0-64 elements / 0-1152 words |
| minimum: 0 |
| maximum: 64 |
| - description: Rx Buffers 0-64 elements / 0-1152 words |
| minimum: 0 |
| maximum: 64 |
| - description: Tx Event FIFO 0-32 elements / 0-64 words |
| minimum: 0 |
| maximum: 32 |
| - description: Tx Buffers 0-32 elements / 0-576 words |
| minimum: 0 |
| maximum: 32 |
| maxItems: 1 |
| |
| power-domains: |
| description: |
| Power domain provider node and an args specifier containing |
| the can device id value. |
| maxItems: 1 |
| |
| can-transceiver: |
| $ref: can-transceiver.yaml# |
| |
| phys: |
| maxItems: 1 |
| |
| required: |
| - compatible |
| - reg |
| - reg-names |
| - interrupts |
| - interrupt-names |
| - clocks |
| - clock-names |
| - bosch,mram-cfg |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/clock/imx6sx-clock.h> |
| can@20e8000 { |
| compatible = "bosch,m_can"; |
| reg = <0x020e8000 0x4000>, <0x02298000 0x4000>; |
| reg-names = "m_can", "message_ram"; |
| interrupts = <0 114 0x04>, <0 114 0x04>; |
| interrupt-names = "int0", "int1"; |
| clocks = <&clks IMX6SX_CLK_CANFD>, |
| <&clks IMX6SX_CLK_CANFD>; |
| clock-names = "hclk", "cclk"; |
| bosch,mram-cfg = <0x0 0 0 32 0 0 0 1>; |
| |
| can-transceiver { |
| max-bitrate = <5000000>; |
| }; |
| }; |
| |
| ... |
