| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * APM X-Gene SoC Hardware Monitoring Driver |
| * |
| * Copyright (c) 2016, Applied Micro Circuits Corporation |
| * Author: Loc Ho <lho@apm.com> |
| * Hoan Tran <hotran@apm.com> |
| * |
| * This driver provides the following features: |
| * - Retrieve CPU total power (uW) |
| * - Retrieve IO total power (uW) |
| * - Retrieve SoC temperature (milli-degree C) and alarm |
| */ |
| #include <linux/acpi.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/io.h> |
| #include <linux/interrupt.h> |
| #include <linux/kfifo.h> |
| #include <linux/mailbox_controller.h> |
| #include <linux/mailbox_client.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| |
| #include <acpi/pcc.h> |
| |
| /* SLIMpro message defines */ |
| #define MSG_TYPE_DBG 0 |
| #define MSG_TYPE_ERR 7 |
| #define MSG_TYPE_PWRMGMT 9 |
| |
| #define MSG_TYPE(v) (((v) & 0xF0000000) >> 28) |
| #define MSG_TYPE_SET(v) (((v) << 28) & 0xF0000000) |
| #define MSG_SUBTYPE(v) (((v) & 0x0F000000) >> 24) |
| #define MSG_SUBTYPE_SET(v) (((v) << 24) & 0x0F000000) |
| |
| #define DBG_SUBTYPE_SENSOR_READ 4 |
| #define SENSOR_RD_MSG 0x04FFE902 |
| #define SENSOR_RD_EN_ADDR(a) ((a) & 0x000FFFFF) |
| #define PMD_PWR_REG 0x20 |
| #define PMD_PWR_MW_REG 0x26 |
| #define SOC_PWR_REG 0x21 |
| #define SOC_PWR_MW_REG 0x27 |
| #define SOC_TEMP_REG 0x10 |
| |
| #define TEMP_NEGATIVE_BIT 8 |
| #define SENSOR_INVALID_DATA BIT(15) |
| |
| #define PWRMGMT_SUBTYPE_TPC 1 |
| #define TPC_ALARM 2 |
| #define TPC_GET_ALARM 3 |
| #define TPC_CMD(v) (((v) & 0x00FF0000) >> 16) |
| #define TPC_CMD_SET(v) (((v) << 16) & 0x00FF0000) |
| #define TPC_EN_MSG(hndl, cmd, type) \ |
| (MSG_TYPE_SET(MSG_TYPE_PWRMGMT) | \ |
| MSG_SUBTYPE_SET(hndl) | TPC_CMD_SET(cmd) | type) |
| |
| /* PCC defines */ |
| #define PCC_SIGNATURE_MASK 0x50424300 |
| #define PCCC_GENERATE_DB_INT BIT(15) |
| #define PCCS_CMD_COMPLETE BIT(0) |
| #define PCCS_SCI_DOORBEL BIT(1) |
| #define PCCS_PLATFORM_NOTIFICATION BIT(3) |
| /* |
| * Arbitrary retries in case the remote processor is slow to respond |
| * to PCC commands |
| */ |
| #define PCC_NUM_RETRIES 500 |
| |
| #define ASYNC_MSG_FIFO_SIZE 16 |
| #define MBOX_OP_TIMEOUTMS 1000 |
| |
| #define WATT_TO_mWATT(x) ((x) * 1000) |
| #define mWATT_TO_uWATT(x) ((x) * 1000) |
| #define CELSIUS_TO_mCELSIUS(x) ((x) * 1000) |
| |
| #define to_xgene_hwmon_dev(cl) \ |
| container_of(cl, struct xgene_hwmon_dev, mbox_client) |
| |
| enum xgene_hwmon_version { |
| XGENE_HWMON_V1 = 0, |
| XGENE_HWMON_V2 = 1, |
| }; |
| |
| struct slimpro_resp_msg { |
| u32 msg; |
| u32 param1; |
| u32 param2; |
| } __packed; |
| |
| struct xgene_hwmon_dev { |
| struct device *dev; |
| struct mbox_chan *mbox_chan; |
| struct pcc_mbox_chan *pcc_chan; |
| struct mbox_client mbox_client; |
| int mbox_idx; |
| |
| spinlock_t kfifo_lock; |
| struct mutex rd_mutex; |
| struct completion rd_complete; |
| int resp_pending; |
| struct slimpro_resp_msg sync_msg; |
| |
| struct work_struct workq; |
| struct kfifo_rec_ptr_1 async_msg_fifo; |
| |
| struct device *hwmon_dev; |
| bool temp_critical_alarm; |
| |
| phys_addr_t comm_base_addr; |
| void *pcc_comm_addr; |
| u64 usecs_lat; |
| }; |
| |
| /* |
| * This function tests and clears a bitmask then returns its old value |
| */ |
| static u16 xgene_word_tst_and_clr(u16 *addr, u16 mask) |
| { |
| u16 ret, val; |
| |
| val = le16_to_cpu(READ_ONCE(*addr)); |
| ret = val & mask; |
| val &= ~mask; |
| WRITE_ONCE(*addr, cpu_to_le16(val)); |
| |
| return ret; |
| } |
| |
| static int xgene_hwmon_pcc_rd(struct xgene_hwmon_dev *ctx, u32 *msg) |
| { |
| struct acpi_pcct_shared_memory *generic_comm_base = ctx->pcc_comm_addr; |
| u32 *ptr = (void *)(generic_comm_base + 1); |
| int rc, i; |
| u16 val; |
| |
| mutex_lock(&ctx->rd_mutex); |
| init_completion(&ctx->rd_complete); |
| ctx->resp_pending = true; |
| |
| /* Write signature for subspace */ |
| WRITE_ONCE(generic_comm_base->signature, |
| cpu_to_le32(PCC_SIGNATURE_MASK | ctx->mbox_idx)); |
| |
| /* Write to the shared command region */ |
| WRITE_ONCE(generic_comm_base->command, |
| cpu_to_le16(MSG_TYPE(msg[0]) | PCCC_GENERATE_DB_INT)); |
| |
| /* Flip CMD COMPLETE bit */ |
| val = le16_to_cpu(READ_ONCE(generic_comm_base->status)); |
| val &= ~PCCS_CMD_COMPLETE; |
| WRITE_ONCE(generic_comm_base->status, cpu_to_le16(val)); |
| |
| /* Copy the message to the PCC comm space */ |
| for (i = 0; i < sizeof(struct slimpro_resp_msg) / 4; i++) |
| WRITE_ONCE(ptr[i], cpu_to_le32(msg[i])); |
| |
| /* Ring the doorbell */ |
| rc = mbox_send_message(ctx->mbox_chan, msg); |
| if (rc < 0) { |
| dev_err(ctx->dev, "Mailbox send error %d\n", rc); |
| goto err; |
| } |
| if (!wait_for_completion_timeout(&ctx->rd_complete, |
| usecs_to_jiffies(ctx->usecs_lat))) { |
| dev_err(ctx->dev, "Mailbox operation timed out\n"); |
| rc = -ETIMEDOUT; |
| goto err; |
| } |
| |
| /* Check for error message */ |
| if (MSG_TYPE(ctx->sync_msg.msg) == MSG_TYPE_ERR) { |
| rc = -EINVAL; |
| goto err; |
| } |
| |
| msg[0] = ctx->sync_msg.msg; |
| msg[1] = ctx->sync_msg.param1; |
| msg[2] = ctx->sync_msg.param2; |
| |
| err: |
| mbox_chan_txdone(ctx->mbox_chan, 0); |
| ctx->resp_pending = false; |
| mutex_unlock(&ctx->rd_mutex); |
| return rc; |
| } |
| |
| static int xgene_hwmon_rd(struct xgene_hwmon_dev *ctx, u32 *msg) |
| { |
| int rc; |
| |
| mutex_lock(&ctx->rd_mutex); |
| init_completion(&ctx->rd_complete); |
| ctx->resp_pending = true; |
| |
| rc = mbox_send_message(ctx->mbox_chan, msg); |
| if (rc < 0) { |
| dev_err(ctx->dev, "Mailbox send error %d\n", rc); |
| goto err; |
| } |
| |
| if (!wait_for_completion_timeout(&ctx->rd_complete, |
| msecs_to_jiffies(MBOX_OP_TIMEOUTMS))) { |
| dev_err(ctx->dev, "Mailbox operation timed out\n"); |
| rc = -ETIMEDOUT; |
| goto err; |
| } |
| |
| /* Check for error message */ |
| if (MSG_TYPE(ctx->sync_msg.msg) == MSG_TYPE_ERR) { |
| rc = -EINVAL; |
| goto err; |
| } |
| |
| msg[0] = ctx->sync_msg.msg; |
| msg[1] = ctx->sync_msg.param1; |
| msg[2] = ctx->sync_msg.param2; |
| |
| err: |
| ctx->resp_pending = false; |
| mutex_unlock(&ctx->rd_mutex); |
| return rc; |
| } |
| |
| static int xgene_hwmon_reg_map_rd(struct xgene_hwmon_dev *ctx, u32 addr, |
| u32 *data) |
| { |
| u32 msg[3]; |
| int rc; |
| |
| msg[0] = SENSOR_RD_MSG; |
| msg[1] = SENSOR_RD_EN_ADDR(addr); |
| msg[2] = 0; |
| |
| if (acpi_disabled) |
| rc = xgene_hwmon_rd(ctx, msg); |
| else |
| rc = xgene_hwmon_pcc_rd(ctx, msg); |
| |
| if (rc < 0) |
| return rc; |
| |
| /* |
| * Check if sensor data is valid. |
| */ |
| if (msg[1] & SENSOR_INVALID_DATA) |
| return -ENODATA; |
| |
| *data = msg[1]; |
| |
| return rc; |
| } |
| |
| static int xgene_hwmon_get_notification_msg(struct xgene_hwmon_dev *ctx, |
| u32 *amsg) |
| { |
| u32 msg[3]; |
| int rc; |
| |
| msg[0] = TPC_EN_MSG(PWRMGMT_SUBTYPE_TPC, TPC_GET_ALARM, 0); |
| msg[1] = 0; |
| msg[2] = 0; |
| |
| rc = xgene_hwmon_pcc_rd(ctx, msg); |
| if (rc < 0) |
| return rc; |
| |
| amsg[0] = msg[0]; |
| amsg[1] = msg[1]; |
| amsg[2] = msg[2]; |
| |
| return rc; |
| } |
| |
| static int xgene_hwmon_get_cpu_pwr(struct xgene_hwmon_dev *ctx, u32 *val) |
| { |
| u32 watt, mwatt; |
| int rc; |
| |
| rc = xgene_hwmon_reg_map_rd(ctx, PMD_PWR_REG, &watt); |
| if (rc < 0) |
| return rc; |
| |
| rc = xgene_hwmon_reg_map_rd(ctx, PMD_PWR_MW_REG, &mwatt); |
| if (rc < 0) |
| return rc; |
| |
| *val = WATT_TO_mWATT(watt) + mwatt; |
| return 0; |
| } |
| |
| static int xgene_hwmon_get_io_pwr(struct xgene_hwmon_dev *ctx, u32 *val) |
| { |
| u32 watt, mwatt; |
| int rc; |
| |
| rc = xgene_hwmon_reg_map_rd(ctx, SOC_PWR_REG, &watt); |
| if (rc < 0) |
| return rc; |
| |
| rc = xgene_hwmon_reg_map_rd(ctx, SOC_PWR_MW_REG, &mwatt); |
| if (rc < 0) |
| return rc; |
| |
| *val = WATT_TO_mWATT(watt) + mwatt; |
| return 0; |
| } |
| |
| static int xgene_hwmon_get_temp(struct xgene_hwmon_dev *ctx, u32 *val) |
| { |
| return xgene_hwmon_reg_map_rd(ctx, SOC_TEMP_REG, val); |
| } |
| |
| /* |
| * Sensor temperature/power functions |
| */ |
| static ssize_t temp1_input_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct xgene_hwmon_dev *ctx = dev_get_drvdata(dev); |
| int rc, temp; |
| u32 val; |
| |
| rc = xgene_hwmon_get_temp(ctx, &val); |
| if (rc < 0) |
| return rc; |
| |
| temp = sign_extend32(val, TEMP_NEGATIVE_BIT); |
| |
| return sysfs_emit(buf, "%d\n", CELSIUS_TO_mCELSIUS(temp)); |
| } |
| |
| static ssize_t temp1_label_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| return sysfs_emit(buf, "SoC Temperature\n"); |
| } |
| |
| static ssize_t temp1_critical_alarm_show(struct device *dev, |
| struct device_attribute *devattr, |
| char *buf) |
| { |
| struct xgene_hwmon_dev *ctx = dev_get_drvdata(dev); |
| |
| return sysfs_emit(buf, "%d\n", ctx->temp_critical_alarm); |
| } |
| |
| static ssize_t power1_label_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| return sysfs_emit(buf, "CPU power\n"); |
| } |
| |
| static ssize_t power2_label_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| return sysfs_emit(buf, "IO power\n"); |
| } |
| |
| static ssize_t power1_input_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct xgene_hwmon_dev *ctx = dev_get_drvdata(dev); |
| u32 val; |
| int rc; |
| |
| rc = xgene_hwmon_get_cpu_pwr(ctx, &val); |
| if (rc < 0) |
| return rc; |
| |
| return sysfs_emit(buf, "%u\n", mWATT_TO_uWATT(val)); |
| } |
| |
| static ssize_t power2_input_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct xgene_hwmon_dev *ctx = dev_get_drvdata(dev); |
| u32 val; |
| int rc; |
| |
| rc = xgene_hwmon_get_io_pwr(ctx, &val); |
| if (rc < 0) |
| return rc; |
| |
| return sysfs_emit(buf, "%u\n", mWATT_TO_uWATT(val)); |
| } |
| |
| static DEVICE_ATTR_RO(temp1_label); |
| static DEVICE_ATTR_RO(temp1_input); |
| static DEVICE_ATTR_RO(temp1_critical_alarm); |
| static DEVICE_ATTR_RO(power1_label); |
| static DEVICE_ATTR_RO(power1_input); |
| static DEVICE_ATTR_RO(power2_label); |
| static DEVICE_ATTR_RO(power2_input); |
| |
| static struct attribute *xgene_hwmon_attrs[] = { |
| &dev_attr_temp1_label.attr, |
| &dev_attr_temp1_input.attr, |
| &dev_attr_temp1_critical_alarm.attr, |
| &dev_attr_power1_label.attr, |
| &dev_attr_power1_input.attr, |
| &dev_attr_power2_label.attr, |
| &dev_attr_power2_input.attr, |
| NULL, |
| }; |
| |
| ATTRIBUTE_GROUPS(xgene_hwmon); |
| |
| static int xgene_hwmon_tpc_alarm(struct xgene_hwmon_dev *ctx, |
| struct slimpro_resp_msg *amsg) |
| { |
| ctx->temp_critical_alarm = !!amsg->param2; |
| sysfs_notify(&ctx->dev->kobj, NULL, "temp1_critical_alarm"); |
| |
| return 0; |
| } |
| |
| static void xgene_hwmon_process_pwrmsg(struct xgene_hwmon_dev *ctx, |
| struct slimpro_resp_msg *amsg) |
| { |
| if ((MSG_SUBTYPE(amsg->msg) == PWRMGMT_SUBTYPE_TPC) && |
| (TPC_CMD(amsg->msg) == TPC_ALARM)) |
| xgene_hwmon_tpc_alarm(ctx, amsg); |
| } |
| |
| /* |
| * This function is called to process async work queue |
| */ |
| static void xgene_hwmon_evt_work(struct work_struct *work) |
| { |
| struct slimpro_resp_msg amsg; |
| struct xgene_hwmon_dev *ctx; |
| int ret; |
| |
| ctx = container_of(work, struct xgene_hwmon_dev, workq); |
| while (kfifo_out_spinlocked(&ctx->async_msg_fifo, &amsg, |
| sizeof(struct slimpro_resp_msg), |
| &ctx->kfifo_lock)) { |
| /* |
| * If PCC, send a consumer command to Platform to get info |
| * If Slimpro Mailbox, get message from specific FIFO |
| */ |
| if (!acpi_disabled) { |
| ret = xgene_hwmon_get_notification_msg(ctx, |
| (u32 *)&amsg); |
| if (ret < 0) |
| continue; |
| } |
| |
| if (MSG_TYPE(amsg.msg) == MSG_TYPE_PWRMGMT) |
| xgene_hwmon_process_pwrmsg(ctx, &amsg); |
| } |
| } |
| |
| static int xgene_hwmon_rx_ready(struct xgene_hwmon_dev *ctx, void *msg) |
| { |
| if (IS_ERR_OR_NULL(ctx->hwmon_dev) && !ctx->resp_pending) { |
| /* Enqueue to the FIFO */ |
| kfifo_in_spinlocked(&ctx->async_msg_fifo, msg, |
| sizeof(struct slimpro_resp_msg), |
| &ctx->kfifo_lock); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * This function is called when the SLIMpro Mailbox received a message |
| */ |
| static void xgene_hwmon_rx_cb(struct mbox_client *cl, void *msg) |
| { |
| struct xgene_hwmon_dev *ctx = to_xgene_hwmon_dev(cl); |
| |
| /* |
| * While the driver registers with the mailbox framework, an interrupt |
| * can be pending before the probe function completes its |
| * initialization. If such condition occurs, just queue up the message |
| * as the driver is not ready for servicing the callback. |
| */ |
| if (xgene_hwmon_rx_ready(ctx, msg) < 0) |
| return; |
| |
| /* |
| * Response message format: |
| * msg[0] is the return code of the operation |
| * msg[1] is the first parameter word |
| * msg[2] is the second parameter word |
| * |
| * As message only supports dword size, just assign it. |
| */ |
| |
| /* Check for sync query */ |
| if (ctx->resp_pending && |
| ((MSG_TYPE(((u32 *)msg)[0]) == MSG_TYPE_ERR) || |
| (MSG_TYPE(((u32 *)msg)[0]) == MSG_TYPE_DBG && |
| MSG_SUBTYPE(((u32 *)msg)[0]) == DBG_SUBTYPE_SENSOR_READ) || |
| (MSG_TYPE(((u32 *)msg)[0]) == MSG_TYPE_PWRMGMT && |
| MSG_SUBTYPE(((u32 *)msg)[0]) == PWRMGMT_SUBTYPE_TPC && |
| TPC_CMD(((u32 *)msg)[0]) == TPC_ALARM))) { |
| ctx->sync_msg.msg = ((u32 *)msg)[0]; |
| ctx->sync_msg.param1 = ((u32 *)msg)[1]; |
| ctx->sync_msg.param2 = ((u32 *)msg)[2]; |
| |
| /* Operation waiting for response */ |
| complete(&ctx->rd_complete); |
| |
| return; |
| } |
| |
| /* Enqueue to the FIFO */ |
| kfifo_in_spinlocked(&ctx->async_msg_fifo, msg, |
| sizeof(struct slimpro_resp_msg), &ctx->kfifo_lock); |
| /* Schedule the bottom handler */ |
| schedule_work(&ctx->workq); |
| } |
| |
| /* |
| * This function is called when the PCC Mailbox received a message |
| */ |
| static void xgene_hwmon_pcc_rx_cb(struct mbox_client *cl, void *msg) |
| { |
| struct xgene_hwmon_dev *ctx = to_xgene_hwmon_dev(cl); |
| struct acpi_pcct_shared_memory *generic_comm_base = ctx->pcc_comm_addr; |
| struct slimpro_resp_msg amsg; |
| |
| /* |
| * While the driver registers with the mailbox framework, an interrupt |
| * can be pending before the probe function completes its |
| * initialization. If such condition occurs, just queue up the message |
| * as the driver is not ready for servicing the callback. |
| */ |
| if (xgene_hwmon_rx_ready(ctx, &amsg) < 0) |
| return; |
| |
| msg = generic_comm_base + 1; |
| /* Check if platform sends interrupt */ |
| if (!xgene_word_tst_and_clr(&generic_comm_base->status, |
| PCCS_SCI_DOORBEL)) |
| return; |
| |
| /* |
| * Response message format: |
| * msg[0] is the return code of the operation |
| * msg[1] is the first parameter word |
| * msg[2] is the second parameter word |
| * |
| * As message only supports dword size, just assign it. |
| */ |
| |
| /* Check for sync query */ |
| if (ctx->resp_pending && |
| ((MSG_TYPE(((u32 *)msg)[0]) == MSG_TYPE_ERR) || |
| (MSG_TYPE(((u32 *)msg)[0]) == MSG_TYPE_DBG && |
| MSG_SUBTYPE(((u32 *)msg)[0]) == DBG_SUBTYPE_SENSOR_READ) || |
| (MSG_TYPE(((u32 *)msg)[0]) == MSG_TYPE_PWRMGMT && |
| MSG_SUBTYPE(((u32 *)msg)[0]) == PWRMGMT_SUBTYPE_TPC && |
| TPC_CMD(((u32 *)msg)[0]) == TPC_ALARM))) { |
| /* Check if platform completes command */ |
| if (xgene_word_tst_and_clr(&generic_comm_base->status, |
| PCCS_CMD_COMPLETE)) { |
| ctx->sync_msg.msg = ((u32 *)msg)[0]; |
| ctx->sync_msg.param1 = ((u32 *)msg)[1]; |
| ctx->sync_msg.param2 = ((u32 *)msg)[2]; |
| |
| /* Operation waiting for response */ |
| complete(&ctx->rd_complete); |
| |
| return; |
| } |
| } |
| |
| /* |
| * Platform notifies interrupt to OSPM. |
| * OPSM schedules a consumer command to get this information |
| * in a workqueue. Platform must wait until OSPM has issued |
| * a consumer command that serves this notification. |
| */ |
| |
| /* Enqueue to the FIFO */ |
| kfifo_in_spinlocked(&ctx->async_msg_fifo, &amsg, |
| sizeof(struct slimpro_resp_msg), &ctx->kfifo_lock); |
| /* Schedule the bottom handler */ |
| schedule_work(&ctx->workq); |
| } |
| |
| static void xgene_hwmon_tx_done(struct mbox_client *cl, void *msg, int ret) |
| { |
| if (ret) { |
| dev_dbg(cl->dev, "TX did not complete: CMD sent:%x, ret:%d\n", |
| *(u16 *)msg, ret); |
| } else { |
| dev_dbg(cl->dev, "TX completed. CMD sent:%x, ret:%d\n", |
| *(u16 *)msg, ret); |
| } |
| } |
| |
| #ifdef CONFIG_ACPI |
| static const struct acpi_device_id xgene_hwmon_acpi_match[] = { |
| {"APMC0D29", XGENE_HWMON_V1}, |
| {"APMC0D8A", XGENE_HWMON_V2}, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(acpi, xgene_hwmon_acpi_match); |
| #endif |
| |
| static int xgene_hwmon_probe(struct platform_device *pdev) |
| { |
| struct xgene_hwmon_dev *ctx; |
| struct mbox_client *cl; |
| int rc; |
| |
| ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) |
| return -ENOMEM; |
| |
| ctx->dev = &pdev->dev; |
| platform_set_drvdata(pdev, ctx); |
| cl = &ctx->mbox_client; |
| |
| spin_lock_init(&ctx->kfifo_lock); |
| mutex_init(&ctx->rd_mutex); |
| |
| rc = kfifo_alloc(&ctx->async_msg_fifo, |
| sizeof(struct slimpro_resp_msg) * ASYNC_MSG_FIFO_SIZE, |
| GFP_KERNEL); |
| if (rc) |
| return -ENOMEM; |
| |
| INIT_WORK(&ctx->workq, xgene_hwmon_evt_work); |
| |
| /* Request mailbox channel */ |
| cl->dev = &pdev->dev; |
| cl->tx_done = xgene_hwmon_tx_done; |
| cl->tx_block = false; |
| cl->tx_tout = MBOX_OP_TIMEOUTMS; |
| cl->knows_txdone = false; |
| if (acpi_disabled) { |
| cl->rx_callback = xgene_hwmon_rx_cb; |
| ctx->mbox_chan = mbox_request_channel(cl, 0); |
| if (IS_ERR(ctx->mbox_chan)) { |
| dev_err(&pdev->dev, |
| "SLIMpro mailbox channel request failed\n"); |
| rc = -ENODEV; |
| goto out_mbox_free; |
| } |
| } else { |
| struct pcc_mbox_chan *pcc_chan; |
| const struct acpi_device_id *acpi_id; |
| int version; |
| |
| acpi_id = acpi_match_device(pdev->dev.driver->acpi_match_table, |
| &pdev->dev); |
| if (!acpi_id) |
| return -EINVAL; |
| |
| version = (int)acpi_id->driver_data; |
| |
| if (device_property_read_u32(&pdev->dev, "pcc-channel", |
| &ctx->mbox_idx)) { |
| dev_err(&pdev->dev, "no pcc-channel property\n"); |
| rc = -ENODEV; |
| goto out_mbox_free; |
| } |
| |
| cl->rx_callback = xgene_hwmon_pcc_rx_cb; |
| pcc_chan = pcc_mbox_request_channel(cl, ctx->mbox_idx); |
| if (IS_ERR(pcc_chan)) { |
| dev_err(&pdev->dev, |
| "PPC channel request failed\n"); |
| rc = -ENODEV; |
| goto out_mbox_free; |
| } |
| |
| ctx->pcc_chan = pcc_chan; |
| ctx->mbox_chan = pcc_chan->mchan; |
| |
| if (!ctx->mbox_chan->mbox->txdone_irq) { |
| dev_err(&pdev->dev, "PCC IRQ not supported\n"); |
| rc = -ENODEV; |
| goto out; |
| } |
| |
| /* |
| * This is the shared communication region |
| * for the OS and Platform to communicate over. |
| */ |
| ctx->comm_base_addr = pcc_chan->shmem_base_addr; |
| if (ctx->comm_base_addr) { |
| if (version == XGENE_HWMON_V2) |
| ctx->pcc_comm_addr = (void __force *)ioremap( |
| ctx->comm_base_addr, |
| pcc_chan->shmem_size); |
| else |
| ctx->pcc_comm_addr = memremap( |
| ctx->comm_base_addr, |
| pcc_chan->shmem_size, |
| MEMREMAP_WB); |
| } else { |
| dev_err(&pdev->dev, "Failed to get PCC comm region\n"); |
| rc = -ENODEV; |
| goto out; |
| } |
| |
| if (!ctx->pcc_comm_addr) { |
| dev_err(&pdev->dev, |
| "Failed to ioremap PCC comm region\n"); |
| rc = -ENOMEM; |
| goto out; |
| } |
| |
| /* |
| * pcc_chan->latency is just a Nominal value. In reality |
| * the remote processor could be much slower to reply. |
| * So add an arbitrary amount of wait on top of Nominal. |
| */ |
| ctx->usecs_lat = PCC_NUM_RETRIES * pcc_chan->latency; |
| } |
| |
| ctx->hwmon_dev = hwmon_device_register_with_groups(ctx->dev, |
| "apm_xgene", |
| ctx, |
| xgene_hwmon_groups); |
| if (IS_ERR(ctx->hwmon_dev)) { |
| dev_err(&pdev->dev, "Failed to register HW monitor device\n"); |
| rc = PTR_ERR(ctx->hwmon_dev); |
| goto out; |
| } |
| |
| /* |
| * Schedule the bottom handler if there is a pending message. |
| */ |
| schedule_work(&ctx->workq); |
| |
| dev_info(&pdev->dev, "APM X-Gene SoC HW monitor driver registered\n"); |
| |
| return 0; |
| |
| out: |
| if (acpi_disabled) |
| mbox_free_channel(ctx->mbox_chan); |
| else |
| pcc_mbox_free_channel(ctx->pcc_chan); |
| out_mbox_free: |
| kfifo_free(&ctx->async_msg_fifo); |
| |
| return rc; |
| } |
| |
| static int xgene_hwmon_remove(struct platform_device *pdev) |
| { |
| struct xgene_hwmon_dev *ctx = platform_get_drvdata(pdev); |
| |
| hwmon_device_unregister(ctx->hwmon_dev); |
| kfifo_free(&ctx->async_msg_fifo); |
| if (acpi_disabled) |
| mbox_free_channel(ctx->mbox_chan); |
| else |
| pcc_mbox_free_channel(ctx->pcc_chan); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id xgene_hwmon_of_match[] = { |
| {.compatible = "apm,xgene-slimpro-hwmon"}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, xgene_hwmon_of_match); |
| |
| static struct platform_driver xgene_hwmon_driver = { |
| .probe = xgene_hwmon_probe, |
| .remove = xgene_hwmon_remove, |
| .driver = { |
| .name = "xgene-slimpro-hwmon", |
| .of_match_table = xgene_hwmon_of_match, |
| .acpi_match_table = ACPI_PTR(xgene_hwmon_acpi_match), |
| }, |
| }; |
| module_platform_driver(xgene_hwmon_driver); |
| |
| MODULE_DESCRIPTION("APM X-Gene SoC hardware monitor"); |
| MODULE_LICENSE("GPL"); |