include/uapi/linux/can/isotp.h - linux - Git at Google

 /* SPDX-License-Identifier: ((GPL-2.0-only WITH Linux-syscall-note) OR BSD-3-Clause) */
 /*
  * linux/can/isotp.h
  *
  * Definitions for isotp CAN sockets (ISO 15765-2:2016)
  *
  * Copyright (c) 2020 Volkswagen Group Electronic Research
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
  * are met:
  * 1. Redistributions of source code must retain the above copyright
  *    notice, this list of conditions and the following disclaimer.
  * 2. Redistributions in binary form must reproduce the above copyright
  *    notice, this list of conditions and the following disclaimer in the
  *    documentation and/or other materials provided with the distribution.
  * 3. Neither the name of Volkswagen nor the names of its contributors
  *    may be used to endorse or promote products derived from this software
  *    without specific prior written permission.
  *
  * Alternatively, provided that this notice is retained in full, this
  * software may be distributed under the terms of the GNU General
  * Public License ("GPL") version 2, in which case the provisions of the
  * GPL apply INSTEAD OF those given above.
  *
  * The provided data structures and external interfaces from this code
  * are not restricted to be used by modules with a GPL compatible license.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
  * DAMAGE.
  */

 #ifndef _UAPI_CAN_ISOTP_H
 #define _UAPI_CAN_ISOTP_H

 #include <linux/types.h>
 #include <linux/can.h>

 #define SOL_CAN_ISOTP (SOL_CAN_BASE + CAN_ISOTP)

 /* for socket options affecting the socket (not the global system) */

 #define CAN_ISOTP_OPTS		1	/* pass struct can_isotp_options */

 #define CAN_ISOTP_RECV_FC	2	/* pass struct can_isotp_fc_options */

 /* sockopts to force stmin timer values for protocol regression tests */

 #define CAN_ISOTP_TX_STMIN	3	/* pass __u32 value in nano secs    */
 					/* use this time instead of value   */
 					/* provided in FC from the receiver */

 #define CAN_ISOTP_RX_STMIN	4	/* pass __u32 value in nano secs   */
 					/* ignore received CF frames which */
 					/* timestamps differ less than val */

 #define CAN_ISOTP_LL_OPTS	5	/* pass struct can_isotp_ll_options */

 struct can_isotp_options {

 	__u32 flags;		/* set flags for isotp behaviour.	*/
 				/* __u32 value : flags see below	*/

 	__u32 frame_txtime;	/* frame transmission time (N_As/N_Ar)	*/
 				/* __u32 value : time in nano secs	*/

 	__u8  ext_address;	/* set address for extended addressing	*/
 				/* __u8 value : extended address	*/

 	__u8  txpad_content;	/* set content of padding byte (tx)	*/
 				/* __u8 value : content	on tx path	*/

 	__u8  rxpad_content;	/* set content of padding byte (rx)	*/
 				/* __u8 value : content	on rx path	*/

 	__u8  rx_ext_address;	/* set address for extended addressing	*/
 				/* __u8 value : extended address (rx)	*/
 };

 struct can_isotp_fc_options {

 	__u8  bs;		/* blocksize provided in FC frame	*/
 				/* __u8 value : blocksize. 0 = off	*/

 	__u8  stmin;		/* separation time provided in FC frame	*/
 				/* __u8 value :				*/
 				/* 0x00 - 0x7F : 0 - 127 ms		*/
 				/* 0x80 - 0xF0 : reserved		*/
 				/* 0xF1 - 0xF9 : 100 us - 900 us	*/
 				/* 0xFA - 0xFF : reserved		*/

 	__u8  wftmax;		/* max. number of wait frame transmiss.	*/
 				/* __u8 value : 0 = omit FC N_PDU WT	*/
 };

 struct can_isotp_ll_options {

 	__u8  mtu;		/* generated & accepted CAN frame type	*/
 				/* __u8 value :				*/
 				/* CAN_MTU   (16) -> standard CAN 2.0	*/
 				/* CANFD_MTU (72) -> CAN FD frame	*/

 	__u8  tx_dl;		/* tx link layer data length in bytes	*/
 				/* (configured maximum payload length)	*/
 				/* __u8 value : 8,12,16,20,24,32,48,64	*/
 				/* => rx path supports all LL_DL values */

 	__u8  tx_flags;		/* set into struct canfd_frame.flags	*/
 				/* at frame creation: e.g. CANFD_BRS	*/
 				/* Obsolete when the BRS flag is fixed	*/
 				/* by the CAN netdriver configuration	*/
 };

 /* flags for isotp behaviour */

 #define CAN_ISOTP_LISTEN_MODE	0x001	/* listen only (do not send FC) */
 #define CAN_ISOTP_EXTEND_ADDR	0x002	/* enable extended addressing */
 #define CAN_ISOTP_TX_PADDING	0x004	/* enable CAN frame padding tx path */
 #define CAN_ISOTP_RX_PADDING	0x008	/* enable CAN frame padding rx path */
 #define CAN_ISOTP_CHK_PAD_LEN	0x010	/* check received CAN frame padding */
 #define CAN_ISOTP_CHK_PAD_DATA	0x020	/* check received CAN frame padding */
 #define CAN_ISOTP_HALF_DUPLEX	0x040	/* half duplex error state handling */
 #define CAN_ISOTP_FORCE_TXSTMIN	0x080	/* ignore stmin from received FC */
 #define CAN_ISOTP_FORCE_RXSTMIN	0x100	/* ignore CFs depending on rx stmin */
 #define CAN_ISOTP_RX_EXT_ADDR	0x200	/* different rx extended addressing */
 #define CAN_ISOTP_WAIT_TX_DONE	0x400	/* wait for tx completion */
 #define CAN_ISOTP_SF_BROADCAST	0x800	/* 1-to-N functional addressing */

 /* default values */

 #define CAN_ISOTP_DEFAULT_FLAGS		0
 #define CAN_ISOTP_DEFAULT_EXT_ADDRESS	0x00
 #define CAN_ISOTP_DEFAULT_PAD_CONTENT	0xCC /* prevent bit-stuffing */
 #define CAN_ISOTP_DEFAULT_FRAME_TXTIME	0
 #define CAN_ISOTP_DEFAULT_RECV_BS	0
 #define CAN_ISOTP_DEFAULT_RECV_STMIN	0x00
 #define CAN_ISOTP_DEFAULT_RECV_WFTMAX	0

 #define CAN_ISOTP_DEFAULT_LL_MTU	CAN_MTU
 #define CAN_ISOTP_DEFAULT_LL_TX_DL	CAN_MAX_DLEN
 #define CAN_ISOTP_DEFAULT_LL_TX_FLAGS	0

 /*
  * Remark on CAN_ISOTP_DEFAULT_RECV_* values:
  *
  * We can strongly assume, that the Linux Kernel implementation of
  * CAN_ISOTP is capable to run with BS=0, STmin=0 and WFTmax=0.
  * But as we like to be able to behave as a commonly available ECU,
  * these default settings can be changed via sockopts.
  * For that reason the STmin value is intentionally _not_ checked for
  * consistency and copied directly into the flow control (FC) frame.
  */

 #endif /* !_UAPI_CAN_ISOTP_H */
	/* SPDX-License-Identifier: ((GPL-2.0-only WITH Linux-syscall-note) OR BSD-3-Clause) */
	/*
	* linux/can/isotp.h
	*
	* Definitions for isotp CAN sockets (ISO 15765-2:2016)
	*
	* Copyright (c) 2020 Volkswagen Group Electronic Research
	* All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions
	* are met:
	* 1. Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* 2. Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution.
	* 3. Neither the name of Volkswagen nor the names of its contributors
	* may be used to endorse or promote products derived from this software
	* without specific prior written permission.
	*
	* Alternatively, provided that this notice is retained in full, this
	* software may be distributed under the terms of the GNU General
	* Public License ("GPL") version 2, in which case the provisions of the
	* GPL apply INSTEAD OF those given above.
	*
	* The provided data structures and external interfaces from this code
	* are not restricted to be used by modules with a GPL compatible license.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
	* DAMAGE.
	*/

	#ifndef _UAPI_CAN_ISOTP_H
	#define _UAPI_CAN_ISOTP_H

	#include <linux/types.h>
	#include <linux/can.h>

	#define SOL_CAN_ISOTP (SOL_CAN_BASE + CAN_ISOTP)

	/* for socket options affecting the socket (not the global system) */

	#define CAN_ISOTP_OPTS 1 /* pass struct can_isotp_options */

	#define CAN_ISOTP_RECV_FC 2 /* pass struct can_isotp_fc_options */

	/* sockopts to force stmin timer values for protocol regression tests */

	#define CAN_ISOTP_TX_STMIN 3 /* pass __u32 value in nano secs */
	/* use this time instead of value */
	/* provided in FC from the receiver */

	#define CAN_ISOTP_RX_STMIN 4 /* pass __u32 value in nano secs */
	/* ignore received CF frames which */
	/* timestamps differ less than val */

	#define CAN_ISOTP_LL_OPTS 5 /* pass struct can_isotp_ll_options */

	struct can_isotp_options {

	__u32 flags; /* set flags for isotp behaviour. */
	/* __u32 value : flags see below */

	__u32 frame_txtime; /* frame transmission time (N_As/N_Ar) */
	/* __u32 value : time in nano secs */

	__u8 ext_address; /* set address for extended addressing */
	/* __u8 value : extended address */

	__u8 txpad_content; /* set content of padding byte (tx) */
	/* __u8 value : content on tx path */

	__u8 rxpad_content; /* set content of padding byte (rx) */
	/* __u8 value : content on rx path */

	__u8 rx_ext_address; /* set address for extended addressing */
	/* __u8 value : extended address (rx) */
	};

	struct can_isotp_fc_options {

	__u8 bs; /* blocksize provided in FC frame */
	/* __u8 value : blocksize. 0 = off */

	__u8 stmin; /* separation time provided in FC frame */
	/* __u8 value : */
	/* 0x00 - 0x7F : 0 - 127 ms */
	/* 0x80 - 0xF0 : reserved */
	/* 0xF1 - 0xF9 : 100 us - 900 us */
	/* 0xFA - 0xFF : reserved */

	__u8 wftmax; /* max. number of wait frame transmiss. */
	/* __u8 value : 0 = omit FC N_PDU WT */
	};

	struct can_isotp_ll_options {

	__u8 mtu; /* generated & accepted CAN frame type */
	/* __u8 value : */
	/* CAN_MTU (16) -> standard CAN 2.0 */
	/* CANFD_MTU (72) -> CAN FD frame */

	__u8 tx_dl; /* tx link layer data length in bytes */
	/* (configured maximum payload length) */
	/* __u8 value : 8,12,16,20,24,32,48,64 */
	/* => rx path supports all LL_DL values */

	__u8 tx_flags; /* set into struct canfd_frame.flags */
	/* at frame creation: e.g. CANFD_BRS */
	/* Obsolete when the BRS flag is fixed */
	/* by the CAN netdriver configuration */
	};

	/* flags for isotp behaviour */

	#define CAN_ISOTP_LISTEN_MODE 0x001 /* listen only (do not send FC) */
	#define CAN_ISOTP_EXTEND_ADDR 0x002 /* enable extended addressing */
	#define CAN_ISOTP_TX_PADDING 0x004 /* enable CAN frame padding tx path */
	#define CAN_ISOTP_RX_PADDING 0x008 /* enable CAN frame padding rx path */
	#define CAN_ISOTP_CHK_PAD_LEN 0x010 /* check received CAN frame padding */
	#define CAN_ISOTP_CHK_PAD_DATA 0x020 /* check received CAN frame padding */
	#define CAN_ISOTP_HALF_DUPLEX 0x040 /* half duplex error state handling */
	#define CAN_ISOTP_FORCE_TXSTMIN 0x080 /* ignore stmin from received FC */
	#define CAN_ISOTP_FORCE_RXSTMIN 0x100 /* ignore CFs depending on rx stmin */
	#define CAN_ISOTP_RX_EXT_ADDR 0x200 /* different rx extended addressing */
	#define CAN_ISOTP_WAIT_TX_DONE 0x400 /* wait for tx completion */
	#define CAN_ISOTP_SF_BROADCAST 0x800 /* 1-to-N functional addressing */

	/* default values */

	#define CAN_ISOTP_DEFAULT_FLAGS 0
	#define CAN_ISOTP_DEFAULT_EXT_ADDRESS 0x00
	#define CAN_ISOTP_DEFAULT_PAD_CONTENT 0xCC /* prevent bit-stuffing */
	#define CAN_ISOTP_DEFAULT_FRAME_TXTIME 0
	#define CAN_ISOTP_DEFAULT_RECV_BS 0
	#define CAN_ISOTP_DEFAULT_RECV_STMIN 0x00
	#define CAN_ISOTP_DEFAULT_RECV_WFTMAX 0

	#define CAN_ISOTP_DEFAULT_LL_MTU CAN_MTU
	#define CAN_ISOTP_DEFAULT_LL_TX_DL CAN_MAX_DLEN
	#define CAN_ISOTP_DEFAULT_LL_TX_FLAGS 0

	/*
	* Remark on CAN_ISOTP_DEFAULT_RECV_* values:
	*
	* We can strongly assume, that the Linux Kernel implementation of
	* CAN_ISOTP is capable to run with BS=0, STmin=0 and WFTmax=0.
	* But as we like to be able to behave as a commonly available ECU,
	* these default settings can be changed via sockopts.
	* For that reason the STmin value is intentionally _not_ checked for
	* consistency and copied directly into the flow control (FC) frame.
	*/

	#endif /* !_UAPI_CAN_ISOTP_H */