| // SPDX-License-Identifier: GPL-2.0 |
| // Copyright (c) 2018, The Linux Foundation. All rights reserved. |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/of.h> |
| #include <linux/clk.h> |
| #include <linux/clk-provider.h> |
| #include <linux/regmap.h> |
| |
| #include "clk-regmap.h" |
| #include "clk-hfpll.h" |
| |
| static const struct hfpll_data hdata = { |
| .mode_reg = 0x00, |
| .l_reg = 0x04, |
| .m_reg = 0x08, |
| .n_reg = 0x0c, |
| .user_reg = 0x10, |
| .config_reg = 0x14, |
| .config_val = 0x430405d, |
| .status_reg = 0x1c, |
| .lock_bit = 16, |
| |
| .user_val = 0x8, |
| .user_vco_mask = 0x100000, |
| .low_vco_max_rate = 1248000000, |
| .min_rate = 537600000UL, |
| .max_rate = 2900000000UL, |
| }; |
| |
| static const struct of_device_id qcom_hfpll_match_table[] = { |
| { .compatible = "qcom,hfpll" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, qcom_hfpll_match_table); |
| |
| static const struct regmap_config hfpll_regmap_config = { |
| .reg_bits = 32, |
| .reg_stride = 4, |
| .val_bits = 32, |
| .max_register = 0x30, |
| .fast_io = true, |
| }; |
| |
| static int qcom_hfpll_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| void __iomem *base; |
| struct regmap *regmap; |
| struct clk_hfpll *h; |
| struct clk_init_data init = { |
| .num_parents = 1, |
| .ops = &clk_ops_hfpll, |
| /* |
| * rather than marking the clock critical and forcing the clock |
| * to be always enabled, we make sure that the clock is not |
| * disabled: the firmware remains responsible of enabling this |
| * clock (for more info check the commit log) |
| */ |
| .flags = CLK_IGNORE_UNUSED, |
| }; |
| int ret; |
| struct clk_parent_data pdata = { .index = 0 }; |
| |
| h = devm_kzalloc(dev, sizeof(*h), GFP_KERNEL); |
| if (!h) |
| return -ENOMEM; |
| |
| base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL); |
| if (IS_ERR(base)) |
| return PTR_ERR(base); |
| |
| regmap = devm_regmap_init_mmio(&pdev->dev, base, &hfpll_regmap_config); |
| if (IS_ERR(regmap)) |
| return PTR_ERR(regmap); |
| |
| if (of_property_read_string_index(dev->of_node, "clock-output-names", |
| 0, &init.name)) |
| return -ENODEV; |
| |
| init.parent_data = &pdata; |
| |
| h->d = &hdata; |
| h->clkr.hw.init = &init; |
| spin_lock_init(&h->lock); |
| |
| ret = devm_clk_register_regmap(dev, &h->clkr); |
| if (ret) { |
| dev_err(dev, "failed to register regmap clock: %d\n", ret); |
| return ret; |
| } |
| |
| return devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, |
| &h->clkr.hw); |
| } |
| |
| static struct platform_driver qcom_hfpll_driver = { |
| .probe = qcom_hfpll_probe, |
| .driver = { |
| .name = "qcom-hfpll", |
| .of_match_table = qcom_hfpll_match_table, |
| }, |
| }; |
| module_platform_driver(qcom_hfpll_driver); |
| |
| MODULE_DESCRIPTION("QCOM HFPLL Clock Driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:qcom-hfpll"); |