drivers/gpu/drm/nouveau/nvkm/engine/device/gm100.c - linux - Git at Google

 /*
  * Copyright 2012 Red Hat Inc.
  *
  * Permission is hereby granted, free of charge, to any person obtaining a
  * copy of this software and associated documentation files (the "Software"),
  * to deal in the Software without restriction, including without limitation
  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
  * and/or sell copies of the Software, and to permit persons to whom the
  * Software is furnished to do so, subject to the following conditions:
  *
  * The above copyright notice and this permission notice shall be included in
  * all copies or substantial portions of the Software.
  *
  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
  * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
  * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  * OTHER DEALINGS IN THE SOFTWARE.
  *
  * Authors: Ben Skeggs
  */
 #include "priv.h"

 #include <subdev/bios.h>
 #include <subdev/bus.h>
 #include <subdev/gpio.h>
 #include <subdev/i2c.h>
 #include <subdev/fuse.h>
 #include <subdev/clk.h>
 #include <subdev/therm.h>
 #include <subdev/mxm.h>
 #include <subdev/devinit.h>
 #include <subdev/mc.h>
 #include <subdev/timer.h>
 #include <subdev/fb.h>
 #include <subdev/ltc.h>
 #include <subdev/ibus.h>
 #include <subdev/instmem.h>
 #include <subdev/mmu.h>
 #include <subdev/bar.h>
 #include <subdev/pmu.h>
 #include <subdev/volt.h>

 #include <engine/dmaobj.h>
 #include <engine/fifo.h>
 #include <engine/sw.h>
 #include <engine/gr.h>
 #include <engine/disp.h>
 #include <engine/ce.h>
 #include <engine/bsp.h>
 #include <engine/msvld.h>
 #include <engine/mspdec.h>
 #include <engine/msppp.h>
 #include <engine/pm.h>

 int
 gm100_identify(struct nvkm_device *device)
 {
 	switch (device->chipset) {
 	case 0x117:
 		device->cname = "GM107";
 		device->oclass[NVDEV_SUBDEV_VBIOS  ] = &nvkm_bios_oclass;
 		device->oclass[NVDEV_SUBDEV_GPIO   ] =  gk104_gpio_oclass;
 		device->oclass[NVDEV_SUBDEV_I2C    ] =  gf110_i2c_oclass;
 		device->oclass[NVDEV_SUBDEV_FUSE   ] = &gm107_fuse_oclass;
 		device->oclass[NVDEV_SUBDEV_CLK    ] = &gk104_clk_oclass;
 		device->oclass[NVDEV_SUBDEV_THERM  ] = &gm107_therm_oclass;
 		device->oclass[NVDEV_SUBDEV_MXM    ] = &nv50_mxm_oclass;
 		device->oclass[NVDEV_SUBDEV_DEVINIT] =  gm107_devinit_oclass;
 		device->oclass[NVDEV_SUBDEV_MC     ] =  gk20a_mc_oclass;
 		device->oclass[NVDEV_SUBDEV_BUS    ] =  gf100_bus_oclass;
 		device->oclass[NVDEV_SUBDEV_TIMER  ] = &gk20a_timer_oclass;
 		device->oclass[NVDEV_SUBDEV_FB     ] =  gm107_fb_oclass;
 		device->oclass[NVDEV_SUBDEV_LTC    ] =  gm107_ltc_oclass;
 		device->oclass[NVDEV_SUBDEV_IBUS   ] = &gk104_ibus_oclass;
 		device->oclass[NVDEV_SUBDEV_INSTMEM] =  nv50_instmem_oclass;
 		device->oclass[NVDEV_SUBDEV_MMU    ] = &gf100_mmu_oclass;
 		device->oclass[NVDEV_SUBDEV_BAR    ] = &gf100_bar_oclass;
 		device->oclass[NVDEV_SUBDEV_PMU    ] =  gk208_pmu_oclass;

 #if 0
 		device->oclass[NVDEV_SUBDEV_VOLT   ] = &nv40_volt_oclass;
 #endif
 		device->oclass[NVDEV_ENGINE_DMAOBJ ] =  gf110_dmaeng_oclass;
 		device->oclass[NVDEV_ENGINE_FIFO   ] =  gk208_fifo_oclass;
 		device->oclass[NVDEV_ENGINE_SW     ] =  gf100_sw_oclass;
 		device->oclass[NVDEV_ENGINE_GR     ] =  gm107_gr_oclass;
 		device->oclass[NVDEV_ENGINE_DISP   ] =  gm107_disp_oclass;
 		device->oclass[NVDEV_ENGINE_CE0    ] = &gk104_ce0_oclass;
 #if 0
 		device->oclass[NVDEV_ENGINE_CE1    ] = &gk104_ce1_oclass;
 #endif
 		device->oclass[NVDEV_ENGINE_CE2    ] = &gk104_ce2_oclass;
 #if 0
 		device->oclass[NVDEV_ENGINE_MSVLD  ] = &gk104_msvld_oclass;
 		device->oclass[NVDEV_ENGINE_MSPDEC ] = &gk104_mspdec_oclass;
 		device->oclass[NVDEV_ENGINE_MSPPP  ] = &gf100_msppp_oclass;
 #endif
 		break;
 	case 0x124:
 		device->cname = "GM204";
 		device->oclass[NVDEV_SUBDEV_VBIOS  ] = &nvkm_bios_oclass;
 		device->oclass[NVDEV_SUBDEV_GPIO   ] =  gk104_gpio_oclass;
 		device->oclass[NVDEV_SUBDEV_I2C    ] =  gm204_i2c_oclass;
 		device->oclass[NVDEV_SUBDEV_FUSE   ] = &gm107_fuse_oclass;
 #if 0
 		/* looks to be some non-trivial changes */
 		device->oclass[NVDEV_SUBDEV_CLK    ] = &gk104_clk_oclass;
 		/* priv ring says no to 0x10eb14 writes */
 		device->oclass[NVDEV_SUBDEV_THERM  ] = &gm107_therm_oclass;
 #endif
 		device->oclass[NVDEV_SUBDEV_MXM    ] = &nv50_mxm_oclass;
 		device->oclass[NVDEV_SUBDEV_DEVINIT] =  gm204_devinit_oclass;
 		device->oclass[NVDEV_SUBDEV_MC     ] =  gk20a_mc_oclass;
 		device->oclass[NVDEV_SUBDEV_BUS    ] =  gf100_bus_oclass;
 		device->oclass[NVDEV_SUBDEV_TIMER  ] = &gk20a_timer_oclass;
 		device->oclass[NVDEV_SUBDEV_FB     ] =  gm107_fb_oclass;
 		device->oclass[NVDEV_SUBDEV_LTC    ] =  gm107_ltc_oclass;
 		device->oclass[NVDEV_SUBDEV_IBUS   ] = &gk104_ibus_oclass;
 		device->oclass[NVDEV_SUBDEV_INSTMEM] =  nv50_instmem_oclass;
 		device->oclass[NVDEV_SUBDEV_MMU    ] = &gf100_mmu_oclass;
 		device->oclass[NVDEV_SUBDEV_BAR    ] = &gf100_bar_oclass;
 		device->oclass[NVDEV_SUBDEV_PMU    ] =  gk208_pmu_oclass;
 #if 0
 		device->oclass[NVDEV_SUBDEV_VOLT   ] = &nv40_volt_oclass;
 #endif
 		device->oclass[NVDEV_ENGINE_DMAOBJ ] =  gf110_dmaeng_oclass;
 #if 0
 		device->oclass[NVDEV_ENGINE_FIFO   ] =  gk208_fifo_oclass;
 		device->oclass[NVDEV_ENGINE_SW     ] =  gf100_sw_oclass;
 		device->oclass[NVDEV_ENGINE_GR     ] =  gm107_gr_oclass;
 #endif
 		device->oclass[NVDEV_ENGINE_DISP   ] =  gm204_disp_oclass;
 #if 0
 		device->oclass[NVDEV_ENGINE_CE0    ] = &gm204_ce0_oclass;
 		device->oclass[NVDEV_ENGINE_CE1    ] = &gm204_ce1_oclass;
 		device->oclass[NVDEV_ENGINE_CE2    ] = &gm204_ce2_oclass;
 		device->oclass[NVDEV_ENGINE_MSVLD  ] = &gk104_msvld_oclass;
 		device->oclass[NVDEV_ENGINE_MSPDEC ] = &gk104_mspdec_oclass;
 		device->oclass[NVDEV_ENGINE_MSPPP  ] = &gf100_msppp_oclass;
 #endif
 		break;
 	case 0x126:
 		device->cname = "GM206";
 		device->oclass[NVDEV_SUBDEV_VBIOS  ] = &nvkm_bios_oclass;
 		device->oclass[NVDEV_SUBDEV_GPIO   ] =  gk104_gpio_oclass;
 		device->oclass[NVDEV_SUBDEV_I2C    ] =  gm204_i2c_oclass;
 		device->oclass[NVDEV_SUBDEV_FUSE   ] = &gm107_fuse_oclass;
 #if 0
 		/* looks to be some non-trivial changes */
 		device->oclass[NVDEV_SUBDEV_CLK    ] = &gk104_clk_oclass;
 		/* priv ring says no to 0x10eb14 writes */
 		device->oclass[NVDEV_SUBDEV_THERM  ] = &gm107_therm_oclass;
 #endif
 		device->oclass[NVDEV_SUBDEV_MXM    ] = &nv50_mxm_oclass;
 		device->oclass[NVDEV_SUBDEV_DEVINIT] =  gm204_devinit_oclass;
 		device->oclass[NVDEV_SUBDEV_MC     ] =  gk20a_mc_oclass;
 		device->oclass[NVDEV_SUBDEV_BUS    ] =  gf100_bus_oclass;
 		device->oclass[NVDEV_SUBDEV_TIMER  ] = &gk20a_timer_oclass;
 		device->oclass[NVDEV_SUBDEV_FB     ] =  gm107_fb_oclass;
 		device->oclass[NVDEV_SUBDEV_LTC    ] =  gm107_ltc_oclass;
 		device->oclass[NVDEV_SUBDEV_IBUS   ] = &gk104_ibus_oclass;
 		device->oclass[NVDEV_SUBDEV_INSTMEM] =  nv50_instmem_oclass;
 		device->oclass[NVDEV_SUBDEV_MMU    ] = &gf100_mmu_oclass;
 		device->oclass[NVDEV_SUBDEV_BAR    ] = &gf100_bar_oclass;
 		device->oclass[NVDEV_SUBDEV_PMU    ] =  gk208_pmu_oclass;
 #if 0
 		device->oclass[NVDEV_SUBDEV_VOLT   ] = &nv40_volt_oclass;
 #endif
 		device->oclass[NVDEV_ENGINE_DMAOBJ ] =  gf110_dmaeng_oclass;
 #if 0
 		device->oclass[NVDEV_ENGINE_FIFO   ] =  gk208_fifo_oclass;
 		device->oclass[NVDEV_ENGINE_SW     ] =  gf100_sw_oclass;
 		device->oclass[NVDEV_ENGINE_GR     ] =  gm107_gr_oclass;
 #endif
 		device->oclass[NVDEV_ENGINE_DISP   ] =  gm204_disp_oclass;
 #if 0
 		device->oclass[NVDEV_ENGINE_CE0    ] = &gm204_ce0_oclass;
 		device->oclass[NVDEV_ENGINE_CE1    ] = &gm204_ce1_oclass;
 		device->oclass[NVDEV_ENGINE_CE2    ] = &gm204_ce2_oclass;
 		device->oclass[NVDEV_ENGINE_MSVLD  ] = &gk104_msvld_oclass;
 		device->oclass[NVDEV_ENGINE_MSPDEC ] = &gk104_mspdec_oclass;
 		device->oclass[NVDEV_ENGINE_MSPPP  ] = &gf100_msppp_oclass;
 #endif
 		break;
 	default:
 		nv_fatal(device, "unknown Maxwell chipset\n");
 		return -EINVAL;
 	}

 	return 0;
 }
	/*
	* Copyright 2012 Red Hat Inc.
	*
	* Permission is hereby granted, free of charge, to any person obtaining a
	* copy of this software and associated documentation files (the "Software"),
	* to deal in the Software without restriction, including without limitation
	* the rights to use, copy, modify, merge, publish, distribute, sublicense,
	* and/or sell copies of the Software, and to permit persons to whom the
	* Software is furnished to do so, subject to the following conditions:
	*
	* The above copyright notice and this permission notice shall be included in
	* all copies or substantial portions of the Software.
	*
	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
	* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
	* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
	* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
	* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
	* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	* OTHER DEALINGS IN THE SOFTWARE.
	*
	* Authors: Ben Skeggs
	*/
	#include "priv.h"

	#include <subdev/bios.h>
	#include <subdev/bus.h>
	#include <subdev/gpio.h>
	#include <subdev/i2c.h>
	#include <subdev/fuse.h>
	#include <subdev/clk.h>
	#include <subdev/therm.h>
	#include <subdev/mxm.h>
	#include <subdev/devinit.h>
	#include <subdev/mc.h>
	#include <subdev/timer.h>
	#include <subdev/fb.h>
	#include <subdev/ltc.h>
	#include <subdev/ibus.h>
	#include <subdev/instmem.h>
	#include <subdev/mmu.h>
	#include <subdev/bar.h>
	#include <subdev/pmu.h>
	#include <subdev/volt.h>

	#include <engine/dmaobj.h>
	#include <engine/fifo.h>
	#include <engine/sw.h>
	#include <engine/gr.h>
	#include <engine/disp.h>
	#include <engine/ce.h>
	#include <engine/bsp.h>
	#include <engine/msvld.h>
	#include <engine/mspdec.h>
	#include <engine/msppp.h>
	#include <engine/pm.h>

	int
	gm100_identify(struct nvkm_device *device)
	{
	switch (device->chipset) {
	case 0x117:
	device->cname = "GM107";
	device->oclass[NVDEV_SUBDEV_VBIOS ] = &nvkm_bios_oclass;
	device->oclass[NVDEV_SUBDEV_GPIO ] = gk104_gpio_oclass;
	device->oclass[NVDEV_SUBDEV_I2C ] = gf110_i2c_oclass;
	device->oclass[NVDEV_SUBDEV_FUSE ] = &gm107_fuse_oclass;
	device->oclass[NVDEV_SUBDEV_CLK ] = &gk104_clk_oclass;
	device->oclass[NVDEV_SUBDEV_THERM ] = &gm107_therm_oclass;
	device->oclass[NVDEV_SUBDEV_MXM ] = &nv50_mxm_oclass;
	device->oclass[NVDEV_SUBDEV_DEVINIT] = gm107_devinit_oclass;
	device->oclass[NVDEV_SUBDEV_MC ] = gk20a_mc_oclass;
	device->oclass[NVDEV_SUBDEV_BUS ] = gf100_bus_oclass;
	device->oclass[NVDEV_SUBDEV_TIMER ] = &gk20a_timer_oclass;
	device->oclass[NVDEV_SUBDEV_FB ] = gm107_fb_oclass;
	device->oclass[NVDEV_SUBDEV_LTC ] = gm107_ltc_oclass;
	device->oclass[NVDEV_SUBDEV_IBUS ] = &gk104_ibus_oclass;
	device->oclass[NVDEV_SUBDEV_INSTMEM] = nv50_instmem_oclass;
	device->oclass[NVDEV_SUBDEV_MMU ] = &gf100_mmu_oclass;
	device->oclass[NVDEV_SUBDEV_BAR ] = &gf100_bar_oclass;
	device->oclass[NVDEV_SUBDEV_PMU ] = gk208_pmu_oclass;

	#if 0
	device->oclass[NVDEV_SUBDEV_VOLT ] = &nv40_volt_oclass;
	#endif
	device->oclass[NVDEV_ENGINE_DMAOBJ ] = gf110_dmaeng_oclass;
	device->oclass[NVDEV_ENGINE_FIFO ] = gk208_fifo_oclass;
	device->oclass[NVDEV_ENGINE_SW ] = gf100_sw_oclass;
	device->oclass[NVDEV_ENGINE_GR ] = gm107_gr_oclass;
	device->oclass[NVDEV_ENGINE_DISP ] = gm107_disp_oclass;
	device->oclass[NVDEV_ENGINE_CE0 ] = &gk104_ce0_oclass;
	#if 0
	device->oclass[NVDEV_ENGINE_CE1 ] = &gk104_ce1_oclass;
	#endif
	device->oclass[NVDEV_ENGINE_CE2 ] = &gk104_ce2_oclass;
	#if 0
	device->oclass[NVDEV_ENGINE_MSVLD ] = &gk104_msvld_oclass;
	device->oclass[NVDEV_ENGINE_MSPDEC ] = &gk104_mspdec_oclass;
	device->oclass[NVDEV_ENGINE_MSPPP ] = &gf100_msppp_oclass;
	#endif
	break;
	case 0x124:
	device->cname = "GM204";
	device->oclass[NVDEV_SUBDEV_VBIOS ] = &nvkm_bios_oclass;
	device->oclass[NVDEV_SUBDEV_GPIO ] = gk104_gpio_oclass;
	device->oclass[NVDEV_SUBDEV_I2C ] = gm204_i2c_oclass;
	device->oclass[NVDEV_SUBDEV_FUSE ] = &gm107_fuse_oclass;
	#if 0
	/* looks to be some non-trivial changes */
	device->oclass[NVDEV_SUBDEV_CLK ] = &gk104_clk_oclass;
	/* priv ring says no to 0x10eb14 writes */
	device->oclass[NVDEV_SUBDEV_THERM ] = &gm107_therm_oclass;
	#endif
	device->oclass[NVDEV_SUBDEV_MXM ] = &nv50_mxm_oclass;
	device->oclass[NVDEV_SUBDEV_DEVINIT] = gm204_devinit_oclass;
	device->oclass[NVDEV_SUBDEV_MC ] = gk20a_mc_oclass;
	device->oclass[NVDEV_SUBDEV_BUS ] = gf100_bus_oclass;
	device->oclass[NVDEV_SUBDEV_TIMER ] = &gk20a_timer_oclass;
	device->oclass[NVDEV_SUBDEV_FB ] = gm107_fb_oclass;
	device->oclass[NVDEV_SUBDEV_LTC ] = gm107_ltc_oclass;
	device->oclass[NVDEV_SUBDEV_IBUS ] = &gk104_ibus_oclass;
	device->oclass[NVDEV_SUBDEV_INSTMEM] = nv50_instmem_oclass;
	device->oclass[NVDEV_SUBDEV_MMU ] = &gf100_mmu_oclass;
	device->oclass[NVDEV_SUBDEV_BAR ] = &gf100_bar_oclass;
	device->oclass[NVDEV_SUBDEV_PMU ] = gk208_pmu_oclass;
	#if 0
	device->oclass[NVDEV_SUBDEV_VOLT ] = &nv40_volt_oclass;
	#endif
	device->oclass[NVDEV_ENGINE_DMAOBJ ] = gf110_dmaeng_oclass;
	#if 0
	device->oclass[NVDEV_ENGINE_FIFO ] = gk208_fifo_oclass;
	device->oclass[NVDEV_ENGINE_SW ] = gf100_sw_oclass;
	device->oclass[NVDEV_ENGINE_GR ] = gm107_gr_oclass;
	#endif
	device->oclass[NVDEV_ENGINE_DISP ] = gm204_disp_oclass;
	#if 0
	device->oclass[NVDEV_ENGINE_CE0 ] = &gm204_ce0_oclass;
	device->oclass[NVDEV_ENGINE_CE1 ] = &gm204_ce1_oclass;
	device->oclass[NVDEV_ENGINE_CE2 ] = &gm204_ce2_oclass;
	device->oclass[NVDEV_ENGINE_MSVLD ] = &gk104_msvld_oclass;
	device->oclass[NVDEV_ENGINE_MSPDEC ] = &gk104_mspdec_oclass;
	device->oclass[NVDEV_ENGINE_MSPPP ] = &gf100_msppp_oclass;
	#endif
	break;
	case 0x126:
	device->cname = "GM206";
	device->oclass[NVDEV_SUBDEV_VBIOS ] = &nvkm_bios_oclass;
	device->oclass[NVDEV_SUBDEV_GPIO ] = gk104_gpio_oclass;
	device->oclass[NVDEV_SUBDEV_I2C ] = gm204_i2c_oclass;
	device->oclass[NVDEV_SUBDEV_FUSE ] = &gm107_fuse_oclass;
	#if 0
	/* looks to be some non-trivial changes */
	device->oclass[NVDEV_SUBDEV_CLK ] = &gk104_clk_oclass;
	/* priv ring says no to 0x10eb14 writes */
	device->oclass[NVDEV_SUBDEV_THERM ] = &gm107_therm_oclass;
	#endif
	device->oclass[NVDEV_SUBDEV_MXM ] = &nv50_mxm_oclass;
	device->oclass[NVDEV_SUBDEV_DEVINIT] = gm204_devinit_oclass;
	device->oclass[NVDEV_SUBDEV_MC ] = gk20a_mc_oclass;
	device->oclass[NVDEV_SUBDEV_BUS ] = gf100_bus_oclass;
	device->oclass[NVDEV_SUBDEV_TIMER ] = &gk20a_timer_oclass;
	device->oclass[NVDEV_SUBDEV_FB ] = gm107_fb_oclass;
	device->oclass[NVDEV_SUBDEV_LTC ] = gm107_ltc_oclass;
	device->oclass[NVDEV_SUBDEV_IBUS ] = &gk104_ibus_oclass;
	device->oclass[NVDEV_SUBDEV_INSTMEM] = nv50_instmem_oclass;
	device->oclass[NVDEV_SUBDEV_MMU ] = &gf100_mmu_oclass;
	device->oclass[NVDEV_SUBDEV_BAR ] = &gf100_bar_oclass;
	device->oclass[NVDEV_SUBDEV_PMU ] = gk208_pmu_oclass;
	#if 0
	device->oclass[NVDEV_SUBDEV_VOLT ] = &nv40_volt_oclass;
	#endif
	device->oclass[NVDEV_ENGINE_DMAOBJ ] = gf110_dmaeng_oclass;
	#if 0
	device->oclass[NVDEV_ENGINE_FIFO ] = gk208_fifo_oclass;
	device->oclass[NVDEV_ENGINE_SW ] = gf100_sw_oclass;
	device->oclass[NVDEV_ENGINE_GR ] = gm107_gr_oclass;
	#endif
	device->oclass[NVDEV_ENGINE_DISP ] = gm204_disp_oclass;
	#if 0
	device->oclass[NVDEV_ENGINE_CE0 ] = &gm204_ce0_oclass;
	device->oclass[NVDEV_ENGINE_CE1 ] = &gm204_ce1_oclass;
	device->oclass[NVDEV_ENGINE_CE2 ] = &gm204_ce2_oclass;
	device->oclass[NVDEV_ENGINE_MSVLD ] = &gk104_msvld_oclass;
	device->oclass[NVDEV_ENGINE_MSPDEC ] = &gk104_mspdec_oclass;
	device->oclass[NVDEV_ENGINE_MSPPP ] = &gf100_msppp_oclass;
	#endif
	break;
	default:
	nv_fatal(device, "unknown Maxwell chipset\n");
	return -EINVAL;
	}

	return 0;
	}