arch/powerpc/include/asm/exception-64e.h - linux - Git at Google

 /* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
  *  Definitions for use by exception code on Book3-E
  *
  *  Copyright (C) 2008 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp.
  */
 #ifndef _ASM_POWERPC_EXCEPTION_64E_H
 #define _ASM_POWERPC_EXCEPTION_64E_H

 /*
  * SPRGs usage an other considerations...
  *
  * Since TLB miss and other standard exceptions can be interrupted by
  * critical exceptions which can themselves be interrupted by machine
  * checks, and since the two later can themselves cause a TLB miss when
  * hitting the linear mapping for the kernel stacks, we need to be a bit
  * creative on how we use SPRGs.
  *
  * The base idea is that we have one SRPG reserved for critical and one
  * for machine check interrupts. Those are used to save a GPR that can
  * then be used to get the PACA, and store as much context as we need
  * to save in there. That includes saving the SPRGs used by the TLB miss
  * handler for linear mapping misses and the associated SRR0/1 due to
  * the above re-entrancy issue.
  *
  * So here's the current usage pattern. It's done regardless of which
  * SPRGs are user-readable though, thus we might have to change some of
  * this later. In order to do that more easily, we use special constants
  * for naming them
  *
  * WARNING: Some of these SPRGs are user readable. We need to do something
  * about it as some point by making sure they can't be used to leak kernel
  * critical data
  */

 #define PACA_EXGDBELL PACA_EXGEN

 /* We are out of SPRGs so we save some things in the PACA. The normal
  * exception frame is smaller than the CRIT or MC one though
  */
 #define EX_R1		(0 * 8)
 #define EX_CR		(1 * 8)
 #define EX_R10		(2 * 8)
 #define EX_R11		(3 * 8)
 #define EX_R14		(4 * 8)
 #define EX_R15		(5 * 8)

 /*
  * The TLB miss exception uses different slots.
  *
  * The bolted variant uses only the first six fields,
  * which in combination with pgd and kernel_pgd fits in
  * one 64-byte cache line.
  */

 #define EX_TLB_R10	( 0 * 8)
 #define EX_TLB_R11	( 1 * 8)
 #define EX_TLB_R14	( 2 * 8)
 #define EX_TLB_R15	( 3 * 8)
 #define EX_TLB_R16	( 4 * 8)
 #define EX_TLB_CR	( 5 * 8)
 #define EX_TLB_R12	( 6 * 8)
 #define EX_TLB_R13	( 7 * 8)
 #define EX_TLB_DEAR	( 8 * 8) /* Level 0 and 2 only */
 #define EX_TLB_ESR	( 9 * 8) /* Level 0 and 2 only */
 #define EX_TLB_SRR0	(10 * 8)
 #define EX_TLB_SRR1	(11 * 8)
 #define EX_TLB_R7	(12 * 8)
 #ifdef CONFIG_BOOK3E_MMU_TLB_STATS
 #define EX_TLB_R8	(13 * 8)
 #define EX_TLB_R9	(14 * 8)
 #define EX_TLB_LR	(15 * 8)
 #define EX_TLB_SIZE	(16 * 8)
 #else
 #define EX_TLB_SIZE	(13 * 8)
 #endif

 #define	START_EXCEPTION(label)						\
 	.globl exc_##label##_book3e;					\
 exc_##label##_book3e:

 /* TLB miss exception prolog
  *
  * This prolog handles re-entrancy (up to 3 levels supported in the PACA
  * though we currently don't test for overflow). It provides you with a
  * re-entrancy safe working space of r10...r16 and CR with r12 being used
  * as the exception area pointer in the PACA for that level of re-entrancy
  * and r13 containing the PACA pointer.
  *
  * SRR0 and SRR1 are saved, but DEAR and ESR are not, since they don't apply
  * as-is for instruction exceptions. It's up to the actual exception code
  * to save them as well if required.
  */
 #define TLB_MISS_PROLOG							    \
 	mtspr	SPRN_SPRG_TLB_SCRATCH,r12;				    \
 	mfspr	r12,SPRN_SPRG_TLB_EXFRAME;				    \
 	std	r10,EX_TLB_R10(r12);					    \
 	mfcr	r10;							    \
 	std	r11,EX_TLB_R11(r12);					    \
 	mfspr	r11,SPRN_SPRG_TLB_SCRATCH;				    \
 	std	r13,EX_TLB_R13(r12);					    \
 	mfspr	r13,SPRN_SPRG_PACA;					    \
 	std	r14,EX_TLB_R14(r12);					    \
 	addi	r14,r12,EX_TLB_SIZE;					    \
 	std	r15,EX_TLB_R15(r12);					    \
 	mfspr	r15,SPRN_SRR1;						    \
 	std	r16,EX_TLB_R16(r12);					    \
 	mfspr	r16,SPRN_SRR0;						    \
 	std	r10,EX_TLB_CR(r12);					    \
 	std	r11,EX_TLB_R12(r12);					    \
 	mtspr	SPRN_SPRG_TLB_EXFRAME,r14;				    \
 	std	r15,EX_TLB_SRR1(r12);					    \
 	std	r16,EX_TLB_SRR0(r12);					    \
 	TLB_MISS_PROLOG_STATS

 /* And these are the matching epilogs that restores things
  *
  * There are 3 epilogs:
  *
  * - SUCCESS       : Unwinds one level
  * - ERROR         : restore from level 0 and reset
  * - ERROR_SPECIAL : restore from current level and reset
  *
  * Normal errors use ERROR, that is, they restore the initial fault context
  * and trigger a fault. However, there is a special case for linear mapping
  * errors. Those should basically never happen, but if they do happen, we
  * want the error to point out the context that did that linear mapping
  * fault, not the initial level 0 (basically, we got a bogus PGF or something
  * like that). For userland errors on the linear mapping, there is no
  * difference since those are always level 0 anyway
  */

 #define TLB_MISS_RESTORE(freg)						    \
 	ld	r14,EX_TLB_CR(r12);					    \
 	ld	r10,EX_TLB_R10(r12);					    \
 	ld	r15,EX_TLB_SRR0(r12);					    \
 	ld	r16,EX_TLB_SRR1(r12);					    \
 	mtspr	SPRN_SPRG_TLB_EXFRAME,freg;				    \
 	ld	r11,EX_TLB_R11(r12);					    \
 	mtcr	r14;							    \
 	ld	r13,EX_TLB_R13(r12);					    \
 	ld	r14,EX_TLB_R14(r12);					    \
 	mtspr	SPRN_SRR0,r15;						    \
 	ld	r15,EX_TLB_R15(r12);					    \
 	mtspr	SPRN_SRR1,r16;						    \
 	TLB_MISS_RESTORE_STATS						    \
 	ld	r16,EX_TLB_R16(r12);					    \
 	ld	r12,EX_TLB_R12(r12);					    \

 #define TLB_MISS_EPILOG_SUCCESS						    \
 	TLB_MISS_RESTORE(r12)

 #define TLB_MISS_EPILOG_ERROR						    \
 	addi	r12,r13,PACA_EXTLB;					    \
 	TLB_MISS_RESTORE(r12)

 #define TLB_MISS_EPILOG_ERROR_SPECIAL					    \
 	addi	r11,r13,PACA_EXTLB;					    \
 	TLB_MISS_RESTORE(r11)

 #ifdef CONFIG_BOOK3E_MMU_TLB_STATS
 #define TLB_MISS_PROLOG_STATS						    \
 	mflr	r10;							    \
 	std	r8,EX_TLB_R8(r12);					    \
 	std	r9,EX_TLB_R9(r12);					    \
 	std	r10,EX_TLB_LR(r12);
 #define TLB_MISS_RESTORE_STATS					            \
 	ld	r16,EX_TLB_LR(r12);					    \
 	ld	r9,EX_TLB_R9(r12);					    \
 	ld	r8,EX_TLB_R8(r12);					    \
 	mtlr	r16;
 #define TLB_MISS_STATS_D(name)						    \
 	addi	r9,r13,MMSTAT_DSTATS+name;				    \
 	bl	tlb_stat_inc;
 #define TLB_MISS_STATS_I(name)						    \
 	addi	r9,r13,MMSTAT_ISTATS+name;				    \
 	bl	tlb_stat_inc;
 #define TLB_MISS_STATS_X(name)						    \
 	ld	r8,PACA_EXTLB+EX_TLB_ESR(r13);				    \
 	cmpdi	cr2,r8,-1;						    \
 	beq	cr2,61f;						    \
 	addi	r9,r13,MMSTAT_DSTATS+name;				    \
 	b	62f;							    \
 61:	addi	r9,r13,MMSTAT_ISTATS+name;				    \
 62:	bl	tlb_stat_inc;
 #define TLB_MISS_STATS_SAVE_INFO					    \
 	std	r14,EX_TLB_ESR(r12);	/* save ESR */
 #define TLB_MISS_STATS_SAVE_INFO_BOLTED					    \
 	std	r14,PACA_EXTLB+EX_TLB_ESR(r13);	/* save ESR */
 #else
 #define TLB_MISS_PROLOG_STATS
 #define TLB_MISS_RESTORE_STATS
 #define TLB_MISS_PROLOG_STATS_BOLTED
 #define TLB_MISS_RESTORE_STATS_BOLTED
 #define TLB_MISS_STATS_D(name)
 #define TLB_MISS_STATS_I(name)
 #define TLB_MISS_STATS_X(name)
 #define TLB_MISS_STATS_Y(name)
 #define TLB_MISS_STATS_SAVE_INFO
 #define TLB_MISS_STATS_SAVE_INFO_BOLTED
 #endif

 #define SET_IVOR(vector_number, vector_offset)	\
 	LOAD_REG_ADDR(r3,interrupt_base_book3e);\
 	ori	r3,r3,vector_offset@l;		\
 	mtspr	SPRN_IVOR##vector_number,r3;

 #define RFI_TO_KERNEL							\
 	rfi

 #define RFI_TO_USER							\
 	rfi

 #endif /* _ASM_POWERPC_EXCEPTION_64E_H */
	/* SPDX-License-Identifier: GPL-2.0-or-later */
	/*
	* Definitions for use by exception code on Book3-E
	*
	* Copyright (C) 2008 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp.
	*/
	#ifndef _ASM_POWERPC_EXCEPTION_64E_H
	#define _ASM_POWERPC_EXCEPTION_64E_H

	/*
	* SPRGs usage an other considerations...
	*
	* Since TLB miss and other standard exceptions can be interrupted by
	* critical exceptions which can themselves be interrupted by machine
	* checks, and since the two later can themselves cause a TLB miss when
	* hitting the linear mapping for the kernel stacks, we need to be a bit
	* creative on how we use SPRGs.
	*
	* The base idea is that we have one SRPG reserved for critical and one
	* for machine check interrupts. Those are used to save a GPR that can
	* then be used to get the PACA, and store as much context as we need
	* to save in there. That includes saving the SPRGs used by the TLB miss
	* handler for linear mapping misses and the associated SRR0/1 due to
	* the above re-entrancy issue.
	*
	* So here's the current usage pattern. It's done regardless of which
	* SPRGs are user-readable though, thus we might have to change some of
	* this later. In order to do that more easily, we use special constants
	* for naming them
	*
	* WARNING: Some of these SPRGs are user readable. We need to do something
	* about it as some point by making sure they can't be used to leak kernel
	* critical data
	*/

	#define PACA_EXGDBELL PACA_EXGEN

	/* We are out of SPRGs so we save some things in the PACA. The normal
	* exception frame is smaller than the CRIT or MC one though
	*/
	#define EX_R1 (0 * 8)
	#define EX_CR (1 * 8)
	#define EX_R10 (2 * 8)
	#define EX_R11 (3 * 8)
	#define EX_R14 (4 * 8)
	#define EX_R15 (5 * 8)

	/*
	* The TLB miss exception uses different slots.
	*
	* The bolted variant uses only the first six fields,
	* which in combination with pgd and kernel_pgd fits in
	* one 64-byte cache line.
	*/

	#define EX_TLB_R10 ( 0 * 8)
	#define EX_TLB_R11 ( 1 * 8)
	#define EX_TLB_R14 ( 2 * 8)
	#define EX_TLB_R15 ( 3 * 8)
	#define EX_TLB_R16 ( 4 * 8)
	#define EX_TLB_CR ( 5 * 8)
	#define EX_TLB_R12 ( 6 * 8)
	#define EX_TLB_R13 ( 7 * 8)
	#define EX_TLB_DEAR ( 8 * 8) /* Level 0 and 2 only */
	#define EX_TLB_ESR ( 9 * 8) /* Level 0 and 2 only */
	#define EX_TLB_SRR0 (10 * 8)
	#define EX_TLB_SRR1 (11 * 8)
	#define EX_TLB_R7 (12 * 8)
	#ifdef CONFIG_BOOK3E_MMU_TLB_STATS
	#define EX_TLB_R8 (13 * 8)
	#define EX_TLB_R9 (14 * 8)
	#define EX_TLB_LR (15 * 8)
	#define EX_TLB_SIZE (16 * 8)
	#else
	#define EX_TLB_SIZE (13 * 8)
	#endif

	#define START_EXCEPTION(label) \
	.globl exc_##label##_book3e; \
	exc_##label##_book3e:

	/* TLB miss exception prolog
	*
	* This prolog handles re-entrancy (up to 3 levels supported in the PACA
	* though we currently don't test for overflow). It provides you with a
	* re-entrancy safe working space of r10...r16 and CR with r12 being used
	* as the exception area pointer in the PACA for that level of re-entrancy
	* and r13 containing the PACA pointer.
	*
	* SRR0 and SRR1 are saved, but DEAR and ESR are not, since they don't apply
	* as-is for instruction exceptions. It's up to the actual exception code
	* to save them as well if required.
	*/
	#define TLB_MISS_PROLOG \
	mtspr SPRN_SPRG_TLB_SCRATCH,r12; \
	mfspr r12,SPRN_SPRG_TLB_EXFRAME; \
	std r10,EX_TLB_R10(r12); \
	mfcr r10; \
	std r11,EX_TLB_R11(r12); \
	mfspr r11,SPRN_SPRG_TLB_SCRATCH; \
	std r13,EX_TLB_R13(r12); \
	mfspr r13,SPRN_SPRG_PACA; \
	std r14,EX_TLB_R14(r12); \
	addi r14,r12,EX_TLB_SIZE; \
	std r15,EX_TLB_R15(r12); \
	mfspr r15,SPRN_SRR1; \
	std r16,EX_TLB_R16(r12); \
	mfspr r16,SPRN_SRR0; \
	std r10,EX_TLB_CR(r12); \
	std r11,EX_TLB_R12(r12); \
	mtspr SPRN_SPRG_TLB_EXFRAME,r14; \
	std r15,EX_TLB_SRR1(r12); \
	std r16,EX_TLB_SRR0(r12); \
	TLB_MISS_PROLOG_STATS

	/* And these are the matching epilogs that restores things
	*
	* There are 3 epilogs:
	*
	* - SUCCESS : Unwinds one level
	* - ERROR : restore from level 0 and reset
	* - ERROR_SPECIAL : restore from current level and reset
	*
	* Normal errors use ERROR, that is, they restore the initial fault context
	* and trigger a fault. However, there is a special case for linear mapping
	* errors. Those should basically never happen, but if they do happen, we
	* want the error to point out the context that did that linear mapping
	* fault, not the initial level 0 (basically, we got a bogus PGF or something
	* like that). For userland errors on the linear mapping, there is no
	* difference since those are always level 0 anyway
	*/

	#define TLB_MISS_RESTORE(freg) \
	ld r14,EX_TLB_CR(r12); \
	ld r10,EX_TLB_R10(r12); \
	ld r15,EX_TLB_SRR0(r12); \
	ld r16,EX_TLB_SRR1(r12); \
	mtspr SPRN_SPRG_TLB_EXFRAME,freg; \
	ld r11,EX_TLB_R11(r12); \
	mtcr r14; \
	ld r13,EX_TLB_R13(r12); \
	ld r14,EX_TLB_R14(r12); \
	mtspr SPRN_SRR0,r15; \
	ld r15,EX_TLB_R15(r12); \
	mtspr SPRN_SRR1,r16; \
	TLB_MISS_RESTORE_STATS \
	ld r16,EX_TLB_R16(r12); \
	ld r12,EX_TLB_R12(r12); \

	#define TLB_MISS_EPILOG_SUCCESS \
	TLB_MISS_RESTORE(r12)

	#define TLB_MISS_EPILOG_ERROR \
	addi r12,r13,PACA_EXTLB; \
	TLB_MISS_RESTORE(r12)

	#define TLB_MISS_EPILOG_ERROR_SPECIAL \
	addi r11,r13,PACA_EXTLB; \
	TLB_MISS_RESTORE(r11)

	#ifdef CONFIG_BOOK3E_MMU_TLB_STATS
	#define TLB_MISS_PROLOG_STATS \
	mflr r10; \
	std r8,EX_TLB_R8(r12); \
	std r9,EX_TLB_R9(r12); \
	std r10,EX_TLB_LR(r12);
	#define TLB_MISS_RESTORE_STATS \
	ld r16,EX_TLB_LR(r12); \
	ld r9,EX_TLB_R9(r12); \
	ld r8,EX_TLB_R8(r12); \
	mtlr r16;
	#define TLB_MISS_STATS_D(name) \
	addi r9,r13,MMSTAT_DSTATS+name; \
	bl tlb_stat_inc;
	#define TLB_MISS_STATS_I(name) \
	addi r9,r13,MMSTAT_ISTATS+name; \
	bl tlb_stat_inc;
	#define TLB_MISS_STATS_X(name) \
	ld r8,PACA_EXTLB+EX_TLB_ESR(r13); \
	cmpdi cr2,r8,-1; \
	beq cr2,61f; \
	addi r9,r13,MMSTAT_DSTATS+name; \
	b 62f; \
	61: addi r9,r13,MMSTAT_ISTATS+name; \
	62: bl tlb_stat_inc;
	#define TLB_MISS_STATS_SAVE_INFO \
	std r14,EX_TLB_ESR(r12); /* save ESR */
	#define TLB_MISS_STATS_SAVE_INFO_BOLTED \
	std r14,PACA_EXTLB+EX_TLB_ESR(r13); /* save ESR */
	#else
	#define TLB_MISS_PROLOG_STATS
	#define TLB_MISS_RESTORE_STATS
	#define TLB_MISS_PROLOG_STATS_BOLTED
	#define TLB_MISS_RESTORE_STATS_BOLTED
	#define TLB_MISS_STATS_D(name)
	#define TLB_MISS_STATS_I(name)
	#define TLB_MISS_STATS_X(name)
	#define TLB_MISS_STATS_Y(name)
	#define TLB_MISS_STATS_SAVE_INFO
	#define TLB_MISS_STATS_SAVE_INFO_BOLTED
	#endif

	#define SET_IVOR(vector_number, vector_offset) \
	LOAD_REG_ADDR(r3,interrupt_base_book3e);\
	ori r3,r3,vector_offset@l; \
	mtspr SPRN_IVOR##vector_number,r3;

	#define RFI_TO_KERNEL \
	rfi

	#define RFI_TO_USER \
	rfi

	#endif /* _ASM_POWERPC_EXCEPTION_64E_H */