| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * clk-si5351.c: Skyworks / Silicon Labs Si5351A/B/C I2C Clock Generator |
| * |
| * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> |
| * Rabeeh Khoury <rabeeh@solid-run.com> |
| * |
| * References: |
| * [1] "Si5351A/B/C Data Sheet" |
| * https://www.skyworksinc.com/-/media/Skyworks/SL/documents/public/data-sheets/Si5351-B.pdf |
| * [2] "AN619: Manually Generating an Si5351 Register Map" |
| * https://www.skyworksinc.com/-/media/Skyworks/SL/documents/public/application-notes/AN619.pdf |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/clk.h> |
| #include <linux/clk-provider.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/errno.h> |
| #include <linux/rational.h> |
| #include <linux/i2c.h> |
| #include <linux/of_platform.h> |
| #include <linux/platform_data/si5351.h> |
| #include <linux/regmap.h> |
| #include <linux/slab.h> |
| #include <linux/string.h> |
| #include <asm/div64.h> |
| |
| #include "clk-si5351.h" |
| |
| struct si5351_driver_data; |
| |
| struct si5351_parameters { |
| unsigned long p1; |
| unsigned long p2; |
| unsigned long p3; |
| int valid; |
| }; |
| |
| struct si5351_hw_data { |
| struct clk_hw hw; |
| struct si5351_driver_data *drvdata; |
| struct si5351_parameters params; |
| unsigned char num; |
| }; |
| |
| struct si5351_driver_data { |
| enum si5351_variant variant; |
| struct i2c_client *client; |
| struct regmap *regmap; |
| |
| struct clk *pxtal; |
| const char *pxtal_name; |
| struct clk_hw xtal; |
| struct clk *pclkin; |
| const char *pclkin_name; |
| struct clk_hw clkin; |
| |
| struct si5351_hw_data pll[2]; |
| struct si5351_hw_data *msynth; |
| struct si5351_hw_data *clkout; |
| size_t num_clkout; |
| }; |
| |
| static const char * const si5351_input_names[] = { |
| "xtal", "clkin" |
| }; |
| static const char * const si5351_pll_names[] = { |
| "si5351_plla", "si5351_pllb", "si5351_vxco" |
| }; |
| static const char * const si5351_msynth_names[] = { |
| "ms0", "ms1", "ms2", "ms3", "ms4", "ms5", "ms6", "ms7" |
| }; |
| static const char * const si5351_clkout_names[] = { |
| "clk0", "clk1", "clk2", "clk3", "clk4", "clk5", "clk6", "clk7" |
| }; |
| |
| /* |
| * Si5351 i2c regmap |
| */ |
| static inline u8 si5351_reg_read(struct si5351_driver_data *drvdata, u8 reg) |
| { |
| u32 val; |
| int ret; |
| |
| ret = regmap_read(drvdata->regmap, reg, &val); |
| if (ret) { |
| dev_err(&drvdata->client->dev, |
| "unable to read from reg%02x\n", reg); |
| return 0; |
| } |
| |
| return (u8)val; |
| } |
| |
| static inline int si5351_bulk_read(struct si5351_driver_data *drvdata, |
| u8 reg, u8 count, u8 *buf) |
| { |
| return regmap_bulk_read(drvdata->regmap, reg, buf, count); |
| } |
| |
| static inline int si5351_reg_write(struct si5351_driver_data *drvdata, |
| u8 reg, u8 val) |
| { |
| return regmap_write(drvdata->regmap, reg, val); |
| } |
| |
| static inline int si5351_bulk_write(struct si5351_driver_data *drvdata, |
| u8 reg, u8 count, const u8 *buf) |
| { |
| return regmap_raw_write(drvdata->regmap, reg, buf, count); |
| } |
| |
| static inline int si5351_set_bits(struct si5351_driver_data *drvdata, |
| u8 reg, u8 mask, u8 val) |
| { |
| return regmap_update_bits(drvdata->regmap, reg, mask, val); |
| } |
| |
| static inline u8 si5351_msynth_params_address(int num) |
| { |
| if (num > 5) |
| return SI5351_CLK6_PARAMETERS + (num - 6); |
| return SI5351_CLK0_PARAMETERS + (SI5351_PARAMETERS_LENGTH * num); |
| } |
| |
| static void si5351_read_parameters(struct si5351_driver_data *drvdata, |
| u8 reg, struct si5351_parameters *params) |
| { |
| u8 buf[SI5351_PARAMETERS_LENGTH]; |
| |
| switch (reg) { |
| case SI5351_CLK6_PARAMETERS: |
| case SI5351_CLK7_PARAMETERS: |
| buf[0] = si5351_reg_read(drvdata, reg); |
| params->p1 = buf[0]; |
| params->p2 = 0; |
| params->p3 = 1; |
| break; |
| default: |
| si5351_bulk_read(drvdata, reg, SI5351_PARAMETERS_LENGTH, buf); |
| params->p1 = ((buf[2] & 0x03) << 16) | (buf[3] << 8) | buf[4]; |
| params->p2 = ((buf[5] & 0x0f) << 16) | (buf[6] << 8) | buf[7]; |
| params->p3 = ((buf[5] & 0xf0) << 12) | (buf[0] << 8) | buf[1]; |
| } |
| params->valid = 1; |
| } |
| |
| static void si5351_write_parameters(struct si5351_driver_data *drvdata, |
| u8 reg, struct si5351_parameters *params) |
| { |
| u8 buf[SI5351_PARAMETERS_LENGTH]; |
| |
| switch (reg) { |
| case SI5351_CLK6_PARAMETERS: |
| case SI5351_CLK7_PARAMETERS: |
| buf[0] = params->p1 & 0xff; |
| si5351_reg_write(drvdata, reg, buf[0]); |
| break; |
| default: |
| buf[0] = ((params->p3 & 0x0ff00) >> 8) & 0xff; |
| buf[1] = params->p3 & 0xff; |
| /* save rdiv and divby4 */ |
| buf[2] = si5351_reg_read(drvdata, reg + 2) & ~0x03; |
| buf[2] |= ((params->p1 & 0x30000) >> 16) & 0x03; |
| buf[3] = ((params->p1 & 0x0ff00) >> 8) & 0xff; |
| buf[4] = params->p1 & 0xff; |
| buf[5] = ((params->p3 & 0xf0000) >> 12) | |
| ((params->p2 & 0xf0000) >> 16); |
| buf[6] = ((params->p2 & 0x0ff00) >> 8) & 0xff; |
| buf[7] = params->p2 & 0xff; |
| si5351_bulk_write(drvdata, reg, SI5351_PARAMETERS_LENGTH, buf); |
| } |
| } |
| |
| static bool si5351_regmap_is_volatile(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case SI5351_DEVICE_STATUS: |
| case SI5351_INTERRUPT_STATUS: |
| case SI5351_PLL_RESET: |
| return true; |
| } |
| return false; |
| } |
| |
| static bool si5351_regmap_is_writeable(struct device *dev, unsigned int reg) |
| { |
| /* reserved registers */ |
| if (reg >= 4 && reg <= 8) |
| return false; |
| if (reg >= 10 && reg <= 14) |
| return false; |
| if (reg >= 173 && reg <= 176) |
| return false; |
| if (reg >= 178 && reg <= 182) |
| return false; |
| /* read-only */ |
| if (reg == SI5351_DEVICE_STATUS) |
| return false; |
| return true; |
| } |
| |
| static const struct regmap_config si5351_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .cache_type = REGCACHE_RBTREE, |
| .max_register = 187, |
| .writeable_reg = si5351_regmap_is_writeable, |
| .volatile_reg = si5351_regmap_is_volatile, |
| }; |
| |
| /* |
| * Si5351 xtal clock input |
| */ |
| static int si5351_xtal_prepare(struct clk_hw *hw) |
| { |
| struct si5351_driver_data *drvdata = |
| container_of(hw, struct si5351_driver_data, xtal); |
| si5351_set_bits(drvdata, SI5351_FANOUT_ENABLE, |
| SI5351_XTAL_ENABLE, SI5351_XTAL_ENABLE); |
| return 0; |
| } |
| |
| static void si5351_xtal_unprepare(struct clk_hw *hw) |
| { |
| struct si5351_driver_data *drvdata = |
| container_of(hw, struct si5351_driver_data, xtal); |
| si5351_set_bits(drvdata, SI5351_FANOUT_ENABLE, |
| SI5351_XTAL_ENABLE, 0); |
| } |
| |
| static const struct clk_ops si5351_xtal_ops = { |
| .prepare = si5351_xtal_prepare, |
| .unprepare = si5351_xtal_unprepare, |
| }; |
| |
| /* |
| * Si5351 clkin clock input (Si5351C only) |
| */ |
| static int si5351_clkin_prepare(struct clk_hw *hw) |
| { |
| struct si5351_driver_data *drvdata = |
| container_of(hw, struct si5351_driver_data, clkin); |
| si5351_set_bits(drvdata, SI5351_FANOUT_ENABLE, |
| SI5351_CLKIN_ENABLE, SI5351_CLKIN_ENABLE); |
| return 0; |
| } |
| |
| static void si5351_clkin_unprepare(struct clk_hw *hw) |
| { |
| struct si5351_driver_data *drvdata = |
| container_of(hw, struct si5351_driver_data, clkin); |
| si5351_set_bits(drvdata, SI5351_FANOUT_ENABLE, |
| SI5351_CLKIN_ENABLE, 0); |
| } |
| |
| /* |
| * CMOS clock source constraints: |
| * The input frequency range of the PLL is 10Mhz to 40MHz. |
| * If CLKIN is >40MHz, the input divider must be used. |
| */ |
| static unsigned long si5351_clkin_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct si5351_driver_data *drvdata = |
| container_of(hw, struct si5351_driver_data, clkin); |
| unsigned long rate; |
| unsigned char idiv; |
| |
| rate = parent_rate; |
| if (parent_rate > 160000000) { |
| idiv = SI5351_CLKIN_DIV_8; |
| rate /= 8; |
| } else if (parent_rate > 80000000) { |
| idiv = SI5351_CLKIN_DIV_4; |
| rate /= 4; |
| } else if (parent_rate > 40000000) { |
| idiv = SI5351_CLKIN_DIV_2; |
| rate /= 2; |
| } else { |
| idiv = SI5351_CLKIN_DIV_1; |
| } |
| |
| si5351_set_bits(drvdata, SI5351_PLL_INPUT_SOURCE, |
| SI5351_CLKIN_DIV_MASK, idiv); |
| |
| dev_dbg(&drvdata->client->dev, "%s - clkin div = %d, rate = %lu\n", |
| __func__, (1 << (idiv >> 6)), rate); |
| |
| return rate; |
| } |
| |
| static const struct clk_ops si5351_clkin_ops = { |
| .prepare = si5351_clkin_prepare, |
| .unprepare = si5351_clkin_unprepare, |
| .recalc_rate = si5351_clkin_recalc_rate, |
| }; |
| |
| /* |
| * Si5351 vxco clock input (Si5351B only) |
| */ |
| |
| static int si5351_vxco_prepare(struct clk_hw *hw) |
| { |
| struct si5351_hw_data *hwdata = |
| container_of(hw, struct si5351_hw_data, hw); |
| |
| dev_warn(&hwdata->drvdata->client->dev, "VXCO currently unsupported\n"); |
| |
| return 0; |
| } |
| |
| static void si5351_vxco_unprepare(struct clk_hw *hw) |
| { |
| } |
| |
| static unsigned long si5351_vxco_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| return 0; |
| } |
| |
| static int si5351_vxco_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent) |
| { |
| return 0; |
| } |
| |
| static const struct clk_ops si5351_vxco_ops = { |
| .prepare = si5351_vxco_prepare, |
| .unprepare = si5351_vxco_unprepare, |
| .recalc_rate = si5351_vxco_recalc_rate, |
| .set_rate = si5351_vxco_set_rate, |
| }; |
| |
| /* |
| * Si5351 pll a/b |
| * |
| * Feedback Multisynth Divider Equations [2] |
| * |
| * fVCO = fIN * (a + b/c) |
| * |
| * with 15 + 0/1048575 <= (a + b/c) <= 90 + 0/1048575 and |
| * fIN = fXTAL or fIN = fCLKIN/CLKIN_DIV |
| * |
| * Feedback Multisynth Register Equations |
| * |
| * (1) MSNx_P1[17:0] = 128 * a + floor(128 * b/c) - 512 |
| * (2) MSNx_P2[19:0] = 128 * b - c * floor(128 * b/c) = (128*b) mod c |
| * (3) MSNx_P3[19:0] = c |
| * |
| * Transposing (2) yields: (4) floor(128 * b/c) = (128 * b / MSNx_P2)/c |
| * |
| * Using (4) on (1) yields: |
| * MSNx_P1 = 128 * a + (128 * b/MSNx_P2)/c - 512 |
| * MSNx_P1 + 512 + MSNx_P2/c = 128 * a + 128 * b/c |
| * |
| * a + b/c = (MSNx_P1 + MSNx_P2/MSNx_P3 + 512)/128 |
| * = (MSNx_P1*MSNx_P3 + MSNx_P2 + 512*MSNx_P3)/(128*MSNx_P3) |
| * |
| */ |
| static int _si5351_pll_reparent(struct si5351_driver_data *drvdata, |
| int num, enum si5351_pll_src parent) |
| { |
| u8 mask = (num == 0) ? SI5351_PLLA_SOURCE : SI5351_PLLB_SOURCE; |
| |
| if (parent == SI5351_PLL_SRC_DEFAULT) |
| return 0; |
| |
| if (num > 2) |
| return -EINVAL; |
| |
| if (drvdata->variant != SI5351_VARIANT_C && |
| parent != SI5351_PLL_SRC_XTAL) |
| return -EINVAL; |
| |
| si5351_set_bits(drvdata, SI5351_PLL_INPUT_SOURCE, mask, |
| (parent == SI5351_PLL_SRC_XTAL) ? 0 : mask); |
| return 0; |
| } |
| |
| static unsigned char si5351_pll_get_parent(struct clk_hw *hw) |
| { |
| struct si5351_hw_data *hwdata = |
| container_of(hw, struct si5351_hw_data, hw); |
| u8 mask = (hwdata->num == 0) ? SI5351_PLLA_SOURCE : SI5351_PLLB_SOURCE; |
| u8 val; |
| |
| val = si5351_reg_read(hwdata->drvdata, SI5351_PLL_INPUT_SOURCE); |
| |
| return (val & mask) ? 1 : 0; |
| } |
| |
| static int si5351_pll_set_parent(struct clk_hw *hw, u8 index) |
| { |
| struct si5351_hw_data *hwdata = |
| container_of(hw, struct si5351_hw_data, hw); |
| |
| if (hwdata->drvdata->variant != SI5351_VARIANT_C && |
| index > 0) |
| return -EPERM; |
| |
| if (index > 1) |
| return -EINVAL; |
| |
| return _si5351_pll_reparent(hwdata->drvdata, hwdata->num, |
| (index == 0) ? SI5351_PLL_SRC_XTAL : |
| SI5351_PLL_SRC_CLKIN); |
| } |
| |
| static unsigned long si5351_pll_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct si5351_hw_data *hwdata = |
| container_of(hw, struct si5351_hw_data, hw); |
| u8 reg = (hwdata->num == 0) ? SI5351_PLLA_PARAMETERS : |
| SI5351_PLLB_PARAMETERS; |
| unsigned long long rate; |
| |
| if (!hwdata->params.valid) |
| si5351_read_parameters(hwdata->drvdata, reg, &hwdata->params); |
| |
| if (hwdata->params.p3 == 0) |
| return parent_rate; |
| |
| /* fVCO = fIN * (P1*P3 + 512*P3 + P2)/(128*P3) */ |
| rate = hwdata->params.p1 * hwdata->params.p3; |
| rate += 512 * hwdata->params.p3; |
| rate += hwdata->params.p2; |
| rate *= parent_rate; |
| do_div(rate, 128 * hwdata->params.p3); |
| |
| dev_dbg(&hwdata->drvdata->client->dev, |
| "%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, parent_rate = %lu, rate = %lu\n", |
| __func__, clk_hw_get_name(hw), |
| hwdata->params.p1, hwdata->params.p2, hwdata->params.p3, |
| parent_rate, (unsigned long)rate); |
| |
| return (unsigned long)rate; |
| } |
| |
| static long si5351_pll_round_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *parent_rate) |
| { |
| struct si5351_hw_data *hwdata = |
| container_of(hw, struct si5351_hw_data, hw); |
| unsigned long rfrac, denom, a, b, c; |
| unsigned long long lltmp; |
| |
| if (rate < SI5351_PLL_VCO_MIN) |
| rate = SI5351_PLL_VCO_MIN; |
| if (rate > SI5351_PLL_VCO_MAX) |
| rate = SI5351_PLL_VCO_MAX; |
| |
| /* determine integer part of feedback equation */ |
| a = rate / *parent_rate; |
| |
| if (a < SI5351_PLL_A_MIN) |
| rate = *parent_rate * SI5351_PLL_A_MIN; |
| if (a > SI5351_PLL_A_MAX) |
| rate = *parent_rate * SI5351_PLL_A_MAX; |
| |
| /* find best approximation for b/c = fVCO mod fIN */ |
| denom = 1000 * 1000; |
| lltmp = rate % (*parent_rate); |
| lltmp *= denom; |
| do_div(lltmp, *parent_rate); |
| rfrac = (unsigned long)lltmp; |
| |
| b = 0; |
| c = 1; |
| if (rfrac) |
| rational_best_approximation(rfrac, denom, |
| SI5351_PLL_B_MAX, SI5351_PLL_C_MAX, &b, &c); |
| |
| /* calculate parameters */ |
| hwdata->params.p3 = c; |
| hwdata->params.p2 = (128 * b) % c; |
| hwdata->params.p1 = 128 * a; |
| hwdata->params.p1 += (128 * b / c); |
| hwdata->params.p1 -= 512; |
| |
| /* recalculate rate by fIN * (a + b/c) */ |
| lltmp = *parent_rate; |
| lltmp *= b; |
| do_div(lltmp, c); |
| |
| rate = (unsigned long)lltmp; |
| rate += *parent_rate * a; |
| |
| dev_dbg(&hwdata->drvdata->client->dev, |
| "%s - %s: a = %lu, b = %lu, c = %lu, parent_rate = %lu, rate = %lu\n", |
| __func__, clk_hw_get_name(hw), a, b, c, |
| *parent_rate, rate); |
| |
| return rate; |
| } |
| |
| static int si5351_pll_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct si5351_hw_data *hwdata = |
| container_of(hw, struct si5351_hw_data, hw); |
| u8 reg = (hwdata->num == 0) ? SI5351_PLLA_PARAMETERS : |
| SI5351_PLLB_PARAMETERS; |
| |
| /* write multisynth parameters */ |
| si5351_write_parameters(hwdata->drvdata, reg, &hwdata->params); |
| |
| /* plla/pllb ctrl is in clk6/clk7 ctrl registers */ |
| si5351_set_bits(hwdata->drvdata, SI5351_CLK6_CTRL + hwdata->num, |
| SI5351_CLK_INTEGER_MODE, |
| (hwdata->params.p2 == 0) ? SI5351_CLK_INTEGER_MODE : 0); |
| |
| /* Do a pll soft reset on the affected pll */ |
| si5351_reg_write(hwdata->drvdata, SI5351_PLL_RESET, |
| hwdata->num == 0 ? SI5351_PLL_RESET_A : |
| SI5351_PLL_RESET_B); |
| |
| dev_dbg(&hwdata->drvdata->client->dev, |
| "%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, parent_rate = %lu, rate = %lu\n", |
| __func__, clk_hw_get_name(hw), |
| hwdata->params.p1, hwdata->params.p2, hwdata->params.p3, |
| parent_rate, rate); |
| |
| return 0; |
| } |
| |
| static const struct clk_ops si5351_pll_ops = { |
| .set_parent = si5351_pll_set_parent, |
| .get_parent = si5351_pll_get_parent, |
| .recalc_rate = si5351_pll_recalc_rate, |
| .round_rate = si5351_pll_round_rate, |
| .set_rate = si5351_pll_set_rate, |
| }; |
| |
| /* |
| * Si5351 multisync divider |
| * |
| * for fOUT <= 150 MHz: |
| * |
| * fOUT = (fIN * (a + b/c)) / CLKOUTDIV |
| * |
| * with 6 + 0/1048575 <= (a + b/c) <= 1800 + 0/1048575 and |
| * fIN = fVCO0, fVCO1 |
| * |
| * Output Clock Multisynth Register Equations |
| * |
| * MSx_P1[17:0] = 128 * a + floor(128 * b/c) - 512 |
| * MSx_P2[19:0] = 128 * b - c * floor(128 * b/c) = (128*b) mod c |
| * MSx_P3[19:0] = c |
| * |
| * MS[6,7] are integer (P1) divide only, P1 = divide value, |
| * P2 and P3 are not applicable |
| * |
| * for 150MHz < fOUT <= 160MHz: |
| * |
| * MSx_P1 = 0, MSx_P2 = 0, MSx_P3 = 1, MSx_INT = 1, MSx_DIVBY4 = 11b |
| */ |
| static int _si5351_msynth_reparent(struct si5351_driver_data *drvdata, |
| int num, enum si5351_multisynth_src parent) |
| { |
| if (parent == SI5351_MULTISYNTH_SRC_DEFAULT) |
| return 0; |
| |
| if (num > 8) |
| return -EINVAL; |
| |
| si5351_set_bits(drvdata, SI5351_CLK0_CTRL + num, SI5351_CLK_PLL_SELECT, |
| (parent == SI5351_MULTISYNTH_SRC_VCO0) ? 0 : |
| SI5351_CLK_PLL_SELECT); |
| return 0; |
| } |
| |
| static unsigned char si5351_msynth_get_parent(struct clk_hw *hw) |
| { |
| struct si5351_hw_data *hwdata = |
| container_of(hw, struct si5351_hw_data, hw); |
| u8 val; |
| |
| val = si5351_reg_read(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num); |
| |
| return (val & SI5351_CLK_PLL_SELECT) ? 1 : 0; |
| } |
| |
| static int si5351_msynth_set_parent(struct clk_hw *hw, u8 index) |
| { |
| struct si5351_hw_data *hwdata = |
| container_of(hw, struct si5351_hw_data, hw); |
| |
| return _si5351_msynth_reparent(hwdata->drvdata, hwdata->num, |
| (index == 0) ? SI5351_MULTISYNTH_SRC_VCO0 : |
| SI5351_MULTISYNTH_SRC_VCO1); |
| } |
| |
| static unsigned long si5351_msynth_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct si5351_hw_data *hwdata = |
| container_of(hw, struct si5351_hw_data, hw); |
| u8 reg = si5351_msynth_params_address(hwdata->num); |
| unsigned long long rate; |
| unsigned long m; |
| |
| if (!hwdata->params.valid) |
| si5351_read_parameters(hwdata->drvdata, reg, &hwdata->params); |
| |
| /* |
| * multisync0-5: fOUT = (128 * P3 * fIN) / (P1*P3 + P2 + 512*P3) |
| * multisync6-7: fOUT = fIN / P1 |
| */ |
| rate = parent_rate; |
| if (hwdata->num > 5) { |
| m = hwdata->params.p1; |
| } else if (hwdata->params.p3 == 0) { |
| return parent_rate; |
| } else if ((si5351_reg_read(hwdata->drvdata, reg + 2) & |
| SI5351_OUTPUT_CLK_DIVBY4) == SI5351_OUTPUT_CLK_DIVBY4) { |
| m = 4; |
| } else { |
| rate *= 128 * hwdata->params.p3; |
| m = hwdata->params.p1 * hwdata->params.p3; |
| m += hwdata->params.p2; |
| m += 512 * hwdata->params.p3; |
| } |
| |
| if (m == 0) |
| return 0; |
| do_div(rate, m); |
| |
| dev_dbg(&hwdata->drvdata->client->dev, |
| "%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, m = %lu, parent_rate = %lu, rate = %lu\n", |
| __func__, clk_hw_get_name(hw), |
| hwdata->params.p1, hwdata->params.p2, hwdata->params.p3, |
| m, parent_rate, (unsigned long)rate); |
| |
| return (unsigned long)rate; |
| } |
| |
| static long si5351_msynth_round_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *parent_rate) |
| { |
| struct si5351_hw_data *hwdata = |
| container_of(hw, struct si5351_hw_data, hw); |
| unsigned long long lltmp; |
| unsigned long a, b, c; |
| int divby4; |
| |
| /* multisync6-7 can only handle freqencies < 150MHz */ |
| if (hwdata->num >= 6 && rate > SI5351_MULTISYNTH67_MAX_FREQ) |
| rate = SI5351_MULTISYNTH67_MAX_FREQ; |
| |
| /* multisync frequency is 1MHz .. 160MHz */ |
| if (rate > SI5351_MULTISYNTH_MAX_FREQ) |
| rate = SI5351_MULTISYNTH_MAX_FREQ; |
| if (rate < SI5351_MULTISYNTH_MIN_FREQ) |
| rate = SI5351_MULTISYNTH_MIN_FREQ; |
| |
| divby4 = 0; |
| if (rate > SI5351_MULTISYNTH_DIVBY4_FREQ) |
| divby4 = 1; |
| |
| /* multisync can set pll */ |
| if (clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) { |
| /* |
| * find largest integer divider for max |
| * vco frequency and given target rate |
| */ |
| if (divby4 == 0) { |
| lltmp = SI5351_PLL_VCO_MAX; |
| do_div(lltmp, rate); |
| a = (unsigned long)lltmp; |
| } else |
| a = 4; |
| |
| b = 0; |
| c = 1; |
| |
| *parent_rate = a * rate; |
| } else if (hwdata->num >= 6) { |
| /* determine the closest integer divider */ |
| a = DIV_ROUND_CLOSEST(*parent_rate, rate); |
| if (a < SI5351_MULTISYNTH_A_MIN) |
| a = SI5351_MULTISYNTH_A_MIN; |
| if (a > SI5351_MULTISYNTH67_A_MAX) |
| a = SI5351_MULTISYNTH67_A_MAX; |
| |
| b = 0; |
| c = 1; |
| } else { |
| unsigned long rfrac, denom; |
| |
| /* disable divby4 */ |
| if (divby4) { |
| rate = SI5351_MULTISYNTH_DIVBY4_FREQ; |
| divby4 = 0; |
| } |
| |
| /* determine integer part of divider equation */ |
| a = *parent_rate / rate; |
| if (a < SI5351_MULTISYNTH_A_MIN) |
| a = SI5351_MULTISYNTH_A_MIN; |
| if (a > SI5351_MULTISYNTH_A_MAX) |
| a = SI5351_MULTISYNTH_A_MAX; |
| |
| /* find best approximation for b/c = fVCO mod fOUT */ |
| denom = 1000 * 1000; |
| lltmp = (*parent_rate) % rate; |
| lltmp *= denom; |
| do_div(lltmp, rate); |
| rfrac = (unsigned long)lltmp; |
| |
| b = 0; |
| c = 1; |
| if (rfrac) |
| rational_best_approximation(rfrac, denom, |
| SI5351_MULTISYNTH_B_MAX, SI5351_MULTISYNTH_C_MAX, |
| &b, &c); |
| } |
| |
| /* recalculate rate by fOUT = fIN / (a + b/c) */ |
| lltmp = *parent_rate; |
| lltmp *= c; |
| do_div(lltmp, a * c + b); |
| rate = (unsigned long)lltmp; |
| |
| /* calculate parameters */ |
| if (divby4) { |
| hwdata->params.p3 = 1; |
| hwdata->params.p2 = 0; |
| hwdata->params.p1 = 0; |
| } else if (hwdata->num >= 6) { |
| hwdata->params.p3 = 0; |
| hwdata->params.p2 = 0; |
| hwdata->params.p1 = a; |
| } else { |
| hwdata->params.p3 = c; |
| hwdata->params.p2 = (128 * b) % c; |
| hwdata->params.p1 = 128 * a; |
| hwdata->params.p1 += (128 * b / c); |
| hwdata->params.p1 -= 512; |
| } |
| |
| dev_dbg(&hwdata->drvdata->client->dev, |
| "%s - %s: a = %lu, b = %lu, c = %lu, divby4 = %d, parent_rate = %lu, rate = %lu\n", |
| __func__, clk_hw_get_name(hw), a, b, c, divby4, |
| *parent_rate, rate); |
| |
| return rate; |
| } |
| |
| static int si5351_msynth_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct si5351_hw_data *hwdata = |
| container_of(hw, struct si5351_hw_data, hw); |
| u8 reg = si5351_msynth_params_address(hwdata->num); |
| int divby4 = 0; |
| |
| /* write multisynth parameters */ |
| si5351_write_parameters(hwdata->drvdata, reg, &hwdata->params); |
| |
| if (rate > SI5351_MULTISYNTH_DIVBY4_FREQ) |
| divby4 = 1; |
| |
| /* enable/disable integer mode and divby4 on multisynth0-5 */ |
| if (hwdata->num < 6) { |
| si5351_set_bits(hwdata->drvdata, reg + 2, |
| SI5351_OUTPUT_CLK_DIVBY4, |
| (divby4) ? SI5351_OUTPUT_CLK_DIVBY4 : 0); |
| si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num, |
| SI5351_CLK_INTEGER_MODE, |
| (hwdata->params.p2 == 0) ? SI5351_CLK_INTEGER_MODE : 0); |
| } |
| |
| dev_dbg(&hwdata->drvdata->client->dev, |
| "%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, divby4 = %d, parent_rate = %lu, rate = %lu\n", |
| __func__, clk_hw_get_name(hw), |
| hwdata->params.p1, hwdata->params.p2, hwdata->params.p3, |
| divby4, parent_rate, rate); |
| |
| return 0; |
| } |
| |
| static const struct clk_ops si5351_msynth_ops = { |
| .set_parent = si5351_msynth_set_parent, |
| .get_parent = si5351_msynth_get_parent, |
| .recalc_rate = si5351_msynth_recalc_rate, |
| .round_rate = si5351_msynth_round_rate, |
| .set_rate = si5351_msynth_set_rate, |
| }; |
| |
| /* |
| * Si5351 clkout divider |
| */ |
| static int _si5351_clkout_reparent(struct si5351_driver_data *drvdata, |
| int num, enum si5351_clkout_src parent) |
| { |
| u8 val; |
| |
| if (num > 8) |
| return -EINVAL; |
| |
| switch (parent) { |
| case SI5351_CLKOUT_SRC_MSYNTH_N: |
| val = SI5351_CLK_INPUT_MULTISYNTH_N; |
| break; |
| case SI5351_CLKOUT_SRC_MSYNTH_0_4: |
| /* clk0/clk4 can only connect to its own multisync */ |
| if (num == 0 || num == 4) |
| val = SI5351_CLK_INPUT_MULTISYNTH_N; |
| else |
| val = SI5351_CLK_INPUT_MULTISYNTH_0_4; |
| break; |
| case SI5351_CLKOUT_SRC_XTAL: |
| val = SI5351_CLK_INPUT_XTAL; |
| break; |
| case SI5351_CLKOUT_SRC_CLKIN: |
| if (drvdata->variant != SI5351_VARIANT_C) |
| return -EINVAL; |
| |
| val = SI5351_CLK_INPUT_CLKIN; |
| break; |
| default: |
| return 0; |
| } |
| |
| si5351_set_bits(drvdata, SI5351_CLK0_CTRL + num, |
| SI5351_CLK_INPUT_MASK, val); |
| return 0; |
| } |
| |
| static int _si5351_clkout_set_drive_strength( |
| struct si5351_driver_data *drvdata, int num, |
| enum si5351_drive_strength drive) |
| { |
| u8 mask; |
| |
| if (num > 8) |
| return -EINVAL; |
| |
| switch (drive) { |
| case SI5351_DRIVE_2MA: |
| mask = SI5351_CLK_DRIVE_STRENGTH_2MA; |
| break; |
| case SI5351_DRIVE_4MA: |
| mask = SI5351_CLK_DRIVE_STRENGTH_4MA; |
| break; |
| case SI5351_DRIVE_6MA: |
| mask = SI5351_CLK_DRIVE_STRENGTH_6MA; |
| break; |
| case SI5351_DRIVE_8MA: |
| mask = SI5351_CLK_DRIVE_STRENGTH_8MA; |
| break; |
| default: |
| return 0; |
| } |
| |
| si5351_set_bits(drvdata, SI5351_CLK0_CTRL + num, |
| SI5351_CLK_DRIVE_STRENGTH_MASK, mask); |
| return 0; |
| } |
| |
| static int _si5351_clkout_set_disable_state( |
| struct si5351_driver_data *drvdata, int num, |
| enum si5351_disable_state state) |
| { |
| u8 reg = (num < 4) ? SI5351_CLK3_0_DISABLE_STATE : |
| SI5351_CLK7_4_DISABLE_STATE; |
| u8 shift = (num < 4) ? (2 * num) : (2 * (num-4)); |
| u8 mask = SI5351_CLK_DISABLE_STATE_MASK << shift; |
| u8 val; |
| |
| if (num > 8) |
| return -EINVAL; |
| |
| switch (state) { |
| case SI5351_DISABLE_LOW: |
| val = SI5351_CLK_DISABLE_STATE_LOW; |
| break; |
| case SI5351_DISABLE_HIGH: |
| val = SI5351_CLK_DISABLE_STATE_HIGH; |
| break; |
| case SI5351_DISABLE_FLOATING: |
| val = SI5351_CLK_DISABLE_STATE_FLOAT; |
| break; |
| case SI5351_DISABLE_NEVER: |
| val = SI5351_CLK_DISABLE_STATE_NEVER; |
| break; |
| default: |
| return 0; |
| } |
| |
| si5351_set_bits(drvdata, reg, mask, val << shift); |
| |
| return 0; |
| } |
| |
| static void _si5351_clkout_reset_pll(struct si5351_driver_data *drvdata, int num) |
| { |
| u8 val = si5351_reg_read(drvdata, SI5351_CLK0_CTRL + num); |
| u8 mask = val & SI5351_CLK_PLL_SELECT ? SI5351_PLL_RESET_B : |
| SI5351_PLL_RESET_A; |
| unsigned int v; |
| int err; |
| |
| switch (val & SI5351_CLK_INPUT_MASK) { |
| case SI5351_CLK_INPUT_XTAL: |
| case SI5351_CLK_INPUT_CLKIN: |
| return; /* pll not used, no need to reset */ |
| } |
| |
| si5351_reg_write(drvdata, SI5351_PLL_RESET, mask); |
| |
| err = regmap_read_poll_timeout(drvdata->regmap, SI5351_PLL_RESET, v, |
| !(v & mask), 0, 20000); |
| if (err < 0) |
| dev_err(&drvdata->client->dev, "Reset bit didn't clear\n"); |
| |
| dev_dbg(&drvdata->client->dev, "%s - %s: pll = %d\n", |
| __func__, clk_hw_get_name(&drvdata->clkout[num].hw), |
| (val & SI5351_CLK_PLL_SELECT) ? 1 : 0); |
| } |
| |
| static int si5351_clkout_prepare(struct clk_hw *hw) |
| { |
| struct si5351_hw_data *hwdata = |
| container_of(hw, struct si5351_hw_data, hw); |
| struct si5351_platform_data *pdata = |
| hwdata->drvdata->client->dev.platform_data; |
| |
| si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num, |
| SI5351_CLK_POWERDOWN, 0); |
| |
| /* |
| * Do a pll soft reset on the parent pll -- needed to get a |
| * deterministic phase relationship between the output clocks. |
| */ |
| if (pdata->clkout[hwdata->num].pll_reset) |
| _si5351_clkout_reset_pll(hwdata->drvdata, hwdata->num); |
| |
| si5351_set_bits(hwdata->drvdata, SI5351_OUTPUT_ENABLE_CTRL, |
| (1 << hwdata->num), 0); |
| return 0; |
| } |
| |
| static void si5351_clkout_unprepare(struct clk_hw *hw) |
| { |
| struct si5351_hw_data *hwdata = |
| container_of(hw, struct si5351_hw_data, hw); |
| |
| si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num, |
| SI5351_CLK_POWERDOWN, SI5351_CLK_POWERDOWN); |
| si5351_set_bits(hwdata->drvdata, SI5351_OUTPUT_ENABLE_CTRL, |
| (1 << hwdata->num), (1 << hwdata->num)); |
| } |
| |
| static u8 si5351_clkout_get_parent(struct clk_hw *hw) |
| { |
| struct si5351_hw_data *hwdata = |
| container_of(hw, struct si5351_hw_data, hw); |
| int index = 0; |
| unsigned char val; |
| |
| val = si5351_reg_read(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num); |
| switch (val & SI5351_CLK_INPUT_MASK) { |
| case SI5351_CLK_INPUT_MULTISYNTH_N: |
| index = 0; |
| break; |
| case SI5351_CLK_INPUT_MULTISYNTH_0_4: |
| index = 1; |
| break; |
| case SI5351_CLK_INPUT_XTAL: |
| index = 2; |
| break; |
| case SI5351_CLK_INPUT_CLKIN: |
| index = 3; |
| break; |
| } |
| |
| return index; |
| } |
| |
| static int si5351_clkout_set_parent(struct clk_hw *hw, u8 index) |
| { |
| struct si5351_hw_data *hwdata = |
| container_of(hw, struct si5351_hw_data, hw); |
| enum si5351_clkout_src parent = SI5351_CLKOUT_SRC_DEFAULT; |
| |
| switch (index) { |
| case 0: |
| parent = SI5351_CLKOUT_SRC_MSYNTH_N; |
| break; |
| case 1: |
| parent = SI5351_CLKOUT_SRC_MSYNTH_0_4; |
| break; |
| case 2: |
| parent = SI5351_CLKOUT_SRC_XTAL; |
| break; |
| case 3: |
| parent = SI5351_CLKOUT_SRC_CLKIN; |
| break; |
| } |
| |
| return _si5351_clkout_reparent(hwdata->drvdata, hwdata->num, parent); |
| } |
| |
| static unsigned long si5351_clkout_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| struct si5351_hw_data *hwdata = |
| container_of(hw, struct si5351_hw_data, hw); |
| unsigned char reg; |
| unsigned char rdiv; |
| |
| if (hwdata->num <= 5) |
| reg = si5351_msynth_params_address(hwdata->num) + 2; |
| else |
| reg = SI5351_CLK6_7_OUTPUT_DIVIDER; |
| |
| rdiv = si5351_reg_read(hwdata->drvdata, reg); |
| if (hwdata->num == 6) { |
| rdiv &= SI5351_OUTPUT_CLK6_DIV_MASK; |
| } else { |
| rdiv &= SI5351_OUTPUT_CLK_DIV_MASK; |
| rdiv >>= SI5351_OUTPUT_CLK_DIV_SHIFT; |
| } |
| |
| return parent_rate >> rdiv; |
| } |
| |
| static long si5351_clkout_round_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *parent_rate) |
| { |
| struct si5351_hw_data *hwdata = |
| container_of(hw, struct si5351_hw_data, hw); |
| unsigned char rdiv; |
| |
| /* clkout6/7 can only handle output freqencies < 150MHz */ |
| if (hwdata->num >= 6 && rate > SI5351_CLKOUT67_MAX_FREQ) |
| rate = SI5351_CLKOUT67_MAX_FREQ; |
| |
| /* clkout freqency is 8kHz - 160MHz */ |
| if (rate > SI5351_CLKOUT_MAX_FREQ) |
| rate = SI5351_CLKOUT_MAX_FREQ; |
| if (rate < SI5351_CLKOUT_MIN_FREQ) |
| rate = SI5351_CLKOUT_MIN_FREQ; |
| |
| /* request frequency if multisync master */ |
| if (clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) { |
| /* use r divider for frequencies below 1MHz */ |
| rdiv = SI5351_OUTPUT_CLK_DIV_1; |
| while (rate < SI5351_MULTISYNTH_MIN_FREQ && |
| rdiv < SI5351_OUTPUT_CLK_DIV_128) { |
| rdiv += 1; |
| rate *= 2; |
| } |
| *parent_rate = rate; |
| } else { |
| unsigned long new_rate, new_err, err; |
| |
| /* round to closed rdiv */ |
| rdiv = SI5351_OUTPUT_CLK_DIV_1; |
| new_rate = *parent_rate; |
| err = abs(new_rate - rate); |
| do { |
| new_rate >>= 1; |
| new_err = abs(new_rate - rate); |
| if (new_err > err || rdiv == SI5351_OUTPUT_CLK_DIV_128) |
| break; |
| rdiv++; |
| err = new_err; |
| } while (1); |
| } |
| rate = *parent_rate >> rdiv; |
| |
| dev_dbg(&hwdata->drvdata->client->dev, |
| "%s - %s: rdiv = %u, parent_rate = %lu, rate = %lu\n", |
| __func__, clk_hw_get_name(hw), (1 << rdiv), |
| *parent_rate, rate); |
| |
| return rate; |
| } |
| |
| static int si5351_clkout_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| struct si5351_hw_data *hwdata = |
| container_of(hw, struct si5351_hw_data, hw); |
| unsigned long new_rate, new_err, err; |
| unsigned char rdiv; |
| |
| /* round to closed rdiv */ |
| rdiv = SI5351_OUTPUT_CLK_DIV_1; |
| new_rate = parent_rate; |
| err = abs(new_rate - rate); |
| do { |
| new_rate >>= 1; |
| new_err = abs(new_rate - rate); |
| if (new_err > err || rdiv == SI5351_OUTPUT_CLK_DIV_128) |
| break; |
| rdiv++; |
| err = new_err; |
| } while (1); |
| |
| /* write output divider */ |
| switch (hwdata->num) { |
| case 6: |
| si5351_set_bits(hwdata->drvdata, SI5351_CLK6_7_OUTPUT_DIVIDER, |
| SI5351_OUTPUT_CLK6_DIV_MASK, rdiv); |
| break; |
| case 7: |
| si5351_set_bits(hwdata->drvdata, SI5351_CLK6_7_OUTPUT_DIVIDER, |
| SI5351_OUTPUT_CLK_DIV_MASK, |
| rdiv << SI5351_OUTPUT_CLK_DIV_SHIFT); |
| break; |
| default: |
| si5351_set_bits(hwdata->drvdata, |
| si5351_msynth_params_address(hwdata->num) + 2, |
| SI5351_OUTPUT_CLK_DIV_MASK, |
| rdiv << SI5351_OUTPUT_CLK_DIV_SHIFT); |
| } |
| |
| /* powerup clkout */ |
| si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num, |
| SI5351_CLK_POWERDOWN, 0); |
| |
| dev_dbg(&hwdata->drvdata->client->dev, |
| "%s - %s: rdiv = %u, parent_rate = %lu, rate = %lu\n", |
| __func__, clk_hw_get_name(hw), (1 << rdiv), |
| parent_rate, rate); |
| |
| return 0; |
| } |
| |
| static const struct clk_ops si5351_clkout_ops = { |
| .prepare = si5351_clkout_prepare, |
| .unprepare = si5351_clkout_unprepare, |
| .set_parent = si5351_clkout_set_parent, |
| .get_parent = si5351_clkout_get_parent, |
| .recalc_rate = si5351_clkout_recalc_rate, |
| .round_rate = si5351_clkout_round_rate, |
| .set_rate = si5351_clkout_set_rate, |
| }; |
| |
| /* |
| * Si5351 i2c probe and DT |
| */ |
| #ifdef CONFIG_OF |
| static const struct of_device_id si5351_dt_ids[] = { |
| { .compatible = "silabs,si5351a", .data = (void *)SI5351_VARIANT_A, }, |
| { .compatible = "silabs,si5351a-msop", |
| .data = (void *)SI5351_VARIANT_A3, }, |
| { .compatible = "silabs,si5351b", .data = (void *)SI5351_VARIANT_B, }, |
| { .compatible = "silabs,si5351c", .data = (void *)SI5351_VARIANT_C, }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, si5351_dt_ids); |
| |
| static int si5351_dt_parse(struct i2c_client *client, |
| enum si5351_variant variant) |
| { |
| struct device_node *child, *np = client->dev.of_node; |
| struct si5351_platform_data *pdata; |
| struct property *prop; |
| const __be32 *p; |
| int num = 0; |
| u32 val; |
| |
| if (np == NULL) |
| return 0; |
| |
| pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL); |
| if (!pdata) |
| return -ENOMEM; |
| |
| /* |
| * property silabs,pll-source : <num src>, [<..>] |
| * allow to selectively set pll source |
| */ |
| of_property_for_each_u32(np, "silabs,pll-source", prop, p, num) { |
| if (num >= 2) { |
| dev_err(&client->dev, |
| "invalid pll %d on pll-source prop\n", num); |
| return -EINVAL; |
| } |
| |
| p = of_prop_next_u32(prop, p, &val); |
| if (!p) { |
| dev_err(&client->dev, |
| "missing pll-source for pll %d\n", num); |
| return -EINVAL; |
| } |
| |
| switch (val) { |
| case 0: |
| pdata->pll_src[num] = SI5351_PLL_SRC_XTAL; |
| break; |
| case 1: |
| if (variant != SI5351_VARIANT_C) { |
| dev_err(&client->dev, |
| "invalid parent %d for pll %d\n", |
| val, num); |
| return -EINVAL; |
| } |
| pdata->pll_src[num] = SI5351_PLL_SRC_CLKIN; |
| break; |
| default: |
| dev_err(&client->dev, |
| "invalid parent %d for pll %d\n", val, num); |
| return -EINVAL; |
| } |
| } |
| |
| /* per clkout properties */ |
| for_each_child_of_node(np, child) { |
| if (of_property_read_u32(child, "reg", &num)) { |
| dev_err(&client->dev, "missing reg property of %pOFn\n", |
| child); |
| goto put_child; |
| } |
| |
| if (num >= 8 || |
| (variant == SI5351_VARIANT_A3 && num >= 3)) { |
| dev_err(&client->dev, "invalid clkout %d\n", num); |
| goto put_child; |
| } |
| |
| if (!of_property_read_u32(child, "silabs,multisynth-source", |
| &val)) { |
| switch (val) { |
| case 0: |
| pdata->clkout[num].multisynth_src = |
| SI5351_MULTISYNTH_SRC_VCO0; |
| break; |
| case 1: |
| pdata->clkout[num].multisynth_src = |
| SI5351_MULTISYNTH_SRC_VCO1; |
| break; |
| default: |
| dev_err(&client->dev, |
| "invalid parent %d for multisynth %d\n", |
| val, num); |
| goto put_child; |
| } |
| } |
| |
| if (!of_property_read_u32(child, "silabs,clock-source", &val)) { |
| switch (val) { |
| case 0: |
| pdata->clkout[num].clkout_src = |
| SI5351_CLKOUT_SRC_MSYNTH_N; |
| break; |
| case 1: |
| pdata->clkout[num].clkout_src = |
| SI5351_CLKOUT_SRC_MSYNTH_0_4; |
| break; |
| case 2: |
| pdata->clkout[num].clkout_src = |
| SI5351_CLKOUT_SRC_XTAL; |
| break; |
| case 3: |
| if (variant != SI5351_VARIANT_C) { |
| dev_err(&client->dev, |
| "invalid parent %d for clkout %d\n", |
| val, num); |
| goto put_child; |
| } |
| pdata->clkout[num].clkout_src = |
| SI5351_CLKOUT_SRC_CLKIN; |
| break; |
| default: |
| dev_err(&client->dev, |
| "invalid parent %d for clkout %d\n", |
| val, num); |
| goto put_child; |
| } |
| } |
| |
| if (!of_property_read_u32(child, "silabs,drive-strength", |
| &val)) { |
| switch (val) { |
| case SI5351_DRIVE_2MA: |
| case SI5351_DRIVE_4MA: |
| case SI5351_DRIVE_6MA: |
| case SI5351_DRIVE_8MA: |
| pdata->clkout[num].drive = val; |
| break; |
| default: |
| dev_err(&client->dev, |
| "invalid drive strength %d for clkout %d\n", |
| val, num); |
| goto put_child; |
| } |
| } |
| |
| if (!of_property_read_u32(child, "silabs,disable-state", |
| &val)) { |
| switch (val) { |
| case 0: |
| pdata->clkout[num].disable_state = |
| SI5351_DISABLE_LOW; |
| break; |
| case 1: |
| pdata->clkout[num].disable_state = |
| SI5351_DISABLE_HIGH; |
| break; |
| case 2: |
| pdata->clkout[num].disable_state = |
| SI5351_DISABLE_FLOATING; |
| break; |
| case 3: |
| pdata->clkout[num].disable_state = |
| SI5351_DISABLE_NEVER; |
| break; |
| default: |
| dev_err(&client->dev, |
| "invalid disable state %d for clkout %d\n", |
| val, num); |
| goto put_child; |
| } |
| } |
| |
| if (!of_property_read_u32(child, "clock-frequency", &val)) |
| pdata->clkout[num].rate = val; |
| |
| pdata->clkout[num].pll_master = |
| of_property_read_bool(child, "silabs,pll-master"); |
| |
| pdata->clkout[num].pll_reset = |
| of_property_read_bool(child, "silabs,pll-reset"); |
| } |
| client->dev.platform_data = pdata; |
| |
| return 0; |
| put_child: |
| of_node_put(child); |
| return -EINVAL; |
| } |
| |
| static struct clk_hw * |
| si53351_of_clk_get(struct of_phandle_args *clkspec, void *data) |
| { |
| struct si5351_driver_data *drvdata = data; |
| unsigned int idx = clkspec->args[0]; |
| |
| if (idx >= drvdata->num_clkout) { |
| pr_err("%s: invalid index %u\n", __func__, idx); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| return &drvdata->clkout[idx].hw; |
| } |
| #else |
| static int si5351_dt_parse(struct i2c_client *client, enum si5351_variant variant) |
| { |
| return 0; |
| } |
| |
| static struct clk_hw * |
| si53351_of_clk_get(struct of_phandle_args *clkspec, void *data) |
| { |
| return NULL; |
| } |
| #endif /* CONFIG_OF */ |
| |
| static const struct i2c_device_id si5351_i2c_ids[] = { |
| { "si5351a", SI5351_VARIANT_A }, |
| { "si5351a-msop", SI5351_VARIANT_A3 }, |
| { "si5351b", SI5351_VARIANT_B }, |
| { "si5351c", SI5351_VARIANT_C }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, si5351_i2c_ids); |
| |
| static int si5351_i2c_probe(struct i2c_client *client) |
| { |
| const struct i2c_device_id *id = i2c_match_id(si5351_i2c_ids, client); |
| enum si5351_variant variant = (enum si5351_variant)id->driver_data; |
| struct si5351_platform_data *pdata; |
| struct si5351_driver_data *drvdata; |
| struct clk_init_data init; |
| const char *parent_names[4]; |
| u8 num_parents, num_clocks; |
| int ret, n; |
| |
| ret = si5351_dt_parse(client, variant); |
| if (ret) |
| return ret; |
| |
| pdata = client->dev.platform_data; |
| if (!pdata) |
| return -EINVAL; |
| |
| drvdata = devm_kzalloc(&client->dev, sizeof(*drvdata), GFP_KERNEL); |
| if (!drvdata) |
| return -ENOMEM; |
| |
| i2c_set_clientdata(client, drvdata); |
| drvdata->client = client; |
| drvdata->variant = variant; |
| drvdata->pxtal = devm_clk_get(&client->dev, "xtal"); |
| drvdata->pclkin = devm_clk_get(&client->dev, "clkin"); |
| |
| if (PTR_ERR(drvdata->pxtal) == -EPROBE_DEFER || |
| PTR_ERR(drvdata->pclkin) == -EPROBE_DEFER) |
| return -EPROBE_DEFER; |
| |
| /* |
| * Check for valid parent clock: VARIANT_A and VARIANT_B need XTAL, |
| * VARIANT_C can have CLKIN instead. |
| */ |
| if (IS_ERR(drvdata->pxtal) && |
| (drvdata->variant != SI5351_VARIANT_C || IS_ERR(drvdata->pclkin))) { |
| dev_err(&client->dev, "missing parent clock\n"); |
| return -EINVAL; |
| } |
| |
| drvdata->regmap = devm_regmap_init_i2c(client, &si5351_regmap_config); |
| if (IS_ERR(drvdata->regmap)) { |
| dev_err(&client->dev, "failed to allocate register map\n"); |
| return PTR_ERR(drvdata->regmap); |
| } |
| |
| /* Disable interrupts */ |
| si5351_reg_write(drvdata, SI5351_INTERRUPT_MASK, 0xf0); |
| /* Ensure pll select is on XTAL for Si5351A/B */ |
| if (drvdata->variant != SI5351_VARIANT_C) |
| si5351_set_bits(drvdata, SI5351_PLL_INPUT_SOURCE, |
| SI5351_PLLA_SOURCE | SI5351_PLLB_SOURCE, 0); |
| |
| /* setup clock configuration */ |
| for (n = 0; n < 2; n++) { |
| ret = _si5351_pll_reparent(drvdata, n, pdata->pll_src[n]); |
| if (ret) { |
| dev_err(&client->dev, |
| "failed to reparent pll %d to %d\n", |
| n, pdata->pll_src[n]); |
| return ret; |
| } |
| } |
| |
| for (n = 0; n < 8; n++) { |
| ret = _si5351_msynth_reparent(drvdata, n, |
| pdata->clkout[n].multisynth_src); |
| if (ret) { |
| dev_err(&client->dev, |
| "failed to reparent multisynth %d to %d\n", |
| n, pdata->clkout[n].multisynth_src); |
| return ret; |
| } |
| |
| ret = _si5351_clkout_reparent(drvdata, n, |
| pdata->clkout[n].clkout_src); |
| if (ret) { |
| dev_err(&client->dev, |
| "failed to reparent clkout %d to %d\n", |
| n, pdata->clkout[n].clkout_src); |
| return ret; |
| } |
| |
| ret = _si5351_clkout_set_drive_strength(drvdata, n, |
| pdata->clkout[n].drive); |
| if (ret) { |
| dev_err(&client->dev, |
| "failed set drive strength of clkout%d to %d\n", |
| n, pdata->clkout[n].drive); |
| return ret; |
| } |
| |
| ret = _si5351_clkout_set_disable_state(drvdata, n, |
| pdata->clkout[n].disable_state); |
| if (ret) { |
| dev_err(&client->dev, |
| "failed set disable state of clkout%d to %d\n", |
| n, pdata->clkout[n].disable_state); |
| return ret; |
| } |
| } |
| |
| /* register xtal input clock gate */ |
| memset(&init, 0, sizeof(init)); |
| init.name = si5351_input_names[0]; |
| init.ops = &si5351_xtal_ops; |
| init.flags = 0; |
| if (!IS_ERR(drvdata->pxtal)) { |
| drvdata->pxtal_name = __clk_get_name(drvdata->pxtal); |
| init.parent_names = &drvdata->pxtal_name; |
| init.num_parents = 1; |
| } |
| drvdata->xtal.init = &init; |
| ret = devm_clk_hw_register(&client->dev, &drvdata->xtal); |
| if (ret) { |
| dev_err(&client->dev, "unable to register %s\n", init.name); |
| return ret; |
| } |
| |
| /* register clkin input clock gate */ |
| if (drvdata->variant == SI5351_VARIANT_C) { |
| memset(&init, 0, sizeof(init)); |
| init.name = si5351_input_names[1]; |
| init.ops = &si5351_clkin_ops; |
| if (!IS_ERR(drvdata->pclkin)) { |
| drvdata->pclkin_name = __clk_get_name(drvdata->pclkin); |
| init.parent_names = &drvdata->pclkin_name; |
| init.num_parents = 1; |
| } |
| drvdata->clkin.init = &init; |
| ret = devm_clk_hw_register(&client->dev, &drvdata->clkin); |
| if (ret) { |
| dev_err(&client->dev, "unable to register %s\n", |
| init.name); |
| return ret; |
| } |
| } |
| |
| /* Si5351C allows to mux either xtal or clkin to PLL input */ |
| num_parents = (drvdata->variant == SI5351_VARIANT_C) ? 2 : 1; |
| parent_names[0] = si5351_input_names[0]; |
| parent_names[1] = si5351_input_names[1]; |
| |
| /* register PLLA */ |
| drvdata->pll[0].num = 0; |
| drvdata->pll[0].drvdata = drvdata; |
| drvdata->pll[0].hw.init = &init; |
| memset(&init, 0, sizeof(init)); |
| init.name = si5351_pll_names[0]; |
| init.ops = &si5351_pll_ops; |
| init.flags = 0; |
| init.parent_names = parent_names; |
| init.num_parents = num_parents; |
| ret = devm_clk_hw_register(&client->dev, &drvdata->pll[0].hw); |
| if (ret) { |
| dev_err(&client->dev, "unable to register %s\n", init.name); |
| return ret; |
| } |
| |
| /* register PLLB or VXCO (Si5351B) */ |
| drvdata->pll[1].num = 1; |
| drvdata->pll[1].drvdata = drvdata; |
| drvdata->pll[1].hw.init = &init; |
| memset(&init, 0, sizeof(init)); |
| if (drvdata->variant == SI5351_VARIANT_B) { |
| init.name = si5351_pll_names[2]; |
| init.ops = &si5351_vxco_ops; |
| init.flags = 0; |
| init.parent_names = NULL; |
| init.num_parents = 0; |
| } else { |
| init.name = si5351_pll_names[1]; |
| init.ops = &si5351_pll_ops; |
| init.flags = 0; |
| init.parent_names = parent_names; |
| init.num_parents = num_parents; |
| } |
| ret = devm_clk_hw_register(&client->dev, &drvdata->pll[1].hw); |
| if (ret) { |
| dev_err(&client->dev, "unable to register %s\n", init.name); |
| return ret; |
| } |
| |
| /* register clk multisync and clk out divider */ |
| num_clocks = (drvdata->variant == SI5351_VARIANT_A3) ? 3 : 8; |
| parent_names[0] = si5351_pll_names[0]; |
| if (drvdata->variant == SI5351_VARIANT_B) |
| parent_names[1] = si5351_pll_names[2]; |
| else |
| parent_names[1] = si5351_pll_names[1]; |
| |
| drvdata->msynth = devm_kcalloc(&client->dev, num_clocks, |
| sizeof(*drvdata->msynth), GFP_KERNEL); |
| drvdata->clkout = devm_kcalloc(&client->dev, num_clocks, |
| sizeof(*drvdata->clkout), GFP_KERNEL); |
| drvdata->num_clkout = num_clocks; |
| |
| if (WARN_ON(!drvdata->msynth || !drvdata->clkout)) { |
| ret = -ENOMEM; |
| return ret; |
| } |
| |
| for (n = 0; n < num_clocks; n++) { |
| drvdata->msynth[n].num = n; |
| drvdata->msynth[n].drvdata = drvdata; |
| drvdata->msynth[n].hw.init = &init; |
| memset(&init, 0, sizeof(init)); |
| init.name = si5351_msynth_names[n]; |
| init.ops = &si5351_msynth_ops; |
| init.flags = 0; |
| if (pdata->clkout[n].pll_master) |
| init.flags |= CLK_SET_RATE_PARENT; |
| init.parent_names = parent_names; |
| init.num_parents = 2; |
| ret = devm_clk_hw_register(&client->dev, |
| &drvdata->msynth[n].hw); |
| if (ret) { |
| dev_err(&client->dev, "unable to register %s\n", |
| init.name); |
| return ret; |
| } |
| } |
| |
| num_parents = (drvdata->variant == SI5351_VARIANT_C) ? 4 : 3; |
| parent_names[2] = si5351_input_names[0]; |
| parent_names[3] = si5351_input_names[1]; |
| for (n = 0; n < num_clocks; n++) { |
| parent_names[0] = si5351_msynth_names[n]; |
| parent_names[1] = (n < 4) ? si5351_msynth_names[0] : |
| si5351_msynth_names[4]; |
| |
| drvdata->clkout[n].num = n; |
| drvdata->clkout[n].drvdata = drvdata; |
| drvdata->clkout[n].hw.init = &init; |
| memset(&init, 0, sizeof(init)); |
| init.name = si5351_clkout_names[n]; |
| init.ops = &si5351_clkout_ops; |
| init.flags = 0; |
| if (pdata->clkout[n].clkout_src == SI5351_CLKOUT_SRC_MSYNTH_N) |
| init.flags |= CLK_SET_RATE_PARENT; |
| init.parent_names = parent_names; |
| init.num_parents = num_parents; |
| ret = devm_clk_hw_register(&client->dev, |
| &drvdata->clkout[n].hw); |
| if (ret) { |
| dev_err(&client->dev, "unable to register %s\n", |
| init.name); |
| return ret; |
| } |
| |
| /* set initial clkout rate */ |
| if (pdata->clkout[n].rate != 0) { |
| int ret; |
| ret = clk_set_rate(drvdata->clkout[n].hw.clk, |
| pdata->clkout[n].rate); |
| if (ret != 0) { |
| dev_err(&client->dev, "Cannot set rate : %d\n", |
| ret); |
| } |
| } |
| } |
| |
| ret = of_clk_add_hw_provider(client->dev.of_node, si53351_of_clk_get, |
| drvdata); |
| if (ret) { |
| dev_err(&client->dev, "unable to add clk provider\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void si5351_i2c_remove(struct i2c_client *client) |
| { |
| of_clk_del_provider(client->dev.of_node); |
| } |
| |
| static struct i2c_driver si5351_driver = { |
| .driver = { |
| .name = "si5351", |
| .of_match_table = of_match_ptr(si5351_dt_ids), |
| }, |
| .probe_new = si5351_i2c_probe, |
| .remove = si5351_i2c_remove, |
| .id_table = si5351_i2c_ids, |
| }; |
| module_i2c_driver(si5351_driver); |
| |
| MODULE_AUTHOR("Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com"); |
| MODULE_DESCRIPTION("Silicon Labs Si5351A/B/C clock generator driver"); |
| MODULE_LICENSE("GPL"); |