| /* |
| * ni6510 (am7990 'lance' chip) driver for Linux-net-3 |
| * BETAcode v0.71 (96/09/29) for 2.0.0 (or later) |
| * copyrights (c) 1994,1995,1996 by M.Hipp |
| * |
| * This driver can handle the old ni6510 board and the newer ni6510 |
| * EtherBlaster. (probably it also works with every full NE2100 |
| * compatible card) |
| * |
| * driver probes: io: 0x360,0x300,0x320,0x340 / dma: 3,5,6,7 |
| * |
| * This is an extension to the Linux operating system, and is covered by the |
| * same GNU General Public License that covers the Linux-kernel. |
| * |
| * comments/bugs/suggestions can be sent to: |
| * Michael Hipp |
| * email: hippm@informatik.uni-tuebingen.de |
| * |
| * sources: |
| * some things are from the 'ni6510-packet-driver for dos by Russ Nelson' |
| * and from the original drivers by D.Becker |
| * |
| * known problems: |
| * - on some PCI boards (including my own) the card/board/ISA-bridge has |
| * problems with bus master DMA. This results in lotsa overruns. |
| * It may help to '#define RCV_PARANOIA_CHECK' or try to #undef |
| * the XMT and RCV_VIA_SKB option .. this reduces driver performance. |
| * Or just play with your BIOS options to optimize ISA-DMA access. |
| * Maybe you also wanna play with the LOW_PERFORAMCE and MID_PERFORMANCE |
| * defines -> please report me your experience then |
| * - Harald reported for ASUS SP3G mainboards, that you should use |
| * the 'optimal settings' from the user's manual on page 3-12! |
| * |
| * credits: |
| * thanx to Jason Sullivan for sending me a ni6510 card! |
| * lot of debug runs with ASUS SP3G Boards (Intel Saturn) by Harald Koenig |
| * |
| * simple performance test: (486DX-33/Ni6510-EB receives from 486DX4-100/Ni6510-EB) |
| * average: FTP -> 8384421 bytes received in 8.5 seconds |
| * (no RCV_VIA_SKB,no XMT_VIA_SKB,PARANOIA_CHECK,4 XMIT BUFS, 8 RCV_BUFFS) |
| * peak: FTP -> 8384421 bytes received in 7.5 seconds |
| * (RCV_VIA_SKB,XMT_VIA_SKB,no PARANOIA_CHECK,1(!) XMIT BUF, 16 RCV BUFFS) |
| */ |
| |
| /* |
| * 99.Jun.8: added support for /proc/net/dev byte count for xosview (HK) |
| * 96.Sept.29: virt_to_bus stuff added for new memory modell |
| * 96.April.29: Added Harald Koenig's Patches (MH) |
| * 96.April.13: enhanced error handling .. more tests (MH) |
| * 96.April.5/6: a lot of performance tests. Got it stable now (hopefully) (MH) |
| * 96.April.1: (no joke ;) .. added EtherBlaster and Module support (MH) |
| * 96.Feb.19: fixed a few bugs .. cleanups .. tested for 1.3.66 (MH) |
| * hopefully no more 16MB limit |
| * |
| * 95.Nov.18: multicast tweaked (AC). |
| * |
| * 94.Aug.22: changes in xmit_intr (ack more than one xmitted-packet), ni65_send_packet (p->lock) (MH) |
| * |
| * 94.July.16: fixed bugs in recv_skb and skb-alloc stuff (MH) |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/errno.h> |
| #include <linux/ioport.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/init.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/module.h> |
| #include <linux/bitops.h> |
| |
| #include <asm/io.h> |
| #include <asm/dma.h> |
| |
| #include "ni65.h" |
| |
| /* |
| * the current setting allows an acceptable performance |
| * for 'RCV_PARANOIA_CHECK' read the 'known problems' part in |
| * the header of this file |
| * 'invert' the defines for max. performance. This may cause DMA problems |
| * on some boards (e.g on my ASUS SP3G) |
| */ |
| #undef XMT_VIA_SKB |
| #undef RCV_VIA_SKB |
| #define RCV_PARANOIA_CHECK |
| |
| #define MID_PERFORMANCE |
| |
| #if defined( LOW_PERFORMANCE ) |
| static int isa0=7,isa1=7,csr80=0x0c10; |
| #elif defined( MID_PERFORMANCE ) |
| static int isa0=5,isa1=5,csr80=0x2810; |
| #else /* high performance */ |
| static int isa0=4,isa1=4,csr80=0x0017; |
| #endif |
| |
| /* |
| * a few card/vendor specific defines |
| */ |
| #define NI65_ID0 0x00 |
| #define NI65_ID1 0x55 |
| #define NI65_EB_ID0 0x52 |
| #define NI65_EB_ID1 0x44 |
| #define NE2100_ID0 0x57 |
| #define NE2100_ID1 0x57 |
| |
| #define PORT p->cmdr_addr |
| |
| /* |
| * buffer configuration |
| */ |
| #if 1 |
| #define RMDNUM 16 |
| #define RMDNUMMASK 0x80000000 |
| #else |
| #define RMDNUM 8 |
| #define RMDNUMMASK 0x60000000 /* log2(RMDNUM)<<29 */ |
| #endif |
| |
| #if 0 |
| #define TMDNUM 1 |
| #define TMDNUMMASK 0x00000000 |
| #else |
| #define TMDNUM 4 |
| #define TMDNUMMASK 0x40000000 /* log2(TMDNUM)<<29 */ |
| #endif |
| |
| /* slightly oversized */ |
| #define R_BUF_SIZE 1544 |
| #define T_BUF_SIZE 1544 |
| |
| /* |
| * lance register defines |
| */ |
| #define L_DATAREG 0x00 |
| #define L_ADDRREG 0x02 |
| #define L_RESET 0x04 |
| #define L_CONFIG 0x05 |
| #define L_BUSIF 0x06 |
| |
| /* |
| * to access the lance/am7990-regs, you have to write |
| * reg-number into L_ADDRREG, then you can access it using L_DATAREG |
| */ |
| #define CSR0 0x00 |
| #define CSR1 0x01 |
| #define CSR2 0x02 |
| #define CSR3 0x03 |
| |
| #define INIT_RING_BEFORE_START 0x1 |
| #define FULL_RESET_ON_ERROR 0x2 |
| |
| #if 0 |
| #define writereg(val,reg) {outw(reg,PORT+L_ADDRREG);inw(PORT+L_ADDRREG); \ |
| outw(val,PORT+L_DATAREG);inw(PORT+L_DATAREG);} |
| #define readreg(reg) (outw(reg,PORT+L_ADDRREG),inw(PORT+L_ADDRREG),\ |
| inw(PORT+L_DATAREG)) |
| #if 0 |
| #define writedatareg(val) {outw(val,PORT+L_DATAREG);inw(PORT+L_DATAREG);} |
| #else |
| #define writedatareg(val) { writereg(val,CSR0); } |
| #endif |
| #else |
| #define writereg(val,reg) {outw(reg,PORT+L_ADDRREG);outw(val,PORT+L_DATAREG);} |
| #define readreg(reg) (outw(reg,PORT+L_ADDRREG),inw(PORT+L_DATAREG)) |
| #define writedatareg(val) { writereg(val,CSR0); } |
| #endif |
| |
| static unsigned char ni_vendor[] = { 0x02,0x07,0x01 }; |
| |
| static struct card { |
| unsigned char id0,id1; |
| short id_offset; |
| short total_size; |
| short cmd_offset; |
| short addr_offset; |
| unsigned char *vendor_id; |
| char *cardname; |
| unsigned long config; |
| } cards[] = { |
| { |
| .id0 = NI65_ID0, |
| .id1 = NI65_ID1, |
| .id_offset = 0x0e, |
| .total_size = 0x10, |
| .cmd_offset = 0x0, |
| .addr_offset = 0x8, |
| .vendor_id = ni_vendor, |
| .cardname = "ni6510", |
| .config = 0x1, |
| }, |
| { |
| .id0 = NI65_EB_ID0, |
| .id1 = NI65_EB_ID1, |
| .id_offset = 0x0e, |
| .total_size = 0x18, |
| .cmd_offset = 0x10, |
| .addr_offset = 0x0, |
| .vendor_id = ni_vendor, |
| .cardname = "ni6510 EtherBlaster", |
| .config = 0x2, |
| }, |
| { |
| .id0 = NE2100_ID0, |
| .id1 = NE2100_ID1, |
| .id_offset = 0x0e, |
| .total_size = 0x18, |
| .cmd_offset = 0x10, |
| .addr_offset = 0x0, |
| .vendor_id = NULL, |
| .cardname = "generic NE2100", |
| .config = 0x0, |
| }, |
| }; |
| #define NUM_CARDS 3 |
| |
| struct priv |
| { |
| struct rmd rmdhead[RMDNUM]; |
| struct tmd tmdhead[TMDNUM]; |
| struct init_block ib; |
| int rmdnum; |
| int tmdnum,tmdlast; |
| #ifdef RCV_VIA_SKB |
| struct sk_buff *recv_skb[RMDNUM]; |
| #else |
| void *recvbounce[RMDNUM]; |
| #endif |
| #ifdef XMT_VIA_SKB |
| struct sk_buff *tmd_skb[TMDNUM]; |
| #endif |
| void *tmdbounce[TMDNUM]; |
| int tmdbouncenum; |
| int lock,xmit_queued; |
| |
| void *self; |
| int cmdr_addr; |
| int cardno; |
| int features; |
| spinlock_t ring_lock; |
| }; |
| |
| static int ni65_probe1(struct net_device *dev,int); |
| static irqreturn_t ni65_interrupt(int irq, void * dev_id); |
| static void ni65_recv_intr(struct net_device *dev,int); |
| static void ni65_xmit_intr(struct net_device *dev,int); |
| static int ni65_open(struct net_device *dev); |
| static int ni65_lance_reinit(struct net_device *dev); |
| static void ni65_init_lance(struct priv *p,unsigned char*,int,int); |
| static netdev_tx_t ni65_send_packet(struct sk_buff *skb, |
| struct net_device *dev); |
| static void ni65_timeout(struct net_device *dev); |
| static int ni65_close(struct net_device *dev); |
| static int ni65_alloc_buffer(struct net_device *dev); |
| static void ni65_free_buffer(struct priv *p); |
| static void set_multicast_list(struct net_device *dev); |
| |
| static int irqtab[] __initdata = { 9,12,15,5 }; /* irq config-translate */ |
| static int dmatab[] __initdata = { 0,3,5,6,7 }; /* dma config-translate and autodetect */ |
| |
| static int debuglevel = 1; |
| |
| /* |
| * set 'performance' registers .. we must STOP lance for that |
| */ |
| static void ni65_set_performance(struct priv *p) |
| { |
| writereg(CSR0_STOP | CSR0_CLRALL,CSR0); /* STOP */ |
| |
| if( !(cards[p->cardno].config & 0x02) ) |
| return; |
| |
| outw(80,PORT+L_ADDRREG); |
| if(inw(PORT+L_ADDRREG) != 80) |
| return; |
| |
| writereg( (csr80 & 0x3fff) ,80); /* FIFO watermarks */ |
| outw(0,PORT+L_ADDRREG); |
| outw((short)isa0,PORT+L_BUSIF); /* write ISA 0: DMA_R : isa0 * 50ns */ |
| outw(1,PORT+L_ADDRREG); |
| outw((short)isa1,PORT+L_BUSIF); /* write ISA 1: DMA_W : isa1 * 50ns */ |
| |
| outw(CSR0,PORT+L_ADDRREG); /* switch back to CSR0 */ |
| } |
| |
| /* |
| * open interface (up) |
| */ |
| static int ni65_open(struct net_device *dev) |
| { |
| struct priv *p = dev->ml_priv; |
| int irqval = request_irq(dev->irq, ni65_interrupt,0, |
| cards[p->cardno].cardname,dev); |
| if (irqval) { |
| printk(KERN_ERR "%s: unable to get IRQ %d (irqval=%d).\n", |
| dev->name,dev->irq, irqval); |
| return -EAGAIN; |
| } |
| |
| if(ni65_lance_reinit(dev)) |
| { |
| netif_start_queue(dev); |
| return 0; |
| } |
| else |
| { |
| free_irq(dev->irq,dev); |
| return -EAGAIN; |
| } |
| } |
| |
| /* |
| * close interface (down) |
| */ |
| static int ni65_close(struct net_device *dev) |
| { |
| struct priv *p = dev->ml_priv; |
| |
| netif_stop_queue(dev); |
| |
| outw(inw(PORT+L_RESET),PORT+L_RESET); /* that's the hard way */ |
| |
| #ifdef XMT_VIA_SKB |
| { |
| int i; |
| for(i=0;i<TMDNUM;i++) |
| { |
| if(p->tmd_skb[i]) { |
| dev_kfree_skb(p->tmd_skb[i]); |
| p->tmd_skb[i] = NULL; |
| } |
| } |
| } |
| #endif |
| free_irq(dev->irq,dev); |
| return 0; |
| } |
| |
| static void cleanup_card(struct net_device *dev) |
| { |
| struct priv *p = dev->ml_priv; |
| disable_dma(dev->dma); |
| free_dma(dev->dma); |
| release_region(dev->base_addr, cards[p->cardno].total_size); |
| ni65_free_buffer(p); |
| } |
| |
| /* set: io,irq,dma or set it when calling insmod */ |
| static int irq; |
| static int io; |
| static int dma; |
| |
| /* |
| * Probe The Card (not the lance-chip) |
| */ |
| struct net_device * __init ni65_probe(int unit) |
| { |
| struct net_device *dev = alloc_etherdev(0); |
| static const int ports[] = { 0x360, 0x300, 0x320, 0x340, 0 }; |
| const int *port; |
| int err = 0; |
| |
| if (!dev) |
| return ERR_PTR(-ENOMEM); |
| |
| if (unit >= 0) { |
| sprintf(dev->name, "eth%d", unit); |
| netdev_boot_setup_check(dev); |
| irq = dev->irq; |
| dma = dev->dma; |
| } else { |
| dev->base_addr = io; |
| } |
| |
| if (dev->base_addr > 0x1ff) { /* Check a single specified location. */ |
| err = ni65_probe1(dev, dev->base_addr); |
| } else if (dev->base_addr > 0) { /* Don't probe at all. */ |
| err = -ENXIO; |
| } else { |
| for (port = ports; *port && ni65_probe1(dev, *port); port++) |
| ; |
| if (!*port) |
| err = -ENODEV; |
| } |
| if (err) |
| goto out; |
| |
| err = register_netdev(dev); |
| if (err) |
| goto out1; |
| return dev; |
| out1: |
| cleanup_card(dev); |
| out: |
| free_netdev(dev); |
| return ERR_PTR(err); |
| } |
| |
| static const struct net_device_ops ni65_netdev_ops = { |
| .ndo_open = ni65_open, |
| .ndo_stop = ni65_close, |
| .ndo_start_xmit = ni65_send_packet, |
| .ndo_tx_timeout = ni65_timeout, |
| .ndo_set_rx_mode = set_multicast_list, |
| .ndo_set_mac_address = eth_mac_addr, |
| .ndo_validate_addr = eth_validate_addr, |
| }; |
| |
| /* |
| * this is the real card probe .. |
| */ |
| static int __init ni65_probe1(struct net_device *dev,int ioaddr) |
| { |
| int i,j; |
| struct priv *p; |
| unsigned long flags; |
| |
| dev->irq = irq; |
| dev->dma = dma; |
| |
| for(i=0;i<NUM_CARDS;i++) { |
| if(!request_region(ioaddr, cards[i].total_size, cards[i].cardname)) |
| continue; |
| if(cards[i].id_offset >= 0) { |
| if(inb(ioaddr+cards[i].id_offset+0) != cards[i].id0 || |
| inb(ioaddr+cards[i].id_offset+1) != cards[i].id1) { |
| release_region(ioaddr, cards[i].total_size); |
| continue; |
| } |
| } |
| if(cards[i].vendor_id) { |
| for(j=0;j<3;j++) |
| if(inb(ioaddr+cards[i].addr_offset+j) != cards[i].vendor_id[j]) { |
| release_region(ioaddr, cards[i].total_size); |
| continue; |
| } |
| } |
| break; |
| } |
| if(i == NUM_CARDS) |
| return -ENODEV; |
| |
| for(j=0;j<6;j++) |
| dev->dev_addr[j] = inb(ioaddr+cards[i].addr_offset+j); |
| |
| if( (j=ni65_alloc_buffer(dev)) < 0) { |
| release_region(ioaddr, cards[i].total_size); |
| return j; |
| } |
| p = dev->ml_priv; |
| p->cmdr_addr = ioaddr + cards[i].cmd_offset; |
| p->cardno = i; |
| spin_lock_init(&p->ring_lock); |
| |
| printk(KERN_INFO "%s: %s found at %#3x, ", dev->name, cards[p->cardno].cardname , ioaddr); |
| |
| outw(inw(PORT+L_RESET),PORT+L_RESET); /* first: reset the card */ |
| if( (j=readreg(CSR0)) != 0x4) { |
| printk("failed.\n"); |
| printk(KERN_ERR "%s: Can't RESET card: %04x\n", dev->name, j); |
| ni65_free_buffer(p); |
| release_region(ioaddr, cards[p->cardno].total_size); |
| return -EAGAIN; |
| } |
| |
| outw(88,PORT+L_ADDRREG); |
| if(inw(PORT+L_ADDRREG) == 88) { |
| unsigned long v; |
| v = inw(PORT+L_DATAREG); |
| v <<= 16; |
| outw(89,PORT+L_ADDRREG); |
| v |= inw(PORT+L_DATAREG); |
| printk("Version %#08lx, ",v); |
| p->features = INIT_RING_BEFORE_START; |
| } |
| else { |
| printk("ancient LANCE, "); |
| p->features = 0x0; |
| } |
| |
| if(test_bit(0,&cards[i].config)) { |
| dev->irq = irqtab[(inw(ioaddr+L_CONFIG)>>2)&3]; |
| dev->dma = dmatab[inw(ioaddr+L_CONFIG)&3]; |
| printk("IRQ %d (from card), DMA %d (from card).\n",dev->irq,dev->dma); |
| } |
| else { |
| if(dev->dma == 0) { |
| /* 'stuck test' from lance.c */ |
| unsigned long dma_channels = |
| ((inb(DMA1_STAT_REG) >> 4) & 0x0f) |
| | (inb(DMA2_STAT_REG) & 0xf0); |
| for(i=1;i<5;i++) { |
| int dma = dmatab[i]; |
| if(test_bit(dma,&dma_channels) || request_dma(dma,"ni6510")) |
| continue; |
| |
| flags=claim_dma_lock(); |
| disable_dma(dma); |
| set_dma_mode(dma,DMA_MODE_CASCADE); |
| enable_dma(dma); |
| release_dma_lock(flags); |
| |
| ni65_init_lance(p,dev->dev_addr,0,0); /* trigger memory access */ |
| |
| flags=claim_dma_lock(); |
| disable_dma(dma); |
| free_dma(dma); |
| release_dma_lock(flags); |
| |
| if(readreg(CSR0) & CSR0_IDON) |
| break; |
| } |
| if(i == 5) { |
| printk("failed.\n"); |
| printk(KERN_ERR "%s: Can't detect DMA channel!\n", dev->name); |
| ni65_free_buffer(p); |
| release_region(ioaddr, cards[p->cardno].total_size); |
| return -EAGAIN; |
| } |
| dev->dma = dmatab[i]; |
| printk("DMA %d (autodetected), ",dev->dma); |
| } |
| else |
| printk("DMA %d (assigned), ",dev->dma); |
| |
| if(dev->irq < 2) |
| { |
| unsigned long irq_mask; |
| |
| ni65_init_lance(p,dev->dev_addr,0,0); |
| irq_mask = probe_irq_on(); |
| writereg(CSR0_INIT|CSR0_INEA,CSR0); /* trigger interrupt */ |
| msleep(20); |
| dev->irq = probe_irq_off(irq_mask); |
| if(!dev->irq) |
| { |
| printk("Failed to detect IRQ line!\n"); |
| ni65_free_buffer(p); |
| release_region(ioaddr, cards[p->cardno].total_size); |
| return -EAGAIN; |
| } |
| printk("IRQ %d (autodetected).\n",dev->irq); |
| } |
| else |
| printk("IRQ %d (assigned).\n",dev->irq); |
| } |
| |
| if(request_dma(dev->dma, cards[p->cardno].cardname ) != 0) |
| { |
| printk(KERN_ERR "%s: Can't request dma-channel %d\n",dev->name,(int) dev->dma); |
| ni65_free_buffer(p); |
| release_region(ioaddr, cards[p->cardno].total_size); |
| return -EAGAIN; |
| } |
| |
| dev->base_addr = ioaddr; |
| dev->netdev_ops = &ni65_netdev_ops; |
| dev->watchdog_timeo = HZ/2; |
| |
| return 0; /* everything is OK */ |
| } |
| |
| /* |
| * set lance register and trigger init |
| */ |
| static void ni65_init_lance(struct priv *p,unsigned char *daddr,int filter,int mode) |
| { |
| int i; |
| u32 pib; |
| |
| writereg(CSR0_CLRALL|CSR0_STOP,CSR0); |
| |
| for(i=0;i<6;i++) |
| p->ib.eaddr[i] = daddr[i]; |
| |
| for(i=0;i<8;i++) |
| p->ib.filter[i] = filter; |
| p->ib.mode = mode; |
| |
| p->ib.trp = (u32) isa_virt_to_bus(p->tmdhead) | TMDNUMMASK; |
| p->ib.rrp = (u32) isa_virt_to_bus(p->rmdhead) | RMDNUMMASK; |
| writereg(0,CSR3); /* busmaster/no word-swap */ |
| pib = (u32) isa_virt_to_bus(&p->ib); |
| writereg(pib & 0xffff,CSR1); |
| writereg(pib >> 16,CSR2); |
| |
| writereg(CSR0_INIT,CSR0); /* this changes L_ADDRREG to CSR0 */ |
| |
| for(i=0;i<32;i++) |
| { |
| mdelay(4); |
| if(inw(PORT+L_DATAREG) & (CSR0_IDON | CSR0_MERR) ) |
| break; /* init ok ? */ |
| } |
| } |
| |
| /* |
| * allocate memory area and check the 16MB border |
| */ |
| static void *ni65_alloc_mem(struct net_device *dev,char *what,int size,int type) |
| { |
| struct sk_buff *skb=NULL; |
| unsigned char *ptr; |
| void *ret; |
| |
| if(type) { |
| ret = skb = alloc_skb(2+16+size,GFP_KERNEL|GFP_DMA); |
| if(!skb) { |
| printk(KERN_WARNING "%s: unable to allocate %s memory.\n",dev->name,what); |
| return NULL; |
| } |
| skb_reserve(skb,2+16); |
| skb_put(skb,R_BUF_SIZE); /* grab the whole space .. (not necessary) */ |
| ptr = skb->data; |
| } |
| else { |
| ret = ptr = kmalloc(T_BUF_SIZE,GFP_KERNEL | GFP_DMA); |
| if(!ret) |
| return NULL; |
| } |
| if( (u32) virt_to_phys(ptr+size) > 0x1000000) { |
| printk(KERN_WARNING "%s: unable to allocate %s memory in lower 16MB!\n",dev->name,what); |
| if(type) |
| kfree_skb(skb); |
| else |
| kfree(ptr); |
| return NULL; |
| } |
| return ret; |
| } |
| |
| /* |
| * allocate all memory structures .. send/recv buffers etc ... |
| */ |
| static int ni65_alloc_buffer(struct net_device *dev) |
| { |
| unsigned char *ptr; |
| struct priv *p; |
| int i; |
| |
| /* |
| * we need 8-aligned memory .. |
| */ |
| ptr = ni65_alloc_mem(dev,"BUFFER",sizeof(struct priv)+8,0); |
| if(!ptr) |
| return -ENOMEM; |
| |
| p = dev->ml_priv = (struct priv *) (((unsigned long) ptr + 7) & ~0x7); |
| memset((char *)p, 0, sizeof(struct priv)); |
| p->self = ptr; |
| |
| for(i=0;i<TMDNUM;i++) |
| { |
| #ifdef XMT_VIA_SKB |
| p->tmd_skb[i] = NULL; |
| #endif |
| p->tmdbounce[i] = ni65_alloc_mem(dev,"XMIT",T_BUF_SIZE,0); |
| if(!p->tmdbounce[i]) { |
| ni65_free_buffer(p); |
| return -ENOMEM; |
| } |
| } |
| |
| for(i=0;i<RMDNUM;i++) |
| { |
| #ifdef RCV_VIA_SKB |
| p->recv_skb[i] = ni65_alloc_mem(dev,"RECV",R_BUF_SIZE,1); |
| if(!p->recv_skb[i]) { |
| ni65_free_buffer(p); |
| return -ENOMEM; |
| } |
| #else |
| p->recvbounce[i] = ni65_alloc_mem(dev,"RECV",R_BUF_SIZE,0); |
| if(!p->recvbounce[i]) { |
| ni65_free_buffer(p); |
| return -ENOMEM; |
| } |
| #endif |
| } |
| |
| return 0; /* everything is OK */ |
| } |
| |
| /* |
| * free buffers and private struct |
| */ |
| static void ni65_free_buffer(struct priv *p) |
| { |
| int i; |
| |
| if(!p) |
| return; |
| |
| for(i=0;i<TMDNUM;i++) { |
| kfree(p->tmdbounce[i]); |
| #ifdef XMT_VIA_SKB |
| if(p->tmd_skb[i]) |
| dev_kfree_skb(p->tmd_skb[i]); |
| #endif |
| } |
| |
| for(i=0;i<RMDNUM;i++) |
| { |
| #ifdef RCV_VIA_SKB |
| if(p->recv_skb[i]) |
| dev_kfree_skb(p->recv_skb[i]); |
| #else |
| kfree(p->recvbounce[i]); |
| #endif |
| } |
| kfree(p->self); |
| } |
| |
| |
| /* |
| * stop and (re)start lance .. e.g after an error |
| */ |
| static void ni65_stop_start(struct net_device *dev,struct priv *p) |
| { |
| int csr0 = CSR0_INEA; |
| |
| writedatareg(CSR0_STOP); |
| |
| if(debuglevel > 1) |
| printk(KERN_DEBUG "ni65_stop_start\n"); |
| |
| if(p->features & INIT_RING_BEFORE_START) { |
| int i; |
| #ifdef XMT_VIA_SKB |
| struct sk_buff *skb_save[TMDNUM]; |
| #endif |
| unsigned long buffer[TMDNUM]; |
| short blen[TMDNUM]; |
| |
| if(p->xmit_queued) { |
| while(1) { |
| if((p->tmdhead[p->tmdlast].u.s.status & XMIT_OWN)) |
| break; |
| p->tmdlast = (p->tmdlast + 1) & (TMDNUM-1); |
| if(p->tmdlast == p->tmdnum) |
| break; |
| } |
| } |
| |
| for(i=0;i<TMDNUM;i++) { |
| struct tmd *tmdp = p->tmdhead + i; |
| #ifdef XMT_VIA_SKB |
| skb_save[i] = p->tmd_skb[i]; |
| #endif |
| buffer[i] = (u32) isa_bus_to_virt(tmdp->u.buffer); |
| blen[i] = tmdp->blen; |
| tmdp->u.s.status = 0x0; |
| } |
| |
| for(i=0;i<RMDNUM;i++) { |
| struct rmd *rmdp = p->rmdhead + i; |
| rmdp->u.s.status = RCV_OWN; |
| } |
| p->tmdnum = p->xmit_queued = 0; |
| writedatareg(CSR0_STRT | csr0); |
| |
| for(i=0;i<TMDNUM;i++) { |
| int num = (i + p->tmdlast) & (TMDNUM-1); |
| p->tmdhead[i].u.buffer = (u32) isa_virt_to_bus((char *)buffer[num]); /* status is part of buffer field */ |
| p->tmdhead[i].blen = blen[num]; |
| if(p->tmdhead[i].u.s.status & XMIT_OWN) { |
| p->tmdnum = (p->tmdnum + 1) & (TMDNUM-1); |
| p->xmit_queued = 1; |
| writedatareg(CSR0_TDMD | CSR0_INEA | csr0); |
| } |
| #ifdef XMT_VIA_SKB |
| p->tmd_skb[i] = skb_save[num]; |
| #endif |
| } |
| p->rmdnum = p->tmdlast = 0; |
| if(!p->lock) |
| if (p->tmdnum || !p->xmit_queued) |
| netif_wake_queue(dev); |
| netif_trans_update(dev); /* prevent tx timeout */ |
| } |
| else |
| writedatareg(CSR0_STRT | csr0); |
| } |
| |
| /* |
| * init lance (write init-values .. init-buffers) (open-helper) |
| */ |
| static int ni65_lance_reinit(struct net_device *dev) |
| { |
| int i; |
| struct priv *p = dev->ml_priv; |
| unsigned long flags; |
| |
| p->lock = 0; |
| p->xmit_queued = 0; |
| |
| flags=claim_dma_lock(); |
| disable_dma(dev->dma); /* I've never worked with dma, but we do it like the packetdriver */ |
| set_dma_mode(dev->dma,DMA_MODE_CASCADE); |
| enable_dma(dev->dma); |
| release_dma_lock(flags); |
| |
| outw(inw(PORT+L_RESET),PORT+L_RESET); /* first: reset the card */ |
| if( (i=readreg(CSR0) ) != 0x4) |
| { |
| printk(KERN_ERR "%s: can't RESET %s card: %04x\n",dev->name, |
| cards[p->cardno].cardname,(int) i); |
| flags=claim_dma_lock(); |
| disable_dma(dev->dma); |
| release_dma_lock(flags); |
| return 0; |
| } |
| |
| p->rmdnum = p->tmdnum = p->tmdlast = p->tmdbouncenum = 0; |
| for(i=0;i<TMDNUM;i++) |
| { |
| struct tmd *tmdp = p->tmdhead + i; |
| #ifdef XMT_VIA_SKB |
| if(p->tmd_skb[i]) { |
| dev_kfree_skb(p->tmd_skb[i]); |
| p->tmd_skb[i] = NULL; |
| } |
| #endif |
| tmdp->u.buffer = 0x0; |
| tmdp->u.s.status = XMIT_START | XMIT_END; |
| tmdp->blen = tmdp->status2 = 0; |
| } |
| |
| for(i=0;i<RMDNUM;i++) |
| { |
| struct rmd *rmdp = p->rmdhead + i; |
| #ifdef RCV_VIA_SKB |
| rmdp->u.buffer = (u32) isa_virt_to_bus(p->recv_skb[i]->data); |
| #else |
| rmdp->u.buffer = (u32) isa_virt_to_bus(p->recvbounce[i]); |
| #endif |
| rmdp->blen = -(R_BUF_SIZE-8); |
| rmdp->mlen = 0; |
| rmdp->u.s.status = RCV_OWN; |
| } |
| |
| if(dev->flags & IFF_PROMISC) |
| ni65_init_lance(p,dev->dev_addr,0x00,M_PROM); |
| else if (netdev_mc_count(dev) || dev->flags & IFF_ALLMULTI) |
| ni65_init_lance(p,dev->dev_addr,0xff,0x0); |
| else |
| ni65_init_lance(p,dev->dev_addr,0x00,0x00); |
| |
| /* |
| * ni65_set_lance_mem() sets L_ADDRREG to CSR0 |
| * NOW, WE WILL NEVER CHANGE THE L_ADDRREG, CSR0 IS ALWAYS SELECTED |
| */ |
| |
| if(inw(PORT+L_DATAREG) & CSR0_IDON) { |
| ni65_set_performance(p); |
| /* init OK: start lance , enable interrupts */ |
| writedatareg(CSR0_CLRALL | CSR0_INEA | CSR0_STRT); |
| return 1; /* ->OK */ |
| } |
| printk(KERN_ERR "%s: can't init lance, status: %04x\n",dev->name,(int) inw(PORT+L_DATAREG)); |
| flags=claim_dma_lock(); |
| disable_dma(dev->dma); |
| release_dma_lock(flags); |
| return 0; /* ->Error */ |
| } |
| |
| /* |
| * interrupt handler |
| */ |
| static irqreturn_t ni65_interrupt(int irq, void * dev_id) |
| { |
| int csr0 = 0; |
| struct net_device *dev = dev_id; |
| struct priv *p; |
| int bcnt = 32; |
| |
| p = dev->ml_priv; |
| |
| spin_lock(&p->ring_lock); |
| |
| while(--bcnt) { |
| csr0 = inw(PORT+L_DATAREG); |
| |
| #if 0 |
| writedatareg( (csr0 & CSR0_CLRALL) ); /* ack interrupts, disable int. */ |
| #else |
| writedatareg( (csr0 & CSR0_CLRALL) | CSR0_INEA ); /* ack interrupts, interrupts enabled */ |
| #endif |
| |
| if(!(csr0 & (CSR0_ERR | CSR0_RINT | CSR0_TINT))) |
| break; |
| |
| if(csr0 & CSR0_RINT) /* RECV-int? */ |
| ni65_recv_intr(dev,csr0); |
| if(csr0 & CSR0_TINT) /* XMIT-int? */ |
| ni65_xmit_intr(dev,csr0); |
| |
| if(csr0 & CSR0_ERR) |
| { |
| if(debuglevel > 1) |
| printk(KERN_ERR "%s: general error: %04x.\n",dev->name,csr0); |
| if(csr0 & CSR0_BABL) |
| dev->stats.tx_errors++; |
| if(csr0 & CSR0_MISS) { |
| int i; |
| for(i=0;i<RMDNUM;i++) |
| printk("%02x ",p->rmdhead[i].u.s.status); |
| printk("\n"); |
| dev->stats.rx_errors++; |
| } |
| if(csr0 & CSR0_MERR) { |
| if(debuglevel > 1) |
| printk(KERN_ERR "%s: Ooops .. memory error: %04x.\n",dev->name,csr0); |
| ni65_stop_start(dev,p); |
| } |
| } |
| } |
| |
| #ifdef RCV_PARANOIA_CHECK |
| { |
| int j; |
| for(j=0;j<RMDNUM;j++) |
| { |
| int i, num2; |
| for(i=RMDNUM-1;i>0;i--) { |
| num2 = (p->rmdnum + i) & (RMDNUM-1); |
| if(!(p->rmdhead[num2].u.s.status & RCV_OWN)) |
| break; |
| } |
| |
| if(i) { |
| int k, num1; |
| for(k=0;k<RMDNUM;k++) { |
| num1 = (p->rmdnum + k) & (RMDNUM-1); |
| if(!(p->rmdhead[num1].u.s.status & RCV_OWN)) |
| break; |
| } |
| if(!k) |
| break; |
| |
| if(debuglevel > 0) |
| { |
| char buf[256],*buf1; |
| buf1 = buf; |
| for(k=0;k<RMDNUM;k++) { |
| sprintf(buf1,"%02x ",(p->rmdhead[k].u.s.status)); /* & RCV_OWN) ); */ |
| buf1 += 3; |
| } |
| *buf1 = 0; |
| printk(KERN_ERR "%s: Ooops, receive ring corrupted %2d %2d | %s\n",dev->name,p->rmdnum,i,buf); |
| } |
| |
| p->rmdnum = num1; |
| ni65_recv_intr(dev,csr0); |
| if((p->rmdhead[num2].u.s.status & RCV_OWN)) |
| break; /* ok, we are 'in sync' again */ |
| } |
| else |
| break; |
| } |
| } |
| #endif |
| |
| if( (csr0 & (CSR0_RXON | CSR0_TXON)) != (CSR0_RXON | CSR0_TXON) ) { |
| printk(KERN_DEBUG "%s: RX or TX was offline -> restart\n",dev->name); |
| ni65_stop_start(dev,p); |
| } |
| else |
| writedatareg(CSR0_INEA); |
| |
| spin_unlock(&p->ring_lock); |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * We have received an Xmit-Interrupt .. |
| * send a new packet if necessary |
| */ |
| static void ni65_xmit_intr(struct net_device *dev,int csr0) |
| { |
| struct priv *p = dev->ml_priv; |
| |
| while(p->xmit_queued) |
| { |
| struct tmd *tmdp = p->tmdhead + p->tmdlast; |
| int tmdstat = tmdp->u.s.status; |
| |
| if(tmdstat & XMIT_OWN) |
| break; |
| |
| if(tmdstat & XMIT_ERR) |
| { |
| #if 0 |
| if(tmdp->status2 & XMIT_TDRMASK && debuglevel > 3) |
| printk(KERN_ERR "%s: tdr-problems (e.g. no resistor)\n",dev->name); |
| #endif |
| /* checking some errors */ |
| if(tmdp->status2 & XMIT_RTRY) |
| dev->stats.tx_aborted_errors++; |
| if(tmdp->status2 & XMIT_LCAR) |
| dev->stats.tx_carrier_errors++; |
| if(tmdp->status2 & (XMIT_BUFF | XMIT_UFLO )) { |
| /* this stops the xmitter */ |
| dev->stats.tx_fifo_errors++; |
| if(debuglevel > 0) |
| printk(KERN_ERR "%s: Xmit FIFO/BUFF error\n",dev->name); |
| if(p->features & INIT_RING_BEFORE_START) { |
| tmdp->u.s.status = XMIT_OWN | XMIT_START | XMIT_END; /* test: resend this frame */ |
| ni65_stop_start(dev,p); |
| break; /* no more Xmit processing .. */ |
| } |
| else |
| ni65_stop_start(dev,p); |
| } |
| if(debuglevel > 2) |
| printk(KERN_ERR "%s: xmit-error: %04x %02x-%04x\n",dev->name,csr0,(int) tmdstat,(int) tmdp->status2); |
| if(!(csr0 & CSR0_BABL)) /* don't count errors twice */ |
| dev->stats.tx_errors++; |
| tmdp->status2 = 0; |
| } |
| else { |
| dev->stats.tx_bytes -= (short)(tmdp->blen); |
| dev->stats.tx_packets++; |
| } |
| |
| #ifdef XMT_VIA_SKB |
| if(p->tmd_skb[p->tmdlast]) { |
| dev_kfree_skb_irq(p->tmd_skb[p->tmdlast]); |
| p->tmd_skb[p->tmdlast] = NULL; |
| } |
| #endif |
| |
| p->tmdlast = (p->tmdlast + 1) & (TMDNUM-1); |
| if(p->tmdlast == p->tmdnum) |
| p->xmit_queued = 0; |
| } |
| netif_wake_queue(dev); |
| } |
| |
| /* |
| * We have received a packet |
| */ |
| static void ni65_recv_intr(struct net_device *dev,int csr0) |
| { |
| struct rmd *rmdp; |
| int rmdstat,len; |
| int cnt=0; |
| struct priv *p = dev->ml_priv; |
| |
| rmdp = p->rmdhead + p->rmdnum; |
| while(!( (rmdstat = rmdp->u.s.status) & RCV_OWN)) |
| { |
| cnt++; |
| if( (rmdstat & (RCV_START | RCV_END | RCV_ERR)) != (RCV_START | RCV_END) ) /* error or oversized? */ |
| { |
| if(!(rmdstat & RCV_ERR)) { |
| if(rmdstat & RCV_START) |
| { |
| dev->stats.rx_length_errors++; |
| printk(KERN_ERR "%s: recv, packet too long: %d\n",dev->name,rmdp->mlen & 0x0fff); |
| } |
| } |
| else { |
| if(debuglevel > 2) |
| printk(KERN_ERR "%s: receive-error: %04x, lance-status: %04x/%04x\n", |
| dev->name,(int) rmdstat,csr0,(int) inw(PORT+L_DATAREG) ); |
| if(rmdstat & RCV_FRAM) |
| dev->stats.rx_frame_errors++; |
| if(rmdstat & RCV_OFLO) |
| dev->stats.rx_over_errors++; |
| if(rmdstat & RCV_CRC) |
| dev->stats.rx_crc_errors++; |
| if(rmdstat & RCV_BUF_ERR) |
| dev->stats.rx_fifo_errors++; |
| } |
| if(!(csr0 & CSR0_MISS)) /* don't count errors twice */ |
| dev->stats.rx_errors++; |
| } |
| else if( (len = (rmdp->mlen & 0x0fff) - 4) >= 60) |
| { |
| #ifdef RCV_VIA_SKB |
| struct sk_buff *skb = alloc_skb(R_BUF_SIZE+2+16,GFP_ATOMIC); |
| if (skb) |
| skb_reserve(skb,16); |
| #else |
| struct sk_buff *skb = netdev_alloc_skb(dev, len + 2); |
| #endif |
| if(skb) |
| { |
| skb_reserve(skb,2); |
| #ifdef RCV_VIA_SKB |
| if( (unsigned long) (skb->data + R_BUF_SIZE) > 0x1000000) { |
| skb_put(skb,len); |
| skb_copy_to_linear_data(skb, (unsigned char *)(p->recv_skb[p->rmdnum]->data),len); |
| } |
| else { |
| struct sk_buff *skb1 = p->recv_skb[p->rmdnum]; |
| skb_put(skb,R_BUF_SIZE); |
| p->recv_skb[p->rmdnum] = skb; |
| rmdp->u.buffer = (u32) isa_virt_to_bus(skb->data); |
| skb = skb1; |
| skb_trim(skb,len); |
| } |
| #else |
| skb_put(skb,len); |
| skb_copy_to_linear_data(skb, (unsigned char *) p->recvbounce[p->rmdnum],len); |
| #endif |
| dev->stats.rx_packets++; |
| dev->stats.rx_bytes += len; |
| skb->protocol=eth_type_trans(skb,dev); |
| netif_rx(skb); |
| } |
| else |
| { |
| printk(KERN_ERR "%s: can't alloc new sk_buff\n",dev->name); |
| dev->stats.rx_dropped++; |
| } |
| } |
| else { |
| printk(KERN_INFO "%s: received runt packet\n",dev->name); |
| dev->stats.rx_errors++; |
| } |
| rmdp->blen = -(R_BUF_SIZE-8); |
| rmdp->mlen = 0; |
| rmdp->u.s.status = RCV_OWN; /* change owner */ |
| p->rmdnum = (p->rmdnum + 1) & (RMDNUM-1); |
| rmdp = p->rmdhead + p->rmdnum; |
| } |
| } |
| |
| /* |
| * kick xmitter .. |
| */ |
| |
| static void ni65_timeout(struct net_device *dev) |
| { |
| int i; |
| struct priv *p = dev->ml_priv; |
| |
| printk(KERN_ERR "%s: xmitter timed out, try to restart!\n",dev->name); |
| for(i=0;i<TMDNUM;i++) |
| printk("%02x ",p->tmdhead[i].u.s.status); |
| printk("\n"); |
| ni65_lance_reinit(dev); |
| netif_trans_update(dev); /* prevent tx timeout */ |
| netif_wake_queue(dev); |
| } |
| |
| /* |
| * Send a packet |
| */ |
| |
| static netdev_tx_t ni65_send_packet(struct sk_buff *skb, |
| struct net_device *dev) |
| { |
| struct priv *p = dev->ml_priv; |
| |
| netif_stop_queue(dev); |
| |
| if (test_and_set_bit(0, (void*)&p->lock)) { |
| printk(KERN_ERR "%s: Queue was locked.\n", dev->name); |
| return NETDEV_TX_BUSY; |
| } |
| |
| { |
| short len = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; |
| struct tmd *tmdp; |
| unsigned long flags; |
| |
| #ifdef XMT_VIA_SKB |
| if( (unsigned long) (skb->data + skb->len) > 0x1000000) { |
| #endif |
| |
| skb_copy_from_linear_data(skb, p->tmdbounce[p->tmdbouncenum], |
| skb->len > T_BUF_SIZE ? T_BUF_SIZE : |
| skb->len); |
| if (len > skb->len) |
| memset((char *)p->tmdbounce[p->tmdbouncenum]+skb->len, 0, len-skb->len); |
| dev_kfree_skb (skb); |
| |
| spin_lock_irqsave(&p->ring_lock, flags); |
| tmdp = p->tmdhead + p->tmdnum; |
| tmdp->u.buffer = (u32) isa_virt_to_bus(p->tmdbounce[p->tmdbouncenum]); |
| p->tmdbouncenum = (p->tmdbouncenum + 1) & (TMDNUM - 1); |
| |
| #ifdef XMT_VIA_SKB |
| } |
| else { |
| spin_lock_irqsave(&p->ring_lock, flags); |
| |
| tmdp = p->tmdhead + p->tmdnum; |
| tmdp->u.buffer = (u32) isa_virt_to_bus(skb->data); |
| p->tmd_skb[p->tmdnum] = skb; |
| } |
| #endif |
| tmdp->blen = -len; |
| |
| tmdp->u.s.status = XMIT_OWN | XMIT_START | XMIT_END; |
| writedatareg(CSR0_TDMD | CSR0_INEA); /* enable xmit & interrupt */ |
| |
| p->xmit_queued = 1; |
| p->tmdnum = (p->tmdnum + 1) & (TMDNUM-1); |
| |
| if(p->tmdnum != p->tmdlast) |
| netif_wake_queue(dev); |
| |
| p->lock = 0; |
| |
| spin_unlock_irqrestore(&p->ring_lock, flags); |
| } |
| |
| return NETDEV_TX_OK; |
| } |
| |
| static void set_multicast_list(struct net_device *dev) |
| { |
| if(!ni65_lance_reinit(dev)) |
| printk(KERN_ERR "%s: Can't switch card into MC mode!\n",dev->name); |
| netif_wake_queue(dev); |
| } |
| |
| #ifdef MODULE |
| static struct net_device *dev_ni65; |
| |
| module_param(irq, int, 0); |
| module_param(io, int, 0); |
| module_param(dma, int, 0); |
| MODULE_PARM_DESC(irq, "ni6510 IRQ number (ignored for some cards)"); |
| MODULE_PARM_DESC(io, "ni6510 I/O base address"); |
| MODULE_PARM_DESC(dma, "ni6510 ISA DMA channel (ignored for some cards)"); |
| |
| int __init init_module(void) |
| { |
| dev_ni65 = ni65_probe(-1); |
| return PTR_ERR_OR_ZERO(dev_ni65); |
| } |
| |
| void __exit cleanup_module(void) |
| { |
| unregister_netdev(dev_ni65); |
| cleanup_card(dev_ni65); |
| free_netdev(dev_ni65); |
| } |
| #endif /* MODULE */ |
| |
| MODULE_LICENSE("GPL"); |