| /* |
| |
| mii.c: MII interface library |
| |
| Maintained by Jeff Garzik <jgarzik@pobox.com> |
| Copyright 2001,2002 Jeff Garzik |
| |
| Various code came from myson803.c and other files by |
| Donald Becker. Copyright: |
| |
| Written 1998-2002 by Donald Becker. |
| |
| This software may be used and distributed according |
| to the terms of the GNU General Public License (GPL), |
| incorporated herein by reference. Drivers based on |
| or derived from this code fall under the GPL and must |
| retain the authorship, copyright and license notice. |
| This file is not a complete program and may only be |
| used when the entire operating system is licensed |
| under the GPL. |
| |
| The author may be reached as becker@scyld.com, or C/O |
| Scyld Computing Corporation |
| 410 Severn Ave., Suite 210 |
| Annapolis MD 21403 |
| |
| |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/netdevice.h> |
| #include <linux/ethtool.h> |
| #include <linux/mii.h> |
| |
| static u32 mii_get_an(struct mii_if_info *mii, u16 addr) |
| { |
| int advert; |
| |
| advert = mii->mdio_read(mii->dev, mii->phy_id, addr); |
| |
| return mii_lpa_to_ethtool_lpa_t(advert); |
| } |
| |
| /** |
| * mii_ethtool_gset - get settings that are specified in @ecmd |
| * @mii: MII interface |
| * @ecmd: requested ethtool_cmd |
| * |
| * The @ecmd parameter is expected to have been cleared before calling |
| * mii_ethtool_gset(). |
| * |
| * Returns 0 for success, negative on error. |
| */ |
| int mii_ethtool_gset(struct mii_if_info *mii, struct ethtool_cmd *ecmd) |
| { |
| struct net_device *dev = mii->dev; |
| u16 bmcr, bmsr, ctrl1000 = 0, stat1000 = 0; |
| u32 nego; |
| |
| ecmd->supported = |
| (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | |
| SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | |
| SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII); |
| if (mii->supports_gmii) |
| ecmd->supported |= SUPPORTED_1000baseT_Half | |
| SUPPORTED_1000baseT_Full; |
| |
| /* only supports twisted-pair */ |
| ecmd->port = PORT_MII; |
| |
| /* only supports internal transceiver */ |
| ecmd->transceiver = XCVR_INTERNAL; |
| |
| /* this isn't fully supported at higher layers */ |
| ecmd->phy_address = mii->phy_id; |
| ecmd->mdio_support = ETH_MDIO_SUPPORTS_C22; |
| |
| ecmd->advertising = ADVERTISED_TP | ADVERTISED_MII; |
| |
| bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR); |
| bmsr = mii->mdio_read(dev, mii->phy_id, MII_BMSR); |
| if (mii->supports_gmii) { |
| ctrl1000 = mii->mdio_read(dev, mii->phy_id, MII_CTRL1000); |
| stat1000 = mii->mdio_read(dev, mii->phy_id, MII_STAT1000); |
| } |
| if (bmcr & BMCR_ANENABLE) { |
| ecmd->advertising |= ADVERTISED_Autoneg; |
| ecmd->autoneg = AUTONEG_ENABLE; |
| |
| ecmd->advertising |= mii_get_an(mii, MII_ADVERTISE); |
| if (mii->supports_gmii) |
| ecmd->advertising |= |
| mii_ctrl1000_to_ethtool_adv_t(ctrl1000); |
| |
| if (bmsr & BMSR_ANEGCOMPLETE) { |
| ecmd->lp_advertising = mii_get_an(mii, MII_LPA); |
| ecmd->lp_advertising |= |
| mii_stat1000_to_ethtool_lpa_t(stat1000); |
| } else { |
| ecmd->lp_advertising = 0; |
| } |
| |
| nego = ecmd->advertising & ecmd->lp_advertising; |
| |
| if (nego & (ADVERTISED_1000baseT_Full | |
| ADVERTISED_1000baseT_Half)) { |
| ethtool_cmd_speed_set(ecmd, SPEED_1000); |
| ecmd->duplex = !!(nego & ADVERTISED_1000baseT_Full); |
| } else if (nego & (ADVERTISED_100baseT_Full | |
| ADVERTISED_100baseT_Half)) { |
| ethtool_cmd_speed_set(ecmd, SPEED_100); |
| ecmd->duplex = !!(nego & ADVERTISED_100baseT_Full); |
| } else { |
| ethtool_cmd_speed_set(ecmd, SPEED_10); |
| ecmd->duplex = !!(nego & ADVERTISED_10baseT_Full); |
| } |
| } else { |
| ecmd->autoneg = AUTONEG_DISABLE; |
| |
| ethtool_cmd_speed_set(ecmd, |
| ((bmcr & BMCR_SPEED1000 && |
| (bmcr & BMCR_SPEED100) == 0) ? |
| SPEED_1000 : |
| ((bmcr & BMCR_SPEED100) ? |
| SPEED_100 : SPEED_10))); |
| ecmd->duplex = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF; |
| } |
| |
| mii->full_duplex = ecmd->duplex; |
| |
| /* ignore maxtxpkt, maxrxpkt for now */ |
| |
| return 0; |
| } |
| |
| /** |
| * mii_ethtool_get_link_ksettings - get settings that are specified in @cmd |
| * @mii: MII interface |
| * @cmd: requested ethtool_link_ksettings |
| * |
| * The @cmd parameter is expected to have been cleared before calling |
| * mii_ethtool_get_link_ksettings(). |
| * |
| * Returns 0 for success, negative on error. |
| */ |
| int mii_ethtool_get_link_ksettings(struct mii_if_info *mii, |
| struct ethtool_link_ksettings *cmd) |
| { |
| struct net_device *dev = mii->dev; |
| u16 bmcr, bmsr, ctrl1000 = 0, stat1000 = 0; |
| u32 nego, supported, advertising, lp_advertising; |
| |
| supported = (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | |
| SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | |
| SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII); |
| if (mii->supports_gmii) |
| supported |= SUPPORTED_1000baseT_Half | |
| SUPPORTED_1000baseT_Full; |
| |
| /* only supports twisted-pair */ |
| cmd->base.port = PORT_MII; |
| |
| /* this isn't fully supported at higher layers */ |
| cmd->base.phy_address = mii->phy_id; |
| cmd->base.mdio_support = ETH_MDIO_SUPPORTS_C22; |
| |
| advertising = ADVERTISED_TP | ADVERTISED_MII; |
| |
| bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR); |
| bmsr = mii->mdio_read(dev, mii->phy_id, MII_BMSR); |
| if (mii->supports_gmii) { |
| ctrl1000 = mii->mdio_read(dev, mii->phy_id, MII_CTRL1000); |
| stat1000 = mii->mdio_read(dev, mii->phy_id, MII_STAT1000); |
| } |
| if (bmcr & BMCR_ANENABLE) { |
| advertising |= ADVERTISED_Autoneg; |
| cmd->base.autoneg = AUTONEG_ENABLE; |
| |
| advertising |= mii_get_an(mii, MII_ADVERTISE); |
| if (mii->supports_gmii) |
| advertising |= mii_ctrl1000_to_ethtool_adv_t(ctrl1000); |
| |
| if (bmsr & BMSR_ANEGCOMPLETE) { |
| lp_advertising = mii_get_an(mii, MII_LPA); |
| lp_advertising |= |
| mii_stat1000_to_ethtool_lpa_t(stat1000); |
| } else { |
| lp_advertising = 0; |
| } |
| |
| nego = advertising & lp_advertising; |
| |
| if (nego & (ADVERTISED_1000baseT_Full | |
| ADVERTISED_1000baseT_Half)) { |
| cmd->base.speed = SPEED_1000; |
| cmd->base.duplex = !!(nego & ADVERTISED_1000baseT_Full); |
| } else if (nego & (ADVERTISED_100baseT_Full | |
| ADVERTISED_100baseT_Half)) { |
| cmd->base.speed = SPEED_100; |
| cmd->base.duplex = !!(nego & ADVERTISED_100baseT_Full); |
| } else { |
| cmd->base.speed = SPEED_10; |
| cmd->base.duplex = !!(nego & ADVERTISED_10baseT_Full); |
| } |
| } else { |
| cmd->base.autoneg = AUTONEG_DISABLE; |
| |
| cmd->base.speed = ((bmcr & BMCR_SPEED1000 && |
| (bmcr & BMCR_SPEED100) == 0) ? |
| SPEED_1000 : |
| ((bmcr & BMCR_SPEED100) ? |
| SPEED_100 : SPEED_10)); |
| cmd->base.duplex = (bmcr & BMCR_FULLDPLX) ? |
| DUPLEX_FULL : DUPLEX_HALF; |
| |
| lp_advertising = 0; |
| } |
| |
| mii->full_duplex = cmd->base.duplex; |
| |
| ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported, |
| supported); |
| ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising, |
| advertising); |
| ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.lp_advertising, |
| lp_advertising); |
| |
| /* ignore maxtxpkt, maxrxpkt for now */ |
| |
| return 0; |
| } |
| |
| /** |
| * mii_ethtool_sset - set settings that are specified in @ecmd |
| * @mii: MII interface |
| * @ecmd: requested ethtool_cmd |
| * |
| * Returns 0 for success, negative on error. |
| */ |
| int mii_ethtool_sset(struct mii_if_info *mii, struct ethtool_cmd *ecmd) |
| { |
| struct net_device *dev = mii->dev; |
| u32 speed = ethtool_cmd_speed(ecmd); |
| |
| if (speed != SPEED_10 && |
| speed != SPEED_100 && |
| speed != SPEED_1000) |
| return -EINVAL; |
| if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL) |
| return -EINVAL; |
| if (ecmd->port != PORT_MII) |
| return -EINVAL; |
| if (ecmd->transceiver != XCVR_INTERNAL) |
| return -EINVAL; |
| if (ecmd->phy_address != mii->phy_id) |
| return -EINVAL; |
| if (ecmd->autoneg != AUTONEG_DISABLE && ecmd->autoneg != AUTONEG_ENABLE) |
| return -EINVAL; |
| if ((speed == SPEED_1000) && (!mii->supports_gmii)) |
| return -EINVAL; |
| |
| /* ignore supported, maxtxpkt, maxrxpkt */ |
| |
| if (ecmd->autoneg == AUTONEG_ENABLE) { |
| u32 bmcr, advert, tmp; |
| u32 advert2 = 0, tmp2 = 0; |
| |
| if ((ecmd->advertising & (ADVERTISED_10baseT_Half | |
| ADVERTISED_10baseT_Full | |
| ADVERTISED_100baseT_Half | |
| ADVERTISED_100baseT_Full | |
| ADVERTISED_1000baseT_Half | |
| ADVERTISED_1000baseT_Full)) == 0) |
| return -EINVAL; |
| |
| /* advertise only what has been requested */ |
| advert = mii->mdio_read(dev, mii->phy_id, MII_ADVERTISE); |
| tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4); |
| if (mii->supports_gmii) { |
| advert2 = mii->mdio_read(dev, mii->phy_id, MII_CTRL1000); |
| tmp2 = advert2 & ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL); |
| } |
| tmp |= ethtool_adv_to_mii_adv_t(ecmd->advertising); |
| |
| if (mii->supports_gmii) |
| tmp2 |= |
| ethtool_adv_to_mii_ctrl1000_t(ecmd->advertising); |
| if (advert != tmp) { |
| mii->mdio_write(dev, mii->phy_id, MII_ADVERTISE, tmp); |
| mii->advertising = tmp; |
| } |
| if ((mii->supports_gmii) && (advert2 != tmp2)) |
| mii->mdio_write(dev, mii->phy_id, MII_CTRL1000, tmp2); |
| |
| /* turn on autonegotiation, and force a renegotiate */ |
| bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR); |
| bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART); |
| mii->mdio_write(dev, mii->phy_id, MII_BMCR, bmcr); |
| |
| mii->force_media = 0; |
| } else { |
| u32 bmcr, tmp; |
| |
| /* turn off auto negotiation, set speed and duplexity */ |
| bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR); |
| tmp = bmcr & ~(BMCR_ANENABLE | BMCR_SPEED100 | |
| BMCR_SPEED1000 | BMCR_FULLDPLX); |
| if (speed == SPEED_1000) |
| tmp |= BMCR_SPEED1000; |
| else if (speed == SPEED_100) |
| tmp |= BMCR_SPEED100; |
| if (ecmd->duplex == DUPLEX_FULL) { |
| tmp |= BMCR_FULLDPLX; |
| mii->full_duplex = 1; |
| } else |
| mii->full_duplex = 0; |
| if (bmcr != tmp) |
| mii->mdio_write(dev, mii->phy_id, MII_BMCR, tmp); |
| |
| mii->force_media = 1; |
| } |
| return 0; |
| } |
| |
| /** |
| * mii_ethtool_set_link_ksettings - set settings that are specified in @cmd |
| * @mii: MII interfaces |
| * @cmd: requested ethtool_link_ksettings |
| * |
| * Returns 0 for success, negative on error. |
| */ |
| int mii_ethtool_set_link_ksettings(struct mii_if_info *mii, |
| const struct ethtool_link_ksettings *cmd) |
| { |
| struct net_device *dev = mii->dev; |
| u32 speed = cmd->base.speed; |
| |
| if (speed != SPEED_10 && |
| speed != SPEED_100 && |
| speed != SPEED_1000) |
| return -EINVAL; |
| if (cmd->base.duplex != DUPLEX_HALF && cmd->base.duplex != DUPLEX_FULL) |
| return -EINVAL; |
| if (cmd->base.port != PORT_MII) |
| return -EINVAL; |
| if (cmd->base.phy_address != mii->phy_id) |
| return -EINVAL; |
| if (cmd->base.autoneg != AUTONEG_DISABLE && |
| cmd->base.autoneg != AUTONEG_ENABLE) |
| return -EINVAL; |
| if ((speed == SPEED_1000) && (!mii->supports_gmii)) |
| return -EINVAL; |
| |
| /* ignore supported, maxtxpkt, maxrxpkt */ |
| |
| if (cmd->base.autoneg == AUTONEG_ENABLE) { |
| u32 bmcr, advert, tmp; |
| u32 advert2 = 0, tmp2 = 0; |
| u32 advertising; |
| |
| ethtool_convert_link_mode_to_legacy_u32( |
| &advertising, cmd->link_modes.advertising); |
| |
| if ((advertising & (ADVERTISED_10baseT_Half | |
| ADVERTISED_10baseT_Full | |
| ADVERTISED_100baseT_Half | |
| ADVERTISED_100baseT_Full | |
| ADVERTISED_1000baseT_Half | |
| ADVERTISED_1000baseT_Full)) == 0) |
| return -EINVAL; |
| |
| /* advertise only what has been requested */ |
| advert = mii->mdio_read(dev, mii->phy_id, MII_ADVERTISE); |
| tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4); |
| if (mii->supports_gmii) { |
| advert2 = mii->mdio_read(dev, mii->phy_id, |
| MII_CTRL1000); |
| tmp2 = advert2 & |
| ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL); |
| } |
| tmp |= ethtool_adv_to_mii_adv_t(advertising); |
| |
| if (mii->supports_gmii) |
| tmp2 |= ethtool_adv_to_mii_ctrl1000_t(advertising); |
| if (advert != tmp) { |
| mii->mdio_write(dev, mii->phy_id, MII_ADVERTISE, tmp); |
| mii->advertising = tmp; |
| } |
| if ((mii->supports_gmii) && (advert2 != tmp2)) |
| mii->mdio_write(dev, mii->phy_id, MII_CTRL1000, tmp2); |
| |
| /* turn on autonegotiation, and force a renegotiate */ |
| bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR); |
| bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART); |
| mii->mdio_write(dev, mii->phy_id, MII_BMCR, bmcr); |
| |
| mii->force_media = 0; |
| } else { |
| u32 bmcr, tmp; |
| |
| /* turn off auto negotiation, set speed and duplexity */ |
| bmcr = mii->mdio_read(dev, mii->phy_id, MII_BMCR); |
| tmp = bmcr & ~(BMCR_ANENABLE | BMCR_SPEED100 | |
| BMCR_SPEED1000 | BMCR_FULLDPLX); |
| if (speed == SPEED_1000) |
| tmp |= BMCR_SPEED1000; |
| else if (speed == SPEED_100) |
| tmp |= BMCR_SPEED100; |
| if (cmd->base.duplex == DUPLEX_FULL) { |
| tmp |= BMCR_FULLDPLX; |
| mii->full_duplex = 1; |
| } else { |
| mii->full_duplex = 0; |
| } |
| if (bmcr != tmp) |
| mii->mdio_write(dev, mii->phy_id, MII_BMCR, tmp); |
| |
| mii->force_media = 1; |
| } |
| return 0; |
| } |
| |
| /** |
| * mii_check_gmii_support - check if the MII supports Gb interfaces |
| * @mii: the MII interface |
| */ |
| int mii_check_gmii_support(struct mii_if_info *mii) |
| { |
| int reg; |
| |
| reg = mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR); |
| if (reg & BMSR_ESTATEN) { |
| reg = mii->mdio_read(mii->dev, mii->phy_id, MII_ESTATUS); |
| if (reg & (ESTATUS_1000_TFULL | ESTATUS_1000_THALF)) |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * mii_link_ok - is link status up/ok |
| * @mii: the MII interface |
| * |
| * Returns 1 if the MII reports link status up/ok, 0 otherwise. |
| */ |
| int mii_link_ok (struct mii_if_info *mii) |
| { |
| /* first, a dummy read, needed to latch some MII phys */ |
| mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR); |
| if (mii->mdio_read(mii->dev, mii->phy_id, MII_BMSR) & BMSR_LSTATUS) |
| return 1; |
| return 0; |
| } |
| |
| /** |
| * mii_nway_restart - restart NWay (autonegotiation) for this interface |
| * @mii: the MII interface |
| * |
| * Returns 0 on success, negative on error. |
| */ |
| int mii_nway_restart (struct mii_if_info *mii) |
| { |
| int bmcr; |
| int r = -EINVAL; |
| |
| /* if autoneg is off, it's an error */ |
| bmcr = mii->mdio_read(mii->dev, mii->phy_id, MII_BMCR); |
| |
| if (bmcr & BMCR_ANENABLE) { |
| bmcr |= BMCR_ANRESTART; |
| mii->mdio_write(mii->dev, mii->phy_id, MII_BMCR, bmcr); |
| r = 0; |
| } |
| |
| return r; |
| } |
| |
| /** |
| * mii_check_link - check MII link status |
| * @mii: MII interface |
| * |
| * If the link status changed (previous != current), call |
| * netif_carrier_on() if current link status is Up or call |
| * netif_carrier_off() if current link status is Down. |
| */ |
| void mii_check_link (struct mii_if_info *mii) |
| { |
| int cur_link = mii_link_ok(mii); |
| int prev_link = netif_carrier_ok(mii->dev); |
| |
| if (cur_link && !prev_link) |
| netif_carrier_on(mii->dev); |
| else if (prev_link && !cur_link) |
| netif_carrier_off(mii->dev); |
| } |
| |
| /** |
| * mii_check_media - check the MII interface for a carrier/speed/duplex change |
| * @mii: the MII interface |
| * @ok_to_print: OK to print link up/down messages |
| * @init_media: OK to save duplex mode in @mii |
| * |
| * Returns 1 if the duplex mode changed, 0 if not. |
| * If the media type is forced, always returns 0. |
| */ |
| unsigned int mii_check_media (struct mii_if_info *mii, |
| unsigned int ok_to_print, |
| unsigned int init_media) |
| { |
| unsigned int old_carrier, new_carrier; |
| int advertise, lpa, media, duplex; |
| int lpa2 = 0; |
| |
| /* check current and old link status */ |
| old_carrier = netif_carrier_ok(mii->dev) ? 1 : 0; |
| new_carrier = (unsigned int) mii_link_ok(mii); |
| |
| /* if carrier state did not change, this is a "bounce", |
| * just exit as everything is already set correctly |
| */ |
| if ((!init_media) && (old_carrier == new_carrier)) |
| return 0; /* duplex did not change */ |
| |
| /* no carrier, nothing much to do */ |
| if (!new_carrier) { |
| netif_carrier_off(mii->dev); |
| if (ok_to_print) |
| netdev_info(mii->dev, "link down\n"); |
| return 0; /* duplex did not change */ |
| } |
| |
| /* |
| * we have carrier, see who's on the other end |
| */ |
| netif_carrier_on(mii->dev); |
| |
| if (mii->force_media) { |
| if (ok_to_print) |
| netdev_info(mii->dev, "link up\n"); |
| return 0; /* duplex did not change */ |
| } |
| |
| /* get MII advertise and LPA values */ |
| if ((!init_media) && (mii->advertising)) |
| advertise = mii->advertising; |
| else { |
| advertise = mii->mdio_read(mii->dev, mii->phy_id, MII_ADVERTISE); |
| mii->advertising = advertise; |
| } |
| lpa = mii->mdio_read(mii->dev, mii->phy_id, MII_LPA); |
| if (mii->supports_gmii) |
| lpa2 = mii->mdio_read(mii->dev, mii->phy_id, MII_STAT1000); |
| |
| /* figure out media and duplex from advertise and LPA values */ |
| media = mii_nway_result(lpa & advertise); |
| duplex = (media & ADVERTISE_FULL) ? 1 : 0; |
| if (lpa2 & LPA_1000FULL) |
| duplex = 1; |
| |
| if (ok_to_print) |
| netdev_info(mii->dev, "link up, %uMbps, %s-duplex, lpa 0x%04X\n", |
| lpa2 & (LPA_1000FULL | LPA_1000HALF) ? 1000 : |
| media & (ADVERTISE_100FULL | ADVERTISE_100HALF) ? |
| 100 : 10, |
| duplex ? "full" : "half", |
| lpa); |
| |
| if ((init_media) || (mii->full_duplex != duplex)) { |
| mii->full_duplex = duplex; |
| return 1; /* duplex changed */ |
| } |
| |
| return 0; /* duplex did not change */ |
| } |
| |
| /** |
| * generic_mii_ioctl - main MII ioctl interface |
| * @mii_if: the MII interface |
| * @mii_data: MII ioctl data structure |
| * @cmd: MII ioctl command |
| * @duplex_chg_out: pointer to @duplex_changed status if there was no |
| * ioctl error |
| * |
| * Returns 0 on success, negative on error. |
| */ |
| int generic_mii_ioctl(struct mii_if_info *mii_if, |
| struct mii_ioctl_data *mii_data, int cmd, |
| unsigned int *duplex_chg_out) |
| { |
| int rc = 0; |
| unsigned int duplex_changed = 0; |
| |
| if (duplex_chg_out) |
| *duplex_chg_out = 0; |
| |
| mii_data->phy_id &= mii_if->phy_id_mask; |
| mii_data->reg_num &= mii_if->reg_num_mask; |
| |
| switch(cmd) { |
| case SIOCGMIIPHY: |
| mii_data->phy_id = mii_if->phy_id; |
| /* fall through */ |
| |
| case SIOCGMIIREG: |
| mii_data->val_out = |
| mii_if->mdio_read(mii_if->dev, mii_data->phy_id, |
| mii_data->reg_num); |
| break; |
| |
| case SIOCSMIIREG: { |
| u16 val = mii_data->val_in; |
| |
| if (mii_data->phy_id == mii_if->phy_id) { |
| switch(mii_data->reg_num) { |
| case MII_BMCR: { |
| unsigned int new_duplex = 0; |
| if (val & (BMCR_RESET|BMCR_ANENABLE)) |
| mii_if->force_media = 0; |
| else |
| mii_if->force_media = 1; |
| if (mii_if->force_media && |
| (val & BMCR_FULLDPLX)) |
| new_duplex = 1; |
| if (mii_if->full_duplex != new_duplex) { |
| duplex_changed = 1; |
| mii_if->full_duplex = new_duplex; |
| } |
| break; |
| } |
| case MII_ADVERTISE: |
| mii_if->advertising = val; |
| break; |
| default: |
| /* do nothing */ |
| break; |
| } |
| } |
| |
| mii_if->mdio_write(mii_if->dev, mii_data->phy_id, |
| mii_data->reg_num, val); |
| break; |
| } |
| |
| default: |
| rc = -EOPNOTSUPP; |
| break; |
| } |
| |
| if ((rc == 0) && (duplex_chg_out) && (duplex_changed)) |
| *duplex_chg_out = 1; |
| |
| return rc; |
| } |
| |
| MODULE_AUTHOR ("Jeff Garzik <jgarzik@pobox.com>"); |
| MODULE_DESCRIPTION ("MII hardware support library"); |
| MODULE_LICENSE("GPL"); |
| |
| EXPORT_SYMBOL(mii_link_ok); |
| EXPORT_SYMBOL(mii_nway_restart); |
| EXPORT_SYMBOL(mii_ethtool_gset); |
| EXPORT_SYMBOL(mii_ethtool_get_link_ksettings); |
| EXPORT_SYMBOL(mii_ethtool_sset); |
| EXPORT_SYMBOL(mii_ethtool_set_link_ksettings); |
| EXPORT_SYMBOL(mii_check_link); |
| EXPORT_SYMBOL(mii_check_media); |
| EXPORT_SYMBOL(mii_check_gmii_support); |
| EXPORT_SYMBOL(generic_mii_ioctl); |
| |