arch/arm/boot/dts/omap3-sbc-t3530.dts

/*
 * Suppport for CompuLab SBC-T3530 with CM-T3530
 */

#include "omap3-cm-t3530.dts"
#include "omap3-sb-t35.dtsi"

/ {
	model = "CompuLab SBC-T3530 with CM-T3530";
	compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";

	aliases {
		display0 = &dvi0;
		display1 = &tv0;
	};
};

&omap3_pmx_core {
	pinctrl-names = "default";
	pinctrl-0 = <&sb_t35_usb_hub_pins>;

	sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
		pinctrl-single,pins = <
			OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_167 - SB-T35 USB HUB RST */
		>;
	};
};

/*
 * The following ranges correspond to SMSC9x eth chips on CM-T3530 CoM and
 * SB-T35 baseboard respectively.
 * This setting includes both chips in SBC-T3530 board device tree.
 */
&gpmc {
	ranges = <5 0 0x2c000000 0x01000000>,
		 <4 0 0x2d000000 0x01000000>;
};

&mmc1 {
	cd-gpios =  <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
};

&dss {
	port {
		dpi_out: endpoint {
			remote-endpoint = <&tfp410_in>;
			data-lines = <24>;
		};
	};
};