arch/arm/mach-omap2/sleep43xx.S - linux - Git at Google

 /* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Low level suspend code for AM43XX SoCs
  *
  * Copyright (C) 2013-2018 Texas Instruments Incorporated - http://www.ti.com/
  *	Dave Gerlach, Vaibhav Bedia
  */

 #include <linux/linkage.h>
 #include <linux/ti-emif-sram.h>
 #include <linux/platform_data/pm33xx.h>
 #include <asm/assembler.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/memory.h>

 #include "cm33xx.h"
 #include "common.h"
 #include "iomap.h"
 #include "omap-secure.h"
 #include "omap44xx.h"
 #include "pm-asm-offsets.h"
 #include "prm33xx.h"
 #include "prcm43xx.h"

 /* replicated define because linux/bitops.h cannot be included in assembly */
 #define BIT(nr)			(1 << (nr))

 #define AM33XX_CM_CLKCTRL_MODULESTATE_DISABLED		0x00030000
 #define AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE		0x0003
 #define AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE		0x0002

 #define AM43XX_EMIF_POWEROFF_ENABLE			0x1
 #define AM43XX_EMIF_POWEROFF_DISABLE			0x0

 #define AM43XX_CM_CLKSTCTRL_CLKTRCTRL_SW_SLEEP		0x1
 #define AM43XX_CM_CLKSTCTRL_CLKTRCTRL_HW_AUTO		0x3

 #define AM43XX_CM_BASE					0x44DF0000

 #define AM43XX_CM_REGADDR(inst, reg)                           \
        AM33XX_L4_WK_IO_ADDRESS(AM43XX_CM_BASE + (inst) + (reg))

 #define AM43XX_CM_MPU_CLKSTCTRL AM43XX_CM_REGADDR(AM43XX_CM_MPU_INST, \
 					AM43XX_CM_MPU_MPU_CDOFFS)
 #define AM43XX_CM_MPU_MPU_CLKCTRL AM43XX_CM_REGADDR(AM43XX_CM_MPU_INST, \
 					AM43XX_CM_MPU_MPU_CLKCTRL_OFFSET)
 #define AM43XX_CM_PER_EMIF_CLKCTRL  AM43XX_CM_REGADDR(AM43XX_CM_PER_INST, \
 					AM43XX_CM_PER_EMIF_CLKCTRL_OFFSET)
 #define AM43XX_PRM_EMIF_CTRL_OFFSET			0x0030

 #define RTC_SECONDS_REG					0x0
 #define RTC_PMIC_REG					0x98
 #define RTC_PMIC_POWER_EN				BIT(16)
 #define RTC_PMIC_EXT_WAKEUP_STS				BIT(12)
 #define RTC_PMIC_EXT_WAKEUP_POL				BIT(4)
 #define RTC_PMIC_EXT_WAKEUP_EN				BIT(0)

 	.arm
 	.arch armv7-a
 	.arch_extension sec
 	.align 3

 ENTRY(am43xx_do_wfi)
 	stmfd	sp!, {r4 - r11, lr}	@ save registers on stack

 	/* Save wfi_flags arg to data space */
 	mov	r4, r0
 	adr	r3, am43xx_pm_ro_sram_data
 	ldr	r2, [r3, #AMX3_PM_RO_SRAM_DATA_VIRT_OFFSET]
 	str	r4, [r2, #AMX3_PM_WFI_FLAGS_OFFSET]

 #ifdef CONFIG_CACHE_L2X0
 	/* Retrieve l2 cache virt address BEFORE we shut off EMIF */
 	ldr	r1, get_l2cache_base
 	blx	r1
 	mov	r8, r0
 #endif

 	/* Only flush cache is we know we are losing MPU context */
 	tst	r4, #WFI_FLAG_FLUSH_CACHE
 	beq	cache_skip_flush

 	/*
 	 * Flush all data from the L1 and L2 data cache before disabling
 	 * SCTLR.C bit.
 	 */
 	ldr	r1, kernel_flush
 	blx	r1

 	/*
 	 * Clear the SCTLR.C bit to prevent further data cache
 	 * allocation. Clearing SCTLR.C would make all the data accesses
 	 * strongly ordered and would not hit the cache.
 	 */
 	mrc	p15, 0, r0, c1, c0, 0
 	bic	r0, r0, #(1 << 2)	@ Disable the C bit
 	mcr	p15, 0, r0, c1, c0, 0
 	isb
 	dsb

 	/*
 	 * Invalidate L1 and L2 data cache.
 	 */
 	ldr	r1, kernel_flush
 	blx	r1

 #ifdef CONFIG_CACHE_L2X0
 	/*
 	 * Clean and invalidate the L2 cache.
 	 */
 #ifdef CONFIG_PL310_ERRATA_727915
 	mov	r0, #0x03
 	mov	r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX
 	dsb
 	smc	#0
 	dsb
 #endif
 	mov	r0, r8
 	adr	r4, am43xx_pm_ro_sram_data
 	ldr	r3, [r4, #AMX3_PM_RO_SRAM_DATA_VIRT_OFFSET]

 	mov	r2, r0
 	ldr	r0, [r2, #L2X0_AUX_CTRL]
 	str	r0, [r3, #AMX3_PM_L2_AUX_CTRL_VAL_OFFSET]
 	ldr	r0, [r2, #L310_PREFETCH_CTRL]
 	str	r0, [r3, #AMX3_PM_L2_PREFETCH_CTRL_VAL_OFFSET]

 	ldr	r0, l2_val
 	str	r0, [r2, #L2X0_CLEAN_INV_WAY]
 wait:
 	ldr	r0, [r2, #L2X0_CLEAN_INV_WAY]
 	ldr	r1, l2_val
 	ands	r0, r0, r1
 	bne	wait
 #ifdef CONFIG_PL310_ERRATA_727915
 	mov	r0, #0x00
 	mov	r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX
 	dsb
 	smc	#0
 	dsb
 #endif
 l2x_sync:
 	mov	r0, r8
 	mov	r2, r0
 	mov	r0, #0x0
 	str	r0, [r2, #L2X0_CACHE_SYNC]
 sync:
 	ldr	r0, [r2, #L2X0_CACHE_SYNC]
 	ands	r0, r0, #0x1
 	bne	sync
 #endif

 	/* Restore wfi_flags */
 	adr	r3, am43xx_pm_ro_sram_data
 	ldr	r2, [r3, #AMX3_PM_RO_SRAM_DATA_VIRT_OFFSET]
 	ldr	r4, [r2, #AMX3_PM_WFI_FLAGS_OFFSET]

 cache_skip_flush:
 	/*
 	 * If we are trying to enter RTC+DDR mode we must perform
 	 * a read from the rtc address space to ensure translation
 	 * presence in the TLB to avoid page table walk after DDR
 	 * is unavailable.
 	 */
 	tst	r4, #WFI_FLAG_RTC_ONLY
 	beq	skip_rtc_va_refresh

 	adr	r3, am43xx_pm_ro_sram_data
 	ldr	r1, [r3, #AMX3_PM_RTC_BASE_VIRT_OFFSET]
 	ldr	r0, [r1]

 skip_rtc_va_refresh:
 	/* Check if we want self refresh */
 	tst	r4, #WFI_FLAG_SELF_REFRESH
 	beq	emif_skip_enter_sr

 	adr     r9, am43xx_emif_sram_table

 	ldr     r3, [r9, #EMIF_PM_ENTER_SR_OFFSET]
 	blx     r3

 emif_skip_enter_sr:
 	/* Only necessary if PER is losing context */
 	tst	r4, #WFI_FLAG_SAVE_EMIF
 	beq	emif_skip_save

 	ldr     r3, [r9, #EMIF_PM_SAVE_CONTEXT_OFFSET]
 	blx	r3

 emif_skip_save:
 	/* Only can disable EMIF if we have entered self refresh */
 	tst	r4, #WFI_FLAG_SELF_REFRESH
 	beq	emif_skip_disable

 	/* Disable EMIF */
 	ldr	r1, am43xx_virt_emif_clkctrl
 	ldr	r2, [r1]
 	bic	r2, r2, #AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE
 	str	r2, [r1]

 wait_emif_disable:
 	ldr	r2, [r1]
 	mov	r3, #AM33XX_CM_CLKCTRL_MODULESTATE_DISABLED
 	cmp	r2, r3
 	bne	wait_emif_disable

 emif_skip_disable:
 	tst	r4, #WFI_FLAG_RTC_ONLY
 	beq	skip_rtc_only

 	adr	r3, am43xx_pm_ro_sram_data
 	ldr	r1, [r3, #AMX3_PM_RTC_BASE_VIRT_OFFSET]

 	ldr	r0, [r1, #RTC_PMIC_REG]
 	orr	r0, r0, #RTC_PMIC_POWER_EN
 	orr	r0, r0, #RTC_PMIC_EXT_WAKEUP_STS
 	orr	r0, r0, #RTC_PMIC_EXT_WAKEUP_EN
 	orr	r0, r0, #RTC_PMIC_EXT_WAKEUP_POL
 	str	r0, [r1, #RTC_PMIC_REG]
 	ldr	r0, [r1, #RTC_PMIC_REG]
 	/* Wait for 2 seconds to lose power */
 	mov	r3, #2
 	ldr	r2, [r1, #RTC_SECONDS_REG]
 rtc_loop:
 	ldr	r0, [r1, #RTC_SECONDS_REG]
 	cmp	r0, r2
 	beq	rtc_loop
 	mov	r2, r0
 	subs	r3, r3, #1
 	bne	rtc_loop

 	b	re_enable_emif

 skip_rtc_only:

 	tst	r4, #WFI_FLAG_WAKE_M3
 	beq	wkup_m3_skip

 	/*
 	 * For the MPU WFI to be registered as an interrupt
 	 * to WKUP_M3, MPU_CLKCTRL.MODULEMODE needs to be set
 	 * to DISABLED
 	 */
 	ldr	r1, am43xx_virt_mpu_clkctrl
 	ldr	r2, [r1]
 	bic	r2, r2, #AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE
 	str	r2, [r1]

 	/*
 	 * Put MPU CLKDM to SW_SLEEP
 	 */
 	ldr	r1, am43xx_virt_mpu_clkstctrl
 	mov	r2, #AM43XX_CM_CLKSTCTRL_CLKTRCTRL_SW_SLEEP
 	str	r2, [r1]

 wkup_m3_skip:
 	/*
 	 * Execute a barrier instruction to ensure that all cache,
 	 * TLB and branch predictor maintenance operations issued
 	 * have completed.
 	 */
 	dsb
 	dmb

 	/*
 	 * Execute a WFI instruction and wait until the
 	 * STANDBYWFI output is asserted to indicate that the
 	 * CPU is in idle and low power state. CPU can specualatively
 	 * prefetch the instructions so add NOPs after WFI. Sixteen
 	 * NOPs as per Cortex-A9 pipeline.
 	 */
 	wfi

 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop
 	nop

 	/* We come here in case of an abort due to a late interrupt */
 	ldr	r1, am43xx_virt_mpu_clkstctrl
 	mov	r2, #AM43XX_CM_CLKSTCTRL_CLKTRCTRL_HW_AUTO
 	str	r2, [r1]

 	/* Set MPU_CLKCTRL.MODULEMODE back to ENABLE */
 	ldr	r1, am43xx_virt_mpu_clkctrl
 	mov	r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
 	str	r2, [r1]

 re_enable_emif:
 	/* Re-enable EMIF */
 	ldr	r1, am43xx_virt_emif_clkctrl
 	mov	r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
 	str	r2, [r1]
 wait_emif_enable:
 	ldr	r3, [r1]
 	cmp	r2, r3
 	bne	wait_emif_enable

 	tst	r4, #WFI_FLAG_FLUSH_CACHE
 	beq	cache_skip_restore

 	/*
 	 * Set SCTLR.C bit to allow data cache allocation
 	 */
 	mrc	p15, 0, r0, c1, c0, 0
 	orr	r0, r0, #(1 << 2)	@ Enable the C bit
 	mcr	p15, 0, r0, c1, c0, 0
 	isb

 cache_skip_restore:
 	/* Only necessary if PER is losing context */
 	tst	r4, #WFI_FLAG_SELF_REFRESH
 	beq	emif_skip_exit_sr_abt

 	adr	r9, am43xx_emif_sram_table
 	ldr	r1, [r9, #EMIF_PM_ABORT_SR_OFFSET]
 	blx	r1

 emif_skip_exit_sr_abt:
 	/* Let the suspend code know about the abort */
 	mov	r0, #1
 	ldmfd	sp!, {r4 - r11, pc}	@ restore regs and return
 ENDPROC(am43xx_do_wfi)

 	.align
 ENTRY(am43xx_resume_offset)
 	.word . - am43xx_do_wfi

 ENTRY(am43xx_resume_from_deep_sleep)
 	/* Set MPU CLKSTCTRL to HW AUTO so that CPUidle works properly */
 	ldr	r1, am43xx_virt_mpu_clkstctrl
 	mov	r2, #AM43XX_CM_CLKSTCTRL_CLKTRCTRL_HW_AUTO
 	str	r2, [r1]

 	/* For AM43xx, use EMIF power down until context is restored */
 	ldr	r2, am43xx_phys_emif_poweroff
 	mov	r1, #AM43XX_EMIF_POWEROFF_ENABLE
 	str	r1, [r2, #0x0]

 	/* Re-enable EMIF */
 	ldr	r1, am43xx_phys_emif_clkctrl
 	mov	r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
 	str	r2, [r1]
 wait_emif_enable1:
 	ldr	r3, [r1]
 	cmp	r2, r3
 	bne	wait_emif_enable1

 	adr     r9, am43xx_emif_sram_table

 	ldr     r1, [r9, #EMIF_PM_RESTORE_CONTEXT_OFFSET]
 	blx     r1

 	ldr     r1, [r9, #EMIF_PM_EXIT_SR_OFFSET]
 	blx     r1

 	ldr     r2, am43xx_phys_emif_poweroff
 	mov     r1, #AM43XX_EMIF_POWEROFF_DISABLE
 	str     r1, [r2, #0x0]

 	ldr     r1, [r9, #EMIF_PM_RUN_HW_LEVELING]
 	blx     r1

 #ifdef CONFIG_CACHE_L2X0
 	ldr	r2, l2_cache_base
 	ldr	r0, [r2, #L2X0_CTRL]
 	and	r0, #0x0f
 	cmp	r0, #1
 	beq	skip_l2en			@ Skip if already enabled

 	adr	r4, am43xx_pm_ro_sram_data
 	ldr	r3, [r4, #AMX3_PM_RO_SRAM_DATA_PHYS_OFFSET]
 	ldr     r0, [r3, #AMX3_PM_L2_PREFETCH_CTRL_VAL_OFFSET]

 	ldr	r12, l2_smc1
 	dsb
 	smc	#0
 	dsb
 set_aux_ctrl:
 	ldr     r0, [r3, #AMX3_PM_L2_AUX_CTRL_VAL_OFFSET]
 	ldr	r12, l2_smc2
 	dsb
 	smc	#0
 	dsb

 	/* L2 invalidate on resume */
 	ldr	r0, l2_val
 	ldr	r2, l2_cache_base
 	str	r0, [r2, #L2X0_INV_WAY]
 wait2:
 	ldr	r0, [r2, #L2X0_INV_WAY]
 	ldr	r1, l2_val
 	ands	r0, r0, r1
 	bne	wait2
 #ifdef CONFIG_PL310_ERRATA_727915
 	mov	r0, #0x00
 	mov	r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX
 	dsb
 	smc	#0
 	dsb
 #endif
 l2x_sync2:
 	ldr	r2, l2_cache_base
 	mov	r0, #0x0
 	str	r0, [r2, #L2X0_CACHE_SYNC]
 sync2:
 	ldr	r0, [r2, #L2X0_CACHE_SYNC]
 	ands	r0, r0, #0x1
 	bne	sync2

 	mov	r0, #0x1
 	ldr	r12, l2_smc3
 	dsb
 	smc	#0
 	dsb
 #endif
 skip_l2en:
 	/* We are back. Branch to the common CPU resume routine */
 	mov	r0, #0
 	ldr	pc, resume_addr
 ENDPROC(am43xx_resume_from_deep_sleep)

 /*
  * Local variables
  */
 	.align
 kernel_flush:
 	.word   v7_flush_dcache_all
 ddr_start:
 	.word	PAGE_OFFSET

 am43xx_phys_emif_poweroff:
 	.word   (AM43XX_CM_BASE + AM43XX_PRM_DEVICE_INST + \
 		 AM43XX_PRM_EMIF_CTRL_OFFSET)
 am43xx_virt_mpu_clkstctrl:
 	.word	(AM43XX_CM_MPU_CLKSTCTRL)
 am43xx_virt_mpu_clkctrl:
 	.word	(AM43XX_CM_MPU_MPU_CLKCTRL)
 am43xx_virt_emif_clkctrl:
 	.word	(AM43XX_CM_PER_EMIF_CLKCTRL)
 am43xx_phys_emif_clkctrl:
 	.word	(AM43XX_CM_BASE + AM43XX_CM_PER_INST + \
 		 AM43XX_CM_PER_EMIF_CLKCTRL_OFFSET)

 #ifdef CONFIG_CACHE_L2X0
 /* L2 cache related defines for AM437x */
 get_l2cache_base:
 	.word	omap4_get_l2cache_base
 l2_cache_base:
 	.word	OMAP44XX_L2CACHE_BASE
 l2_smc1:
 	.word	OMAP4_MON_L2X0_PREFETCH_INDEX
 l2_smc2:
 	.word	OMAP4_MON_L2X0_AUXCTRL_INDEX
 l2_smc3:
 	.word	OMAP4_MON_L2X0_CTRL_INDEX
 l2_val:
 	.word	0xffff
 #endif

 .align 3
 /* DDR related defines */
 ENTRY(am43xx_emif_sram_table)
 	.space EMIF_PM_FUNCTIONS_SIZE

 ENTRY(am43xx_pm_sram)
 	.word am43xx_do_wfi
 	.word am43xx_do_wfi_sz
 	.word am43xx_resume_offset
 	.word am43xx_emif_sram_table
 	.word am43xx_pm_ro_sram_data

 resume_addr:
 	.word   cpu_resume - PAGE_OFFSET + 0x80000000
 .align 3

 ENTRY(am43xx_pm_ro_sram_data)
 	.space AMX3_PM_RO_SRAM_DATA_SIZE

 ENTRY(am43xx_do_wfi_sz)
 	.word	. - am43xx_do_wfi
	/* SPDX-License-Identifier: GPL-2.0 */
	/*
	* Low level suspend code for AM43XX SoCs
	*
	* Copyright (C) 2013-2018 Texas Instruments Incorporated - http://www.ti.com/
	* Dave Gerlach, Vaibhav Bedia
	*/

	#include <linux/linkage.h>
	#include <linux/ti-emif-sram.h>
	#include <linux/platform_data/pm33xx.h>
	#include <asm/assembler.h>
	#include <asm/hardware/cache-l2x0.h>
	#include <asm/memory.h>

	#include "cm33xx.h"
	#include "common.h"
	#include "iomap.h"
	#include "omap-secure.h"
	#include "omap44xx.h"
	#include "pm-asm-offsets.h"
	#include "prm33xx.h"
	#include "prcm43xx.h"

	/* replicated define because linux/bitops.h cannot be included in assembly */
	#define BIT(nr) (1 << (nr))

	#define AM33XX_CM_CLKCTRL_MODULESTATE_DISABLED 0x00030000
	#define AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE 0x0003
	#define AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE 0x0002

	#define AM43XX_EMIF_POWEROFF_ENABLE 0x1
	#define AM43XX_EMIF_POWEROFF_DISABLE 0x0

	#define AM43XX_CM_CLKSTCTRL_CLKTRCTRL_SW_SLEEP 0x1
	#define AM43XX_CM_CLKSTCTRL_CLKTRCTRL_HW_AUTO 0x3

	#define AM43XX_CM_BASE 0x44DF0000

	#define AM43XX_CM_REGADDR(inst, reg) \
	AM33XX_L4_WK_IO_ADDRESS(AM43XX_CM_BASE + (inst) + (reg))

	#define AM43XX_CM_MPU_CLKSTCTRL AM43XX_CM_REGADDR(AM43XX_CM_MPU_INST, \
	AM43XX_CM_MPU_MPU_CDOFFS)
	#define AM43XX_CM_MPU_MPU_CLKCTRL AM43XX_CM_REGADDR(AM43XX_CM_MPU_INST, \
	AM43XX_CM_MPU_MPU_CLKCTRL_OFFSET)
	#define AM43XX_CM_PER_EMIF_CLKCTRL AM43XX_CM_REGADDR(AM43XX_CM_PER_INST, \
	AM43XX_CM_PER_EMIF_CLKCTRL_OFFSET)
	#define AM43XX_PRM_EMIF_CTRL_OFFSET 0x0030

	#define RTC_SECONDS_REG 0x0
	#define RTC_PMIC_REG 0x98
	#define RTC_PMIC_POWER_EN BIT(16)
	#define RTC_PMIC_EXT_WAKEUP_STS BIT(12)
	#define RTC_PMIC_EXT_WAKEUP_POL BIT(4)
	#define RTC_PMIC_EXT_WAKEUP_EN BIT(0)

	.arm
	.arch armv7-a
	.arch_extension sec
	.align 3

	ENTRY(am43xx_do_wfi)
	stmfd sp!, {r4 - r11, lr} @ save registers on stack

	/* Save wfi_flags arg to data space */
	mov r4, r0
	adr r3, am43xx_pm_ro_sram_data
	ldr r2, [r3, #AMX3_PM_RO_SRAM_DATA_VIRT_OFFSET]
	str r4, [r2, #AMX3_PM_WFI_FLAGS_OFFSET]

	#ifdef CONFIG_CACHE_L2X0
	/* Retrieve l2 cache virt address BEFORE we shut off EMIF */
	ldr r1, get_l2cache_base
	blx r1
	mov r8, r0
	#endif

	/* Only flush cache is we know we are losing MPU context */
	tst r4, #WFI_FLAG_FLUSH_CACHE
	beq cache_skip_flush

	/*
	* Flush all data from the L1 and L2 data cache before disabling
	* SCTLR.C bit.
	*/
	ldr r1, kernel_flush
	blx r1

	/*
	* Clear the SCTLR.C bit to prevent further data cache
	* allocation. Clearing SCTLR.C would make all the data accesses
	* strongly ordered and would not hit the cache.
	*/
	mrc p15, 0, r0, c1, c0, 0
	bic r0, r0, #(1 << 2) @ Disable the C bit
	mcr p15, 0, r0, c1, c0, 0
	isb
	dsb

	/*
	* Invalidate L1 and L2 data cache.
	*/
	ldr r1, kernel_flush
	blx r1

	#ifdef CONFIG_CACHE_L2X0
	/*
	* Clean and invalidate the L2 cache.
	*/
	#ifdef CONFIG_PL310_ERRATA_727915
	mov r0, #0x03
	mov r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX
	dsb
	smc #0
	dsb
	#endif
	mov r0, r8
	adr r4, am43xx_pm_ro_sram_data
	ldr r3, [r4, #AMX3_PM_RO_SRAM_DATA_VIRT_OFFSET]

	mov r2, r0
	ldr r0, [r2, #L2X0_AUX_CTRL]
	str r0, [r3, #AMX3_PM_L2_AUX_CTRL_VAL_OFFSET]
	ldr r0, [r2, #L310_PREFETCH_CTRL]
	str r0, [r3, #AMX3_PM_L2_PREFETCH_CTRL_VAL_OFFSET]

	ldr r0, l2_val
	str r0, [r2, #L2X0_CLEAN_INV_WAY]
	wait:
	ldr r0, [r2, #L2X0_CLEAN_INV_WAY]
	ldr r1, l2_val
	ands r0, r0, r1
	bne wait
	#ifdef CONFIG_PL310_ERRATA_727915
	mov r0, #0x00
	mov r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX
	dsb
	smc #0
	dsb
	#endif
	l2x_sync:
	mov r0, r8
	mov r2, r0
	mov r0, #0x0
	str r0, [r2, #L2X0_CACHE_SYNC]
	sync:
	ldr r0, [r2, #L2X0_CACHE_SYNC]
	ands r0, r0, #0x1
	bne sync
	#endif

	/* Restore wfi_flags */
	adr r3, am43xx_pm_ro_sram_data
	ldr r2, [r3, #AMX3_PM_RO_SRAM_DATA_VIRT_OFFSET]
	ldr r4, [r2, #AMX3_PM_WFI_FLAGS_OFFSET]

	cache_skip_flush:
	/*
	* If we are trying to enter RTC+DDR mode we must perform
	* a read from the rtc address space to ensure translation
	* presence in the TLB to avoid page table walk after DDR
	* is unavailable.
	*/
	tst r4, #WFI_FLAG_RTC_ONLY
	beq skip_rtc_va_refresh

	adr r3, am43xx_pm_ro_sram_data
	ldr r1, [r3, #AMX3_PM_RTC_BASE_VIRT_OFFSET]
	ldr r0, [r1]

	skip_rtc_va_refresh:
	/* Check if we want self refresh */
	tst r4, #WFI_FLAG_SELF_REFRESH
	beq emif_skip_enter_sr

	adr r9, am43xx_emif_sram_table

	ldr r3, [r9, #EMIF_PM_ENTER_SR_OFFSET]
	blx r3

	emif_skip_enter_sr:
	/* Only necessary if PER is losing context */
	tst r4, #WFI_FLAG_SAVE_EMIF
	beq emif_skip_save

	ldr r3, [r9, #EMIF_PM_SAVE_CONTEXT_OFFSET]
	blx r3

	emif_skip_save:
	/* Only can disable EMIF if we have entered self refresh */
	tst r4, #WFI_FLAG_SELF_REFRESH
	beq emif_skip_disable

	/* Disable EMIF */
	ldr r1, am43xx_virt_emif_clkctrl
	ldr r2, [r1]
	bic r2, r2, #AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE
	str r2, [r1]

	wait_emif_disable:
	ldr r2, [r1]
	mov r3, #AM33XX_CM_CLKCTRL_MODULESTATE_DISABLED
	cmp r2, r3
	bne wait_emif_disable

	emif_skip_disable:
	tst r4, #WFI_FLAG_RTC_ONLY
	beq skip_rtc_only

	adr r3, am43xx_pm_ro_sram_data
	ldr r1, [r3, #AMX3_PM_RTC_BASE_VIRT_OFFSET]

	ldr r0, [r1, #RTC_PMIC_REG]
	orr r0, r0, #RTC_PMIC_POWER_EN
	orr r0, r0, #RTC_PMIC_EXT_WAKEUP_STS
	orr r0, r0, #RTC_PMIC_EXT_WAKEUP_EN
	orr r0, r0, #RTC_PMIC_EXT_WAKEUP_POL
	str r0, [r1, #RTC_PMIC_REG]
	ldr r0, [r1, #RTC_PMIC_REG]
	/* Wait for 2 seconds to lose power */
	mov r3, #2
	ldr r2, [r1, #RTC_SECONDS_REG]
	rtc_loop:
	ldr r0, [r1, #RTC_SECONDS_REG]
	cmp r0, r2
	beq rtc_loop
	mov r2, r0
	subs r3, r3, #1
	bne rtc_loop

	b re_enable_emif

	skip_rtc_only:

	tst r4, #WFI_FLAG_WAKE_M3
	beq wkup_m3_skip

	/*
	* For the MPU WFI to be registered as an interrupt
	* to WKUP_M3, MPU_CLKCTRL.MODULEMODE needs to be set
	* to DISABLED
	*/
	ldr r1, am43xx_virt_mpu_clkctrl
	ldr r2, [r1]
	bic r2, r2, #AM33XX_CM_CLKCTRL_MODULEMODE_DISABLE
	str r2, [r1]

	/*
	* Put MPU CLKDM to SW_SLEEP
	*/
	ldr r1, am43xx_virt_mpu_clkstctrl
	mov r2, #AM43XX_CM_CLKSTCTRL_CLKTRCTRL_SW_SLEEP
	str r2, [r1]

	wkup_m3_skip:
	/*
	* Execute a barrier instruction to ensure that all cache,
	* TLB and branch predictor maintenance operations issued
	* have completed.
	*/
	dsb
	dmb

	/*
	* Execute a WFI instruction and wait until the
	* STANDBYWFI output is asserted to indicate that the
	* CPU is in idle and low power state. CPU can specualatively
	* prefetch the instructions so add NOPs after WFI. Sixteen
	* NOPs as per Cortex-A9 pipeline.
	*/
	wfi

	nop
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	nop
	nop

	/* We come here in case of an abort due to a late interrupt */
	ldr r1, am43xx_virt_mpu_clkstctrl
	mov r2, #AM43XX_CM_CLKSTCTRL_CLKTRCTRL_HW_AUTO
	str r2, [r1]

	/* Set MPU_CLKCTRL.MODULEMODE back to ENABLE */
	ldr r1, am43xx_virt_mpu_clkctrl
	mov r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
	str r2, [r1]

	re_enable_emif:
	/* Re-enable EMIF */
	ldr r1, am43xx_virt_emif_clkctrl
	mov r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
	str r2, [r1]
	wait_emif_enable:
	ldr r3, [r1]
	cmp r2, r3
	bne wait_emif_enable

	tst r4, #WFI_FLAG_FLUSH_CACHE
	beq cache_skip_restore

	/*
	* Set SCTLR.C bit to allow data cache allocation
	*/
	mrc p15, 0, r0, c1, c0, 0
	orr r0, r0, #(1 << 2) @ Enable the C bit
	mcr p15, 0, r0, c1, c0, 0
	isb

	cache_skip_restore:
	/* Only necessary if PER is losing context */
	tst r4, #WFI_FLAG_SELF_REFRESH
	beq emif_skip_exit_sr_abt

	adr r9, am43xx_emif_sram_table
	ldr r1, [r9, #EMIF_PM_ABORT_SR_OFFSET]
	blx r1

	emif_skip_exit_sr_abt:
	/* Let the suspend code know about the abort */
	mov r0, #1
	ldmfd sp!, {r4 - r11, pc} @ restore regs and return
	ENDPROC(am43xx_do_wfi)

	.align
	ENTRY(am43xx_resume_offset)
	.word . - am43xx_do_wfi

	ENTRY(am43xx_resume_from_deep_sleep)
	/* Set MPU CLKSTCTRL to HW AUTO so that CPUidle works properly */
	ldr r1, am43xx_virt_mpu_clkstctrl
	mov r2, #AM43XX_CM_CLKSTCTRL_CLKTRCTRL_HW_AUTO
	str r2, [r1]

	/* For AM43xx, use EMIF power down until context is restored */
	ldr r2, am43xx_phys_emif_poweroff
	mov r1, #AM43XX_EMIF_POWEROFF_ENABLE
	str r1, [r2, #0x0]

	/* Re-enable EMIF */
	ldr r1, am43xx_phys_emif_clkctrl
	mov r2, #AM33XX_CM_CLKCTRL_MODULEMODE_ENABLE
	str r2, [r1]
	wait_emif_enable1:
	ldr r3, [r1]
	cmp r2, r3
	bne wait_emif_enable1

	adr r9, am43xx_emif_sram_table

	ldr r1, [r9, #EMIF_PM_RESTORE_CONTEXT_OFFSET]
	blx r1

	ldr r1, [r9, #EMIF_PM_EXIT_SR_OFFSET]
	blx r1

	ldr r2, am43xx_phys_emif_poweroff
	mov r1, #AM43XX_EMIF_POWEROFF_DISABLE
	str r1, [r2, #0x0]

	ldr r1, [r9, #EMIF_PM_RUN_HW_LEVELING]
	blx r1

	#ifdef CONFIG_CACHE_L2X0
	ldr r2, l2_cache_base
	ldr r0, [r2, #L2X0_CTRL]
	and r0, #0x0f
	cmp r0, #1
	beq skip_l2en @ Skip if already enabled

	adr r4, am43xx_pm_ro_sram_data
	ldr r3, [r4, #AMX3_PM_RO_SRAM_DATA_PHYS_OFFSET]
	ldr r0, [r3, #AMX3_PM_L2_PREFETCH_CTRL_VAL_OFFSET]

	ldr r12, l2_smc1
	dsb
	smc #0
	dsb
	set_aux_ctrl:
	ldr r0, [r3, #AMX3_PM_L2_AUX_CTRL_VAL_OFFSET]
	ldr r12, l2_smc2
	dsb
	smc #0
	dsb

	/* L2 invalidate on resume */
	ldr r0, l2_val
	ldr r2, l2_cache_base
	str r0, [r2, #L2X0_INV_WAY]
	wait2:
	ldr r0, [r2, #L2X0_INV_WAY]
	ldr r1, l2_val
	ands r0, r0, r1
	bne wait2
	#ifdef CONFIG_PL310_ERRATA_727915
	mov r0, #0x00
	mov r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX
	dsb
	smc #0
	dsb
	#endif
	l2x_sync2:
	ldr r2, l2_cache_base
	mov r0, #0x0
	str r0, [r2, #L2X0_CACHE_SYNC]
	sync2:
	ldr r0, [r2, #L2X0_CACHE_SYNC]
	ands r0, r0, #0x1
	bne sync2

	mov r0, #0x1
	ldr r12, l2_smc3
	dsb
	smc #0
	dsb
	#endif
	skip_l2en:
	/* We are back. Branch to the common CPU resume routine */
	mov r0, #0
	ldr pc, resume_addr
	ENDPROC(am43xx_resume_from_deep_sleep)

	/*
	* Local variables
	*/
	.align
	kernel_flush:
	.word v7_flush_dcache_all
	ddr_start:
	.word PAGE_OFFSET

	am43xx_phys_emif_poweroff:
	.word (AM43XX_CM_BASE + AM43XX_PRM_DEVICE_INST + \
	AM43XX_PRM_EMIF_CTRL_OFFSET)
	am43xx_virt_mpu_clkstctrl:
	.word (AM43XX_CM_MPU_CLKSTCTRL)
	am43xx_virt_mpu_clkctrl:
	.word (AM43XX_CM_MPU_MPU_CLKCTRL)
	am43xx_virt_emif_clkctrl:
	.word (AM43XX_CM_PER_EMIF_CLKCTRL)
	am43xx_phys_emif_clkctrl:
	.word (AM43XX_CM_BASE + AM43XX_CM_PER_INST + \
	AM43XX_CM_PER_EMIF_CLKCTRL_OFFSET)

	#ifdef CONFIG_CACHE_L2X0
	/* L2 cache related defines for AM437x */
	get_l2cache_base:
	.word omap4_get_l2cache_base
	l2_cache_base:
	.word OMAP44XX_L2CACHE_BASE
	l2_smc1:
	.word OMAP4_MON_L2X0_PREFETCH_INDEX
	l2_smc2:
	.word OMAP4_MON_L2X0_AUXCTRL_INDEX
	l2_smc3:
	.word OMAP4_MON_L2X0_CTRL_INDEX
	l2_val:
	.word 0xffff
	#endif

	.align 3
	/* DDR related defines */
	ENTRY(am43xx_emif_sram_table)
	.space EMIF_PM_FUNCTIONS_SIZE

	ENTRY(am43xx_pm_sram)
	.word am43xx_do_wfi
	.word am43xx_do_wfi_sz
	.word am43xx_resume_offset
	.word am43xx_emif_sram_table
	.word am43xx_pm_ro_sram_data

	resume_addr:
	.word cpu_resume - PAGE_OFFSET + 0x80000000
	.align 3

	ENTRY(am43xx_pm_ro_sram_data)
	.space AMX3_PM_RO_SRAM_DATA_SIZE

	ENTRY(am43xx_do_wfi_sz)
	.word . - am43xx_do_wfi