blob: 28811aff2c5ad5bbf9acc48e06d49f50374d36f3 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/bridge/ps8640.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MIPI DSI to eDP Video Format Converter
maintainers:
- Nicolas Boichat <drinkcat@chromium.org>
description: |
The PS8640 is a low power MIPI-to-eDP video format converter supporting
mobile devices with embedded panel resolutions up to 2048 x 1536. The
device accepts a single channel of MIPI DSI v1.1, with up to four lanes
plus clock, at a transmission rate up to 1.5Gbit/sec per lane. The
device outputs eDP v1.4, one or two lanes, at a link rate of up to
3.24Gbit/sec per lane.
properties:
compatible:
const: parade,ps8640
reg:
maxItems: 1
description: Base I2C address of the device.
powerdown-gpios:
maxItems: 1
description: GPIO connected to active low powerdown.
reset-gpios:
maxItems: 1
description: GPIO connected to active low reset.
vdd12-supply:
description: Regulator for 1.2V digital core power.
vdd33-supply:
description: Regulator for 3.3V digital core power.
aux-bus:
$ref: /schemas/display/dp-aux-bus.yaml#
ports:
$ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
$ref: /schemas/graph.yaml#/properties/port
description:
Video port for DSI input
port@1:
$ref: /schemas/graph.yaml#/properties/port
description:
Video port for eDP output (panel or connector).
required:
- port@0
required:
- compatible
- reg
- powerdown-gpios
- reset-gpios
- vdd12-supply
- vdd33-supply
- ports
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
i2c0 {
#address-cells = <1>;
#size-cells = <0>;
ps8640: edp-bridge@18 {
compatible = "parade,ps8640";
reg = <0x18>;
powerdown-gpios = <&pio 116 GPIO_ACTIVE_LOW>;
reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>;
vdd12-supply = <&ps8640_fixed_1v2>;
vdd33-supply = <&mt6397_vgp2_reg>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
ps8640_in: endpoint {
remote-endpoint = <&dsi0_out>;
};
};
port@1 {
reg = <1>;
ps8640_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
aux-bus {
panel {
compatible = "boe,nv133fhm-n62";
power-supply = <&pp3300_dx_edp>;
backlight = <&backlight>;
port {
panel_in: endpoint {
remote-endpoint = <&ps8640_out>;
};
};
};
};
};
};