Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.yaml

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra20-pinmux.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: NVIDIA Tegra20 Pinmux Controller

maintainers:
  - Thierry Reding <thierry.reding@gmail.com>
  - Jon Hunter <jonathanh@nvidia.com>

properties:
  compatible:
    const: nvidia,tegra20-pinmux

  reg:
    items:
      - description: tri-state registers
      - description: mux register
      - description: pull-up/down registers
      - description: pad control registers

patternProperties:
  "^pinmux(-[a-z0-9-_]+)?$":
    type: object
    properties:
      phandle: true

    # pin groups
    additionalProperties:
      $ref: nvidia,tegra-pinmux-common.yaml
      additionalProperties: false
      properties:
        nvidia,pins:
          items:
            enum: [ ata, atb, atc, atd, ate, cdev1, cdev2, crtp, csus, dap1,
                    dap2, dap3, dap4, ddc, dta, dtb, dtc, dtd, dte, dtf, gma,
                    gmb, gmc, gmd, gme, gpu, gpu7, gpv, hdint, i2cp, irrx,
                    irtx, kbca, kbcb, kbcc, kbcd, kbce, kbcf, lcsn, ld0, ld1,
                    ld2, ld3, ld4, ld5, ld6, ld7, ld8, ld9, ld10, ld11, ld12,
                    ld13, ld14, ld15, ld16, ld17, ldc, ldi, lhp0, lhp1, lhp2,
                    lhs, lm0, lm1, lpp, lpw0, lpw1, lpw2, lsc0, lsc1, lsck,
                    lsda, lsdi, lspi, lvp0, lvp1, lvs, owc, pmc, pta, rm, sdb,
                    sdc, sdd, sdio1, slxa, slxc, slxd, slxk, spdi, spdo, spia,
                    spib, spic, spid, spie, spif, spig, spih, uaa, uab, uac,
                    uad, uca, ucb, uda,
                    # tristate groups
                    ck32, ddrc, pmca, pmcb, pmcc, pmcd, pmce, xm2c, xm2d, ls,
                    lc, ld17_0, ld19_18, ld21_20, ld23_22,
                    # drive groups
                    drive_ao1, drive_ao2, drive_at1, drive_at2, drive_cdev1,
                    drive_cdev2, drive_csus, drive_dap1, drive_dap2,
                    drive_dap3, drive_dap4, drive_dbg, drive_lcd1, drive_lcd2,
                    drive_sdmmc2, drive_sdmmc3, drive_spi, drive_uaa,
                    drive_uab, drive_uart2, drive_uart3, drive_vi1, drive_vi2,
                    drive_xm2a, drive_xm2c, drive_xm2d, drive_xm2clk,
                    drive_sdio1, drive_crt, drive_ddc, drive_gma, drive_gmb,
                    drive_gmc, drive_gmd, drive_gme, drive_owr, drive_uda ]

        nvidia,function:
          enum: [ ahb_clk, apb_clk, audio_sync, crt, dap1, dap2, dap3, dap4,
                  dap5, displaya, displayb, emc_test0_dll, emc_test1_dll, gmi,
                  gmi_int, hdmi, i2cp, i2c1, i2c2, i2c3, ide, irda, kbc, mio,
                  mipi_hs, nand, osc, owr, pcie, plla_out, pllc_out1,
                  pllm_out1, pllp_out2, pllp_out3, pllp_out4, pwm, pwr_intr,
                  pwr_on, rsvd1, rsvd2, rsvd3, rsvd4, rtck, sdio1, sdio2,
                  sdio3, sdio4, sflash, spdif, spi1, spi2, spi2_alt, spi3,
                  spi4, trace, twc, uarta, uartb, uartc, uartd, uarte, ulpi,
                  vi, vi_sensor_clk, xio ]

        nvidia,pull: true
        nvidia,tristate: true
        nvidia,schmitt: true
        nvidia,pull-down-strength: true
        nvidia,pull-up-strength: true
        nvidia,high-speed-mode: true
        nvidia,low-power-mode: true
        nvidia,slew-rate-rising: true
        nvidia,slew-rate-falling: true

      required:
        - nvidia,pins

additionalProperties: false

required:
  - compatible
  - reg

examples:
  - |
    #include <dt-bindings/clock/tegra20-car.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>

    pinctrl@70000000 {
        compatible = "nvidia,tegra20-pinmux";
        reg = <0x70000014 0x10>, /* Tri-state registers */
              <0x70000080 0x20>, /* Mux registers */
              <0x700000a0 0x14>, /* Pull-up/down registers */
              <0x70000868 0xa8>; /* Pad control registers */

        pinmux {
            atb {
                nvidia,pins = "atb", "gma", "gme";
                nvidia,function = "sdio4";
                nvidia,pull = <0>;
                nvidia,tristate = <0>;
            };
        };
    };
...