| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2014, The Linux Foundation. All rights reserved. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/device.h> |
| #include <linux/io.h> |
| #include <linux/err.h> |
| #include <linux/fs.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/smp.h> |
| #include <linux/sysfs.h> |
| #include <linux/stat.h> |
| #include <linux/clk.h> |
| #include <linux/cpu.h> |
| #include <linux/cpu_pm.h> |
| #include <linux/coresight.h> |
| #include <linux/coresight-pmu.h> |
| #include <linux/pm_wakeup.h> |
| #include <linux/amba/bus.h> |
| #include <linux/seq_file.h> |
| #include <linux/uaccess.h> |
| #include <linux/perf_event.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/property.h> |
| #include <asm/sections.h> |
| #include <asm/local.h> |
| #include <asm/virt.h> |
| |
| #include "coresight-etm4x.h" |
| #include "coresight-etm-perf.h" |
| |
| static int boot_enable; |
| module_param(boot_enable, int, 0444); |
| MODULE_PARM_DESC(boot_enable, "Enable tracing on boot"); |
| |
| #define PARAM_PM_SAVE_FIRMWARE 0 /* save self-hosted state as per firmware */ |
| #define PARAM_PM_SAVE_NEVER 1 /* never save any state */ |
| #define PARAM_PM_SAVE_SELF_HOSTED 2 /* save self-hosted state only */ |
| |
| static int pm_save_enable = PARAM_PM_SAVE_FIRMWARE; |
| module_param(pm_save_enable, int, 0444); |
| MODULE_PARM_DESC(pm_save_enable, |
| "Save/restore state on power down: 1 = never, 2 = self-hosted"); |
| |
| /* The number of ETMv4 currently registered */ |
| static int etm4_count; |
| static struct etmv4_drvdata *etmdrvdata[NR_CPUS]; |
| static void etm4_set_default_config(struct etmv4_config *config); |
| static int etm4_set_event_filters(struct etmv4_drvdata *drvdata, |
| struct perf_event *event); |
| |
| static enum cpuhp_state hp_online; |
| |
| static void etm4_os_unlock(struct etmv4_drvdata *drvdata) |
| { |
| /* Writing 0 to TRCOSLAR unlocks the trace registers */ |
| writel_relaxed(0x0, drvdata->base + TRCOSLAR); |
| drvdata->os_unlock = true; |
| isb(); |
| } |
| |
| static void etm4_os_lock(struct etmv4_drvdata *drvdata) |
| { |
| /* Writing 0x1 to TRCOSLAR locks the trace registers */ |
| writel_relaxed(0x1, drvdata->base + TRCOSLAR); |
| drvdata->os_unlock = false; |
| isb(); |
| } |
| |
| static bool etm4_arch_supported(u8 arch) |
| { |
| /* Mask out the minor version number */ |
| switch (arch & 0xf0) { |
| case ETM_ARCH_V4: |
| break; |
| default: |
| return false; |
| } |
| return true; |
| } |
| |
| static int etm4_cpu_id(struct coresight_device *csdev) |
| { |
| struct etmv4_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); |
| |
| return drvdata->cpu; |
| } |
| |
| static int etm4_trace_id(struct coresight_device *csdev) |
| { |
| struct etmv4_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); |
| |
| return drvdata->trcid; |
| } |
| |
| struct etm4_enable_arg { |
| struct etmv4_drvdata *drvdata; |
| int rc; |
| }; |
| |
| static int etm4_enable_hw(struct etmv4_drvdata *drvdata) |
| { |
| int i, rc; |
| struct etmv4_config *config = &drvdata->config; |
| struct device *etm_dev = &drvdata->csdev->dev; |
| |
| CS_UNLOCK(drvdata->base); |
| |
| etm4_os_unlock(drvdata); |
| |
| rc = coresight_claim_device_unlocked(drvdata->base); |
| if (rc) |
| goto done; |
| |
| /* Disable the trace unit before programming trace registers */ |
| writel_relaxed(0, drvdata->base + TRCPRGCTLR); |
| |
| /* wait for TRCSTATR.IDLE to go up */ |
| if (coresight_timeout(drvdata->base, TRCSTATR, TRCSTATR_IDLE_BIT, 1)) |
| dev_err(etm_dev, |
| "timeout while waiting for Idle Trace Status\n"); |
| |
| writel_relaxed(config->pe_sel, drvdata->base + TRCPROCSELR); |
| writel_relaxed(config->cfg, drvdata->base + TRCCONFIGR); |
| /* nothing specific implemented */ |
| writel_relaxed(0x0, drvdata->base + TRCAUXCTLR); |
| writel_relaxed(config->eventctrl0, drvdata->base + TRCEVENTCTL0R); |
| writel_relaxed(config->eventctrl1, drvdata->base + TRCEVENTCTL1R); |
| writel_relaxed(config->stall_ctrl, drvdata->base + TRCSTALLCTLR); |
| writel_relaxed(config->ts_ctrl, drvdata->base + TRCTSCTLR); |
| writel_relaxed(config->syncfreq, drvdata->base + TRCSYNCPR); |
| writel_relaxed(config->ccctlr, drvdata->base + TRCCCCTLR); |
| writel_relaxed(config->bb_ctrl, drvdata->base + TRCBBCTLR); |
| writel_relaxed(drvdata->trcid, drvdata->base + TRCTRACEIDR); |
| writel_relaxed(config->vinst_ctrl, drvdata->base + TRCVICTLR); |
| writel_relaxed(config->viiectlr, drvdata->base + TRCVIIECTLR); |
| writel_relaxed(config->vissctlr, |
| drvdata->base + TRCVISSCTLR); |
| writel_relaxed(config->vipcssctlr, |
| drvdata->base + TRCVIPCSSCTLR); |
| for (i = 0; i < drvdata->nrseqstate - 1; i++) |
| writel_relaxed(config->seq_ctrl[i], |
| drvdata->base + TRCSEQEVRn(i)); |
| writel_relaxed(config->seq_rst, drvdata->base + TRCSEQRSTEVR); |
| writel_relaxed(config->seq_state, drvdata->base + TRCSEQSTR); |
| writel_relaxed(config->ext_inp, drvdata->base + TRCEXTINSELR); |
| for (i = 0; i < drvdata->nr_cntr; i++) { |
| writel_relaxed(config->cntrldvr[i], |
| drvdata->base + TRCCNTRLDVRn(i)); |
| writel_relaxed(config->cntr_ctrl[i], |
| drvdata->base + TRCCNTCTLRn(i)); |
| writel_relaxed(config->cntr_val[i], |
| drvdata->base + TRCCNTVRn(i)); |
| } |
| |
| /* |
| * Resource selector pair 0 is always implemented and reserved. As |
| * such start at 2. |
| */ |
| for (i = 2; i < drvdata->nr_resource * 2; i++) |
| writel_relaxed(config->res_ctrl[i], |
| drvdata->base + TRCRSCTLRn(i)); |
| |
| for (i = 0; i < drvdata->nr_ss_cmp; i++) { |
| /* always clear status bit on restart if using single-shot */ |
| if (config->ss_ctrl[i] || config->ss_pe_cmp[i]) |
| config->ss_status[i] &= ~BIT(31); |
| writel_relaxed(config->ss_ctrl[i], |
| drvdata->base + TRCSSCCRn(i)); |
| writel_relaxed(config->ss_status[i], |
| drvdata->base + TRCSSCSRn(i)); |
| writel_relaxed(config->ss_pe_cmp[i], |
| drvdata->base + TRCSSPCICRn(i)); |
| } |
| for (i = 0; i < drvdata->nr_addr_cmp; i++) { |
| writeq_relaxed(config->addr_val[i], |
| drvdata->base + TRCACVRn(i)); |
| writeq_relaxed(config->addr_acc[i], |
| drvdata->base + TRCACATRn(i)); |
| } |
| for (i = 0; i < drvdata->numcidc; i++) |
| writeq_relaxed(config->ctxid_pid[i], |
| drvdata->base + TRCCIDCVRn(i)); |
| writel_relaxed(config->ctxid_mask0, drvdata->base + TRCCIDCCTLR0); |
| writel_relaxed(config->ctxid_mask1, drvdata->base + TRCCIDCCTLR1); |
| |
| for (i = 0; i < drvdata->numvmidc; i++) |
| writeq_relaxed(config->vmid_val[i], |
| drvdata->base + TRCVMIDCVRn(i)); |
| writel_relaxed(config->vmid_mask0, drvdata->base + TRCVMIDCCTLR0); |
| writel_relaxed(config->vmid_mask1, drvdata->base + TRCVMIDCCTLR1); |
| |
| /* |
| * Request to keep the trace unit powered and also |
| * emulation of powerdown |
| */ |
| writel_relaxed(readl_relaxed(drvdata->base + TRCPDCR) | TRCPDCR_PU, |
| drvdata->base + TRCPDCR); |
| |
| /* Enable the trace unit */ |
| writel_relaxed(1, drvdata->base + TRCPRGCTLR); |
| |
| /* wait for TRCSTATR.IDLE to go back down to '0' */ |
| if (coresight_timeout(drvdata->base, TRCSTATR, TRCSTATR_IDLE_BIT, 0)) |
| dev_err(etm_dev, |
| "timeout while waiting for Idle Trace Status\n"); |
| |
| /* |
| * As recommended by section 4.3.7 ("Synchronization when using the |
| * memory-mapped interface") of ARM IHI 0064D |
| */ |
| dsb(sy); |
| isb(); |
| |
| done: |
| CS_LOCK(drvdata->base); |
| |
| dev_dbg(etm_dev, "cpu: %d enable smp call done: %d\n", |
| drvdata->cpu, rc); |
| return rc; |
| } |
| |
| static void etm4_enable_hw_smp_call(void *info) |
| { |
| struct etm4_enable_arg *arg = info; |
| |
| if (WARN_ON(!arg)) |
| return; |
| arg->rc = etm4_enable_hw(arg->drvdata); |
| } |
| |
| /* |
| * The goal of function etm4_config_timestamp_event() is to configure a |
| * counter that will tell the tracer to emit a timestamp packet when it |
| * reaches zero. This is done in order to get a more fine grained idea |
| * of when instructions are executed so that they can be correlated |
| * with execution on other CPUs. |
| * |
| * To do this the counter itself is configured to self reload and |
| * TRCRSCTLR1 (always true) used to get the counter to decrement. From |
| * there a resource selector is configured with the counter and the |
| * timestamp control register to use the resource selector to trigger the |
| * event that will insert a timestamp packet in the stream. |
| */ |
| static int etm4_config_timestamp_event(struct etmv4_drvdata *drvdata) |
| { |
| int ctridx, ret = -EINVAL; |
| int counter, rselector; |
| u32 val = 0; |
| struct etmv4_config *config = &drvdata->config; |
| |
| /* No point in trying if we don't have at least one counter */ |
| if (!drvdata->nr_cntr) |
| goto out; |
| |
| /* Find a counter that hasn't been initialised */ |
| for (ctridx = 0; ctridx < drvdata->nr_cntr; ctridx++) |
| if (config->cntr_val[ctridx] == 0) |
| break; |
| |
| /* All the counters have been configured already, bail out */ |
| if (ctridx == drvdata->nr_cntr) { |
| pr_debug("%s: no available counter found\n", __func__); |
| ret = -ENOSPC; |
| goto out; |
| } |
| |
| /* |
| * Searching for an available resource selector to use, starting at |
| * '2' since every implementation has at least 2 resource selector. |
| * ETMIDR4 gives the number of resource selector _pairs_, |
| * hence multiply by 2. |
| */ |
| for (rselector = 2; rselector < drvdata->nr_resource * 2; rselector++) |
| if (!config->res_ctrl[rselector]) |
| break; |
| |
| if (rselector == drvdata->nr_resource * 2) { |
| pr_debug("%s: no available resource selector found\n", |
| __func__); |
| ret = -ENOSPC; |
| goto out; |
| } |
| |
| /* Remember what counter we used */ |
| counter = 1 << ctridx; |
| |
| /* |
| * Initialise original and reload counter value to the smallest |
| * possible value in order to get as much precision as we can. |
| */ |
| config->cntr_val[ctridx] = 1; |
| config->cntrldvr[ctridx] = 1; |
| |
| /* Set the trace counter control register */ |
| val = 0x1 << 16 | /* Bit 16, reload counter automatically */ |
| 0x0 << 7 | /* Select single resource selector */ |
| 0x1; /* Resource selector 1, i.e always true */ |
| |
| config->cntr_ctrl[ctridx] = val; |
| |
| val = 0x2 << 16 | /* Group 0b0010 - Counter and sequencers */ |
| counter << 0; /* Counter to use */ |
| |
| config->res_ctrl[rselector] = val; |
| |
| val = 0x0 << 7 | /* Select single resource selector */ |
| rselector; /* Resource selector */ |
| |
| config->ts_ctrl = val; |
| |
| ret = 0; |
| out: |
| return ret; |
| } |
| |
| static int etm4_parse_event_config(struct etmv4_drvdata *drvdata, |
| struct perf_event *event) |
| { |
| int ret = 0; |
| struct etmv4_config *config = &drvdata->config; |
| struct perf_event_attr *attr = &event->attr; |
| |
| if (!attr) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| /* Clear configuration from previous run */ |
| memset(config, 0, sizeof(struct etmv4_config)); |
| |
| if (attr->exclude_kernel) |
| config->mode = ETM_MODE_EXCL_KERN; |
| |
| if (attr->exclude_user) |
| config->mode = ETM_MODE_EXCL_USER; |
| |
| /* Always start from the default config */ |
| etm4_set_default_config(config); |
| |
| /* Configure filters specified on the perf cmd line, if any. */ |
| ret = etm4_set_event_filters(drvdata, event); |
| if (ret) |
| goto out; |
| |
| /* Go from generic option to ETMv4 specifics */ |
| if (attr->config & BIT(ETM_OPT_CYCACC)) { |
| config->cfg |= BIT(4); |
| /* TRM: Must program this for cycacc to work */ |
| config->ccctlr = ETM_CYC_THRESHOLD_DEFAULT; |
| } |
| if (attr->config & BIT(ETM_OPT_TS)) { |
| /* |
| * Configure timestamps to be emitted at regular intervals in |
| * order to correlate instructions executed on different CPUs |
| * (CPU-wide trace scenarios). |
| */ |
| ret = etm4_config_timestamp_event(drvdata); |
| |
| /* |
| * No need to go further if timestamp intervals can't |
| * be configured. |
| */ |
| if (ret) |
| goto out; |
| |
| /* bit[11], Global timestamp tracing bit */ |
| config->cfg |= BIT(11); |
| } |
| |
| if (attr->config & BIT(ETM_OPT_CTXTID)) |
| /* bit[6], Context ID tracing bit */ |
| config->cfg |= BIT(ETM4_CFG_BIT_CTXTID); |
| |
| /* return stack - enable if selected and supported */ |
| if ((attr->config & BIT(ETM_OPT_RETSTK)) && drvdata->retstack) |
| /* bit[12], Return stack enable bit */ |
| config->cfg |= BIT(12); |
| |
| out: |
| return ret; |
| } |
| |
| static int etm4_enable_perf(struct coresight_device *csdev, |
| struct perf_event *event) |
| { |
| int ret = 0; |
| struct etmv4_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); |
| |
| if (WARN_ON_ONCE(drvdata->cpu != smp_processor_id())) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| /* Configure the tracer based on the session's specifics */ |
| ret = etm4_parse_event_config(drvdata, event); |
| if (ret) |
| goto out; |
| /* And enable it */ |
| ret = etm4_enable_hw(drvdata); |
| |
| out: |
| return ret; |
| } |
| |
| static int etm4_enable_sysfs(struct coresight_device *csdev) |
| { |
| struct etmv4_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); |
| struct etm4_enable_arg arg = { }; |
| int ret; |
| |
| spin_lock(&drvdata->spinlock); |
| |
| /* |
| * Executing etm4_enable_hw on the cpu whose ETM is being enabled |
| * ensures that register writes occur when cpu is powered. |
| */ |
| arg.drvdata = drvdata; |
| ret = smp_call_function_single(drvdata->cpu, |
| etm4_enable_hw_smp_call, &arg, 1); |
| if (!ret) |
| ret = arg.rc; |
| if (!ret) |
| drvdata->sticky_enable = true; |
| spin_unlock(&drvdata->spinlock); |
| |
| if (!ret) |
| dev_dbg(&csdev->dev, "ETM tracing enabled\n"); |
| return ret; |
| } |
| |
| static int etm4_enable(struct coresight_device *csdev, |
| struct perf_event *event, u32 mode) |
| { |
| int ret; |
| u32 val; |
| struct etmv4_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); |
| |
| val = local_cmpxchg(&drvdata->mode, CS_MODE_DISABLED, mode); |
| |
| /* Someone is already using the tracer */ |
| if (val) |
| return -EBUSY; |
| |
| switch (mode) { |
| case CS_MODE_SYSFS: |
| ret = etm4_enable_sysfs(csdev); |
| break; |
| case CS_MODE_PERF: |
| ret = etm4_enable_perf(csdev, event); |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| /* The tracer didn't start */ |
| if (ret) |
| local_set(&drvdata->mode, CS_MODE_DISABLED); |
| |
| return ret; |
| } |
| |
| static void etm4_disable_hw(void *info) |
| { |
| u32 control; |
| struct etmv4_drvdata *drvdata = info; |
| struct etmv4_config *config = &drvdata->config; |
| struct device *etm_dev = &drvdata->csdev->dev; |
| int i; |
| |
| CS_UNLOCK(drvdata->base); |
| |
| /* power can be removed from the trace unit now */ |
| control = readl_relaxed(drvdata->base + TRCPDCR); |
| control &= ~TRCPDCR_PU; |
| writel_relaxed(control, drvdata->base + TRCPDCR); |
| |
| control = readl_relaxed(drvdata->base + TRCPRGCTLR); |
| |
| /* EN, bit[0] Trace unit enable bit */ |
| control &= ~0x1; |
| |
| /* |
| * Make sure everything completes before disabling, as recommended |
| * by section 7.3.77 ("TRCVICTLR, ViewInst Main Control Register, |
| * SSTATUS") of ARM IHI 0064D |
| */ |
| dsb(sy); |
| isb(); |
| writel_relaxed(control, drvdata->base + TRCPRGCTLR); |
| |
| /* wait for TRCSTATR.PMSTABLE to go to '1' */ |
| if (coresight_timeout(drvdata->base, TRCSTATR, |
| TRCSTATR_PMSTABLE_BIT, 1)) |
| dev_err(etm_dev, |
| "timeout while waiting for PM stable Trace Status\n"); |
| |
| /* read the status of the single shot comparators */ |
| for (i = 0; i < drvdata->nr_ss_cmp; i++) { |
| config->ss_status[i] = |
| readl_relaxed(drvdata->base + TRCSSCSRn(i)); |
| } |
| |
| coresight_disclaim_device_unlocked(drvdata->base); |
| |
| CS_LOCK(drvdata->base); |
| |
| dev_dbg(&drvdata->csdev->dev, |
| "cpu: %d disable smp call done\n", drvdata->cpu); |
| } |
| |
| static int etm4_disable_perf(struct coresight_device *csdev, |
| struct perf_event *event) |
| { |
| u32 control; |
| struct etm_filters *filters = event->hw.addr_filters; |
| struct etmv4_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); |
| |
| if (WARN_ON_ONCE(drvdata->cpu != smp_processor_id())) |
| return -EINVAL; |
| |
| etm4_disable_hw(drvdata); |
| |
| /* |
| * Check if the start/stop logic was active when the unit was stopped. |
| * That way we can re-enable the start/stop logic when the process is |
| * scheduled again. Configuration of the start/stop logic happens in |
| * function etm4_set_event_filters(). |
| */ |
| control = readl_relaxed(drvdata->base + TRCVICTLR); |
| /* TRCVICTLR::SSSTATUS, bit[9] */ |
| filters->ssstatus = (control & BIT(9)); |
| |
| return 0; |
| } |
| |
| static void etm4_disable_sysfs(struct coresight_device *csdev) |
| { |
| struct etmv4_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); |
| |
| /* |
| * Taking hotplug lock here protects from clocks getting disabled |
| * with tracing being left on (crash scenario) if user disable occurs |
| * after cpu online mask indicates the cpu is offline but before the |
| * DYING hotplug callback is serviced by the ETM driver. |
| */ |
| cpus_read_lock(); |
| spin_lock(&drvdata->spinlock); |
| |
| /* |
| * Executing etm4_disable_hw on the cpu whose ETM is being disabled |
| * ensures that register writes occur when cpu is powered. |
| */ |
| smp_call_function_single(drvdata->cpu, etm4_disable_hw, drvdata, 1); |
| |
| spin_unlock(&drvdata->spinlock); |
| cpus_read_unlock(); |
| |
| dev_dbg(&csdev->dev, "ETM tracing disabled\n"); |
| } |
| |
| static void etm4_disable(struct coresight_device *csdev, |
| struct perf_event *event) |
| { |
| u32 mode; |
| struct etmv4_drvdata *drvdata = dev_get_drvdata(csdev->dev.parent); |
| |
| /* |
| * For as long as the tracer isn't disabled another entity can't |
| * change its status. As such we can read the status here without |
| * fearing it will change under us. |
| */ |
| mode = local_read(&drvdata->mode); |
| |
| switch (mode) { |
| case CS_MODE_DISABLED: |
| break; |
| case CS_MODE_SYSFS: |
| etm4_disable_sysfs(csdev); |
| break; |
| case CS_MODE_PERF: |
| etm4_disable_perf(csdev, event); |
| break; |
| } |
| |
| if (mode) |
| local_set(&drvdata->mode, CS_MODE_DISABLED); |
| } |
| |
| static const struct coresight_ops_source etm4_source_ops = { |
| .cpu_id = etm4_cpu_id, |
| .trace_id = etm4_trace_id, |
| .enable = etm4_enable, |
| .disable = etm4_disable, |
| }; |
| |
| static const struct coresight_ops etm4_cs_ops = { |
| .source_ops = &etm4_source_ops, |
| }; |
| |
| static void etm4_init_arch_data(void *info) |
| { |
| u32 etmidr0; |
| u32 etmidr1; |
| u32 etmidr2; |
| u32 etmidr3; |
| u32 etmidr4; |
| u32 etmidr5; |
| struct etmv4_drvdata *drvdata = info; |
| int i; |
| |
| /* Make sure all registers are accessible */ |
| etm4_os_unlock(drvdata); |
| |
| CS_UNLOCK(drvdata->base); |
| |
| /* find all capabilities of the tracing unit */ |
| etmidr0 = readl_relaxed(drvdata->base + TRCIDR0); |
| |
| /* INSTP0, bits[2:1] P0 tracing support field */ |
| if (BMVAL(etmidr0, 1, 1) && BMVAL(etmidr0, 2, 2)) |
| drvdata->instrp0 = true; |
| else |
| drvdata->instrp0 = false; |
| |
| /* TRCBB, bit[5] Branch broadcast tracing support bit */ |
| if (BMVAL(etmidr0, 5, 5)) |
| drvdata->trcbb = true; |
| else |
| drvdata->trcbb = false; |
| |
| /* TRCCOND, bit[6] Conditional instruction tracing support bit */ |
| if (BMVAL(etmidr0, 6, 6)) |
| drvdata->trccond = true; |
| else |
| drvdata->trccond = false; |
| |
| /* TRCCCI, bit[7] Cycle counting instruction bit */ |
| if (BMVAL(etmidr0, 7, 7)) |
| drvdata->trccci = true; |
| else |
| drvdata->trccci = false; |
| |
| /* RETSTACK, bit[9] Return stack bit */ |
| if (BMVAL(etmidr0, 9, 9)) |
| drvdata->retstack = true; |
| else |
| drvdata->retstack = false; |
| |
| /* NUMEVENT, bits[11:10] Number of events field */ |
| drvdata->nr_event = BMVAL(etmidr0, 10, 11); |
| /* QSUPP, bits[16:15] Q element support field */ |
| drvdata->q_support = BMVAL(etmidr0, 15, 16); |
| /* TSSIZE, bits[28:24] Global timestamp size field */ |
| drvdata->ts_size = BMVAL(etmidr0, 24, 28); |
| |
| /* base architecture of trace unit */ |
| etmidr1 = readl_relaxed(drvdata->base + TRCIDR1); |
| /* |
| * TRCARCHMIN, bits[7:4] architecture the minor version number |
| * TRCARCHMAJ, bits[11:8] architecture major versin number |
| */ |
| drvdata->arch = BMVAL(etmidr1, 4, 11); |
| drvdata->config.arch = drvdata->arch; |
| |
| /* maximum size of resources */ |
| etmidr2 = readl_relaxed(drvdata->base + TRCIDR2); |
| /* CIDSIZE, bits[9:5] Indicates the Context ID size */ |
| drvdata->ctxid_size = BMVAL(etmidr2, 5, 9); |
| /* VMIDSIZE, bits[14:10] Indicates the VMID size */ |
| drvdata->vmid_size = BMVAL(etmidr2, 10, 14); |
| /* CCSIZE, bits[28:25] size of the cycle counter in bits minus 12 */ |
| drvdata->ccsize = BMVAL(etmidr2, 25, 28); |
| |
| etmidr3 = readl_relaxed(drvdata->base + TRCIDR3); |
| /* CCITMIN, bits[11:0] minimum threshold value that can be programmed */ |
| drvdata->ccitmin = BMVAL(etmidr3, 0, 11); |
| /* EXLEVEL_S, bits[19:16] Secure state instruction tracing */ |
| drvdata->s_ex_level = BMVAL(etmidr3, 16, 19); |
| /* EXLEVEL_NS, bits[23:20] Non-secure state instruction tracing */ |
| drvdata->ns_ex_level = BMVAL(etmidr3, 20, 23); |
| |
| /* |
| * TRCERR, bit[24] whether a trace unit can trace a |
| * system error exception. |
| */ |
| if (BMVAL(etmidr3, 24, 24)) |
| drvdata->trc_error = true; |
| else |
| drvdata->trc_error = false; |
| |
| /* SYNCPR, bit[25] implementation has a fixed synchronization period? */ |
| if (BMVAL(etmidr3, 25, 25)) |
| drvdata->syncpr = true; |
| else |
| drvdata->syncpr = false; |
| |
| /* STALLCTL, bit[26] is stall control implemented? */ |
| if (BMVAL(etmidr3, 26, 26)) |
| drvdata->stallctl = true; |
| else |
| drvdata->stallctl = false; |
| |
| /* SYSSTALL, bit[27] implementation can support stall control? */ |
| if (BMVAL(etmidr3, 27, 27)) |
| drvdata->sysstall = true; |
| else |
| drvdata->sysstall = false; |
| |
| /* NUMPROC, bits[30:28] the number of PEs available for tracing */ |
| drvdata->nr_pe = BMVAL(etmidr3, 28, 30); |
| |
| /* NOOVERFLOW, bit[31] is trace overflow prevention supported */ |
| if (BMVAL(etmidr3, 31, 31)) |
| drvdata->nooverflow = true; |
| else |
| drvdata->nooverflow = false; |
| |
| /* number of resources trace unit supports */ |
| etmidr4 = readl_relaxed(drvdata->base + TRCIDR4); |
| /* NUMACPAIRS, bits[0:3] number of addr comparator pairs for tracing */ |
| drvdata->nr_addr_cmp = BMVAL(etmidr4, 0, 3); |
| /* NUMPC, bits[15:12] number of PE comparator inputs for tracing */ |
| drvdata->nr_pe_cmp = BMVAL(etmidr4, 12, 15); |
| /* |
| * NUMRSPAIR, bits[19:16] |
| * The number of resource pairs conveyed by the HW starts at 0, i.e a |
| * value of 0x0 indicate 1 resource pair, 0x1 indicate two and so on. |
| * As such add 1 to the value of NUMRSPAIR for a better representation. |
| */ |
| drvdata->nr_resource = BMVAL(etmidr4, 16, 19) + 1; |
| /* |
| * NUMSSCC, bits[23:20] the number of single-shot |
| * comparator control for tracing. Read any status regs as these |
| * also contain RO capability data. |
| */ |
| drvdata->nr_ss_cmp = BMVAL(etmidr4, 20, 23); |
| for (i = 0; i < drvdata->nr_ss_cmp; i++) { |
| drvdata->config.ss_status[i] = |
| readl_relaxed(drvdata->base + TRCSSCSRn(i)); |
| } |
| /* NUMCIDC, bits[27:24] number of Context ID comparators for tracing */ |
| drvdata->numcidc = BMVAL(etmidr4, 24, 27); |
| /* NUMVMIDC, bits[31:28] number of VMID comparators for tracing */ |
| drvdata->numvmidc = BMVAL(etmidr4, 28, 31); |
| |
| etmidr5 = readl_relaxed(drvdata->base + TRCIDR5); |
| /* NUMEXTIN, bits[8:0] number of external inputs implemented */ |
| drvdata->nr_ext_inp = BMVAL(etmidr5, 0, 8); |
| /* TRACEIDSIZE, bits[21:16] indicates the trace ID width */ |
| drvdata->trcid_size = BMVAL(etmidr5, 16, 21); |
| /* ATBTRIG, bit[22] implementation can support ATB triggers? */ |
| if (BMVAL(etmidr5, 22, 22)) |
| drvdata->atbtrig = true; |
| else |
| drvdata->atbtrig = false; |
| /* |
| * LPOVERRIDE, bit[23] implementation supports |
| * low-power state override |
| */ |
| if (BMVAL(etmidr5, 23, 23)) |
| drvdata->lpoverride = true; |
| else |
| drvdata->lpoverride = false; |
| /* NUMSEQSTATE, bits[27:25] number of sequencer states implemented */ |
| drvdata->nrseqstate = BMVAL(etmidr5, 25, 27); |
| /* NUMCNTR, bits[30:28] number of counters available for tracing */ |
| drvdata->nr_cntr = BMVAL(etmidr5, 28, 30); |
| CS_LOCK(drvdata->base); |
| } |
| |
| static void etm4_set_default_config(struct etmv4_config *config) |
| { |
| /* disable all events tracing */ |
| config->eventctrl0 = 0x0; |
| config->eventctrl1 = 0x0; |
| |
| /* disable stalling */ |
| config->stall_ctrl = 0x0; |
| |
| /* enable trace synchronization every 4096 bytes, if available */ |
| config->syncfreq = 0xC; |
| |
| /* disable timestamp event */ |
| config->ts_ctrl = 0x0; |
| |
| /* TRCVICTLR::EVENT = 0x01, select the always on logic */ |
| config->vinst_ctrl = BIT(0); |
| } |
| |
| static u64 etm4_get_ns_access_type(struct etmv4_config *config) |
| { |
| u64 access_type = 0; |
| |
| /* |
| * EXLEVEL_NS, bits[15:12] |
| * The Exception levels are: |
| * Bit[12] Exception level 0 - Application |
| * Bit[13] Exception level 1 - OS |
| * Bit[14] Exception level 2 - Hypervisor |
| * Bit[15] Never implemented |
| */ |
| if (!is_kernel_in_hyp_mode()) { |
| /* Stay away from hypervisor mode for non-VHE */ |
| access_type = ETM_EXLEVEL_NS_HYP; |
| if (config->mode & ETM_MODE_EXCL_KERN) |
| access_type |= ETM_EXLEVEL_NS_OS; |
| } else if (config->mode & ETM_MODE_EXCL_KERN) { |
| access_type = ETM_EXLEVEL_NS_HYP; |
| } |
| |
| if (config->mode & ETM_MODE_EXCL_USER) |
| access_type |= ETM_EXLEVEL_NS_APP; |
| |
| return access_type; |
| } |
| |
| static u64 etm4_get_access_type(struct etmv4_config *config) |
| { |
| u64 access_type = etm4_get_ns_access_type(config); |
| u64 s_hyp = (config->arch & 0x0f) >= 0x4 ? ETM_EXLEVEL_S_HYP : 0; |
| |
| /* |
| * EXLEVEL_S, bits[11:8], don't trace anything happening |
| * in secure state. |
| */ |
| access_type |= (ETM_EXLEVEL_S_APP | |
| ETM_EXLEVEL_S_OS | |
| s_hyp | |
| ETM_EXLEVEL_S_MON); |
| |
| return access_type; |
| } |
| |
| static void etm4_set_comparator_filter(struct etmv4_config *config, |
| u64 start, u64 stop, int comparator) |
| { |
| u64 access_type = etm4_get_access_type(config); |
| |
| /* First half of default address comparator */ |
| config->addr_val[comparator] = start; |
| config->addr_acc[comparator] = access_type; |
| config->addr_type[comparator] = ETM_ADDR_TYPE_RANGE; |
| |
| /* Second half of default address comparator */ |
| config->addr_val[comparator + 1] = stop; |
| config->addr_acc[comparator + 1] = access_type; |
| config->addr_type[comparator + 1] = ETM_ADDR_TYPE_RANGE; |
| |
| /* |
| * Configure the ViewInst function to include this address range |
| * comparator. |
| * |
| * @comparator is divided by two since it is the index in the |
| * etmv4_config::addr_val array but register TRCVIIECTLR deals with |
| * address range comparator _pairs_. |
| * |
| * Therefore: |
| * index 0 -> compatator pair 0 |
| * index 2 -> comparator pair 1 |
| * index 4 -> comparator pair 2 |
| * ... |
| * index 14 -> comparator pair 7 |
| */ |
| config->viiectlr |= BIT(comparator / 2); |
| } |
| |
| static void etm4_set_start_stop_filter(struct etmv4_config *config, |
| u64 address, int comparator, |
| enum etm_addr_type type) |
| { |
| int shift; |
| u64 access_type = etm4_get_access_type(config); |
| |
| /* Configure the comparator */ |
| config->addr_val[comparator] = address; |
| config->addr_acc[comparator] = access_type; |
| config->addr_type[comparator] = type; |
| |
| /* |
| * Configure ViewInst Start-Stop control register. |
| * Addresses configured to start tracing go from bit 0 to n-1, |
| * while those configured to stop tracing from 16 to 16 + n-1. |
| */ |
| shift = (type == ETM_ADDR_TYPE_START ? 0 : 16); |
| config->vissctlr |= BIT(shift + comparator); |
| } |
| |
| static void etm4_set_default_filter(struct etmv4_config *config) |
| { |
| /* Trace everything 'default' filter achieved by no filtering */ |
| config->viiectlr = 0x0; |
| |
| /* |
| * TRCVICTLR::SSSTATUS == 1, the start-stop logic is |
| * in the started state |
| */ |
| config->vinst_ctrl |= BIT(9); |
| config->mode |= ETM_MODE_VIEWINST_STARTSTOP; |
| |
| /* No start-stop filtering for ViewInst */ |
| config->vissctlr = 0x0; |
| } |
| |
| static void etm4_set_default(struct etmv4_config *config) |
| { |
| if (WARN_ON_ONCE(!config)) |
| return; |
| |
| /* |
| * Make default initialisation trace everything |
| * |
| * This is done by a minimum default config sufficient to enable |
| * full instruction trace - with a default filter for trace all |
| * achieved by having no filtering. |
| */ |
| etm4_set_default_config(config); |
| etm4_set_default_filter(config); |
| } |
| |
| static int etm4_get_next_comparator(struct etmv4_drvdata *drvdata, u32 type) |
| { |
| int nr_comparator, index = 0; |
| struct etmv4_config *config = &drvdata->config; |
| |
| /* |
| * nr_addr_cmp holds the number of comparator _pair_, so time 2 |
| * for the total number of comparators. |
| */ |
| nr_comparator = drvdata->nr_addr_cmp * 2; |
| |
| /* Go through the tally of comparators looking for a free one. */ |
| while (index < nr_comparator) { |
| switch (type) { |
| case ETM_ADDR_TYPE_RANGE: |
| if (config->addr_type[index] == ETM_ADDR_TYPE_NONE && |
| config->addr_type[index + 1] == ETM_ADDR_TYPE_NONE) |
| return index; |
| |
| /* Address range comparators go in pairs */ |
| index += 2; |
| break; |
| case ETM_ADDR_TYPE_START: |
| case ETM_ADDR_TYPE_STOP: |
| if (config->addr_type[index] == ETM_ADDR_TYPE_NONE) |
| return index; |
| |
| /* Start/stop address can have odd indexes */ |
| index += 1; |
| break; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| /* If we are here all the comparators have been used. */ |
| return -ENOSPC; |
| } |
| |
| static int etm4_set_event_filters(struct etmv4_drvdata *drvdata, |
| struct perf_event *event) |
| { |
| int i, comparator, ret = 0; |
| u64 address; |
| struct etmv4_config *config = &drvdata->config; |
| struct etm_filters *filters = event->hw.addr_filters; |
| |
| if (!filters) |
| goto default_filter; |
| |
| /* Sync events with what Perf got */ |
| perf_event_addr_filters_sync(event); |
| |
| /* |
| * If there are no filters to deal with simply go ahead with |
| * the default filter, i.e the entire address range. |
| */ |
| if (!filters->nr_filters) |
| goto default_filter; |
| |
| for (i = 0; i < filters->nr_filters; i++) { |
| struct etm_filter *filter = &filters->etm_filter[i]; |
| enum etm_addr_type type = filter->type; |
| |
| /* See if a comparator is free. */ |
| comparator = etm4_get_next_comparator(drvdata, type); |
| if (comparator < 0) { |
| ret = comparator; |
| goto out; |
| } |
| |
| switch (type) { |
| case ETM_ADDR_TYPE_RANGE: |
| etm4_set_comparator_filter(config, |
| filter->start_addr, |
| filter->stop_addr, |
| comparator); |
| /* |
| * TRCVICTLR::SSSTATUS == 1, the start-stop logic is |
| * in the started state |
| */ |
| config->vinst_ctrl |= BIT(9); |
| |
| /* No start-stop filtering for ViewInst */ |
| config->vissctlr = 0x0; |
| break; |
| case ETM_ADDR_TYPE_START: |
| case ETM_ADDR_TYPE_STOP: |
| /* Get the right start or stop address */ |
| address = (type == ETM_ADDR_TYPE_START ? |
| filter->start_addr : |
| filter->stop_addr); |
| |
| /* Configure comparator */ |
| etm4_set_start_stop_filter(config, address, |
| comparator, type); |
| |
| /* |
| * If filters::ssstatus == 1, trace acquisition was |
| * started but the process was yanked away before the |
| * the stop address was hit. As such the start/stop |
| * logic needs to be re-started so that tracing can |
| * resume where it left. |
| * |
| * The start/stop logic status when a process is |
| * scheduled out is checked in function |
| * etm4_disable_perf(). |
| */ |
| if (filters->ssstatus) |
| config->vinst_ctrl |= BIT(9); |
| |
| /* No include/exclude filtering for ViewInst */ |
| config->viiectlr = 0x0; |
| break; |
| default: |
| ret = -EINVAL; |
| goto out; |
| } |
| } |
| |
| goto out; |
| |
| |
| default_filter: |
| etm4_set_default_filter(config); |
| |
| out: |
| return ret; |
| } |
| |
| void etm4_config_trace_mode(struct etmv4_config *config) |
| { |
| u32 addr_acc, mode; |
| |
| mode = config->mode; |
| mode &= (ETM_MODE_EXCL_KERN | ETM_MODE_EXCL_USER); |
| |
| /* excluding kernel AND user space doesn't make sense */ |
| WARN_ON_ONCE(mode == (ETM_MODE_EXCL_KERN | ETM_MODE_EXCL_USER)); |
| |
| /* nothing to do if neither flags are set */ |
| if (!(mode & ETM_MODE_EXCL_KERN) && !(mode & ETM_MODE_EXCL_USER)) |
| return; |
| |
| addr_acc = config->addr_acc[ETM_DEFAULT_ADDR_COMP]; |
| /* clear default config */ |
| addr_acc &= ~(ETM_EXLEVEL_NS_APP | ETM_EXLEVEL_NS_OS | |
| ETM_EXLEVEL_NS_HYP); |
| |
| addr_acc |= etm4_get_ns_access_type(config); |
| |
| config->addr_acc[ETM_DEFAULT_ADDR_COMP] = addr_acc; |
| config->addr_acc[ETM_DEFAULT_ADDR_COMP + 1] = addr_acc; |
| } |
| |
| static int etm4_online_cpu(unsigned int cpu) |
| { |
| if (!etmdrvdata[cpu]) |
| return 0; |
| |
| if (etmdrvdata[cpu]->boot_enable && !etmdrvdata[cpu]->sticky_enable) |
| coresight_enable(etmdrvdata[cpu]->csdev); |
| return 0; |
| } |
| |
| static int etm4_starting_cpu(unsigned int cpu) |
| { |
| if (!etmdrvdata[cpu]) |
| return 0; |
| |
| spin_lock(&etmdrvdata[cpu]->spinlock); |
| if (!etmdrvdata[cpu]->os_unlock) |
| etm4_os_unlock(etmdrvdata[cpu]); |
| |
| if (local_read(&etmdrvdata[cpu]->mode)) |
| etm4_enable_hw(etmdrvdata[cpu]); |
| spin_unlock(&etmdrvdata[cpu]->spinlock); |
| return 0; |
| } |
| |
| static int etm4_dying_cpu(unsigned int cpu) |
| { |
| if (!etmdrvdata[cpu]) |
| return 0; |
| |
| spin_lock(&etmdrvdata[cpu]->spinlock); |
| if (local_read(&etmdrvdata[cpu]->mode)) |
| etm4_disable_hw(etmdrvdata[cpu]); |
| spin_unlock(&etmdrvdata[cpu]->spinlock); |
| return 0; |
| } |
| |
| static void etm4_init_trace_id(struct etmv4_drvdata *drvdata) |
| { |
| drvdata->trcid = coresight_get_trace_id(drvdata->cpu); |
| } |
| |
| static int etm4_cpu_save(struct etmv4_drvdata *drvdata) |
| { |
| int i, ret = 0; |
| struct etmv4_save_state *state; |
| struct device *etm_dev = &drvdata->csdev->dev; |
| |
| /* |
| * As recommended by 3.4.1 ("The procedure when powering down the PE") |
| * of ARM IHI 0064D |
| */ |
| dsb(sy); |
| isb(); |
| |
| CS_UNLOCK(drvdata->base); |
| |
| /* Lock the OS lock to disable trace and external debugger access */ |
| etm4_os_lock(drvdata); |
| |
| /* wait for TRCSTATR.PMSTABLE to go up */ |
| if (coresight_timeout(drvdata->base, TRCSTATR, |
| TRCSTATR_PMSTABLE_BIT, 1)) { |
| dev_err(etm_dev, |
| "timeout while waiting for PM Stable Status\n"); |
| etm4_os_unlock(drvdata); |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| state = drvdata->save_state; |
| |
| state->trcprgctlr = readl(drvdata->base + TRCPRGCTLR); |
| state->trcprocselr = readl(drvdata->base + TRCPROCSELR); |
| state->trcconfigr = readl(drvdata->base + TRCCONFIGR); |
| state->trcauxctlr = readl(drvdata->base + TRCAUXCTLR); |
| state->trceventctl0r = readl(drvdata->base + TRCEVENTCTL0R); |
| state->trceventctl1r = readl(drvdata->base + TRCEVENTCTL1R); |
| state->trcstallctlr = readl(drvdata->base + TRCSTALLCTLR); |
| state->trctsctlr = readl(drvdata->base + TRCTSCTLR); |
| state->trcsyncpr = readl(drvdata->base + TRCSYNCPR); |
| state->trcccctlr = readl(drvdata->base + TRCCCCTLR); |
| state->trcbbctlr = readl(drvdata->base + TRCBBCTLR); |
| state->trctraceidr = readl(drvdata->base + TRCTRACEIDR); |
| state->trcqctlr = readl(drvdata->base + TRCQCTLR); |
| |
| state->trcvictlr = readl(drvdata->base + TRCVICTLR); |
| state->trcviiectlr = readl(drvdata->base + TRCVIIECTLR); |
| state->trcvissctlr = readl(drvdata->base + TRCVISSCTLR); |
| state->trcvipcssctlr = readl(drvdata->base + TRCVIPCSSCTLR); |
| state->trcvdctlr = readl(drvdata->base + TRCVDCTLR); |
| state->trcvdsacctlr = readl(drvdata->base + TRCVDSACCTLR); |
| state->trcvdarcctlr = readl(drvdata->base + TRCVDARCCTLR); |
| |
| for (i = 0; i < drvdata->nrseqstate; i++) |
| state->trcseqevr[i] = readl(drvdata->base + TRCSEQEVRn(i)); |
| |
| state->trcseqrstevr = readl(drvdata->base + TRCSEQRSTEVR); |
| state->trcseqstr = readl(drvdata->base + TRCSEQSTR); |
| state->trcextinselr = readl(drvdata->base + TRCEXTINSELR); |
| |
| for (i = 0; i < drvdata->nr_cntr; i++) { |
| state->trccntrldvr[i] = readl(drvdata->base + TRCCNTRLDVRn(i)); |
| state->trccntctlr[i] = readl(drvdata->base + TRCCNTCTLRn(i)); |
| state->trccntvr[i] = readl(drvdata->base + TRCCNTVRn(i)); |
| } |
| |
| for (i = 0; i < drvdata->nr_resource * 2; i++) |
| state->trcrsctlr[i] = readl(drvdata->base + TRCRSCTLRn(i)); |
| |
| for (i = 0; i < drvdata->nr_ss_cmp; i++) { |
| state->trcssccr[i] = readl(drvdata->base + TRCSSCCRn(i)); |
| state->trcsscsr[i] = readl(drvdata->base + TRCSSCSRn(i)); |
| state->trcsspcicr[i] = readl(drvdata->base + TRCSSPCICRn(i)); |
| } |
| |
| for (i = 0; i < drvdata->nr_addr_cmp * 2; i++) { |
| state->trcacvr[i] = readl(drvdata->base + TRCACVRn(i)); |
| state->trcacatr[i] = readl(drvdata->base + TRCACATRn(i)); |
| } |
| |
| /* |
| * Data trace stream is architecturally prohibited for A profile cores |
| * so we don't save (or later restore) trcdvcvr and trcdvcmr - As per |
| * section 1.3.4 ("Possible functional configurations of an ETMv4 trace |
| * unit") of ARM IHI 0064D. |
| */ |
| |
| for (i = 0; i < drvdata->numcidc; i++) |
| state->trccidcvr[i] = readl(drvdata->base + TRCCIDCVRn(i)); |
| |
| for (i = 0; i < drvdata->numvmidc; i++) |
| state->trcvmidcvr[i] = readl(drvdata->base + TRCVMIDCVRn(i)); |
| |
| state->trccidcctlr0 = readl(drvdata->base + TRCCIDCCTLR0); |
| state->trccidcctlr1 = readl(drvdata->base + TRCCIDCCTLR1); |
| |
| state->trcvmidcctlr0 = readl(drvdata->base + TRCVMIDCCTLR0); |
| state->trcvmidcctlr0 = readl(drvdata->base + TRCVMIDCCTLR1); |
| |
| state->trcclaimset = readl(drvdata->base + TRCCLAIMCLR); |
| |
| state->trcpdcr = readl(drvdata->base + TRCPDCR); |
| |
| /* wait for TRCSTATR.IDLE to go up */ |
| if (coresight_timeout(drvdata->base, TRCSTATR, TRCSTATR_IDLE_BIT, 1)) { |
| dev_err(etm_dev, |
| "timeout while waiting for Idle Trace Status\n"); |
| etm4_os_unlock(drvdata); |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| drvdata->state_needs_restore = true; |
| |
| /* |
| * Power can be removed from the trace unit now. We do this to |
| * potentially save power on systems that respect the TRCPDCR_PU |
| * despite requesting software to save/restore state. |
| */ |
| writel_relaxed((state->trcpdcr & ~TRCPDCR_PU), |
| drvdata->base + TRCPDCR); |
| |
| out: |
| CS_LOCK(drvdata->base); |
| return ret; |
| } |
| |
| static void etm4_cpu_restore(struct etmv4_drvdata *drvdata) |
| { |
| int i; |
| struct etmv4_save_state *state = drvdata->save_state; |
| |
| CS_UNLOCK(drvdata->base); |
| |
| writel_relaxed(state->trcclaimset, drvdata->base + TRCCLAIMSET); |
| |
| writel_relaxed(state->trcprgctlr, drvdata->base + TRCPRGCTLR); |
| writel_relaxed(state->trcprocselr, drvdata->base + TRCPROCSELR); |
| writel_relaxed(state->trcconfigr, drvdata->base + TRCCONFIGR); |
| writel_relaxed(state->trcauxctlr, drvdata->base + TRCAUXCTLR); |
| writel_relaxed(state->trceventctl0r, drvdata->base + TRCEVENTCTL0R); |
| writel_relaxed(state->trceventctl1r, drvdata->base + TRCEVENTCTL1R); |
| writel_relaxed(state->trcstallctlr, drvdata->base + TRCSTALLCTLR); |
| writel_relaxed(state->trctsctlr, drvdata->base + TRCTSCTLR); |
| writel_relaxed(state->trcsyncpr, drvdata->base + TRCSYNCPR); |
| writel_relaxed(state->trcccctlr, drvdata->base + TRCCCCTLR); |
| writel_relaxed(state->trcbbctlr, drvdata->base + TRCBBCTLR); |
| writel_relaxed(state->trctraceidr, drvdata->base + TRCTRACEIDR); |
| writel_relaxed(state->trcqctlr, drvdata->base + TRCQCTLR); |
| |
| writel_relaxed(state->trcvictlr, drvdata->base + TRCVICTLR); |
| writel_relaxed(state->trcviiectlr, drvdata->base + TRCVIIECTLR); |
| writel_relaxed(state->trcvissctlr, drvdata->base + TRCVISSCTLR); |
| writel_relaxed(state->trcvipcssctlr, drvdata->base + TRCVIPCSSCTLR); |
| writel_relaxed(state->trcvdctlr, drvdata->base + TRCVDCTLR); |
| writel_relaxed(state->trcvdsacctlr, drvdata->base + TRCVDSACCTLR); |
| writel_relaxed(state->trcvdarcctlr, drvdata->base + TRCVDARCCTLR); |
| |
| for (i = 0; i < drvdata->nrseqstate; i++) |
| writel_relaxed(state->trcseqevr[i], |
| drvdata->base + TRCSEQEVRn(i)); |
| |
| writel_relaxed(state->trcseqrstevr, drvdata->base + TRCSEQRSTEVR); |
| writel_relaxed(state->trcseqstr, drvdata->base + TRCSEQSTR); |
| writel_relaxed(state->trcextinselr, drvdata->base + TRCEXTINSELR); |
| |
| for (i = 0; i < drvdata->nr_cntr; i++) { |
| writel_relaxed(state->trccntrldvr[i], |
| drvdata->base + TRCCNTRLDVRn(i)); |
| writel_relaxed(state->trccntctlr[i], |
| drvdata->base + TRCCNTCTLRn(i)); |
| writel_relaxed(state->trccntvr[i], |
| drvdata->base + TRCCNTVRn(i)); |
| } |
| |
| for (i = 0; i < drvdata->nr_resource * 2; i++) |
| writel_relaxed(state->trcrsctlr[i], |
| drvdata->base + TRCRSCTLRn(i)); |
| |
| for (i = 0; i < drvdata->nr_ss_cmp; i++) { |
| writel_relaxed(state->trcssccr[i], |
| drvdata->base + TRCSSCCRn(i)); |
| writel_relaxed(state->trcsscsr[i], |
| drvdata->base + TRCSSCSRn(i)); |
| writel_relaxed(state->trcsspcicr[i], |
| drvdata->base + TRCSSPCICRn(i)); |
| } |
| |
| for (i = 0; i < drvdata->nr_addr_cmp * 2; i++) { |
| writel_relaxed(state->trcacvr[i], |
| drvdata->base + TRCACVRn(i)); |
| writel_relaxed(state->trcacatr[i], |
| drvdata->base + TRCACATRn(i)); |
| } |
| |
| for (i = 0; i < drvdata->numcidc; i++) |
| writel_relaxed(state->trccidcvr[i], |
| drvdata->base + TRCCIDCVRn(i)); |
| |
| for (i = 0; i < drvdata->numvmidc; i++) |
| writel_relaxed(state->trcvmidcvr[i], |
| drvdata->base + TRCVMIDCVRn(i)); |
| |
| writel_relaxed(state->trccidcctlr0, drvdata->base + TRCCIDCCTLR0); |
| writel_relaxed(state->trccidcctlr1, drvdata->base + TRCCIDCCTLR1); |
| |
| writel_relaxed(state->trcvmidcctlr0, drvdata->base + TRCVMIDCCTLR0); |
| writel_relaxed(state->trcvmidcctlr0, drvdata->base + TRCVMIDCCTLR1); |
| |
| writel_relaxed(state->trcclaimset, drvdata->base + TRCCLAIMSET); |
| |
| writel_relaxed(state->trcpdcr, drvdata->base + TRCPDCR); |
| |
| drvdata->state_needs_restore = false; |
| |
| /* |
| * As recommended by section 4.3.7 ("Synchronization when using the |
| * memory-mapped interface") of ARM IHI 0064D |
| */ |
| dsb(sy); |
| isb(); |
| |
| /* Unlock the OS lock to re-enable trace and external debug access */ |
| etm4_os_unlock(drvdata); |
| CS_LOCK(drvdata->base); |
| } |
| |
| static int etm4_cpu_pm_notify(struct notifier_block *nb, unsigned long cmd, |
| void *v) |
| { |
| struct etmv4_drvdata *drvdata; |
| unsigned int cpu = smp_processor_id(); |
| |
| if (!etmdrvdata[cpu]) |
| return NOTIFY_OK; |
| |
| drvdata = etmdrvdata[cpu]; |
| |
| if (!drvdata->save_state) |
| return NOTIFY_OK; |
| |
| if (WARN_ON_ONCE(drvdata->cpu != cpu)) |
| return NOTIFY_BAD; |
| |
| switch (cmd) { |
| case CPU_PM_ENTER: |
| /* save the state if self-hosted coresight is in use */ |
| if (local_read(&drvdata->mode)) |
| if (etm4_cpu_save(drvdata)) |
| return NOTIFY_BAD; |
| break; |
| case CPU_PM_EXIT: |
| /* fallthrough */ |
| case CPU_PM_ENTER_FAILED: |
| if (drvdata->state_needs_restore) |
| etm4_cpu_restore(drvdata); |
| break; |
| default: |
| return NOTIFY_DONE; |
| } |
| |
| return NOTIFY_OK; |
| } |
| |
| static struct notifier_block etm4_cpu_pm_nb = { |
| .notifier_call = etm4_cpu_pm_notify, |
| }; |
| |
| /* Setup PM. Called with cpus locked. Deals with error conditions and counts */ |
| static int etm4_pm_setup_cpuslocked(void) |
| { |
| int ret; |
| |
| if (etm4_count++) |
| return 0; |
| |
| ret = cpu_pm_register_notifier(&etm4_cpu_pm_nb); |
| if (ret) |
| goto reduce_count; |
| |
| ret = cpuhp_setup_state_nocalls_cpuslocked(CPUHP_AP_ARM_CORESIGHT_STARTING, |
| "arm/coresight4:starting", |
| etm4_starting_cpu, etm4_dying_cpu); |
| |
| if (ret) |
| goto unregister_notifier; |
| |
| ret = cpuhp_setup_state_nocalls_cpuslocked(CPUHP_AP_ONLINE_DYN, |
| "arm/coresight4:online", |
| etm4_online_cpu, NULL); |
| |
| /* HP dyn state ID returned in ret on success */ |
| if (ret > 0) { |
| hp_online = ret; |
| return 0; |
| } |
| |
| /* failed dyn state - remove others */ |
| cpuhp_remove_state_nocalls_cpuslocked(CPUHP_AP_ARM_CORESIGHT_STARTING); |
| |
| unregister_notifier: |
| cpu_pm_unregister_notifier(&etm4_cpu_pm_nb); |
| |
| reduce_count: |
| --etm4_count; |
| return ret; |
| } |
| |
| static void etm4_pm_clear(void) |
| { |
| if (--etm4_count != 0) |
| return; |
| |
| cpu_pm_unregister_notifier(&etm4_cpu_pm_nb); |
| cpuhp_remove_state_nocalls(CPUHP_AP_ARM_CORESIGHT_STARTING); |
| if (hp_online) { |
| cpuhp_remove_state_nocalls(hp_online); |
| hp_online = 0; |
| } |
| } |
| |
| static int etm4_probe(struct amba_device *adev, const struct amba_id *id) |
| { |
| int ret; |
| void __iomem *base; |
| struct device *dev = &adev->dev; |
| struct coresight_platform_data *pdata = NULL; |
| struct etmv4_drvdata *drvdata; |
| struct resource *res = &adev->res; |
| struct coresight_desc desc = { 0 }; |
| |
| drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL); |
| if (!drvdata) |
| return -ENOMEM; |
| |
| dev_set_drvdata(dev, drvdata); |
| |
| if (pm_save_enable == PARAM_PM_SAVE_FIRMWARE) |
| pm_save_enable = coresight_loses_context_with_cpu(dev) ? |
| PARAM_PM_SAVE_SELF_HOSTED : PARAM_PM_SAVE_NEVER; |
| |
| if (pm_save_enable != PARAM_PM_SAVE_NEVER) { |
| drvdata->save_state = devm_kmalloc(dev, |
| sizeof(struct etmv4_save_state), GFP_KERNEL); |
| if (!drvdata->save_state) |
| return -ENOMEM; |
| } |
| |
| /* Validity for the resource is already checked by the AMBA core */ |
| base = devm_ioremap_resource(dev, res); |
| if (IS_ERR(base)) |
| return PTR_ERR(base); |
| |
| drvdata->base = base; |
| |
| spin_lock_init(&drvdata->spinlock); |
| |
| drvdata->cpu = coresight_get_cpu(dev); |
| if (drvdata->cpu < 0) |
| return drvdata->cpu; |
| |
| desc.name = devm_kasprintf(dev, GFP_KERNEL, "etm%d", drvdata->cpu); |
| if (!desc.name) |
| return -ENOMEM; |
| |
| cpus_read_lock(); |
| etmdrvdata[drvdata->cpu] = drvdata; |
| |
| if (smp_call_function_single(drvdata->cpu, |
| etm4_init_arch_data, drvdata, 1)) |
| dev_err(dev, "ETM arch init failed\n"); |
| |
| ret = etm4_pm_setup_cpuslocked(); |
| cpus_read_unlock(); |
| |
| /* etm4_pm_setup_cpuslocked() does its own cleanup - exit on error */ |
| if (ret) { |
| etmdrvdata[drvdata->cpu] = NULL; |
| return ret; |
| } |
| |
| if (etm4_arch_supported(drvdata->arch) == false) { |
| ret = -EINVAL; |
| goto err_arch_supported; |
| } |
| |
| etm4_init_trace_id(drvdata); |
| etm4_set_default(&drvdata->config); |
| |
| pdata = coresight_get_platform_data(dev); |
| if (IS_ERR(pdata)) { |
| ret = PTR_ERR(pdata); |
| goto err_arch_supported; |
| } |
| adev->dev.platform_data = pdata; |
| |
| desc.type = CORESIGHT_DEV_TYPE_SOURCE; |
| desc.subtype.source_subtype = CORESIGHT_DEV_SUBTYPE_SOURCE_PROC; |
| desc.ops = &etm4_cs_ops; |
| desc.pdata = pdata; |
| desc.dev = dev; |
| desc.groups = coresight_etmv4_groups; |
| drvdata->csdev = coresight_register(&desc); |
| if (IS_ERR(drvdata->csdev)) { |
| ret = PTR_ERR(drvdata->csdev); |
| goto err_arch_supported; |
| } |
| |
| ret = etm_perf_symlink(drvdata->csdev, true); |
| if (ret) { |
| coresight_unregister(drvdata->csdev); |
| goto err_arch_supported; |
| } |
| |
| pm_runtime_put(&adev->dev); |
| dev_info(&drvdata->csdev->dev, "CPU%d: ETM v%d.%d initialized\n", |
| drvdata->cpu, drvdata->arch >> 4, drvdata->arch & 0xf); |
| |
| if (boot_enable) { |
| coresight_enable(drvdata->csdev); |
| drvdata->boot_enable = true; |
| } |
| |
| return 0; |
| |
| err_arch_supported: |
| etmdrvdata[drvdata->cpu] = NULL; |
| etm4_pm_clear(); |
| return ret; |
| } |
| |
| static struct amba_cs_uci_id uci_id_etm4[] = { |
| { |
| /* ETMv4 UCI data */ |
| .devarch = 0x47704a13, |
| .devarch_mask = 0xfff0ffff, |
| .devtype = 0x00000013, |
| } |
| }; |
| |
| static const struct amba_id etm4_ids[] = { |
| CS_AMBA_ID(0x000bb95d), /* Cortex-A53 */ |
| CS_AMBA_ID(0x000bb95e), /* Cortex-A57 */ |
| CS_AMBA_ID(0x000bb95a), /* Cortex-A72 */ |
| CS_AMBA_ID(0x000bb959), /* Cortex-A73 */ |
| CS_AMBA_UCI_ID(0x000bb9da, uci_id_etm4),/* Cortex-A35 */ |
| CS_AMBA_UCI_ID(0x000bbd0c, uci_id_etm4),/* Neoverse N1 */ |
| CS_AMBA_UCI_ID(0x000f0205, uci_id_etm4),/* Qualcomm Kryo */ |
| CS_AMBA_UCI_ID(0x000f0211, uci_id_etm4),/* Qualcomm Kryo */ |
| CS_AMBA_UCI_ID(0x000bb802, uci_id_etm4),/* Qualcomm Kryo 385 Cortex-A55 */ |
| CS_AMBA_UCI_ID(0x000bb803, uci_id_etm4),/* Qualcomm Kryo 385 Cortex-A75 */ |
| CS_AMBA_UCI_ID(0x000bb805, uci_id_etm4),/* Qualcomm Kryo 4XX Cortex-A55 */ |
| CS_AMBA_UCI_ID(0x000bb804, uci_id_etm4),/* Qualcomm Kryo 4XX Cortex-A76 */ |
| CS_AMBA_UCI_ID(0x000cc0af, uci_id_etm4),/* Marvell ThunderX2 */ |
| {}, |
| }; |
| |
| static struct amba_driver etm4x_driver = { |
| .drv = { |
| .name = "coresight-etm4x", |
| .suppress_bind_attrs = true, |
| }, |
| .probe = etm4_probe, |
| .id_table = etm4_ids, |
| }; |
| builtin_amba_driver(etm4x_driver); |