| /* |
| * Marvell Berlin PWM driver |
| * |
| * Copyright (C) 2015 Marvell Technology Group Ltd. |
| * |
| * Author: Antoine Tenart <antoine.tenart@free-electrons.com> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/pwm.h> |
| #include <linux/slab.h> |
| |
| #define BERLIN_PWM_EN 0x0 |
| #define BERLIN_PWM_ENABLE BIT(0) |
| #define BERLIN_PWM_CONTROL 0x4 |
| /* |
| * The prescaler claims to support 8 different moduli, configured using the |
| * low three bits of PWM_CONTROL. (Sequentially, they are 1, 4, 8, 16, 64, |
| * 256, 1024, and 4096.) However, the moduli from 4 to 1024 appear to be |
| * implemented by internally shifting TCNT left without adding additional |
| * bits. So, the max TCNT that actually works for a modulus of 4 is 0x3fff; |
| * for 8, 0x1fff; and so on. This means that those moduli are entirely |
| * useless, as we could just do the shift ourselves. The 4096 modulus is |
| * implemented with a real prescaler, so we do use that, but we treat it |
| * as a flag instead of pretending the modulus is actually configurable. |
| */ |
| #define BERLIN_PWM_PRESCALE_4096 0x7 |
| #define BERLIN_PWM_INVERT_POLARITY BIT(3) |
| #define BERLIN_PWM_DUTY 0x8 |
| #define BERLIN_PWM_TCNT 0xc |
| #define BERLIN_PWM_MAX_TCNT 65535 |
| |
| struct berlin_pwm_channel { |
| u32 enable; |
| u32 ctrl; |
| u32 duty; |
| u32 tcnt; |
| }; |
| |
| struct berlin_pwm_chip { |
| struct pwm_chip chip; |
| struct clk *clk; |
| void __iomem *base; |
| }; |
| |
| static inline struct berlin_pwm_chip *to_berlin_pwm_chip(struct pwm_chip *chip) |
| { |
| return container_of(chip, struct berlin_pwm_chip, chip); |
| } |
| |
| static inline u32 berlin_pwm_readl(struct berlin_pwm_chip *chip, |
| unsigned int channel, unsigned long offset) |
| { |
| return readl_relaxed(chip->base + channel * 0x10 + offset); |
| } |
| |
| static inline void berlin_pwm_writel(struct berlin_pwm_chip *chip, |
| unsigned int channel, u32 value, |
| unsigned long offset) |
| { |
| writel_relaxed(value, chip->base + channel * 0x10 + offset); |
| } |
| |
| static int berlin_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| struct berlin_pwm_channel *channel; |
| |
| channel = kzalloc(sizeof(*channel), GFP_KERNEL); |
| if (!channel) |
| return -ENOMEM; |
| |
| return pwm_set_chip_data(pwm, channel); |
| } |
| |
| static void berlin_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) |
| { |
| struct berlin_pwm_channel *channel = pwm_get_chip_data(pwm); |
| |
| kfree(channel); |
| } |
| |
| static int berlin_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm_dev, |
| int duty_ns, int period_ns) |
| { |
| struct berlin_pwm_chip *pwm = to_berlin_pwm_chip(chip); |
| bool prescale_4096 = false; |
| u32 value, duty, period; |
| u64 cycles; |
| |
| cycles = clk_get_rate(pwm->clk); |
| cycles *= period_ns; |
| do_div(cycles, NSEC_PER_SEC); |
| |
| if (cycles > BERLIN_PWM_MAX_TCNT) { |
| prescale_4096 = true; |
| cycles >>= 12; // Prescaled by 4096 |
| |
| if (cycles > BERLIN_PWM_MAX_TCNT) |
| return -ERANGE; |
| } |
| |
| period = cycles; |
| cycles *= duty_ns; |
| do_div(cycles, period_ns); |
| duty = cycles; |
| |
| value = berlin_pwm_readl(pwm, pwm_dev->hwpwm, BERLIN_PWM_CONTROL); |
| if (prescale_4096) |
| value |= BERLIN_PWM_PRESCALE_4096; |
| else |
| value &= ~BERLIN_PWM_PRESCALE_4096; |
| berlin_pwm_writel(pwm, pwm_dev->hwpwm, value, BERLIN_PWM_CONTROL); |
| |
| berlin_pwm_writel(pwm, pwm_dev->hwpwm, duty, BERLIN_PWM_DUTY); |
| berlin_pwm_writel(pwm, pwm_dev->hwpwm, period, BERLIN_PWM_TCNT); |
| |
| return 0; |
| } |
| |
| static int berlin_pwm_set_polarity(struct pwm_chip *chip, |
| struct pwm_device *pwm_dev, |
| enum pwm_polarity polarity) |
| { |
| struct berlin_pwm_chip *pwm = to_berlin_pwm_chip(chip); |
| u32 value; |
| |
| value = berlin_pwm_readl(pwm, pwm_dev->hwpwm, BERLIN_PWM_CONTROL); |
| |
| if (polarity == PWM_POLARITY_NORMAL) |
| value &= ~BERLIN_PWM_INVERT_POLARITY; |
| else |
| value |= BERLIN_PWM_INVERT_POLARITY; |
| |
| berlin_pwm_writel(pwm, pwm_dev->hwpwm, value, BERLIN_PWM_CONTROL); |
| |
| return 0; |
| } |
| |
| static int berlin_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm_dev) |
| { |
| struct berlin_pwm_chip *pwm = to_berlin_pwm_chip(chip); |
| u32 value; |
| |
| value = berlin_pwm_readl(pwm, pwm_dev->hwpwm, BERLIN_PWM_EN); |
| value |= BERLIN_PWM_ENABLE; |
| berlin_pwm_writel(pwm, pwm_dev->hwpwm, value, BERLIN_PWM_EN); |
| |
| return 0; |
| } |
| |
| static void berlin_pwm_disable(struct pwm_chip *chip, |
| struct pwm_device *pwm_dev) |
| { |
| struct berlin_pwm_chip *pwm = to_berlin_pwm_chip(chip); |
| u32 value; |
| |
| value = berlin_pwm_readl(pwm, pwm_dev->hwpwm, BERLIN_PWM_EN); |
| value &= ~BERLIN_PWM_ENABLE; |
| berlin_pwm_writel(pwm, pwm_dev->hwpwm, value, BERLIN_PWM_EN); |
| } |
| |
| static const struct pwm_ops berlin_pwm_ops = { |
| .request = berlin_pwm_request, |
| .free = berlin_pwm_free, |
| .config = berlin_pwm_config, |
| .set_polarity = berlin_pwm_set_polarity, |
| .enable = berlin_pwm_enable, |
| .disable = berlin_pwm_disable, |
| .owner = THIS_MODULE, |
| }; |
| |
| static const struct of_device_id berlin_pwm_match[] = { |
| { .compatible = "marvell,berlin-pwm" }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, berlin_pwm_match); |
| |
| static int berlin_pwm_probe(struct platform_device *pdev) |
| { |
| struct berlin_pwm_chip *pwm; |
| int ret; |
| |
| pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL); |
| if (!pwm) |
| return -ENOMEM; |
| |
| pwm->base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(pwm->base)) |
| return PTR_ERR(pwm->base); |
| |
| pwm->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(pwm->clk)) |
| return PTR_ERR(pwm->clk); |
| |
| ret = clk_prepare_enable(pwm->clk); |
| if (ret) |
| return ret; |
| |
| pwm->chip.dev = &pdev->dev; |
| pwm->chip.ops = &berlin_pwm_ops; |
| pwm->chip.npwm = 4; |
| pwm->chip.of_xlate = of_pwm_xlate_with_flags; |
| pwm->chip.of_pwm_n_cells = 3; |
| |
| ret = pwmchip_add(&pwm->chip); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret); |
| clk_disable_unprepare(pwm->clk); |
| return ret; |
| } |
| |
| platform_set_drvdata(pdev, pwm); |
| |
| return 0; |
| } |
| |
| static int berlin_pwm_remove(struct platform_device *pdev) |
| { |
| struct berlin_pwm_chip *pwm = platform_get_drvdata(pdev); |
| int ret; |
| |
| ret = pwmchip_remove(&pwm->chip); |
| clk_disable_unprepare(pwm->clk); |
| |
| return ret; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int berlin_pwm_suspend(struct device *dev) |
| { |
| struct berlin_pwm_chip *pwm = dev_get_drvdata(dev); |
| unsigned int i; |
| |
| for (i = 0; i < pwm->chip.npwm; i++) { |
| struct berlin_pwm_channel *channel; |
| |
| channel = pwm_get_chip_data(&pwm->chip.pwms[i]); |
| if (!channel) |
| continue; |
| |
| channel->enable = berlin_pwm_readl(pwm, i, BERLIN_PWM_ENABLE); |
| channel->ctrl = berlin_pwm_readl(pwm, i, BERLIN_PWM_CONTROL); |
| channel->duty = berlin_pwm_readl(pwm, i, BERLIN_PWM_DUTY); |
| channel->tcnt = berlin_pwm_readl(pwm, i, BERLIN_PWM_TCNT); |
| } |
| |
| clk_disable_unprepare(pwm->clk); |
| |
| return 0; |
| } |
| |
| static int berlin_pwm_resume(struct device *dev) |
| { |
| struct berlin_pwm_chip *pwm = dev_get_drvdata(dev); |
| unsigned int i; |
| int ret; |
| |
| ret = clk_prepare_enable(pwm->clk); |
| if (ret) |
| return ret; |
| |
| for (i = 0; i < pwm->chip.npwm; i++) { |
| struct berlin_pwm_channel *channel; |
| |
| channel = pwm_get_chip_data(&pwm->chip.pwms[i]); |
| if (!channel) |
| continue; |
| |
| berlin_pwm_writel(pwm, i, channel->ctrl, BERLIN_PWM_CONTROL); |
| berlin_pwm_writel(pwm, i, channel->duty, BERLIN_PWM_DUTY); |
| berlin_pwm_writel(pwm, i, channel->tcnt, BERLIN_PWM_TCNT); |
| berlin_pwm_writel(pwm, i, channel->enable, BERLIN_PWM_ENABLE); |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(berlin_pwm_pm_ops, berlin_pwm_suspend, |
| berlin_pwm_resume); |
| |
| static struct platform_driver berlin_pwm_driver = { |
| .probe = berlin_pwm_probe, |
| .remove = berlin_pwm_remove, |
| .driver = { |
| .name = "berlin-pwm", |
| .of_match_table = berlin_pwm_match, |
| .pm = &berlin_pwm_pm_ops, |
| }, |
| }; |
| module_platform_driver(berlin_pwm_driver); |
| |
| MODULE_AUTHOR("Antoine Tenart <antoine.tenart@free-electrons.com>"); |
| MODULE_DESCRIPTION("Marvell Berlin PWM driver"); |
| MODULE_LICENSE("GPL v2"); |