blob: 6249e9e0292863f00684485a1eab0ffcccf8f1b3 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
// Copyright (C) 2019 Clément Péron <peron.clem@gmail.com>
/dts-v1/;
#include "sun50i-h6.dtsi"
#include "sun50i-h6-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Beelink GS1";
compatible = "azw,beelink-gs1", "allwinner,sun50i-h6";
aliases {
ethernet0 = &emac;
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
connector {
compatible = "hdmi-connector";
type = "a";
ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
ext_osc32k: ext_osc32k_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "ext_osc32k";
};
leds {
compatible = "gpio-leds";
led {
label = "beelink:white:power";
gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
default-state = "on";
};
};
reg_vcc5v: vcc5v {
/* board wide 5V supply directly from the DC jack */
compatible = "regulator-fixed";
regulator-name = "vcc-5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
sound-spdif {
compatible = "simple-audio-card";
simple-audio-card,name = "sun50i-h6-spdif";
simple-audio-card,cpu {
sound-dai = <&spdif>;
};
simple-audio-card,codec {
sound-dai = <&spdif_out>;
};
};
spdif_out: spdif-out {
#sound-dai-cells = <0>;
compatible = "linux,spdif-dit";
};
};
&cpu0 {
cpu-supply = <&reg_dcdca>;
};
&de {
status = "okay";
};
&dwc3 {
status = "okay";
};
&ehci0 {
status = "okay";
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&ext_rgmii_pins>;
phy-mode = "rgmii-id";
phy-handle = <&ext_rgmii_phy>;
phy-supply = <&reg_aldo2>;
status = "okay";
};
&gpu {
mali-supply = <&reg_dcdcc>;
status = "okay";
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&mdio {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
};
&mmc0 {
vmmc-supply = <&reg_cldo1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
bus-width = <4>;
status = "okay";
};
&mmc2 {
vmmc-supply = <&reg_cldo1>;
vqmmc-supply = <&reg_bldo2>;
non-removable;
cap-mmc-hw-reset;
bus-width = <8>;
status = "okay";
};
&ohci0 {
status = "okay";
};
&pio {
vcc-pd-supply = <&reg_cldo1>;
vcc-pg-supply = <&reg_aldo1>;
};
&r_ir {
linux,rc-map-name = "rc-beelink-gs1";
status = "okay";
};
&r_pio {
/*
* FIXME: We can't add that supply for now since it would
* create a circular dependency between pinctrl, the regulator
* and the RSB Bus.
*
* vcc-pl-supply = <&reg_aldo1>;
*/
vcc-pm-supply = <&reg_aldo1>;
};
&r_rsb {
status = "okay";
axp805: pmic@745 {
compatible = "x-powers,axp805", "x-powers,axp806";
reg = <0x745>;
interrupt-parent = <&r_intc>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
x-powers,self-working-mode;
vina-supply = <&reg_vcc5v>;
vinb-supply = <&reg_vcc5v>;
vinc-supply = <&reg_vcc5v>;
vind-supply = <&reg_vcc5v>;
vine-supply = <&reg_vcc5v>;
aldoin-supply = <&reg_vcc5v>;
bldoin-supply = <&reg_vcc5v>;
cldoin-supply = <&reg_vcc5v>;
regulators {
reg_aldo1: aldo1 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-pl";
};
reg_aldo2: aldo2 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-ac200";
regulator-enable-ramp-delay = <100000>;
};
reg_aldo3: aldo3 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc25-dram";
};
reg_bldo1: bldo1 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-bias-pll";
};
reg_bldo2: bldo2 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-efuse-pcie-hdmi-io";
};
reg_bldo3: bldo3 {
regulator-always-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-dcxoio";
};
bldo4 {
/* unused */
};
reg_cldo1: cldo1 {
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-3v3";
};
reg_cldo2: cldo2 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi-1";
};
reg_cldo3: cldo3 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi-2";
};
reg_dcdca: dcdca {
regulator-always-on;
regulator-min-microvolt = <810000>;
regulator-max-microvolt = <1160000>;
regulator-ramp-delay = <2500>;
regulator-name = "vdd-cpu";
};
reg_dcdcc: dcdcc {
regulator-enable-ramp-delay = <32000>;
regulator-min-microvolt = <810000>;
regulator-max-microvolt = <1080000>;
regulator-ramp-delay = <2500>;
regulator-name = "vdd-gpu";
};
reg_dcdcd: dcdcd {
regulator-always-on;
regulator-min-microvolt = <960000>;
regulator-max-microvolt = <960000>;
regulator-name = "vdd-sys";
};
reg_dcdce: dcdce {
regulator-always-on;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vcc-dram";
};
sw {
/* unused */
};
};
};
};
&spdif {
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};
&usb2otg {
dr_mode = "host";
status = "okay";
};
&usb2phy {
usb0_vbus-supply = <&reg_vcc5v>;
status = "okay";
};
&usb3phy {
status = "okay";
};