blob: e22c5e77fecdc233cb5df7c6a78a089bc9925111 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Device Tree file for Freescale LS1012A QDS Board.
*
* Copyright 2016 Freescale Semiconductor, Inc.
*
*/
/dts-v1/;
#include "fsl-ls1012a.dtsi"
/ {
model = "LS1012A QDS Board";
compatible = "fsl,ls1012a-qds", "fsl,ls1012a";
aliases {
mmc0 = &esdhc0;
mmc1 = &esdhc1;
};
sys_mclk: clock-mclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24576000>;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
simple-audio-card,widgets =
"Microphone", "Microphone Jack",
"Headphone", "Headphone Jack",
"Speaker", "Speaker Ext",
"Line", "Line In Jack";
simple-audio-card,routing =
"MIC_IN", "Microphone Jack",
"Microphone Jack", "Mic Bias",
"LINE_IN", "Line In Jack",
"Headphone Jack", "HP_OUT",
"Speaker Ext", "LINE_OUT";
simple-audio-card,cpu {
sound-dai = <&sai2>;
frame-master;
bitclock-master;
};
simple-audio-card,codec {
sound-dai = <&codec>;
frame-master;
bitclock-master;
system-clock-frequency = <24576000>;
};
};
};
&dspi {
bus-num = <0>;
status = "okay";
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q128a11", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
};
flash@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "sst25wf040b", "jedec,spi-nor";
spi-cpol;
spi-cpha;
reg = <1>;
spi-max-frequency = <10000000>;
};
flash@2 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "en25s64", "jedec,spi-nor";
spi-cpol;
spi-cpha;
reg = <2>;
spi-max-frequency = <10000000>;
};
};
&duart0 {
status = "okay";
};
&esdhc0 {
status = "okay";
};
&esdhc1 {
status = "okay";
};
&i2c0 {
status = "okay";
pca9547@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
#size-cells = <0>;
i2c@4 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x4>;
codec: sgtl5000@a {
#sound-dai-cells = <0>;
compatible = "fsl,sgtl5000";
reg = <0xa>;
VDDA-supply = <&reg_3p3v>;
VDDIO-supply = <&reg_3p3v>;
clocks = <&sys_mclk>;
};
};
};
};
&qspi {
status = "okay";
s25fs512s0: flash@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
m25p,fast-read;
reg = <0>;
spi-rx-bus-width = <2>;
spi-tx-bus-width = <2>;
};
};
&sai2 {
status = "okay";
};
&sata {
status = "okay";
};