blob: e847d7209afc62f9ed7dbe610d84eaa85fcb249d [file] [log] [blame]
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2020, Konrad Dybcio
*/
#include <dt-bindings/iio/qcom,spmi-vadc.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
#include <dt-bindings/thermal/thermal.h>
/ {
thermal-zones {
pm660 {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&pm660_temp>;
trips {
pm660_alert0: pm660-alert0 {
temperature = <95000>;
hysteresis = <2000>;
type = "passive";
};
pm660_crit: pm660-crit {
temperature = <125000>;
hysteresis = <2000>;
type = "critical";
};
};
};
};
};
&spmi_bus {
pmic@0 {
compatible = "qcom,pm660", "qcom,spmi-pmic";
reg = <0x0 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
rtc@6000 {
compatible = "qcom,pm8941-rtc";
reg = <0x6000>, <0x6100>;
reg-names = "rtc", "alarm";
interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
};
pon: pon@800 {
compatible = "qcom,pm8916-pon";
reg = <0x800>;
pwrkey {
compatible = "qcom,pm8941-pwrkey";
interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
debounce = <15625>;
bias-pull-up;
linux,code = <KEY_POWER>;
};
};
pm660_temp: temp-alarm@2400 {
compatible = "qcom,spmi-temp-alarm";
reg = <0x2400>;
interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
io-channels = <&pm660_adc ADC5_DIE_TEMP>;
io-channel-names = "thermal";
#thermal-sensor-cells = <0>;
};
pm660_adc: adc@3100 {
compatible = "qcom,spmi-adc-rev2";
reg = <0x3100>;
interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
#io-channel-cells = <1>;
ref_gnd: ref_gnd@0 {
reg = <ADC5_REF_GND>;
qcom,decimation = <1024>;
qcom,pre-scaling = <1 1>;
};
vref_1p25: vref_1p25@1 {
reg = <ADC5_1P25VREF>;
qcom,decimation = <1024>;
qcom,pre-scaling = <1 1>;
};
die_temp: die_temp@6 {
reg = <ADC5_DIE_TEMP>;
qcom,decimation = <1024>;
qcom,pre-scaling = <1 1>;
};
xo_therm: xo_therm@4c {
reg = <ADC5_XO_THERM_100K_PU>;
qcom,pre-scaling = <1 1>;
qcom,decimation = <1024>;
qcom,hw-settle-time = <200>;
qcom,ratiometric;
};
msm_therm: msm_therm@4d {
reg = <ADC5_AMUX_THM1_100K_PU>;
qcom,pre-scaling = <1 1>;
qcom,decimation = <1024>;
qcom,hw-settle-time = <200>;
qcom,ratiometric;
};
emmc_therm: emmc_therm@4e {
reg = <ADC5_AMUX_THM2_100K_PU>;
qcom,pre-scaling = <1 1>;
qcom,decimation = <1024>;
qcom,hw-settle-time = <200>;
qcom,ratiometric;
};
pa_therm0: thermistor0@4f {
reg = <ADC5_AMUX_THM3_100K_PU>;
qcom,pre-scaling = <1 1>;
qcom,decimation = <1024>;
qcom,hw-settle-time = <200>;
qcom,ratiometric;
};
pa_therm1: thermistor1@50 {
reg = <ADC5_AMUX_THM4_100K_PU>;
qcom,pre-scaling = <1 1>;
qcom,decimation = <1024>;
qcom,hw-settle-time = <200>;
qcom,ratiometric;
};
quiet_therm: quiet_therm@51 {
reg = <ADC5_AMUX_THM5_100K_PU>;
qcom,pre-scaling = <1 1>;
qcom,decimation = <1024>;
qcom,hw-settle-time = <200>;
qcom,ratiometric;
};
vadc_vph_pwr: vph_pwr@83 {
reg = <ADC5_VPH_PWR>;
qcom,decimation = <1024>;
qcom,pre-scaling = <1 3>;
};
vcoin: vcoin@83 {
reg = <ADC5_VCOIN>;
qcom,decimation = <1024>;
qcom,pre-scaling = <1 3>;
};
};
pm660_gpios: gpios@c000 {
compatible = "qcom,pm660-gpio";
reg = <0xc000>;
gpio-controller;
gpio-ranges = <&pm660_gpios 0 0 13>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
pmic@1 {
compatible = "qcom,pm660", "qcom,spmi-pmic";
reg = <0x1 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pm660_spmi_regulators: pm660-regulators {
compatible = "qcom,pm660-regulators";
};
};
};