blob: 1c5f942311eef8e4c6f8cbf0d63c5240e3322b5d [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Keymile kmcoge4 Device Tree Source, based on the P2041RDB DTS
*
* (C) Copyright 2014
* Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
*
* Copyright 2011 Freescale Semiconductor Inc.
*/
/include/ "p2041si-pre.dtsi"
/ {
model = "keymile,kmcoge4";
compatible = "keymile,kmcoge4", "keymile,kmp204x";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
memory {
device_type = "memory";
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
bman_fbpr: bman-fbpr {
size = <0 0x1000000>;
alignment = <0 0x1000000>;
};
qman_fqd: qman-fqd {
size = <0 0x400000>;
alignment = <0 0x400000>;
};
qman_pfdr: qman-pfdr {
size = <0 0x2000000>;
alignment = <0 0x2000000>;
};
};
dcsr: dcsr@f00000000 {
ranges = <0x00000000 0xf 0x00000000 0x01008000>;
};
bportals: bman-portals@ff4000000 {
ranges = <0x0 0xf 0xf4000000 0x200000>;
};
qportals: qman-portals@ff4200000 {
ranges = <0x0 0xf 0xf4200000 0x200000>;
};
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,s25fl256s1", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>; /* input clock */
};
network_clock@1 {
compatible = "zarlink,zl30343";
reg = <1>;
spi-max-frequency = <8000000>;
};
flash@2 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,m25p32", "jedec,spi-nor";
reg = <2>;
spi-max-frequency = <15000000>;
};
};
sdhc@114000 {
status = "disabled";
};
i2c@119000 {
status = "disabled";
};
i2c@119100 {
status = "disabled";
};
usb0: usb@210000 {
status = "disabled";
};
usb1: usb@211000 {
status = "disabled";
};
sata@220000 {
status = "disabled";
};
sata@221000 {
status = "disabled";
};
fman0: fman@400000 {
enet0: ethernet@e0000 {
phy-connection-type = "sgmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};
mdio0: mdio@e1120 {
front_phy: ethernet-phy@11 {
reg = <0x11>;
};
};
enet1: ethernet@e2000 {
phy-connection-type = "sgmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};
enet2: ethernet@e4000 {
status = "disabled";
};
enet3: ethernet@e6000 {
status = "disabled";
};
enet4: ethernet@e8000 {
phy-handle = <&front_phy>;
phy-connection-type = "rgmii";
};
enet5: ethernet@f0000 {
status = "disabled";
};
};
};
rio: rapidio@ffe0c0000 {
status = "disabled";
};
lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xffa00000 0x00040000 /* LB 0 */
1 0 0xf 0xfb000000 0x00010000 /* LB 1 */
2 0 0xf 0xd0000000 0x10000000 /* LB 2 */
3 0 0xf 0xe0000000 0x10000000>; /* LB 3 */
nand@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,elbc-fcm-nand";
reg = <0 0 0x40000>;
};
board-control@1,0 {
compatible = "keymile,qriox";
reg = <1 0 0x80>;
};
chassis-mgmt@3,0 {
compatible = "keymile,bfticu";
interrupt-controller;
#interrupt-cells = <2>;
reg = <3 0 0x100>;
interrupt-parent = <&mpic>;
interrupts = <6 1 0 0>;
};
};
pci0: pcie@ffe200000 {
reg = <0xf 0xfe200000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci1: pcie@ffe201000 {
status = "disabled";
};
pci2: pcie@ffe202000 {
reg = <0xf 0xfe202000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
};
/include/ "p2041si-post.dtsi"