| /* |
| * T104xQDS Device Tree Source |
| * |
| * Copyright 2013 - 2015 Freescale Semiconductor Inc. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Freescale Semiconductor nor the |
| * names of its contributors may be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * |
| * ALTERNATIVELY, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") as published by the Free Software |
| * Foundation, either version 2 of that License or (at your option) any |
| * later version. |
| * |
| * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY |
| * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| / { |
| model = "fsl,T1040QDS"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| interrupt-parent = <&mpic>; |
| |
| aliases { |
| emi1_rgmii0 = &t1040mdio0; |
| emi1_rgmii1 = &t1040mdio1; |
| emi1_slot3 = &t1040mdio3; |
| emi1_slot5 = &t1040mdio5; |
| emi1_slot6 = &t1040mdio6; |
| emi1_slot7 = &t1040mdio7; |
| rgmii_phy1 = &rgmii_phy1; |
| rgmii_phy2 = &rgmii_phy2; |
| phy_s3_01 = &phy_s3_01; |
| phy_s3_02 = &phy_s3_02; |
| phy_s3_03 = &phy_s3_03; |
| phy_s3_04 = &phy_s3_04; |
| phy_s5_01 = &phy_s5_01; |
| phy_s5_02 = &phy_s5_02; |
| phy_s5_03 = &phy_s5_03; |
| phy_s5_04 = &phy_s5_04; |
| phy_s6_01 = &phy_s6_01; |
| phy_s6_02 = &phy_s6_02; |
| phy_s6_03 = &phy_s6_03; |
| phy_s6_04 = &phy_s6_04; |
| phy_s7_01 = &phy_s7_01; |
| phy_s7_02 = &phy_s7_02; |
| phy_s7_03 = &phy_s7_03; |
| phy_s7_04 = &phy_s7_04; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| bman_fbpr: bman-fbpr { |
| size = <0 0x1000000>; |
| alignment = <0 0x1000000>; |
| }; |
| qman_fqd: qman-fqd { |
| size = <0 0x400000>; |
| alignment = <0 0x400000>; |
| }; |
| qman_pfdr: qman-pfdr { |
| size = <0 0x2000000>; |
| alignment = <0 0x2000000>; |
| }; |
| }; |
| |
| ifc: localbus@ffe124000 { |
| reg = <0xf 0xfe124000 0 0x2000>; |
| ranges = <0 0 0xf 0xe8000000 0x08000000 |
| 2 0 0xf 0xff800000 0x00010000 |
| 3 0 0xf 0xffdf0000 0x00008000>; |
| |
| nor@0,0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "cfi-flash"; |
| reg = <0x0 0x0 0x8000000>; |
| |
| bank-width = <2>; |
| device-width = <1>; |
| }; |
| |
| nand@2,0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,ifc-nand"; |
| reg = <0x2 0x0 0x10000>; |
| }; |
| |
| board-control@3,0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,fpga-qixis"; |
| reg = <3 0 0x300>; |
| ranges = <0 3 0 0x300>; |
| |
| mdio-mux-emi1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "mdio-mux-mmioreg", "mdio-mux"; |
| mdio-parent-bus = <&mdio0>; |
| reg = <0x54 1>; |
| mux-mask = <0xe0>; |
| |
| t1040mdio0: mdio@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x00>; |
| status = "disabled"; |
| |
| rgmii_phy1: ethernet-phy@1 { |
| reg = <0x1>; |
| }; |
| }; |
| |
| t1040mdio1: mdio@20 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x20>; |
| status = "disabled"; |
| |
| rgmii_phy2: ethernet-phy@2 { |
| reg = <0x2>; |
| }; |
| }; |
| |
| t1040mdio3: mdio@60 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x60>; |
| status = "disabled"; |
| |
| phy_s3_01: ethernet-phy@1c { |
| reg = <0x1c>; |
| }; |
| |
| phy_s3_02: ethernet-phy@1d { |
| reg = <0x1d>; |
| }; |
| |
| phy_s3_03: ethernet-phy@1e { |
| reg = <0x1e>; |
| }; |
| |
| phy_s3_04: ethernet-phy@1f { |
| reg = <0x1f>; |
| }; |
| }; |
| |
| t1040mdio5: mdio@a0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xa0>; |
| |
| phy_s5_01: ethernet-phy@1c { |
| reg = <0x14>; |
| }; |
| |
| phy_s5_02: ethernet-phy@1d { |
| reg = <0x15>; |
| }; |
| |
| phy_s5_03: ethernet-phy@1e { |
| reg = <0x16>; |
| }; |
| |
| phy_s5_04: ethernet-phy@1f { |
| reg = <0x17>; |
| }; |
| }; |
| |
| t1040mdio6: mdio@c0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xc0>; |
| |
| phy_s6_01: ethernet-phy@1c { |
| reg = <0x18>; |
| }; |
| |
| phy_s6_02: ethernet-phy@1d { |
| reg = <0x19>; |
| }; |
| |
| phy_s6_03: ethernet-phy@1e { |
| reg = <0x1a>; |
| }; |
| |
| phy_s6_04: ethernet-phy@1f { |
| reg = <0x1b>; |
| }; |
| }; |
| |
| t1040mdio7: mdio@e0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xe0>; |
| status = "disabled"; |
| |
| phy_s7_01: ethernet-phy@1c { |
| reg = <0x1c>; |
| }; |
| |
| phy_s7_02: ethernet-phy@1d { |
| reg = <0x1d>; |
| }; |
| |
| phy_s7_03: ethernet-phy@1e { |
| reg = <0x1e>; |
| }; |
| |
| phy_s7_04: ethernet-phy@1f { |
| reg = <0x1f>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| }; |
| |
| dcsr: dcsr@f00000000 { |
| ranges = <0x00000000 0xf 0x00000000 0x01072000>; |
| }; |
| |
| bportals: bman-portals@ff4000000 { |
| ranges = <0x0 0xf 0xf4000000 0x2000000>; |
| }; |
| |
| qportals: qman-portals@ff6000000 { |
| ranges = <0x0 0xf 0xf6000000 0x2000000>; |
| }; |
| |
| soc: soc@ffe000000 { |
| ranges = <0x00000000 0xf 0xfe000000 0x1000000>; |
| reg = <0xf 0xfe000000 0 0x00001000>; |
| |
| spi@110000 { |
| flash@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "micron,n25q128a11", "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <10000000>; /* input clock */ |
| }; |
| }; |
| |
| i2c@118000 { |
| pca9547@77 { |
| compatible = "nxp,pca9547"; |
| reg = <0x77>; |
| }; |
| rtc@68 { |
| compatible = "dallas,ds3232"; |
| reg = <0x68>; |
| interrupts = <0x1 0x1 0 0>; |
| }; |
| }; |
| |
| fman@400000 { |
| ethernet@e0000 { |
| fixed-link = <0 1 1000 0 0>; |
| phy-connection-type = "sgmii"; |
| }; |
| |
| ethernet@e2000 { |
| fixed-link = <1 1 1000 0 0>; |
| phy-connection-type = "sgmii"; |
| }; |
| |
| ethernet@e4000 { |
| phy-handle = <&phy_s7_03>; |
| phy-connection-type = "sgmii"; |
| }; |
| |
| ethernet@e6000 { |
| phy-handle = <&rgmii_phy1>; |
| phy-connection-type = "rgmii"; |
| }; |
| |
| ethernet@e8000 { |
| phy-handle = <&rgmii_phy2>; |
| phy-connection-type = "rgmii"; |
| }; |
| }; |
| }; |
| |
| pci0: pcie@ffe240000 { |
| reg = <0xf 0xfe240000 0 0x10000>; |
| ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x10000000 |
| 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; |
| pcie@0 { |
| ranges = <0x02000000 0 0xe0000000 |
| 0x02000000 0 0xe0000000 |
| 0 0x10000000 |
| |
| 0x01000000 0 0x00000000 |
| 0x01000000 0 0x00000000 |
| 0 0x00010000>; |
| }; |
| }; |
| |
| pci1: pcie@ffe250000 { |
| reg = <0xf 0xfe250000 0 0x10000>; |
| ranges = <0x02000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000 |
| 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; |
| pcie@0 { |
| ranges = <0x02000000 0 0xe0000000 |
| 0x02000000 0 0xe0000000 |
| 0 0x10000000 |
| |
| 0x01000000 0 0x00000000 |
| 0x01000000 0 0x00000000 |
| 0 0x00010000>; |
| }; |
| }; |
| |
| pci2: pcie@ffe260000 { |
| reg = <0xf 0xfe260000 0 0x10000>; |
| ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000 |
| 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; |
| pcie@0 { |
| ranges = <0x02000000 0 0xe0000000 |
| 0x02000000 0 0xe0000000 |
| 0 0x10000000 |
| |
| 0x01000000 0 0x00000000 |
| 0x01000000 0 0x00000000 |
| 0 0x00010000>; |
| }; |
| }; |
| |
| pci3: pcie@ffe270000 { |
| reg = <0xf 0xfe270000 0 0x10000>; |
| ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000 |
| 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; |
| pcie@0 { |
| ranges = <0x02000000 0 0xe0000000 |
| 0x02000000 0 0xe0000000 |
| 0 0x10000000 |
| |
| 0x01000000 0 0x00000000 |
| 0x01000000 0 0x00000000 |
| 0 0x00010000>; |
| }; |
| }; |
| |
| qe: qe@ffe140000 { |
| ranges = <0x0 0xf 0xfe140000 0x40000>; |
| reg = <0xf 0xfe140000 0 0x480>; |
| brg-frequency = <0>; |
| bus-frequency = <0>; |
| |
| si1: si@700 { |
| compatible = "fsl,t1040-qe-si"; |
| reg = <0x700 0x80>; |
| }; |
| |
| siram1: siram@1000 { |
| compatible = "fsl,t1040-qe-siram"; |
| reg = <0x1000 0x800>; |
| }; |
| |
| ucc_hdlc: ucc@2000 { |
| compatible = "fsl,ucc-hdlc"; |
| rx-clock-name = "clk8"; |
| tx-clock-name = "clk9"; |
| fsl,rx-sync-clock = "rsync_pin"; |
| fsl,tx-sync-clock = "tsync_pin"; |
| fsl,tx-timeslot-mask = <0xfffffffe>; |
| fsl,rx-timeslot-mask = <0xfffffffe>; |
| fsl,tdm-framer-type = "e1"; |
| fsl,tdm-id = <0>; |
| fsl,siram-entry-id = <0>; |
| fsl,tdm-interface; |
| }; |
| |
| ucc_serial: ucc@2200 { |
| compatible = "fsl,t1040-ucc-uart"; |
| port-number = <0>; |
| rx-clock-name = "brg2"; |
| tx-clock-name = "brg2"; |
| }; |
| }; |
| }; |
