| /* |
| * T4240QDS Device Tree Source |
| * |
| * Copyright 2012 - 2015 Freescale Semiconductor Inc. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Freescale Semiconductor nor the |
| * names of its contributors may be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * |
| * ALTERNATIVELY, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") as published by the Free Software |
| * Foundation, either version 2 of that License or (at your option) any |
| * later version. |
| * |
| * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY |
| * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| /include/ "t4240si-pre.dtsi" |
| |
| / { |
| model = "fsl,T4240QDS"; |
| compatible = "fsl,T4240QDS"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| interrupt-parent = <&mpic>; |
| |
| aliases{ |
| phy_rgmii1 = &phyrgmii1; |
| phy_rgmii2 = &phyrgmii2; |
| phy_sgmii3 = &phy3; |
| phy_sgmii4 = &phy4; |
| phy_sgmii11 = &phy11; |
| phy_sgmii12 = &phy12; |
| sgmii_phy11 = &sgmiiphy11; |
| sgmii_phy12 = &sgmiiphy12; |
| sgmii_phy13 = &sgmiiphy13; |
| sgmii_phy14 = &sgmiiphy14; |
| sgmii_phy21 = &sgmiiphy21; |
| sgmii_phy22 = &sgmiiphy22; |
| sgmii_phy23 = &sgmiiphy23; |
| sgmii_phy24 = &sgmiiphy24; |
| sgmii_phy31 = &sgmiiphy31; |
| sgmii_phy32 = &sgmiiphy32; |
| sgmii_phy33 = &sgmiiphy33; |
| sgmii_phy34 = &sgmiiphy34; |
| sgmii_phy41 = &sgmiiphy41; |
| sgmii_phy42 = &sgmiiphy42; |
| sgmii_phy43 = &sgmiiphy43; |
| sgmii_phy44 = &sgmiiphy44; |
| phy_xfi1 = &xfiphy1; |
| phy_xfi2 = &xfiphy2; |
| phy_xfi3 = &xfiphy3; |
| phy_xfi4 = &xfiphy4; |
| xfi_pcs_mdio1 = &xfimdio0; |
| xfi_pcs_mdio2 = &xfimdio1; |
| xfi_pcs_mdio3 = &xfimdio2; |
| xfi_pcs_mdio4 = &xfimdio3; |
| emi1_rgmii = &t4240mdio0; |
| emi1_slot1 = &t4240mdio1; |
| emi1_slot2 = &t4240mdio2; |
| emi1_slot3 = &t4240mdio3; |
| emi1_slot4 = &t4240mdio4; |
| }; |
| |
| ifc: localbus@ffe124000 { |
| reg = <0xf 0xfe124000 0 0x2000>; |
| ranges = <0 0 0xf 0xe8000000 0x08000000 |
| 2 0 0xf 0xff800000 0x00010000 |
| 3 0 0xf 0xffdf0000 0x00008000>; |
| |
| nor@0,0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "cfi-flash"; |
| reg = <0x0 0x0 0x8000000>; |
| |
| bank-width = <2>; |
| device-width = <1>; |
| }; |
| |
| nand@2,0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,ifc-nand"; |
| reg = <0x2 0x0 0x10000>; |
| |
| partition@0 { |
| /* This location must not be altered */ |
| /* 1MB for u-boot Bootloader Image */ |
| reg = <0x0 0x00100000>; |
| label = "NAND U-Boot Image"; |
| read-only; |
| }; |
| |
| partition@100000 { |
| /* 1MB for DTB Image */ |
| reg = <0x00100000 0x00100000>; |
| label = "NAND DTB Image"; |
| }; |
| |
| partition@200000 { |
| /* 10MB for Linux Kernel Image */ |
| reg = <0x00200000 0x00A00000>; |
| label = "NAND Linux Kernel Image"; |
| }; |
| |
| partition@C00000 { |
| /* 500MB for Root file System Image */ |
| reg = <0x00c00000 0x1F400000>; |
| label = "NAND RFS Image"; |
| }; |
| }; |
| |
| board-control@3,0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,t4240qds-fpga", "fsl,fpga-qixis"; |
| reg = <3 0 0x300>; |
| ranges = <0 3 0 0x300>; |
| |
| mdio-mux-emi1 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "mdio-mux-mmioreg", "mdio-mux"; |
| mdio-parent-bus = <&mdio1>; |
| reg = <0x54 1>; |
| mux-mask = <0xe0>; |
| |
| t4240mdio0: mdio@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| |
| phyrgmii1: ethernet-phy@1 { |
| reg = <0x1>; |
| }; |
| |
| phyrgmii2: ethernet-phy@2 { |
| reg = <0x2>; |
| }; |
| }; |
| |
| t4240mdio1: mdio@20 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x20>; |
| status = "disabled"; |
| |
| phy1: ethernet-phy@0 { |
| reg = <0x0>; |
| }; |
| |
| phy2: ethernet-phy@1 { |
| reg = <0x1>; |
| }; |
| |
| phy3: ethernet-phy@2 { |
| reg = <0x2>; |
| }; |
| |
| phy4: ethernet-phy@3 { |
| reg = <0x3>; |
| }; |
| |
| sgmiiphy11: ethernet-phy@1c { |
| reg = <0x1c>; |
| }; |
| |
| sgmiiphy12: ethernet-phy@1d { |
| reg = <0x1d>; |
| }; |
| |
| sgmiiphy13: ethernet-phy@1e { |
| reg = <0x1e>; |
| }; |
| |
| sgmiiphy14: ethernet-phy@1f { |
| reg = <0x1f>; |
| }; |
| }; |
| |
| t4240mdio2: mdio@40 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x40>; |
| status = "disabled"; |
| |
| phy5: ethernet-phy@4 { |
| reg = <0x4>; |
| }; |
| |
| phy6: ethernet-phy@5 { |
| reg = <0x5>; |
| }; |
| |
| phy7: ethernet-phy@6 { |
| reg = <0x6>; |
| }; |
| |
| phy8: ethernet-phy@7 { |
| reg = <0x7>; |
| }; |
| |
| sgmiiphy21: ethernet-phy@1c { |
| reg = <0x1c>; |
| }; |
| |
| sgmiiphy22: ethernet-phy@1d { |
| reg = <0x1d>; |
| }; |
| |
| sgmiiphy23: ethernet-phy@1e { |
| reg = <0x1e>; |
| }; |
| |
| sgmiiphy24: ethernet-phy@1f { |
| reg = <0x1f>; |
| }; |
| }; |
| |
| t4240mdio3: mdio@60 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x60>; |
| status = "disabled"; |
| |
| phy9: ethernet-phy@8 { |
| reg = <0x8>; |
| }; |
| |
| phy10: ethernet-phy@9 { |
| reg = <0x9>; |
| }; |
| |
| phy11: ethernet-phy@a { |
| reg = <0xa>; |
| }; |
| |
| phy12: ethernet-phy@b { |
| reg = <0xb>; |
| }; |
| |
| sgmiiphy31: ethernet-phy@1c { |
| reg = <0x1c>; |
| }; |
| |
| sgmiiphy32: ethernet-phy@1d { |
| reg = <0x1d>; |
| }; |
| |
| sgmiiphy33: ethernet-phy@1e { |
| reg = <0x1e>; |
| }; |
| |
| sgmiiphy34: ethernet-phy@1f { |
| reg = <0x1f>; |
| }; |
| }; |
| |
| t4240mdio4: mdio@80 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x80>; |
| status = "disabled"; |
| |
| phy13: ethernet-phy@c { |
| reg = <0xc>; |
| }; |
| |
| phy14: ethernet-phy@d { |
| reg = <0xd>; |
| }; |
| |
| phy15: ethernet-phy@e { |
| reg = <0xe>; |
| }; |
| |
| phy16: ethernet-phy@f { |
| reg = <0xf>; |
| }; |
| |
| sgmiiphy41: ethernet-phy@1c { |
| reg = <0x1c>; |
| }; |
| |
| sgmiiphy42: ethernet-phy@1d { |
| reg = <0x1d>; |
| }; |
| |
| sgmiiphy43: ethernet-phy@1e { |
| reg = <0x1e>; |
| }; |
| |
| sgmiiphy44: ethernet-phy@1f { |
| reg = <0x1f>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| bman_fbpr: bman-fbpr { |
| size = <0 0x1000000>; |
| alignment = <0 0x1000000>; |
| }; |
| qman_fqd: qman-fqd { |
| size = <0 0x400000>; |
| alignment = <0 0x400000>; |
| }; |
| qman_pfdr: qman-pfdr { |
| size = <0 0x2000000>; |
| alignment = <0 0x2000000>; |
| }; |
| }; |
| |
| dcsr: dcsr@f00000000 { |
| ranges = <0x00000000 0xf 0x00000000 0x01072000>; |
| }; |
| |
| bportals: bman-portals@ff4000000 { |
| ranges = <0x0 0xf 0xf4000000 0x2000000>; |
| }; |
| |
| qportals: qman-portals@ff6000000 { |
| ranges = <0x0 0xf 0xf6000000 0x2000000>; |
| }; |
| |
| soc: soc@ffe000000 { |
| ranges = <0x00000000 0xf 0xfe000000 0x1000000>; |
| reg = <0xf 0xfe000000 0 0x00001000>; |
| spi@110000 { |
| flash@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "sst,sst25wf040", "jedec,spi-nor"; |
| reg = <0>; |
| spi-max-frequency = <40000000>; /* input clock */ |
| }; |
| }; |
| |
| i2c@118000 { |
| mux@77 { |
| compatible = "nxp,pca9547"; |
| reg = <0x77>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| i2c@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| |
| eeprom@51 { |
| compatible = "atmel,24c256"; |
| reg = <0x51>; |
| }; |
| eeprom@52 { |
| compatible = "atmel,24c256"; |
| reg = <0x52>; |
| }; |
| eeprom@53 { |
| compatible = "atmel,24c256"; |
| reg = <0x53>; |
| }; |
| eeprom@54 { |
| compatible = "atmel,24c256"; |
| reg = <0x54>; |
| }; |
| eeprom@55 { |
| compatible = "atmel,24c256"; |
| reg = <0x55>; |
| }; |
| eeprom@56 { |
| compatible = "atmel,24c256"; |
| reg = <0x56>; |
| }; |
| rtc@68 { |
| compatible = "dallas,ds3232"; |
| reg = <0x68>; |
| interrupts = <0x1 0x1 0 0>; |
| }; |
| }; |
| |
| i2c@2 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x2>; |
| |
| ina220@40 { |
| compatible = "ti,ina220"; |
| reg = <0x40>; |
| shunt-resistor = <1000>; |
| }; |
| |
| ina220@41 { |
| compatible = "ti,ina220"; |
| reg = <0x41>; |
| shunt-resistor = <1000>; |
| }; |
| |
| ina220@44 { |
| compatible = "ti,ina220"; |
| reg = <0x44>; |
| shunt-resistor = <1000>; |
| }; |
| |
| ina220@45 { |
| compatible = "ti,ina220"; |
| reg = <0x45>; |
| shunt-resistor = <1000>; |
| }; |
| |
| ina220@46 { |
| compatible = "ti,ina220"; |
| reg = <0x46>; |
| shunt-resistor = <1000>; |
| }; |
| |
| ina220@47 { |
| compatible = "ti,ina220"; |
| reg = <0x47>; |
| shunt-resistor = <1000>; |
| }; |
| }; |
| }; |
| }; |
| |
| sdhc@114000 { |
| voltage-ranges = <1800 1800 3300 3300>; |
| }; |
| |
| fman@400000 { |
| port@83000 { |
| status = "disabled"; |
| }; |
| |
| port@84000 { |
| status = "disabled"; |
| }; |
| |
| port@85000 { |
| status = "disabled"; |
| }; |
| |
| port@86000 { |
| status = "disabled"; |
| }; |
| |
| port@87000 { |
| status = "disabled"; |
| }; |
| |
| ethernet@e0000 { |
| phy-handle = <&phy5>; |
| phy-connection-type = "sgmii"; |
| }; |
| |
| ethernet@e2000 { |
| phy-handle = <&phy6>; |
| phy-connection-type = "sgmii"; |
| }; |
| |
| ethernet@e4000 { |
| phy-handle = <&phy7>; |
| phy-connection-type = "sgmii"; |
| }; |
| |
| ethernet@e6000 { |
| phy-handle = <&phy8>; |
| phy-connection-type = "sgmii"; |
| }; |
| |
| ethernet@e8000 { |
| phy-handle = <&phyrgmii2>; |
| phy-connection-type = "rgmii"; |
| }; |
| |
| ethernet@ea000 { |
| phy-handle = <&phy2>; |
| phy-connection-type = "sgmii"; |
| }; |
| |
| ethernet@f0000 { |
| phy-handle = <&xauiphy1>; |
| phy-connection-type = "xgmii"; |
| }; |
| |
| ethernet@f2000 { |
| phy-handle = <&xauiphy2>; |
| phy-connection-type = "xgmii"; |
| }; |
| |
| xfimdio0: mdio@f1000 { |
| status = "disabled"; |
| |
| xfiphy1: ethernet-phy@0 { |
| compatible = "ethernet-phy-ieee802.3-c45"; |
| reg = <0x0>; |
| }; |
| }; |
| |
| xfimdio1: mdio@f3000 { |
| status = "disabled"; |
| |
| xfiphy2: ethernet-phy@0 { |
| compatible = "ethernet-phy-ieee802.3-c45"; |
| reg = <0x0>; |
| }; |
| }; |
| }; |
| |
| fman@500000 { |
| port@84000 { |
| status = "disabled"; |
| }; |
| |
| port@85000 { |
| status = "disabled"; |
| }; |
| |
| port@86000 { |
| status = "disabled"; |
| }; |
| |
| port@87000 { |
| status = "disabled"; |
| }; |
| |
| ethernet@e0000 { |
| phy-handle = <&phy13>; |
| phy-connection-type = "sgmii"; |
| }; |
| |
| ethernet@e2000 { |
| phy-handle = <&phy14>; |
| phy-connection-type = "sgmii"; |
| }; |
| |
| ethernet@e4000 { |
| phy-handle = <&phy15>; |
| phy-connection-type = "sgmii"; |
| }; |
| |
| ethernet@e6000 { |
| phy-handle = <&phy16>; |
| phy-connection-type = "sgmii"; |
| }; |
| |
| ethernet@e8000 { |
| phy-handle = <&phyrgmii1>; |
| phy-connection-type = "rgmii"; |
| }; |
| |
| ethernet@ea000 { |
| phy-handle = <&phy10>; |
| phy-connection-type = "sgmii"; |
| }; |
| |
| ethernet@f0000 { |
| phy-handle = <&xauiphy3>; |
| phy-connection-type = "xgmii"; |
| }; |
| |
| ethernet@f2000 { |
| phy-handle = <&xauiphy4>; |
| phy-connection-type = "xgmii"; |
| }; |
| |
| xfimdio2: mdio@f1000 { |
| status = "disabled"; |
| |
| xfiphy3: ethernet-phy@0 { |
| compatible = "ethernet-phy-ieee802.3-c45"; |
| reg = <0x0>; |
| }; |
| }; |
| |
| xfimdio3: mdio@f3000 { |
| status = "disabled"; |
| |
| xfiphy4: ethernet-phy@0 { |
| compatible = "ethernet-phy-ieee802.3-c45"; |
| reg = <0x0>; |
| }; |
| }; |
| |
| mdio@fd000 { |
| xauiphy1: ethernet-phy@0 { |
| compatible = "ethernet-phy-ieee802.3-c45"; |
| reg = <0x0>; |
| }; |
| |
| xauiphy2: ethernet-phy@1 { |
| compatible = "ethernet-phy-ieee802.3-c45"; |
| reg = <0x1>; |
| }; |
| |
| xauiphy3: ethernet-phy@2 { |
| compatible = "ethernet-phy-ieee802.3-c45"; |
| reg = <0x2>; |
| }; |
| |
| xauiphy4: ethernet-phy@3 { |
| compatible = "ethernet-phy-ieee802.3-c45"; |
| reg = <0x3>; |
| }; |
| }; |
| }; |
| }; |
| |
| pci0: pcie@ffe240000 { |
| reg = <0xf 0xfe240000 0 0x10000>; |
| ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 |
| 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; |
| pcie@0 { |
| ranges = <0x02000000 0 0xe0000000 |
| 0x02000000 0 0xe0000000 |
| 0 0x20000000 |
| |
| 0x01000000 0 0x00000000 |
| 0x01000000 0 0x00000000 |
| 0 0x00010000>; |
| }; |
| }; |
| |
| pci1: pcie@ffe250000 { |
| reg = <0xf 0xfe250000 0 0x10000>; |
| ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 |
| 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; |
| pcie@0 { |
| ranges = <0x02000000 0 0xe0000000 |
| 0x02000000 0 0xe0000000 |
| 0 0x20000000 |
| |
| 0x01000000 0 0x00000000 |
| 0x01000000 0 0x00000000 |
| 0 0x00010000>; |
| }; |
| }; |
| |
| pci2: pcie@ffe260000 { |
| reg = <0xf 0xfe260000 0 0x1000>; |
| ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 |
| 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; |
| pcie@0 { |
| ranges = <0x02000000 0 0xe0000000 |
| 0x02000000 0 0xe0000000 |
| 0 0x20000000 |
| |
| 0x01000000 0 0x00000000 |
| 0x01000000 0 0x00000000 |
| 0 0x00010000>; |
| }; |
| }; |
| |
| pci3: pcie@ffe270000 { |
| reg = <0xf 0xfe270000 0 0x10000>; |
| ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000 |
| 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; |
| pcie@0 { |
| ranges = <0x02000000 0 0xe0000000 |
| 0x02000000 0 0xe0000000 |
| 0 0x20000000 |
| |
| 0x01000000 0 0x00000000 |
| 0x01000000 0 0x00000000 |
| 0 0x00010000>; |
| }; |
| }; |
| rio: rapidio@ffe0c0000 { |
| reg = <0xf 0xfe0c0000 0 0x11000>; |
| |
| port1 { |
| ranges = <0 0 0xc 0x20000000 0 0x10000000>; |
| }; |
| port2 { |
| ranges = <0 0 0xc 0x30000000 0 0x10000000>; |
| }; |
| }; |
| }; |
| |
| /include/ "t4240si-post.dtsi" |
