Google Git
Sign in
android-kvm / linux / 9c0c4d24ac000e52d55348961d3a3ba42065e0cf / . / drivers / gpu / drm / amd / include / atomfirmware.h
blob: 44955458fe38193db56852f25ff6acd723ff245d [file] [log] [blame]
/****************************************************************************\
*
* File Name atomfirmware.h
* Project This is an interface header file between atombios and OS GPU drivers for SoC15 products
*
* Description header file of general definitions for OS nd pre-OS video drivers
*
* Copyright 2014 Advanced Micro Devices, Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
* and associated documentation files (the "Software"), to deal in the Software without restriction,
* including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all copies or substantial
* portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
\****************************************************************************/
/*IMPORTANT NOTES
* If a change in VBIOS/Driver/Tool's interface is only needed for SoC15 and forward products, then the change is only needed in this atomfirmware.h header file.
* If a change in VBIOS/Driver/Tool's interface is only needed for pre-SoC15 products, then the change is only needed in atombios.h header file.
* If a change is needed for both pre and post SoC15 products, then the change has to be made separately and might be differently in both atomfirmware.h and atombios.h.
*/
#ifndef _ATOMFIRMWARE_H_
#define _ATOMFIRMWARE_H_
enum atom_bios_header_version_def{
ATOM_MAJOR_VERSION =0x0003,
ATOM_MINOR_VERSION =0x0003,
};
#ifdef _H2INC
#ifndef uint32_t
typedef unsigned long uint32_t;
#endif
#ifndef uint16_t
typedef unsigned short uint16_t;
#endif
#ifndef uint8_t
typedef unsigned char uint8_t;
#endif
#endif
enum atom_crtc_def{
ATOM_CRTC1 =0,
ATOM_CRTC2 =1,
ATOM_CRTC3 =2,
ATOM_CRTC4 =3,
ATOM_CRTC5 =4,
ATOM_CRTC6 =5,
ATOM_CRTC_INVALID =0xff,
};
enum atom_ppll_def{
ATOM_PPLL0 =2,
ATOM_GCK_DFS =8,
ATOM_FCH_CLK =9,
ATOM_DP_DTO =11,
ATOM_COMBOPHY_PLL0 =20,
ATOM_COMBOPHY_PLL1 =21,
ATOM_COMBOPHY_PLL2 =22,
ATOM_COMBOPHY_PLL3 =23,
ATOM_COMBOPHY_PLL4 =24,
ATOM_COMBOPHY_PLL5 =25,
ATOM_PPLL_INVALID =0xff,
};
// define ASIC internal encoder id ( bit vector ), used for CRTC_SourceSel
enum atom_dig_def{
ASIC_INT_DIG1_ENCODER_ID =0x03,
ASIC_INT_DIG2_ENCODER_ID =0x09,
ASIC_INT_DIG3_ENCODER_ID =0x0a,
ASIC_INT_DIG4_ENCODER_ID =0x0b,
ASIC_INT_DIG5_ENCODER_ID =0x0c,
ASIC_INT_DIG6_ENCODER_ID =0x0d,
ASIC_INT_DIG7_ENCODER_ID =0x0e,
};
//ucEncoderMode
enum atom_encode_mode_def
{
ATOM_ENCODER_MODE_DP =0,
ATOM_ENCODER_MODE_DP_SST =0,
ATOM_ENCODER_MODE_LVDS =1,
ATOM_ENCODER_MODE_DVI =2,
ATOM_ENCODER_MODE_HDMI =3,
ATOM_ENCODER_MODE_DP_AUDIO =5,
ATOM_ENCODER_MODE_DP_MST =5,
ATOM_ENCODER_MODE_CRT =15,
ATOM_ENCODER_MODE_DVO =16,
};
enum atom_encoder_refclk_src_def{
ENCODER_REFCLK_SRC_P1PLL =0,
ENCODER_REFCLK_SRC_P2PLL =1,
ENCODER_REFCLK_SRC_P3PLL =2,
ENCODER_REFCLK_SRC_EXTCLK =3,
ENCODER_REFCLK_SRC_INVALID =0xff,
};
enum atom_scaler_def{
ATOM_SCALER_DISABLE =0, /*scaler bypass mode, auto-center & no replication*/
ATOM_SCALER_CENTER =1, //For Fudo, it's bypass and auto-center & auto replication
ATOM_SCALER_EXPANSION =2, /*scaler expansion by 2 tap alpha blending mode*/
};
enum atom_operation_def{
ATOM_DISABLE = 0,
ATOM_ENABLE = 1,
ATOM_INIT = 7,
ATOM_GET_STATUS = 8,
};
enum atom_embedded_display_op_def{
ATOM_LCD_BL_OFF = 2,
ATOM_LCD_BL_OM = 3,
ATOM_LCD_BL_BRIGHTNESS_CONTROL = 4,
ATOM_LCD_SELFTEST_START = 5,
ATOM_LCD_SELFTEST_STOP = 6,
};
enum atom_spread_spectrum_mode{
ATOM_SS_CENTER_OR_DOWN_MODE_MASK = 0x01,
ATOM_SS_DOWN_SPREAD_MODE = 0x00,
ATOM_SS_CENTRE_SPREAD_MODE = 0x01,
ATOM_INT_OR_EXT_SS_MASK = 0x02,
ATOM_INTERNAL_SS_MASK = 0x00,
ATOM_EXTERNAL_SS_MASK = 0x02,
};
/* define panel bit per color */
enum atom_panel_bit_per_color{
PANEL_BPC_UNDEFINE =0x00,
PANEL_6BIT_PER_COLOR =0x01,
PANEL_8BIT_PER_COLOR =0x02,
PANEL_10BIT_PER_COLOR =0x03,
PANEL_12BIT_PER_COLOR =0x04,
PANEL_16BIT_PER_COLOR =0x05,
};
//ucVoltageType
enum atom_voltage_type
{
VOLTAGE_TYPE_VDDC = 1,
VOLTAGE_TYPE_MVDDC = 2,
VOLTAGE_TYPE_MVDDQ = 3,
VOLTAGE_TYPE_VDDCI = 4,
VOLTAGE_TYPE_VDDGFX = 5,
VOLTAGE_TYPE_PCC = 6,
VOLTAGE_TYPE_MVPP = 7,
VOLTAGE_TYPE_LEDDPM = 8,
VOLTAGE_TYPE_PCC_MVDD = 9,
VOLTAGE_TYPE_PCIE_VDDC = 10,
VOLTAGE_TYPE_PCIE_VDDR = 11,
VOLTAGE_TYPE_GENERIC_I2C_1 = 0x11,
VOLTAGE_TYPE_GENERIC_I2C_2 = 0x12,
VOLTAGE_TYPE_GENERIC_I2C_3 = 0x13,
VOLTAGE_TYPE_GENERIC_I2C_4 = 0x14,
VOLTAGE_TYPE_GENERIC_I2C_5 = 0x15,
VOLTAGE_TYPE_GENERIC_I2C_6 = 0x16,
VOLTAGE_TYPE_GENERIC_I2C_7 = 0x17,
VOLTAGE_TYPE_GENERIC_I2C_8 = 0x18,
VOLTAGE_TYPE_GENERIC_I2C_9 = 0x19,
VOLTAGE_TYPE_GENERIC_I2C_10 = 0x1A,
};
enum atom_dgpu_vram_type {
ATOM_DGPU_VRAM_TYPE_GDDR5 = 0x50,
ATOM_DGPU_VRAM_TYPE_HBM2 = 0x60,
ATOM_DGPU_VRAM_TYPE_HBM2E = 0x61,
ATOM_DGPU_VRAM_TYPE_GDDR6 = 0x70,
};
enum atom_dp_vs_preemph_def{
DP_VS_LEVEL0_PREEMPH_LEVEL0 = 0x00,
DP_VS_LEVEL1_PREEMPH_LEVEL0 = 0x01,
DP_VS_LEVEL2_PREEMPH_LEVEL0 = 0x02,
DP_VS_LEVEL3_PREEMPH_LEVEL0 = 0x03,
DP_VS_LEVEL0_PREEMPH_LEVEL1 = 0x08,
DP_VS_LEVEL1_PREEMPH_LEVEL1 = 0x09,
DP_VS_LEVEL2_PREEMPH_LEVEL1 = 0x0a,
DP_VS_LEVEL0_PREEMPH_LEVEL2 = 0x10,
DP_VS_LEVEL1_PREEMPH_LEVEL2 = 0x11,
DP_VS_LEVEL0_PREEMPH_LEVEL3 = 0x18,
};
#define BIOS_ATOM_PREFIX "ATOMBIOS"
#define BIOS_VERSION_PREFIX "ATOMBIOSBK-AMD"
#define BIOS_STRING_LENGTH 43
/*
enum atom_string_def{
asic_bus_type_pcie_string = "PCI_EXPRESS",
atom_fire_gl_string = "FGL",
atom_bios_string = "ATOM"
};
*/
#pragma pack(1) /* BIOS data must use byte aligment*/
enum atombios_image_offset{
OFFSET_TO_ATOM_ROM_HEADER_POINTER = 0x00000048,
OFFSET_TO_ATOM_ROM_IMAGE_SIZE = 0x00000002,
OFFSET_TO_ATOMBIOS_ASIC_BUS_MEM_TYPE = 0x94,
MAXSIZE_OF_ATOMBIOS_ASIC_BUS_MEM_TYPE = 20, /*including the terminator 0x0!*/
OFFSET_TO_GET_ATOMBIOS_NUMBER_OF_STRINGS = 0x2f,
OFFSET_TO_GET_ATOMBIOS_STRING_START = 0x6e,
OFFSET_TO_VBIOS_PART_NUMBER = 0x80,
OFFSET_TO_VBIOS_DATE = 0x50,
};
/****************************************************************************
* Common header for all tables (Data table, Command function).
* Every table pointed in _ATOM_MASTER_DATA_TABLE has this common header.
* And the pointer actually points to this header.
****************************************************************************/
struct atom_common_table_header
{
uint16_t structuresize;
uint8_t format_revision; //mainly used for a hw function, when the parser is not backward compatible
uint8_t content_revision; //change it when a data table has a structure change, or a hw function has a input/output parameter change
};
/****************************************************************************
* Structure stores the ROM header.
****************************************************************************/
struct atom_rom_header_v2_2
{
struct atom_common_table_header table_header;
uint8_t atom_bios_string[4]; //enum atom_string_def atom_bios_string; //Signature to distinguish between Atombios and non-atombios,
uint16_t bios_segment_address;
uint16_t protectedmodeoffset;
uint16_t configfilenameoffset;
uint16_t crc_block_offset;
uint16_t vbios_bootupmessageoffset;
uint16_t int10_offset;
uint16_t pcibusdevinitcode;
uint16_t iobaseaddress;
uint16_t subsystem_vendor_id;
uint16_t subsystem_id;
uint16_t pci_info_offset;
uint16_t masterhwfunction_offset; //Offest for SW to get all command function offsets, Don't change the position
uint16_t masterdatatable_offset; //Offest for SW to get all data table offsets, Don't change the position
uint16_t reserved;
uint32_t pspdirtableoffset;
};
/*==============================hw function portion======================================================================*/
/****************************************************************************
* Structures used in Command.mtb, each function name is not given here since those function could change from time to time
* The real functionality of each function is associated with the parameter structure version when defined
* For all internal cmd function definitions, please reference to atomstruct.h
****************************************************************************/
struct atom_master_list_of_command_functions_v2_1{
uint16_t asic_init; //Function
uint16_t cmd_function1; //used as an internal one
uint16_t cmd_function2; //used as an internal one
uint16_t cmd_function3; //used as an internal one
uint16_t digxencodercontrol; //Function
uint16_t cmd_function5; //used as an internal one
uint16_t cmd_function6; //used as an internal one
uint16_t cmd_function7; //used as an internal one
uint16_t cmd_function8; //used as an internal one
uint16_t cmd_function9; //used as an internal one
uint16_t setengineclock; //Function
uint16_t setmemoryclock; //Function
uint16_t setpixelclock; //Function
uint16_t enabledisppowergating; //Function
uint16_t cmd_function14; //used as an internal one
uint16_t cmd_function15; //used as an internal one
uint16_t cmd_function16; //used as an internal one
uint16_t cmd_function17; //used as an internal one
uint16_t cmd_function18; //used as an internal one
uint16_t cmd_function19; //used as an internal one
uint16_t cmd_function20; //used as an internal one
uint16_t cmd_function21; //used as an internal one
uint16_t cmd_function22; //used as an internal one
uint16_t cmd_function23; //used as an internal one
uint16_t cmd_function24; //used as an internal one
uint16_t cmd_function25; //used as an internal one
uint16_t cmd_function26; //used as an internal one
uint16_t cmd_function27; //used as an internal one
uint16_t cmd_function28; //used as an internal one
uint16_t cmd_function29; //used as an internal one
uint16_t cmd_function30; //used as an internal one
uint16_t cmd_function31; //used as an internal one
uint16_t cmd_function32; //used as an internal one
uint16_t cmd_function33; //used as an internal one
uint16_t blankcrtc; //Function
uint16_t enablecrtc; //Function
uint16_t cmd_function36; //used as an internal one
uint16_t cmd_function37; //used as an internal one
uint16_t cmd_function38; //used as an internal one
uint16_t cmd_function39; //used as an internal one
uint16_t cmd_function40; //used as an internal one
uint16_t getsmuclockinfo; //Function
uint16_t selectcrtc_source; //Function
uint16_t cmd_function43; //used as an internal one
uint16_t cmd_function44; //used as an internal one
uint16_t cmd_function45; //used as an internal one
uint16_t setdceclock; //Function
uint16_t getmemoryclock; //Function
uint16_t getengineclock; //Function
uint16_t setcrtc_usingdtdtiming; //Function
uint16_t externalencodercontrol; //Function
uint16_t cmd_function51; //used as an internal one
uint16_t cmd_function52; //used as an internal one
uint16_t cmd_function53; //used as an internal one
uint16_t processi2cchanneltransaction;//Function
uint16_t cmd_function55; //used as an internal one
uint16_t cmd_function56; //used as an internal one
uint16_t cmd_function57; //used as an internal one
uint16_t cmd_function58; //used as an internal one
uint16_t cmd_function59; //used as an internal one
uint16_t computegpuclockparam; //Function
uint16_t cmd_function61; //used as an internal one
uint16_t cmd_function62; //used as an internal one
uint16_t dynamicmemorysettings; //Function function
uint16_t memorytraining; //Function function
uint16_t cmd_function65; //used as an internal one
uint16_t cmd_function66; //used as an internal one
uint16_t setvoltage; //Function
uint16_t cmd_function68; //used as an internal one
uint16_t readefusevalue; //Function
uint16_t cmd_function70; //used as an internal one
uint16_t cmd_function71; //used as an internal one
uint16_t cmd_function72; //used as an internal one
uint16_t cmd_function73; //used as an internal one
uint16_t cmd_function74; //used as an internal one
uint16_t cmd_function75; //used as an internal one
uint16_t dig1transmittercontrol; //Function
uint16_t cmd_function77; //used as an internal one
uint16_t processauxchanneltransaction;//Function
uint16_t cmd_function79; //used as an internal one
uint16_t getvoltageinfo; //Function
};
struct atom_master_command_function_v2_1
{
struct atom_common_table_header table_header;
struct atom_master_list_of_command_functions_v2_1 listofcmdfunctions;
};
/****************************************************************************
* Structures used in every command function
****************************************************************************/
struct atom_function_attribute
{
uint16_t ws_in_bytes:8; //[7:0]=Size of workspace in Bytes (in multiple of a dword),
uint16_t ps_in_bytes:7; //[14:8]=Size of parameter space in Bytes (multiple of a dword),
uint16_t updated_by_util:1; //[15]=flag to indicate the function is updated by util
};
/****************************************************************************
* Common header for all hw functions.
* Every function pointed by _master_list_of_hw_function has this common header.
* And the pointer actually points to this header.
****************************************************************************/
struct atom_rom_hw_function_header
{
struct atom_common_table_header func_header;
struct atom_function_attribute func_attrib;
};
/*==============================sw data table portion======================================================================*/
/****************************************************************************
* Structures used in data.mtb, each data table name is not given here since those data table could change from time to time
* The real name of each table is given when its data structure version is defined
****************************************************************************/
struct atom_master_list_of_data_tables_v2_1{
uint16_t utilitypipeline; /* Offest for the utility to get parser info,Don't change this position!*/
uint16_t multimedia_info;
uint16_t smc_dpm_info;
uint16_t sw_datatable3;
uint16_t firmwareinfo; /* Shared by various SW components */
uint16_t sw_datatable5;
uint16_t lcd_info; /* Shared by various SW components */
uint16_t sw_datatable7;
uint16_t smu_info;
uint16_t sw_datatable9;
uint16_t sw_datatable10;
uint16_t vram_usagebyfirmware; /* Shared by various SW components */
uint16_t gpio_pin_lut; /* Shared by various SW components */
uint16_t sw_datatable13;
uint16_t gfx_info;
uint16_t powerplayinfo; /* Shared by various SW components */
uint16_t sw_datatable16;
uint16_t sw_datatable17;
uint16_t sw_datatable18;
uint16_t sw_datatable19;
uint16_t sw_datatable20;
uint16_t sw_datatable21;
uint16_t displayobjectinfo; /* Shared by various SW components */
uint16_t indirectioaccess; /* used as an internal one */
uint16_t umc_info; /* Shared by various SW components */
uint16_t sw_datatable25;
uint16_t sw_datatable26;
uint16_t dce_info; /* Shared by various SW components */
uint16_t vram_info; /* Shared by various SW components */
uint16_t sw_datatable29;
uint16_t integratedsysteminfo; /* Shared by various SW components */
uint16_t asic_profiling_info; /* Shared by various SW components */
uint16_t voltageobject_info; /* shared by various SW components */
uint16_t sw_datatable33;
uint16_t sw_datatable34;
};
struct atom_master_data_table_v2_1
{
struct atom_common_table_header table_header;
struct atom_master_list_of_data_tables_v2_1 listOfdatatables;
};
struct atom_dtd_format
{
uint16_t pixclk;
uint16_t h_active;
uint16_t h_blanking_time;
uint16_t v_active;
uint16_t v_blanking_time;
uint16_t h_sync_offset;
uint16_t h_sync_width;
uint16_t v_sync_offset;
uint16_t v_syncwidth;
uint16_t reserved;
uint16_t reserved0;
uint8_t h_border;
uint8_t v_border;
uint16_t miscinfo;
uint8_t atom_mode_id;
uint8_t refreshrate;
};
/* atom_dtd_format.modemiscinfo defintion */
enum atom_dtd_format_modemiscinfo{
ATOM_HSYNC_POLARITY = 0x0002,
ATOM_VSYNC_POLARITY = 0x0004,
ATOM_H_REPLICATIONBY2 = 0x0010,
ATOM_V_REPLICATIONBY2 = 0x0020,
ATOM_INTERLACE = 0x0080,
ATOM_COMPOSITESYNC = 0x0040,
};
/* utilitypipeline
* when format_revision==1 && content_revision==1, then this an info table for atomworks to use during debug session, no structure is associated with it.
* the location of it can't change
*/
/*
***************************************************************************
Data Table firmwareinfo structure
***************************************************************************
*/
struct atom_firmware_info_v3_1
{
struct atom_common_table_header table_header;
uint32_t firmware_revision;
uint32_t bootup_sclk_in10khz;
uint32_t bootup_mclk_in10khz;
uint32_t firmware_capability; // enum atombios_firmware_capability
uint32_t main_call_parser_entry; /* direct address of main parser call in VBIOS binary. */
uint32_t bios_scratch_reg_startaddr; // 1st bios scratch register dword address
uint16_t bootup_vddc_mv;
uint16_t bootup_vddci_mv;
uint16_t bootup_mvddc_mv;
uint16_t bootup_vddgfx_mv;
uint8_t mem_module_id;
uint8_t coolingsolution_id; /*0: Air cooling; 1: Liquid cooling ... */
uint8_t reserved1[2];
uint32_t mc_baseaddr_high;
uint32_t mc_baseaddr_low;
uint32_t reserved2[6];
};
/* Total 32bit cap indication */
enum atombios_firmware_capability
{
ATOM_FIRMWARE_CAP_FIRMWARE_POSTED = 0x00000001,
ATOM_FIRMWARE_CAP_GPU_VIRTUALIZATION = 0x00000002,
ATOM_FIRMWARE_CAP_WMI_SUPPORT = 0x00000040,
ATOM_FIRMWARE_CAP_HWEMU_ENABLE = 0x00000080,
ATOM_FIRMWARE_CAP_HWEMU_UMC_CFG = 0x00000100,
ATOM_FIRMWARE_CAP_SRAM_ECC = 0x00000200,
ATOM_FIRMWARE_CAP_ENABLE_2STAGE_BIST_TRAINING = 0x00000400,
ATOM_FIRMWARE_CAP_ENABLE_2ND_USB20PORT = 0x0008000,
ATOM_FIRMWARE_CAP_DYNAMIC_BOOT_CFG_ENABLE = 0x0020000,
};
enum atom_cooling_solution_id{
AIR_COOLING = 0x00,
LIQUID_COOLING = 0x01
};
struct atom_firmware_info_v3_2 {
struct atom_common_table_header table_header;
uint32_t firmware_revision;
uint32_t bootup_sclk_in10khz;
uint32_t bootup_mclk_in10khz;
uint32_t firmware_capability; // enum atombios_firmware_capability
uint32_t main_call_parser_entry; /* direct address of main parser call in VBIOS binary. */
uint32_t bios_scratch_reg_startaddr; // 1st bios scratch register dword address
uint16_t bootup_vddc_mv;
uint16_t bootup_vddci_mv;
uint16_t bootup_mvddc_mv;
uint16_t bootup_vddgfx_mv;
uint8_t mem_module_id;
uint8_t coolingsolution_id; /*0: Air cooling; 1: Liquid cooling ... */
uint8_t reserved1[2];
uint32_t mc_baseaddr_high;
uint32_t mc_baseaddr_low;
uint8_t board_i2c_feature_id; // enum of atom_board_i2c_feature_id_def
uint8_t board_i2c_feature_gpio_id; // i2c id find in gpio_lut data table gpio_id
uint8_t board_i2c_feature_slave_addr;
uint8_t reserved3;
uint16_t bootup_mvddq_mv;
uint16_t bootup_mvpp_mv;
uint32_t zfbstartaddrin16mb;
uint32_t reserved2[3];
};
struct atom_firmware_info_v3_3
{
struct atom_common_table_header table_header;
uint32_t firmware_revision;
uint32_t bootup_sclk_in10khz;
uint32_t bootup_mclk_in10khz;
uint32_t firmware_capability; // enum atombios_firmware_capability
uint32_t main_call_parser_entry; /* direct address of main parser call in VBIOS binary. */
uint32_t bios_scratch_reg_startaddr; // 1st bios scratch register dword address
uint16_t bootup_vddc_mv;
uint16_t bootup_vddci_mv;
uint16_t bootup_mvddc_mv;
uint16_t bootup_vddgfx_mv;
uint8_t mem_module_id;
uint8_t coolingsolution_id; /*0: Air cooling; 1: Liquid cooling ... */
uint8_t reserved1[2];
uint32_t mc_baseaddr_high;
uint32_t mc_baseaddr_low;
uint8_t board_i2c_feature_id; // enum of atom_board_i2c_feature_id_def
uint8_t board_i2c_feature_gpio_id; // i2c id find in gpio_lut data table gpio_id
uint8_t board_i2c_feature_slave_addr;
uint8_t reserved3;
uint16_t bootup_mvddq_mv;
uint16_t bootup_mvpp_mv;
uint32_t zfbstartaddrin16mb;
uint32_t pplib_pptable_id; // if pplib_pptable_id!=0, pplib get powerplay table inside driver instead of from VBIOS
uint32_t reserved2[2];
};
struct atom_firmware_info_v3_4 {
struct atom_common_table_header table_header;
uint32_t firmware_revision;
uint32_t bootup_sclk_in10khz;
uint32_t bootup_mclk_in10khz;
uint32_t firmware_capability; // enum atombios_firmware_capability
uint32_t main_call_parser_entry; /* direct address of main parser call in VBIOS binary. */
uint32_t bios_scratch_reg_startaddr; // 1st bios scratch register dword address
uint16_t bootup_vddc_mv;
uint16_t bootup_vddci_mv;
uint16_t bootup_mvddc_mv;
uint16_t bootup_vddgfx_mv;
uint8_t mem_module_id;
uint8_t coolingsolution_id; /*0: Air cooling; 1: Liquid cooling ... */
uint8_t reserved1[2];
uint32_t mc_baseaddr_high;
uint32_t mc_baseaddr_low;
uint8_t board_i2c_feature_id; // enum of atom_board_i2c_feature_id_def
uint8_t board_i2c_feature_gpio_id; // i2c id find in gpio_lut data table gpio_id
uint8_t board_i2c_feature_slave_addr;
uint8_t ras_rom_i2c_slave_addr;
uint16_t bootup_mvddq_mv;
uint16_t bootup_mvpp_mv;
uint32_t zfbstartaddrin16mb;
uint32_t pplib_pptable_id; // if pplib_pptable_id!=0, pplib get powerplay table inside driver instead of from VBIOS
uint32_t mvdd_ratio; // mvdd_raio = (real mvdd in power rail)*1000/(mvdd_output_from_svi2)
uint16_t hw_bootup_vddgfx_mv; // hw default vddgfx voltage level decide by board strap
uint16_t hw_bootup_vddc_mv; // hw default vddc voltage level decide by board strap
uint16_t hw_bootup_mvddc_mv; // hw default mvddc voltage level decide by board strap
uint16_t hw_bootup_vddci_mv; // hw default vddci voltage level decide by board strap
uint32_t maco_pwrlimit_mw; // bomaco mode power limit in unit of m-watt
uint32_t usb_pwrlimit_mw; // power limit when USB is enable in unit of m-watt
uint32_t fw_reserved_size_in_kb; // VBIOS reserved extra fw size in unit of kb.
uint32_t pspbl_init_done_reg_addr;
uint32_t pspbl_init_done_value;
uint32_t pspbl_init_done_check_timeout; // time out in unit of us when polling pspbl init done
uint32_t reserved[2];
};
/*
***************************************************************************
Data Table lcd_info structure
***************************************************************************
*/
struct lcd_info_v2_1
{
struct atom_common_table_header table_header;
struct atom_dtd_format lcd_timing;
uint16_t backlight_pwm;
uint16_t special_handle_cap;
uint16_t panel_misc;
uint16_t lvds_max_slink_pclk;
uint16_t lvds_ss_percentage;
uint16_t lvds_ss_rate_10hz;
uint8_t pwr_on_digon_to_de; /*all pwr sequence numbers below are in uint of 4ms*/
uint8_t pwr_on_de_to_vary_bl;
uint8_t pwr_down_vary_bloff_to_de;
uint8_t pwr_down_de_to_digoff;
uint8_t pwr_off_delay;
uint8_t pwr_on_vary_bl_to_blon;
uint8_t pwr_down_bloff_to_vary_bloff;
uint8_t panel_bpc;
uint8_t dpcd_edp_config_cap;
uint8_t dpcd_max_link_rate;
uint8_t dpcd_max_lane_count;
uint8_t dpcd_max_downspread;
uint8_t min_allowed_bl_level;
uint8_t max_allowed_bl_level;
uint8_t bootup_bl_level;
uint8_t dplvdsrxid;
uint32_t reserved1[8];
};
/* lcd_info_v2_1.panel_misc defintion */
enum atom_lcd_info_panel_misc{
ATOM_PANEL_MISC_FPDI =0x0002,
};
//uceDPToLVDSRxId
enum atom_lcd_info_dptolvds_rx_id
{
eDP_TO_LVDS_RX_DISABLE = 0x00, // no eDP->LVDS translator chip
eDP_TO_LVDS_COMMON_ID = 0x01, // common eDP->LVDS translator chip without AMD SW init
eDP_TO_LVDS_REALTEK_ID = 0x02, // Realtek tansaltor which require AMD SW init
};
/*
***************************************************************************
Data Table gpio_pin_lut structure
***************************************************************************
*/
struct atom_gpio_pin_assignment
{
uint32_t data_a_reg_index;
uint8_t gpio_bitshift;
uint8_t gpio_mask_bitshift;
uint8_t gpio_id;
uint8_t reserved;
};
/* atom_gpio_pin_assignment.gpio_id definition */
enum atom_gpio_pin_assignment_gpio_id {
I2C_HW_LANE_MUX =0x0f, /* only valid when bit7=1 */
I2C_HW_ENGINE_ID_MASK =0x70, /* only valid when bit7=1 */
I2C_HW_CAP =0x80, /*only when the I2C_HW_CAP is set, the pin ID is assigned to an I2C pin pair, otherwise, it's an generic GPIO pin */
/* gpio_id pre-define id for multiple usage */
/* GPIO use to control PCIE_VDDC in certain SLT board */
PCIE_VDDC_CONTROL_GPIO_PINID = 56,
/* if PP_AC_DC_SWITCH_GPIO_PINID in Gpio_Pin_LutTable, AC/DC swithing feature is enable */
PP_AC_DC_SWITCH_GPIO_PINID = 60,
/* VDDC_REGULATOR_VRHOT_GPIO_PINID in Gpio_Pin_LutTable, VRHot feature is enable */
VDDC_VRHOT_GPIO_PINID = 61,
/*if VDDC_PCC_GPIO_PINID in GPIO_LUTable, Peak Current Control feature is enabled */
VDDC_PCC_GPIO_PINID = 62,
/* Only used on certain SLT/PA board to allow utility to cut Efuse. */
EFUSE_CUT_ENABLE_GPIO_PINID = 63,
/* ucGPIO=DRAM_SELF_REFRESH_GPIO_PIND uses for memory self refresh (ucGPIO=0, DRAM self-refresh; ucGPIO= */
DRAM_SELF_REFRESH_GPIO_PINID = 64,
/* Thermal interrupt output->system thermal chip GPIO pin */
THERMAL_INT_OUTPUT_GPIO_PINID =65,
};
struct atom_gpio_pin_lut_v2_1
{
struct atom_common_table_header table_header;
/*the real number of this included in the structure is calcualted by using the (whole structure size - the header size)/size of atom_gpio_pin_lut */
struct atom_gpio_pin_assignment gpio_pin[8];
};
/*
***************************************************************************
Data Table vram_usagebyfirmware structure
***************************************************************************
*/
struct vram_usagebyfirmware_v2_1
{
struct atom_common_table_header table_header;
uint32_t start_address_in_kb;
uint16_t used_by_firmware_in_kb;
uint16_t used_by_driver_in_kb;
};
/*
***************************************************************************
Data Table displayobjectinfo structure
***************************************************************************
*/
enum atom_object_record_type_id
{
ATOM_I2C_RECORD_TYPE =1,
ATOM_HPD_INT_RECORD_TYPE =2,
ATOM_OBJECT_GPIO_CNTL_RECORD_TYPE =9,
ATOM_CONNECTOR_HPDPIN_LUT_RECORD_TYPE =16,
ATOM_CONNECTOR_AUXDDC_LUT_RECORD_TYPE =17,
ATOM_ENCODER_CAP_RECORD_TYPE=20,
ATOM_BRACKET_LAYOUT_RECORD_TYPE=21,
ATOM_CONNECTOR_FORCED_TMDS_CAP_RECORD_TYPE=22,
ATOM_DISP_CONNECTOR_CAPS_RECORD_TYPE=23,
ATOM_RECORD_END_TYPE =0xFF,
};
struct atom_common_record_header
{
uint8_t record_type; //An emun to indicate the record type
uint8_t record_size; //The size of the whole record in byte
};
struct atom_i2c_record
{
struct atom_common_record_header record_header; //record_type = ATOM_I2C_RECORD_TYPE
uint8_t i2c_id;
uint8_t i2c_slave_addr; //The slave address, it's 0 when the record is attached to connector for DDC
};
struct atom_hpd_int_record
{
struct atom_common_record_header record_header; //record_type = ATOM_HPD_INT_RECORD_TYPE
uint8_t pin_id; //Corresponding block in GPIO_PIN_INFO table gives the pin info
uint8_t plugin_pin_state;
};
// Bit maps for ATOM_ENCODER_CAP_RECORD.usEncoderCap
enum atom_encoder_caps_def
{
ATOM_ENCODER_CAP_RECORD_HBR2 =0x01, // DP1.2 HBR2 is supported by HW encoder, it is retired in NI. the real meaning from SI is MST_EN
ATOM_ENCODER_CAP_RECORD_MST_EN =0x01, // from SI, this bit means DP MST is enable or not.
ATOM_ENCODER_CAP_RECORD_HBR2_EN =0x02, // DP1.2 HBR2 setting is qualified and HBR2 can be enabled
ATOM_ENCODER_CAP_RECORD_HDMI6Gbps_EN =0x04, // HDMI2.0 6Gbps enable or not.
ATOM_ENCODER_CAP_RECORD_HBR3_EN =0x08, // DP1.3 HBR3 is supported by board.
ATOM_ENCODER_CAP_RECORD_USB_C_TYPE =0x100, // the DP connector is a USB-C type.
};
struct atom_encoder_caps_record
{
struct atom_common_record_header record_header; //record_type = ATOM_ENCODER_CAP_RECORD_TYPE
uint32_t encodercaps;
};
enum atom_connector_caps_def
{
ATOM_CONNECTOR_CAP_INTERNAL_DISPLAY = 0x01, //a cap bit to indicate that this non-embedded display connector is an internal display
ATOM_CONNECTOR_CAP_INTERNAL_DISPLAY_BL = 0x02, //a cap bit to indicate that this internal display requires BL control from GPU, refers to lcd_info for BL PWM freq
};
struct atom_disp_connector_caps_record
{
struct atom_common_record_header record_header;
uint32_t connectcaps;
};
//The following generic object gpio pin control record type will replace JTAG_RECORD/FPGA_CONTROL_RECORD/DVI_EXT_INPUT_RECORD above gradually
struct atom_gpio_pin_control_pair
{
uint8_t gpio_id; // GPIO_ID, find the corresponding ID in GPIO_LUT table
uint8_t gpio_pinstate; // Pin state showing how to set-up the pin
};
struct atom_object_gpio_cntl_record
{
struct atom_common_record_header record_header;
uint8_t flag; // Future expnadibility
uint8_t number_of_pins; // Number of GPIO pins used to control the object
struct atom_gpio_pin_control_pair gpio[1]; // the real gpio pin pair determined by number of pins ucNumberOfPins
};
//Definitions for GPIO pin state
enum atom_gpio_pin_control_pinstate_def
{
GPIO_PIN_TYPE_INPUT = 0x00,
GPIO_PIN_TYPE_OUTPUT = 0x10,
GPIO_PIN_TYPE_HW_CONTROL = 0x20,
//For GPIO_PIN_TYPE_OUTPUT the following is defined
GPIO_PIN_OUTPUT_STATE_MASK = 0x01,
GPIO_PIN_OUTPUT_STATE_SHIFT = 0,
GPIO_PIN_STATE_ACTIVE_LOW = 0x0,
GPIO_PIN_STATE_ACTIVE_HIGH = 0x1,
};
// Indexes to GPIO array in GLSync record
// GLSync record is for Frame Lock/Gen Lock feature.
enum atom_glsync_record_gpio_index_def
{
ATOM_GPIO_INDEX_GLSYNC_REFCLK = 0,
ATOM_GPIO_INDEX_GLSYNC_HSYNC = 1,
ATOM_GPIO_INDEX_GLSYNC_VSYNC = 2,
ATOM_GPIO_INDEX_GLSYNC_SWAP_REQ = 3,
ATOM_GPIO_INDEX_GLSYNC_SWAP_GNT = 4,
ATOM_GPIO_INDEX_GLSYNC_INTERRUPT = 5,
ATOM_GPIO_INDEX_GLSYNC_V_RESET = 6,
ATOM_GPIO_INDEX_GLSYNC_SWAP_CNTL = 7,
ATOM_GPIO_INDEX_GLSYNC_SWAP_SEL = 8,
ATOM_GPIO_INDEX_GLSYNC_MAX = 9,
};
struct atom_connector_hpdpin_lut_record //record for ATOM_CONNECTOR_HPDPIN_LUT_RECORD_TYPE
{
struct atom_common_record_header record_header;
uint8_t hpd_pin_map[8];
};
struct atom_connector_auxddc_lut_record //record for ATOM_CONNECTOR_AUXDDC_LUT_RECORD_TYPE
{
struct atom_common_record_header record_header;
uint8_t aux_ddc_map[8];
};
struct atom_connector_forced_tmds_cap_record
{
struct atom_common_record_header record_header;
// override TMDS capability on this connector when it operate in TMDS mode. usMaxTmdsClkRate = max TMDS Clock in Mhz/2.5
uint8_t maxtmdsclkrate_in2_5mhz;
uint8_t reserved;
};
struct atom_connector_layout_info
{
uint16_t connectorobjid;
uint8_t connector_type;
uint8_t position;
};
// define ATOM_CONNECTOR_LAYOUT_INFO.ucConnectorType to describe the display connector size
enum atom_connector_layout_info_connector_type_def
{
CONNECTOR_TYPE_DVI_D = 1,
CONNECTOR_TYPE_HDMI = 4,
CONNECTOR_TYPE_DISPLAY_PORT = 5,
CONNECTOR_TYPE_MINI_DISPLAY_PORT = 6,
};
struct atom_bracket_layout_record
{
struct atom_common_record_header record_header;
uint8_t bracketlen;
uint8_t bracketwidth;
uint8_t conn_num;
uint8_t reserved;
struct atom_connector_layout_info conn_info[1];
};
enum atom_display_device_tag_def{
ATOM_DISPLAY_LCD1_SUPPORT = 0x0002, //an embedded display is either an LVDS or eDP signal type of display
ATOM_DISPLAY_LCD2_SUPPORT = 0x0020, //second edp device tag 0x0020 for backward compability
ATOM_DISPLAY_DFP1_SUPPORT = 0x0008,
ATOM_DISPLAY_DFP2_SUPPORT = 0x0080,
ATOM_DISPLAY_DFP3_SUPPORT = 0x0200,
ATOM_DISPLAY_DFP4_SUPPORT = 0x0400,
ATOM_DISPLAY_DFP5_SUPPORT = 0x0800,
ATOM_DISPLAY_DFP6_SUPPORT = 0x0040,
ATOM_DISPLAY_DFPx_SUPPORT = 0x0ec8,
};
struct atom_display_object_path_v2
{
uint16_t display_objid; //Connector Object ID or Misc Object ID
uint16_t disp_recordoffset;
uint16_t encoderobjid; //first encoder closer to the connector, could be either an external or intenal encoder
uint16_t extencoderobjid; //2nd encoder after the first encoder, from the connector point of view;
uint16_t encoder_recordoffset;
uint16_t extencoder_recordoffset;
uint16_t device_tag; //a supported device vector, each display path starts with this.the paths are enumerated in the way of priority, a path appears first
uint8_t priority_id;
uint8_t reserved;
};
struct display_object_info_table_v1_4
{
struct atom_common_table_header table_header;
uint16_t supporteddevices;
uint8_t number_of_path;
uint8_t reserved;
struct atom_display_object_path_v2 display_path[8]; //the real number of this included in the structure is calculated by using the (whole structure size - the header size- number_of_path)/size of atom_display_object_path
};
/*
***************************************************************************
Data Table dce_info structure
***************************************************************************
*/
struct atom_display_controller_info_v4_1
{
struct atom_common_table_header table_header;
uint32_t display_caps;
uint32_t bootup_dispclk_10khz;
uint16_t dce_refclk_10khz;
uint16_t i2c_engine_refclk_10khz;
uint16_t dvi_ss_percentage; // in unit of 0.001%
uint16_t dvi_ss_rate_10hz;
uint16_t hdmi_ss_percentage; // in unit of 0.001%
uint16_t hdmi_ss_rate_10hz;
uint16_t dp_ss_percentage; // in unit of 0.001%
uint16_t dp_ss_rate_10hz;
uint8_t dvi_ss_mode; // enum of atom_spread_spectrum_mode
uint8_t hdmi_ss_mode; // enum of atom_spread_spectrum_mode
uint8_t dp_ss_mode; // enum of atom_spread_spectrum_mode
uint8_t ss_reserved;
uint8_t hardcode_mode_num; // a hardcode mode number defined in StandardVESA_TimingTable when a CRT or DFP EDID is not available
uint8_t reserved1[3];
uint16_t dpphy_refclk_10khz;
uint16_t reserved2;
uint8_t dceip_min_ver;
uint8_t dceip_max_ver;
uint8_t max_disp_pipe_num;
uint8_t max_vbios_active_disp_pipe_num;
uint8_t max_ppll_num;
uint8_t max_disp_phy_num;
uint8_t max_aux_pairs;
uint8_t remotedisplayconfig;
uint8_t reserved3[8];
};
struct atom_display_controller_info_v4_2
{
struct atom_common_table_header table_header;
uint32_t display_caps;
uint32_t bootup_dispclk_10khz;
uint16_t dce_refclk_10khz;
uint16_t i2c_engine_refclk_10khz;
uint16_t dvi_ss_percentage; // in unit of 0.001%
uint16_t dvi_ss_rate_10hz;
uint16_t hdmi_ss_percentage; // in unit of 0.001%
uint16_t hdmi_ss_rate_10hz;
uint16_t dp_ss_percentage; // in unit of 0.001%
uint16_t dp_ss_rate_10hz;
uint8_t dvi_ss_mode; // enum of atom_spread_spectrum_mode
uint8_t hdmi_ss_mode; // enum of atom_spread_spectrum_mode
uint8_t dp_ss_mode; // enum of atom_spread_spectrum_mode
uint8_t ss_reserved;
uint8_t dfp_hardcode_mode_num; // DFP hardcode mode number defined in StandardVESA_TimingTable when EDID is not available
uint8_t dfp_hardcode_refreshrate;// DFP hardcode mode refreshrate defined in StandardVESA_TimingTable when EDID is not available
uint8_t vga_hardcode_mode_num; // VGA hardcode mode number defined in StandardVESA_TimingTable when EDID is not avablable
uint8_t vga_hardcode_refreshrate;// VGA hardcode mode number defined in StandardVESA_TimingTable when EDID is not avablable
uint16_t dpphy_refclk_10khz;
uint16_t reserved2;
uint8_t dcnip_min_ver;
uint8_t dcnip_max_ver;
uint8_t max_disp_pipe_num;
uint8_t max_vbios_active_disp_pipe_num;
uint8_t max_ppll_num;
uint8_t max_disp_phy_num;
uint8_t max_aux_pairs;
uint8_t remotedisplayconfig;
uint8_t reserved3[8];
};
struct atom_display_controller_info_v4_3
{
struct atom_common_table_header table_header;
uint32_t display_caps;
uint32_t bootup_dispclk_10khz;
uint16_t dce_refclk_10khz;
uint16_t i2c_engine_refclk_10khz;
uint16_t dvi_ss_percentage; // in unit of 0.001%
uint16_t dvi_ss_rate_10hz;
uint16_t hdmi_ss_percentage; // in unit of 0.001%
uint16_t hdmi_ss_rate_10hz;
uint16_t dp_ss_percentage; // in unit of 0.001%
uint16_t dp_ss_rate_10hz;
uint8_t dvi_ss_mode; // enum of atom_spread_spectrum_mode
uint8_t hdmi_ss_mode; // enum of atom_spread_spectrum_mode
uint8_t dp_ss_mode; // enum of atom_spread_spectrum_mode
uint8_t ss_reserved;
uint8_t dfp_hardcode_mode_num; // DFP hardcode mode number defined in StandardVESA_TimingTable when EDID is not available
uint8_t dfp_hardcode_refreshrate;// DFP hardcode mode refreshrate defined in StandardVESA_TimingTable when EDID is not available
uint8_t vga_hardcode_mode_num; // VGA hardcode mode number defined in StandardVESA_TimingTable when EDID is not avablable
uint8_t vga_hardcode_refreshrate;// VGA hardcode mode number defined in StandardVESA_TimingTable when EDID is not avablable
uint16_t dpphy_refclk_10khz;
uint16_t reserved2;
uint8_t dcnip_min_ver;
uint8_t dcnip_max_ver;
uint8_t max_disp_pipe_num;
uint8_t max_vbios_active_disp_pipe_num;
uint8_t max_ppll_num;
uint8_t max_disp_phy_num;
uint8_t max_aux_pairs;
uint8_t remotedisplayconfig;
uint8_t reserved3[8];
};
struct atom_display_controller_info_v4_4 {
struct atom_common_table_header table_header;
uint32_t display_caps;
uint32_t bootup_dispclk_10khz;
uint16_t dce_refclk_10khz;
uint16_t i2c_engine_refclk_10khz;
uint16_t dvi_ss_percentage; // in unit of 0.001%
uint16_t dvi_ss_rate_10hz;
uint16_t hdmi_ss_percentage; // in unit of 0.001%
uint16_t hdmi_ss_rate_10hz;
uint16_t dp_ss_percentage; // in unit of 0.001%
uint16_t dp_ss_rate_10hz;
uint8_t dvi_ss_mode; // enum of atom_spread_spectrum_mode
uint8_t hdmi_ss_mode; // enum of atom_spread_spectrum_mode
uint8_t dp_ss_mode; // enum of atom_spread_spectrum_mode
uint8_t ss_reserved;
uint8_t dfp_hardcode_mode_num; // DFP hardcode mode number defined in StandardVESA_TimingTable when EDID is not available
uint8_t dfp_hardcode_refreshrate;// DFP hardcode mode refreshrate defined in StandardVESA_TimingTable when EDID is not available
uint8_t vga_hardcode_mode_num; // VGA hardcode mode number defined in StandardVESA_TimingTable when EDID is not avablable
uint8_t vga_hardcode_refreshrate;// VGA hardcode mode number defined in StandardVESA_TimingTable when EDID is not avablable
uint16_t dpphy_refclk_10khz;
uint16_t hw_chip_id;
uint8_t dcnip_min_ver;
uint8_t dcnip_max_ver;
uint8_t max_disp_pipe_num;
uint8_t max_vbios_active_disp_pipum;
uint8_t max_ppll_num;
uint8_t max_disp_phy_num;
uint8_t max_aux_pairs;
uint8_t remotedisplayconfig;
uint32_t dispclk_pll_vco_freq;
uint32_t dp_ref_clk_freq;
uint32_t max_mclk_chg_lat; // Worst case blackout duration for a memory clock frequency (p-state) change, units of 100s of ns (0.1 us)
uint32_t max_sr_exit_lat; // Worst case memory self refresh exit time, units of 100ns of ns (0.1us)
uint32_t max_sr_enter_exit_lat; // Worst case memory self refresh entry followed by immediate exit time, units of 100ns of ns (0.1us)
uint16_t dc_golden_table_offset; // point of struct of atom_dc_golden_table_vxx
uint16_t dc_golden_table_ver;
uint32_t reserved3[3];
};
struct atom_dc_golden_table_v1
{
uint32_t aux_dphy_rx_control0_val;
uint32_t aux_dphy_tx_control_val;
uint32_t aux_dphy_rx_control1_val;
uint32_t dc_gpio_aux_ctrl_0_val;
uint32_t dc_gpio_aux_ctrl_1_val;
uint32_t dc_gpio_aux_ctrl_2_val;
uint32_t dc_gpio_aux_ctrl_3_val;
uint32_t dc_gpio_aux_ctrl_4_val;
uint32_t dc_gpio_aux_ctrl_5_val;
uint32_t reserved[23];
};
enum dce_info_caps_def
{
// only for VBIOS
DCE_INFO_CAPS_FORCE_DISPDEV_CONNECTED =0x02,
// only for VBIOS
DCE_INFO_CAPS_DISABLE_DFP_DP_HBR2 =0x04,
// only for VBIOS
DCE_INFO_CAPS_ENABLE_INTERLAC_TIMING =0x08,
// only for VBIOS
DCE_INFO_CAPS_LTTPR_SUPPORT_ENABLE =0x20,
DCE_INFO_CAPS_VBIOS_LTTPR_TRANSPARENT_ENABLE = 0x40,
};
/*
***************************************************************************
Data Table ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO structure
***************************************************************************
*/
struct atom_ext_display_path
{
uint16_t device_tag; //A bit vector to show what devices are supported
uint16_t device_acpi_enum; //16bit device ACPI id.
uint16_t connectorobjid; //A physical connector for displays to plug in, using object connector definitions
uint8_t auxddclut_index; //An index into external AUX/DDC channel LUT
uint8_t hpdlut_index; //An index into external HPD pin LUT
uint16_t ext_encoder_objid; //external encoder object id
uint8_t channelmapping; // if ucChannelMapping=0, using default one to one mapping
uint8_t chpninvert; // bit vector for up to 8 lanes, =0: P and N is not invert, =1 P and N is inverted
uint16_t caps;
uint16_t reserved;
};
//usCaps
enum ext_display_path_cap_def {
EXT_DISPLAY_PATH_CAPS__HBR2_DISABLE = 0x0001,
EXT_DISPLAY_PATH_CAPS__DP_FIXED_VS_EN = 0x0002,
EXT_DISPLAY_PATH_CAPS__EXT_CHIP_MASK = 0x007C,
EXT_DISPLAY_PATH_CAPS__HDMI20_PI3EQX1204 = (0x01 << 2), //PI redriver chip
EXT_DISPLAY_PATH_CAPS__HDMI20_TISN65DP159RSBT = (0x02 << 2), //TI retimer chip
EXT_DISPLAY_PATH_CAPS__HDMI20_PARADE_PS175 = (0x03 << 2) //Parade DP->HDMI recoverter chip
};
struct atom_external_display_connection_info
{
struct atom_common_table_header table_header;
uint8_t guid[16]; // a GUID is a 16 byte long string
struct atom_ext_display_path path[7]; // total of fixed 7 entries.
uint8_t checksum; // a simple Checksum of the sum of whole structure equal to 0x0.
uint8_t stereopinid; // use for eDP panel
uint8_t remotedisplayconfig;
uint8_t edptolvdsrxid;
uint8_t fixdpvoltageswing; // usCaps[1]=1, this indicate DP_LANE_SET value
uint8_t reserved[3]; // for potential expansion
};
/*
***************************************************************************
Data Table integratedsysteminfo structure
***************************************************************************
*/
struct atom_camera_dphy_timing_param
{
uint8_t profile_id; // SENSOR_PROFILES
uint32_t param;
};
struct atom_camera_dphy_elec_param
{
uint16_t param[3];
};
struct atom_camera_module_info
{
uint8_t module_id; // 0: Rear, 1: Front right of user, 2: Front left of user
uint8_t module_name[8];
struct atom_camera_dphy_timing_param timingparam[6]; // Exact number is under estimation and confirmation from sensor vendor
};
struct atom_camera_flashlight_info
{
uint8_t flashlight_id; // 0: Rear, 1: Front
uint8_t name[8];
};
struct atom_camera_data
{
uint32_t versionCode;
struct atom_camera_module_info cameraInfo[3]; // Assuming 3 camera sensors max
struct atom_camera_flashlight_info flashInfo; // Assuming 1 flashlight max
struct atom_camera_dphy_elec_param dphy_param;
uint32_t crc_val; // CRC
};
struct atom_14nm_dpphy_dvihdmi_tuningset
{
uint32_t max_symclk_in10khz;
uint8_t encoder_mode; //atom_encode_mode_def, =2: DVI, =3: HDMI mode
uint8_t phy_sel; //bit vector of phy, bit0= phya, bit1=phyb, ....bit5 = phyf
uint16_t margindeemph; //COMMON_MAR_DEEMPH_NOM[7:0]tx_margin_nom [15:8]deemph_gen1_nom
uint8_t deemph_6db_4; //COMMON_SELDEEMPH60[31:24]deemph_6db_4
uint8_t boostadj; //CMD_BUS_GLOBAL_FOR_TX_LANE0 [19:16]tx_boost_adj [20]tx_boost_en [23:22]tx_binary_ron_code_offset
uint8_t tx_driver_fifty_ohms; //COMMON_ZCALCODE_CTRL[21].tx_driver_fifty_ohms
uint8_t deemph_sel; //MARGIN_DEEMPH_LANE0.DEEMPH_SEL
};
struct atom_14nm_dpphy_dp_setting{
uint8_t dp_vs_pemph_level; //enum of atom_dp_vs_preemph_def
uint16_t margindeemph; //COMMON_MAR_DEEMPH_NOM[7:0]tx_margin_nom [15:8]deemph_gen1_nom
uint8_t deemph_6db_4; //COMMON_SELDEEMPH60[31:24]deemph_6db_4
uint8_t boostadj; //CMD_BUS_GLOBAL_FOR_TX_LANE0 [19:16]tx_boost_adj [20]tx_boost_en [23:22]tx_binary_ron_code_offset
};
struct atom_14nm_dpphy_dp_tuningset{
uint8_t phy_sel; // bit vector of phy, bit0= phya, bit1=phyb, ....bit5 = phyf
uint8_t version;
uint16_t table_size; // size of atom_14nm_dpphy_dp_tuningset
uint16_t reserved;
struct atom_14nm_dpphy_dp_setting dptuning[10];
};
struct atom_14nm_dig_transmitter_info_header_v4_0{
struct atom_common_table_header table_header;
uint16_t pcie_phy_tmds_hdmi_macro_settings_offset; // offset of PCIEPhyTMDSHDMIMacroSettingsTbl
uint16_t uniphy_vs_emph_lookup_table_offset; // offset of UniphyVSEmphLookUpTbl
uint16_t uniphy_xbar_settings_table_offset; // offset of UniphyXbarSettingsTbl
};
struct atom_14nm_combphy_tmds_vs_set
{
uint8_t sym_clk;
uint8_t dig_mode;
uint8_t phy_sel;
uint16_t common_mar_deemph_nom__margin_deemph_val;
uint8_t common_seldeemph60__deemph_6db_4_val;
uint8_t cmd_bus_global_for_tx_lane0__boostadj_val ;
uint8_t common_zcalcode_ctrl__tx_driver_fifty_ohms_val;
uint8_t margin_deemph_lane0__deemph_sel_val;
};
struct atom_DCN_dpphy_dvihdmi_tuningset
{
uint32_t max_symclk_in10khz;
uint8_t encoder_mode; //atom_encode_mode_def, =2: DVI, =3: HDMI mode
uint8_t phy_sel; //bit vector of phy, bit0= phya, bit1=phyb, ....bit5 = phyf
uint8_t tx_eq_main; // map to RDPCSTX_PHY_FUSE0/1/2/3[5:0](EQ_MAIN)
uint8_t tx_eq_pre; // map to RDPCSTX_PHY_FUSE0/1/2/3[11:6](EQ_PRE)
uint8_t tx_eq_post; // map to RDPCSTX_PHY_FUSE0/1/2/3[17:12](EQ_POST)
uint8_t reserved1;
uint8_t tx_vboost_lvl; // tx_vboost_lvl, map to RDPCSTX_PHY_CNTL0.RDPCS_PHY_TX_VBOOST_LVL
uint8_t reserved2;
};
struct atom_DCN_dpphy_dp_setting{
uint8_t dp_vs_pemph_level; //enum of atom_dp_vs_preemph_def
uint8_t tx_eq_main; // map to RDPCSTX_PHY_FUSE0/1/2/3[5:0](EQ_MAIN)
uint8_t tx_eq_pre; // map to RDPCSTX_PHY_FUSE0/1/2/3[11:6](EQ_PRE)
uint8_t tx_eq_post; // map to RDPCSTX_PHY_FUSE0/1/2/3[17:12](EQ_POST)
uint8_t tx_vboost_lvl; // tx_vboost_lvl, map to RDPCSTX_PHY_CNTL0.RDPCS_PHY_TX_VBOOST_LVL
};
struct atom_DCN_dpphy_dp_tuningset{
uint8_t phy_sel; // bit vector of phy, bit0= phya, bit1=phyb, ....bit5 = phyf
uint8_t version;
uint16_t table_size; // size of atom_14nm_dpphy_dp_setting
uint16_t reserved;
struct atom_DCN_dpphy_dp_setting dptunings[10];
};
struct atom_i2c_reg_info {
uint8_t ucI2cRegIndex;
uint8_t ucI2cRegVal;
};
struct atom_hdmi_retimer_redriver_set {
uint8_t HdmiSlvAddr;
uint8_t HdmiRegNum;
uint8_t Hdmi6GRegNum;
struct atom_i2c_reg_info HdmiRegSetting[9]; //For non 6G Hz use
struct atom_i2c_reg_info Hdmi6GhzRegSetting[3]; //For 6G Hz use.
};
struct atom_integrated_system_info_v1_11
{
struct atom_common_table_header table_header;
uint32_t vbios_misc; //enum of atom_system_vbiosmisc_def
uint32_t gpucapinfo; //enum of atom_system_gpucapinf_def
uint32_t system_config;
uint32_t cpucapinfo;
uint16_t gpuclk_ss_percentage; //unit of 0.001%, 1000 mean 1%
uint16_t gpuclk_ss_type;
uint16_t lvds_ss_percentage; //unit of 0.001%, 1000 mean 1%
uint16_t lvds_ss_rate_10hz;
uint16_t hdmi_ss_percentage; //unit of 0.001%, 1000 mean 1%
uint16_t hdmi_ss_rate_10hz;
uint16_t dvi_ss_percentage; //unit of 0.001%, 1000 mean 1%
uint16_t dvi_ss_rate_10hz;
uint16_t dpphy_override; // bit vector, enum of atom_sysinfo_dpphy_override_def
uint16_t lvds_misc; // enum of atom_sys_info_lvds_misc_def
uint16_t backlight_pwm_hz; // pwm frequency in hz
uint8_t memorytype; // enum of atom_dmi_t17_mem_type_def, APU memory type indication.
uint8_t umachannelnumber; // number of memory channels
uint8_t pwr_on_digon_to_de; /* all pwr sequence numbers below are in uint of 4ms */
uint8_t pwr_on_de_to_vary_bl;
uint8_t pwr_down_vary_bloff_to_de;
uint8_t pwr_down_de_to_digoff;
uint8_t pwr_off_delay;
uint8_t pwr_on_vary_bl_to_blon;
uint8_t pwr_down_bloff_to_vary_bloff;
uint8_t min_allowed_bl_level;
uint8_t htc_hyst_limit;
uint8_t htc_tmp_limit;
uint8_t reserved1;
uint8_t reserved2;
struct atom_external_display_connection_info extdispconninfo;
struct atom_14nm_dpphy_dvihdmi_tuningset dvi_tuningset;
struct atom_14nm_dpphy_dvihdmi_tuningset hdmi_tuningset;
struct atom_14nm_dpphy_dvihdmi_tuningset hdmi6g_tuningset;
struct atom_14nm_dpphy_dp_tuningset dp_tuningset; // rbr 1.62G dp tuning set
struct atom_14nm_dpphy_dp_tuningset dp_hbr3_tuningset; // HBR3 dp tuning set
struct atom_camera_data camera_info;
struct atom_hdmi_retimer_redriver_set dp0_retimer_set; //for DP0
struct atom_hdmi_retimer_redriver_set dp1_retimer_set; //for DP1
struct atom_hdmi_retimer_redriver_set dp2_retimer_set; //for DP2
struct atom_hdmi_retimer_redriver_set dp3_retimer_set; //for DP3
struct atom_14nm_dpphy_dp_tuningset dp_hbr_tuningset; //hbr 2.7G dp tuning set
struct atom_14nm_dpphy_dp_tuningset dp_hbr2_tuningset; //hbr2 5.4G dp turnig set
struct atom_14nm_dpphy_dp_tuningset edp_tuningset; //edp tuning set
uint32_t reserved[66];
};
struct atom_integrated_system_info_v1_12
{
struct atom_common_table_header table_header;
uint32_t vbios_misc; //enum of atom_system_vbiosmisc_def
uint32_t gpucapinfo; //enum of atom_system_gpucapinf_def
uint32_t system_config;
uint32_t cpucapinfo;
uint16_t gpuclk_ss_percentage; //unit of 0.001%, 1000 mean 1%
uint16_t gpuclk_ss_type;
uint16_t lvds_ss_percentage; //unit of 0.001%, 1000 mean 1%
uint16_t lvds_ss_rate_10hz;
uint16_t hdmi_ss_percentage; //unit of 0.001%, 1000 mean 1%
uint16_t hdmi_ss_rate_10hz;
uint16_t dvi_ss_percentage; //unit of 0.001%, 1000 mean 1%
uint16_t dvi_ss_rate_10hz;
uint16_t dpphy_override; // bit vector, enum of atom_sysinfo_dpphy_override_def
uint16_t lvds_misc; // enum of atom_sys_info_lvds_misc_def
uint16_t backlight_pwm_hz; // pwm frequency in hz
uint8_t memorytype; // enum of atom_dmi_t17_mem_type_def, APU memory type indication.
uint8_t umachannelnumber; // number of memory channels
uint8_t pwr_on_digon_to_de; // all pwr sequence numbers below are in uint of 4ms //
uint8_t pwr_on_de_to_vary_bl;
uint8_t pwr_down_vary_bloff_to_de;
uint8_t pwr_down_de_to_digoff;
uint8_t pwr_off_delay;
uint8_t pwr_on_vary_bl_to_blon;
uint8_t pwr_down_bloff_to_vary_bloff;
uint8_t min_allowed_bl_level;
uint8_t htc_hyst_limit;
uint8_t htc_tmp_limit;
uint8_t reserved1;
uint8_t reserved2;
struct atom_external_display_connection_info extdispconninfo;
struct atom_DCN_dpphy_dvihdmi_tuningset TMDS_tuningset;
struct atom_DCN_dpphy_dvihdmi_tuningset hdmiCLK5_tuningset;
struct atom_DCN_dpphy_dvihdmi_tuningset hdmiCLK8_tuningset;
struct atom_DCN_dpphy_dp_tuningset rbr_tuningset; // rbr 1.62G dp tuning set
struct atom_DCN_dpphy_dp_tuningset hbr3_tuningset; // HBR3 dp tuning set
struct atom_camera_data camera_info;
struct atom_hdmi_retimer_redriver_set dp0_retimer_set; //for DP0
struct atom_hdmi_retimer_redriver_set dp1_retimer_set; //for DP1
struct atom_hdmi_retimer_redriver_set dp2_retimer_set; //for DP2
struct atom_hdmi_retimer_redriver_set dp3_retimer_set; //for DP3
struct atom_DCN_dpphy_dp_tuningset hbr_tuningset; //hbr 2.7G dp tuning set
struct atom_DCN_dpphy_dp_tuningset hbr2_tuningset; //hbr2 5.4G dp turnig set
struct atom_DCN_dpphy_dp_tuningset edp_tunings; //edp tuning set
struct atom_DCN_dpphy_dvihdmi_tuningset hdmiCLK6_tuningset;
uint32_t reserved[63];
};
struct edp_info_table
{
uint16_t edp_backlight_pwm_hz;
uint16_t edp_ss_percentage;
uint16_t edp_ss_rate_10hz;
uint16_t reserved1;
uint32_t reserved2;
uint8_t edp_pwr_on_off_delay;
uint8_t edp_pwr_on_vary_bl_to_blon;
uint8_t edp_pwr_down_bloff_to_vary_bloff;
uint8_t edp_panel_bpc;
uint8_t edp_bootup_bl_level;
uint8_t reserved3[3];
uint32_t reserved4[3];
};
struct atom_integrated_system_info_v2_1
{
struct atom_common_table_header table_header;
uint32_t vbios_misc; //enum of atom_system_vbiosmisc_def
uint32_t gpucapinfo; //enum of atom_system_gpucapinf_def
uint32_t system_config;
uint32_t cpucapinfo;
uint16_t gpuclk_ss_percentage; //unit of 0.001%, 1000 mean 1%
uint16_t gpuclk_ss_type;
uint16_t dpphy_override; // bit vector, enum of atom_sysinfo_dpphy_override_def
uint8_t memorytype; // enum of atom_dmi_t17_mem_type_def, APU memory type indication.
uint8_t umachannelnumber; // number of memory channels
uint8_t htc_hyst_limit;
uint8_t htc_tmp_limit;
uint8_t reserved1;
uint8_t reserved2;
struct edp_info_table edp1_info;
struct edp_info_table edp2_info;
uint32_t reserved3[8];
struct atom_external_display_connection_info extdispconninfo;
struct atom_DCN_dpphy_dvihdmi_tuningset TMDS_tuningset;
struct atom_DCN_dpphy_dvihdmi_tuningset hdmiCLK5_tuningset; //add clk6
struct atom_DCN_dpphy_dvihdmi_tuningset hdmiCLK6_tuningset;
struct atom_DCN_dpphy_dvihdmi_tuningset hdmiCLK8_tuningset;
uint32_t reserved4[6];//reserve 2*sizeof(atom_DCN_dpphy_dvihdmi_tuningset)
struct atom_DCN_dpphy_dp_tuningset rbr_tuningset; // rbr 1.62G dp tuning set
struct atom_DCN_dpphy_dp_tuningset hbr_tuningset; //hbr 2.7G dp tuning set
struct atom_DCN_dpphy_dp_tuningset hbr2_tuningset; //hbr2 5.4G dp turnig set
struct atom_DCN_dpphy_dp_tuningset hbr3_tuningset; // HBR3 dp tuning set
struct atom_DCN_dpphy_dp_tuningset edp_tunings; //edp tuning set
uint32_t reserved5[28];//reserve 2*sizeof(atom_DCN_dpphy_dp_tuningset)
struct atom_hdmi_retimer_redriver_set dp0_retimer_set; //for DP0
struct atom_hdmi_retimer_redriver_set dp1_retimer_set; //for DP1
struct atom_hdmi_retimer_redriver_set dp2_retimer_set; //for DP2
struct atom_hdmi_retimer_redriver_set dp3_retimer_set; //for DP3
uint32_t reserved6[30];// reserve size of(atom_camera_data) for camera_info
uint32_t reserved7[32];
};
struct atom_n6_display_phy_tuning_set {
uint8_t display_signal_type;
uint8_t phy_sel;
uint8_t preset_level;
uint8_t reserved1;
uint32_t reserved2;
uint32_t speed_upto;
uint8_t tx_vboost_level;
uint8_t tx_vreg_v2i;
uint8_t tx_vregdrv_byp;
uint8_t tx_term_cntl;
uint8_t tx_peak_level;
uint8_t tx_slew_en;
uint8_t tx_eq_pre;
uint8_t tx_eq_main;
uint8_t tx_eq_post;
uint8_t tx_en_inv_pre;
uint8_t tx_en_inv_post;
uint8_t reserved3;
uint32_t reserved4;
uint32_t reserved5;
uint32_t reserved6;
};
struct atom_display_phy_tuning_info {
struct atom_common_table_header table_header;
struct atom_n6_display_phy_tuning_set disp_phy_tuning[1];
};
struct atom_integrated_system_info_v2_2
{
struct atom_common_table_header table_header;
uint32_t vbios_misc; //enum of atom_system_vbiosmisc_def
uint32_t gpucapinfo; //enum of atom_system_gpucapinf_def
uint32_t system_config;
uint32_t cpucapinfo;
uint16_t gpuclk_ss_percentage; //unit of 0.001%, 1000 mean 1%
uint16_t gpuclk_ss_type;
uint16_t dpphy_override; // bit vector, enum of atom_sysinfo_dpphy_override_def
uint8_t memorytype; // enum of atom_dmi_t17_mem_type_def, APU memory type indication.
uint8_t umachannelnumber; // number of memory channels
uint8_t htc_hyst_limit;
uint8_t htc_tmp_limit;
uint8_t reserved1;
uint8_t reserved2;
struct edp_info_table edp1_info;
struct edp_info_table edp2_info;
uint32_t reserved3[8];
struct atom_external_display_connection_info extdispconninfo;
uint32_t reserved4[189];
};
// system_config
enum atom_system_vbiosmisc_def{
INTEGRATED_SYSTEM_INFO__GET_EDID_CALLBACK_FUNC_SUPPORT = 0x01,
};
// gpucapinfo
enum atom_system_gpucapinf_def{
SYS_INFO_GPUCAPS__ENABEL_DFS_BYPASS = 0x10,
};
//dpphy_override
enum atom_sysinfo_dpphy_override_def{
ATOM_ENABLE_DVI_TUNINGSET = 0x01,
ATOM_ENABLE_HDMI_TUNINGSET = 0x02,
ATOM_ENABLE_HDMI6G_TUNINGSET = 0x04,
ATOM_ENABLE_DP_TUNINGSET = 0x08,
ATOM_ENABLE_DP_HBR3_TUNINGSET = 0x10,
};
//lvds_misc
enum atom_sys_info_lvds_misc_def
{
SYS_INFO_LVDS_MISC_888_FPDI_MODE =0x01,
SYS_INFO_LVDS_MISC_888_BPC_MODE =0x04,
SYS_INFO_LVDS_MISC_OVERRIDE_EN =0x08,
};
//memorytype DMI Type 17 offset 12h - Memory Type
enum atom_dmi_t17_mem_type_def{
OtherMemType = 0x01, ///< Assign 01 to Other
UnknownMemType, ///< Assign 02 to Unknown
DramMemType, ///< Assign 03 to DRAM
EdramMemType, ///< Assign 04 to EDRAM
VramMemType, ///< Assign 05 to VRAM
SramMemType, ///< Assign 06 to SRAM
RamMemType, ///< Assign 07 to RAM
RomMemType, ///< Assign 08 to ROM
FlashMemType, ///< Assign 09 to Flash
EepromMemType, ///< Assign 10 to EEPROM
FepromMemType, ///< Assign 11 to FEPROM
EpromMemType, ///< Assign 12 to EPROM
CdramMemType, ///< Assign 13 to CDRAM
ThreeDramMemType, ///< Assign 14 to 3DRAM
SdramMemType, ///< Assign 15 to SDRAM
SgramMemType, ///< Assign 16 to SGRAM
RdramMemType, ///< Assign 17 to RDRAM
DdrMemType, ///< Assign 18 to DDR
Ddr2MemType, ///< Assign 19 to DDR2
Ddr2FbdimmMemType, ///< Assign 20 to DDR2 FB-DIMM
Ddr3MemType = 0x18, ///< Assign 24 to DDR3
Fbd2MemType, ///< Assign 25 to FBD2
Ddr4MemType, ///< Assign 26 to DDR4
LpDdrMemType, ///< Assign 27 to LPDDR
LpDdr2MemType, ///< Assign 28 to LPDDR2
LpDdr3MemType, ///< Assign 29 to LPDDR3
LpDdr4MemType, ///< Assign 30 to LPDDR4
GDdr6MemType, ///< Assign 31 to GDDR6
HbmMemType, ///< Assign 32 to HBM
Hbm2MemType, ///< Assign 33 to HBM2
Ddr5MemType, ///< Assign 34 to DDR5
LpDdr5MemType, ///< Assign 35 to LPDDR5
};
// this Table is used starting from NL/AM, used by SBIOS and pass the IntegratedSystemInfoTable/PowerPlayInfoTable/SystemCameraInfoTable
struct atom_fusion_system_info_v4
{
struct atom_integrated_system_info_v1_11 sysinfo; // refer to ATOM_INTEGRATED_SYSTEM_INFO_V1_8 definition
uint32_t powerplayinfo[256]; // Reserve 1024 bytes space for PowerPlayInfoTable
};
/*
***************************************************************************
Data Table gfx_info structure
***************************************************************************
*/
struct atom_gfx_info_v2_2
{
struct atom_common_table_header table_header;
uint8_t gfxip_min_ver;
uint8_t gfxip_max_ver;
uint8_t max_shader_engines;
uint8_t max_tile_pipes;
uint8_t max_cu_per_sh;
uint8_t max_sh_per_se;
uint8_t max_backends_per_se;
uint8_t max_texture_channel_caches;
uint32_t regaddr_cp_dma_src_addr;
uint32_t regaddr_cp_dma_src_addr_hi;
uint32_t regaddr_cp_dma_dst_addr;
uint32_t regaddr_cp_dma_dst_addr_hi;
uint32_t regaddr_cp_dma_command;
uint32_t regaddr_cp_status;
uint32_t regaddr_rlc_gpu_clock_32;
uint32_t rlc_gpu_timer_refclk;
};
struct atom_gfx_info_v2_3 {
struct atom_common_table_header table_header;
uint8_t gfxip_min_ver;
uint8_t gfxip_max_ver;
uint8_t max_shader_engines;
uint8_t max_tile_pipes;
uint8_t max_cu_per_sh;
uint8_t max_sh_per_se;
uint8_t max_backends_per_se;
uint8_t max_texture_channel_caches;
uint32_t regaddr_cp_dma_src_addr;
uint32_t regaddr_cp_dma_src_addr_hi;
uint32_t regaddr_cp_dma_dst_addr;
uint32_t regaddr_cp_dma_dst_addr_hi;
uint32_t regaddr_cp_dma_command;
uint32_t regaddr_cp_status;
uint32_t regaddr_rlc_gpu_clock_32;
uint32_t rlc_gpu_timer_refclk;
uint8_t active_cu_per_sh;
uint8_t active_rb_per_se;
uint16_t gcgoldenoffset;
uint32_t rm21_sram_vmin_value;
};
struct atom_gfx_info_v2_4
{
struct atom_common_table_header table_header;
uint8_t gfxip_min_ver;
uint8_t gfxip_max_ver;
uint8_t max_shader_engines;
uint8_t reserved;
uint8_t max_cu_per_sh;
uint8_t max_sh_per_se;
uint8_t max_backends_per_se;
uint8_t max_texture_channel_caches;
uint32_t regaddr_cp_dma_src_addr;
uint32_t regaddr_cp_dma_src_addr_hi;
uint32_t regaddr_cp_dma_dst_addr;
uint32_t regaddr_cp_dma_dst_addr_hi;
uint32_t regaddr_cp_dma_command;
uint32_t regaddr_cp_status;
uint32_t regaddr_rlc_gpu_clock_32;
uint32_t rlc_gpu_timer_refclk;
uint8_t active_cu_per_sh;
uint8_t active_rb_per_se;
uint16_t gcgoldenoffset;
uint16_t gc_num_gprs;
uint16_t gc_gsprim_buff_depth;
uint16_t gc_parameter_cache_depth;
uint16_t gc_wave_size;
uint16_t gc_max_waves_per_simd;
uint16_t gc_lds_size;
uint8_t gc_num_max_gs_thds;
uint8_t gc_gs_table_depth;
uint8_t gc_double_offchip_lds_buffer;
uint8_t gc_max_scratch_slots_per_cu;
uint32_t sram_rm_fuses_val;
uint32_t sram_custom_rm_fuses_val;
};
struct atom_gfx_info_v2_7 {
struct atom_common_table_header table_header;
uint8_t gfxip_min_ver;
uint8_t gfxip_max_ver;
uint8_t max_shader_engines;
uint8_t reserved;
uint8_t max_cu_per_sh;
uint8_t max_sh_per_se;
uint8_t max_backends_per_se;
uint8_t max_texture_channel_caches;
uint32_t regaddr_cp_dma_src_addr;
uint32_t regaddr_cp_dma_src_addr_hi;
uint32_t regaddr_cp_dma_dst_addr;
uint32_t regaddr_cp_dma_dst_addr_hi;
uint32_t regaddr_cp_dma_command;
uint32_t regaddr_cp_status;
uint32_t regaddr_rlc_gpu_clock_32;
uint32_t rlc_gpu_timer_refclk;
uint8_t active_cu_per_sh;
uint8_t active_rb_per_se;
uint16_t gcgoldenoffset;
uint16_t gc_num_gprs;
uint16_t gc_gsprim_buff_depth;
uint16_t gc_parameter_cache_depth;
uint16_t gc_wave_size;
uint16_t gc_max_waves_per_simd;
uint16_t gc_lds_size;
uint8_t gc_num_max_gs_thds;
uint8_t gc_gs_table_depth;
uint8_t gc_double_offchip_lds_buffer;
uint8_t gc_max_scratch_slots_per_cu;
uint32_t sram_rm_fuses_val;
uint32_t sram_custom_rm_fuses_val;
uint8_t cut_cu;
uint8_t active_cu_total;
uint8_t cu_reserved[2];
uint32_t gc_config;
uint8_t inactive_cu_per_se[8];
uint32_t reserved2[6];
};
/*
***************************************************************************
Data Table smu_info structure
***************************************************************************
*/
struct atom_smu_info_v3_1
{
struct atom_common_table_header table_header;
uint8_t smuip_min_ver;
uint8_t smuip_max_ver;
uint8_t smu_rsd1;
uint8_t gpuclk_ss_mode; // enum of atom_spread_spectrum_mode
uint16_t sclk_ss_percentage;
uint16_t sclk_ss_rate_10hz;
uint16_t gpuclk_ss_percentage; // in unit of 0.001%
uint16_t gpuclk_ss_rate_10hz;
uint32_t core_refclk_10khz;
uint8_t ac_dc_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for AC/DC switching, =0xff means invalid
uint8_t ac_dc_polarity; // GPIO polarity for AC/DC switching
uint8_t vr0hot_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for VR0 HOT event, =0xff means invalid
uint8_t vr0hot_polarity; // GPIO polarity for VR0 HOT event
uint8_t vr1hot_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for VR1 HOT event , =0xff means invalid
uint8_t vr1hot_polarity; // GPIO polarity for VR1 HOT event
uint8_t fw_ctf_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for CTF, =0xff means invalid
uint8_t fw_ctf_polarity; // GPIO polarity for CTF
};
struct atom_smu_info_v3_2 {
struct atom_common_table_header table_header;
uint8_t smuip_min_ver;
uint8_t smuip_max_ver;
uint8_t smu_rsd1;
uint8_t gpuclk_ss_mode;
uint16_t sclk_ss_percentage;
uint16_t sclk_ss_rate_10hz;
uint16_t gpuclk_ss_percentage; // in unit of 0.001%
uint16_t gpuclk_ss_rate_10hz;
uint32_t core_refclk_10khz;
uint8_t ac_dc_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for AC/DC switching, =0xff means invalid
uint8_t ac_dc_polarity; // GPIO polarity for AC/DC switching
uint8_t vr0hot_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for VR0 HOT event, =0xff means invalid
uint8_t vr0hot_polarity; // GPIO polarity for VR0 HOT event
uint8_t vr1hot_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for VR1 HOT event , =0xff means invalid
uint8_t vr1hot_polarity; // GPIO polarity for VR1 HOT event
uint8_t fw_ctf_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for CTF, =0xff means invalid
uint8_t fw_ctf_polarity; // GPIO polarity for CTF
uint8_t pcc_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for PCC, =0xff means invalid
uint8_t pcc_gpio_polarity; // GPIO polarity for CTF
uint16_t smugoldenoffset;
uint32_t gpupll_vco_freq_10khz;
uint32_t bootup_smnclk_10khz;
uint32_t bootup_socclk_10khz;
uint32_t bootup_mp0clk_10khz;
uint32_t bootup_mp1clk_10khz;
uint32_t bootup_lclk_10khz;
uint32_t bootup_dcefclk_10khz;
uint32_t ctf_threshold_override_value;
uint32_t reserved[5];
};
struct atom_smu_info_v3_3 {
struct atom_common_table_header table_header;
uint8_t smuip_min_ver;
uint8_t smuip_max_ver;
uint8_t waflclk_ss_mode;
uint8_t gpuclk_ss_mode;
uint16_t sclk_ss_percentage;
uint16_t sclk_ss_rate_10hz;
uint16_t gpuclk_ss_percentage; // in unit of 0.001%
uint16_t gpuclk_ss_rate_10hz;
uint32_t core_refclk_10khz;
uint8_t ac_dc_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for AC/DC switching, =0xff means invalid
uint8_t ac_dc_polarity; // GPIO polarity for AC/DC switching
uint8_t vr0hot_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for VR0 HOT event, =0xff means invalid
uint8_t vr0hot_polarity; // GPIO polarity for VR0 HOT event
uint8_t vr1hot_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for VR1 HOT event , =0xff means invalid
uint8_t vr1hot_polarity; // GPIO polarity for VR1 HOT event
uint8_t fw_ctf_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for CTF, =0xff means invalid
uint8_t fw_ctf_polarity; // GPIO polarity for CTF
uint8_t pcc_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for PCC, =0xff means invalid
uint8_t pcc_gpio_polarity; // GPIO polarity for CTF
uint16_t smugoldenoffset;
uint32_t gpupll_vco_freq_10khz;
uint32_t bootup_smnclk_10khz;
uint32_t bootup_socclk_10khz;
uint32_t bootup_mp0clk_10khz;
uint32_t bootup_mp1clk_10khz;
uint32_t bootup_lclk_10khz;
uint32_t bootup_dcefclk_10khz;
uint32_t ctf_threshold_override_value;
uint32_t syspll3_0_vco_freq_10khz;
uint32_t syspll3_1_vco_freq_10khz;
uint32_t bootup_fclk_10khz;
uint32_t bootup_waflclk_10khz;
uint32_t smu_info_caps;
uint16_t waflclk_ss_percentage; // in unit of 0.001%
uint16_t smuinitoffset;
uint32_t reserved;
};
/*
***************************************************************************
Data Table smc_dpm_info structure
***************************************************************************
*/
struct atom_smc_dpm_info_v4_1
{
struct atom_common_table_header table_header;
uint8_t liquid1_i2c_address;
uint8_t liquid2_i2c_address;
uint8_t vr_i2c_address;
uint8_t plx_i2c_address;
uint8_t liquid_i2c_linescl;
uint8_t liquid_i2c_linesda;
uint8_t vr_i2c_linescl;
uint8_t vr_i2c_linesda;
uint8_t plx_i2c_linescl;
uint8_t plx_i2c_linesda;
uint8_t vrsensorpresent;
uint8_t liquidsensorpresent;
uint16_t maxvoltagestepgfx;
uint16_t maxvoltagestepsoc;
uint8_t vddgfxvrmapping;
uint8_t vddsocvrmapping;
uint8_t vddmem0vrmapping;
uint8_t vddmem1vrmapping;
uint8_t gfxulvphasesheddingmask;
uint8_t soculvphasesheddingmask;
uint8_t padding8_v[2];
uint16_t gfxmaxcurrent;
uint8_t gfxoffset;
uint8_t padding_telemetrygfx;
uint16_t socmaxcurrent;
uint8_t socoffset;
uint8_t padding_telemetrysoc;
uint16_t mem0maxcurrent;
uint8_t mem0offset;
uint8_t padding_telemetrymem0;
uint16_t mem1maxcurrent;
uint8_t mem1offset;
uint8_t padding_telemetrymem1;
uint8_t acdcgpio;
uint8_t acdcpolarity;
uint8_t vr0hotgpio;
uint8_t vr0hotpolarity;
uint8_t vr1hotgpio;
uint8_t vr1hotpolarity;
uint8_t padding1;
uint8_t padding2;
uint8_t ledpin0;
uint8_t ledpin1;
uint8_t ledpin2;
uint8_t padding8_4;
uint8_t pllgfxclkspreadenabled;
uint8_t pllgfxclkspreadpercent;
uint16_t pllgfxclkspreadfreq;
uint8_t uclkspreadenabled;
uint8_t uclkspreadpercent;
uint16_t uclkspreadfreq;
uint8_t socclkspreadenabled;
uint8_t socclkspreadpercent;
uint16_t socclkspreadfreq;
uint8_t acggfxclkspreadenabled;
uint8_t acggfxclkspreadpercent;
uint16_t acggfxclkspreadfreq;
uint8_t Vr2_I2C_address;
uint8_t padding_vr2[3];
uint32_t boardreserved[9];
};
/*
***************************************************************************
Data Table smc_dpm_info structure
***************************************************************************
*/
struct atom_smc_dpm_info_v4_3
{
struct atom_common_table_header table_header;
uint8_t liquid1_i2c_address;
uint8_t liquid2_i2c_address;
uint8_t vr_i2c_address;
uint8_t plx_i2c_address;
uint8_t liquid_i2c_linescl;
uint8_t liquid_i2c_linesda;
uint8_t vr_i2c_linescl;
uint8_t vr_i2c_linesda;
uint8_t plx_i2c_linescl;
uint8_t plx_i2c_linesda;
uint8_t vrsensorpresent;
uint8_t liquidsensorpresent;
uint16_t maxvoltagestepgfx;
uint16_t maxvoltagestepsoc;
uint8_t vddgfxvrmapping;
uint8_t vddsocvrmapping;
uint8_t vddmem0vrmapping;
uint8_t vddmem1vrmapping;
uint8_t gfxulvphasesheddingmask;
uint8_t soculvphasesheddingmask;
uint8_t externalsensorpresent;
uint8_t padding8_v;
uint16_t gfxmaxcurrent;
uint8_t gfxoffset;
uint8_t padding_telemetrygfx;
uint16_t socmaxcurrent;
uint8_t socoffset;
uint8_t padding_telemetrysoc;
uint16_t mem0maxcurrent;
uint8_t mem0offset;
uint8_t padding_telemetrymem0;
uint16_t mem1maxcurrent;
uint8_t mem1offset;
uint8_t padding_telemetrymem1;
uint8_t acdcgpio;
uint8_t acdcpolarity;
uint8_t vr0hotgpio;
uint8_t vr0hotpolarity;
uint8_t vr1hotgpio;
uint8_t vr1hotpolarity;
uint8_t padding1;
uint8_t padding2;
uint8_t ledpin0;
uint8_t ledpin1;
uint8_t ledpin2;
uint8_t padding8_4;
uint8_t pllgfxclkspreadenabled;
uint8_t pllgfxclkspreadpercent;
uint16_t pllgfxclkspreadfreq;
uint8_t uclkspreadenabled;
uint8_t uclkspreadpercent;
uint16_t uclkspreadfreq;
uint8_t fclkspreadenabled;
uint8_t fclkspreadpercent;
uint16_t fclkspreadfreq;
uint8_t fllgfxclkspreadenabled;
uint8_t fllgfxclkspreadpercent;
uint16_t fllgfxclkspreadfreq;
uint32_t boardreserved[10];
};
struct smudpm_i2ccontrollerconfig_t {
uint32_t enabled;
uint32_t slaveaddress;
uint32_t controllerport;
uint32_t controllername;
uint32_t thermalthrottler;
uint32_t i2cprotocol;
uint32_t i2cspeed;
};
struct atom_smc_dpm_info_v4_4
{
struct atom_common_table_header table_header;
uint32_t i2c_padding[3];
uint16_t maxvoltagestepgfx;
uint16_t maxvoltagestepsoc;
uint8_t vddgfxvrmapping;
uint8_t vddsocvrmapping;
uint8_t vddmem0vrmapping;
uint8_t vddmem1vrmapping;
uint8_t gfxulvphasesheddingmask;
uint8_t soculvphasesheddingmask;
uint8_t externalsensorpresent;
uint8_t padding8_v;
uint16_t gfxmaxcurrent;
uint8_t gfxoffset;
uint8_t padding_telemetrygfx;
uint16_t socmaxcurrent;
uint8_t socoffset;
uint8_t padding_telemetrysoc;
uint16_t mem0maxcurrent;
uint8_t mem0offset;
uint8_t padding_telemetrymem0;
uint16_t mem1maxcurrent;
uint8_t mem1offset;
uint8_t padding_telemetrymem1;
uint8_t acdcgpio;
uint8_t acdcpolarity;
uint8_t vr0hotgpio;
uint8_t vr0hotpolarity;
uint8_t vr1hotgpio;
uint8_t vr1hotpolarity;
uint8_t padding1;
uint8_t padding2;
uint8_t ledpin0;
uint8_t ledpin1;
uint8_t ledpin2;
uint8_t padding8_4;
uint8_t pllgfxclkspreadenabled;
uint8_t pllgfxclkspreadpercent;
uint16_t pllgfxclkspreadfreq;
uint8_t uclkspreadenabled;
uint8_t uclkspreadpercent;
uint16_t uclkspreadfreq;
uint8_t fclkspreadenabled;
uint8_t fclkspreadpercent;
uint16_t fclkspreadfreq;
uint8_t fllgfxclkspreadenabled;
uint8_t fllgfxclkspreadpercent;
uint16_t fllgfxclkspreadfreq;
struct smudpm_i2ccontrollerconfig_t i2ccontrollers[7];
uint32_t boardreserved[10];
};
enum smudpm_v4_5_i2ccontrollername_e{
SMC_V4_5_I2C_CONTROLLER_NAME_VR_GFX = 0,
SMC_V4_5_I2C_CONTROLLER_NAME_VR_SOC,
SMC_V4_5_I2C_CONTROLLER_NAME_VR_VDDCI,
SMC_V4_5_I2C_CONTROLLER_NAME_VR_MVDD,
SMC_V4_5_I2C_CONTROLLER_NAME_LIQUID0,
SMC_V4_5_I2C_CONTROLLER_NAME_LIQUID1,
SMC_V4_5_I2C_CONTROLLER_NAME_PLX,
SMC_V4_5_I2C_CONTROLLER_NAME_SPARE,
SMC_V4_5_I2C_CONTROLLER_NAME_COUNT,
};
enum smudpm_v4_5_i2ccontrollerthrottler_e{
SMC_V4_5_I2C_CONTROLLER_THROTTLER_TYPE_NONE = 0,
SMC_V4_5_I2C_CONTROLLER_THROTTLER_VR_GFX,
SMC_V4_5_I2C_CONTROLLER_THROTTLER_VR_SOC,
SMC_V4_5_I2C_CONTROLLER_THROTTLER_VR_VDDCI,
SMC_V4_5_I2C_CONTROLLER_THROTTLER_VR_MVDD,
SMC_V4_5_I2C_CONTROLLER_THROTTLER_LIQUID0,
SMC_V4_5_I2C_CONTROLLER_THROTTLER_LIQUID1,
SMC_V4_5_I2C_CONTROLLER_THROTTLER_PLX,
SMC_V4_5_I2C_CONTROLLER_THROTTLER_COUNT,
};
enum smudpm_v4_5_i2ccontrollerprotocol_e{
SMC_V4_5_I2C_CONTROLLER_PROTOCOL_VR_0,
SMC_V4_5_I2C_CONTROLLER_PROTOCOL_VR_1,
SMC_V4_5_I2C_CONTROLLER_PROTOCOL_TMP_0,
SMC_V4_5_I2C_CONTROLLER_PROTOCOL_TMP_1,
SMC_V4_5_I2C_CONTROLLER_PROTOCOL_SPARE_0,
SMC_V4_5_I2C_CONTROLLER_PROTOCOL_SPARE_1,
SMC_V4_5_I2C_CONTROLLER_PROTOCOL_COUNT,
};
struct smudpm_i2c_controller_config_v2
{
uint8_t Enabled;
uint8_t Speed;
uint8_t Padding[2];
uint32_t SlaveAddress;
uint8_t ControllerPort;
uint8_t ControllerName;
uint8_t ThermalThrotter;
uint8_t I2cProtocol;
};
struct atom_smc_dpm_info_v4_5
{
struct atom_common_table_header table_header;
// SECTION: BOARD PARAMETERS
// I2C Control
struct smudpm_i2c_controller_config_v2 I2cControllers[8];
// SVI2 Board Parameters
uint16_t MaxVoltageStepGfx; // In mV(Q2) Max voltage step that SMU will request. Multiple steps are taken if voltage change exceeds this value.
uint16_t MaxVoltageStepSoc; // In mV(Q2) Max voltage step that SMU will request. Multiple steps are taken if voltage change exceeds this value.
uint8_t VddGfxVrMapping; // Use VR_MAPPING* bitfields
uint8_t VddSocVrMapping; // Use VR_MAPPING* bitfields
uint8_t VddMem0VrMapping; // Use VR_MAPPING* bitfields
uint8_t VddMem1VrMapping; // Use VR_MAPPING* bitfields
uint8_t GfxUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode
uint8_t SocUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode
uint8_t ExternalSensorPresent; // External RDI connected to TMON (aka TEMP IN)
uint8_t Padding8_V;
// Telemetry Settings
uint16_t GfxMaxCurrent; // in Amps
uint8_t GfxOffset; // in Amps
uint8_t Padding_TelemetryGfx;
uint16_t SocMaxCurrent; // in Amps
uint8_t SocOffset; // in Amps
uint8_t Padding_TelemetrySoc;
uint16_t Mem0MaxCurrent; // in Amps
uint8_t Mem0Offset; // in Amps
uint8_t Padding_TelemetryMem0;
uint16_t Mem1MaxCurrent; // in Amps
uint8_t Mem1Offset; // in Amps
uint8_t Padding_TelemetryMem1;
// GPIO Settings
uint8_t AcDcGpio; // GPIO pin configured for AC/DC switching
uint8_t AcDcPolarity; // GPIO polarity for AC/DC switching
uint8_t VR0HotGpio; // GPIO pin configured for VR0 HOT event
uint8_t VR0HotPolarity; // GPIO polarity for VR0 HOT event
uint8_t VR1HotGpio; // GPIO pin configured for VR1 HOT event
uint8_t VR1HotPolarity; // GPIO polarity for VR1 HOT event
uint8_t GthrGpio; // GPIO pin configured for GTHR Event
uint8_t GthrPolarity; // replace GPIO polarity for GTHR
// LED Display Settings
uint8_t LedPin0; // GPIO number for LedPin[0]
uint8_t LedPin1; // GPIO number for LedPin[1]
uint8_t LedPin2; // GPIO number for LedPin[2]
uint8_t padding8_4;
// GFXCLK PLL Spread Spectrum
uint8_t PllGfxclkSpreadEnabled; // on or off
uint8_t PllGfxclkSpreadPercent; // Q4.4
uint16_t PllGfxclkSpreadFreq; // kHz
// GFXCLK DFLL Spread Spectrum
uint8_t DfllGfxclkSpreadEnabled; // on or off
uint8_t DfllGfxclkSpreadPercent; // Q4.4
uint16_t DfllGfxclkSpreadFreq; // kHz
// UCLK Spread Spectrum
uint8_t UclkSpreadEnabled; // on or off
uint8_t UclkSpreadPercent; // Q4.4
uint16_t UclkSpreadFreq; // kHz
// SOCCLK Spread Spectrum
uint8_t SoclkSpreadEnabled; // on or off
uint8_t SocclkSpreadPercent; // Q4.4
uint16_t SocclkSpreadFreq; // kHz
// Total board power
uint16_t TotalBoardPower; //Only needed for TCP Estimated case, where TCP = TGP+Total Board Power
uint16_t BoardPadding;
// Mvdd Svi2 Div Ratio Setting
uint32_t MvddRatio; // This is used for MVDD Vid workaround. It has 16 fractional bits (Q16.16)
uint32_t BoardReserved[9];
};
struct atom_smc_dpm_info_v4_6
{
struct atom_common_table_header table_header;
// section: board parameters
uint32_t i2c_padding[3]; // old i2c control are moved to new area
uint16_t maxvoltagestepgfx; // in mv(q2) max voltage step that smu will request. multiple steps are taken if voltage change exceeds this value.
uint16_t maxvoltagestepsoc; // in mv(q2) max voltage step that smu will request. multiple steps are taken if voltage change exceeds this value.
uint8_t vddgfxvrmapping; // use vr_mapping* bitfields
uint8_t vddsocvrmapping; // use vr_mapping* bitfields
uint8_t vddmemvrmapping; // use vr_mapping* bitfields
uint8_t boardvrmapping; // use vr_mapping* bitfields
uint8_t gfxulvphasesheddingmask; // set this to 1 to set psi0/1 to 1 in ulv mode
uint8_t externalsensorpresent; // external rdi connected to tmon (aka temp in)
uint8_t padding8_v[2];
// telemetry settings
uint16_t gfxmaxcurrent; // in amps
uint8_t gfxoffset; // in amps
uint8_t padding_telemetrygfx;
uint16_t socmaxcurrent; // in amps
uint8_t socoffset; // in amps
uint8_t padding_telemetrysoc;
uint16_t memmaxcurrent; // in amps
uint8_t memoffset; // in amps
uint8_t padding_telemetrymem;
uint16_t boardmaxcurrent; // in amps
uint8_t boardoffset; // in amps
uint8_t padding_telemetryboardinput;
// gpio settings
uint8_t vr0hotgpio; // gpio pin configured for vr0 hot event
uint8_t vr0hotpolarity; // gpio polarity for vr0 hot event
uint8_t vr1hotgpio; // gpio pin configured for vr1 hot event
uint8_t vr1hotpolarity; // gpio polarity for vr1 hot event
// gfxclk pll spread spectrum
uint8_t pllgfxclkspreadenabled; // on or off
uint8_t pllgfxclkspreadpercent; // q4.4
uint16_t pllgfxclkspreadfreq; // khz
// uclk spread spectrum
uint8_t uclkspreadenabled; // on or off
uint8_t uclkspreadpercent; // q4.4
uint16_t uclkspreadfreq; // khz
// fclk spread spectrum
uint8_t fclkspreadenabled; // on or off
uint8_t fclkspreadpercent; // q4.4
uint16_t fclkspreadfreq; // khz
// gfxclk fll spread spectrum
uint8_t fllgfxclkspreadenabled; // on or off
uint8_t fllgfxclkspreadpercent; // q4.4
uint16_t fllgfxclkspreadfreq; // khz
// i2c controller structure
struct smudpm_i2c_controller_config_v2 i2ccontrollers[8];
// memory section
uint32_t memorychannelenabled; // for dram use only, max 32 channels enabled bit mask.
uint8_t drambitwidth; // for dram use only. see dram bit width type defines
uint8_t paddingmem[3];
// total board power
uint16_t totalboardpower; //only needed for tcp estimated case, where tcp = tgp+total board power
uint16_t boardpadding;
// section: xgmi training
uint8_t xgmilinkspeed[4];
uint8_t xgmilinkwidth[4];
uint16_t xgmifclkfreq[4];
uint16_t xgmisocvoltage[4];
// reserved
uint32_t boardreserved[10];
};
struct atom_smc_dpm_info_v4_7
{
struct atom_common_table_header table_header;
// SECTION: BOARD PARAMETERS
// I2C Control
struct smudpm_i2c_controller_config_v2 I2cControllers[8];
// SVI2 Board Parameters
uint16_t MaxVoltageStepGfx; // In mV(Q2) Max voltage step that SMU will request. Multiple steps are taken if voltage change exceeds this value.
uint16_t MaxVoltageStepSoc; // In mV(Q2) Max voltage step that SMU will request. Multiple steps are taken if voltage change exceeds this value.
uint8_t VddGfxVrMapping; // Use VR_MAPPING* bitfields
uint8_t VddSocVrMapping; // Use VR_MAPPING* bitfields
uint8_t VddMem0VrMapping; // Use VR_MAPPING* bitfields
uint8_t VddMem1VrMapping; // Use VR_MAPPING* bitfields
uint8_t GfxUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode
uint8_t SocUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode
uint8_t ExternalSensorPresent; // External RDI connected to TMON (aka TEMP IN)
uint8_t Padding8_V;
// Telemetry Settings
uint16_t GfxMaxCurrent; // in Amps
uint8_t GfxOffset; // in Amps
uint8_t Padding_TelemetryGfx;
uint16_t SocMaxCurrent; // in Amps
uint8_t SocOffset; // in Amps
uint8_t Padding_TelemetrySoc;
uint16_t Mem0MaxCurrent; // in Amps
uint8_t Mem0Offset; // in Amps
uint8_t Padding_TelemetryMem0;
uint16_t Mem1MaxCurrent; // in Amps
uint8_t Mem1Offset; // in Amps
uint8_t Padding_TelemetryMem1;
// GPIO Settings
uint8_t AcDcGpio; // GPIO pin configured for AC/DC switching
uint8_t AcDcPolarity; // GPIO polarity for AC/DC switching
uint8_t VR0HotGpio; // GPIO pin configured for VR0 HOT event
uint8_t VR0HotPolarity; // GPIO polarity for VR0 HOT event
uint8_t VR1HotGpio; // GPIO pin configured for VR1 HOT event
uint8_t VR1HotPolarity; // GPIO polarity for VR1 HOT event
uint8_t GthrGpio; // GPIO pin configured for GTHR Event
uint8_t GthrPolarity; // replace GPIO polarity for GTHR
// LED Display Settings
uint8_t LedPin0; // GPIO number for LedPin[0]
uint8_t LedPin1; // GPIO number for LedPin[1]
uint8_t LedPin2; // GPIO number for LedPin[2]
uint8_t padding8_4;
// GFXCLK PLL Spread Spectrum
uint8_t PllGfxclkSpreadEnabled; // on or off
uint8_t PllGfxclkSpreadPercent; // Q4.4
uint16_t PllGfxclkSpreadFreq; // kHz
// GFXCLK DFLL Spread Spectrum
uint8_t DfllGfxclkSpreadEnabled; // on or off
uint8_t DfllGfxclkSpreadPercent; // Q4.4
uint16_t DfllGfxclkSpreadFreq; // kHz
// UCLK Spread Spectrum
uint8_t UclkSpreadEnabled; // on or off
uint8_t UclkSpreadPercent; // Q4.4
uint16_t UclkSpreadFreq; // kHz
// SOCCLK Spread Spectrum
uint8_t SoclkSpreadEnabled; // on or off
uint8_t SocclkSpreadPercent; // Q4.4
uint16_t SocclkSpreadFreq; // kHz
// Total board power
uint16_t TotalBoardPower; //Only needed for TCP Estimated case, where TCP = TGP+Total Board Power
uint16_t BoardPadding;
// Mvdd Svi2 Div Ratio Setting
uint32_t MvddRatio; // This is used for MVDD Vid workaround. It has 16 fractional bits (Q16.16)
// GPIO pins for I2C communications with 2nd controller for Input Telemetry Sequence
uint8_t GpioI2cScl; // Serial Clock
uint8_t GpioI2cSda; // Serial Data
uint16_t GpioPadding;
// Additional LED Display Settings
uint8_t LedPin3; // GPIO number for LedPin[3] - PCIE GEN Speed
uint8_t LedPin4; // GPIO number for LedPin[4] - PMFW Error Status
uint16_t LedEnableMask;
// Power Limit Scalars
uint8_t PowerLimitScalar[4]; //[PPT_THROTTLER_COUNT]
uint8_t MvddUlvPhaseSheddingMask;
uint8_t VddciUlvPhaseSheddingMask;
uint8_t Padding8_Psi1;
uint8_t Padding8_Psi2;
uint32_t BoardReserved[5];
};
struct smudpm_i2c_controller_config_v3
{
uint8_t Enabled;
uint8_t Speed;
uint8_t SlaveAddress;
uint8_t ControllerPort;
uint8_t ControllerName;
uint8_t ThermalThrotter;
uint8_t I2cProtocol;
uint8_t PaddingConfig;
};
struct atom_smc_dpm_info_v4_9
{
struct atom_common_table_header table_header;
//SECTION: Gaming Clocks
//uint32_t GamingClk[6];
// SECTION: I2C Control
struct smudpm_i2c_controller_config_v3 I2cControllers[16];
uint8_t GpioScl; // GPIO Number for SCL Line, used only for CKSVII2C1
uint8_t GpioSda; // GPIO Number for SDA Line, used only for CKSVII2C1
uint8_t FchUsbPdSlaveAddr; //For requesting USB PD controller S-states via FCH I2C when entering PME turn off
uint8_t I2cSpare;
// SECTION: SVI2 Board Parameters
uint8_t VddGfxVrMapping; // Use VR_MAPPING* bitfields
uint8_t VddSocVrMapping; // Use VR_MAPPING* bitfields
uint8_t VddMem0VrMapping; // Use VR_MAPPING* bitfields
uint8_t VddMem1VrMapping; // Use VR_MAPPING* bitfields
uint8_t GfxUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode
uint8_t SocUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode
uint8_t VddciUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode
uint8_t MvddUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode
// SECTION: Telemetry Settings
uint16_t GfxMaxCurrent; // in Amps
uint8_t GfxOffset; // in Amps
uint8_t Padding_TelemetryGfx;
uint16_t SocMaxCurrent; // in Amps
uint8_t SocOffset; // in Amps
uint8_t Padding_TelemetrySoc;
uint16_t Mem0MaxCurrent; // in Amps
uint8_t Mem0Offset; // in Amps
uint8_t Padding_TelemetryMem0;
uint16_t Mem1MaxCurrent; // in Amps
uint8_t Mem1Offset; // in Amps
uint8_t Padding_TelemetryMem1;
uint32_t MvddRatio; // This is used for MVDD Svi2 Div Ratio workaround. It has 16 fractional bits (Q16.16)
// SECTION: GPIO Settings
uint8_t AcDcGpio; // GPIO pin configured for AC/DC switching
uint8_t AcDcPolarity; // GPIO polarity for AC/DC switching
uint8_t VR0HotGpio; // GPIO pin configured for VR0 HOT event
uint8_t VR0HotPolarity; // GPIO polarity for VR0 HOT event
uint8_t VR1HotGpio; // GPIO pin configured for VR1 HOT event
uint8_t VR1HotPolarity; // GPIO polarity for VR1 HOT event
uint8_t GthrGpio; // GPIO pin configured for GTHR Event
uint8_t GthrPolarity; // replace GPIO polarity for GTHR
// LED Display Settings
uint8_t LedPin0; // GPIO number for LedPin[0]
uint8_t LedPin1; // GPIO number for LedPin[1]
uint8_t LedPin2; // GPIO number for LedPin[2]
uint8_t LedEnableMask;
uint8_t LedPcie; // GPIO number for PCIE results
uint8_t LedError; // GPIO number for Error Cases
uint8_t LedSpare1[2];
// SECTION: Clock Spread Spectrum
// GFXCLK PLL Spread Spectrum
uint8_t PllGfxclkSpreadEnabled; // on or off
uint8_t PllGfxclkSpreadPercent; // Q4.4
uint16_t PllGfxclkSpreadFreq; // kHz
// GFXCLK DFLL Spread Spectrum
uint8_t DfllGfxclkSpreadEnabled; // on or off
uint8_t DfllGfxclkSpreadPercent; // Q4.4
uint16_t DfllGfxclkSpreadFreq; // kHz
// UCLK Spread Spectrum
uint8_t UclkSpreadEnabled; // on or off
uint8_t UclkSpreadPercent; // Q4.4
uint16_t UclkSpreadFreq; // kHz
// FCLK Spread Spectrum
uint8_t FclkSpreadEnabled; // on or off
uint8_t FclkSpreadPercent; // Q4.4
uint16_t FclkSpreadFreq; // kHz
// Section: Memory Config
uint32_t MemoryChannelEnabled; // For DRAM use only, Max 32 channels enabled bit mask.
uint8_t DramBitWidth; // For DRAM use only. See Dram Bit width type defines
uint8_t PaddingMem1[3];
// Section: Total Board Power
uint16_t TotalBoardPower; //Only needed for TCP Estimated case, where TCP = TGP+Total Board Power
uint16_t BoardPowerPadding;
// SECTION: XGMI Training
uint8_t XgmiLinkSpeed [4];
uint8_t XgmiLinkWidth [4];
uint16_t XgmiFclkFreq [4];
uint16_t XgmiSocVoltage [4];
// SECTION: Board Reserved
uint32_t BoardReserved[16];
};
struct atom_smc_dpm_info_v4_10
{
struct atom_common_table_header table_header;
// SECTION: BOARD PARAMETERS
// Telemetry Settings
uint16_t GfxMaxCurrent; // in Amps
uint8_t GfxOffset; // in Amps
uint8_t Padding_TelemetryGfx;
uint16_t SocMaxCurrent; // in Amps
uint8_t SocOffset; // in Amps
uint8_t Padding_TelemetrySoc;
uint16_t MemMaxCurrent; // in Amps
uint8_t MemOffset; // in Amps
uint8_t Padding_TelemetryMem;
uint16_t BoardMaxCurrent; // in Amps
uint8_t BoardOffset; // in Amps
uint8_t Padding_TelemetryBoardInput;
// Platform input telemetry voltage coefficient
uint32_t BoardVoltageCoeffA; // decode by /1000
uint32_t BoardVoltageCoeffB; // decode by /1000
// GPIO Settings
uint8_t VR0HotGpio; // GPIO pin configured for VR0 HOT event
uint8_t VR0HotPolarity; // GPIO polarity for VR0 HOT event
uint8_t VR1HotGpio; // GPIO pin configured for VR1 HOT event
uint8_t VR1HotPolarity; // GPIO polarity for VR1 HOT event
// UCLK Spread Spectrum
uint8_t UclkSpreadEnabled; // on or off
uint8_t UclkSpreadPercent; // Q4.4
uint16_t UclkSpreadFreq; // kHz
// FCLK Spread Spectrum
uint8_t FclkSpreadEnabled; // on or off
uint8_t FclkSpreadPercent; // Q4.4
uint16_t FclkSpreadFreq; // kHz
// I2C Controller Structure
struct smudpm_i2c_controller_config_v3 I2cControllers[8];
// GPIO pins for I2C communications with 2nd controller for Input Telemetry Sequence
uint8_t GpioI2cScl; // Serial Clock
uint8_t GpioI2cSda; // Serial Data
uint16_t spare5;
uint32_t reserved[16];
};
/*
***************************************************************************
Data Table asic_profiling_info structure
***************************************************************************
*/
struct atom_asic_profiling_info_v4_1
{
struct atom_common_table_header table_header;
uint32_t maxvddc;
uint32_t minvddc;
uint32_t avfs_meannsigma_acontant0;
uint32_t avfs_meannsigma_acontant1;
uint32_t avfs_meannsigma_acontant2;
uint16_t avfs_meannsigma_dc_tol_sigma;
uint16_t avfs_meannsigma_platform_mean;
uint16_t avfs_meannsigma_platform_sigma;
uint32_t gb_vdroop_table_cksoff_a0;
uint32_t gb_vdroop_table_cksoff_a1;
uint32_t gb_vdroop_table_cksoff_a2;
uint32_t gb_vdroop_table_ckson_a0;
uint32_t gb_vdroop_table_ckson_a1;
uint32_t gb_vdroop_table_ckson_a2;
uint32_t avfsgb_fuse_table_cksoff_m1;
uint32_t avfsgb_fuse_table_cksoff_m2;
uint32_t avfsgb_fuse_table_cksoff_b;
uint32_t avfsgb_fuse_table_ckson_m1;
uint32_t avfsgb_fuse_table_ckson_m2;
uint32_t avfsgb_fuse_table_ckson_b;
uint16_t max_voltage_0_25mv;
uint8_t enable_gb_vdroop_table_cksoff;
uint8_t enable_gb_vdroop_table_ckson;
uint8_t enable_gb_fuse_table_cksoff;
uint8_t enable_gb_fuse_table_ckson;
uint16_t psm_age_comfactor;
uint8_t enable_apply_avfs_cksoff_voltage;
uint8_t reserved;
uint32_t dispclk2gfxclk_a;
uint32_t dispclk2gfxclk_b;
uint32_t dispclk2gfxclk_c;
uint32_t pixclk2gfxclk_a;
uint32_t pixclk2gfxclk_b;
uint32_t pixclk2gfxclk_c;
uint32_t dcefclk2gfxclk_a;
uint32_t dcefclk2gfxclk_b;
uint32_t dcefclk2gfxclk_c;
uint32_t phyclk2gfxclk_a;
uint32_t phyclk2gfxclk_b;
uint32_t phyclk2gfxclk_c;
};
struct atom_asic_profiling_info_v4_2 {
struct atom_common_table_header table_header;
uint32_t maxvddc;
uint32_t minvddc;
uint32_t avfs_meannsigma_acontant0;
uint32_t avfs_meannsigma_acontant1;
uint32_t avfs_meannsigma_acontant2;
uint16_t avfs_meannsigma_dc_tol_sigma;
uint16_t avfs_meannsigma_platform_mean;
uint16_t avfs_meannsigma_platform_sigma;
uint32_t gb_vdroop_table_cksoff_a0;
uint32_t gb_vdroop_table_cksoff_a1;
uint32_t gb_vdroop_table_cksoff_a2;
uint32_t gb_vdroop_table_ckson_a0;
uint32_t gb_vdroop_table_ckson_a1;
uint32_t gb_vdroop_table_ckson_a2;
uint32_t avfsgb_fuse_table_cksoff_m1;
uint32_t avfsgb_fuse_table_cksoff_m2;
uint32_t avfsgb_fuse_table_cksoff_b;
uint32_t avfsgb_fuse_table_ckson_m1;
uint32_t avfsgb_fuse_table_ckson_m2;
uint32_t avfsgb_fuse_table_ckson_b;
uint16_t max_voltage_0_25mv;
uint8_t enable_gb_vdroop_table_cksoff;
uint8_t enable_gb_vdroop_table_ckson;
uint8_t enable_gb_fuse_table_cksoff;
uint8_t enable_gb_fuse_table_ckson;
uint16_t psm_age_comfactor;
uint8_t enable_apply_avfs_cksoff_voltage;
uint8_t reserved;
uint32_t dispclk2gfxclk_a;
uint32_t dispclk2gfxclk_b;
uint32_t dispclk2gfxclk_c;
uint32_t pixclk2gfxclk_a;
uint32_t pixclk2gfxclk_b;
uint32_t pixclk2gfxclk_c;
uint32_t dcefclk2gfxclk_a;
uint32_t dcefclk2gfxclk_b;
uint32_t dcefclk2gfxclk_c;
uint32_t phyclk2gfxclk_a;
uint32_t phyclk2gfxclk_b;
uint32_t phyclk2gfxclk_c;
uint32_t acg_gb_vdroop_table_a0;
uint32_t acg_gb_vdroop_table_a1;
uint32_t acg_gb_vdroop_table_a2;
uint32_t acg_avfsgb_fuse_table_m1;
uint32_t acg_avfsgb_fuse_table_m2;
uint32_t acg_avfsgb_fuse_table_b;
uint8_t enable_acg_gb_vdroop_table;
uint8_t enable_acg_gb_fuse_table;
uint32_t acg_dispclk2gfxclk_a;
uint32_t acg_dispclk2gfxclk_b;
uint32_t acg_dispclk2gfxclk_c;
uint32_t acg_pixclk2gfxclk_a;
uint32_t acg_pixclk2gfxclk_b;
uint32_t acg_pixclk2gfxclk_c;
uint32_t acg_dcefclk2gfxclk_a;
uint32_t acg_dcefclk2gfxclk_b;
uint32_t acg_dcefclk2gfxclk_c;
uint32_t acg_phyclk2gfxclk_a;
uint32_t acg_phyclk2gfxclk_b;
uint32_t acg_phyclk2gfxclk_c;
};
/*
***************************************************************************
Data Table multimedia_info structure
***************************************************************************
*/
struct atom_multimedia_info_v2_1
{
struct atom_common_table_header table_header;
uint8_t uvdip_min_ver;
uint8_t uvdip_max_ver;
uint8_t vceip_min_ver;
uint8_t vceip_max_ver;
uint16_t uvd_enc_max_input_width_pixels;
uint16_t uvd_enc_max_input_height_pixels;
uint16_t vce_enc_max_input_width_pixels;
uint16_t vce_enc_max_input_height_pixels;
uint32_t uvd_enc_max_bandwidth; // 16x16 pixels/sec, codec independent
uint32_t vce_enc_max_bandwidth; // 16x16 pixels/sec, codec independent
};
/*
***************************************************************************
Data Table umc_info structure
***************************************************************************
*/
struct atom_umc_info_v3_1
{
struct atom_common_table_header table_header;
uint32_t ucode_version;
uint32_t ucode_rom_startaddr;
uint32_t ucode_length;
uint16_t umc_reg_init_offset;
uint16_t customer_ucode_name_offset;
uint16_t mclk_ss_percentage;
uint16_t mclk_ss_rate_10hz;
uint8_t umcip_min_ver;
uint8_t umcip_max_ver;
uint8_t vram_type; //enum of atom_dgpu_vram_type
uint8_t umc_config;
uint32_t mem_refclk_10khz;
};
// umc_info.umc_config
enum atom_umc_config_def {
UMC_CONFIG__ENABLE_1KB_INTERLEAVE_MODE = 0x00000001,
UMC_CONFIG__DEFAULT_MEM_ECC_ENABLE = 0x00000002,
UMC_CONFIG__ENABLE_HBM_LANE_REPAIR = 0x00000004,
UMC_CONFIG__ENABLE_BANK_HARVESTING = 0x00000008,
UMC_CONFIG__ENABLE_PHY_REINIT = 0x00000010,
UMC_CONFIG__DISABLE_UCODE_CHKSTATUS = 0x00000020,
};
struct atom_umc_info_v3_2
{
struct atom_common_table_header table_header;
uint32_t ucode_version;
uint32_t ucode_rom_startaddr;
uint32_t ucode_length;
uint16_t umc_reg_init_offset;
uint16_t customer_ucode_name_offset;
uint16_t mclk_ss_percentage;
uint16_t mclk_ss_rate_10hz;
uint8_t umcip_min_ver;
uint8_t umcip_max_ver;
uint8_t vram_type; //enum of atom_dgpu_vram_type
uint8_t umc_config;
uint32_t mem_refclk_10khz;
uint32_t pstate_uclk_10khz[4];
uint16_t umcgoldenoffset;
uint16_t densitygoldenoffset;
};
struct atom_umc_info_v3_3
{
struct atom_common_table_header table_header;
uint32_t ucode_reserved;
uint32_t ucode_rom_startaddr;
uint32_t ucode_length;
uint16_t umc_reg_init_offset;
uint16_t customer_ucode_name_offset;
uint16_t mclk_ss_percentage;
uint16_t mclk_ss_rate_10hz;
uint8_t umcip_min_ver;
uint8_t umcip_max_ver;
uint8_t vram_type; //enum of atom_dgpu_vram_type
uint8_t umc_config;
uint32_t mem_refclk_10khz;
uint32_t pstate_uclk_10khz[4];
uint16_t umcgoldenoffset;
uint16_t densitygoldenoffset;
uint32_t umc_config1;
uint32_t bist_data_startaddr;
uint32_t reserved[2];
};
enum atom_umc_config1_def {
UMC_CONFIG1__ENABLE_PSTATE_PHASE_STORE_TRAIN = 0x00000001,
UMC_CONFIG1__ENABLE_AUTO_FRAMING = 0x00000002,
UMC_CONFIG1__ENABLE_RESTORE_BIST_DATA = 0x00000004,
UMC_CONFIG1__DISABLE_STROBE_MODE = 0x00000008,
UMC_CONFIG1__DEBUG_DATA_PARITY_EN = 0x00000010,
UMC_CONFIG1__ENABLE_ECC_CAPABLE = 0x00010000,
};
/*
***************************************************************************
Data Table vram_info structure
***************************************************************************
*/
struct atom_vram_module_v9 {
// Design Specific Values
uint32_t memory_size; // Total memory size in unit of MB for CONFIG_MEMSIZE zeros
uint32_t channel_enable; // bit vector, each bit indicate specific channel enable or not
uint32_t max_mem_clk; // max memory clock of this memory in unit of 10kHz, =0 means it is not defined
uint16_t reserved[3];
uint16_t mem_voltage; // mem_voltage
uint16_t vram_module_size; // Size of atom_vram_module_v9
uint8_t ext_memory_id; // Current memory module ID
uint8_t memory_type; // enum of atom_dgpu_vram_type
uint8_t channel_num; // Number of mem. channels supported in this module
uint8_t channel_width; // CHANNEL_16BIT/CHANNEL_32BIT/CHANNEL_64BIT
uint8_t density; // _8Mx32, _16Mx32, _16Mx16, _32Mx16
uint8_t tunningset_id; // MC phy registers set per.
uint8_t vender_rev_id; // [7:4] Revision, [3:0] Vendor code
uint8_t refreshrate; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
uint8_t hbm_ven_rev_id; // hbm_ven_rev_id
uint8_t vram_rsd2; // reserved
char dram_pnstring[20]; // part number end with '0'.
};
struct atom_vram_info_header_v2_3 {
struct atom_common_table_header table_header;
uint16_t mem_adjust_tbloffset; // offset of atom_umc_init_reg_block structure for memory vendor specific UMC adjust setting
uint16_t mem_clk_patch_tbloffset; // offset of atom_umc_init_reg_block structure for memory clock specific UMC setting
uint16_t mc_adjust_pertile_tbloffset; // offset of atom_umc_init_reg_block structure for Per Byte Offset Preset Settings
uint16_t mc_phyinit_tbloffset; // offset of atom_umc_init_reg_block structure for MC phy init set
uint16_t dram_data_remap_tbloffset; // reserved for now
uint16_t tmrs_seq_offset; // offset of HBM tmrs
uint16_t post_ucode_init_offset; // offset of atom_umc_init_reg_block structure for MC phy init after MC uCode complete umc init
uint16_t vram_rsd2;
uint8_t vram_module_num; // indicate number of VRAM module
uint8_t umcip_min_ver;
uint8_t umcip_max_ver;
uint8_t mc_phy_tile_num; // indicate the MCD tile number which use in DramDataRemapTbl and usMcAdjustPerTileTblOffset
struct atom_vram_module_v9 vram_module[16]; // just for allocation, real number of blocks is in ucNumOfVRAMModule;
};
struct atom_umc_register_addr_info{
uint32_t umc_register_addr:24;
uint32_t umc_reg_type_ind:1;
uint32_t umc_reg_rsvd:7;
};
//atom_umc_register_addr_info.
enum atom_umc_register_addr_info_flag{
b3ATOM_UMC_REG_ADD_INFO_INDIRECT_ACCESS =0x01,
};
union atom_umc_register_addr_info_access
{
struct atom_umc_register_addr_info umc_reg_addr;
uint32_t u32umc_reg_addr;
};
struct atom_umc_reg_setting_id_config{
uint32_t memclockrange:24;
uint32_t mem_blk_id:8;
};
union atom_umc_reg_setting_id_config_access
{
struct atom_umc_reg_setting_id_config umc_id_access;
uint32_t u32umc_id_access;
};
struct atom_umc_reg_setting_data_block{
union atom_umc_reg_setting_id_config_access block_id;
uint32_t u32umc_reg_data[1];
};
struct atom_umc_init_reg_block{
uint16_t umc_reg_num;
uint16_t reserved;
union atom_umc_register_addr_info_access umc_reg_list[1]; //for allocation purpose, the real number come from umc_reg_num;
struct atom_umc_reg_setting_data_block umc_reg_setting_list[1];
};
struct atom_vram_module_v10 {
// Design Specific Values
uint32_t memory_size; // Total memory size in unit of MB for CONFIG_MEMSIZE zeros
uint32_t channel_enable; // bit vector, each bit indicate specific channel enable or not
uint32_t max_mem_clk; // max memory clock of this memory in unit of 10kHz, =0 means it is not defined
uint16_t reserved[3];
uint16_t mem_voltage; // mem_voltage
uint16_t vram_module_size; // Size of atom_vram_module_v9
uint8_t ext_memory_id; // Current memory module ID
uint8_t memory_type; // enum of atom_dgpu_vram_type
uint8_t channel_num; // Number of mem. channels supported in this module
uint8_t channel_width; // CHANNEL_16BIT/CHANNEL_32BIT/CHANNEL_64BIT
uint8_t density; // _8Mx32, _16Mx32, _16Mx16, _32Mx16
uint8_t tunningset_id; // MC phy registers set per
uint8_t vender_rev_id; // [7:4] Revision, [3:0] Vendor code
uint8_t refreshrate; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
uint8_t vram_flags; // bit0= bankgroup enable
uint8_t vram_rsd2; // reserved
uint16_t gddr6_mr10; // gddr6 mode register10 value
uint16_t gddr6_mr1; // gddr6 mode register1 value
uint16_t gddr6_mr2; // gddr6 mode register2 value
uint16_t gddr6_mr7; // gddr6 mode register7 value
char dram_pnstring[20]; // part number end with '0'
};
struct atom_vram_info_header_v2_4 {
struct atom_common_table_header table_header;
uint16_t mem_adjust_tbloffset; // offset of atom_umc_init_reg_block structure for memory vendor specific UMC adjust setting
uint16_t mem_clk_patch_tbloffset; // offset of atom_umc_init_reg_block structure for memory clock specific UMC setting
uint16_t mc_adjust_pertile_tbloffset; // offset of atom_umc_init_reg_block structure for Per Byte Offset Preset Settings
uint16_t mc_phyinit_tbloffset; // offset of atom_umc_init_reg_block structure for MC phy init set
uint16_t dram_data_remap_tbloffset; // reserved for now
uint16_t reserved; // offset of reserved
uint16_t post_ucode_init_offset; // offset of atom_umc_init_reg_block structure for MC phy init after MC uCode complete umc init
uint16_t vram_rsd2;
uint8_t vram_module_num; // indicate number of VRAM module
uint8_t umcip_min_ver;
uint8_t umcip_max_ver;
uint8_t mc_phy_tile_num; // indicate the MCD tile number which use in DramDataRemapTbl and usMcAdjustPerTileTblOffset
struct atom_vram_module_v10 vram_module[16]; // just for allocation, real number of blocks is in ucNumOfVRAMModule;
};
struct atom_vram_module_v11 {
// Design Specific Values
uint32_t memory_size; // Total memory size in unit of MB for CONFIG_MEMSIZE zeros
uint32_t channel_enable; // bit vector, each bit indicate specific channel enable or not
uint16_t mem_voltage; // mem_voltage
uint16_t vram_module_size; // Size of atom_vram_module_v9
uint8_t ext_memory_id; // Current memory module ID
uint8_t memory_type; // enum of atom_dgpu_vram_type
uint8_t channel_num; // Number of mem. channels supported in this module
uint8_t channel_width; // CHANNEL_16BIT/CHANNEL_32BIT/CHANNEL_64BIT
uint8_t density; // _8Mx32, _16Mx32, _16Mx16, _32Mx16
uint8_t tunningset_id; // MC phy registers set per.
uint16_t reserved[4]; // reserved
uint8_t vender_rev_id; // [7:4] Revision, [3:0] Vendor code
uint8_t refreshrate; // [1:0]=RefreshFactor (00=8ms, 01=16ms, 10=32ms,11=64ms)
uint8_t vram_flags; // bit0= bankgroup enable
uint8_t vram_rsd2; // reserved
uint16_t gddr6_mr10; // gddr6 mode register10 value
uint16_t gddr6_mr0; // gddr6 mode register0 value
uint16_t gddr6_mr1; // gddr6 mode register1 value
uint16_t gddr6_mr2; // gddr6 mode register2 value
uint16_t gddr6_mr4; // gddr6 mode register4 value
uint16_t gddr6_mr7; // gddr6 mode register7 value
uint16_t gddr6_mr8; // gddr6 mode register8 value
char dram_pnstring[40]; // part number end with '0'.
};
struct atom_gddr6_ac_timing_v2_5 {
uint32_t u32umc_id_access;
uint8_t RL;
uint8_t WL;
uint8_t tRAS;
uint8_t tRC;
uint16_t tREFI;
uint8_t tRFC;
uint8_t tRFCpb;
uint8_t tRREFD;
uint8_t tRCDRD;
uint8_t tRCDWR;
uint8_t tRP;
uint8_t tRRDS;
uint8_t tRRDL;
uint8_t tWR;
uint8_t tWTRS;
uint8_t tWTRL;
uint8_t tFAW;
uint8_t tCCDS;
uint8_t tCCDL;
uint8_t tCRCRL;
uint8_t tCRCWL;
uint8_t tCKE;
uint8_t tCKSRE;
uint8_t tCKSRX;
uint8_t tRTPS;
uint8_t tRTPL;
uint8_t tMRD;
uint8_t tMOD;
uint8_t tXS;
uint8_t tXHP;
uint8_t tXSMRS;
uint32_t tXSH;
uint8_t tPD;
uint8_t tXP;
uint8_t tCPDED;
uint8_t tACTPDE;
uint8_t tPREPDE;
uint8_t tREFPDE;
uint8_t tMRSPDEN;
uint8_t tRDSRE;
uint8_t tWRSRE;
uint8_t tPPD;
uint8_t tCCDMW;
uint8_t tWTRTR;
uint8_t tLTLTR;
uint8_t tREFTR;
uint8_t VNDR;
uint8_t reserved[9];
};
struct atom_gddr6_bit_byte_remap {
uint32_t dphy_byteremap; //mmUMC_DPHY_ByteRemap
uint32_t dphy_bitremap0; //mmUMC_DPHY_BitRemap0
uint32_t dphy_bitremap1; //mmUMC_DPHY_BitRemap1
uint32_t dphy_bitremap2; //mmUMC_DPHY_BitRemap2
uint32_t aphy_bitremap0; //mmUMC_APHY_BitRemap0
uint32_t aphy_bitremap1; //mmUMC_APHY_BitRemap1
uint32_t phy_dram; //mmUMC_PHY_DRAM
};
struct atom_gddr6_dram_data_remap {
uint32_t table_size;
uint8_t phyintf_ck_inverted[8]; //UMC_PHY_PHYINTF_CNTL.INV_CK
struct atom_gddr6_bit_byte_remap bit_byte_remap[16];
};
struct atom_vram_info_header_v2_5 {
struct atom_common_table_header table_header;
uint16_t mem_adjust_tbloffset; // offset of atom_umc_init_reg_block structure for memory vendor specific UMC adjust settings
uint16_t gddr6_ac_timing_offset; // offset of atom_gddr6_ac_timing_v2_5 structure for memory clock specific UMC settings
uint16_t mc_adjust_pertile_tbloffset; // offset of atom_umc_init_reg_block structure for Per Byte Offset Preset Settings
uint16_t mc_phyinit_tbloffset; // offset of atom_umc_init_reg_block structure for MC phy init set
uint16_t dram_data_remap_tbloffset; // offset of atom_gddr6_dram_data_remap array to indicate DRAM data lane to GPU mapping
uint16_t reserved; // offset of reserved
uint16_t post_ucode_init_offset; // offset of atom_umc_init_reg_block structure for MC phy init after MC uCode complete umc init
uint16_t strobe_mode_patch_tbloffset; // offset of atom_umc_init_reg_block structure for Strobe Mode memory clock specific UMC settings
uint8_t vram_module_num; // indicate number of VRAM module
uint8_t umcip_min_ver;
uint8_t umcip_max_ver;
uint8_t mc_phy_tile_num; // indicate the MCD tile number which use in DramDataRemapTbl and usMcAdjustPerTileTblOffset
struct atom_vram_module_v11 vram_module[16]; // just for allocation, real number of blocks is in ucNumOfVRAMModule;
};
struct atom_vram_info_header_v2_6 {
struct atom_common_table_header table_header;
uint16_t mem_adjust_tbloffset;
uint16_t mem_clk_patch_tbloffset;
uint16_t mc_adjust_pertile_tbloffset;
uint16_t mc_phyinit_tbloffset;
uint16_t dram_data_remap_tbloffset;
uint16_t tmrs_seq_offset;
uint16_t post_ucode_init_offset;
uint16_t vram_rsd2;
uint8_t vram_module_num;
uint8_t umcip_min_ver;
uint8_t umcip_max_ver;
uint8_t mc_phy_tile_num;
struct atom_vram_module_v9 vram_module[16];
};
/*
***************************************************************************
Data Table voltageobject_info structure
***************************************************************************
*/
struct atom_i2c_data_entry
{
uint16_t i2c_reg_index; // i2c register address, can be up to 16bit
uint16_t i2c_reg_data; // i2c register data, can be up to 16bit
};
struct atom_voltage_object_header_v4{
uint8_t voltage_type; //enum atom_voltage_type
uint8_t voltage_mode; //enum atom_voltage_object_mode
uint16_t object_size; //Size of Object
};
// atom_voltage_object_header_v4.voltage_mode
enum atom_voltage_object_mode
{
VOLTAGE_OBJ_GPIO_LUT = 0, //VOLTAGE and GPIO Lookup table ->atom_gpio_voltage_object_v4
VOLTAGE_OBJ_VR_I2C_INIT_SEQ = 3, //VOLTAGE REGULATOR INIT sequece through I2C -> atom_i2c_voltage_object_v4
VOLTAGE_OBJ_PHASE_LUT = 4, //Set Vregulator Phase lookup table ->atom_gpio_voltage_object_v4
VOLTAGE_OBJ_SVID2 = 7, //Indicate voltage control by SVID2 ->atom_svid2_voltage_object_v4
VOLTAGE_OBJ_EVV = 8,
VOLTAGE_OBJ_MERGED_POWER = 9,
};
struct atom_i2c_voltage_object_v4
{
struct atom_voltage_object_header_v4 header; // voltage mode = VOLTAGE_OBJ_VR_I2C_INIT_SEQ
uint8_t regulator_id; //Indicate Voltage Regulator Id
uint8_t i2c_id;
uint8_t i2c_slave_addr;
uint8_t i2c_control_offset;
uint8_t i2c_flag; // Bit0: 0 - One byte data; 1 - Two byte data
uint8_t i2c_speed; // =0, use default i2c speed, otherwise use it in unit of kHz.
uint8_t reserved[2];
struct atom_i2c_data_entry i2cdatalut[1]; // end with 0xff
};
// ATOM_I2C_VOLTAGE_OBJECT_V3.ucVoltageControlFlag
enum atom_i2c_voltage_control_flag
{
VOLTAGE_DATA_ONE_BYTE = 0,
VOLTAGE_DATA_TWO_BYTE = 1,
};
struct atom_voltage_gpio_map_lut
{
uint32_t voltage_gpio_reg_val; // The Voltage ID which is used to program GPIO register
uint16_t voltage_level_mv; // The corresponding Voltage Value, in mV
};
struct atom_gpio_voltage_object_v4
{
struct atom_voltage_object_header_v4 header; // voltage mode = VOLTAGE_OBJ_GPIO_LUT or VOLTAGE_OBJ_PHASE_LUT
uint8_t gpio_control_id; // default is 0 which indicate control through CG VID mode
uint8_t gpio_entry_num; // indiate the entry numbers of Votlage/Gpio value Look up table
uint8_t phase_delay_us; // phase delay in unit of micro second
uint8_t reserved;
uint32_t gpio_mask_val; // GPIO Mask value
struct atom_voltage_gpio_map_lut voltage_gpio_lut[1];
};
struct atom_svid2_voltage_object_v4
{
struct atom_voltage_object_header_v4 header; // voltage mode = VOLTAGE_OBJ_SVID2
uint8_t loadline_psi1; // bit4:0= loadline setting ( Core Loadline trim and offset trim ), bit5=0:PSI1_L disable =1: PSI1_L enable
uint8_t psi0_l_vid_thresd; // VR PSI0_L VID threshold
uint8_t psi0_enable; //
uint8_t maxvstep;
uint8_t telemetry_offset;
uint8_t telemetry_gain;
uint16_t reserved1;
};
struct atom_merged_voltage_object_v4
{
struct atom_voltage_object_header_v4 header; // voltage mode = VOLTAGE_OBJ_MERGED_POWER
uint8_t merged_powerrail_type; //enum atom_voltage_type
uint8_t reserved[3];
};
union atom_voltage_object_v4{
struct atom_gpio_voltage_object_v4 gpio_voltage_obj;
struct atom_i2c_voltage_object_v4 i2c_voltage_obj;
struct atom_svid2_voltage_object_v4 svid2_voltage_obj;
struct atom_merged_voltage_object_v4 merged_voltage_obj;
};
struct atom_voltage_objects_info_v4_1
{
struct atom_common_table_header table_header;
union atom_voltage_object_v4 voltage_object[1]; //Info for Voltage control
};
/*
***************************************************************************
All Command Function structure definition
***************************************************************************
*/
/*
***************************************************************************
Structures used by asic_init
***************************************************************************
*/
struct asic_init_engine_parameters
{
uint32_t sclkfreqin10khz:24;
uint32_t engineflag:8; /* enum atom_asic_init_engine_flag */
};
struct asic_init_mem_parameters
{
uint32_t mclkfreqin10khz:24;
uint32_t memflag:8; /* enum atom_asic_init_mem_flag */
};
struct asic_init_parameters_v2_1
{
struct asic_init_engine_parameters engineparam;
struct asic_init_mem_parameters memparam;
};
struct asic_init_ps_allocation_v2_1
{
struct asic_init_parameters_v2_1 param;
uint32_t reserved[16];
};
enum atom_asic_init_engine_flag
{
b3NORMAL_ENGINE_INIT = 0,
b3SRIOV_SKIP_ASIC_INIT = 0x02,
b3SRIOV_LOAD_UCODE = 0x40,
};
enum atom_asic_init_mem_flag
{
b3NORMAL_MEM_INIT = 0,
b3DRAM_SELF_REFRESH_EXIT =0x20,
};
/*
***************************************************************************
Structures used by setengineclock
***************************************************************************
*/
struct set_engine_clock_parameters_v2_1
{
uint32_t sclkfreqin10khz:24;
uint32_t sclkflag:8; /* enum atom_set_engine_mem_clock_flag, */
uint32_t reserved[10];
};
struct set_engine_clock_ps_allocation_v2_1
{
struct set_engine_clock_parameters_v2_1 clockinfo;
uint32_t reserved[10];
};
enum atom_set_engine_mem_clock_flag
{
b3NORMAL_CHANGE_CLOCK = 0,
b3FIRST_TIME_CHANGE_CLOCK = 0x08,
b3STORE_DPM_TRAINGING = 0x40, //Applicable to memory clock change,when set, it store specific DPM mode training result
};
/*
***************************************************************************
Structures used by getengineclock
***************************************************************************
*/
struct get_engine_clock_parameter
{
uint32_t sclk_10khz; // current engine speed in 10KHz unit
uint32_t reserved;
};
/*
***************************************************************************
Structures used by setmemoryclock
***************************************************************************
*/
struct set_memory_clock_parameters_v2_1
{
uint32_t mclkfreqin10khz:24;
uint32_t mclkflag:8; /* enum atom_set_engine_mem_clock_flag, */
uint32_t reserved[10];
};
struct set_memory_clock_ps_allocation_v2_1
{
struct set_memory_clock_parameters_v2_1 clockinfo;
uint32_t reserved[10];
};
/*
***************************************************************************
Structures used by getmemoryclock
***************************************************************************
*/
struct get_memory_clock_parameter
{
uint32_t mclk_10khz; // current engine speed in 10KHz unit
uint32_t reserved;
};
/*
***************************************************************************
Structures used by setvoltage
***************************************************************************
*/
struct set_voltage_parameters_v1_4
{
uint8_t voltagetype; /* enum atom_voltage_type */
uint8_t command; /* Indicate action: Set voltage level, enum atom_set_voltage_command */
uint16_t vlevel_mv; /* real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. ) */
};
//set_voltage_parameters_v2_1.voltagemode
enum atom_set_voltage_command{
ATOM_SET_VOLTAGE = 0,
ATOM_INIT_VOLTAGE_REGULATOR = 3,
ATOM_SET_VOLTAGE_PHASE = 4,
ATOM_GET_LEAKAGE_ID = 8,
};
struct set_voltage_ps_allocation_v1_4
{
struct set_voltage_parameters_v1_4 setvoltageparam;
uint32_t reserved[10];
};
/*
***************************************************************************
Structures used by computegpuclockparam
***************************************************************************
*/
//ATOM_COMPUTE_CLOCK_FREQ.ulComputeClockFlag
enum atom_gpu_clock_type
{
COMPUTE_GPUCLK_INPUT_FLAG_DEFAULT_GPUCLK =0x00,
COMPUTE_GPUCLK_INPUT_FLAG_GFXCLK =0x01,
COMPUTE_GPUCLK_INPUT_FLAG_UCLK =0x02,
};
struct compute_gpu_clock_input_parameter_v1_8
{
uint32_t gpuclock_10khz:24; //Input= target clock, output = actual clock
uint32_t gpu_clock_type:8; //Input indicate clock type: enum atom_gpu_clock_type
uint32_t reserved[5];
};
struct compute_gpu_clock_output_parameter_v1_8
{
uint32_t gpuclock_10khz:24; //Input= target clock, output = actual clock
uint32_t dfs_did:8; //return parameter: DFS divider which is used to program to register directly
uint32_t pll_fb_mult; //Feedback Multiplier, bit 8:0 int, bit 15:12 post_div, bit 31:16 frac
uint32_t pll_ss_fbsmult; // Spread FB Mult: bit 8:0 int, bit 31:16 frac
uint16_t pll_ss_slew_frac;
uint8_t pll_ss_enable;
uint8_t reserved;
uint32_t reserved1[2];
};
/*
***************************************************************************
Structures used by ReadEfuseValue
***************************************************************************
*/
struct read_efuse_input_parameters_v3_1
{
uint16_t efuse_start_index;
uint8_t reserved;
uint8_t bitslen;
};
// ReadEfuseValue input/output parameter
union read_efuse_value_parameters_v3_1
{
struct read_efuse_input_parameters_v3_1 efuse_info;
uint32_t efusevalue;
};
/*
***************************************************************************
Structures used by getsmuclockinfo
***************************************************************************
*/
struct atom_get_smu_clock_info_parameters_v3_1
{
uint8_t syspll_id; // 0= syspll0, 1=syspll1, 2=syspll2
uint8_t clk_id; // atom_smu9_syspll0_clock_id (only valid when command == GET_SMU_CLOCK_INFO_V3_1_GET_CLOCK_FREQ )
uint8_t command; // enum of atom_get_smu_clock_info_command
uint8_t dfsdid; // =0: get DFS DID from register, >0, give DFS divider, (only valid when command == GET_SMU_CLOCK_INFO_V3_1_GET_CLOCK_FREQ )
};
enum atom_get_smu_clock_info_command
{
GET_SMU_CLOCK_INFO_V3_1_GET_CLOCK_FREQ = 0,
GET_SMU_CLOCK_INFO_V3_1_GET_PLLVCO_FREQ = 1,
GET_SMU_CLOCK_INFO_V3_1_GET_PLLREFCLK_FREQ = 2,
};
enum atom_smu9_syspll0_clock_id
{
SMU9_SYSPLL0_SMNCLK_ID = 0, // SMNCLK
SMU9_SYSPLL0_SOCCLK_ID = 1, // SOCCLK (FCLK)
SMU9_SYSPLL0_MP0CLK_ID = 2, // MP0CLK
SMU9_SYSPLL0_MP1CLK_ID = 3, // MP1CLK
SMU9_SYSPLL0_LCLK_ID = 4, // LCLK
SMU9_SYSPLL0_DCLK_ID = 5, // DCLK
SMU9_SYSPLL0_VCLK_ID = 6, // VCLK
SMU9_SYSPLL0_ECLK_ID = 7, // ECLK
SMU9_SYSPLL0_DCEFCLK_ID = 8, // DCEFCLK
SMU9_SYSPLL0_DPREFCLK_ID = 10, // DPREFCLK
SMU9_SYSPLL0_DISPCLK_ID = 11, // DISPCLK
};
enum atom_smu11_syspll_id {
SMU11_SYSPLL0_ID = 0,
SMU11_SYSPLL1_0_ID = 1,
SMU11_SYSPLL1_1_ID = 2,
SMU11_SYSPLL1_2_ID = 3,
SMU11_SYSPLL2_ID = 4,
SMU11_SYSPLL3_0_ID = 5,
SMU11_SYSPLL3_1_ID = 6,
};
enum atom_smu11_syspll0_clock_id {
SMU11_SYSPLL0_ECLK_ID = 0, // ECLK
SMU11_SYSPLL0_SOCCLK_ID = 1, // SOCCLK
SMU11_SYSPLL0_MP0CLK_ID = 2, // MP0CLK
SMU11_SYSPLL0_DCLK_ID = 3, // DCLK
SMU11_SYSPLL0_VCLK_ID = 4, // VCLK
SMU11_SYSPLL0_DCEFCLK_ID = 5, // DCEFCLK
};
enum atom_smu11_syspll1_0_clock_id {
SMU11_SYSPLL1_0_UCLKA_ID = 0, // UCLK_a
};
enum atom_smu11_syspll1_1_clock_id {
SMU11_SYSPLL1_0_UCLKB_ID = 0, // UCLK_b
};
enum atom_smu11_syspll1_2_clock_id {
SMU11_SYSPLL1_0_FCLK_ID = 0, // FCLK
};
enum atom_smu11_syspll2_clock_id {
SMU11_SYSPLL2_GFXCLK_ID = 0, // GFXCLK
};
enum atom_smu11_syspll3_0_clock_id {
SMU11_SYSPLL3_0_WAFCLK_ID = 0, // WAFCLK
SMU11_SYSPLL3_0_DISPCLK_ID = 1, // DISPCLK
SMU11_SYSPLL3_0_DPREFCLK_ID = 2, // DPREFCLK
};
enum atom_smu11_syspll3_1_clock_id {
SMU11_SYSPLL3_1_MP1CLK_ID = 0, // MP1CLK
SMU11_SYSPLL3_1_SMNCLK_ID = 1, // SMNCLK
SMU11_SYSPLL3_1_LCLK_ID = 2, // LCLK
};
enum atom_smu12_syspll_id {
SMU12_SYSPLL0_ID = 0,
SMU12_SYSPLL1_ID = 1,
SMU12_SYSPLL2_ID = 2,
SMU12_SYSPLL3_0_ID = 3,
SMU12_SYSPLL3_1_ID = 4,
};
enum atom_smu12_syspll0_clock_id {
SMU12_SYSPLL0_SMNCLK_ID = 0, // SOCCLK
SMU12_SYSPLL0_SOCCLK_ID = 1, // SOCCLK
SMU12_SYSPLL0_MP0CLK_ID = 2, // MP0CLK
SMU12_SYSPLL0_MP1CLK_ID = 3, // MP1CLK
SMU12_SYSPLL0_MP2CLK_ID = 4, // MP2CLK
SMU12_SYSPLL0_VCLK_ID = 5, // VCLK
SMU12_SYSPLL0_LCLK_ID = 6, // LCLK
SMU12_SYSPLL0_DCLK_ID = 7, // DCLK
SMU12_SYSPLL0_ACLK_ID = 8, // ACLK
SMU12_SYSPLL0_ISPCLK_ID = 9, // ISPCLK
SMU12_SYSPLL0_SHUBCLK_ID = 10, // SHUBCLK
};
enum atom_smu12_syspll1_clock_id {
SMU12_SYSPLL1_DISPCLK_ID = 0, // DISPCLK
SMU12_SYSPLL1_DPPCLK_ID = 1, // DPPCLK
SMU12_SYSPLL1_DPREFCLK_ID = 2, // DPREFCLK
SMU12_SYSPLL1_DCFCLK_ID = 3, // DCFCLK
};
enum atom_smu12_syspll2_clock_id {
SMU12_SYSPLL2_Pre_GFXCLK_ID = 0, // Pre_GFXCLK
};
enum atom_smu12_syspll3_0_clock_id {
SMU12_SYSPLL3_0_FCLK_ID = 0, // FCLK
};
enum atom_smu12_syspll3_1_clock_id {
SMU12_SYSPLL3_1_UMCCLK_ID = 0, // UMCCLK
};
struct atom_get_smu_clock_info_output_parameters_v3_1
{
union {
uint32_t smu_clock_freq_hz;
uint32_t syspllvcofreq_10khz;
uint32_t sysspllrefclk_10khz;
}atom_smu_outputclkfreq;
};
/*
***************************************************************************
Structures used by dynamicmemorysettings
***************************************************************************
*/
enum atom_dynamic_memory_setting_command
{
COMPUTE_MEMORY_PLL_PARAM = 1,
COMPUTE_ENGINE_PLL_PARAM = 2,
ADJUST_MC_SETTING_PARAM = 3,
};
/* when command = COMPUTE_MEMORY_PLL_PARAM or ADJUST_MC_SETTING_PARAM */
struct dynamic_mclk_settings_parameters_v2_1
{
uint32_t mclk_10khz:24; //Input= target mclk
uint32_t command:8; //command enum of atom_dynamic_memory_setting_command
uint32_t reserved;
};
/* when command = COMPUTE_ENGINE_PLL_PARAM */
struct dynamic_sclk_settings_parameters_v2_1
{
uint32_t sclk_10khz:24; //Input= target mclk
uint32_t command:8; //command enum of atom_dynamic_memory_setting_command
uint32_t mclk_10khz;
uint32_t reserved;
};
union dynamic_memory_settings_parameters_v2_1
{
struct dynamic_mclk_settings_parameters_v2_1 mclk_setting;
struct dynamic_sclk_settings_parameters_v2_1 sclk_setting;
};
/*
***************************************************************************
Structures used by memorytraining
***************************************************************************
*/
enum atom_umc6_0_ucode_function_call_enum_id
{
UMC60_UCODE_FUNC_ID_REINIT = 0,
UMC60_UCODE_FUNC_ID_ENTER_SELFREFRESH = 1,
UMC60_UCODE_FUNC_ID_EXIT_SELFREFRESH = 2,
};
struct memory_training_parameters_v2_1
{
uint8_t ucode_func_id;
uint8_t ucode_reserved[3];
uint32_t reserved[5];
};
/*
***************************************************************************
Structures used by setpixelclock
***************************************************************************
*/
struct set_pixel_clock_parameter_v1_7
{
uint32_t pixclk_100hz; // target the pixel clock to drive the CRTC timing in unit of 100Hz.
uint8_t pll_id; // ATOM_PHY_PLL0/ATOM_PHY_PLL1/ATOM_PPLL0
uint8_t encoderobjid; // ASIC encoder id defined in objectId.h,
// indicate which graphic encoder will be used.
uint8_t encoder_mode; // Encoder mode:
uint8_t miscinfo; // enum atom_set_pixel_clock_v1_7_misc_info
uint8_t crtc_id; // enum of atom_crtc_def
uint8_t deep_color_ratio; // HDMI panel bit depth: enum atom_set_pixel_clock_v1_7_deepcolor_ratio
uint8_t reserved1[2];
uint32_t reserved2;
};
//ucMiscInfo
enum atom_set_pixel_clock_v1_7_misc_info
{
PIXEL_CLOCK_V7_MISC_FORCE_PROG_PPLL = 0x01,
PIXEL_CLOCK_V7_MISC_PROG_PHYPLL = 0x02,
PIXEL_CLOCK_V7_MISC_YUV420_MODE = 0x04,
PIXEL_CLOCK_V7_MISC_DVI_DUALLINK_EN = 0x08,
PIXEL_CLOCK_V7_MISC_REF_DIV_SRC = 0x30,
PIXEL_CLOCK_V7_MISC_REF_DIV_SRC_XTALIN = 0x00,
PIXEL_CLOCK_V7_MISC_REF_DIV_SRC_PCIE = 0x10,
PIXEL_CLOCK_V7_MISC_REF_DIV_SRC_GENLK = 0x20,
PIXEL_CLOCK_V7_MISC_REF_DIV_SRC_REFPAD = 0x30,
PIXEL_CLOCK_V7_MISC_ATOMIC_UPDATE = 0x40,
PIXEL_CLOCK_V7_MISC_FORCE_SS_DIS = 0x80,
};
/* deep_color_ratio */
enum atom_set_pixel_clock_v1_7_deepcolor_ratio
{
PIXEL_CLOCK_V7_DEEPCOLOR_RATIO_DIS = 0x00, //00 - DCCG_DEEP_COLOR_DTO_DISABLE: Disable Deep Color DTO
PIXEL_CLOCK_V7_DEEPCOLOR_RATIO_5_4 = 0x01, //01 - DCCG_DEEP_COLOR_DTO_5_4_RATIO: Set Deep Color DTO to 5:4
PIXEL_CLOCK_V7_DEEPCOLOR_RATIO_3_2 = 0x02, //02 - DCCG_DEEP_COLOR_DTO_3_2_RATIO: Set Deep Color DTO to 3:2
PIXEL_CLOCK_V7_DEEPCOLOR_RATIO_2_1 = 0x03, //03 - DCCG_DEEP_COLOR_DTO_2_1_RATIO: Set Deep Color DTO to 2:1
};
/*
***************************************************************************
Structures used by setdceclock
***************************************************************************
*/
// SetDCEClock input parameter for DCE11.2( ELM and BF ) and above
struct set_dce_clock_parameters_v2_1
{
uint32_t dceclk_10khz; // target DCE frequency in unit of 10KHZ, return real DISPCLK/DPREFCLK frequency.
uint8_t dceclktype; // =0: DISPCLK =1: DPREFCLK =2: PIXCLK
uint8_t dceclksrc; // ATOM_PLL0 or ATOM_GCK_DFS or ATOM_FCH_CLK or ATOM_COMBOPHY_PLLx
uint8_t dceclkflag; // Bit [1:0] = PPLL ref clock source ( when ucDCEClkSrc= ATOM_PPLL0 )
uint8_t crtc_id; // ucDisp Pipe Id, ATOM_CRTC0/1/2/..., use only when ucDCEClkType = PIXCLK
};
//ucDCEClkType
enum atom_set_dce_clock_clock_type
{
DCE_CLOCK_TYPE_DISPCLK = 0,
DCE_CLOCK_TYPE_DPREFCLK = 1,
DCE_CLOCK_TYPE_PIXELCLK = 2, // used by VBIOS internally, called by SetPixelClock
};
//ucDCEClkFlag when ucDCEClkType == DPREFCLK
enum atom_set_dce_clock_dprefclk_flag
{
DCE_CLOCK_FLAG_PLL_REFCLK_SRC_MASK = 0x03,
DCE_CLOCK_FLAG_PLL_REFCLK_SRC_GENERICA = 0x00,
DCE_CLOCK_FLAG_PLL_REFCLK_SRC_GENLK = 0x01,
DCE_CLOCK_FLAG_PLL_REFCLK_SRC_PCIE = 0x02,
DCE_CLOCK_FLAG_PLL_REFCLK_SRC_XTALIN = 0x03,
};
//ucDCEClkFlag when ucDCEClkType == PIXCLK
enum atom_set_dce_clock_pixclk_flag
{
DCE_CLOCK_FLAG_PCLK_DEEPCOLOR_RATIO_MASK = 0x03,
DCE_CLOCK_FLAG_PCLK_DEEPCOLOR_RATIO_DIS = 0x00, //00 - DCCG_DEEP_COLOR_DTO_DISABLE: Disable Deep Color DTO
DCE_CLOCK_FLAG_PCLK_DEEPCOLOR_RATIO_5_4 = 0x01, //01 - DCCG_DEEP_COLOR_DTO_5_4_RATIO: Set Deep Color DTO to 5:4
DCE_CLOCK_FLAG_PCLK_DEEPCOLOR_RATIO_3_2 = 0x02, //02 - DCCG_DEEP_COLOR_DTO_3_2_RATIO: Set Deep Color DTO to 3:2
DCE_CLOCK_FLAG_PCLK_DEEPCOLOR_RATIO_2_1 = 0x03, //03 - DCCG_DEEP_COLOR_DTO_2_1_RATIO: Set Deep Color DTO to 2:1
DCE_CLOCK_FLAG_PIXCLK_YUV420_MODE = 0x04,
};
struct set_dce_clock_ps_allocation_v2_1
{
struct set_dce_clock_parameters_v2_1 param;
uint32_t ulReserved[2];
};
/****************************************************************************/
// Structures used by BlankCRTC
/****************************************************************************/
struct blank_crtc_parameters
{
uint8_t crtc_id; // enum atom_crtc_def
uint8_t blanking; // enum atom_blank_crtc_command
uint16_t reserved;
uint32_t reserved1;
};
enum atom_blank_crtc_command
{
ATOM_BLANKING = 1,
ATOM_BLANKING_OFF = 0,
};
/****************************************************************************/
// Structures used by enablecrtc
/****************************************************************************/
struct enable_crtc_parameters
{
uint8_t crtc_id; // enum atom_crtc_def
uint8_t enable; // ATOM_ENABLE or ATOM_DISABLE
uint8_t padding[2];
};
/****************************************************************************/
// Structure used by EnableDispPowerGating
/****************************************************************************/
struct enable_disp_power_gating_parameters_v2_1
{
uint8_t disp_pipe_id; // ATOM_CRTC1, ATOM_CRTC2, ...
uint8_t enable; // ATOM_ENABLE or ATOM_DISABLE
uint8_t padding[2];
};
struct enable_disp_power_gating_ps_allocation
{
struct enable_disp_power_gating_parameters_v2_1 param;
uint32_t ulReserved[4];
};
/****************************************************************************/
// Structure used in setcrtc_usingdtdtiming
/****************************************************************************/
struct set_crtc_using_dtd_timing_parameters
{
uint16_t h_size;
uint16_t h_blanking_time;
uint16_t v_size;
uint16_t v_blanking_time;
uint16_t h_syncoffset;
uint16_t h_syncwidth;
uint16_t v_syncoffset;
uint16_t v_syncwidth;
uint16_t modemiscinfo;
uint8_t h_border;
uint8_t v_border;
uint8_t crtc_id; // enum atom_crtc_def
uint8_t encoder_mode; // atom_encode_mode_def
uint8_t padding[2];
};
/****************************************************************************/
// Structures used by processi2cchanneltransaction
/****************************************************************************/
struct process_i2c_channel_transaction_parameters
{
uint8_t i2cspeed_khz;
union {
uint8_t regindex;
uint8_t status; /* enum atom_process_i2c_flag */
} regind_status;
uint16_t i2c_data_out;
uint8_t flag; /* enum atom_process_i2c_status */
uint8_t trans_bytes;
uint8_t slave_addr;
uint8_t i2c_id;
};
//ucFlag
enum atom_process_i2c_flag
{
HW_I2C_WRITE = 1,
HW_I2C_READ = 0,
I2C_2BYTE_ADDR = 0x02,
HW_I2C_SMBUS_BYTE_WR = 0x04,
};
//status
enum atom_process_i2c_status
{
HW_ASSISTED_I2C_STATUS_FAILURE =2,
HW_ASSISTED_I2C_STATUS_SUCCESS =1,
};
/****************************************************************************/
// Structures used by processauxchanneltransaction
/****************************************************************************/
struct process_aux_channel_transaction_parameters_v1_2
{
uint16_t aux_request;
uint16_t dataout;
uint8_t channelid;
union {
uint8_t reply_status;
uint8_t aux_delay;
} aux_status_delay;
uint8_t dataout_len;
uint8_t hpd_id; //=0: HPD1, =1: HPD2, =2: HPD3, =3: HPD4, =4: HPD5, =5: HPD6
};
/****************************************************************************/
// Structures used by selectcrtc_source
/****************************************************************************/
struct select_crtc_source_parameters_v2_3
{
uint8_t crtc_id; // enum atom_crtc_def
uint8_t encoder_id; // enum atom_dig_def
uint8_t encode_mode; // enum atom_encode_mode_def
uint8_t dst_bpc; // enum atom_panel_bit_per_color
};
/****************************************************************************/
// Structures used by digxencodercontrol
/****************************************************************************/
// ucAction:
enum atom_dig_encoder_control_action
{
ATOM_ENCODER_CMD_DISABLE_DIG = 0,
ATOM_ENCODER_CMD_ENABLE_DIG = 1,
ATOM_ENCODER_CMD_DP_LINK_TRAINING_START = 0x08,
ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN1 = 0x09,
ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN2 = 0x0a,
ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN3 = 0x13,
ATOM_ENCODER_CMD_DP_LINK_TRAINING_COMPLETE = 0x0b,
ATOM_ENCODER_CMD_DP_VIDEO_OFF = 0x0c,
ATOM_ENCODER_CMD_DP_VIDEO_ON = 0x0d,
ATOM_ENCODER_CMD_SETUP_PANEL_MODE = 0x10,
ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN4 = 0x14,
ATOM_ENCODER_CMD_STREAM_SETUP = 0x0F,
ATOM_ENCODER_CMD_LINK_SETUP = 0x11,
ATOM_ENCODER_CMD_ENCODER_BLANK = 0x12,
};
//define ucPanelMode
enum atom_dig_encoder_control_panelmode
{
DP_PANEL_MODE_DISABLE = 0x00,
DP_PANEL_MODE_ENABLE_eDP_MODE = 0x01,
DP_PANEL_MODE_ENABLE_LVLINK_MODE = 0x11,
};
//ucDigId
enum atom_dig_encoder_control_v5_digid
{
ATOM_ENCODER_CONFIG_V5_DIG0_ENCODER = 0x00,
ATOM_ENCODER_CONFIG_V5_DIG1_ENCODER = 0x01,
ATOM_ENCODER_CONFIG_V5_DIG2_ENCODER = 0x02,
ATOM_ENCODER_CONFIG_V5_DIG3_ENCODER = 0x03,
ATOM_ENCODER_CONFIG_V5_DIG4_ENCODER = 0x04,
ATOM_ENCODER_CONFIG_V5_DIG5_ENCODER = 0x05,
ATOM_ENCODER_CONFIG_V5_DIG6_ENCODER = 0x06,
ATOM_ENCODER_CONFIG_V5_DIG7_ENCODER = 0x07,
};
struct dig_encoder_stream_setup_parameters_v1_5
{
uint8_t digid; // 0~6 map to DIG0~DIG6 enum atom_dig_encoder_control_v5_digid
uint8_t action; // = ATOM_ENOCODER_CMD_STREAM_SETUP
uint8_t digmode; // ATOM_ENCODER_MODE_DP/ATOM_ENCODER_MODE_DVI/ATOM_ENCODER_MODE_HDMI
uint8_t lanenum; // Lane number
uint32_t pclk_10khz; // Pixel Clock in 10Khz
uint8_t bitpercolor;
uint8_t dplinkrate_270mhz;//= DP link rate/270Mhz, =6: 1.62G = 10: 2.7G, =20: 5.4Ghz, =30: 8.1Ghz etc
uint8_t reserved[2];
};
struct dig_encoder_link_setup_parameters_v1_5
{
uint8_t digid; // 0~6 map to DIG0~DIG6 enum atom_dig_encoder_control_v5_digid
uint8_t action; // = ATOM_ENOCODER_CMD_LINK_SETUP
uint8_t digmode; // ATOM_ENCODER_MODE_DP/ATOM_ENCODER_MODE_DVI/ATOM_ENCODER_MODE_HDMI
uint8_t lanenum; // Lane number
uint8_t symclk_10khz; // Symbol Clock in 10Khz
uint8_t hpd_sel;
uint8_t digfe_sel; // DIG stream( front-end ) selection, bit0 means DIG0 FE is enable,
uint8_t reserved[2];
};
struct dp_panel_mode_set_parameters_v1_5
{
uint8_t digid; // 0~6 map to DIG0~DIG6 enum atom_dig_encoder_control_v5_digid
uint8_t action; // = ATOM_ENCODER_CMD_DPLINK_SETUP
uint8_t panelmode; // enum atom_dig_encoder_control_panelmode
uint8_t reserved1;
uint32_t reserved2[2];
};
struct dig_encoder_generic_cmd_parameters_v1_5
{
uint8_t digid; // 0~6 map to DIG0~DIG6 enum atom_dig_encoder_control_v5_digid
uint8_t action; // = rest of generic encoder command which does not carry any parameters
uint8_t reserved1[2];
uint32_t reserved2[2];
};
union dig_encoder_control_parameters_v1_5
{
struct dig_encoder_generic_cmd_parameters_v1_5 cmd_param;
struct dig_encoder_stream_setup_parameters_v1_5 stream_param;
struct dig_encoder_link_setup_parameters_v1_5 link_param;
struct dp_panel_mode_set_parameters_v1_5 dppanel_param;
};
/*
***************************************************************************
Structures used by dig1transmittercontrol
***************************************************************************
*/
struct dig_transmitter_control_parameters_v1_6
{
uint8_t phyid; // 0=UNIPHYA, 1=UNIPHYB, 2=UNIPHYC, 3=UNIPHYD, 4= UNIPHYE 5=UNIPHYF
uint8_t action; // define as ATOM_TRANSMITER_ACTION_xxx
union {
uint8_t digmode; // enum atom_encode_mode_def
uint8_t dplaneset; // DP voltage swing and pre-emphasis value defined in DPCD DP_LANE_SET, "DP_LANE_SET__xDB_y_zV"
} mode_laneset;
uint8_t lanenum; // Lane number 1, 2, 4, 8
uint32_t symclk_10khz; // Symbol Clock in 10Khz
uint8_t hpdsel; // =1: HPD1, =2: HPD2, .... =6: HPD6, =0: HPD is not assigned
uint8_t digfe_sel; // DIG stream( front-end ) selection, bit0 means DIG0 FE is enable,
uint8_t connobj_id; // Connector Object Id defined in ObjectId.h
uint8_t reserved;
uint32_t reserved1;
};
struct dig_transmitter_control_ps_allocation_v1_6
{
struct dig_transmitter_control_parameters_v1_6 param;
uint32_t reserved[4];
};
//ucAction
enum atom_dig_transmitter_control_action
{
ATOM_TRANSMITTER_ACTION_DISABLE = 0,
ATOM_TRANSMITTER_ACTION_ENABLE = 1,
ATOM_TRANSMITTER_ACTION_LCD_BLOFF = 2,
ATOM_TRANSMITTER_ACTION_LCD_BLON = 3,
ATOM_TRANSMITTER_ACTION_BL_BRIGHTNESS_CONTROL = 4,
ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_START = 5,
ATOM_TRANSMITTER_ACTION_LCD_SELFTEST_STOP = 6,
ATOM_TRANSMITTER_ACTION_INIT = 7,
ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT = 8,
ATOM_TRANSMITTER_ACTION_ENABLE_OUTPUT = 9,
ATOM_TRANSMITTER_ACTION_SETUP = 10,
ATOM_TRANSMITTER_ACTION_SETUP_VSEMPH = 11,
ATOM_TRANSMITTER_ACTION_POWER_ON = 12,
ATOM_TRANSMITTER_ACTION_POWER_OFF = 13,
};
// digfe_sel
enum atom_dig_transmitter_control_digfe_sel
{
ATOM_TRANMSITTER_V6__DIGA_SEL = 0x01,
ATOM_TRANMSITTER_V6__DIGB_SEL = 0x02,
ATOM_TRANMSITTER_V6__DIGC_SEL = 0x04,
ATOM_TRANMSITTER_V6__DIGD_SEL = 0x08,
ATOM_TRANMSITTER_V6__DIGE_SEL = 0x10,
ATOM_TRANMSITTER_V6__DIGF_SEL = 0x20,
ATOM_TRANMSITTER_V6__DIGG_SEL = 0x40,
};
//ucHPDSel
enum atom_dig_transmitter_control_hpd_sel
{
ATOM_TRANSMITTER_V6_NO_HPD_SEL = 0x00,
ATOM_TRANSMITTER_V6_HPD1_SEL = 0x01,
ATOM_TRANSMITTER_V6_HPD2_SEL = 0x02,
ATOM_TRANSMITTER_V6_HPD3_SEL = 0x03,
ATOM_TRANSMITTER_V6_HPD4_SEL = 0x04,
ATOM_TRANSMITTER_V6_HPD5_SEL = 0x05,
ATOM_TRANSMITTER_V6_HPD6_SEL = 0x06,
};
// ucDPLaneSet
enum atom_dig_transmitter_control_dplaneset
{
DP_LANE_SET__0DB_0_4V = 0x00,
DP_LANE_SET__0DB_0_6V = 0x01,
DP_LANE_SET__0DB_0_8V = 0x02,
DP_LANE_SET__0DB_1_2V = 0x03,
DP_LANE_SET__3_5DB_0_4V = 0x08,
DP_LANE_SET__3_5DB_0_6V = 0x09,
DP_LANE_SET__3_5DB_0_8V = 0x0a,
DP_LANE_SET__6DB_0_4V = 0x10,
DP_LANE_SET__6DB_0_6V = 0x11,
DP_LANE_SET__9_5DB_0_4V = 0x18,
};
/****************************************************************************/
// Structures used by ExternalEncoderControl V2.4
/****************************************************************************/
struct external_encoder_control_parameters_v2_4
{
uint16_t pixelclock_10khz; // pixel clock in 10Khz, valid when ucAction=SETUP/ENABLE_OUTPUT
uint8_t config; // indicate which encoder, and DP link rate when ucAction = SETUP/ENABLE_OUTPUT
uint8_t action; //
uint8_t encodermode; // encoder mode, only used when ucAction = SETUP/ENABLE_OUTPUT
uint8_t lanenum; // lane number, only used when ucAction = SETUP/ENABLE_OUTPUT
uint8_t bitpercolor; // output bit per color, only valid when ucAction = SETUP/ENABLE_OUTPUT and ucEncodeMode= DP
uint8_t hpd_id;
};
// ucAction
enum external_encoder_control_action_def
{
EXTERNAL_ENCODER_ACTION_V3_DISABLE_OUTPUT = 0x00,
EXTERNAL_ENCODER_ACTION_V3_ENABLE_OUTPUT = 0x01,
EXTERNAL_ENCODER_ACTION_V3_ENCODER_INIT = 0x07,
EXTERNAL_ENCODER_ACTION_V3_ENCODER_SETUP = 0x0f,
EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING_OFF = 0x10,
EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING = 0x11,
EXTERNAL_ENCODER_ACTION_V3_DACLOAD_DETECTION = 0x12,
EXTERNAL_ENCODER_ACTION_V3_DDC_SETUP = 0x14,
};
// ucConfig
enum external_encoder_control_v2_4_config_def
{
EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_MASK = 0x03,
EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_1_62GHZ = 0x00,
EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_2_70GHZ = 0x01,
EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_5_40GHZ = 0x02,
EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_3_24GHZ = 0x03,
EXTERNAL_ENCODER_CONFIG_V3_ENCODER_SEL_MAKS = 0x70,
EXTERNAL_ENCODER_CONFIG_V3_ENCODER1 = 0x00,
EXTERNAL_ENCODER_CONFIG_V3_ENCODER2 = 0x10,
EXTERNAL_ENCODER_CONFIG_V3_ENCODER3 = 0x20,
};
struct external_encoder_control_ps_allocation_v2_4
{
struct external_encoder_control_parameters_v2_4 sExtEncoder;
uint32_t reserved[2];
};
/*
***************************************************************************
AMD ACPI Table
***************************************************************************
*/
struct amd_acpi_description_header{
uint32_t signature;
uint32_t tableLength; //Length
uint8_t revision;
uint8_t checksum;
uint8_t oemId[6];
uint8_t oemTableId[8]; //UINT64 OemTableId;
uint32_t oemRevision;
uint32_t creatorId;
uint32_t creatorRevision;
};
struct uefi_acpi_vfct{
struct amd_acpi_description_header sheader;
uint8_t tableUUID[16]; //0x24
uint32_t vbiosimageoffset; //0x34. Offset to the first GOP_VBIOS_CONTENT block from the beginning of the stucture.
uint32_t lib1Imageoffset; //0x38. Offset to the first GOP_LIB1_CONTENT block from the beginning of the stucture.
uint32_t reserved[4]; //0x3C
};
struct vfct_image_header{
uint32_t pcibus; //0x4C
uint32_t pcidevice; //0x50
uint32_t pcifunction; //0x54
uint16_t vendorid; //0x58
uint16_t deviceid; //0x5A
uint16_t ssvid; //0x5C
uint16_t ssid; //0x5E
uint32_t revision; //0x60
uint32_t imagelength; //0x64
};
struct gop_vbios_content {
struct vfct_image_header vbiosheader;
uint8_t vbioscontent[1];
};
struct gop_lib1_content {
struct vfct_image_header lib1header;
uint8_t lib1content[1];
};
/*
***************************************************************************
Scratch Register definitions
Each number below indicates which scratch regiser request, Active and
Connect all share the same definitions as display_device_tag defines
***************************************************************************
*/
enum scratch_register_def{
ATOM_DEVICE_CONNECT_INFO_DEF = 0,
ATOM_BL_BRI_LEVEL_INFO_DEF = 2,
ATOM_ACTIVE_INFO_DEF = 3,
ATOM_LCD_INFO_DEF = 4,
ATOM_DEVICE_REQ_INFO_DEF = 5,
ATOM_ACC_CHANGE_INFO_DEF = 6,
ATOM_PRE_OS_MODE_INFO_DEF = 7,
ATOM_PRE_OS_ASSERTION_DEF = 8, //For GOP to record a 32bit assertion code, this is enabled by default in prodution GOP drivers.
ATOM_INTERNAL_TIMER_INFO_DEF = 10,
};
enum scratch_device_connect_info_bit_def{
ATOM_DISPLAY_LCD1_CONNECT =0x0002,
ATOM_DISPLAY_DFP1_CONNECT =0x0008,
ATOM_DISPLAY_DFP2_CONNECT =0x0080,
ATOM_DISPLAY_DFP3_CONNECT =0x0200,
ATOM_DISPLAY_DFP4_CONNECT =0x0400,
ATOM_DISPLAY_DFP5_CONNECT =0x0800,
ATOM_DISPLAY_DFP6_CONNECT =0x0040,
ATOM_DISPLAY_DFPx_CONNECT =0x0ec8,
ATOM_CONNECT_INFO_DEVICE_MASK =0x0fff,
};
enum scratch_bl_bri_level_info_bit_def{
ATOM_CURRENT_BL_LEVEL_SHIFT =0x8,
#ifndef _H2INC
ATOM_CURRENT_BL_LEVEL_MASK =0x0000ff00,
ATOM_DEVICE_DPMS_STATE =0x00010000,
#endif
};
enum scratch_active_info_bits_def{
ATOM_DISPLAY_LCD1_ACTIVE =0x0002,
ATOM_DISPLAY_DFP1_ACTIVE =0x0008,
ATOM_DISPLAY_DFP2_ACTIVE =0x0080,
ATOM_DISPLAY_DFP3_ACTIVE =0x0200,
ATOM_DISPLAY_DFP4_ACTIVE =0x0400,
ATOM_DISPLAY_DFP5_ACTIVE =0x0800,
ATOM_DISPLAY_DFP6_ACTIVE =0x0040,
ATOM_ACTIVE_INFO_DEVICE_MASK =0x0fff,
};
enum scratch_device_req_info_bits_def{
ATOM_DISPLAY_LCD1_REQ =0x0002,
ATOM_DISPLAY_DFP1_REQ =0x0008,
ATOM_DISPLAY_DFP2_REQ =0x0080,
ATOM_DISPLAY_DFP3_REQ =0x0200,
ATOM_DISPLAY_DFP4_REQ =0x0400,
ATOM_DISPLAY_DFP5_REQ =0x0800,
ATOM_DISPLAY_DFP6_REQ =0x0040,
ATOM_REQ_INFO_DEVICE_MASK =0x0fff,
};
enum scratch_acc_change_info_bitshift_def{
ATOM_ACC_CHANGE_ACC_MODE_SHIFT =4,
ATOM_ACC_CHANGE_LID_STATUS_SHIFT =6,
};
enum scratch_acc_change_info_bits_def{
ATOM_ACC_CHANGE_ACC_MODE =0x00000010,
ATOM_ACC_CHANGE_LID_STATUS =0x00000040,
};
enum scratch_pre_os_mode_info_bits_def{
ATOM_PRE_OS_MODE_MASK =0x00000003,
ATOM_PRE_OS_MODE_VGA =0x00000000,
ATOM_PRE_OS_MODE_VESA =0x00000001,
ATOM_PRE_OS_MODE_GOP =0x00000002,
ATOM_PRE_OS_MODE_PIXEL_DEPTH =0x0000000C,
ATOM_PRE_OS_MODE_PIXEL_FORMAT_MASK=0x000000F0,
ATOM_PRE_OS_MODE_8BIT_PAL_EN =0x00000100,
ATOM_ASIC_INIT_COMPLETE =0x00000200,
#ifndef _H2INC
ATOM_PRE_OS_MODE_NUMBER_MASK =0xFFFF0000,
#endif
};
/*
***************************************************************************
ATOM firmware ID header file
!! Please keep it at end of the atomfirmware.h !!
***************************************************************************
*/
#include "atomfirmwareid.h"
#pragma pack()
#endif