blob: 502e7a3f8948b6564f56bf19b412fd6143f67e1c [file] [log] [blame]
/*
* Copyright (C) 2015, Marvell International Ltd.
*
* This software file (the "File") is distributed by Marvell International
* Ltd. under the terms of the GNU General Public License Version 2, June 1991
* (the "License"). You may use, redistribute and/or modify this File in
* accordance with the terms and conditions of the License, a copy of which
* is available on the worldwide web at
* http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
*
* THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
* IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
* ARE EXPRESSLY DISCLAIMED. The License provides additional details about
* this warranty disclaimer.
*/
/* Inspired (hugely) by HCI LDISC implementation in Bluetooth.
*
* Copyright (C) 2000-2001 Qualcomm Incorporated
* Copyright (C) 2002-2003 Maxim Krasnyansky <maxk@qualcomm.com>
* Copyright (C) 2004-2005 Marcel Holtmann <marcel@holtmann.org>
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/fcntl.h>
#include <linux/interrupt.h>
#include <linux/ptrace.h>
#include <linux/poll.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/signal.h>
#include <linux/ioctl.h>
#include <linux/skbuff.h>
#include <net/nfc/nci.h>
#include <net/nfc/nci_core.h>
/* TX states */
#define NCI_UART_SENDING 1
#define NCI_UART_TX_WAKEUP 2
static struct nci_uart *nci_uart_drivers[NCI_UART_DRIVER_MAX];
static inline struct sk_buff *nci_uart_dequeue(struct nci_uart *nu)
{
struct sk_buff *skb = nu->tx_skb;
if (!skb)
skb = skb_dequeue(&nu->tx_q);
else
nu->tx_skb = NULL;
return skb;
}
static inline int nci_uart_queue_empty(struct nci_uart *nu)
{
if (nu->tx_skb)
return 0;
return skb_queue_empty(&nu->tx_q);
}
static int nci_uart_tx_wakeup(struct nci_uart *nu)
{
if (test_and_set_bit(NCI_UART_SENDING, &nu->tx_state)) {
set_bit(NCI_UART_TX_WAKEUP, &nu->tx_state);
return 0;
}
schedule_work(&nu->write_work);
return 0;
}
static void nci_uart_write_work(struct work_struct *work)
{
struct nci_uart *nu = container_of(work, struct nci_uart, write_work);
struct tty_struct *tty = nu->tty;
struct sk_buff *skb;
restart:
clear_bit(NCI_UART_TX_WAKEUP, &nu->tx_state);
if (nu->ops.tx_start)
nu->ops.tx_start(nu);
while ((skb = nci_uart_dequeue(nu))) {
int len;
set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
len = tty->ops->write(tty, skb->data, skb->len);
skb_pull(skb, len);
if (skb->len) {
nu->tx_skb = skb;
break;
}
kfree_skb(skb);
}
if (test_bit(NCI_UART_TX_WAKEUP, &nu->tx_state))
goto restart;
if (nu->ops.tx_done && nci_uart_queue_empty(nu))
nu->ops.tx_done(nu);
clear_bit(NCI_UART_SENDING, &nu->tx_state);
}
static int nci_uart_set_driver(struct tty_struct *tty, unsigned int driver)
{
struct nci_uart *nu = NULL;
int ret;
if (driver >= NCI_UART_DRIVER_MAX)
return -EINVAL;
if (!nci_uart_drivers[driver])
return -ENOENT;
nu = kzalloc(sizeof(*nu), GFP_KERNEL);
if (!nu)
return -ENOMEM;
memcpy(nu, nci_uart_drivers[driver], sizeof(struct nci_uart));
nu->tty = tty;
tty->disc_data = nu;
skb_queue_head_init(&nu->tx_q);
INIT_WORK(&nu->write_work, nci_uart_write_work);
spin_lock_init(&nu->rx_lock);
ret = nu->ops.open(nu);
if (ret) {
tty->disc_data = NULL;
kfree(nu);
} else if (!try_module_get(nu->owner)) {
nu->ops.close(nu);
tty->disc_data = NULL;
kfree(nu);
return -ENOENT;
}
return ret;
}
/* ------ LDISC part ------ */
/* nci_uart_tty_open
*
* Called when line discipline changed to NCI_UART.
*
* Arguments:
* tty pointer to tty info structure
* Return Value:
* 0 if success, otherwise error code
*/
static int nci_uart_tty_open(struct tty_struct *tty)
{
/* Error if the tty has no write op instead of leaving an exploitable
* hole
*/
if (!tty->ops->write)
return -EOPNOTSUPP;
tty->disc_data = NULL;
tty->receive_room = 65536;
/* Flush any pending characters in the driver */
tty_driver_flush_buffer(tty);
return 0;
}
/* nci_uart_tty_close()
*
* Called when the line discipline is changed to something
* else, the tty is closed, or the tty detects a hangup.
*/
static void nci_uart_tty_close(struct tty_struct *tty)
{
struct nci_uart *nu = (void *)tty->disc_data;
/* Detach from the tty */
tty->disc_data = NULL;
if (!nu)
return;
kfree_skb(nu->tx_skb);
kfree_skb(nu->rx_skb);
skb_queue_purge(&nu->tx_q);
nu->ops.close(nu);
nu->tty = NULL;
module_put(nu->owner);
cancel_work_sync(&nu->write_work);
kfree(nu);
}
/* nci_uart_tty_wakeup()
*
* Callback for transmit wakeup. Called when low level
* device driver can accept more send data.
*
* Arguments: tty pointer to associated tty instance data
* Return Value: None
*/
static void nci_uart_tty_wakeup(struct tty_struct *tty)
{
struct nci_uart *nu = (void *)tty->disc_data;
if (!nu)
return;
clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
if (tty != nu->tty)
return;
nci_uart_tx_wakeup(nu);
}
/* -- Default recv_buf handler --
*
* This handler supposes that NCI frames are sent over UART link without any
* framing. It reads NCI header, retrieve the packet size and once all packet
* bytes are received it passes it to nci_uart driver for processing.
*/
static int nci_uart_default_recv_buf(struct nci_uart *nu, const u8 *data,
int count)
{
int chunk_len;
if (!nu->ndev) {
nfc_err(nu->tty->dev,
"receive data from tty but no NCI dev is attached yet, drop buffer\n");
return 0;
}
/* Decode all incoming data in packets
* and enqueue then for processing.
*/
while (count > 0) {
/* If this is the first data of a packet, allocate a buffer */
if (!nu->rx_skb) {
nu->rx_packet_len = -1;
nu->rx_skb = nci_skb_alloc(nu->ndev,
NCI_MAX_PACKET_SIZE,
GFP_ATOMIC);
if (!nu->rx_skb)
return -ENOMEM;
}
/* Eat byte after byte till full packet header is received */
if (nu->rx_skb->len < NCI_CTRL_HDR_SIZE) {
skb_put_u8(nu->rx_skb, *data++);
--count;
continue;
}
/* Header was received but packet len was not read */
if (nu->rx_packet_len < 0)
nu->rx_packet_len = NCI_CTRL_HDR_SIZE +
nci_plen(nu->rx_skb->data);
/* Compute how many bytes are missing and how many bytes can
* be consumed.
*/
chunk_len = nu->rx_packet_len - nu->rx_skb->len;
if (count < chunk_len)
chunk_len = count;
skb_put_data(nu->rx_skb, data, chunk_len);
data += chunk_len;
count -= chunk_len;
/* Check if packet is fully received */
if (nu->rx_packet_len == nu->rx_skb->len) {
/* Pass RX packet to driver */
if (nu->ops.recv(nu, nu->rx_skb) != 0)
nfc_err(nu->tty->dev, "corrupted RX packet\n");
/* Next packet will be a new one */
nu->rx_skb = NULL;
}
}
return 0;
}
/* nci_uart_tty_receive()
*
* Called by tty low level driver when receive data is
* available.
*
* Arguments: tty pointer to tty instance data
* data pointer to received data
* flags pointer to flags for data
* count count of received data in bytes
*
* Return Value: None
*/
static void nci_uart_tty_receive(struct tty_struct *tty, const u8 *data,
const char *flags, int count)
{
struct nci_uart *nu = (void *)tty->disc_data;
if (!nu || tty != nu->tty)
return;
spin_lock(&nu->rx_lock);
nci_uart_default_recv_buf(nu, data, count);
spin_unlock(&nu->rx_lock);
tty_unthrottle(tty);
}
/* nci_uart_tty_ioctl()
*
* Process IOCTL system call for the tty device.
*
* Arguments:
*
* tty pointer to tty instance data
* file pointer to open file object for device
* cmd IOCTL command code
* arg argument for IOCTL call (cmd dependent)
*
* Return Value: Command dependent
*/
static int nci_uart_tty_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct nci_uart *nu = (void *)tty->disc_data;
int err = 0;
switch (cmd) {
case NCIUARTSETDRIVER:
if (!nu)
return nci_uart_set_driver(tty, (unsigned int)arg);
else
return -EBUSY;
break;
default:
err = n_tty_ioctl_helper(tty, file, cmd, arg);
break;
}
return err;
}
/* We don't provide read/write/poll interface for user space. */
static ssize_t nci_uart_tty_read(struct tty_struct *tty, struct file *file,
unsigned char *buf, size_t nr,
void **cookie, unsigned long offset)
{
return 0;
}
static ssize_t nci_uart_tty_write(struct tty_struct *tty, struct file *file,
const unsigned char *data, size_t count)
{
return 0;
}
static __poll_t nci_uart_tty_poll(struct tty_struct *tty,
struct file *filp, poll_table *wait)
{
return 0;
}
static int nci_uart_send(struct nci_uart *nu, struct sk_buff *skb)
{
/* Queue TX packet */
skb_queue_tail(&nu->tx_q, skb);
/* Try to start TX (if possible) */
nci_uart_tx_wakeup(nu);
return 0;
}
int nci_uart_register(struct nci_uart *nu)
{
if (!nu || !nu->ops.open ||
!nu->ops.recv || !nu->ops.close)
return -EINVAL;
/* Set the send callback */
nu->ops.send = nci_uart_send;
/* Add this driver in the driver list */
if (nci_uart_drivers[nu->driver]) {
pr_err("driver %d is already registered\n", nu->driver);
return -EBUSY;
}
nci_uart_drivers[nu->driver] = nu;
pr_info("NCI uart driver '%s [%d]' registered\n", nu->name, nu->driver);
return 0;
}
EXPORT_SYMBOL_GPL(nci_uart_register);
void nci_uart_unregister(struct nci_uart *nu)
{
pr_info("NCI uart driver '%s [%d]' unregistered\n", nu->name,
nu->driver);
/* Remove this driver from the driver list */
nci_uart_drivers[nu->driver] = NULL;
}
EXPORT_SYMBOL_GPL(nci_uart_unregister);
void nci_uart_set_config(struct nci_uart *nu, int baudrate, int flow_ctrl)
{
struct ktermios new_termios;
if (!nu->tty)
return;
down_read(&nu->tty->termios_rwsem);
new_termios = nu->tty->termios;
up_read(&nu->tty->termios_rwsem);
tty_termios_encode_baud_rate(&new_termios, baudrate, baudrate);
if (flow_ctrl)
new_termios.c_cflag |= CRTSCTS;
else
new_termios.c_cflag &= ~CRTSCTS;
tty_set_termios(nu->tty, &new_termios);
}
EXPORT_SYMBOL_GPL(nci_uart_set_config);
static struct tty_ldisc_ops nci_uart_ldisc = {
.owner = THIS_MODULE,
.num = N_NCI,
.name = "n_nci",
.open = nci_uart_tty_open,
.close = nci_uart_tty_close,
.read = nci_uart_tty_read,
.write = nci_uart_tty_write,
.poll = nci_uart_tty_poll,
.receive_buf = nci_uart_tty_receive,
.write_wakeup = nci_uart_tty_wakeup,
.ioctl = nci_uart_tty_ioctl,
.compat_ioctl = nci_uart_tty_ioctl,
};
static int __init nci_uart_init(void)
{
return tty_register_ldisc(&nci_uart_ldisc);
}
static void __exit nci_uart_exit(void)
{
tty_unregister_ldisc(&nci_uart_ldisc);
}
module_init(nci_uart_init);
module_exit(nci_uart_exit);
MODULE_AUTHOR("Marvell International Ltd.");
MODULE_DESCRIPTION("NFC NCI UART driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS_LDISC(N_NCI);