| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * DSI interface to the Samsung S6E63M0 panel. |
| * (C) 2019 Linus Walleij |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/mod_devicetable.h> |
| |
| #include <drm/drm_mipi_dsi.h> |
| #include <drm/drm_print.h> |
| |
| #include "panel-samsung-s6e63m0.h" |
| |
| #define MCS_GLOBAL_PARAM 0xb0 |
| #define S6E63M0_DSI_MAX_CHUNK 15 /* CMD + 15 bytes max */ |
| |
| static int s6e63m0_dsi_dcs_read(struct device *dev, void *trsp, |
| const u8 cmd, u8 *data) |
| { |
| struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev); |
| int ret; |
| |
| ret = mipi_dsi_dcs_read(dsi, cmd, data, 1); |
| if (ret < 0) { |
| dev_err(dev, "could not read DCS CMD %02x\n", cmd); |
| return ret; |
| } |
| |
| dev_dbg(dev, "DSI read CMD %02x = %02x\n", cmd, *data); |
| |
| return 0; |
| } |
| |
| static int s6e63m0_dsi_dcs_write(struct device *dev, void *trsp, |
| const u8 *data, size_t len) |
| { |
| struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev); |
| const u8 *seqp = data; |
| u8 cmd; |
| u8 cmdwritten; |
| int remain; |
| int chunk; |
| int ret; |
| |
| dev_dbg(dev, "DSI writing dcs seq: %*ph\n", (int)len, data); |
| |
| /* Pick out and skip past the DCS command */ |
| cmd = *seqp; |
| seqp++; |
| cmdwritten = 0; |
| remain = len - 1; |
| chunk = remain; |
| |
| /* Send max S6E63M0_DSI_MAX_CHUNK bytes at a time */ |
| if (chunk > S6E63M0_DSI_MAX_CHUNK) |
| chunk = S6E63M0_DSI_MAX_CHUNK; |
| ret = mipi_dsi_dcs_write(dsi, cmd, seqp, chunk); |
| if (ret < 0) { |
| dev_err(dev, "error sending DCS command seq cmd %02x\n", cmd); |
| return ret; |
| } |
| cmdwritten += chunk; |
| seqp += chunk; |
| |
| while (cmdwritten < remain) { |
| chunk = remain - cmdwritten; |
| if (chunk > S6E63M0_DSI_MAX_CHUNK) |
| chunk = S6E63M0_DSI_MAX_CHUNK; |
| ret = mipi_dsi_dcs_write(dsi, MCS_GLOBAL_PARAM, &cmdwritten, 1); |
| if (ret < 0) { |
| dev_err(dev, "error sending CMD %02x global param %02x\n", |
| cmd, cmdwritten); |
| return ret; |
| } |
| ret = mipi_dsi_dcs_write(dsi, cmd, seqp, chunk); |
| if (ret < 0) { |
| dev_err(dev, "error sending CMD %02x chunk\n", cmd); |
| return ret; |
| } |
| cmdwritten += chunk; |
| seqp += chunk; |
| } |
| dev_dbg(dev, "sent command %02x %02x bytes\n", cmd, cmdwritten); |
| |
| usleep_range(8000, 9000); |
| |
| return 0; |
| } |
| |
| static int s6e63m0_dsi_probe(struct mipi_dsi_device *dsi) |
| { |
| struct device *dev = &dsi->dev; |
| int ret; |
| |
| dsi->lanes = 2; |
| dsi->format = MIPI_DSI_FMT_RGB888; |
| dsi->hs_rate = 349440000; |
| dsi->lp_rate = 9600000; |
| dsi->mode_flags = MIPI_DSI_MODE_VIDEO | |
| MIPI_DSI_MODE_VIDEO_BURST; |
| |
| ret = s6e63m0_probe(dev, NULL, s6e63m0_dsi_dcs_read, |
| s6e63m0_dsi_dcs_write, true); |
| if (ret) |
| return ret; |
| |
| ret = mipi_dsi_attach(dsi); |
| if (ret < 0) |
| s6e63m0_remove(dev); |
| |
| return ret; |
| } |
| |
| static void s6e63m0_dsi_remove(struct mipi_dsi_device *dsi) |
| { |
| mipi_dsi_detach(dsi); |
| s6e63m0_remove(&dsi->dev); |
| } |
| |
| static const struct of_device_id s6e63m0_dsi_of_match[] = { |
| { .compatible = "samsung,s6e63m0" }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, s6e63m0_dsi_of_match); |
| |
| static struct mipi_dsi_driver s6e63m0_dsi_driver = { |
| .probe = s6e63m0_dsi_probe, |
| .remove = s6e63m0_dsi_remove, |
| .driver = { |
| .name = "panel-samsung-s6e63m0", |
| .of_match_table = s6e63m0_dsi_of_match, |
| }, |
| }; |
| module_mipi_dsi_driver(s6e63m0_dsi_driver); |
| |
| MODULE_AUTHOR("Linus Walleij <linusw@kernel.org>"); |
| MODULE_DESCRIPTION("s6e63m0 LCD DSI Driver"); |
| MODULE_LICENSE("GPL v2"); |