| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Poweroff & reset driver for Actions Semi ATC260x PMICs |
| * |
| * Copyright (c) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com> |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/mfd/atc260x/core.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/power_supply.h> |
| #include <linux/reboot.h> |
| #include <linux/regmap.h> |
| |
| struct atc260x_pwrc { |
| struct device *dev; |
| struct regmap *regmap; |
| struct notifier_block restart_nb; |
| int (*do_poweroff)(const struct atc260x_pwrc *pwrc, bool restart); |
| }; |
| |
| /* Global variable needed only for pm_power_off */ |
| static struct atc260x_pwrc *atc260x_pwrc_data; |
| |
| static int atc2603c_do_poweroff(const struct atc260x_pwrc *pwrc, bool restart) |
| { |
| int ret, deep_sleep = 0; |
| uint reg_mask, reg_val; |
| |
| /* S4-Deep Sleep Mode is NOT available for WALL/USB power */ |
| if (!restart && !power_supply_is_system_supplied()) { |
| deep_sleep = 1; |
| dev_info(pwrc->dev, "Enabling S4-Deep Sleep Mode"); |
| } |
| |
| /* Update wakeup sources */ |
| reg_val = ATC2603C_PMU_SYS_CTL0_ONOFF_LONG_WK_EN | |
| (restart ? ATC2603C_PMU_SYS_CTL0_RESET_WK_EN |
| : ATC2603C_PMU_SYS_CTL0_ONOFF_SHORT_WK_EN); |
| |
| ret = regmap_update_bits(pwrc->regmap, ATC2603C_PMU_SYS_CTL0, |
| ATC2603C_PMU_SYS_CTL0_WK_ALL, reg_val); |
| if (ret) |
| dev_warn(pwrc->dev, "failed to write SYS_CTL0: %d\n", ret); |
| |
| /* Update power mode */ |
| reg_mask = ATC2603C_PMU_SYS_CTL3_EN_S2 | ATC2603C_PMU_SYS_CTL3_EN_S3; |
| |
| ret = regmap_update_bits(pwrc->regmap, ATC2603C_PMU_SYS_CTL3, reg_mask, |
| deep_sleep ? 0 : ATC2603C_PMU_SYS_CTL3_EN_S3); |
| if (ret) { |
| dev_err(pwrc->dev, "failed to write SYS_CTL3: %d\n", ret); |
| return ret; |
| } |
| |
| /* Trigger poweroff / restart sequence */ |
| reg_mask = restart ? ATC2603C_PMU_SYS_CTL0_RESTART_EN |
| : ATC2603C_PMU_SYS_CTL1_EN_S1; |
| reg_val = restart ? ATC2603C_PMU_SYS_CTL0_RESTART_EN : 0; |
| |
| ret = regmap_update_bits(pwrc->regmap, |
| restart ? ATC2603C_PMU_SYS_CTL0 : ATC2603C_PMU_SYS_CTL1, |
| reg_mask, reg_val); |
| if (ret) { |
| dev_err(pwrc->dev, "failed to write SYS_CTL%d: %d\n", |
| restart ? 0 : 1, ret); |
| return ret; |
| } |
| |
| /* Wait for trigger completion */ |
| mdelay(200); |
| |
| return 0; |
| } |
| |
| static int atc2609a_do_poweroff(const struct atc260x_pwrc *pwrc, bool restart) |
| { |
| int ret, deep_sleep = 0; |
| uint reg_mask, reg_val; |
| |
| /* S4-Deep Sleep Mode is NOT available for WALL/USB power */ |
| if (!restart && !power_supply_is_system_supplied()) { |
| deep_sleep = 1; |
| dev_info(pwrc->dev, "Enabling S4-Deep Sleep Mode"); |
| } |
| |
| /* Update wakeup sources */ |
| reg_val = ATC2609A_PMU_SYS_CTL0_ONOFF_LONG_WK_EN | |
| (restart ? ATC2609A_PMU_SYS_CTL0_RESET_WK_EN |
| : ATC2609A_PMU_SYS_CTL0_ONOFF_SHORT_WK_EN); |
| |
| ret = regmap_update_bits(pwrc->regmap, ATC2609A_PMU_SYS_CTL0, |
| ATC2609A_PMU_SYS_CTL0_WK_ALL, reg_val); |
| if (ret) |
| dev_warn(pwrc->dev, "failed to write SYS_CTL0: %d\n", ret); |
| |
| /* Update power mode */ |
| reg_mask = ATC2609A_PMU_SYS_CTL3_EN_S2 | ATC2609A_PMU_SYS_CTL3_EN_S3; |
| |
| ret = regmap_update_bits(pwrc->regmap, ATC2609A_PMU_SYS_CTL3, reg_mask, |
| deep_sleep ? 0 : ATC2609A_PMU_SYS_CTL3_EN_S3); |
| if (ret) { |
| dev_err(pwrc->dev, "failed to write SYS_CTL3: %d\n", ret); |
| return ret; |
| } |
| |
| /* Trigger poweroff / restart sequence */ |
| reg_mask = restart ? ATC2609A_PMU_SYS_CTL0_RESTART_EN |
| : ATC2609A_PMU_SYS_CTL1_EN_S1; |
| reg_val = restart ? ATC2609A_PMU_SYS_CTL0_RESTART_EN : 0; |
| |
| ret = regmap_update_bits(pwrc->regmap, |
| restart ? ATC2609A_PMU_SYS_CTL0 : ATC2609A_PMU_SYS_CTL1, |
| reg_mask, reg_val); |
| if (ret) { |
| dev_err(pwrc->dev, "failed to write SYS_CTL%d: %d\n", |
| restart ? 0 : 1, ret); |
| return ret; |
| } |
| |
| /* Wait for trigger completion */ |
| mdelay(200); |
| |
| return 0; |
| } |
| |
| static int atc2603c_init(const struct atc260x_pwrc *pwrc) |
| { |
| int ret; |
| |
| /* |
| * Delay transition from S2/S3 to S1 in order to avoid |
| * DDR init failure in Bootloader. |
| */ |
| ret = regmap_update_bits(pwrc->regmap, ATC2603C_PMU_SYS_CTL3, |
| ATC2603C_PMU_SYS_CTL3_S2S3TOS1_TIMER_EN, |
| ATC2603C_PMU_SYS_CTL3_S2S3TOS1_TIMER_EN); |
| if (ret) |
| dev_warn(pwrc->dev, "failed to write SYS_CTL3: %d\n", ret); |
| |
| /* Set wakeup sources */ |
| ret = regmap_update_bits(pwrc->regmap, ATC2603C_PMU_SYS_CTL0, |
| ATC2603C_PMU_SYS_CTL0_WK_ALL, |
| ATC2603C_PMU_SYS_CTL0_HDSW_WK_EN | |
| ATC2603C_PMU_SYS_CTL0_ONOFF_LONG_WK_EN); |
| if (ret) |
| dev_warn(pwrc->dev, "failed to write SYS_CTL0: %d\n", ret); |
| |
| return ret; |
| } |
| |
| static int atc2609a_init(const struct atc260x_pwrc *pwrc) |
| { |
| int ret; |
| |
| /* Set wakeup sources */ |
| ret = regmap_update_bits(pwrc->regmap, ATC2609A_PMU_SYS_CTL0, |
| ATC2609A_PMU_SYS_CTL0_WK_ALL, |
| ATC2609A_PMU_SYS_CTL0_HDSW_WK_EN | |
| ATC2609A_PMU_SYS_CTL0_ONOFF_LONG_WK_EN); |
| if (ret) |
| dev_warn(pwrc->dev, "failed to write SYS_CTL0: %d\n", ret); |
| |
| return ret; |
| } |
| |
| static void atc260x_pwrc_pm_handler(void) |
| { |
| atc260x_pwrc_data->do_poweroff(atc260x_pwrc_data, false); |
| |
| WARN_ONCE(1, "Unable to power off system\n"); |
| } |
| |
| static int atc260x_pwrc_restart_handler(struct notifier_block *nb, |
| unsigned long mode, void *cmd) |
| { |
| struct atc260x_pwrc *pwrc = container_of(nb, struct atc260x_pwrc, |
| restart_nb); |
| pwrc->do_poweroff(pwrc, true); |
| |
| return NOTIFY_DONE; |
| } |
| |
| static int atc260x_pwrc_probe(struct platform_device *pdev) |
| { |
| struct atc260x *atc260x = dev_get_drvdata(pdev->dev.parent); |
| struct atc260x_pwrc *priv; |
| int ret; |
| |
| priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->dev = &pdev->dev; |
| priv->regmap = atc260x->regmap; |
| priv->restart_nb.notifier_call = atc260x_pwrc_restart_handler; |
| priv->restart_nb.priority = 192; |
| |
| switch (atc260x->ic_type) { |
| case ATC2603C: |
| priv->do_poweroff = atc2603c_do_poweroff; |
| ret = atc2603c_init(priv); |
| break; |
| case ATC2609A: |
| priv->do_poweroff = atc2609a_do_poweroff; |
| ret = atc2609a_init(priv); |
| break; |
| default: |
| dev_err(priv->dev, |
| "Poweroff not supported for ATC260x PMIC type: %u\n", |
| atc260x->ic_type); |
| return -EINVAL; |
| } |
| |
| if (ret) |
| return ret; |
| |
| platform_set_drvdata(pdev, priv); |
| |
| if (!pm_power_off) { |
| atc260x_pwrc_data = priv; |
| pm_power_off = atc260x_pwrc_pm_handler; |
| } else { |
| dev_warn(priv->dev, "Poweroff callback already assigned\n"); |
| } |
| |
| ret = register_restart_handler(&priv->restart_nb); |
| if (ret) |
| dev_err(priv->dev, "failed to register restart handler: %d\n", |
| ret); |
| |
| return ret; |
| } |
| |
| static void atc260x_pwrc_remove(struct platform_device *pdev) |
| { |
| struct atc260x_pwrc *priv = platform_get_drvdata(pdev); |
| |
| if (atc260x_pwrc_data == priv) { |
| pm_power_off = NULL; |
| atc260x_pwrc_data = NULL; |
| } |
| |
| unregister_restart_handler(&priv->restart_nb); |
| } |
| |
| static struct platform_driver atc260x_pwrc_driver = { |
| .probe = atc260x_pwrc_probe, |
| .remove_new = atc260x_pwrc_remove, |
| .driver = { |
| .name = "atc260x-pwrc", |
| }, |
| }; |
| |
| module_platform_driver(atc260x_pwrc_driver); |
| |
| MODULE_DESCRIPTION("Poweroff & reset driver for ATC260x PMICs"); |
| MODULE_AUTHOR("Cristian Ciocaltea <cristian.ciocaltea@gmail.com>"); |
| MODULE_LICENSE("GPL"); |