| # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/leds/allwinner,sun50i-a100-ledc.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Allwinner A100 LED Controller |
| |
| maintainers: |
| - Samuel Holland <samuel@sholland.org> |
| |
| description: |
| The LED controller found in Allwinner sunxi SoCs uses a one-wire serial |
| interface to drive up to 1024 RGB LEDs. |
| |
| properties: |
| compatible: |
| oneOf: |
| - const: allwinner,sun50i-a100-ledc |
| - items: |
| - enum: |
| - allwinner,sun20i-d1-ledc |
| - allwinner,sun50i-r329-ledc |
| - const: allwinner,sun50i-a100-ledc |
| |
| reg: |
| maxItems: 1 |
| |
| "#address-cells": |
| const: 1 |
| |
| "#size-cells": |
| const: 0 |
| |
| interrupts: |
| maxItems: 1 |
| |
| clocks: |
| items: |
| - description: Bus clock |
| - description: Module clock |
| |
| clock-names: |
| items: |
| - const: bus |
| - const: mod |
| |
| resets: |
| maxItems: 1 |
| |
| dmas: |
| maxItems: 1 |
| description: TX DMA channel |
| |
| dma-names: |
| const: tx |
| |
| allwinner,pixel-format: |
| description: Pixel format (subpixel transmission order), default is "grb" |
| enum: |
| - bgr |
| - brg |
| - gbr |
| - grb |
| - rbg |
| - rgb |
| |
| allwinner,t0h-ns: |
| default: 336 |
| description: Length of high pulse when transmitting a "0" bit |
| |
| allwinner,t0l-ns: |
| default: 840 |
| description: Length of low pulse when transmitting a "0" bit |
| |
| allwinner,t1h-ns: |
| default: 882 |
| description: Length of high pulse when transmitting a "1" bit |
| |
| allwinner,t1l-ns: |
| default: 294 |
| description: Length of low pulse when transmitting a "1" bit |
| |
| allwinner,treset-ns: |
| default: 300000 |
| description: Minimum delay between transmission frames |
| |
| patternProperties: |
| "^multi-led@[0-9a-f]+$": |
| type: object |
| $ref: leds-class-multicolor.yaml# |
| unevaluatedProperties: false |
| properties: |
| reg: |
| minimum: 0 |
| maximum: 1023 |
| description: Index of the LED in the series (must be contiguous) |
| |
| required: |
| - reg |
| |
| required: |
| - compatible |
| - reg |
| - interrupts |
| - clocks |
| - clock-names |
| - resets |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/leds/common.h> |
| |
| ledc: led-controller@2008000 { |
| compatible = "allwinner,sun20i-d1-ledc", |
| "allwinner,sun50i-a100-ledc"; |
| reg = <0x2008000 0x400>; |
| interrupts = <36 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ccu 12>, <&ccu 34>; |
| clock-names = "bus", "mod"; |
| resets = <&ccu 12>; |
| dmas = <&dma 42>; |
| dma-names = "tx"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| multi-led@0 { |
| reg = <0x0>; |
| color = <LED_COLOR_ID_RGB>; |
| function = LED_FUNCTION_INDICATOR; |
| }; |
| }; |
| |
| ... |