| /* |
| * Copyright 2012 Red Hat Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the |
| * "Software"), to deal in the Software without restriction, including |
| * without limitation the rights to use, copy, modify, merge, publish, |
| * distribute, sub license, and/or sell copies of the Software, and to |
| * permit persons to whom the Software is furnished to do so, subject to |
| * the following conditions: |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, |
| * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR |
| * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE |
| * USE OR OTHER DEALINGS IN THE SOFTWARE. |
| * |
| * The above copyright notice and this permission notice (including the |
| * next paragraph) shall be included in all copies or substantial portions |
| * of the Software. |
| * |
| */ |
| /* |
| * Authors: Dave Airlie <airlied@redhat.com> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| |
| #include <drm/drm_aperture.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_drv.h> |
| #include <drm/drm_fbdev_generic.h> |
| #include <drm/drm_gem_shmem_helper.h> |
| #include <drm/drm_module.h> |
| #include <drm/drm_probe_helper.h> |
| |
| #include "ast_drv.h" |
| |
| static int ast_modeset = -1; |
| |
| MODULE_PARM_DESC(modeset, "Disable/Enable modesetting"); |
| module_param_named(modeset, ast_modeset, int, 0400); |
| |
| /* |
| * DRM driver |
| */ |
| |
| DEFINE_DRM_GEM_FOPS(ast_fops); |
| |
| static const struct drm_driver ast_driver = { |
| .driver_features = DRIVER_ATOMIC | |
| DRIVER_GEM | |
| DRIVER_MODESET, |
| |
| .fops = &ast_fops, |
| .name = DRIVER_NAME, |
| .desc = DRIVER_DESC, |
| .date = DRIVER_DATE, |
| .major = DRIVER_MAJOR, |
| .minor = DRIVER_MINOR, |
| .patchlevel = DRIVER_PATCHLEVEL, |
| |
| DRM_GEM_SHMEM_DRIVER_OPS |
| }; |
| |
| /* |
| * PCI driver |
| */ |
| |
| #define PCI_VENDOR_ASPEED 0x1a03 |
| |
| #define AST_VGA_DEVICE(id, info) { \ |
| .class = PCI_BASE_CLASS_DISPLAY << 16, \ |
| .class_mask = 0xff0000, \ |
| .vendor = PCI_VENDOR_ASPEED, \ |
| .device = id, \ |
| .subvendor = PCI_ANY_ID, \ |
| .subdevice = PCI_ANY_ID, \ |
| .driver_data = (unsigned long) info } |
| |
| static const struct pci_device_id ast_pciidlist[] = { |
| AST_VGA_DEVICE(PCI_CHIP_AST2000, NULL), |
| AST_VGA_DEVICE(PCI_CHIP_AST2100, NULL), |
| {0, 0, 0}, |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, ast_pciidlist); |
| |
| static bool ast_is_vga_enabled(void __iomem *ioregs) |
| { |
| u8 vgaer = __ast_read8(ioregs, AST_IO_VGAER); |
| |
| return vgaer & AST_IO_VGAER_VGA_ENABLE; |
| } |
| |
| static void ast_enable_vga(void __iomem *ioregs) |
| { |
| __ast_write8(ioregs, AST_IO_VGAER, AST_IO_VGAER_VGA_ENABLE); |
| __ast_write8(ioregs, AST_IO_VGAMR_W, AST_IO_VGAMR_IOSEL); |
| } |
| |
| /* |
| * Run this function as part of the HW device cleanup; not |
| * when the DRM device gets released. |
| */ |
| static void ast_enable_mmio_release(void *data) |
| { |
| void __iomem *ioregs = (void __force __iomem *)data; |
| |
| /* enable standard VGA decode */ |
| __ast_write8_i(ioregs, AST_IO_VGACRI, 0xa1, AST_IO_VGACRA1_MMIO_ENABLED); |
| } |
| |
| static int ast_enable_mmio(struct device *dev, void __iomem *ioregs) |
| { |
| void *data = (void __force *)ioregs; |
| |
| __ast_write8_i(ioregs, AST_IO_VGACRI, 0xa1, |
| AST_IO_VGACRA1_MMIO_ENABLED | |
| AST_IO_VGACRA1_VGAIO_DISABLED); |
| |
| return devm_add_action_or_reset(dev, ast_enable_mmio_release, data); |
| } |
| |
| static void ast_open_key(void __iomem *ioregs) |
| { |
| __ast_write8_i(ioregs, AST_IO_VGACRI, 0x80, AST_IO_VGACR80_PASSWORD); |
| } |
| |
| static int ast_detect_chip(struct pci_dev *pdev, |
| void __iomem *regs, void __iomem *ioregs, |
| enum ast_chip *chip_out, |
| enum ast_config_mode *config_mode_out) |
| { |
| struct device *dev = &pdev->dev; |
| struct device_node *np = dev->of_node; |
| enum ast_config_mode config_mode = ast_use_defaults; |
| uint32_t scu_rev = 0xffffffff; |
| enum ast_chip chip; |
| u32 data; |
| u8 vgacrd0, vgacrd1; |
| |
| /* |
| * Find configuration mode and read SCU revision |
| */ |
| |
| /* Check if we have device-tree properties */ |
| if (np && !of_property_read_u32(np, "aspeed,scu-revision-id", &data)) { |
| /* We do, disable P2A access */ |
| config_mode = ast_use_dt; |
| scu_rev = data; |
| } else if (pdev->device == PCI_CHIP_AST2000) { // Not all families have a P2A bridge |
| /* |
| * The BMC will set SCU 0x40 D[12] to 1 if the P2 bridge |
| * is disabled. We force using P2A if VGA only mode bit |
| * is set D[7] |
| */ |
| vgacrd0 = __ast_read8_i(ioregs, AST_IO_VGACRI, 0xd0); |
| vgacrd1 = __ast_read8_i(ioregs, AST_IO_VGACRI, 0xd1); |
| if (!(vgacrd0 & 0x80) || !(vgacrd1 & 0x10)) { |
| |
| /* |
| * We have a P2A bridge and it is enabled. |
| */ |
| |
| /* Patch AST2500/AST2510 */ |
| if ((pdev->revision & 0xf0) == 0x40) { |
| if (!(vgacrd0 & AST_VRAM_INIT_STATUS_MASK)) |
| ast_patch_ahb_2500(regs); |
| } |
| |
| /* Double check that it's actually working */ |
| data = __ast_read32(regs, 0xf004); |
| if ((data != 0xffffffff) && (data != 0x00)) { |
| config_mode = ast_use_p2a; |
| |
| /* Read SCU7c (silicon revision register) */ |
| __ast_write32(regs, 0xf004, 0x1e6e0000); |
| __ast_write32(regs, 0xf000, 0x1); |
| scu_rev = __ast_read32(regs, 0x1207c); |
| } |
| } |
| } |
| |
| switch (config_mode) { |
| case ast_use_defaults: |
| dev_info(dev, "Using default configuration\n"); |
| break; |
| case ast_use_dt: |
| dev_info(dev, "Using device-tree for configuration\n"); |
| break; |
| case ast_use_p2a: |
| dev_info(dev, "Using P2A bridge for configuration\n"); |
| break; |
| } |
| |
| /* |
| * Identify chipset |
| */ |
| |
| if (pdev->revision >= 0x50) { |
| chip = AST2600; |
| dev_info(dev, "AST 2600 detected\n"); |
| } else if (pdev->revision >= 0x40) { |
| switch (scu_rev & 0x300) { |
| case 0x0100: |
| chip = AST2510; |
| dev_info(dev, "AST 2510 detected\n"); |
| break; |
| default: |
| chip = AST2500; |
| dev_info(dev, "AST 2500 detected\n"); |
| break; |
| } |
| } else if (pdev->revision >= 0x30) { |
| switch (scu_rev & 0x300) { |
| case 0x0100: |
| chip = AST1400; |
| dev_info(dev, "AST 1400 detected\n"); |
| break; |
| default: |
| chip = AST2400; |
| dev_info(dev, "AST 2400 detected\n"); |
| break; |
| } |
| } else if (pdev->revision >= 0x20) { |
| switch (scu_rev & 0x300) { |
| case 0x0000: |
| chip = AST1300; |
| dev_info(dev, "AST 1300 detected\n"); |
| break; |
| default: |
| chip = AST2300; |
| dev_info(dev, "AST 2300 detected\n"); |
| break; |
| } |
| } else if (pdev->revision >= 0x10) { |
| switch (scu_rev & 0x0300) { |
| case 0x0200: |
| chip = AST1100; |
| dev_info(dev, "AST 1100 detected\n"); |
| break; |
| case 0x0100: |
| chip = AST2200; |
| dev_info(dev, "AST 2200 detected\n"); |
| break; |
| case 0x0000: |
| chip = AST2150; |
| dev_info(dev, "AST 2150 detected\n"); |
| break; |
| default: |
| chip = AST2100; |
| dev_info(dev, "AST 2100 detected\n"); |
| break; |
| } |
| } else { |
| chip = AST2000; |
| dev_info(dev, "AST 2000 detected\n"); |
| } |
| |
| *chip_out = chip; |
| *config_mode_out = config_mode; |
| |
| return 0; |
| } |
| |
| static int ast_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| struct device *dev = &pdev->dev; |
| int ret; |
| void __iomem *regs; |
| void __iomem *ioregs; |
| enum ast_config_mode config_mode; |
| enum ast_chip chip; |
| struct drm_device *drm; |
| bool need_post = false; |
| |
| ret = drm_aperture_remove_conflicting_pci_framebuffers(pdev, &ast_driver); |
| if (ret) |
| return ret; |
| |
| ret = pcim_enable_device(pdev); |
| if (ret) |
| return ret; |
| |
| regs = pcim_iomap(pdev, 1, 0); |
| if (!regs) |
| return -EIO; |
| |
| if (pdev->revision >= 0x40) { |
| /* |
| * On AST2500 and later models, MMIO is enabled by |
| * default. Adopt it to be compatible with ARM. |
| */ |
| resource_size_t len = pci_resource_len(pdev, 1); |
| |
| if (len < AST_IO_MM_OFFSET) |
| return -EIO; |
| if ((len - AST_IO_MM_OFFSET) < AST_IO_MM_LENGTH) |
| return -EIO; |
| ioregs = regs + AST_IO_MM_OFFSET; |
| } else if (pci_resource_flags(pdev, 2) & IORESOURCE_IO) { |
| /* |
| * Map I/O registers if we have a PCI BAR for I/O. |
| */ |
| resource_size_t len = pci_resource_len(pdev, 2); |
| |
| if (len < AST_IO_MM_LENGTH) |
| return -EIO; |
| ioregs = pcim_iomap(pdev, 2, 0); |
| if (!ioregs) |
| return -EIO; |
| } else { |
| /* |
| * Anything else is best effort. |
| */ |
| resource_size_t len = pci_resource_len(pdev, 1); |
| |
| if (len < AST_IO_MM_OFFSET) |
| return -EIO; |
| if ((len - AST_IO_MM_OFFSET) < AST_IO_MM_LENGTH) |
| return -EIO; |
| ioregs = regs + AST_IO_MM_OFFSET; |
| |
| dev_info(dev, "Platform has no I/O space, using MMIO\n"); |
| } |
| |
| if (!ast_is_vga_enabled(ioregs)) { |
| dev_info(dev, "VGA not enabled on entry, requesting chip POST\n"); |
| need_post = true; |
| } |
| |
| /* |
| * If VGA isn't enabled, we need to enable now or subsequent |
| * access to the scratch registers will fail. |
| */ |
| if (need_post) |
| ast_enable_vga(ioregs); |
| /* Enable extended register access */ |
| ast_open_key(ioregs); |
| |
| ret = ast_enable_mmio(dev, ioregs); |
| if (ret) |
| return ret; |
| |
| ret = ast_detect_chip(pdev, regs, ioregs, &chip, &config_mode); |
| if (ret) |
| return ret; |
| |
| drm = ast_device_create(pdev, &ast_driver, chip, config_mode, regs, ioregs, need_post); |
| if (IS_ERR(drm)) |
| return PTR_ERR(drm); |
| pci_set_drvdata(pdev, drm); |
| |
| ret = drm_dev_register(drm, ent->driver_data); |
| if (ret) |
| return ret; |
| |
| drm_fbdev_generic_setup(drm, 32); |
| |
| return 0; |
| } |
| |
| static void ast_pci_remove(struct pci_dev *pdev) |
| { |
| struct drm_device *dev = pci_get_drvdata(pdev); |
| |
| drm_dev_unregister(dev); |
| drm_atomic_helper_shutdown(dev); |
| } |
| |
| static void ast_pci_shutdown(struct pci_dev *pdev) |
| { |
| drm_atomic_helper_shutdown(pci_get_drvdata(pdev)); |
| } |
| |
| static int ast_drm_freeze(struct drm_device *dev) |
| { |
| int error; |
| |
| error = drm_mode_config_helper_suspend(dev); |
| if (error) |
| return error; |
| pci_save_state(to_pci_dev(dev->dev)); |
| return 0; |
| } |
| |
| static int ast_drm_thaw(struct drm_device *dev) |
| { |
| ast_post_gpu(dev); |
| |
| return drm_mode_config_helper_resume(dev); |
| } |
| |
| static int ast_drm_resume(struct drm_device *dev) |
| { |
| if (pci_enable_device(to_pci_dev(dev->dev))) |
| return -EIO; |
| |
| return ast_drm_thaw(dev); |
| } |
| |
| static int ast_pm_suspend(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct drm_device *ddev = pci_get_drvdata(pdev); |
| int error; |
| |
| error = ast_drm_freeze(ddev); |
| if (error) |
| return error; |
| |
| pci_disable_device(pdev); |
| pci_set_power_state(pdev, PCI_D3hot); |
| return 0; |
| } |
| |
| static int ast_pm_resume(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct drm_device *ddev = pci_get_drvdata(pdev); |
| return ast_drm_resume(ddev); |
| } |
| |
| static int ast_pm_freeze(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct drm_device *ddev = pci_get_drvdata(pdev); |
| return ast_drm_freeze(ddev); |
| } |
| |
| static int ast_pm_thaw(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct drm_device *ddev = pci_get_drvdata(pdev); |
| return ast_drm_thaw(ddev); |
| } |
| |
| static int ast_pm_poweroff(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct drm_device *ddev = pci_get_drvdata(pdev); |
| |
| return ast_drm_freeze(ddev); |
| } |
| |
| static const struct dev_pm_ops ast_pm_ops = { |
| .suspend = ast_pm_suspend, |
| .resume = ast_pm_resume, |
| .freeze = ast_pm_freeze, |
| .thaw = ast_pm_thaw, |
| .poweroff = ast_pm_poweroff, |
| .restore = ast_pm_resume, |
| }; |
| |
| static struct pci_driver ast_pci_driver = { |
| .name = DRIVER_NAME, |
| .id_table = ast_pciidlist, |
| .probe = ast_pci_probe, |
| .remove = ast_pci_remove, |
| .shutdown = ast_pci_shutdown, |
| .driver.pm = &ast_pm_ops, |
| }; |
| |
| drm_module_pci_driver_if_modeset(ast_pci_driver, ast_modeset); |
| |
| MODULE_AUTHOR(DRIVER_AUTHOR); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL and additional rights"); |