| /* SPDX-License-Identifier: GPL-2.0 */ |
| |
| #ifndef __NX_842_H__ |
| #define __NX_842_H__ |
| |
| #include <crypto/algapi.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/slab.h> |
| #include <linux/io.h> |
| #include <linux/mm.h> |
| #include <linux/ratelimit.h> |
| |
| /* Restrictions on Data Descriptor List (DDL) and Entry (DDE) buffers |
| * |
| * From NX P8 workbook, sec 4.9.1 "842 details" |
| * Each DDE buffer is 128 byte aligned |
| * Each DDE buffer size is a multiple of 32 bytes (except the last) |
| * The last DDE buffer size is a multiple of 8 bytes |
| */ |
| #define DDE_BUFFER_ALIGN (128) |
| #define DDE_BUFFER_SIZE_MULT (32) |
| #define DDE_BUFFER_LAST_MULT (8) |
| |
| /* Arbitrary DDL length limit |
| * Allows max buffer size of MAX-1 to MAX pages |
| * (depending on alignment) |
| */ |
| #define DDL_LEN_MAX (17) |
| |
| /* CCW 842 CI/FC masks |
| * NX P8 workbook, section 4.3.1, figure 4-6 |
| * "CI/FC Boundary by NX CT type" |
| */ |
| #define CCW_CI_842 (0x00003ff8) |
| #define CCW_FC_842 (0x00000007) |
| |
| /* CCW Function Codes (FC) for 842 |
| * NX P8 workbook, section 4.9, table 4-28 |
| * "Function Code Definitions for 842 Memory Compression" |
| */ |
| #define CCW_FC_842_COMP_NOCRC (0) |
| #define CCW_FC_842_COMP_CRC (1) |
| #define CCW_FC_842_DECOMP_NOCRC (2) |
| #define CCW_FC_842_DECOMP_CRC (3) |
| #define CCW_FC_842_MOVE (4) |
| |
| /* CSB CC Error Types for 842 |
| * NX P8 workbook, section 4.10.3, table 4-30 |
| * "Reported Error Types Summary Table" |
| */ |
| /* These are all duplicates of existing codes defined in icswx.h. */ |
| #define CSB_CC_TRANSLATION_DUP1 (80) |
| #define CSB_CC_TRANSLATION_DUP2 (82) |
| #define CSB_CC_TRANSLATION_DUP3 (84) |
| #define CSB_CC_TRANSLATION_DUP4 (86) |
| #define CSB_CC_TRANSLATION_DUP5 (92) |
| #define CSB_CC_TRANSLATION_DUP6 (94) |
| #define CSB_CC_PROTECTION_DUP1 (81) |
| #define CSB_CC_PROTECTION_DUP2 (83) |
| #define CSB_CC_PROTECTION_DUP3 (85) |
| #define CSB_CC_PROTECTION_DUP4 (87) |
| #define CSB_CC_PROTECTION_DUP5 (93) |
| #define CSB_CC_PROTECTION_DUP6 (95) |
| #define CSB_CC_RD_EXTERNAL_DUP1 (89) |
| #define CSB_CC_RD_EXTERNAL_DUP2 (90) |
| #define CSB_CC_RD_EXTERNAL_DUP3 (91) |
| /* These are specific to NX */ |
| /* 842 codes */ |
| #define CSB_CC_TPBC_GT_SPBC (64) /* no error, but >1 comp ratio */ |
| #define CSB_CC_CRC_MISMATCH (65) /* decomp crc mismatch */ |
| #define CSB_CC_TEMPL_INVALID (66) /* decomp invalid template value */ |
| #define CSB_CC_TEMPL_OVERFLOW (67) /* decomp template shows data after end */ |
| /* sym crypt codes */ |
| #define CSB_CC_DECRYPT_OVERFLOW (64) |
| /* asym crypt codes */ |
| #define CSB_CC_MINV_OVERFLOW (128) |
| /* |
| * HW error - Job did not finish in the maximum time allowed. |
| * Job terminated. |
| */ |
| #define CSB_CC_HW_EXPIRED_TIMER (224) |
| /* These are reserved for hypervisor use */ |
| #define CSB_CC_HYP_RESERVE_START (240) |
| #define CSB_CC_HYP_RESERVE_END (253) |
| #define CSB_CC_HYP_RESERVE_P9_END (251) |
| /* No valid interrupt server (P9 or later). */ |
| #define CSB_CC_HYP_RESERVE_NO_INTR_SERVER (252) |
| #define CSB_CC_HYP_NO_HW (254) |
| #define CSB_CC_HYP_HANG_ABORTED (255) |
| |
| /* CCB Completion Modes (CM) for 842 |
| * NX P8 workbook, section 4.3, figure 4-5 |
| * "CRB Details - Normal Cop_Req (CL=00, C=1)" |
| */ |
| #define CCB_CM_EXTRA_WRITE (CCB_CM0_ALL_COMPLETIONS & CCB_CM12_STORE) |
| #define CCB_CM_INTERRUPT (CCB_CM0_ALL_COMPLETIONS & CCB_CM12_INTERRUPT) |
| |
| #define LEN_ON_SIZE(pa, size) ((size) - ((pa) & ((size) - 1))) |
| #define LEN_ON_PAGE(pa) LEN_ON_SIZE(pa, PAGE_SIZE) |
| |
| static inline unsigned long nx842_get_pa(void *addr) |
| { |
| if (!is_vmalloc_addr(addr)) |
| return __pa(addr); |
| |
| return page_to_phys(vmalloc_to_page(addr)) + offset_in_page(addr); |
| } |
| |
| /** |
| * This provides the driver's constraints. Different nx842 implementations |
| * may have varying requirements. The constraints are: |
| * @alignment: All buffers should be aligned to this |
| * @multiple: All buffer lengths should be a multiple of this |
| * @minimum: Buffer lengths must not be less than this amount |
| * @maximum: Buffer lengths must not be more than this amount |
| * |
| * The constraints apply to all buffers and lengths, both input and output, |
| * for both compression and decompression, except for the minimum which |
| * only applies to compression input and decompression output; the |
| * compressed data can be less than the minimum constraint. It can be |
| * assumed that compressed data will always adhere to the multiple |
| * constraint. |
| * |
| * The driver may succeed even if these constraints are violated; |
| * however the driver can return failure or suffer reduced performance |
| * if any constraint is not met. |
| */ |
| struct nx842_constraints { |
| int alignment; |
| int multiple; |
| int minimum; |
| int maximum; |
| }; |
| |
| struct nx842_driver { |
| char *name; |
| struct module *owner; |
| size_t workmem_size; |
| |
| struct nx842_constraints *constraints; |
| |
| int (*compress)(const unsigned char *in, unsigned int in_len, |
| unsigned char *out, unsigned int *out_len, |
| void *wrkmem); |
| int (*decompress)(const unsigned char *in, unsigned int in_len, |
| unsigned char *out, unsigned int *out_len, |
| void *wrkmem); |
| }; |
| |
| struct nx842_crypto_header_group { |
| __be16 padding; /* unused bytes at start of group */ |
| __be32 compressed_length; /* compressed bytes in group */ |
| __be32 uncompressed_length; /* bytes after decompression */ |
| } __packed; |
| |
| struct nx842_crypto_header { |
| /* New members MUST be added within the struct_group() macro below. */ |
| struct_group_tagged(nx842_crypto_header_hdr, hdr, |
| __be16 magic; /* NX842_CRYPTO_MAGIC */ |
| __be16 ignore; /* decompressed end bytes to ignore */ |
| u8 groups; /* total groups in this header */ |
| ); |
| struct nx842_crypto_header_group group[]; |
| } __packed; |
| static_assert(offsetof(struct nx842_crypto_header, group) == sizeof(struct nx842_crypto_header_hdr), |
| "struct member likely outside of struct_group_tagged()"); |
| |
| #define NX842_CRYPTO_GROUP_MAX (0x20) |
| |
| struct nx842_crypto_ctx { |
| spinlock_t lock; |
| |
| u8 *wmem; |
| u8 *sbounce, *dbounce; |
| |
| struct nx842_crypto_header_hdr header; |
| struct nx842_crypto_header_group group[NX842_CRYPTO_GROUP_MAX]; |
| |
| struct nx842_driver *driver; |
| }; |
| |
| int nx842_crypto_init(struct crypto_tfm *tfm, struct nx842_driver *driver); |
| void nx842_crypto_exit(struct crypto_tfm *tfm); |
| int nx842_crypto_compress(struct crypto_tfm *tfm, |
| const u8 *src, unsigned int slen, |
| u8 *dst, unsigned int *dlen); |
| int nx842_crypto_decompress(struct crypto_tfm *tfm, |
| const u8 *src, unsigned int slen, |
| u8 *dst, unsigned int *dlen); |
| |
| #endif /* __NX_842_H__ */ |