| // SPDX-License-Identifier: ISC |
| /* Copyright (C) 2023 MediaTek Inc. */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/usb.h> |
| |
| #include "mt7925.h" |
| #include "mcu.h" |
| #include "mac.h" |
| |
| static const struct usb_device_id mt7925u_device_table[] = { |
| { USB_DEVICE_AND_INTERFACE_INFO(0x0e8d, 0x7925, 0xff, 0xff, 0xff), |
| .driver_info = (kernel_ulong_t)MT7925_FIRMWARE_WM }, |
| { }, |
| }; |
| |
| static int |
| mt7925u_mcu_send_message(struct mt76_dev *mdev, struct sk_buff *skb, |
| int cmd, int *seq) |
| { |
| struct mt792x_dev *dev = container_of(mdev, struct mt792x_dev, mt76); |
| u32 pad, ep; |
| int ret; |
| |
| ret = mt7925_mcu_fill_message(mdev, skb, cmd, seq); |
| if (ret) |
| return ret; |
| |
| mdev->mcu.timeout = 3 * HZ; |
| |
| if (cmd != MCU_CMD(FW_SCATTER)) |
| ep = MT_EP_OUT_INBAND_CMD; |
| else |
| ep = MT_EP_OUT_AC_BE; |
| |
| mt792x_skb_add_usb_sdio_hdr(dev, skb, 0); |
| pad = round_up(skb->len, 4) + 4 - skb->len; |
| __skb_put_zero(skb, pad); |
| |
| ret = mt76u_bulk_msg(&dev->mt76, skb->data, skb->len, NULL, |
| 1000, ep); |
| dev_kfree_skb(skb); |
| |
| return ret; |
| } |
| |
| static int mt7925u_mcu_init(struct mt792x_dev *dev) |
| { |
| static const struct mt76_mcu_ops mcu_ops = { |
| .headroom = MT_SDIO_HDR_SIZE + |
| sizeof(struct mt76_connac2_mcu_txd), |
| .tailroom = MT_USB_TAIL_SIZE, |
| .mcu_skb_send_msg = mt7925u_mcu_send_message, |
| .mcu_parse_response = mt7925_mcu_parse_response, |
| }; |
| int ret; |
| |
| dev->mt76.mcu_ops = &mcu_ops; |
| |
| mt76_set(dev, MT_UDMA_TX_QSEL, MT_FW_DL_EN); |
| ret = mt7925_run_firmware(dev); |
| if (ret) |
| return ret; |
| |
| set_bit(MT76_STATE_MCU_RUNNING, &dev->mphy.state); |
| mt76_clear(dev, MT_UDMA_TX_QSEL, MT_FW_DL_EN); |
| |
| return 0; |
| } |
| |
| static int mt7925u_mac_reset(struct mt792x_dev *dev) |
| { |
| int err; |
| |
| mt76_txq_schedule_all(&dev->mphy); |
| mt76_worker_disable(&dev->mt76.tx_worker); |
| |
| set_bit(MT76_RESET, &dev->mphy.state); |
| set_bit(MT76_MCU_RESET, &dev->mphy.state); |
| |
| wake_up(&dev->mt76.mcu.wait); |
| skb_queue_purge(&dev->mt76.mcu.res_q); |
| |
| mt76u_stop_rx(&dev->mt76); |
| mt76u_stop_tx(&dev->mt76); |
| |
| mt792xu_wfsys_reset(dev); |
| |
| clear_bit(MT76_MCU_RESET, &dev->mphy.state); |
| err = mt76u_resume_rx(&dev->mt76); |
| if (err) |
| goto out; |
| |
| err = mt792xu_mcu_power_on(dev); |
| if (err) |
| goto out; |
| |
| err = mt792xu_dma_init(dev, false); |
| if (err) |
| goto out; |
| |
| mt76_wr(dev, MT_SWDEF_MODE, MT_SWDEF_NORMAL_MODE); |
| mt76_set(dev, MT_UDMA_TX_QSEL, MT_FW_DL_EN); |
| |
| err = mt7925_run_firmware(dev); |
| if (err) |
| goto out; |
| |
| mt76_clear(dev, MT_UDMA_TX_QSEL, MT_FW_DL_EN); |
| |
| err = mt7925_mcu_set_eeprom(dev); |
| if (err) |
| goto out; |
| |
| err = mt7925_mac_init(dev); |
| if (err) |
| goto out; |
| |
| err = __mt7925_start(&dev->phy); |
| out: |
| clear_bit(MT76_RESET, &dev->mphy.state); |
| |
| mt76_worker_enable(&dev->mt76.tx_worker); |
| |
| return err; |
| } |
| |
| static int mt7925u_probe(struct usb_interface *usb_intf, |
| const struct usb_device_id *id) |
| { |
| static const struct mt76_driver_ops drv_ops = { |
| .txwi_size = MT_SDIO_TXD_SIZE, |
| .drv_flags = MT_DRV_RX_DMA_HDR | MT_DRV_HW_MGMT_TXQ | |
| MT_DRV_AMSDU_OFFLOAD, |
| .survey_flags = SURVEY_INFO_TIME_TX | |
| SURVEY_INFO_TIME_RX | |
| SURVEY_INFO_TIME_BSS_RX, |
| .tx_prepare_skb = mt7925_usb_sdio_tx_prepare_skb, |
| .tx_complete_skb = mt7925_usb_sdio_tx_complete_skb, |
| .tx_status_data = mt7925_usb_sdio_tx_status_data, |
| .rx_skb = mt7925_queue_rx_skb, |
| .rx_check = mt7925_rx_check, |
| .sta_add = mt7925_mac_sta_add, |
| .sta_event = mt7925_mac_sta_event, |
| .sta_remove = mt7925_mac_sta_remove, |
| .update_survey = mt792x_update_channel, |
| }; |
| static const struct mt792x_hif_ops hif_ops = { |
| .mcu_init = mt7925u_mcu_init, |
| .init_reset = mt792xu_init_reset, |
| .reset = mt7925u_mac_reset, |
| }; |
| static struct mt76_bus_ops bus_ops = { |
| .rr = mt792xu_rr, |
| .wr = mt792xu_wr, |
| .rmw = mt792xu_rmw, |
| .read_copy = mt76u_read_copy, |
| .write_copy = mt792xu_copy, |
| .type = MT76_BUS_USB, |
| }; |
| struct usb_device *udev = interface_to_usbdev(usb_intf); |
| struct ieee80211_ops *ops; |
| struct ieee80211_hw *hw; |
| struct mt792x_dev *dev; |
| struct mt76_dev *mdev; |
| u8 features; |
| int ret; |
| |
| ops = mt792x_get_mac80211_ops(&usb_intf->dev, &mt7925_ops, |
| (void *)id->driver_info, &features); |
| if (!ops) |
| return -ENOMEM; |
| |
| ops->stop = mt792xu_stop; |
| |
| mdev = mt76_alloc_device(&usb_intf->dev, sizeof(*dev), ops, &drv_ops); |
| if (!mdev) |
| return -ENOMEM; |
| |
| dev = container_of(mdev, struct mt792x_dev, mt76); |
| dev->fw_features = features; |
| dev->hif_ops = &hif_ops; |
| |
| udev = usb_get_dev(udev); |
| usb_reset_device(udev); |
| |
| usb_set_intfdata(usb_intf, dev); |
| |
| ret = __mt76u_init(mdev, usb_intf, &bus_ops); |
| if (ret < 0) |
| goto error; |
| |
| mdev->rev = (mt76_rr(dev, MT_HW_CHIPID) << 16) | |
| (mt76_rr(dev, MT_HW_REV) & 0xff); |
| dev_dbg(mdev->dev, "ASIC revision: %04x\n", mdev->rev); |
| |
| if (mt76_get_field(dev, MT_CONN_ON_MISC, MT_TOP_MISC2_FW_N9_RDY)) { |
| ret = mt792xu_wfsys_reset(dev); |
| if (ret) |
| goto error; |
| } |
| |
| ret = mt792xu_mcu_power_on(dev); |
| if (ret) |
| goto error; |
| |
| ret = mt76u_alloc_mcu_queue(&dev->mt76); |
| if (ret) |
| goto error; |
| |
| ret = mt76u_alloc_queues(&dev->mt76); |
| if (ret) |
| goto error; |
| |
| ret = mt792xu_dma_init(dev, false); |
| if (ret) |
| goto error; |
| |
| hw = mt76_hw(dev); |
| /* check hw sg support in order to enable AMSDU */ |
| hw->max_tx_fragments = mdev->usb.sg_en ? MT_HW_TXP_MAX_BUF_NUM : 1; |
| |
| ret = mt7925_register_device(dev); |
| if (ret) |
| goto error; |
| |
| return 0; |
| |
| error: |
| mt76u_queues_deinit(&dev->mt76); |
| |
| usb_set_intfdata(usb_intf, NULL); |
| usb_put_dev(interface_to_usbdev(usb_intf)); |
| |
| mt76_free_device(&dev->mt76); |
| |
| return ret; |
| } |
| |
| #ifdef CONFIG_PM |
| static int mt7925u_suspend(struct usb_interface *intf, pm_message_t state) |
| { |
| struct mt792x_dev *dev = usb_get_intfdata(intf); |
| struct mt76_connac_pm *pm = &dev->pm; |
| int err; |
| |
| pm->suspended = true; |
| flush_work(&dev->reset_work); |
| |
| err = mt76_connac_mcu_set_hif_suspend(&dev->mt76, true); |
| if (err) |
| goto failed; |
| |
| mt76u_stop_rx(&dev->mt76); |
| mt76u_stop_tx(&dev->mt76); |
| |
| return 0; |
| |
| failed: |
| pm->suspended = false; |
| |
| if (err < 0) |
| mt792x_reset(&dev->mt76); |
| |
| return err; |
| } |
| |
| static int mt7925u_resume(struct usb_interface *intf) |
| { |
| struct mt792x_dev *dev = usb_get_intfdata(intf); |
| struct mt76_connac_pm *pm = &dev->pm; |
| bool reinit = true; |
| int err, i; |
| |
| for (i = 0; i < 10; i++) { |
| u32 val = mt76_rr(dev, MT_WF_SW_DEF_CR_USB_MCU_EVENT); |
| |
| if (!(val & MT_WF_SW_SER_TRIGGER_SUSPEND)) { |
| reinit = false; |
| break; |
| } |
| if (val & MT_WF_SW_SER_DONE_SUSPEND) { |
| mt76_wr(dev, MT_WF_SW_DEF_CR_USB_MCU_EVENT, 0); |
| break; |
| } |
| |
| msleep(20); |
| } |
| |
| if (reinit || mt792x_dma_need_reinit(dev)) { |
| err = mt792xu_dma_init(dev, true); |
| if (err) |
| goto failed; |
| } |
| |
| err = mt76u_resume_rx(&dev->mt76); |
| if (err < 0) |
| goto failed; |
| |
| err = mt76_connac_mcu_set_hif_suspend(&dev->mt76, false); |
| failed: |
| pm->suspended = false; |
| |
| if (err < 0) |
| mt792x_reset(&dev->mt76); |
| |
| return err; |
| } |
| #endif /* CONFIG_PM */ |
| |
| MODULE_DEVICE_TABLE(usb, mt7925u_device_table); |
| MODULE_FIRMWARE(MT7925_FIRMWARE_WM); |
| MODULE_FIRMWARE(MT7925_ROM_PATCH); |
| |
| static struct usb_driver mt7925u_driver = { |
| .name = KBUILD_MODNAME, |
| .id_table = mt7925u_device_table, |
| .probe = mt7925u_probe, |
| .disconnect = mt792xu_disconnect, |
| #ifdef CONFIG_PM |
| .suspend = mt7925u_suspend, |
| .resume = mt7925u_resume, |
| .reset_resume = mt7925u_resume, |
| #endif /* CONFIG_PM */ |
| .soft_unbind = 1, |
| .disable_hub_initiated_lpm = 1, |
| }; |
| module_usb_driver(mt7925u_driver); |
| |
| MODULE_AUTHOR("Lorenzo Bianconi <lorenzo@kernel.org>"); |
| MODULE_DESCRIPTION("MediaTek MT7925U (USB) wireless driver"); |
| MODULE_LICENSE("Dual BSD/GPL"); |