| /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ |
| /* |
| * Copyright (C) 2005-2014, 2018-2021, 2024 Intel Corporation |
| * Copyright (C) 2013-2014 Intel Mobile Communications GmbH |
| * Copyright (C) 2015 Intel Deutschland GmbH |
| */ |
| #ifndef __iwl_op_mode_h__ |
| #define __iwl_op_mode_h__ |
| |
| #include <linux/netdevice.h> |
| #include <linux/debugfs.h> |
| #include "iwl-dbg-tlv.h" |
| |
| struct iwl_op_mode; |
| struct iwl_trans; |
| struct sk_buff; |
| struct iwl_device_cmd; |
| struct iwl_rx_cmd_buffer; |
| struct iwl_fw; |
| struct iwl_cfg; |
| |
| /** |
| * DOC: Operational mode - what is it ? |
| * |
| * The operational mode (a.k.a. op_mode) is the layer that implements |
| * mac80211's handlers. It knows two APIs: mac80211's and the fw's. It uses |
| * the transport API to access the HW. The op_mode doesn't need to know how the |
| * underlying HW works, since the transport layer takes care of that. |
| * |
| * There can be several op_mode: i.e. different fw APIs will require two |
| * different op_modes. This is why the op_mode is virtualized. |
| */ |
| |
| /** |
| * DOC: Life cycle of the Operational mode |
| * |
| * The operational mode has a very simple life cycle. |
| * |
| * 1) The driver layer (iwl-drv.c) chooses the op_mode based on the |
| * capabilities advertised by the fw file (in TLV format). |
| * 2) The driver layer starts the op_mode (ops->start) |
| * 3) The op_mode registers mac80211 |
| * 4) The op_mode is governed by mac80211 |
| * 5) The driver layer stops the op_mode |
| */ |
| |
| /** |
| * struct iwl_op_mode_ops - op_mode specific operations |
| * |
| * The op_mode exports its ops so that external components can start it and |
| * interact with it. The driver layer typically calls the start and stop |
| * handlers, the transport layer calls the others. |
| * |
| * All the handlers MUST be implemented, except @rx_rss which can be left |
| * out *iff* the opmode will never run on hardware with multi-queue capability. |
| * |
| * @start: start the op_mode. The transport layer is already allocated. |
| * May sleep |
| * @stop: stop the op_mode. Must free all the memory allocated. |
| * May sleep |
| * @rx: Rx notification to the op_mode. rxb is the Rx buffer itself. Cmd is the |
| * HCMD this Rx responds to. Can't sleep. |
| * @rx_rss: data queue RX notification to the op_mode, for (data) notifications |
| * received on the RSS queue(s). The queue parameter indicates which of the |
| * RSS queues received this frame; it will always be non-zero. |
| * This method must not sleep. |
| * @queue_full: notifies that a HW queue is full. |
| * Must be atomic and called with BH disabled. |
| * @queue_not_full: notifies that a HW queue is not full any more. |
| * Must be atomic and called with BH disabled. |
| * @hw_rf_kill: notifies of a change in the HW rf kill switch. True means that |
| * the radio is killed. Return %true if the device should be stopped by |
| * the transport immediately after the call. May sleep. |
| * Note that this must not return %true for newer devices using gen2 PCIe |
| * transport. |
| * @free_skb: allows the transport layer to free skbs that haven't been |
| * reclaimed by the op_mode. This can happen when the driver is freed and |
| * there are Tx packets pending in the transport layer. |
| * Must be atomic |
| * @nic_error: error notification. Must be atomic and must be called with BH |
| * disabled, unless the sync parameter is true. |
| * @cmd_queue_full: Called when the command queue gets full. Must be atomic and |
| * called with BH disabled. |
| * @nic_config: configure NIC, called before firmware is started. |
| * May sleep |
| * @wimax_active: invoked when WiMax becomes active. May sleep |
| * @time_point: called when transport layer wants to collect debug data |
| */ |
| struct iwl_op_mode_ops { |
| struct iwl_op_mode *(*start)(struct iwl_trans *trans, |
| const struct iwl_cfg *cfg, |
| const struct iwl_fw *fw, |
| struct dentry *dbgfs_dir); |
| void (*stop)(struct iwl_op_mode *op_mode); |
| void (*rx)(struct iwl_op_mode *op_mode, struct napi_struct *napi, |
| struct iwl_rx_cmd_buffer *rxb); |
| void (*rx_rss)(struct iwl_op_mode *op_mode, struct napi_struct *napi, |
| struct iwl_rx_cmd_buffer *rxb, unsigned int queue); |
| void (*queue_full)(struct iwl_op_mode *op_mode, int queue); |
| void (*queue_not_full)(struct iwl_op_mode *op_mode, int queue); |
| bool (*hw_rf_kill)(struct iwl_op_mode *op_mode, bool state); |
| void (*free_skb)(struct iwl_op_mode *op_mode, struct sk_buff *skb); |
| void (*nic_error)(struct iwl_op_mode *op_mode, bool sync); |
| void (*cmd_queue_full)(struct iwl_op_mode *op_mode); |
| void (*nic_config)(struct iwl_op_mode *op_mode); |
| void (*wimax_active)(struct iwl_op_mode *op_mode); |
| void (*time_point)(struct iwl_op_mode *op_mode, |
| enum iwl_fw_ini_time_point tp_id, |
| union iwl_dbg_tlv_tp_data *tp_data); |
| }; |
| |
| int iwl_opmode_register(const char *name, const struct iwl_op_mode_ops *ops); |
| void iwl_opmode_deregister(const char *name); |
| |
| /** |
| * struct iwl_op_mode - operational mode |
| * @ops: pointer to its own ops |
| * |
| * This holds an implementation of the mac80211 / fw API. |
| */ |
| struct iwl_op_mode { |
| const struct iwl_op_mode_ops *ops; |
| |
| char op_mode_specific[] __aligned(sizeof(void *)); |
| }; |
| |
| static inline void iwl_op_mode_stop(struct iwl_op_mode *op_mode) |
| { |
| might_sleep(); |
| op_mode->ops->stop(op_mode); |
| } |
| |
| static inline void iwl_op_mode_rx(struct iwl_op_mode *op_mode, |
| struct napi_struct *napi, |
| struct iwl_rx_cmd_buffer *rxb) |
| { |
| return op_mode->ops->rx(op_mode, napi, rxb); |
| } |
| |
| static inline void iwl_op_mode_rx_rss(struct iwl_op_mode *op_mode, |
| struct napi_struct *napi, |
| struct iwl_rx_cmd_buffer *rxb, |
| unsigned int queue) |
| { |
| op_mode->ops->rx_rss(op_mode, napi, rxb, queue); |
| } |
| |
| static inline void iwl_op_mode_queue_full(struct iwl_op_mode *op_mode, |
| int queue) |
| { |
| op_mode->ops->queue_full(op_mode, queue); |
| } |
| |
| static inline void iwl_op_mode_queue_not_full(struct iwl_op_mode *op_mode, |
| int queue) |
| { |
| op_mode->ops->queue_not_full(op_mode, queue); |
| } |
| |
| static inline bool __must_check |
| iwl_op_mode_hw_rf_kill(struct iwl_op_mode *op_mode, bool state) |
| { |
| might_sleep(); |
| return op_mode->ops->hw_rf_kill(op_mode, state); |
| } |
| |
| static inline void iwl_op_mode_free_skb(struct iwl_op_mode *op_mode, |
| struct sk_buff *skb) |
| { |
| if (WARN_ON_ONCE(!op_mode)) |
| return; |
| op_mode->ops->free_skb(op_mode, skb); |
| } |
| |
| static inline void iwl_op_mode_nic_error(struct iwl_op_mode *op_mode, bool sync) |
| { |
| op_mode->ops->nic_error(op_mode, sync); |
| } |
| |
| static inline void iwl_op_mode_cmd_queue_full(struct iwl_op_mode *op_mode) |
| { |
| op_mode->ops->cmd_queue_full(op_mode); |
| } |
| |
| static inline void iwl_op_mode_nic_config(struct iwl_op_mode *op_mode) |
| { |
| might_sleep(); |
| if (op_mode->ops->nic_config) |
| op_mode->ops->nic_config(op_mode); |
| } |
| |
| static inline void iwl_op_mode_wimax_active(struct iwl_op_mode *op_mode) |
| { |
| might_sleep(); |
| op_mode->ops->wimax_active(op_mode); |
| } |
| |
| static inline void iwl_op_mode_time_point(struct iwl_op_mode *op_mode, |
| enum iwl_fw_ini_time_point tp_id, |
| union iwl_dbg_tlv_tp_data *tp_data) |
| { |
| if (!op_mode || !op_mode->ops || !op_mode->ops->time_point) |
| return; |
| op_mode->ops->time_point(op_mode, tp_id, tp_data); |
| } |
| |
| #endif /* __iwl_op_mode_h__ */ |