| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * R-Car THS/TSC thermal sensor driver |
| * |
| * Copyright (C) 2012 Renesas Solutions Corp. |
| * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> |
| */ |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/irq.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/reboot.h> |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| #include <linux/thermal.h> |
| |
| #include "thermal_hwmon.h" |
| |
| #define IDLE_INTERVAL 5000 |
| |
| #define COMMON_STR 0x00 |
| #define COMMON_ENR 0x04 |
| #define COMMON_INTMSK 0x0c |
| |
| #define REG_POSNEG 0x20 |
| #define REG_FILONOFF 0x28 |
| #define REG_THSCR 0x2c |
| #define REG_THSSR 0x30 |
| #define REG_INTCTRL 0x34 |
| |
| /* THSCR */ |
| #define CPCTL (1 << 12) |
| |
| /* THSSR */ |
| #define CTEMP 0x3f |
| |
| struct rcar_thermal_common { |
| void __iomem *base; |
| struct device *dev; |
| struct list_head head; |
| spinlock_t lock; |
| }; |
| |
| struct rcar_thermal_chip { |
| unsigned int use_of_thermal : 1; |
| unsigned int has_filonoff : 1; |
| unsigned int irq_per_ch : 1; |
| unsigned int needs_suspend_resume : 1; |
| unsigned int nirqs; |
| unsigned int ctemp_bands; |
| }; |
| |
| static const struct rcar_thermal_chip rcar_thermal = { |
| .use_of_thermal = 0, |
| .has_filonoff = 1, |
| .irq_per_ch = 0, |
| .needs_suspend_resume = 0, |
| .nirqs = 1, |
| .ctemp_bands = 1, |
| }; |
| |
| static const struct rcar_thermal_chip rcar_gen2_thermal = { |
| .use_of_thermal = 1, |
| .has_filonoff = 1, |
| .irq_per_ch = 0, |
| .needs_suspend_resume = 0, |
| .nirqs = 1, |
| .ctemp_bands = 1, |
| }; |
| |
| static const struct rcar_thermal_chip rcar_gen3_thermal = { |
| .use_of_thermal = 1, |
| .has_filonoff = 0, |
| .irq_per_ch = 1, |
| .needs_suspend_resume = 1, |
| /* |
| * The Gen3 chip has 3 interrupts, but this driver uses only 2 |
| * interrupts to detect a temperature change, rise or fall. |
| */ |
| .nirqs = 2, |
| .ctemp_bands = 2, |
| }; |
| |
| struct rcar_thermal_priv { |
| void __iomem *base; |
| struct rcar_thermal_common *common; |
| struct thermal_zone_device *zone; |
| const struct rcar_thermal_chip *chip; |
| struct delayed_work work; |
| struct mutex lock; |
| struct list_head list; |
| int id; |
| u32 ctemp; |
| }; |
| |
| #define rcar_thermal_for_each_priv(pos, common) \ |
| list_for_each_entry(pos, &common->head, list) |
| |
| #define MCELSIUS(temp) ((temp) * 1000) |
| #define rcar_zone_to_priv(zone) ((zone)->devdata) |
| #define rcar_priv_to_dev(priv) ((priv)->common->dev) |
| #define rcar_has_irq_support(priv) ((priv)->common->base) |
| #define rcar_id_to_shift(priv) ((priv)->id * 8) |
| |
| static const struct of_device_id rcar_thermal_dt_ids[] = { |
| { |
| .compatible = "renesas,rcar-thermal", |
| .data = &rcar_thermal, |
| }, |
| { |
| .compatible = "renesas,rcar-gen2-thermal", |
| .data = &rcar_gen2_thermal, |
| }, |
| { |
| .compatible = "renesas,thermal-r8a774c0", |
| .data = &rcar_gen3_thermal, |
| }, |
| { |
| .compatible = "renesas,thermal-r8a77970", |
| .data = &rcar_gen3_thermal, |
| }, |
| { |
| .compatible = "renesas,thermal-r8a77990", |
| .data = &rcar_gen3_thermal, |
| }, |
| { |
| .compatible = "renesas,thermal-r8a77995", |
| .data = &rcar_gen3_thermal, |
| }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, rcar_thermal_dt_ids); |
| |
| /* |
| * basic functions |
| */ |
| #define rcar_thermal_common_read(c, r) \ |
| _rcar_thermal_common_read(c, COMMON_ ##r) |
| static u32 _rcar_thermal_common_read(struct rcar_thermal_common *common, |
| u32 reg) |
| { |
| return ioread32(common->base + reg); |
| } |
| |
| #define rcar_thermal_common_write(c, r, d) \ |
| _rcar_thermal_common_write(c, COMMON_ ##r, d) |
| static void _rcar_thermal_common_write(struct rcar_thermal_common *common, |
| u32 reg, u32 data) |
| { |
| iowrite32(data, common->base + reg); |
| } |
| |
| #define rcar_thermal_common_bset(c, r, m, d) \ |
| _rcar_thermal_common_bset(c, COMMON_ ##r, m, d) |
| static void _rcar_thermal_common_bset(struct rcar_thermal_common *common, |
| u32 reg, u32 mask, u32 data) |
| { |
| u32 val; |
| |
| val = ioread32(common->base + reg); |
| val &= ~mask; |
| val |= (data & mask); |
| iowrite32(val, common->base + reg); |
| } |
| |
| #define rcar_thermal_read(p, r) _rcar_thermal_read(p, REG_ ##r) |
| static u32 _rcar_thermal_read(struct rcar_thermal_priv *priv, u32 reg) |
| { |
| return ioread32(priv->base + reg); |
| } |
| |
| #define rcar_thermal_write(p, r, d) _rcar_thermal_write(p, REG_ ##r, d) |
| static void _rcar_thermal_write(struct rcar_thermal_priv *priv, |
| u32 reg, u32 data) |
| { |
| iowrite32(data, priv->base + reg); |
| } |
| |
| #define rcar_thermal_bset(p, r, m, d) _rcar_thermal_bset(p, REG_ ##r, m, d) |
| static void _rcar_thermal_bset(struct rcar_thermal_priv *priv, u32 reg, |
| u32 mask, u32 data) |
| { |
| u32 val; |
| |
| val = ioread32(priv->base + reg); |
| val &= ~mask; |
| val |= (data & mask); |
| iowrite32(val, priv->base + reg); |
| } |
| |
| /* |
| * zone device functions |
| */ |
| static int rcar_thermal_update_temp(struct rcar_thermal_priv *priv) |
| { |
| struct device *dev = rcar_priv_to_dev(priv); |
| int i; |
| u32 ctemp, old, new; |
| int ret = -EINVAL; |
| |
| mutex_lock(&priv->lock); |
| |
| /* |
| * TSC decides a value of CPTAP automatically, |
| * and this is the conditions which validate interrupt. |
| */ |
| rcar_thermal_bset(priv, THSCR, CPCTL, CPCTL); |
| |
| ctemp = 0; |
| old = ~0; |
| for (i = 0; i < 128; i++) { |
| /* |
| * we need to wait 300us after changing comparator offset |
| * to get stable temperature. |
| * see "Usage Notes" on datasheet |
| */ |
| usleep_range(300, 400); |
| |
| new = rcar_thermal_read(priv, THSSR) & CTEMP; |
| if (new == old) { |
| ctemp = new; |
| break; |
| } |
| old = new; |
| } |
| |
| if (!ctemp) { |
| dev_err(dev, "thermal sensor was broken\n"); |
| goto err_out_unlock; |
| } |
| |
| /* |
| * enable IRQ |
| */ |
| if (rcar_has_irq_support(priv)) { |
| if (priv->chip->has_filonoff) |
| rcar_thermal_write(priv, FILONOFF, 0); |
| |
| /* enable Rising/Falling edge interrupt */ |
| rcar_thermal_write(priv, POSNEG, 0x1); |
| rcar_thermal_write(priv, INTCTRL, (((ctemp - 0) << 8) | |
| ((ctemp - 1) << 0))); |
| } |
| |
| dev_dbg(dev, "thermal%d %d -> %d\n", priv->id, priv->ctemp, ctemp); |
| |
| priv->ctemp = ctemp; |
| ret = 0; |
| err_out_unlock: |
| mutex_unlock(&priv->lock); |
| return ret; |
| } |
| |
| static int rcar_thermal_get_current_temp(struct rcar_thermal_priv *priv, |
| int *temp) |
| { |
| int tmp; |
| int ret; |
| |
| ret = rcar_thermal_update_temp(priv); |
| if (ret < 0) |
| return ret; |
| |
| mutex_lock(&priv->lock); |
| if (priv->chip->ctemp_bands == 1) |
| tmp = MCELSIUS((priv->ctemp * 5) - 65); |
| else if (priv->ctemp < 24) |
| tmp = MCELSIUS(((priv->ctemp * 55) - 720) / 10); |
| else |
| tmp = MCELSIUS((priv->ctemp * 5) - 60); |
| mutex_unlock(&priv->lock); |
| |
| /* Guaranteed operating range is -45C to 125C. */ |
| |
| *temp = tmp; |
| |
| return 0; |
| } |
| |
| static int rcar_thermal_of_get_temp(void *data, int *temp) |
| { |
| struct rcar_thermal_priv *priv = data; |
| |
| return rcar_thermal_get_current_temp(priv, temp); |
| } |
| |
| static int rcar_thermal_get_temp(struct thermal_zone_device *zone, int *temp) |
| { |
| struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone); |
| |
| return rcar_thermal_get_current_temp(priv, temp); |
| } |
| |
| static int rcar_thermal_get_trip_type(struct thermal_zone_device *zone, |
| int trip, enum thermal_trip_type *type) |
| { |
| struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone); |
| struct device *dev = rcar_priv_to_dev(priv); |
| |
| /* see rcar_thermal_get_temp() */ |
| switch (trip) { |
| case 0: /* +90 <= temp */ |
| *type = THERMAL_TRIP_CRITICAL; |
| break; |
| default: |
| dev_err(dev, "rcar driver trip error\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int rcar_thermal_get_trip_temp(struct thermal_zone_device *zone, |
| int trip, int *temp) |
| { |
| struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone); |
| struct device *dev = rcar_priv_to_dev(priv); |
| |
| /* see rcar_thermal_get_temp() */ |
| switch (trip) { |
| case 0: /* +90 <= temp */ |
| *temp = MCELSIUS(90); |
| break; |
| default: |
| dev_err(dev, "rcar driver trip error\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int rcar_thermal_notify(struct thermal_zone_device *zone, |
| int trip, enum thermal_trip_type type) |
| { |
| struct rcar_thermal_priv *priv = rcar_zone_to_priv(zone); |
| struct device *dev = rcar_priv_to_dev(priv); |
| |
| switch (type) { |
| case THERMAL_TRIP_CRITICAL: |
| /* FIXME */ |
| dev_warn(dev, "Thermal reached to critical temperature\n"); |
| break; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static const struct thermal_zone_of_device_ops rcar_thermal_zone_of_ops = { |
| .get_temp = rcar_thermal_of_get_temp, |
| }; |
| |
| static struct thermal_zone_device_ops rcar_thermal_zone_ops = { |
| .get_temp = rcar_thermal_get_temp, |
| .get_trip_type = rcar_thermal_get_trip_type, |
| .get_trip_temp = rcar_thermal_get_trip_temp, |
| .notify = rcar_thermal_notify, |
| }; |
| |
| /* |
| * interrupt |
| */ |
| #define rcar_thermal_irq_enable(p) _rcar_thermal_irq_ctrl(p, 1) |
| #define rcar_thermal_irq_disable(p) _rcar_thermal_irq_ctrl(p, 0) |
| static void _rcar_thermal_irq_ctrl(struct rcar_thermal_priv *priv, int enable) |
| { |
| struct rcar_thermal_common *common = priv->common; |
| unsigned long flags; |
| u32 mask = 0x3 << rcar_id_to_shift(priv); /* enable Rising/Falling */ |
| |
| if (!rcar_has_irq_support(priv)) |
| return; |
| |
| spin_lock_irqsave(&common->lock, flags); |
| |
| rcar_thermal_common_bset(common, INTMSK, mask, enable ? 0 : mask); |
| |
| spin_unlock_irqrestore(&common->lock, flags); |
| } |
| |
| static void rcar_thermal_work(struct work_struct *work) |
| { |
| struct rcar_thermal_priv *priv; |
| int cctemp, nctemp; |
| int ret; |
| |
| priv = container_of(work, struct rcar_thermal_priv, work.work); |
| |
| ret = rcar_thermal_get_current_temp(priv, &cctemp); |
| if (ret < 0) |
| return; |
| |
| ret = rcar_thermal_update_temp(priv); |
| if (ret < 0) |
| return; |
| |
| rcar_thermal_irq_enable(priv); |
| |
| ret = rcar_thermal_get_current_temp(priv, &nctemp); |
| if (ret < 0) |
| return; |
| |
| if (nctemp != cctemp) |
| thermal_zone_device_update(priv->zone, |
| THERMAL_EVENT_UNSPECIFIED); |
| } |
| |
| static u32 rcar_thermal_had_changed(struct rcar_thermal_priv *priv, u32 status) |
| { |
| struct device *dev = rcar_priv_to_dev(priv); |
| |
| status = (status >> rcar_id_to_shift(priv)) & 0x3; |
| |
| if (status) { |
| dev_dbg(dev, "thermal%d %s%s\n", |
| priv->id, |
| (status & 0x2) ? "Rising " : "", |
| (status & 0x1) ? "Falling" : ""); |
| } |
| |
| return status; |
| } |
| |
| static irqreturn_t rcar_thermal_irq(int irq, void *data) |
| { |
| struct rcar_thermal_common *common = data; |
| struct rcar_thermal_priv *priv; |
| unsigned long flags; |
| u32 status, mask; |
| |
| spin_lock_irqsave(&common->lock, flags); |
| |
| mask = rcar_thermal_common_read(common, INTMSK); |
| status = rcar_thermal_common_read(common, STR); |
| rcar_thermal_common_write(common, STR, 0x000F0F0F & mask); |
| |
| spin_unlock_irqrestore(&common->lock, flags); |
| |
| status = status & ~mask; |
| |
| /* |
| * check the status |
| */ |
| rcar_thermal_for_each_priv(priv, common) { |
| if (rcar_thermal_had_changed(priv, status)) { |
| rcar_thermal_irq_disable(priv); |
| queue_delayed_work(system_freezable_wq, &priv->work, |
| msecs_to_jiffies(300)); |
| } |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * platform functions |
| */ |
| static int rcar_thermal_remove(struct platform_device *pdev) |
| { |
| struct rcar_thermal_common *common = platform_get_drvdata(pdev); |
| struct device *dev = &pdev->dev; |
| struct rcar_thermal_priv *priv; |
| |
| rcar_thermal_for_each_priv(priv, common) { |
| rcar_thermal_irq_disable(priv); |
| cancel_delayed_work_sync(&priv->work); |
| if (priv->chip->use_of_thermal) |
| thermal_remove_hwmon_sysfs(priv->zone); |
| else |
| thermal_zone_device_unregister(priv->zone); |
| } |
| |
| pm_runtime_put(dev); |
| pm_runtime_disable(dev); |
| |
| return 0; |
| } |
| |
| static int rcar_thermal_probe(struct platform_device *pdev) |
| { |
| struct rcar_thermal_common *common; |
| struct rcar_thermal_priv *priv; |
| struct device *dev = &pdev->dev; |
| struct resource *res, *irq; |
| const struct rcar_thermal_chip *chip = of_device_get_match_data(dev); |
| int mres = 0; |
| int i; |
| int ret = -ENODEV; |
| int idle = IDLE_INTERVAL; |
| u32 enr_bits = 0; |
| |
| common = devm_kzalloc(dev, sizeof(*common), GFP_KERNEL); |
| if (!common) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, common); |
| |
| INIT_LIST_HEAD(&common->head); |
| spin_lock_init(&common->lock); |
| common->dev = dev; |
| |
| pm_runtime_enable(dev); |
| pm_runtime_get_sync(dev); |
| |
| for (i = 0; i < chip->nirqs; i++) { |
| irq = platform_get_resource(pdev, IORESOURCE_IRQ, i); |
| if (!irq) |
| continue; |
| if (!common->base) { |
| /* |
| * platform has IRQ support. |
| * Then, driver uses common registers |
| * rcar_has_irq_support() will be enabled |
| */ |
| res = platform_get_resource(pdev, IORESOURCE_MEM, |
| mres++); |
| common->base = devm_ioremap_resource(dev, res); |
| if (IS_ERR(common->base)) |
| return PTR_ERR(common->base); |
| |
| idle = 0; /* polling delay is not needed */ |
| } |
| |
| ret = devm_request_irq(dev, irq->start, rcar_thermal_irq, |
| IRQF_SHARED, dev_name(dev), common); |
| if (ret) { |
| dev_err(dev, "irq request failed\n "); |
| goto error_unregister; |
| } |
| |
| /* update ENR bits */ |
| if (chip->irq_per_ch) |
| enr_bits |= 1 << i; |
| } |
| |
| for (i = 0;; i++) { |
| res = platform_get_resource(pdev, IORESOURCE_MEM, mres++); |
| if (!res) |
| break; |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) { |
| ret = -ENOMEM; |
| goto error_unregister; |
| } |
| |
| priv->base = devm_ioremap_resource(dev, res); |
| if (IS_ERR(priv->base)) { |
| ret = PTR_ERR(priv->base); |
| goto error_unregister; |
| } |
| |
| priv->common = common; |
| priv->id = i; |
| priv->chip = chip; |
| mutex_init(&priv->lock); |
| INIT_LIST_HEAD(&priv->list); |
| INIT_DELAYED_WORK(&priv->work, rcar_thermal_work); |
| ret = rcar_thermal_update_temp(priv); |
| if (ret < 0) |
| goto error_unregister; |
| |
| if (chip->use_of_thermal) |
| priv->zone = devm_thermal_zone_of_sensor_register( |
| dev, i, priv, |
| &rcar_thermal_zone_of_ops); |
| else |
| priv->zone = thermal_zone_device_register( |
| "rcar_thermal", |
| 1, 0, priv, |
| &rcar_thermal_zone_ops, NULL, 0, |
| idle); |
| if (IS_ERR(priv->zone)) { |
| dev_err(dev, "can't register thermal zone\n"); |
| ret = PTR_ERR(priv->zone); |
| priv->zone = NULL; |
| goto error_unregister; |
| } |
| |
| if (chip->use_of_thermal) { |
| /* |
| * thermal_zone doesn't enable hwmon as default, |
| * but, enable it here to keep compatible |
| */ |
| priv->zone->tzp->no_hwmon = false; |
| ret = thermal_add_hwmon_sysfs(priv->zone); |
| if (ret) |
| goto error_unregister; |
| } |
| |
| rcar_thermal_irq_enable(priv); |
| |
| list_move_tail(&priv->list, &common->head); |
| |
| /* update ENR bits */ |
| if (!chip->irq_per_ch) |
| enr_bits |= 3 << (i * 8); |
| } |
| |
| if (common->base && enr_bits) |
| rcar_thermal_common_write(common, ENR, enr_bits); |
| |
| dev_info(dev, "%d sensor probed\n", i); |
| |
| return 0; |
| |
| error_unregister: |
| rcar_thermal_remove(pdev); |
| |
| return ret; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int rcar_thermal_suspend(struct device *dev) |
| { |
| struct rcar_thermal_common *common = dev_get_drvdata(dev); |
| struct rcar_thermal_priv *priv = list_first_entry(&common->head, |
| typeof(*priv), list); |
| |
| if (priv->chip->needs_suspend_resume) { |
| rcar_thermal_common_write(common, ENR, 0); |
| rcar_thermal_irq_disable(priv); |
| rcar_thermal_bset(priv, THSCR, CPCTL, 0); |
| } |
| |
| return 0; |
| } |
| |
| static int rcar_thermal_resume(struct device *dev) |
| { |
| struct rcar_thermal_common *common = dev_get_drvdata(dev); |
| struct rcar_thermal_priv *priv = list_first_entry(&common->head, |
| typeof(*priv), list); |
| int ret; |
| |
| if (priv->chip->needs_suspend_resume) { |
| ret = rcar_thermal_update_temp(priv); |
| if (ret < 0) |
| return ret; |
| rcar_thermal_irq_enable(priv); |
| rcar_thermal_common_write(common, ENR, 0x03); |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(rcar_thermal_pm_ops, rcar_thermal_suspend, |
| rcar_thermal_resume); |
| |
| static struct platform_driver rcar_thermal_driver = { |
| .driver = { |
| .name = "rcar_thermal", |
| .pm = &rcar_thermal_pm_ops, |
| .of_match_table = rcar_thermal_dt_ids, |
| }, |
| .probe = rcar_thermal_probe, |
| .remove = rcar_thermal_remove, |
| }; |
| module_platform_driver(rcar_thermal_driver); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("R-Car THS/TSC thermal sensor driver"); |
| MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>"); |