| # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/leds/rohm,bd2606mvv.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: ROHM BD2606MVV LED controller |
| |
| maintainers: |
| - Andreas Kemnade <andreas@kemnade.info> |
| |
| description: |
| The BD2606 MVV is a programmable LED controller connected via I2C that can |
| drive 6 separate lines. Each of them can be individually switched on and off, |
| but the brightness setting is shared between pairs of them. |
| |
| Datasheet is available at |
| https://fscdn.rohm.com/en/products/databook/datasheet/ic/power/led_driver/bd2606mvv_1-e.pdf |
| |
| properties: |
| compatible: |
| const: rohm,bd2606mvv |
| |
| reg: |
| maxItems: 1 |
| |
| "#address-cells": |
| const: 1 |
| |
| "#size-cells": |
| const: 0 |
| |
| enable-gpios: |
| maxItems: 1 |
| description: GPIO pin to enable/disable the device. |
| |
| patternProperties: |
| "^led@[0-5]$": |
| type: object |
| $ref: common.yaml# |
| unevaluatedProperties: false |
| |
| properties: |
| reg: |
| minimum: 0 |
| maximum: 5 |
| |
| required: |
| - reg |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/leds/common.h> |
| |
| i2c { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| led-controller@66 { |
| compatible = "rohm,bd2606mvv"; |
| reg = <0x66>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| led@0 { |
| reg = <0x0>; |
| color = <LED_COLOR_ID_RED>; |
| function = LED_FUNCTION_POWER; |
| }; |
| |
| led@2 { |
| reg = <0x2>; |
| color = <LED_COLOR_ID_WHITE>; |
| function = LED_FUNCTION_STATUS; |
| }; |
| }; |
| }; |
| |
| ... |
