| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd |
| * Author: Tony Xie <tony.xie@rock-chips.com> |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/regmap.h> |
| #include <linux/suspend.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/regulator/machine.h> |
| |
| #include <asm/cacheflush.h> |
| #include <asm/tlbflush.h> |
| #include <asm/suspend.h> |
| |
| #include "pm.h" |
| |
| /* These enum are option of low power mode */ |
| enum { |
| ROCKCHIP_ARM_OFF_LOGIC_NORMAL = 0, |
| ROCKCHIP_ARM_OFF_LOGIC_DEEP = 1, |
| }; |
| |
| struct rockchip_pm_data { |
| const struct platform_suspend_ops *ops; |
| int (*init)(struct device_node *np); |
| }; |
| |
| static void __iomem *rk3288_bootram_base; |
| static phys_addr_t rk3288_bootram_phy; |
| |
| static struct regmap *pmu_regmap; |
| static struct regmap *sgrf_regmap; |
| static struct regmap *grf_regmap; |
| |
| static u32 rk3288_pmu_pwr_mode_con; |
| static u32 rk3288_sgrf_soc_con0; |
| static u32 rk3288_sgrf_cpu_con0; |
| |
| static inline u32 rk3288_l2_config(void) |
| { |
| u32 l2ctlr; |
| |
| asm("mrc p15, 1, %0, c9, c0, 2" : "=r" (l2ctlr)); |
| return l2ctlr; |
| } |
| |
| static void __init rk3288_config_bootdata(void) |
| { |
| rkpm_bootdata_cpusp = rk3288_bootram_phy + (SZ_4K - 8); |
| rkpm_bootdata_cpu_code = __pa_symbol(cpu_resume); |
| |
| rkpm_bootdata_l2ctlr_f = 1; |
| rkpm_bootdata_l2ctlr = rk3288_l2_config(); |
| } |
| |
| #define GRF_UOC0_CON0 0x320 |
| #define GRF_UOC1_CON0 0x334 |
| #define GRF_UOC2_CON0 0x348 |
| #define GRF_SIDDQ BIT(13) |
| |
| static bool rk3288_slp_disable_osc(void) |
| { |
| static const u32 reg_offset[] = { GRF_UOC0_CON0, GRF_UOC1_CON0, |
| GRF_UOC2_CON0 }; |
| u32 reg, i; |
| |
| /* |
| * if any usb phy is still on(GRF_SIDDQ==0), that means we need the |
| * function of usb wakeup, so do not switch to 32khz, since the usb phy |
| * clk does not connect to 32khz osc |
| */ |
| for (i = 0; i < ARRAY_SIZE(reg_offset); i++) { |
| regmap_read(grf_regmap, reg_offset[i], ®); |
| if (!(reg & GRF_SIDDQ)) |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static void rk3288_slp_mode_set(int level) |
| { |
| u32 mode_set, mode_set1; |
| bool osc_disable = rk3288_slp_disable_osc(); |
| |
| regmap_read(sgrf_regmap, RK3288_SGRF_CPU_CON0, &rk3288_sgrf_cpu_con0); |
| regmap_read(sgrf_regmap, RK3288_SGRF_SOC_CON0, &rk3288_sgrf_soc_con0); |
| |
| regmap_read(pmu_regmap, RK3288_PMU_PWRMODE_CON, |
| &rk3288_pmu_pwr_mode_con); |
| |
| /* |
| * SGRF_FAST_BOOT_EN - system to boot from FAST_BOOT_ADDR |
| * PCLK_WDT_GATE - disable WDT during suspend. |
| */ |
| regmap_write(sgrf_regmap, RK3288_SGRF_SOC_CON0, |
| SGRF_PCLK_WDT_GATE | SGRF_FAST_BOOT_EN |
| | SGRF_PCLK_WDT_GATE_WRITE | SGRF_FAST_BOOT_EN_WRITE); |
| |
| /* |
| * The dapswjdp can not auto reset before resume, that cause it may |
| * access some illegal address during resume. Let's disable it before |
| * suspend, and the MASKROM will enable it back. |
| */ |
| regmap_write(sgrf_regmap, RK3288_SGRF_CPU_CON0, SGRF_DAPDEVICEEN_WRITE); |
| |
| /* booting address of resuming system is from this register value */ |
| regmap_write(sgrf_regmap, RK3288_SGRF_FAST_BOOT_ADDR, |
| rk3288_bootram_phy); |
| |
| mode_set = BIT(PMU_GLOBAL_INT_DISABLE) | BIT(PMU_L2FLUSH_EN) | |
| BIT(PMU_SREF0_ENTER_EN) | BIT(PMU_SREF1_ENTER_EN) | |
| BIT(PMU_DDR0_GATING_EN) | BIT(PMU_DDR1_GATING_EN) | |
| BIT(PMU_PWR_MODE_EN) | BIT(PMU_CHIP_PD_EN) | |
| BIT(PMU_SCU_EN); |
| |
| mode_set1 = BIT(PMU_CLR_CORE) | BIT(PMU_CLR_CPUP); |
| |
| if (level == ROCKCHIP_ARM_OFF_LOGIC_DEEP) { |
| /* arm off, logic deep sleep */ |
| mode_set |= BIT(PMU_BUS_PD_EN) | BIT(PMU_PMU_USE_LF) | |
| BIT(PMU_DDR1IO_RET_EN) | BIT(PMU_DDR0IO_RET_EN) | |
| BIT(PMU_ALIVE_USE_LF) | BIT(PMU_PLL_PD_EN); |
| |
| if (osc_disable) |
| mode_set |= BIT(PMU_OSC_24M_DIS); |
| |
| mode_set1 |= BIT(PMU_CLR_ALIVE) | BIT(PMU_CLR_BUS) | |
| BIT(PMU_CLR_PERI) | BIT(PMU_CLR_DMA); |
| |
| regmap_write(pmu_regmap, RK3288_PMU_WAKEUP_CFG1, |
| PMU_ARMINT_WAKEUP_EN); |
| |
| /* |
| * In deep suspend we use PMU_PMU_USE_LF to let the rk3288 |
| * switch its main clock supply to the alternative 32kHz |
| * source. Therefore set 30ms on a 32kHz clock for pmic |
| * stabilization. Similar 30ms on 24MHz for the other |
| * mode below. |
| */ |
| regmap_write(pmu_regmap, RK3288_PMU_STABL_CNT, 32 * 30); |
| |
| /* only wait for stabilization, if we turned the osc off */ |
| regmap_write(pmu_regmap, RK3288_PMU_OSC_CNT, |
| osc_disable ? 32 * 30 : 0); |
| } else { |
| /* |
| * arm off, logic normal |
| * if pmu_clk_core_src_gate_en is not set, |
| * wakeup will be error |
| */ |
| mode_set |= BIT(PMU_CLK_CORE_SRC_GATE_EN); |
| |
| regmap_write(pmu_regmap, RK3288_PMU_WAKEUP_CFG1, |
| PMU_ARMINT_WAKEUP_EN | PMU_GPIOINT_WAKEUP_EN); |
| |
| /* 30ms on a 24MHz clock for pmic stabilization */ |
| regmap_write(pmu_regmap, RK3288_PMU_STABL_CNT, 24000 * 30); |
| |
| /* oscillator is still running, so no need to wait */ |
| regmap_write(pmu_regmap, RK3288_PMU_OSC_CNT, 0); |
| } |
| |
| regmap_write(pmu_regmap, RK3288_PMU_PWRMODE_CON, mode_set); |
| regmap_write(pmu_regmap, RK3288_PMU_PWRMODE_CON1, mode_set1); |
| } |
| |
| static void rk3288_slp_mode_set_resume(void) |
| { |
| regmap_write(sgrf_regmap, RK3288_SGRF_CPU_CON0, |
| rk3288_sgrf_cpu_con0 | SGRF_DAPDEVICEEN_WRITE); |
| |
| regmap_write(pmu_regmap, RK3288_PMU_PWRMODE_CON, |
| rk3288_pmu_pwr_mode_con); |
| |
| regmap_write(sgrf_regmap, RK3288_SGRF_SOC_CON0, |
| rk3288_sgrf_soc_con0 | SGRF_PCLK_WDT_GATE_WRITE |
| | SGRF_FAST_BOOT_EN_WRITE); |
| } |
| |
| static int rockchip_lpmode_enter(unsigned long arg) |
| { |
| flush_cache_all(); |
| |
| cpu_do_idle(); |
| |
| pr_err("%s: Failed to suspend\n", __func__); |
| |
| return 1; |
| } |
| |
| static int rk3288_suspend_enter(suspend_state_t state) |
| { |
| local_fiq_disable(); |
| |
| rk3288_slp_mode_set(ROCKCHIP_ARM_OFF_LOGIC_NORMAL); |
| |
| cpu_suspend(0, rockchip_lpmode_enter); |
| |
| rk3288_slp_mode_set_resume(); |
| |
| local_fiq_enable(); |
| |
| return 0; |
| } |
| |
| static int rk3288_suspend_prepare(void) |
| { |
| return regulator_suspend_prepare(PM_SUSPEND_MEM); |
| } |
| |
| static void rk3288_suspend_finish(void) |
| { |
| if (regulator_suspend_finish()) |
| pr_err("%s: Suspend finish failed\n", __func__); |
| } |
| |
| static int __init rk3288_suspend_init(struct device_node *np) |
| { |
| struct device_node *sram_np; |
| struct resource res; |
| int ret; |
| |
| pmu_regmap = syscon_node_to_regmap(np); |
| if (IS_ERR(pmu_regmap)) { |
| pr_err("%s: could not find pmu regmap\n", __func__); |
| return PTR_ERR(pmu_regmap); |
| } |
| |
| sgrf_regmap = syscon_regmap_lookup_by_compatible( |
| "rockchip,rk3288-sgrf"); |
| if (IS_ERR(sgrf_regmap)) { |
| pr_err("%s: could not find sgrf regmap\n", __func__); |
| return PTR_ERR(sgrf_regmap); |
| } |
| |
| grf_regmap = syscon_regmap_lookup_by_compatible( |
| "rockchip,rk3288-grf"); |
| if (IS_ERR(grf_regmap)) { |
| pr_err("%s: could not find grf regmap\n", __func__); |
| return PTR_ERR(grf_regmap); |
| } |
| |
| sram_np = of_find_compatible_node(NULL, NULL, |
| "rockchip,rk3288-pmu-sram"); |
| if (!sram_np) { |
| pr_err("%s: could not find bootram dt node\n", __func__); |
| return -ENODEV; |
| } |
| |
| rk3288_bootram_base = of_iomap(sram_np, 0); |
| if (!rk3288_bootram_base) { |
| pr_err("%s: could not map bootram base\n", __func__); |
| of_node_put(sram_np); |
| return -ENOMEM; |
| } |
| |
| ret = of_address_to_resource(sram_np, 0, &res); |
| if (ret) { |
| pr_err("%s: could not get bootram phy addr\n", __func__); |
| of_node_put(sram_np); |
| return ret; |
| } |
| rk3288_bootram_phy = res.start; |
| |
| of_node_put(sram_np); |
| |
| rk3288_config_bootdata(); |
| |
| /* copy resume code and data to bootsram */ |
| memcpy(rk3288_bootram_base, rockchip_slp_cpu_resume, |
| rk3288_bootram_sz); |
| |
| return 0; |
| } |
| |
| static const struct platform_suspend_ops rk3288_suspend_ops = { |
| .enter = rk3288_suspend_enter, |
| .valid = suspend_valid_only_mem, |
| .prepare = rk3288_suspend_prepare, |
| .finish = rk3288_suspend_finish, |
| }; |
| |
| static const struct rockchip_pm_data rk3288_pm_data __initconst = { |
| .ops = &rk3288_suspend_ops, |
| .init = rk3288_suspend_init, |
| }; |
| |
| static const struct of_device_id rockchip_pmu_of_device_ids[] __initconst = { |
| { |
| .compatible = "rockchip,rk3288-pmu", |
| .data = &rk3288_pm_data, |
| }, |
| { /* sentinel */ }, |
| }; |
| |
| void __init rockchip_suspend_init(void) |
| { |
| const struct rockchip_pm_data *pm_data; |
| const struct of_device_id *match; |
| struct device_node *np; |
| int ret; |
| |
| np = of_find_matching_node_and_match(NULL, rockchip_pmu_of_device_ids, |
| &match); |
| if (!match) { |
| pr_err("Failed to find PMU node\n"); |
| goto out_put; |
| } |
| pm_data = (struct rockchip_pm_data *) match->data; |
| |
| if (pm_data->init) { |
| ret = pm_data->init(np); |
| |
| if (ret) { |
| pr_err("%s: matches init error %d\n", __func__, ret); |
| goto out_put; |
| } |
| } |
| |
| suspend_set_ops(pm_data->ops); |
| |
| out_put: |
| of_node_put(np); |
| } |