| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2018-2019 NXP |
| * Dong Aisheng <aisheng.dong@nxp.com> |
| */ |
| |
| #include <dt-bindings/clock/imx8-lpcg.h> |
| #include <dt-bindings/firmware/imx/rsrc.h> |
| |
| conn_axi_clk: clock-conn-axi { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <333333333>; |
| clock-output-names = "conn_axi_clk"; |
| }; |
| |
| conn_ahb_clk: clock-conn-ahb { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <166666666>; |
| clock-output-names = "conn_ahb_clk"; |
| }; |
| |
| conn_ipg_clk: clock-conn-ipg { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <83333333>; |
| clock-output-names = "conn_ipg_clk"; |
| }; |
| |
| conn_subsys: bus@5b000000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x5b000000 0x0 0x5b000000 0x1000000>; |
| |
| usbotg1: usb@5b0d0000 { |
| compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb", "fsl,imx27-usb"; |
| reg = <0x5b0d0000 0x200>; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; |
| fsl,usbphy = <&usbphy1>; |
| fsl,usbmisc = <&usbmisc1 0>; |
| clocks = <&usb2_lpcg 0>; |
| ahb-burst-config = <0x0>; |
| tx-burst-size-dword = <0x10>; |
| rx-burst-size-dword = <0x10>; |
| power-domains = <&pd IMX_SC_R_USB_0>; |
| status = "disabled"; |
| }; |
| |
| usbmisc1: usbmisc@5b0d0200 { |
| #index-cells = <1>; |
| compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; |
| reg = <0x5b0d0200 0x200>; |
| }; |
| |
| usbphy1: usbphy@5b100000 { |
| compatible = "fsl,imx7ulp-usbphy"; |
| reg = <0x5b100000 0x1000>; |
| clocks = <&usb2_lpcg 1>; |
| power-domains = <&pd IMX_SC_R_USB_0_PHY>; |
| status = "disabled"; |
| }; |
| |
| usdhc1: mmc@5b010000 { |
| interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x5b010000 0x10000>; |
| clocks = <&sdhc0_lpcg IMX_LPCG_CLK_4>, |
| <&sdhc0_lpcg IMX_LPCG_CLK_0>, |
| <&sdhc0_lpcg IMX_LPCG_CLK_5>; |
| clock-names = "ipg", "ahb", "per"; |
| power-domains = <&pd IMX_SC_R_SDHC_0>; |
| status = "disabled"; |
| }; |
| |
| usdhc2: mmc@5b020000 { |
| interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x5b020000 0x10000>; |
| clocks = <&sdhc1_lpcg IMX_LPCG_CLK_4>, |
| <&sdhc1_lpcg IMX_LPCG_CLK_0>, |
| <&sdhc1_lpcg IMX_LPCG_CLK_5>; |
| clock-names = "ipg", "ahb", "per"; |
| power-domains = <&pd IMX_SC_R_SDHC_1>; |
| fsl,tuning-start-tap = <20>; |
| fsl,tuning-step = <2>; |
| status = "disabled"; |
| }; |
| |
| usdhc3: mmc@5b030000 { |
| interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x5b030000 0x10000>; |
| clocks = <&sdhc2_lpcg IMX_LPCG_CLK_4>, |
| <&sdhc2_lpcg IMX_LPCG_CLK_0>, |
| <&sdhc2_lpcg IMX_LPCG_CLK_5>; |
| clock-names = "ipg", "ahb", "per"; |
| power-domains = <&pd IMX_SC_R_SDHC_2>; |
| status = "disabled"; |
| }; |
| |
| fec1: ethernet@5b040000 { |
| reg = <0x5b040000 0x10000>; |
| interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&enet0_lpcg IMX_LPCG_CLK_4>, |
| <&enet0_lpcg IMX_LPCG_CLK_2>, |
| <&enet0_lpcg IMX_LPCG_CLK_3>, |
| <&enet0_lpcg IMX_LPCG_CLK_0>; |
| clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; |
| assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>, |
| <&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>; |
| assigned-clock-rates = <250000000>, <125000000>; |
| fsl,num-tx-queues = <3>; |
| fsl,num-rx-queues = <3>; |
| power-domains = <&pd IMX_SC_R_ENET_0>; |
| status = "disabled"; |
| }; |
| |
| fec2: ethernet@5b050000 { |
| reg = <0x5b050000 0x10000>; |
| interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&enet1_lpcg IMX_LPCG_CLK_4>, |
| <&enet1_lpcg IMX_LPCG_CLK_2>, |
| <&enet1_lpcg IMX_LPCG_CLK_3>, |
| <&enet1_lpcg IMX_LPCG_CLK_0>; |
| clock-names = "ipg", "ahb", "enet_clk_ref", "ptp"; |
| assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>, |
| <&clk IMX_SC_R_ENET_1 IMX_SC_C_CLKDIV>; |
| assigned-clock-rates = <250000000>, <125000000>; |
| fsl,num-tx-queues = <3>; |
| fsl,num-rx-queues = <3>; |
| power-domains = <&pd IMX_SC_R_ENET_1>; |
| status = "disabled"; |
| }; |
| |
| usbotg3: usb@5b110000 { |
| compatible = "fsl,imx8qm-usb3"; |
| reg = <0x5b110000 0x10000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| clocks = <&usb3_lpcg IMX_LPCG_CLK_1>, |
| <&usb3_lpcg IMX_LPCG_CLK_0>, |
| <&usb3_lpcg IMX_LPCG_CLK_7>, |
| <&usb3_lpcg IMX_LPCG_CLK_4>, |
| <&usb3_lpcg IMX_LPCG_CLK_5>; |
| clock-names = "lpm", "bus", "aclk", "ipg", "core"; |
| assigned-clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>; |
| assigned-clock-rates = <250000000>; |
| power-domains = <&pd IMX_SC_R_USB_2>; |
| status = "disabled"; |
| |
| usbotg3_cdns3: usb@5b120000 { |
| compatible = "cdns,usb3"; |
| reg = <0x5b120000 0x10000>, /* memory area for OTG/DRD registers */ |
| <0x5b130000 0x10000>, /* memory area for HOST registers */ |
| <0x5b140000 0x10000>; /* memory area for DEVICE registers */ |
| reg-names = "otg", "xhci", "dev"; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "host", "peripheral", "otg", "wakeup"; |
| phys = <&usb3_phy>; |
| phy-names = "cdns3,usb3-phy"; |
| cdns,on-chip-buff-size = /bits/ 16 <18>; |
| status = "disabled"; |
| }; |
| }; |
| |
| usb3_phy: usb-phy@5b160000 { |
| compatible = "nxp,salvo-phy"; |
| reg = <0x5b160000 0x40000>; |
| clocks = <&usb3_lpcg IMX_LPCG_CLK_6>; |
| clock-names = "salvo_phy_clk"; |
| power-domains = <&pd IMX_SC_R_USB_2_PHY>; |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| /* LPCG clocks */ |
| sdhc0_lpcg: clock-controller@5b200000 { |
| compatible = "fsl,imx8qxp-lpcg"; |
| reg = <0x5b200000 0x10000>; |
| #clock-cells = <1>; |
| clocks = <&clk IMX_SC_R_SDHC_0 IMX_SC_PM_CLK_PER>, |
| <&conn_ipg_clk>, <&conn_axi_clk>; |
| clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, |
| <IMX_LPCG_CLK_5>; |
| clock-output-names = "sdhc0_lpcg_per_clk", |
| "sdhc0_lpcg_ipg_clk", |
| "sdhc0_lpcg_ahb_clk"; |
| power-domains = <&pd IMX_SC_R_SDHC_0>; |
| }; |
| |
| sdhc1_lpcg: clock-controller@5b210000 { |
| compatible = "fsl,imx8qxp-lpcg"; |
| reg = <0x5b210000 0x10000>; |
| #clock-cells = <1>; |
| clocks = <&clk IMX_SC_R_SDHC_1 IMX_SC_PM_CLK_PER>, |
| <&conn_ipg_clk>, <&conn_axi_clk>; |
| clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, |
| <IMX_LPCG_CLK_5>; |
| clock-output-names = "sdhc1_lpcg_per_clk", |
| "sdhc1_lpcg_ipg_clk", |
| "sdhc1_lpcg_ahb_clk"; |
| power-domains = <&pd IMX_SC_R_SDHC_1>; |
| }; |
| |
| sdhc2_lpcg: clock-controller@5b220000 { |
| compatible = "fsl,imx8qxp-lpcg"; |
| reg = <0x5b220000 0x10000>; |
| #clock-cells = <1>; |
| clocks = <&clk IMX_SC_R_SDHC_2 IMX_SC_PM_CLK_PER>, |
| <&conn_ipg_clk>, <&conn_axi_clk>; |
| clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>, |
| <IMX_LPCG_CLK_5>; |
| clock-output-names = "sdhc2_lpcg_per_clk", |
| "sdhc2_lpcg_ipg_clk", |
| "sdhc2_lpcg_ahb_clk"; |
| power-domains = <&pd IMX_SC_R_SDHC_2>; |
| }; |
| |
| enet0_lpcg: clock-controller@5b230000 { |
| compatible = "fsl,imx8qxp-lpcg"; |
| reg = <0x5b230000 0x10000>; |
| #clock-cells = <1>; |
| clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>, |
| <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>, |
| <&conn_axi_clk>, |
| <&clk IMX_SC_R_ENET_0 IMX_SC_C_TXCLK>, |
| <&conn_ipg_clk>, |
| <&conn_ipg_clk>; |
| clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, |
| <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_3>, |
| <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>; |
| clock-output-names = "enet0_lpcg_timer_clk", |
| "enet0_lpcg_txc_sampling_clk", |
| "enet0_lpcg_ahb_clk", |
| "enet0_lpcg_rgmii_txc_clk", |
| "enet0_lpcg_ipg_clk", |
| "enet0_lpcg_ipg_s_clk"; |
| power-domains = <&pd IMX_SC_R_ENET_0>; |
| }; |
| |
| enet1_lpcg: clock-controller@5b240000 { |
| compatible = "fsl,imx8qxp-lpcg"; |
| reg = <0x5b240000 0x10000>; |
| #clock-cells = <1>; |
| clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>, |
| <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>, |
| <&conn_axi_clk>, |
| <&clk IMX_SC_R_ENET_1 IMX_SC_C_TXCLK>, |
| <&conn_ipg_clk>, |
| <&conn_ipg_clk>; |
| clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, |
| <IMX_LPCG_CLK_2>, <IMX_LPCG_CLK_3>, |
| <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>; |
| clock-output-names = "enet1_lpcg_timer_clk", |
| "enet1_lpcg_txc_sampling_clk", |
| "enet1_lpcg_ahb_clk", |
| "enet1_lpcg_rgmii_txc_clk", |
| "enet1_lpcg_ipg_clk", |
| "enet1_lpcg_ipg_s_clk"; |
| power-domains = <&pd IMX_SC_R_ENET_1>; |
| }; |
| |
| usb2_lpcg: clock-controller@5b270000 { |
| compatible = "fsl,imx8qxp-lpcg"; |
| reg = <0x5b270000 0x10000>; |
| #clock-cells = <1>; |
| clocks = <&conn_ahb_clk>, <&conn_ipg_clk>; |
| clock-indices = <IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>; |
| clock-output-names = "usboh3_ahb_clk", "usboh3_phy_ipg_clk"; |
| power-domains = <&pd IMX_SC_R_USB_0_PHY>; |
| }; |
| |
| usb3_lpcg: clock-controller@5b280000 { |
| compatible = "fsl,imx8qxp-lpcg"; |
| reg = <0x5b280000 0x10000>; |
| #clock-cells = <1>; |
| clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_1>, |
| <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>, |
| <IMX_LPCG_CLK_6>, <IMX_LPCG_CLK_7>; |
| clocks = <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_PER>, |
| <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MISC>, |
| <&conn_ipg_clk>, |
| <&conn_ipg_clk>, |
| <&conn_ipg_clk>, |
| <&clk IMX_SC_R_USB_2 IMX_SC_PM_CLK_MST_BUS>; |
| clock-output-names = "usb3_app_clk", |
| "usb3_lpm_clk", |
| "usb3_ipg_clk", |
| "usb3_core_pclk", |
| "usb3_phy_clk", |
| "usb3_aclk"; |
| power-domains = <&pd IMX_SC_R_USB_2_PHY>; |
| }; |
| }; |