| // SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
| /* |
| * Copyright 2021-2022 TQ-Systems GmbH |
| * Author: Alexander Stein <alexander.stein@tq-group.com> |
| */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/leds/common.h> |
| #include <dt-bindings/net/ti-dp83867.h> |
| #include <dt-bindings/phy/phy-imx8-pcie.h> |
| #include <dt-bindings/pwm/pwm.h> |
| #include "imx8mp-tqma8mpql.dtsi" |
| |
| / { |
| model = "TQ-Systems i.MX8MPlus TQMa8MPxL on MBa8MPxL"; |
| compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp"; |
| chassis-type = "embedded"; |
| |
| chosen { |
| stdout-path = &uart4; |
| }; |
| |
| iio-hwmon { |
| compatible = "iio-hwmon"; |
| io-channels = <&adc 0>, <&adc 1>; |
| }; |
| |
| aliases { |
| mmc0 = &usdhc3; |
| mmc1 = &usdhc2; |
| mmc2 = &usdhc1; |
| rtc0 = &pcf85063; |
| rtc1 = &snvs_rtc; |
| spi0 = &flexspi; |
| spi1 = &ecspi1; |
| spi2 = &ecspi2; |
| spi3 = &ecspi3; |
| }; |
| |
| backlight_lvds: backlight { |
| compatible = "pwm-backlight"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_backlight>; |
| pwms = <&pwm2 0 5000000 0>; |
| brightness-levels = <0 4 8 16 32 64 128 255>; |
| default-brightness-level = <7>; |
| power-supply = <®_vcc_12v0>; |
| enable-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; |
| status = "disabled"; |
| }; |
| |
| clk_xtal25: clk-xtal25 { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <25000000>; |
| }; |
| |
| connector { |
| compatible = "gpio-usb-b-connector", "usb-b-connector"; |
| type = "micro"; |
| label = "X29"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbcon0>; |
| id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; |
| |
| port { |
| usb_dr_connector: endpoint { |
| remote-endpoint = <&usb3_dwc>; |
| }; |
| }; |
| }; |
| |
| fan0: pwm-fan { |
| compatible = "pwm-fan"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwmfan>; |
| fan-supply = <®_pwm_fan>; |
| #cooling-cells = <2>; |
| /* typical 25 kHz -> 40.000 nsec */ |
| pwms = <&pwm3 0 40000 PWM_POLARITY_INVERTED>; |
| cooling-levels = <0 32 64 128 196 240>; |
| pulses-per-revolution = <2>; |
| interrupt-parent = <&gpio5>; |
| interrupts = <18 IRQ_TYPE_EDGE_FALLING>; |
| status = "disabled"; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpiobutton>; |
| autorepeat; |
| |
| switch-1 { |
| label = "S12"; |
| linux,code = <BTN_0>; |
| gpios = <&gpio5 27 GPIO_ACTIVE_LOW>; |
| wakeup-source; |
| }; |
| |
| switch-2 { |
| label = "S13"; |
| linux,code = <BTN_1>; |
| gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; |
| wakeup-source; |
| }; |
| }; |
| |
| gpio-leds { |
| compatible = "gpio-leds"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpioled>; |
| |
| led-0 { |
| color = <LED_COLOR_ID_GREEN>; |
| function = LED_FUNCTION_STATUS; |
| function-enumerator = <0>; |
| gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "default-on"; |
| }; |
| |
| led-1 { |
| color = <LED_COLOR_ID_GREEN>; |
| function = LED_FUNCTION_HEARTBEAT; |
| gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; |
| linux,default-trigger = "heartbeat"; |
| }; |
| |
| led-2 { |
| color = <LED_COLOR_ID_YELLOW>; |
| function = LED_FUNCTION_STATUS; |
| function-enumerator = <1>; |
| gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| |
| display: display { |
| /* |
| * Display is not fixed, so compatible has to be added from |
| * DT overlay |
| */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lvdsdisplay>; |
| power-supply = <®_vcc_3v3>; |
| enable-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; |
| backlight = <&backlight_lvds>; |
| status = "disabled"; |
| }; |
| |
| reg_pwm_fan: regulator-pwm-fan { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_regpwmfan>; |
| regulator-name = "FAN_PWR"; |
| regulator-min-microvolt = <12000000>; |
| regulator-max-microvolt = <12000000>; |
| gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| vin-supply = <®_vcc_12v0>; |
| }; |
| |
| reg_usdhc2_vmmc: regulator-usdhc2 { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; |
| regulator-name = "VSD_3V3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| startup-delay-us = <100>; |
| off-on-delay-us = <12000>; |
| }; |
| |
| reg_vcc_12v0: regulator-12v0 { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_reg12v0>; |
| regulator-name = "VCC_12V0"; |
| regulator-min-microvolt = <12000000>; |
| regulator-max-microvolt = <12000000>; |
| gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_vcc_1v8: regulator-1v8 { |
| compatible = "regulator-fixed"; |
| regulator-name = "VCC_1V8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| reg_vcc_3v3: regulator-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "VCC_3V3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| reg_vcc_5v0: regulator-5v0 { |
| compatible = "regulator-fixed"; |
| regulator-name = "VCC_5V0"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| ocram: ocram@900000 { |
| no-map; |
| reg = <0 0x900000 0 0x70000>; |
| }; |
| |
| /* global autoconfigured region for contiguous allocations */ |
| linux,cma { |
| compatible = "shared-dma-pool"; |
| reusable; |
| size = <0 0x38000000>; |
| alloc-ranges = <0 0x40000000 0 0xB0000000>; |
| linux,cma-default; |
| }; |
| }; |
| |
| sound { |
| compatible = "fsl,imx-audio-tlv320aic32x4"; |
| model = "tq-tlv320aic32x"; |
| audio-cpu = <&sai3>; |
| audio-codec = <&tlv320aic3x04>; |
| }; |
| |
| thermal-zones { |
| soc-thermal { |
| trips { |
| soc_active0: trip-active0 { |
| temperature = <40000>; |
| hysteresis = <5000>; |
| type = "active"; |
| }; |
| |
| soc_active1: trip-active1 { |
| temperature = <48000>; |
| hysteresis = <3000>; |
| type = "active"; |
| }; |
| |
| soc_active2: trip-active2 { |
| temperature = <60000>; |
| hysteresis = <10000>; |
| type = "active"; |
| }; |
| }; |
| |
| cooling-maps { |
| map1 { |
| trip = <&soc_active0>; |
| cooling-device = <&fan0 1 1>; |
| }; |
| |
| map2 { |
| trip = <&soc_active1>; |
| cooling-device = <&fan0 2 2>; |
| }; |
| |
| map3 { |
| trip = <&soc_active2>; |
| cooling-device = <&fan0 3 3>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| &ecspi1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi1>; |
| cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| }; |
| |
| &ecspi2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi2>; |
| cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| }; |
| |
| &ecspi3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi3>; |
| cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| |
| adc: adc@0 { |
| reg = <0>; |
| compatible = "microchip,mcp3202"; |
| /* 100 ksps * 18 */ |
| spi-max-frequency = <1800000>; |
| vref-supply = <®_vcc_3v3>; |
| #io-channel-cells = <1>; |
| }; |
| }; |
| |
| &eqos { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_eqos>, <&pinctrl_eqos_phy>; |
| phy-mode = "rgmii-id"; |
| phy-handle = <ðphy3>; |
| status = "okay"; |
| |
| mdio { |
| compatible = "snps,dwmac-mdio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethphy3: ethernet-phy@3 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| reg = <3>; |
| ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; |
| ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; |
| ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; |
| ti,dp83867-rxctrl-strap-quirk; |
| ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; |
| reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; |
| reset-assert-us = <500000>; |
| reset-deassert-us = <50000>; |
| enet-phy-lane-no-swap; |
| interrupt-parent = <&gpio4>; |
| interrupts = <3 IRQ_TYPE_EDGE_FALLING>; |
| }; |
| }; |
| }; |
| |
| &fec { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_fec>, <&pinctrl_fec_phy>; |
| phy-mode = "rgmii-id"; |
| phy-handle = <ðphy0>; |
| fsl,magic-packet; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethphy0: ethernet-phy@0 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| reg = <0>; |
| ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; |
| ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; |
| ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; |
| ti,dp83867-rxctrl-strap-quirk; |
| ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; |
| reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; |
| reset-assert-us = <500000>; |
| reset-deassert-us = <50000>; |
| enet-phy-lane-no-swap; |
| interrupt-parent = <&gpio4>; |
| interrupts = <1 IRQ_TYPE_EDGE_FALLING>; |
| }; |
| }; |
| }; |
| |
| &flexcan1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan1>; |
| xceiver-supply = <®_vcc_3v3>; |
| status = "okay"; |
| }; |
| |
| &flexcan2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan2>; |
| xceiver-supply = <®_vcc_3v3>; |
| status = "okay"; |
| }; |
| |
| &gpio1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio1>; |
| |
| gpio-line-names = "GPO1", "GPO0", "", "GPO3", |
| "", "", "GPO2", "GPI0", |
| "PMIC_IRQ", "GPI1", "OTG_ID", "USB_HUB_RST#", |
| "OTG_PWR", "", "GPI2", "GPI3", |
| "", "", "", "", |
| "", "", "", "", |
| "", "", "", "", |
| "", "", "", ""; |
| }; |
| |
| &gpio2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hoggpio2>; |
| |
| gpio-line-names = "", "", "", "", |
| "", "", "VCC12V_EN", "PERST#", |
| "", "", "CLKREQ#", "PEWAKE#", |
| "USDHC2_CD", "", "", "", |
| "", "", "", "V_SD3V3_EN", |
| "", "", "", "", |
| "", "", "", "", |
| "", "", "", ""; |
| |
| perst-hog { |
| gpio-hog; |
| gpios = <7 0>; |
| output-high; |
| line-name = "PERST#"; |
| }; |
| |
| clkreq-hog { |
| gpio-hog; |
| gpios = <10 0>; |
| input; |
| line-name = "CLKREQ#"; |
| }; |
| |
| pewake-hog { |
| gpio-hog; |
| gpios = <11 0>; |
| input; |
| line-name = "PEWAKE#"; |
| }; |
| }; |
| |
| &gpio3 { |
| gpio-line-names = "", "", "", "", |
| "", "", "", "", |
| "", "", "", "", |
| "", "", "LVDS0_RESET#", "", |
| "", "", "", "LVDS0_BLT_EN", |
| "LVDS0_PWR_EN", "", "", "", |
| "", "", "", "", |
| "", "", "", ""; |
| }; |
| |
| &gpio4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio4>; |
| |
| gpio-line-names = "ENET0_RST#", "ENET0_INT#", "ENET1_RST#", "ENET1_INT#", |
| "", "", "", "", |
| "", "", "", "", |
| "", "", "", "", |
| "", "", "DP_IRQ", "DSI_EN", |
| "HDMI_OC#", "TEMP_EVENT#", "PCIE_REFCLK_OE#", "", |
| "", "", "", "FAN_PWR", |
| "RTC_EVENT#", "CODEC_RST#", "", ""; |
| |
| pcie-refclkreq-hog { |
| gpio-hog; |
| gpios = <22 0>; |
| output-high; |
| line-name = "PCIE_REFCLK_OE#"; |
| }; |
| }; |
| |
| &gpio5 { |
| gpio-line-names = "", "", "", "LED2", |
| "LED1", "LED0", "CSI0_RESET#", "CSI0_SYNC", |
| "CSI0_TRIGGER", "CSI0_ENABLE", "", "", |
| "", "ECSPI2_SS0", "", "", |
| "", "", "", "", |
| "", "", "", "", |
| "", "ECSPI3_SS0", "SWITCH_A", "SWITCH_B", |
| "", "", "", ""; |
| }; |
| |
| &i2c2 { |
| clock-frequency = <384000>; |
| pinctrl-names = "default", "gpio"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| pinctrl-1 = <&pinctrl_i2c2_gpio>; |
| scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| status = "okay"; |
| |
| tlv320aic3x04: audio-codec@18 { |
| compatible = "ti,tlv320aic32x4"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_tlv320aic3x04>; |
| reg = <0x18>; |
| clock-names = "mclk"; |
| clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>; |
| reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>; |
| iov-supply = <®_vcc_1v8>; |
| ldoin-supply = <®_vcc_3v3>; |
| }; |
| |
| se97_1c: temperature-sensor@1c { |
| compatible = "nxp,se97b", "jedec,jc-42.4-temp"; |
| reg = <0x1c>; |
| }; |
| |
| at24c02_54: eeprom@54 { |
| compatible = "nxp,se97b", "atmel,24c02"; |
| reg = <0x54>; |
| pagesize = <16>; |
| vcc-supply = <®_vcc_3v3>; |
| }; |
| |
| pcieclk: clock-generator@6a { |
| compatible = "renesas,9fgv0241"; |
| reg = <0x6a>; |
| clocks = <&clk_xtal25>; |
| #clock-cells = <1>; |
| }; |
| }; |
| |
| &i2c4 { |
| clock-frequency = <384000>; |
| pinctrl-names = "default", "gpio"; |
| pinctrl-0 = <&pinctrl_i2c4>; |
| pinctrl-1 = <&pinctrl_i2c4_gpio>; |
| scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| status = "okay"; |
| }; |
| |
| &i2c6 { |
| clock-frequency = <384000>; |
| pinctrl-names = "default", "gpio"; |
| pinctrl-0 = <&pinctrl_i2c6>; |
| pinctrl-1 = <&pinctrl_i2c6_gpio>; |
| scl-gpios = <&gpio2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| sda-gpios = <&gpio2 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| status = "okay"; |
| }; |
| |
| &pcf85063 { |
| /* RTC_EVENT# is connected on MBa8MPxL */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pcf85063>; |
| interrupt-parent = <&gpio4>; |
| interrupts = <28 IRQ_TYPE_EDGE_FALLING>; |
| }; |
| |
| &pcie_phy { |
| fsl,clkreq-unsupported; |
| fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; |
| clocks = <&pcieclk 0>; |
| clock-names = "ref"; |
| status = "okay"; |
| }; |
| |
| &pcie { |
| clocks = <&clk IMX8MP_CLK_HSIO_ROOT>, |
| <&clk IMX8MP_CLK_HSIO_AXI>, |
| <&clk IMX8MP_CLK_PCIE_ROOT>; |
| clock-names = "pcie", "pcie_bus", "pcie_aux"; |
| assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>; |
| assigned-clock-rates = <10000000>; |
| assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>; |
| status = "okay"; |
| }; |
| |
| &pwm2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm2>; |
| status = "disabled"; |
| }; |
| |
| &pwm3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm3>; |
| status = "okay"; |
| }; |
| |
| &sai3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sai3>; |
| assigned-clocks = <&clk IMX8MP_CLK_SAI3>; |
| assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>; |
| assigned-clock-rates = <12288000>; |
| fsl,sai-mclk-direction-output; |
| status = "okay"; |
| }; |
| |
| &snvs_pwrkey { |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| assigned-clocks = <&clk IMX8MP_CLK_UART1>; |
| assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>; |
| status = "okay"; |
| }; |
| |
| &uart2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart2>; |
| assigned-clocks = <&clk IMX8MP_CLK_UART2>; |
| assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>; |
| status = "okay"; |
| }; |
| |
| &uart3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart3>; |
| assigned-clocks = <&clk IMX8MP_CLK_UART3>; |
| assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>; |
| status = "okay"; |
| }; |
| |
| &uart4 { |
| /* console */ |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart4>; |
| status = "okay"; |
| }; |
| |
| &usb3_0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usb0>; |
| fsl,over-current-active-low; |
| status = "okay"; |
| }; |
| |
| &usb3_1 { |
| fsl,disable-port-power-control; |
| fsl,permanently-attached; |
| status = "okay"; |
| }; |
| |
| &usb3_phy0 { |
| vbus-supply = <®_vcc_5v0>; |
| status = "okay"; |
| }; |
| |
| &usb3_phy1 { |
| vbus-supply = <®_vcc_5v0>; |
| status = "okay"; |
| }; |
| |
| &usb_dwc3_0 { |
| /* dual role is implemented, but not a full featured OTG */ |
| hnp-disable; |
| srp-disable; |
| adp-disable; |
| dr_mode = "otg"; |
| usb-role-switch; |
| role-switch-default-mode = "peripheral"; |
| status = "okay"; |
| |
| port { |
| usb3_dwc: endpoint { |
| remote-endpoint = <&usb_dr_connector>; |
| }; |
| }; |
| }; |
| |
| &usb_dwc3_1 { |
| dr_mode = "host"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbhub>; |
| status = "okay"; |
| |
| hub_2_0: hub@1 { |
| compatible = "usb451,8142"; |
| reg = <1>; |
| peer-hub = <&hub_3_0>; |
| reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; |
| vdd-supply = <®_vcc_3v3>; |
| }; |
| |
| hub_3_0: hub@2 { |
| compatible = "usb451,8140"; |
| reg = <2>; |
| peer-hub = <&hub_2_0>; |
| reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; |
| vdd-supply = <®_vcc_3v3>; |
| }; |
| }; |
| |
| &usdhc2 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; |
| pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; |
| pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; |
| cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; |
| vmmc-supply = <®_usdhc2_vmmc>; |
| no-mmc; |
| no-sdio; |
| disable-wp; |
| bus-width = <4>; |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl_backlight: backlightgrp { |
| fsl,pins = <MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x14>; |
| }; |
| |
| pinctrl_flexcan1: flexcan1grp { |
| fsl,pins = <MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX 0x150>, |
| <MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX 0x150>; |
| }; |
| |
| pinctrl_flexcan2: flexcan2grp { |
| fsl,pins = <MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x150>, |
| <MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x150>; |
| }; |
| |
| /* only on X57, primary used as CSI0 control signals */ |
| pinctrl_ecspi1: ecspi1grp { |
| fsl,pins = <MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x1c0>, |
| <MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x1c0>, |
| <MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x1c0>, |
| <MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x1c0>; |
| }; |
| |
| /* on X63 and optionally on X57, can also be used as CSI1 control signals */ |
| pinctrl_ecspi2: ecspi2grp { |
| fsl,pins = <MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x1c0>, |
| <MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x1c0>, |
| <MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x1c0>, |
| <MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x1c0>; |
| }; |
| |
| pinctrl_ecspi3: ecspi3grp { |
| fsl,pins = <MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI 0x1c0>, |
| <MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK 0x1c0>, |
| <MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO 0x1c0>, |
| <MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25 0x1c0>; |
| }; |
| |
| pinctrl_eqos: eqosgrp { |
| fsl,pins = <MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x40000044>, |
| <MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x40000044>, |
| <MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90>, |
| <MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90>, |
| <MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90>, |
| <MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90>, |
| <MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90>, |
| <MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90>, |
| <MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x12>, |
| <MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x12>, |
| <MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x12>, |
| <MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x12>, |
| <MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x12>, |
| <MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x14>; |
| }; |
| |
| pinctrl_eqos_event: eqosevtgrp { |
| fsl,pins = <MX8MP_IOMUXC_SAI2_RXD0__ENET_QOS_1588_EVENT2_OUT 0x100>, |
| <MX8MP_IOMUXC_SAI2_TXD0__ENET_QOS_1588_EVENT2_IN 0x1c0>; |
| }; |
| |
| pinctrl_eqos_phy: eqosphygrp { |
| fsl,pins = <MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x100>, |
| <MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x1c0>; |
| }; |
| |
| pinctrl_fec: fecgrp { |
| fsl,pins = <MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x40000044>, |
| <MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x40000044>, |
| <MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x90>, |
| <MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x90>, |
| <MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x90>, |
| <MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x90>, |
| <MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x90>, |
| <MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x90>, |
| <MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x12>, |
| <MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x12>, |
| <MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x12>, |
| <MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x12>, |
| <MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x12>, |
| <MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x14>; |
| }; |
| |
| pinctrl_fec_event: fecevtgrp { |
| fsl,pins = <MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN 0x100>, |
| <MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x1c0>; |
| }; |
| |
| pinctrl_fec_phy: fecphygrp { |
| fsl,pins = <MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x100>, |
| <MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x1c0>; |
| }; |
| |
| pinctrl_fec_phyalt: fecphyaltgrp { |
| fsl,pins = <MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24 0x180>, |
| <MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x180>; |
| }; |
| |
| pinctrl_gpiobutton: gpiobuttongrp { |
| fsl,pins = <MX8MP_IOMUXC_UART3_RXD__GPIO5_IO26 0x10>, |
| <MX8MP_IOMUXC_UART3_TXD__GPIO5_IO27 0x10>; |
| }; |
| |
| pinctrl_gpioled: gpioledgrp { |
| fsl,pins = <MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x14>, |
| <MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04 0x14>, |
| <MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03 0x14>; |
| }; |
| |
| pinctrl_gpio1: gpio1grp { |
| fsl,pins = <MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x10>, |
| <MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x10>, |
| <MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x10>, |
| <MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x10>, |
| <MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x80>, |
| <MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x80>, |
| <MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x80>, |
| <MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x80>; |
| }; |
| |
| pinctrl_gpio4: gpio4grp { |
| fsl,pins = <MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x180>, |
| <MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x180>; |
| }; |
| |
| pinctrl_hdmi: hdmigrp { |
| fsl,pins = <MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x400001c2>, |
| <MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x400001c2>, |
| <MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x40000010>, |
| <MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x40000010>; |
| }; |
| |
| pinctrl_hoggpio2: hoggpio2grp { |
| fsl,pins = <MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07 0x140>, |
| <MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x140>, |
| <MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x140>; |
| }; |
| |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001e2>, |
| <MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001e2>; |
| }; |
| |
| pinctrl_i2c2_gpio: i2c2-gpiogrp { |
| fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x400001e2>, |
| <MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x400001e2>; |
| }; |
| |
| pinctrl_i2c4: i2c4grp { |
| fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001e2>, |
| <MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001e2>; |
| }; |
| |
| pinctrl_i2c4_gpio: i2c4-gpiogrp { |
| fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20 0x400001e2>, |
| <MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21 0x400001e2>; |
| }; |
| |
| pinctrl_i2c6: i2c6grp { |
| fsl,pins = <MX8MP_IOMUXC_SD1_DATA0__I2C6_SCL 0x400001e2>, |
| <MX8MP_IOMUXC_SD1_DATA1__I2C6_SDA 0x400001e2>; |
| }; |
| |
| pinctrl_i2c6_gpio: i2c6-gpiogrp { |
| fsl,pins = <MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02 0x400001e2>, |
| <MX8MP_IOMUXC_SD1_DATA1__GPIO2_IO03 0x400001e2>; |
| }; |
| |
| pinctrl_lvdsdisplay: lvdsdisplaygrp { |
| fsl,pins = <MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x10>; /* Power enable */ |
| }; |
| |
| pinctrl_pcf85063: pcf85063grp { |
| fsl,pins = <MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x80>; |
| }; |
| |
| /* LVDS Backlight */ |
| pinctrl_pwm2: pwm2grp { |
| fsl,pins = <MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT 0x14>; |
| }; |
| |
| /* FAN */ |
| pinctrl_pwm3: pwm3grp { |
| fsl,pins = <MX8MP_IOMUXC_I2C3_SDA__PWM3_OUT 0x14>; |
| }; |
| |
| pinctrl_pwmfan: pwmfangrp { |
| fsl,pins = <MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x80>; /* FAN RPM */ |
| }; |
| |
| pinctrl_reg12v0: reg12v0grp { |
| fsl,pins = <MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x140>; /* VCC12V enable */ |
| }; |
| |
| pinctrl_regpwmfan: regpwmfangrp { |
| fsl,pins = <MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x80>; |
| }; |
| |
| pinctrl_sai3: sai3grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC 0x94 |
| MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0x94 |
| MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00 0x94 |
| MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0x94 |
| MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK 0x94 |
| >; |
| }; |
| |
| pinctrl_tlv320aic3x04: tlv320aic3x04grp { |
| fsl,pins = < |
| /* CODEC RST# */ |
| MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x180 |
| >; |
| }; |
| |
| /* X61 */ |
| pinctrl_uart1: uart1grp { |
| fsl,pins = <MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX 0x140>, |
| <MX8MP_IOMUXC_SD1_CMD__UART1_DCE_RX 0x140>; |
| }; |
| |
| /* X61 */ |
| pinctrl_uart2: uart2grp { |
| fsl,pins = <MX8MP_IOMUXC_SD1_DATA2__UART2_DCE_TX 0x140>, |
| <MX8MP_IOMUXC_SD1_DATA3__UART2_DCE_RX 0x140>; |
| }; |
| |
| pinctrl_uart3: uart3grp { |
| fsl,pins = <MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX 0x140>, |
| <MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX 0x140>; |
| }; |
| |
| pinctrl_uart4: uart4grp { |
| fsl,pins = <MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x140>, |
| <MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x140>; |
| }; |
| |
| pinctrl_usb0: usb0grp { |
| fsl,pins = <MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC 0x1c0>, |
| <MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR 0x1c0>; |
| }; |
| |
| pinctrl_usbcon0: usb0congrp { |
| fsl,pins = <MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x1c0>; |
| }; |
| |
| pinctrl_usbhub: usbhubgrp { |
| fsl,pins = <MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x10>; |
| }; |
| |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x192>, |
| <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d2>, |
| <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d2>, |
| <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d2>, |
| <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d2>, |
| <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d2>, |
| <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0>; |
| }; |
| |
| pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { |
| fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194>, |
| <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4>, |
| <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4>, |
| <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4>, |
| <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4>, |
| <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4>, |
| <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0>; |
| }; |
| |
| pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { |
| fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194>, |
| <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4>, |
| <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4>, |
| <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4>, |
| <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4>, |
| <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4>, |
| <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0>; |
| }; |
| |
| pinctrl_usdhc2_gpio: usdhc2-gpiogrp { |
| fsl,pins = <MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c0>; |
| }; |
| }; |
