blob: 22d81ace740a0f4ed8159b059282e20dacbf70c1 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* Unisoc SC9863A SoC DTS file
*
* Copyright (C) 2019, Unisoc Inc.
*/
#include <dt-bindings/clock/sprd,sc9863a-clk.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "sharkl3.dtsi"
/ {
cpus {
#address-cells = <2>;
#size-cells = <0>;
cpu-map {
cluster0 {
core0 {
cpu = <&CPU0>;
};
core1 {
cpu = <&CPU1>;
};
core2 {
cpu = <&CPU2>;
};
core3 {
cpu = <&CPU3>;
};
core4 {
cpu = <&CPU4>;
};
core5 {
cpu = <&CPU5>;
};
core6 {
cpu = <&CPU6>;
};
core7 {
cpu = <&CPU7>;
};
};
};
CPU0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a55";
reg = <0x0 0x0>;
enable-method = "psci";
cpu-idle-states = <&CORE_PD>;
};
CPU1: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a55";
reg = <0x0 0x100>;
enable-method = "psci";
cpu-idle-states = <&CORE_PD>;
};
CPU2: cpu@200 {
device_type = "cpu";
compatible = "arm,cortex-a55";
reg = <0x0 0x200>;
enable-method = "psci";
cpu-idle-states = <&CORE_PD>;
};
CPU3: cpu@300 {
device_type = "cpu";
compatible = "arm,cortex-a55";
reg = <0x0 0x300>;
enable-method = "psci";
cpu-idle-states = <&CORE_PD>;
};
CPU4: cpu@400 {
device_type = "cpu";
compatible = "arm,cortex-a55";
reg = <0x0 0x400>;
enable-method = "psci";
cpu-idle-states = <&CORE_PD>;
};
CPU5: cpu@500 {
device_type = "cpu";
compatible = "arm,cortex-a55";
reg = <0x0 0x500>;
enable-method = "psci";
cpu-idle-states = <&CORE_PD>;
};
CPU6: cpu@600 {
device_type = "cpu";
compatible = "arm,cortex-a55";
reg = <0x0 0x600>;
enable-method = "psci";
cpu-idle-states = <&CORE_PD>;
};
CPU7: cpu@700 {
device_type = "cpu";
compatible = "arm,cortex-a55";
reg = <0x0 0x700>;
enable-method = "psci";
cpu-idle-states = <&CORE_PD>;
};
};
idle-states {
entry-method = "psci";
CORE_PD: core-pd {
compatible = "arm,idle-state";
entry-latency-us = <4000>;
exit-latency-us = <4000>;
min-residency-us = <10000>;
local-timer-stop;
arm,psci-suspend-param = <0x00010000>;
};
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, /* Physical Secure PPI */
<GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, /* Physical Non-Secure PPI */
<GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, /* Virtual PPI */
<GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hipervisor PPI */
};
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
};
soc {
gic: interrupt-controller@14000000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
redistributor-stride = <0x0 0x20000>; /* 128KB stride */
#redistributor-regions = <1>;
interrupt-controller;
reg = <0x0 0x14000000 0 0x20000>, /* GICD */
<0x0 0x14040000 0 0x100000>; /* GICR */
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
ap_clk: clock-controller@21500000 {
compatible = "sprd,sc9863a-ap-clk";
reg = <0 0x21500000 0 0x1000>;
clocks = <&ext_32k>, <&ext_26m>;
clock-names = "ext-32k", "ext-26m";
#clock-cells = <1>;
};
aon_clk: clock-controller@402d0000 {
compatible = "sprd,sc9863a-aon-clk";
reg = <0 0x402d0000 0 0x1000>;
clocks = <&ext_26m>, <&rco_100m>,
<&ext_32k>, <&ext_4m>;
clock-names = "ext-26m", "rco-100m",
"ext-32k", "ext-4m";
#clock-cells = <1>;
};
mm_clk: clock-controller@60900000 {
compatible = "sprd,sc9863a-mm-clk";
reg = <0 0x60900000 0 0x1000>;
#clock-cells = <1>;
};
funnel@10001000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x10001000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
out-ports {
port {
funnel_soc_out_port: endpoint {
remote-endpoint = <&etb_in>;
};
};
};
in-ports {
port {
funnel_soc_in_port: endpoint {
remote-endpoint =
<&funnel_ca55_out_port>;
};
};
};
};
etb@10003000 {
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0 0x10003000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
in-ports {
port {
etb_in: endpoint {
remote-endpoint =
<&funnel_soc_out_port>;
};
};
};
};
funnel@12001000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x12001000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
out-ports {
port {
funnel_little_out_port: endpoint {
remote-endpoint =
<&etf_little_in>;
};
};
};
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
funnel_little_in_port0: endpoint {
remote-endpoint = <&etm0_out>;
};
};
port@1 {
reg = <1>;
funnel_little_in_port1: endpoint {
remote-endpoint = <&etm1_out>;
};
};
port@2 {
reg = <2>;
funnel_little_in_port2: endpoint {
remote-endpoint = <&etm2_out>;
};
};
port@3 {
reg = <3>;
funnel_little_in_port3: endpoint {
remote-endpoint = <&etm3_out>;
};
};
};
};
etf@12002000 {
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0 0x12002000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
out-ports {
port {
etf_little_out: endpoint {
remote-endpoint =
<&funnel_ca55_in_port0>;
};
};
};
in-port {
port {
etf_little_in: endpoint {
remote-endpoint =
<&funnel_little_out_port>;
};
};
};
};
etf@12003000 {
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0 0x12003000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
out-ports {
port {
etf_big_out: endpoint {
remote-endpoint =
<&funnel_ca55_in_port1>;
};
};
};
in-ports {
port {
etf_big_in: endpoint {
remote-endpoint =
<&funnel_big_out_port>;
};
};
};
};
funnel@12004000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x12004000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
out-ports {
port {
funnel_ca55_out_port: endpoint {
remote-endpoint =
<&funnel_soc_in_port>;
};
};
};
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
funnel_ca55_in_port0: endpoint {
remote-endpoint =
<&etf_little_out>;
};
};
port@1 {
reg = <1>;
funnel_ca55_in_port1: endpoint {
remote-endpoint =
<&etf_big_out>;
};
};
};
};
funnel@12005000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x12005000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
out-ports {
port {
funnel_big_out_port: endpoint {
remote-endpoint =
<&etf_big_in>;
};
};
};
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
funnel_big_in_port0: endpoint {
remote-endpoint = <&etm4_out>;
};
};
port@1 {
reg = <1>;
funnel_big_in_port1: endpoint {
remote-endpoint = <&etm5_out>;
};
};
port@2 {
reg = <2>;
funnel_big_in_port2: endpoint {
remote-endpoint = <&etm6_out>;
};
};
port@3 {
reg = <3>;
funnel_big_in_port3: endpoint {
remote-endpoint = <&etm7_out>;
};
};
};
};
etm@13040000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x13040000 0 0x1000>;
cpu = <&CPU0>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
out-ports {
port {
etm0_out: endpoint {
remote-endpoint =
<&funnel_little_in_port0>;
};
};
};
};
etm@13140000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x13140000 0 0x1000>;
cpu = <&CPU1>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
out-ports {
port {
etm1_out: endpoint {
remote-endpoint =
<&funnel_little_in_port1>;
};
};
};
};
etm@13240000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x13240000 0 0x1000>;
cpu = <&CPU2>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
out-ports {
port {
etm2_out: endpoint {
remote-endpoint =
<&funnel_little_in_port2>;
};
};
};
};
etm@13340000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x13340000 0 0x1000>;
cpu = <&CPU3>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
out-ports {
port {
etm3_out: endpoint {
remote-endpoint =
<&funnel_little_in_port3>;
};
};
};
};
etm@13440000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x13440000 0 0x1000>;
cpu = <&CPU4>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
out-ports {
port {
etm4_out: endpoint {
remote-endpoint =
<&funnel_big_in_port0>;
};
};
};
};
etm@13540000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x13540000 0 0x1000>;
cpu = <&CPU5>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
out-ports {
port {
etm5_out: endpoint {
remote-endpoint =
<&funnel_big_in_port1>;
};
};
};
};
etm@13640000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x13640000 0 0x1000>;
cpu = <&CPU6>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
out-ports {
port {
etm6_out: endpoint {
remote-endpoint =
<&funnel_big_in_port2>;
};
};
};
};
etm@13740000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0 0x13740000 0 0x1000>;
cpu = <&CPU7>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
out-ports {
port {
etm7_out: endpoint {
remote-endpoint =
<&funnel_big_in_port3>;
};
};
};
};
ap-ahb {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges;
sdio0: sdio@20300000 {
compatible = "sprd,sdhci-r11";
reg = <0 0x20300000 0 0x1000>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "sdio", "enable";
clocks = <&aon_clk CLK_SDIO0_2X>,
<&apahb_gate CLK_SDIO0_EB>;
assigned-clocks = <&aon_clk CLK_SDIO0_2X>;
assigned-clock-parents = <&rpll CLK_RPLL_390M>;
bus-width = <4>;
no-sdio;
no-mmc;
};
sdio3: sdio@20600000 {
compatible = "sprd,sdhci-r11";
reg = <0 0x20600000 0 0x1000>;
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "sdio", "enable";
clocks = <&aon_clk CLK_EMMC_2X>,
<&apahb_gate CLK_EMMC_EB>;
assigned-clocks = <&aon_clk CLK_EMMC_2X>;
assigned-clock-parents = <&rpll CLK_RPLL_390M>;
bus-width = <8>;
non-removable;
no-sdio;
no-sd;
cap-mmc-hw-reset;
};
};
};
};