blob: e3142ce531a097b8cf0e39251ba88ae143d6594c [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only
#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/kconfig-language.rst.
#
config 64BIT
bool
config 32BIT
bool
config RISCV
def_bool y
select ACPI_GENERIC_GSI if ACPI
select ACPI_REDUCED_HARDWARE_ONLY if ACPI
select ARCH_DMA_DEFAULT_COHERENT
select ARCH_ENABLE_HUGEPAGE_MIGRATION if HUGETLB_PAGE && MIGRATION
select ARCH_ENABLE_SPLIT_PMD_PTLOCK if PGTABLE_LEVELS > 2
select ARCH_ENABLE_THP_MIGRATION if TRANSPARENT_HUGEPAGE
select ARCH_HAS_BINFMT_FLAT
select ARCH_HAS_CURRENT_STACK_POINTER
select ARCH_HAS_DEBUG_VIRTUAL if MMU
select ARCH_HAS_DEBUG_VM_PGTABLE
select ARCH_HAS_DEBUG_WX
select ARCH_HAS_FORTIFY_SOURCE
select ARCH_HAS_GCOV_PROFILE_ALL
select ARCH_HAS_GIGANTIC_PAGE
select ARCH_HAS_KCOV
select ARCH_HAS_MMIOWB
select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
select ARCH_HAS_PMEM_API
select ARCH_HAS_PTE_SPECIAL
select ARCH_HAS_SET_DIRECT_MAP if MMU
select ARCH_HAS_SET_MEMORY if MMU
select ARCH_HAS_STRICT_KERNEL_RWX if MMU && !XIP_KERNEL
select ARCH_HAS_STRICT_MODULE_RWX if MMU && !XIP_KERNEL
select ARCH_HAS_SYSCALL_WRAPPER
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select ARCH_HAS_UBSAN_SANITIZE_ALL
select ARCH_HAS_VDSO_DATA
select ARCH_KEEP_MEMBLOCK if ACPI
select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX
select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT
select ARCH_STACKWALK
select ARCH_SUPPORTS_ATOMIC_RMW
select ARCH_SUPPORTS_CFI_CLANG
select ARCH_SUPPORTS_DEBUG_PAGEALLOC if MMU
select ARCH_SUPPORTS_HUGETLBFS if MMU
select ARCH_SUPPORTS_PAGE_TABLE_CHECK if MMU
select ARCH_SUPPORTS_PER_VMA_LOCK if MMU
select ARCH_SUPPORTS_SHADOW_CALL_STACK if HAVE_SHADOW_CALL_STACK
select ARCH_USE_MEMTEST
select ARCH_USE_QUEUED_RWLOCKS
select ARCH_USES_CFI_TRAPS if CFI_CLANG
select ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH if SMP && MMU
select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
select ARCH_WANT_FRAME_POINTERS
select ARCH_WANT_GENERAL_HUGETLB if !RISCV_ISA_SVNAPOT
select ARCH_WANT_HUGE_PMD_SHARE if 64BIT
select ARCH_WANT_LD_ORPHAN_WARN if !XIP_KERNEL
select ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP
select ARCH_WANTS_NO_INSTR
select ARCH_WANTS_THP_SWAP if HAVE_ARCH_TRANSPARENT_HUGEPAGE
select BINFMT_FLAT_NO_DATA_START_OFFSET if !MMU
select BUILDTIME_TABLE_SORT if MMU
select CLINT_TIMER if !MMU
select CLONE_BACKWARDS
select COMMON_CLK
select CPU_PM if CPU_IDLE || HIBERNATION || SUSPEND
select EDAC_SUPPORT
select FRAME_POINTER if PERF_EVENTS || (FUNCTION_TRACER && !DYNAMIC_FTRACE)
select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY if DYNAMIC_FTRACE
select GENERIC_ARCH_TOPOLOGY
select GENERIC_ATOMIC64 if !64BIT
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
select GENERIC_CPU_DEVICES
select GENERIC_EARLY_IOREMAP
select GENERIC_ENTRY
select GENERIC_GETTIMEOFDAY if HAVE_GENERIC_VDSO
select GENERIC_IDLE_POLL_SETUP
select GENERIC_IOREMAP if MMU
select GENERIC_IRQ_IPI if SMP
select GENERIC_IRQ_IPI_MUX if SMP
select GENERIC_IRQ_MULTI_HANDLER
select GENERIC_IRQ_SHOW
select GENERIC_IRQ_SHOW_LEVEL
select GENERIC_LIB_DEVMEM_IS_ALLOWED
select GENERIC_PCI_IOMAP
select GENERIC_PTDUMP if MMU
select GENERIC_SCHED_CLOCK
select GENERIC_SMP_IDLE_THREAD
select GENERIC_TIME_VSYSCALL if MMU && 64BIT
select GENERIC_VDSO_TIME_NS if HAVE_GENERIC_VDSO
select HARDIRQS_SW_RESEND
select HAS_IOPORT if MMU
select HAVE_ARCH_AUDITSYSCALL
select HAVE_ARCH_HUGE_VMALLOC if HAVE_ARCH_HUGE_VMAP
select HAVE_ARCH_HUGE_VMAP if MMU && 64BIT && !XIP_KERNEL
select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
select HAVE_ARCH_JUMP_LABEL_RELATIVE if !XIP_KERNEL
select HAVE_ARCH_KASAN if MMU && 64BIT
select HAVE_ARCH_KASAN_VMALLOC if MMU && 64BIT
select HAVE_ARCH_KFENCE if MMU && 64BIT
select HAVE_ARCH_KGDB if !XIP_KERNEL
select HAVE_ARCH_KGDB_QXFER_PKT
select HAVE_ARCH_MMAP_RND_BITS if MMU
select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT
select HAVE_ARCH_SECCOMP_FILTER
select HAVE_ARCH_THREAD_STRUCT_WHITELIST
select HAVE_ARCH_TRACEHOOK
select HAVE_ARCH_TRANSPARENT_HUGEPAGE if 64BIT && MMU
select HAVE_ARCH_USERFAULTFD_MINOR if 64BIT && USERFAULTFD
select HAVE_ARCH_VMAP_STACK if MMU && 64BIT
select HAVE_ASM_MODVERSIONS
select HAVE_CONTEXT_TRACKING_USER
select HAVE_DEBUG_KMEMLEAK
select HAVE_DMA_CONTIGUOUS if MMU
select HAVE_DYNAMIC_FTRACE if !XIP_KERNEL && MMU && (CLANG_SUPPORTS_DYNAMIC_FTRACE || GCC_SUPPORTS_DYNAMIC_FTRACE)
select HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE
select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_FUNCTION_GRAPH_RETVAL if HAVE_FUNCTION_GRAPH_TRACER
select HAVE_FUNCTION_TRACER if !XIP_KERNEL && !PREEMPTION
select HAVE_EBPF_JIT if MMU
select HAVE_FUNCTION_ARG_ACCESS_API
select HAVE_FUNCTION_ERROR_INJECTION
select HAVE_GCC_PLUGINS
select HAVE_GENERIC_VDSO if MMU && 64BIT
select HAVE_IRQ_TIME_ACCOUNTING
select HAVE_KPROBES if !XIP_KERNEL
select HAVE_KPROBES_ON_FTRACE if !XIP_KERNEL
select HAVE_KRETPROBES if !XIP_KERNEL
# https://github.com/ClangBuiltLinux/linux/issues/1881
select HAVE_LD_DEAD_CODE_DATA_ELIMINATION if !LD_IS_LLD
select HAVE_MOVE_PMD
select HAVE_MOVE_PUD
select HAVE_PCI
select HAVE_PERF_EVENTS
select HAVE_PERF_REGS
select HAVE_PERF_USER_STACK_DUMP
select HAVE_POSIX_CPU_TIMERS_TASK_WORK
select HAVE_PREEMPT_DYNAMIC_KEY if !XIP_KERNEL
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_RETHOOK if !XIP_KERNEL
select HAVE_RSEQ
select HAVE_SAMPLE_FTRACE_DIRECT
select HAVE_SAMPLE_FTRACE_DIRECT_MULTI
select HAVE_STACKPROTECTOR
select HAVE_SYSCALL_TRACEPOINTS
select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU
select IRQ_DOMAIN
select IRQ_FORCED_THREADING
select KASAN_VMALLOC if KASAN
select LOCK_MM_AND_FIND_VMA
select MODULES_USE_ELF_RELA if MODULES
select MODULE_SECTIONS if MODULES
select OF
select OF_EARLY_FLATTREE
select OF_IRQ
select PCI_DOMAINS_GENERIC if PCI
select PCI_MSI if PCI
select RISCV_ALTERNATIVE if !XIP_KERNEL
select RISCV_INTC
select RISCV_TIMER if RISCV_SBI
select SIFIVE_PLIC
select SPARSE_IRQ
select SYSCTL_EXCEPTION_TRACE
select THREAD_INFO_IN_TASK
select TRACE_IRQFLAGS_SUPPORT
select UACCESS_MEMCPY if !MMU
select ZONE_DMA32 if 64BIT
config CLANG_SUPPORTS_DYNAMIC_FTRACE
def_bool CC_IS_CLANG
# https://github.com/llvm/llvm-project/commit/6ab8927931851bb42b2c93a00801dc499d7d9b1e
depends on CLANG_VERSION >= 130000
# https://github.com/ClangBuiltLinux/linux/issues/1817
depends on AS_IS_GNU || (AS_IS_LLVM && (LD_IS_LLD || LD_VERSION >= 23600))
config GCC_SUPPORTS_DYNAMIC_FTRACE
def_bool CC_IS_GCC
depends on $(cc-option,-fpatchable-function-entry=8)
config HAVE_SHADOW_CALL_STACK
def_bool $(cc-option,-fsanitize=shadow-call-stack)
# https://github.com/riscv-non-isa/riscv-elf-psabi-doc/commit/a484e843e6eeb51f0cb7b8819e50da6d2444d769
depends on $(ld-option,--no-relax-gp)
config RISCV_USE_LINKER_RELAXATION
def_bool y
# https://github.com/llvm/llvm-project/commit/6611d58f5bbcbec77262d392e2923e1d680f6985
depends on !LD_IS_LLD || LLD_VERSION >= 150000
# https://github.com/llvm/llvm-project/commit/bbc0f99f3bc96f1db16f649fc21dd18e5b0918f6
config ARCH_HAS_BROKEN_DWARF5
def_bool y
depends on RISCV_USE_LINKER_RELAXATION
# https://github.com/llvm/llvm-project/commit/1df5ea29b43690b6622db2cad7b745607ca4de6a
depends on AS_IS_LLVM && AS_VERSION < 180000
# https://github.com/llvm/llvm-project/commit/7ffabb61a5569444b5ac9322e22e5471cc5e4a77
depends on LD_IS_LLD && LLD_VERSION < 180000
config ARCH_MMAP_RND_BITS_MIN
default 18 if 64BIT
default 8
config ARCH_MMAP_RND_COMPAT_BITS_MIN
default 8
# max bits determined by the following formula:
# VA_BITS - PAGE_SHIFT - 3
config ARCH_MMAP_RND_BITS_MAX
default 24 if 64BIT # SV39 based
default 17
config ARCH_MMAP_RND_COMPAT_BITS_MAX
default 17
# set if we run in machine mode, cleared if we run in supervisor mode
config RISCV_M_MODE
bool
default !MMU
# set if we are running in S-mode and can use SBI calls
config RISCV_SBI
bool
depends on !RISCV_M_MODE
default y
config MMU
bool "MMU-based Paged Memory Management Support"
default y
help
Select if you want MMU-based virtualised addressing space
support by paged memory management. If unsure, say 'Y'.
config PAGE_OFFSET
hex
default 0xC0000000 if 32BIT && MMU
default 0x80000000 if !MMU
default 0xff60000000000000 if 64BIT
config KASAN_SHADOW_OFFSET
hex
depends on KASAN_GENERIC
default 0xdfffffff00000000 if 64BIT
default 0xffffffff if 32BIT
config ARCH_FLATMEM_ENABLE
def_bool !NUMA
config ARCH_SPARSEMEM_ENABLE
def_bool y
depends on MMU
select SPARSEMEM_STATIC if 32BIT && SPARSEMEM
select SPARSEMEM_VMEMMAP_ENABLE if 64BIT
config ARCH_SELECT_MEMORY_MODEL
def_bool ARCH_SPARSEMEM_ENABLE
config ARCH_SUPPORTS_UPROBES
def_bool y
config STACKTRACE_SUPPORT
def_bool y
config GENERIC_BUG
def_bool y
depends on BUG
select GENERIC_BUG_RELATIVE_POINTERS if 64BIT
config GENERIC_BUG_RELATIVE_POINTERS
bool
config GENERIC_CALIBRATE_DELAY
def_bool y
config GENERIC_CSUM
def_bool y
config GENERIC_HWEIGHT
def_bool y
config FIX_EARLYCON_MEM
def_bool MMU
config PGTABLE_LEVELS
int
default 5 if 64BIT
default 2
config LOCKDEP_SUPPORT
def_bool y
config RISCV_DMA_NONCOHERENT
bool
select ARCH_HAS_DMA_PREP_COHERENT
select ARCH_HAS_SETUP_DMA_OPS
select ARCH_HAS_SYNC_DMA_FOR_CPU
select ARCH_HAS_SYNC_DMA_FOR_DEVICE
select DMA_BOUNCE_UNALIGNED_KMALLOC if SWIOTLB
config RISCV_NONSTANDARD_CACHE_OPS
bool
help
This enables function pointer support for non-standard noncoherent
systems to handle cache management.
config AS_HAS_INSN
def_bool $(as-instr,.insn r 51$(comma) 0$(comma) 0$(comma) t0$(comma) t0$(comma) zero)
config AS_HAS_OPTION_ARCH
# https://reviews.llvm.org/D123515
def_bool y
depends on $(as-instr, .option arch$(comma) +m)
source "arch/riscv/Kconfig.socs"
source "arch/riscv/Kconfig.errata"
menu "Platform type"
config NONPORTABLE
bool "Allow configurations that result in non-portable kernels"
help
RISC-V kernel binaries are compatible between all known systems
whenever possible, but there are some use cases that can only be
satisfied by configurations that result in kernel binaries that are
not portable between systems.
Selecting N does not guarantee kernels will be portable to all known
systems. Selecting any of the options guarded by NONPORTABLE will
result in kernel binaries that are unlikely to be portable between
systems.
If unsure, say N.
choice
prompt "Base ISA"
default ARCH_RV64I
help
This selects the base ISA that this kernel will target and must match
the target platform.
config ARCH_RV32I
bool "RV32I"
depends on NONPORTABLE
select 32BIT
select GENERIC_LIB_ASHLDI3
select GENERIC_LIB_ASHRDI3
select GENERIC_LIB_LSHRDI3
select GENERIC_LIB_UCMPDI2
config ARCH_RV64I
bool "RV64I"
select 64BIT
select ARCH_SUPPORTS_INT128 if CC_HAS_INT128
select SWIOTLB if MMU
endchoice
# We must be able to map all physical memory into the kernel, but the compiler
# is still a bit more efficient when generating code if it's setup in a manner
# such that it can only map 2GiB of memory.
choice
prompt "Kernel Code Model"
default CMODEL_MEDLOW if 32BIT
default CMODEL_MEDANY if 64BIT
config CMODEL_MEDLOW
bool "medium low code model"
config CMODEL_MEDANY
bool "medium any code model"
endchoice
config MODULE_SECTIONS
bool
select HAVE_MOD_ARCH_SPECIFIC
config SMP
bool "Symmetric Multi-Processing"
help
This enables support for systems with more than one CPU. If
you say N here, the kernel will run on single and
multiprocessor machines, but will use only one CPU of a
multiprocessor machine. If you say Y here, the kernel will run
on many, but not all, single processor machines. On a single
processor machine, the kernel will run faster if you say N
here.
If you don't know what to do here, say N.
config SCHED_MC
bool "Multi-core scheduler support"
depends on SMP
help
Multi-core scheduler support improves the CPU scheduler's decision
making when dealing with multi-core CPU chips at a cost of slightly
increased overhead in some places. If unsure say N here.
config NR_CPUS
int "Maximum number of CPUs (2-512)"
depends on SMP
range 2 512 if !RISCV_SBI_V01
range 2 32 if RISCV_SBI_V01 && 32BIT
range 2 64 if RISCV_SBI_V01 && 64BIT
default "32" if 32BIT
default "64" if 64BIT
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs"
depends on SMP
select GENERIC_IRQ_MIGRATION
help
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu.
Say N if you want to disable CPU hotplug.
choice
prompt "CPU Tuning"
default TUNE_GENERIC
config TUNE_GENERIC
bool "generic"
endchoice
# Common NUMA Features
config NUMA
bool "NUMA Memory Allocation and Scheduler Support"
depends on SMP && MMU
select ARCH_SUPPORTS_NUMA_BALANCING
select GENERIC_ARCH_NUMA
select HAVE_SETUP_PER_CPU_AREA
select NEED_PER_CPU_EMBED_FIRST_CHUNK
select NEED_PER_CPU_PAGE_FIRST_CHUNK
select OF_NUMA
select USE_PERCPU_NUMA_NODE_ID
help
Enable NUMA (Non-Uniform Memory Access) support.
The kernel will try to allocate memory used by a CPU on the
local memory of the CPU and add some more NUMA awareness to the kernel.
config NODES_SHIFT
int "Maximum NUMA Nodes (as a power of 2)"
range 1 10
default "2"
depends on NUMA
help
Specify the maximum number of NUMA Nodes available on the target
system. Increases memory reserved to accommodate various tables.
config RISCV_ALTERNATIVE
bool
depends on !XIP_KERNEL
help
This Kconfig allows the kernel to automatically patch the
erratum or cpufeature required by the execution platform at run
time. The code patching overhead is minimal, as it's only done
once at boot and once on each module load.
config RISCV_ALTERNATIVE_EARLY
bool
depends on RISCV_ALTERNATIVE
help
Allows early patching of the kernel for special errata
config RISCV_ISA_C
bool "Emit compressed instructions when building Linux"
default y
help
Adds "C" to the ISA subsets that the toolchain is allowed to emit
when building Linux, which results in compressed instructions in the
Linux binary.
If you don't know what to do here, say Y.
config RISCV_ISA_SVNAPOT
bool "Svnapot extension support for supervisor mode NAPOT pages"
depends on 64BIT && MMU
depends on RISCV_ALTERNATIVE
default y
help
Allow kernel to detect the Svnapot ISA-extension dynamically at boot
time and enable its usage.
The Svnapot extension is used to mark contiguous PTEs as a range
of contiguous virtual-to-physical translations for a naturally
aligned power-of-2 (NAPOT) granularity larger than the base 4KB page
size. When HUGETLBFS is also selected this option unconditionally
allocates some memory for each NAPOT page size supported by the kernel.
When optimizing for low memory consumption and for platforms without
the Svnapot extension, it may be better to say N here.
If you don't know what to do here, say Y.
config RISCV_ISA_SVPBMT
bool "Svpbmt extension support for supervisor mode page-based memory types"
depends on 64BIT && MMU
depends on RISCV_ALTERNATIVE
default y
help
Adds support to dynamically detect the presence of the Svpbmt
ISA-extension (Supervisor-mode: page-based memory types) and
enable its usage.
The memory type for a page contains a combination of attributes
that indicate the cacheability, idempotency, and ordering
properties for access to that page.
The Svpbmt extension is only available on 64-bit cpus.
If you don't know what to do here, say Y.
config TOOLCHAIN_HAS_V
bool
default y
depends on !64BIT || $(cc-option,-mabi=lp64 -march=rv64iv)
depends on !32BIT || $(cc-option,-mabi=ilp32 -march=rv32iv)
depends on LLD_VERSION >= 140000 || LD_VERSION >= 23800
depends on AS_HAS_OPTION_ARCH
config RISCV_ISA_V
bool "VECTOR extension support"
depends on TOOLCHAIN_HAS_V
depends on FPU
select DYNAMIC_SIGFRAME
default y
help
Say N here if you want to disable all vector related procedure
in the kernel.
If you don't know what to do here, say Y.
config RISCV_ISA_V_DEFAULT_ENABLE
bool "Enable userspace Vector by default"
depends on RISCV_ISA_V
default y
help
Say Y here if you want to enable Vector in userspace by default.
Otherwise, userspace has to make explicit prctl() call to enable
Vector, or enable it via the sysctl interface.
If you don't know what to do here, say Y.
config RISCV_ISA_V_UCOPY_THRESHOLD
int "Threshold size for vectorized user copies"
depends on RISCV_ISA_V
default 768
help
Prefer using vectorized copy_to_user()/copy_from_user() when the
workload size exceeds this value.
config RISCV_ISA_V_PREEMPTIVE
bool "Run kernel-mode Vector with kernel preemption"
depends on PREEMPTION
depends on RISCV_ISA_V
default y
help
Usually, in-kernel SIMD routines are run with preemption disabled.
Functions which envoke long running SIMD thus must yield core's
vector unit to prevent blocking other tasks for too long.
This config allows kernel to run SIMD without explicitly disable
preemption. Enabling this config will result in higher memory
consumption due to the allocation of per-task's kernel Vector context.
config TOOLCHAIN_HAS_ZBB
bool
default y
depends on !64BIT || $(cc-option,-mabi=lp64 -march=rv64ima_zbb)
depends on !32BIT || $(cc-option,-mabi=ilp32 -march=rv32ima_zbb)
depends on LLD_VERSION >= 150000 || LD_VERSION >= 23900
depends on AS_HAS_OPTION_ARCH
config RISCV_ISA_ZBB
bool "Zbb extension support for bit manipulation instructions"
depends on TOOLCHAIN_HAS_ZBB
depends on MMU
depends on RISCV_ALTERNATIVE
default y
help
Adds support to dynamically detect the presence of the ZBB
extension (basic bit manipulation) and enable its usage.
The Zbb extension provides instructions to accelerate a number
of bit-specific operations (count bit population, sign extending,
bitrotation, etc).
If you don't know what to do here, say Y.
config RISCV_ISA_ZICBOM
bool "Zicbom extension support for non-coherent DMA operation"
depends on MMU
depends on RISCV_ALTERNATIVE
default y
select RISCV_DMA_NONCOHERENT
select DMA_DIRECT_REMAP
help
Adds support to dynamically detect the presence of the ZICBOM
extension (Cache Block Management Operations) and enable its
usage.
The Zicbom extension can be used to handle for example
non-coherent DMA support on devices that need it.
If you don't know what to do here, say Y.
config RISCV_ISA_ZICBOZ
bool "Zicboz extension support for faster zeroing of memory"
depends on MMU
depends on RISCV_ALTERNATIVE
default y
help
Enable the use of the Zicboz extension (cbo.zero instruction)
when available.
The Zicboz extension is used for faster zeroing of memory.
If you don't know what to do here, say Y.
config TOOLCHAIN_HAS_ZIHINTPAUSE
bool
default y
depends on !64BIT || $(cc-option,-mabi=lp64 -march=rv64ima_zihintpause)
depends on !32BIT || $(cc-option,-mabi=ilp32 -march=rv32ima_zihintpause)
depends on LLD_VERSION >= 150000 || LD_VERSION >= 23600
config TOOLCHAIN_NEEDS_EXPLICIT_ZICSR_ZIFENCEI
def_bool y
# https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=aed44286efa8ae8717a77d94b51ac3614e2ca6dc
# https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=98416dbb0a62579d4a7a4a76bab51b5b52fec2cd
depends on AS_IS_GNU && AS_VERSION >= 23600
help
Binutils-2.38 and GCC-12.1.0 bumped the default ISA spec to the newer
20191213 version, which moves some instructions from the I extension to
the Zicsr and Zifencei extensions. This requires explicitly specifying
Zicsr and Zifencei when binutils >= 2.38 or GCC >= 12.1.0. Zicsr
and Zifencei are supported in binutils from version 2.36 onwards.
To make life easier, and avoid forcing toolchains that default to a
newer ISA spec to version 2.2, relax the check to binutils >= 2.36.
For clang < 17 or GCC < 11.3.0, for which this is not possible or need
special treatment, this is dealt with in TOOLCHAIN_NEEDS_OLD_ISA_SPEC.
config TOOLCHAIN_NEEDS_OLD_ISA_SPEC
def_bool y
depends on TOOLCHAIN_NEEDS_EXPLICIT_ZICSR_ZIFENCEI
# https://github.com/llvm/llvm-project/commit/22e199e6afb1263c943c0c0d4498694e15bf8a16
# https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=d29f5d6ab513c52fd872f532c492e35ae9fd6671
depends on (CC_IS_CLANG && CLANG_VERSION < 170000) || (CC_IS_GCC && GCC_VERSION < 110300)
help
Certain versions of clang and GCC do not support zicsr and zifencei via
-march. This option causes an older ISA spec compatible with these older
versions of clang and GCC to be passed to GAS, which has the same result
as passing zicsr and zifencei to -march.
config FPU
bool "FPU support"
default y
help
Say N here if you want to disable all floating-point related procedure
in the kernel.
If you don't know what to do here, say Y.
config IRQ_STACKS
bool "Independent irq & softirq stacks" if EXPERT
default y
select HAVE_IRQ_EXIT_ON_IRQ_STACK
select HAVE_SOFTIRQ_ON_OWN_STACK
help
Add independent irq & softirq stacks for percpu to prevent kernel stack
overflows. We may save some memory footprint by disabling IRQ_STACKS.
config THREAD_SIZE_ORDER
int "Kernel stack size (in power-of-two numbers of page size)" if VMAP_STACK && EXPERT
range 0 4
default 1 if 32BIT && !KASAN
default 3 if 64BIT && KASAN
default 2
help
Specify the Pages of thread stack size (from 4KB to 64KB), which also
affects irq stack size, which is equal to thread stack size.
config RISCV_MISALIGNED
bool "Support misaligned load/store traps for kernel and userspace"
select SYSCTL_ARCH_UNALIGN_ALLOW
default y
help
Say Y here if you want the kernel to embed support for misaligned
load/store for both kernel and userspace. When disable, misaligned
accesses will generate SIGBUS in userspace and panic in kernel.
config RISCV_EFFICIENT_UNALIGNED_ACCESS
bool "Assume the CPU supports fast unaligned memory accesses"
depends on NONPORTABLE
select DCACHE_WORD_ACCESS if MMU
select HAVE_EFFICIENT_UNALIGNED_ACCESS
help
Say Y here if you want the kernel to assume that the CPU supports
efficient unaligned memory accesses. When enabled, this option
improves the performance of the kernel on such CPUs. However, the
kernel will run much more slowly, or will not be able to run at all,
on CPUs that do not support efficient unaligned memory accesses.
If unsure what to do here, say N.
endmenu # "Platform type"
menu "Kernel features"
source "kernel/Kconfig.hz"
config RISCV_SBI_V01
bool "SBI v0.1 support"
depends on RISCV_SBI
help
This config allows kernel to use SBI v0.1 APIs. This will be
deprecated in future once legacy M-mode software are no longer in use.
config RISCV_BOOT_SPINWAIT
bool "Spinwait booting method"
depends on SMP
default y if RISCV_SBI_V01 || RISCV_M_MODE
help
This enables support for booting Linux via spinwait method. In the
spinwait method, all cores randomly jump to Linux. One of the cores
gets chosen via lottery and all other keep spinning on a percpu
variable. This method cannot support CPU hotplug and sparse hartid
scheme. It should be only enabled for M-mode Linux or platforms relying
on older firmware without SBI HSM extension. All other platforms should
rely on ordered booting via SBI HSM extension which gets chosen
dynamically at runtime if the firmware supports it.
Since spinwait is incompatible with sparse hart IDs, it requires
NR_CPUS be large enough to contain the physical hart ID of the first
hart to enter Linux.
If unsure what to do here, say N.
config ARCH_SUPPORTS_KEXEC
def_bool y
config ARCH_SELECTS_KEXEC
def_bool y
depends on KEXEC
select HOTPLUG_CPU if SMP
config ARCH_SUPPORTS_KEXEC_FILE
def_bool 64BIT
config ARCH_SELECTS_KEXEC_FILE
def_bool y
depends on KEXEC_FILE
select HAVE_IMA_KEXEC if IMA
select KEXEC_ELF
config ARCH_SUPPORTS_KEXEC_PURGATORY
def_bool ARCH_SUPPORTS_KEXEC_FILE
config ARCH_SUPPORTS_CRASH_DUMP
def_bool y
config ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION
def_bool CRASH_CORE
config COMPAT
bool "Kernel support for 32-bit U-mode"
default 64BIT
depends on 64BIT && MMU
help
This option enables support for a 32-bit U-mode running under a 64-bit
kernel at S-mode. riscv32-specific components such as system calls,
the user helper functions (vdso), signal rt_frame functions and the
ptrace interface are handled appropriately by the kernel.
If you want to execute 32-bit userspace applications, say Y.
config PARAVIRT
bool "Enable paravirtualization code"
depends on RISCV_SBI
help
This changes the kernel so it can modify itself when it is run
under a hypervisor, potentially improving performance significantly
over full virtualization.
config PARAVIRT_TIME_ACCOUNTING
bool "Paravirtual steal time accounting"
depends on PARAVIRT
help
Select this option to enable fine granularity task steal time
accounting. Time spent executing other tasks in parallel with
the current vCPU is discounted from the vCPU power. To account for
that, there can be a small performance impact.
If in doubt, say N here.
config RELOCATABLE
bool "Build a relocatable kernel"
depends on MMU && 64BIT && !XIP_KERNEL
help
This builds a kernel as a Position Independent Executable (PIE),
which retains all relocation metadata required to relocate the
kernel binary at runtime to a different virtual address than the
address it was linked at.
Since RISCV uses the RELA relocation format, this requires a
relocation pass at runtime even if the kernel is loaded at the
same address it was linked at.
If unsure, say N.
config RANDOMIZE_BASE
bool "Randomize the address of the kernel image"
select RELOCATABLE
depends on MMU && 64BIT && !XIP_KERNEL
help
Randomizes the virtual address at which the kernel image is
loaded, as a security feature that deters exploit attempts
relying on knowledge of the location of kernel internals.
It is the bootloader's job to provide entropy, by passing a
random u64 value in /chosen/kaslr-seed at kernel entry.
When booting via the UEFI stub, it will invoke the firmware's
EFI_RNG_PROTOCOL implementation (if available) to supply entropy
to the kernel proper. In addition, it will randomise the physical
location of the kernel Image as well.
If unsure, say N.
endmenu # "Kernel features"
menu "Boot options"
config CMDLINE
string "Built-in kernel command line"
help
For most platforms, the arguments for the kernel's command line
are provided at run-time, during boot. However, there are cases
where either no arguments are being provided or the provided
arguments are insufficient or even invalid.
When that occurs, it is possible to define a built-in command
line here and choose how the kernel should use it later on.
choice
prompt "Built-in command line usage" if CMDLINE != ""
default CMDLINE_FALLBACK
help
Choose how the kernel will handle the provided built-in command
line.
config CMDLINE_FALLBACK
bool "Use bootloader kernel arguments if available"
help
Use the built-in command line as fallback in case we get nothing
during boot. This is the default behaviour.
config CMDLINE_EXTEND
bool "Extend bootloader kernel arguments"
help
The command-line arguments provided during boot will be
appended to the built-in command line. This is useful in
cases where the provided arguments are insufficient and
you don't want to or cannot modify them.
config CMDLINE_FORCE
bool "Always use the default kernel command string"
help
Always use the built-in command line, even if we get one during
boot. This is useful in case you need to override the provided
command line on systems where you don't have or want control
over it.
endchoice
config EFI_STUB
bool
config EFI
bool "UEFI runtime support"
depends on OF && !XIP_KERNEL
depends on MMU
default y
select ARCH_SUPPORTS_ACPI if 64BIT
select EFI_GENERIC_STUB
select EFI_PARAMS_FROM_FDT
select EFI_RUNTIME_WRAPPERS
select EFI_STUB
select LIBFDT
select RISCV_ISA_C
select UCS2_STRING
help
This option provides support for runtime services provided
by UEFI firmware (such as non-volatile variables, realtime
clock, and platform reset). A UEFI stub is also provided to
allow the kernel to be booted as an EFI application. This
is only useful on systems that have UEFI firmware.
config CC_HAVE_STACKPROTECTOR_TLS
def_bool $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=tp -mstack-protector-guard-offset=0)
config STACKPROTECTOR_PER_TASK
def_bool y
depends on !RANDSTRUCT
depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_TLS
config PHYS_RAM_BASE_FIXED
bool "Explicitly specified physical RAM address"
depends on NONPORTABLE
default n
config PHYS_RAM_BASE
hex "Platform Physical RAM address"
depends on PHYS_RAM_BASE_FIXED
default "0x80000000"
help
This is the physical address of RAM in the system. It has to be
explicitly specified to run early relocations of read-write data
from flash to RAM.
config XIP_KERNEL
bool "Kernel Execute-In-Place from ROM"
depends on MMU && SPARSEMEM && NONPORTABLE
# This prevents XIP from being enabled by all{yes,mod}config, which
# fail to build since XIP doesn't support large kernels.
depends on !COMPILE_TEST
select PHYS_RAM_BASE_FIXED
help
Execute-In-Place allows the kernel to run from non-volatile storage
directly addressable by the CPU, such as NOR flash. This saves RAM
space since the text section of the kernel is not loaded from flash
to RAM. Read-write sections, such as the data section and stack,
are still copied to RAM. The XIP kernel is not compressed since
it has to run directly from flash, so it will take more space to
store it. The flash address used to link the kernel object files,
and for storing it, is configuration dependent. Therefore, if you
say Y here, you must know the proper physical address where to
store the kernel image depending on your own flash memory usage.
Also note that the make target becomes "make xipImage" rather than
"make zImage" or "make Image". The final kernel binary to put in
ROM memory will be arch/riscv/boot/xipImage.
SPARSEMEM is required because the kernel text and rodata that are
flash resident are not backed by memmap, then any attempt to get
a struct page on those regions will trigger a fault.
If unsure, say N.
config XIP_PHYS_ADDR
hex "XIP Kernel Physical Location"
depends on XIP_KERNEL
default "0x21000000"
help
This is the physical address in your flash memory the kernel will
be linked for and stored to. This address is dependent on your
own flash usage.
config RISCV_ISA_FALLBACK
bool "Permit falling back to parsing riscv,isa for extension support by default"
default y
help
Parsing the "riscv,isa" devicetree property has been deprecated and
replaced by a list of explicitly defined strings. For compatibility
with existing platforms, the kernel will fall back to parsing the
"riscv,isa" property if the replacements are not found.
Selecting N here will result in a kernel that does not use the
fallback, unless the commandline "riscv_isa_fallback" parameter is
present.
Please see the dt-binding, located at
Documentation/devicetree/bindings/riscv/extensions.yaml for details
on the replacement properties, "riscv,isa-base" and
"riscv,isa-extensions".
config BUILTIN_DTB
bool "Built-in device tree"
depends on OF && NONPORTABLE
default y if XIP_KERNEL
endmenu # "Boot options"
config PORTABLE
bool
default !NONPORTABLE
select EFI
select MMU
select OF
config ARCH_PROC_KCORE_TEXT
def_bool y
menu "Power management options"
source "kernel/power/Kconfig"
# Hibernation is only possible on systems where the SBI implementation has
# marked its reserved memory as not accessible from, or does not run
# from the same memory as, Linux
config ARCH_HIBERNATION_POSSIBLE
def_bool NONPORTABLE
config ARCH_HIBERNATION_HEADER
def_bool HIBERNATION
config ARCH_SUSPEND_POSSIBLE
def_bool y
endmenu # "Power management options"
menu "CPU Power Management"
source "drivers/cpuidle/Kconfig"
source "drivers/cpufreq/Kconfig"
endmenu # "CPU Power Management"
source "arch/riscv/kvm/Kconfig"
source "drivers/acpi/Kconfig"