| /* SPDX-License-Identifier: GPL-2.0 */ |
| #ifndef _BCACHEFS_ERROR_H |
| #define _BCACHEFS_ERROR_H |
| |
| #include <linux/list.h> |
| #include <linux/printk.h> |
| #include "sb-errors.h" |
| |
| struct bch_dev; |
| struct bch_fs; |
| struct work_struct; |
| |
| /* |
| * XXX: separate out errors that indicate on disk data is inconsistent, and flag |
| * superblock as such |
| */ |
| |
| /* Error messages: */ |
| |
| /* |
| * Inconsistency errors: The on disk data is inconsistent. If these occur during |
| * initial recovery, they don't indicate a bug in the running code - we walk all |
| * the metadata before modifying anything. If they occur at runtime, they |
| * indicate either a bug in the running code or (less likely) data is being |
| * silently corrupted under us. |
| * |
| * XXX: audit all inconsistent errors and make sure they're all recoverable, in |
| * BCH_ON_ERROR_CONTINUE mode |
| */ |
| |
| bool bch2_inconsistent_error(struct bch_fs *); |
| |
| void bch2_topology_error(struct bch_fs *); |
| |
| #define bch2_fs_inconsistent(c, ...) \ |
| ({ \ |
| bch_err(c, __VA_ARGS__); \ |
| bch2_inconsistent_error(c); \ |
| }) |
| |
| #define bch2_fs_inconsistent_on(cond, c, ...) \ |
| ({ \ |
| bool _ret = unlikely(!!(cond)); \ |
| \ |
| if (_ret) \ |
| bch2_fs_inconsistent(c, __VA_ARGS__); \ |
| _ret; \ |
| }) |
| |
| /* |
| * Later we might want to mark only the particular device inconsistent, not the |
| * entire filesystem: |
| */ |
| |
| #define bch2_dev_inconsistent(ca, ...) \ |
| do { \ |
| bch_err(ca, __VA_ARGS__); \ |
| bch2_inconsistent_error((ca)->fs); \ |
| } while (0) |
| |
| #define bch2_dev_inconsistent_on(cond, ca, ...) \ |
| ({ \ |
| bool _ret = unlikely(!!(cond)); \ |
| \ |
| if (_ret) \ |
| bch2_dev_inconsistent(ca, __VA_ARGS__); \ |
| _ret; \ |
| }) |
| |
| /* |
| * When a transaction update discovers or is causing a fs inconsistency, it's |
| * helpful to also dump the pending updates: |
| */ |
| #define bch2_trans_inconsistent(trans, ...) \ |
| ({ \ |
| bch_err(trans->c, __VA_ARGS__); \ |
| bch2_dump_trans_updates(trans); \ |
| bch2_inconsistent_error(trans->c); \ |
| }) |
| |
| #define bch2_trans_inconsistent_on(cond, trans, ...) \ |
| ({ \ |
| bool _ret = unlikely(!!(cond)); \ |
| \ |
| if (_ret) \ |
| bch2_trans_inconsistent(trans, __VA_ARGS__); \ |
| _ret; \ |
| }) |
| |
| /* |
| * Fsck errors: inconsistency errors we detect at mount time, and should ideally |
| * be able to repair: |
| */ |
| |
| struct fsck_err_state { |
| struct list_head list; |
| const char *fmt; |
| u64 nr; |
| bool ratelimited; |
| int ret; |
| int fix; |
| char *last_msg; |
| }; |
| |
| enum bch_fsck_flags { |
| FSCK_CAN_FIX = 1 << 0, |
| FSCK_CAN_IGNORE = 1 << 1, |
| FSCK_NEED_FSCK = 1 << 2, |
| FSCK_NO_RATELIMIT = 1 << 3, |
| }; |
| |
| #define fsck_err_count(_c, _err) bch2_sb_err_count(_c, BCH_FSCK_ERR_##_err) |
| |
| __printf(4, 5) __cold |
| int bch2_fsck_err(struct bch_fs *, |
| enum bch_fsck_flags, |
| enum bch_sb_error_id, |
| const char *, ...); |
| void bch2_flush_fsck_errs(struct bch_fs *); |
| |
| #define __fsck_err(c, _flags, _err_type, ...) \ |
| ({ \ |
| int _ret = bch2_fsck_err(c, _flags, BCH_FSCK_ERR_##_err_type, \ |
| __VA_ARGS__); \ |
| \ |
| if (_ret != -BCH_ERR_fsck_fix && \ |
| _ret != -BCH_ERR_fsck_ignore) { \ |
| ret = _ret; \ |
| goto fsck_err; \ |
| } \ |
| \ |
| _ret == -BCH_ERR_fsck_fix; \ |
| }) |
| |
| /* These macros return true if error should be fixed: */ |
| |
| /* XXX: mark in superblock that filesystem contains errors, if we ignore: */ |
| |
| #define __fsck_err_on(cond, c, _flags, _err_type, ...) \ |
| (unlikely(cond) ? __fsck_err(c, _flags, _err_type, __VA_ARGS__) : false) |
| |
| #define need_fsck_err_on(cond, c, _err_type, ...) \ |
| __fsck_err_on(cond, c, FSCK_CAN_IGNORE|FSCK_NEED_FSCK, _err_type, __VA_ARGS__) |
| |
| #define need_fsck_err(c, _err_type, ...) \ |
| __fsck_err(c, FSCK_CAN_IGNORE|FSCK_NEED_FSCK, _err_type, __VA_ARGS__) |
| |
| #define mustfix_fsck_err(c, _err_type, ...) \ |
| __fsck_err(c, FSCK_CAN_FIX, _err_type, __VA_ARGS__) |
| |
| #define mustfix_fsck_err_on(cond, c, _err_type, ...) \ |
| __fsck_err_on(cond, c, FSCK_CAN_FIX, _err_type, __VA_ARGS__) |
| |
| #define fsck_err(c, _err_type, ...) \ |
| __fsck_err(c, FSCK_CAN_FIX|FSCK_CAN_IGNORE, _err_type, __VA_ARGS__) |
| |
| #define fsck_err_on(cond, c, _err_type, ...) \ |
| __fsck_err_on(cond, c, FSCK_CAN_FIX|FSCK_CAN_IGNORE, _err_type, __VA_ARGS__) |
| |
| __printf(4, 0) |
| static inline void bch2_bkey_fsck_err(struct bch_fs *c, |
| struct printbuf *err_msg, |
| enum bch_sb_error_id err_type, |
| const char *fmt, ...) |
| { |
| va_list args; |
| |
| va_start(args, fmt); |
| prt_vprintf(err_msg, fmt, args); |
| va_end(args); |
| } |
| |
| #define bkey_fsck_err(c, _err_msg, _err_type, ...) \ |
| do { \ |
| prt_printf(_err_msg, __VA_ARGS__); \ |
| bch2_sb_error_count(c, BCH_FSCK_ERR_##_err_type); \ |
| ret = -BCH_ERR_invalid_bkey; \ |
| goto fsck_err; \ |
| } while (0) |
| |
| #define bkey_fsck_err_on(cond, ...) \ |
| do { \ |
| if (unlikely(cond)) \ |
| bkey_fsck_err(__VA_ARGS__); \ |
| } while (0) |
| |
| /* |
| * Fatal errors: these don't indicate a bug, but we can't continue running in RW |
| * mode - pretty much just due to metadata IO errors: |
| */ |
| |
| void bch2_fatal_error(struct bch_fs *); |
| |
| #define bch2_fs_fatal_error(c, ...) \ |
| do { \ |
| bch_err(c, __VA_ARGS__); \ |
| bch2_fatal_error(c); \ |
| } while (0) |
| |
| #define bch2_fs_fatal_err_on(cond, c, ...) \ |
| ({ \ |
| bool _ret = unlikely(!!(cond)); \ |
| \ |
| if (_ret) \ |
| bch2_fs_fatal_error(c, __VA_ARGS__); \ |
| _ret; \ |
| }) |
| |
| /* |
| * IO errors: either recoverable metadata IO (because we have replicas), or data |
| * IO - we need to log it and print out a message, but we don't (necessarily) |
| * want to shut down the fs: |
| */ |
| |
| void bch2_io_error_work(struct work_struct *); |
| |
| /* Does the error handling without logging a message */ |
| void bch2_io_error(struct bch_dev *, enum bch_member_error_type); |
| |
| #define bch2_dev_io_err_on(cond, ca, _type, ...) \ |
| ({ \ |
| bool _ret = (cond); \ |
| \ |
| if (_ret) { \ |
| bch_err_dev_ratelimited(ca, __VA_ARGS__); \ |
| bch2_io_error(ca, _type); \ |
| } \ |
| _ret; \ |
| }) |
| |
| #define bch2_dev_inum_io_err_on(cond, ca, _type, ...) \ |
| ({ \ |
| bool _ret = (cond); \ |
| \ |
| if (_ret) { \ |
| bch_err_inum_offset_ratelimited(ca, __VA_ARGS__); \ |
| bch2_io_error(ca, _type); \ |
| } \ |
| _ret; \ |
| }) |
| |
| #endif /* _BCACHEFS_ERROR_H */ |