blob: 620fd20434a58d6a6aba2777b77a146ad2863c9f [file] [log] [blame]
What: /sys/bus/platform/devices/INT3407:00/dptf_power/charger_type
Date: Jul, 2016
KernelVersion: v4.10
Contact: linux-acpi@vger.kernel.org
Description:
(RO) The charger type - Traditional, Hybrid or NVDC.
What: /sys/bus/platform/devices/INT3407:00/dptf_power/adapter_rating_mw
Date: Jul, 2016
KernelVersion: v4.10
Contact: linux-acpi@vger.kernel.org
Description:
(RO) Adapter rating in milliwatts (the maximum Adapter power).
Must be 0 if no AC Adaptor is plugged in.
What: /sys/bus/platform/devices/INT3407:00/dptf_power/max_platform_power_mw
Date: Jul, 2016
KernelVersion: v4.10
Contact: linux-acpi@vger.kernel.org
Description:
(RO) Maximum platform power that can be supported by the battery
in milliwatts.
What: /sys/bus/platform/devices/INT3407:00/dptf_power/platform_power_source
Date: Jul, 2016
KernelVersion: v4.10
Contact: linux-acpi@vger.kernel.org
Description:
(RO) Display the platform power source
========= ============================
bits[3:0] Current power source
- 0x00 = DC
- 0x01 = AC
- 0x02 = USB
- 0x03 = Wireless Charger
bits[7:4] Power source sequence number
========= ============================
What: /sys/bus/platform/devices/INT3407:00/dptf_power/battery_steady_power
Date: Jul, 2016
KernelVersion: v4.10
Contact: linux-acpi@vger.kernel.org
Description:
(RO) The maximum sustained power for battery in milliwatts.
What: /sys/bus/platform/devices/INT3407:00/dptf_power/rest_of_platform_power_mw
Date: June, 2020
KernelVersion: v5.8
Contact: linux-acpi@vger.kernel.org
Description:
(RO) Shows the rest (outside of SoC) of worst-case platform power.
What: /sys/bus/platform/devices/INT3407:00/dptf_power/prochot_confirm
Date: June, 2020
KernelVersion: v5.8
Contact: linux-acpi@vger.kernel.org
Description:
(WO) Confirm embedded controller about a prochot notification.
What: /sys/bus/platform/devices/INT3532:00/dptf_battery/max_platform_power_mw
Date: June, 2020
KernelVersion: v5.8
Contact: linux-acpi@vger.kernel.org
Description:
(RO) The maximum platform power that can be supported by the battery in milli watts.
What: /sys/bus/platform/devices/INT3532:00/dptf_battery/max_steady_state_power_mw
Date: June, 2020
KernelVersion: v5.8
Contact: linux-acpi@vger.kernel.org
Description:
(RO) The maximum sustained power for battery in milli watts.
What: /sys/bus/platform/devices/INT3532:00/dptf_battery/high_freq_impedance_mohm
Date: June, 2020
KernelVersion: v5.8
Contact: linux-acpi@vger.kernel.org
Description:
(RO) The high frequency impedance value that can be obtained from battery
fuel gauge in milli Ohms.
What: /sys/bus/platform/devices/INT3532:00/dptf_battery/no_load_voltage_mv
Date: June, 2020
KernelVersion: v5.8
Contact: linux-acpi@vger.kernel.org
Description:
(RO) The no-load voltage that can be obtained from battery fuel gauge in
milli volts.
What: /sys/bus/platform/devices/INT3532:00/dptf_battery/current_discharge_capbility_ma
Date: June, 2020
KernelVersion: v5.8
Contact: linux-acpi@vger.kernel.org
Description:
(RO) The battery discharge current capability obtained from battery fuel gauge in
milli Amps.
What: /sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/freq_mhz_low_clock
Date: November, 2020
KernelVersion: v5.10
Contact: linux-acpi@vger.kernel.org
Description:
(RW) The PCH FIVR (Fully Integrated Voltage Regulator) switching frequency in MHz,
when FIVR clock is 19.2MHz or 24MHz.
What: /sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/freq_mhz_high_clock
Date: November, 2020
KernelVersion: v5.10
Contact: linux-acpi@vger.kernel.org
Description:
(RW) The PCH FIVR (Fully Integrated Voltage Regulator) switching frequency in MHz,
when FIVR clock is 38.4MHz.
What: /sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/fivr_switching_freq_mhz
Date: September, 2021
KernelVersion: v5.15
Contact: linux-acpi@vger.kernel.org
Description:
(RO) Get the FIVR switching control frequency in MHz.
What: /sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/fivr_switching_fault_status
Date: September, 2021
KernelVersion: v5.15
Contact: linux-acpi@vger.kernel.org
Description:
(RO) Read the FIVR switching frequency control fault status.
What: /sys/bus/platform/devices/INTC1045:00/pch_fivr_switch_frequency/ssc_clock_info
Date: September, 2021
KernelVersion: v5.15
Contact: linux-acpi@vger.kernel.org
Description:
(RO) Presents SSC (spread spectrum clock) information for EMI
(Electro magnetic interference) control. This is a bit mask.
======= ==========================================
Bits Description
======= ==========================================
[7:0] Sets clock spectrum spread percentage:
0x00=0.2% , 0x3F=10%
1 LSB = 0.1% increase in spread (for
settings 0x01 thru 0x1C)
1 LSB = 0.2% increase in spread (for
settings 0x1E thru 0x3F)
[8] When set to 1, enables spread
spectrum clock
[9] 0: Triangle mode. FFC frequency
walks around the Fcenter in a linear
fashion
1: Random walk mode. FFC frequency
changes randomly within the SSC
(Spread spectrum clock) range
[10] 0: No white noise. 1: Add white noise
to spread waveform
[11] When 1, future writes are ignored.
======= ==========================================