| /**************************************************************************** |
| |
| global project definition file |
| |
| 12.06.1998 -rs |
| 11.02.2002 r.d. Erweiterungen, Ergaenzungen |
| 20.08.2002 SYS TEC electronic -as |
| Definition Schluesselwort 'GENERIC' |
| fuer das Erzeugen von Generic Pointer |
| 28.08.2002 r.d. erweiterter SYS TEC Debug Code |
| 16.09.2002 r.d. komplette Uebersetzung in Englisch |
| 11.04.2003 f.j. Ergaenzung fuer Mitsubishi NC30 Compiler |
| 17.06.2003 -rs Definition von Basistypen in <#ifndef _WINDEF_> gesetzt |
| 16.04.2004 r.d. Ergaenzung fuer Borland C++ Builder |
| 30.08.2004 -rs TRACE5 eingefügt |
| 23.12.2005 d.k. Definitions for IAR compiler |
| |
| $Id: global.h,v 1.6 2008/11/07 13:55:56 D.Krueger Exp $ |
| |
| ****************************************************************************/ |
| |
| #ifndef _GLOBAL_H_ |
| #define _GLOBAL_H_ |
| |
| |
| //--------------------------------------------------------------------------- |
| // elements of defines for development system |
| //--------------------------------------------------------------------------- |
| |
| // these defines are necessary to check some of characteristics of the development system |
| #define _DEV_BIGEND_ 0x80000000L // big endian (motorolla format) |
| #define _DEV_ALIGNMENT_4_ 0x00400000L // the CPU needs alignment of 4 bytes |
| #define _DEV_ONLY_INT_MAIN_ 0x00004000L // the compiler needs "int main(int)" instead of "void main(void)" |
| #define _DEV_COMMA_EXT_ 0x00002000L // support of last comma in struct predefinition |
| #define _DEV_64BIT_SUPPORT_ 0x00001000L // support of 64 bit operations |
| #define _DEV_BIT64_ 0x00000400L // count of bits: 64 bit |
| #define _DEV_BIT32_ 0x00000300L // 32 bit |
| #define _DEV_BIT16_ 0x00000200L // 16 bit |
| #define _DEV_BIT8_ 0x00000100L // 8 bit |
| #define _DEV_RVCT_ARM_ 0x0000001CL // RealView ARM |
| #define _DEV_RENESASM32C 0x0000001BL // compiler from: Renesas |
| #define _DEV_GNUC_MIPS2_ 0x0000001AL // GNU for MIPS2 |
| #define _DEV_MPLAB_C30_ 0x00000019L // MPLAB C30 for Microchip dsPIC33F series |
| #define _DEV_GNUC_TC_ 0x00000018L // GNU for Infineon TriCore |
| #define _DEV_GNUC_X86_ 0x00000017L // GNU for I386 |
| #define _DEV_IAR_ARM_ 0x00000016L // ARM IAR C/C++ Compiler |
| #define _DEV_PARADGM_X86 0x00000015L // Paradigm C/C++ for Beck 1x3 |
| #define _DEV_GNUC_CF_ 0x00000014L // GNU for Coldfire |
| #define _DEV_KEIL_ARM_ 0x00000013L // Keil ARM |
| #define _DEV_MSEVC_ 0x00000012L // Microsoft embedded Visual C/C++ |
| #define _DEV_HIGHTEC_GNUC_X86_ 0x00000011L // Hightec elf386 gcc |
| #define _DEV_MSVC_RTX_ 0x00000010L // VC600 + RTX |
| #define _DEV_MSVC_V1_5_ 0x0000000FL // Microsoft Visual C/C++ V1.5 |
| #define _DEV_GNUC_ARM7_ 0x0000000EL // GNU Compiler gcc for ARM7 |
| #define _DEV_METROWERKS_CW_ 0x0000000DL // Metrowerks Code Warrior |
| #define _DEV_MITSUBISHIM16C_ 0x0000000CL //compiler from: Mitsubishi |
| #define _DEV_GNUC_C16X_ 0x0000000BL // GNU Compiler gcc166 for Infineon C16x |
| #define _DEV_LINUX_GCC_ 0x0000000AL // Linux GNU Compiler gcc |
| #define _DEV_GNUC_MPC5X5 0x00000009L // GNU for Motorola PPC5x5 |
| #define _DEV_TASKINGM16C_ 0x00000008L // Tasking for Mitsubishi M16C |
| #define _DEV_FUJITSU_ 0x00000007L // Fujitsu |
| #define _DEV_TASKING8_ 0x00000006L // Tasking 8051 |
| #define _DEV_TASKING16_ 0x00000005L // Tasking 166 |
| #define _DEV_KEIL8_ 0x00000004L // Keil C51 |
| #define _DEV_KEIL16_ 0x00000003L // Keil C166 |
| #define _DEV_BORLANDC_ 0x00000002L // Borland C/C++ |
| #define _DEV_MSVC16_ 0x00000001L // Microsoft Visual C/C++ |
| #define _DEV_MSVC32_ 0x00000000L // Microsoft Visual C/C++ |
| |
| // these defines can be used to mask previous elements |
| #define _DEV_MASK_COMPILER 0x000000FFL |
| #define _DEV_MASK_BITCOUNT 0x00000F00L |
| #define _DEV_MASK_ADDSUPPORT 0x0000F000L |
| #define _DEV_MASK_ALIGNMENT 0x00F00000L |
| |
| |
| //--------------------------------------------------------------------------- |
| // defines for development system (DEV_SYSTEM) including previous elements |
| //--------------------------------------------------------------------------- |
| |
| #define _DEV_WIN16_ (_DEV_BIT16_ | _DEV_MSVC16_ ) |
| #define _DEV_WIN32_ (_DEV_BIT32_ | _DEV_MSVC32_ | _DEV_64BIT_SUPPORT_ | _DEV_COMMA_EXT_) |
| #define _DEV_MSVC_DOS_ (_DEV_BIT32_ | _DEV_MSVC_V1_5_ ) |
| #define _DEV_BORLAND_DOS_ (_DEV_BIT32_ | _DEV_BORLANDC_ ) //| _DEV_64BIT_SUPPORT_ | _DEV_COMMA_EXT_) |
| #define _DEV_KEIL_C51X_ (_DEV_BIT8_ | _DEV_KEIL8_ | _DEV_BIGEND_ | _DEV_COMMA_EXT_) // at least C51 version 7.05 supports comma extension |
| #define _DEV_KEIL_C16X_ (_DEV_BIT16_ | _DEV_KEIL16_ | _DEV_COMMA_EXT_) // at least C166 version 5.03 supports comma extension |
| #define _DEV_TASKING_C51X_ (_DEV_BIT8_ | _DEV_TASKING8_ | _DEV_BIGEND_) |
| #define _DEV_TASKING_C16X_ (_DEV_BIT16_ | _DEV_TASKING16_ ) |
| #define _DEV_FUJITSU_F590_ (_DEV_BIT8_ | _DEV_FUJITSU_ | _DEV_COMMA_EXT_) // softune is not able to support 64 bit variables QWORD !!! |
| //f.j.29.04.03 M16C kann effektiv mit Bytes umgehen |
| //#define _DEV_TASKING_M16C_ (_DEV_BIT16_ | _DEV_TASKINGM16C_ ) |
| #define _DEV_TASKING_M16C_ (_DEV_BIT8_ | _DEV_TASKINGM16C_ ) |
| #define _DEV_MITSUBISHI_M16C_ (_DEV_BIT8_ | _DEV_MITSUBISHIM16C_ ) |
| #define _DEV_GNU_MPC5X5_ (_DEV_BIT32_ | _DEV_GNUC_MPC5X5| _DEV_BIGEND_ | _DEV_64BIT_SUPPORT_ | _DEV_COMMA_EXT_) |
| #define _DEV_LINUX_ (_DEV_BIT32_ | _DEV_LINUX_GCC_ | _DEV_64BIT_SUPPORT_ | _DEV_COMMA_EXT_) |
| #define _DEV_GNU_C16X_ (_DEV_BIT16_ | _DEV_GNUC_C16X_ ) //| _DEV_COMMA_EXT_) |
| #define _DEV_MCW_MPC5X5_ (_DEV_BIT32_ | _DEV_METROWERKS_CW_ ) //| _DEV_64BIT_SUPPORT_ | _DEV_COMMA_EXT_) |
| #define _DEV_GNU_ARM7_ (_DEV_BIT32_ | _DEV_GNUC_ARM7_ | _DEV_64BIT_SUPPORT_ | _DEV_COMMA_EXT_ | _DEV_ONLY_INT_MAIN_) |
| #define _DEV_WIN32_RTX_ (_DEV_BIT32_ | _DEV_MSVC_RTX_ ) //| _DEV_64BIT_SUPPORT_ | _DEV_COMMA_EXT_) |
| #define _DEV_HIGHTEC_X86_ (_DEV_BIT32_ | _DEV_HIGHTEC_GNUC_X86_ ) //| _DEV_64BIT_SUPPORT_ | _DEV_COMMA_EXT_) |
| #define _DEV_WIN_CE_ (_DEV_BIT32_ | _DEV_MSEVC_ ) //| _DEV_64BIT_SUPPORT_ | _DEV_COMMA_EXT_) |
| #define _DEV_KEIL_CARM_ (_DEV_BIT32_ | _DEV_KEIL_ARM_ | _DEV_64BIT_SUPPORT_ | _DEV_COMMA_EXT_) |
| #define _DEV_IAR_CARM_ (_DEV_BIT32_ | _DEV_IAR_ARM_ | _DEV_64BIT_SUPPORT_ | _DEV_COMMA_EXT_) |
| #define _DEV_RVCT_CARM_ (_DEV_BIT32_ | _DEV_RVCT_ARM_ | _DEV_64BIT_SUPPORT_ | _DEV_COMMA_EXT_ | _DEV_ONLY_INT_MAIN_) |
| #define _DEV_MCW_MCF5XXX_ (_DEV_BIT32_ | _DEV_METROWERKS_CW_ ) //| _DEV_64BIT_SUPPORT_ | _DEV_COMMA_EXT_) |
| #define _DEV_GNU_CF5282_ (_DEV_BIT32_ | _DEV_GNUC_CF_ | _DEV_BIGEND_) |
| #define _DEV_PAR_BECK1X3_ (_DEV_BIT16_ | _DEV_PARADGM_X86) |
| #define _DEV_GNU_CF548X_ (_DEV_BIT32_ | _DEV_GNUC_CF_ | _DEV_BIGEND_ | _DEV_64BIT_SUPPORT_ | _DEV_COMMA_EXT_) |
| #define _DEV_GNU_I386_ (_DEV_BIT32_ | _DEV_GNUC_X86_ | _DEV_64BIT_SUPPORT_ | _DEV_COMMA_EXT_ | _DEV_ONLY_INT_MAIN_) |
| #define _DEV_GNU_TRICORE_ (_DEV_BIT32_ | _DEV_GNUC_TC_ | _DEV_64BIT_SUPPORT_ | _DEV_COMMA_EXT_ | _DEV_ONLY_INT_MAIN_ | _DEV_ALIGNMENT_4_) |
| #define _DEV_MPLAB_DSPIC33F_ (_DEV_BIT16_ | _DEV_MPLAB_C30_ ) //| _DEV_COMMA_EXT_) |
| #define _DEV_GNU_MIPSEL_ (_DEV_BIT32_ | _DEV_GNUC_MIPS2_ | _DEV_BIGEND_ | _DEV_64BIT_SUPPORT_ | _DEV_COMMA_EXT_ | _DEV_ONLY_INT_MAIN_) |
| |
| #define _DEV_RENESAS_M32C_ (_DEV_BIT32_ | _DEV_RENESASM32C) |
| |
| //--------------------------------------------------------------------------- |
| // usefull macros |
| //--------------------------------------------------------------------------- |
| |
| #define CHECK_IF_ONLY_INT_MAIN() (DEV_SYSTEM & _DEV_ONLY_INT_MAIN_) |
| #define CHECK_MEMORY_ALINMENT() (DEV_SYSTEM & _DEV_MASK_ALIGNMENT) |
| |
| |
| //--------------------------------------------------------------------------- |
| // defines for target system (TARGET_SYSTEM) |
| //--------------------------------------------------------------------------- |
| |
| #define _DOS_ (16 + 0x10000) |
| #define _WIN16_ 16 |
| #define _WIN32_ 32 |
| #define _WINCE_ (32 + 0x20000) |
| #define _NO_OS_ 0 |
| #define _LINUX_ 1 |
| #define _PXROS_ 2 |
| #define _ECOSPRO_ 3 |
| |
| |
| //--------------------------------------------------------------------------- |
| // definitions for function inlining |
| //--------------------------------------------------------------------------- |
| |
| #define INLINE_FUNCTION // empty define |
| #undef INLINE_ENABLED // disable actual inlining of functions |
| #undef INLINE_FUNCTION_DEF // disable inlining for all compilers per default |
| |
| //--------------------------------------------------------------------------- |
| // definitions for Keil C51 |
| //--------------------------------------------------------------------------- |
| |
| #ifdef __C51__ |
| |
| #define TARGET_SYSTEM _NO_OS_ |
| #define DEV_SYSTEM _DEV_KEIL_C51X_ |
| |
| #pragma DEBUG OBJECTEXTEND |
| #pragma WARNINGLEVEL(2) // maximum warning level |
| |
| #define NEAR idata // variables mapped to internal data storage location |
| #define FAR xdata // variables mapped to external data storage location |
| #define CONST const // variables mapped to ROM (i.e. flash) |
| #define ROM code // code or variables mapped to ROM (i.e. flash) |
| // usage: CONST BYTE ROM foo = 0x00; |
| #define HWACC xdata // hardware access through external memory (i.e. CAN) |
| #define LARGE large // functions set parameters to external data storage location |
| |
| // These types can be adjusted by users to match application requirements. The goal is to |
| // minimize code memory and maximize speed. |
| #define GENERIC // generic pointer to point to application data |
| // Variables with this attribute can be located in external |
| // or internal data memory. |
| #define MEM xdata // Memory attribute to optimize speed and code of pointer access. |
| |
| #define REENTRANT reentrant |
| #define PUBLIC |
| |
| #ifndef NDEBUG |
| #include <stdio.h> // prototype printf() (for TRACE) |
| #define TRACE printf |
| #endif |
| |
| |
| //--------------------------------------------------------------------------- |
| // definitions for GNU Compiler for Infineon C16x |
| // - it have to be befor Keil (it has __C166__ too) |
| //--------------------------------------------------------------------------- |
| #elif defined (__GNUC__) && defined (__C166__) |
| |
| #define TARGET_SYSTEM _NO_OS_ |
| #define DEV_SYSTEM _DEV_GNU_C16X_ |
| |
| // #define NEAR idata // variables mapped to internal data storage location |
| #define NEAR near // variables mapped to internal data storage location |
| // #define FAR xhuge // variables mapped to external data storage location |
| #define FAR huge // variables mapped to external data storage location |
| #define CONST const // variables mapped to ROM (i.e. flash) |
| #define ROM // code or variables mapped to ROM (i.e. flash) |
| // usage: CONST BYTE ROM foo = 0x00; |
| // #define HWACC sdata // hardware access through external memory (i.e. CAN) |
| #define HWACC huge // hardware access through external memory (i.e. CAN) |
| #define LARGE // functions set parameters to external data storage location |
| |
| // These types can be adjusted by users to match application requirements. The goal is to |
| // minimize code memory and maximize speed. |
| // #define GENERIC xhuge // generic pointer to point to application data |
| #define GENERIC huge // generic pointer to point to application data |
| // Variables with this attribute can be located in external |
| // or internal data memory. |
| #define MEM // Memory attribute to optimize speed and code of pointer access. |
| |
| #define REENTRANT |
| #define PUBLIC |
| |
| #ifndef NDEBUG |
| #include <stdio.h> // prototype printf() (for TRACE) |
| #define TRACE printf |
| |
| #define ASSERT(p) \ |
| if (p) \ |
| { \ |
| ; \ |
| } \ |
| else \ |
| { \ |
| PRINTF0("Assert failed: " #p " (file %s line %d)\n", __FILE__, (int) __LINE__ ); \ |
| while (1); \ |
| } |
| #else |
| #define ASSERT(p) |
| #endif |
| |
| //--------------------------------------------------------------------------- |
| // definitions for Keil C166 |
| //--------------------------------------------------------------------------- |
| #elif defined (__C166__) // 24.01.2005 r.d.: Keil ARM7 needs directive 'defined' |
| |
| #define TARGET_SYSTEM _NO_OS_ |
| #define DEV_SYSTEM _DEV_KEIL_C16X_ |
| |
| #pragma CODE |
| #pragma MOD167 |
| #pragma NOINIT |
| #pragma DEBUG |
| #pragma WARNINGLEVEL(3) // maximum warning level |
| #pragma WARNING DISABLE = 47 // warning <unreferenced parameter> = OFF |
| #pragma WARNING DISABLE = 38 // warning <empty translation unit> = OFF |
| // #pragma WARNING DISABLE = 102 // warning <different const/volatile qualifiers> = OFF |
| #pragma WARNING DISABLE = 174 // warning <unreferenced 'static' function> = OFF |
| #pragma WARNING DISABLE = 183 // warning <dead assignement eliminated> = OFF |
| |
| #define NEAR idata // variables mapped to internal data storage location |
| #define FAR xhuge // variables mapped to external data storage location |
| #define CONST const // variables mapped to ROM (i.e. flash) |
| #define ROM // code or variables mapped to ROM (i.e. flash) |
| // usage: CONST BYTE ROM foo = 0x00; |
| // #define HWACC sdata // hardware access through external memory (i.e. CAN) |
| #define HWACC huge // hardware access through external memory (i.e. CAN) |
| #define LARGE // functions set parameters to external data storage location |
| |
| // These types can be adjusted by users to match application requirements. The goal is to |
| // minimize code memory and maximize speed. |
| #define GENERIC xhuge // generic pointer to point to application data |
| // Variables with this attribute can be located in external |
| // or internal data memory. |
| #define MEM // Memory attribute to optimize speed and code of pointer access. |
| |
| #define REENTRANT |
| #define PUBLIC |
| |
| #ifndef NDEBUG |
| #include <stdio.h> // prototype printf() (for TRACE) |
| #define TRACE printf |
| #endif |
| |
| //--------------------------------------------------------------------------- |
| // definitions for MPLAB C30 for dsPIC33F series |
| //--------------------------------------------------------------------------- |
| #elif defined (__C30__) |
| |
| #define TARGET_SYSTEM _NO_OS_ |
| #define DEV_SYSTEM _DEV_MPLAB_DSPIC33F_ |
| |
| #define NEAR // variables mapped to internal data storage location |
| #define FAR // variables mapped to external data storage location |
| #define CONST const // variables mapped to ROM (i.e. flash) |
| #define ROM // code or variables mapped to ROM (i.e. flash) |
| // usage: CONST BYTE ROM foo = 0x00; |
| #define HWACC // hardware access through external memory (i.e. CAN) |
| #define LARGE // functions set parameters to external data storage location |
| |
| // These types can be adjusted by users to match application requirements. The goal is to |
| // minimize code memory and maximize speed. |
| #define GENERIC // generic pointer to point to application data |
| // Variables with this attribute can be located in external |
| // or internal data memory. |
| #define MEM // Memory attribute to optimize speed and code of pointer access. |
| |
| #define REENTRANT |
| #define PUBLIC |
| |
| // #ifndef QWORD |
| // #define QWORD long long |
| // #endif |
| |
| #ifndef NDEBUG |
| #include <stdio.h> // prototype printf() (for TRACE) |
| #define TRACE printf |
| #endif |
| |
| //--------------------------------------------------------------------------- |
| // definitions for Keil ARM |
| //--------------------------------------------------------------------------- |
| #elif defined (__CA__) |
| |
| #define TARGET_SYSTEM _NO_OS_ |
| #define DEV_SYSTEM _DEV_KEIL_CARM_ |
| |
| #define NEAR // variables mapped to internal data storage location |
| #define FAR // variables mapped to external data storage location |
| #define CONST const // variables mapped to ROM (i.e. flash) |
| #define ROM // code or variables mapped to ROM (i.e. flash) |
| // usage: CONST BYTE ROM foo = 0x00; |
| #define HWACC // hardware access through external memory (i.e. CAN) |
| #define LARGE // functions set parameters to external data storage location |
| |
| // These types can be adjusted by users to match application requirements. The goal is to |
| // minimize code memory and maximize speed. |
| #define GENERIC // generic pointer to point to application data |
| // Variables with this attribute can be located in external |
| // or internal data memory. |
| #define MEM // Memory attribute to optimize speed and code of pointer access. |
| |
| #define REENTRANT |
| #define PUBLIC |
| |
| #ifndef QWORD |
| #define QWORD long long |
| #endif |
| |
| #ifndef NDEBUG |
| #include <stdio.h> // prototype printf() (for TRACE) |
| #define TRACE printf |
| #endif |
| |
| //--------------------------------------------------------------------------- |
| // definitions for RealView ARM compilation tools (provided by recent Keil Microcontroller Development Kits) |
| //--------------------------------------------------------------------------- |
| #elif defined (__ARMCC_VERSION) |
| |
| #define TARGET_SYSTEM _NO_OS_ |
| #define DEV_SYSTEM _DEV_RVCT_CARM_ |
| |
| #define NEAR // variables mapped to internal data storage location |
| #define FAR // variables mapped to external data storage location |
| #define CONST const // variables mapped to ROM (i.e. flash) |
| #define ROM // code or variables mapped to ROM (i.e. flash) |
| // usage: CONST BYTE ROM foo = 0x00; |
| #define HWACC // hardware access through external memory (i.e. CAN) |
| #define LARGE // functions set parameters to external data storage location |
| |
| // These types can be adjusted by users to match application requirements. The goal is to |
| // minimize code memory and maximize speed. |
| #define GENERIC // generic pointer to point to application data |
| // Variables with this attribute can be located in external |
| // or internal data memory. |
| #define MEM // Memory attribute to optimize speed and code of pointer access. |
| |
| #define REENTRANT |
| #define PUBLIC |
| |
| #ifndef QWORD |
| #define QWORD long long |
| #endif |
| |
| #ifndef NDEBUG |
| #define ASSERT(expr) if (!(expr)) {\ |
| TRACE0 ("Assertion failed: " #expr );\ |
| while (1);} |
| #else |
| #define ASSERT(expr) |
| #endif |
| |
| #ifndef NDEBUG |
| #include <stdio.h> // prototype printf() (for TRACE) |
| #define TRACE printf |
| #endif |
| |
| //--------------------------------------------------------------------------- |
| // definitions for ARM IAR C Compiler |
| //--------------------------------------------------------------------------- |
| #elif defined (__ICCARM__) |
| |
| #define TARGET_SYSTEM _NO_OS_ |
| #define DEV_SYSTEM _DEV_IAR_CARM_ |
| |
| #define NEAR // variables mapped to internal data storage location |
| #define FAR // variables mapped to external data storage location |
| #define CONST const // variables mapped to ROM (i.e. flash) |
| #define ROM // code or variables mapped to ROM (i.e. flash) |
| // usage: CONST BYTE ROM foo = 0x00; |
| #define HWACC // hardware access through external memory (i.e. CAN) |
| #define LARGE // functions set parameters to external data storage location |
| |
| // These types can be adjusted by users to match application requirements. The goal is to |
| // minimize code memory and maximize speed. |
| #define GENERIC // generic pointer to point to application data |
| // Variables with this attribute can be located in external |
| // or internal data memory. |
| #define MEM // Memory attribute to optimize speed and code of pointer access. |
| |
| #define REENTRANT |
| #define PUBLIC |
| |
| #ifndef QWORD |
| #define QWORD long long |
| #endif |
| |
| // Workaround: |
| // If we use IAR and want to debug but don't want to use C-Spy Debugger |
| // assert() doesn't work in debug mode because it needs support for FILE descriptors |
| // (_DLIB_FILE_DESCRIPTOR == 1). |
| #ifndef NDEBUG |
| #define ASSERT(expr) if (!(expr)) {\ |
| TRACE0 ("Assertion failed: " #expr );\ |
| while (1);} |
| #else |
| #define ASSERT(expr) |
| #endif |
| |
| #ifndef NDEBUG |
| #include <stdio.h> // prototype printf() (for TRACE) |
| #define TRACE printf |
| // #define TRACE PRINTF4 |
| #endif |
| |
| //--------------------------------------------------------------------------- |
| // definitions for Tasking 8051 |
| //--------------------------------------------------------------------------- |
| |
| #elif defined (_CC51) |
| |
| #include <cc51.h> |
| |
| #define TARGET_SYSTEM _NO_OS_ |
| #define DEV_SYSTEM _DEV_TASKING_C51X_ |
| |
| #define NEAR _data // variables mapped to internal data storage location |
| #define FAR _xdat // variables mapped to external data storage location |
| #define CONST const // variables mapped to ROM (i.e. flash) |
| #define ROM // code or variables mapped to ROM (i.e. flash) |
| // usage: CONST BYTE ROM foo = 0x00; |
| #define HWACC _xdat // hardware access through external memory (i.e. CAN) |
| #define LARGE // functions set parameters to external data storage location |
| |
| // These types can be adjusted by users to match application requirements. The goal is to |
| // minimize code memory and maximize speed. |
| #define GENERIC // generic pointer to point to application data |
| // Variables with this attribute can be located in external |
| // or internal data memory. |
| #define MEM _xdat // Memory attribute to optimize speed and code of pointer access. |
| |
| #define REENTRANT _reentrant |
| #define PUBLIC |
| |
| #ifndef NDEBUG |
| #include <stdio.h> // prototype printf() (for TRACE) |
| #define TRACE printf |
| #endif |
| |
| |
| //--------------------------------------------------------------------------- |
| // definitions for Tasking C167CR and C164CI |
| //--------------------------------------------------------------------------- |
| |
| #elif defined (_C166) |
| |
| #define TARGET_SYSTEM _NO_OS_ |
| #define DEV_SYSTEM _DEV_TASKING_C16X_ |
| |
| #define NEAR near // variables mapped to internal data storage location |
| #define FAR far // variables mapped to external data storage location |
| #define CONST const // variables mapped to ROM (i.e. flash) |
| #define ROM // code or variables mapped to ROM (i.e. flash) |
| // usage: CONST BYTE ROM foo = 0x00; |
| #define HWACC /* to be defined */ // hardware access through external memory (i.e. CAN) |
| #define LARGE // functions set parameters to external data storage location |
| |
| // These types can be adjusted by users to match application requirements. The goal is to |
| // minimize code memory and maximize speed. |
| #define GENERIC // generic pointer to point to application data |
| // Variables with this attribute can be located in external |
| // or internal data memory. |
| #define MEM // Memory attribute to optimize speed and code of pointer access. |
| |
| #define REENTRANT |
| #define PUBLIC |
| |
| // Stdio.h has to be alway included here. If printf() is used stdio.h defines NULL |
| // without checking if it is already included. So an error occurs while compiling. |
| // (r.d.) |
| #include <stdio.h> // prototype printf() (for TRACE) |
| #ifndef NDEBUG |
| #define TRACE printf |
| #endif |
| |
| |
| //--------------------------------------------------------------------------- |
| // definitions for FUJITSU FFMC-16LX MB90590 |
| //--------------------------------------------------------------------------- |
| |
| //#elif (defined (F590) || defined (F543) || defined (F598) || defined (F495) || defined (F350)) |
| #elif defined(__COMPILER_FCC907__) |
| |
| #define TARGET_SYSTEM _NO_OS_ |
| #define DEV_SYSTEM _DEV_FUJITSU_F590_ |
| |
| #define NEAR /* to be defined */ // variables mapped to internal data storage location |
| #define FAR /* to be defined */ // variables mapped to external data storage location |
| #define CONST const // variables mapped to ROM (i.e. flash) |
| #define ROM /* to be defined */ // code or variables mapped to ROM (i.e. flash) |
| // usage: CONST BYTE ROM foo = 0x00; |
| #define HWACC /* to be defined */ // hardware access through external memory (i.e. CAN) |
| #define LARGE // functions set parameters to external data storage location |
| |
| // These types can be adjusted by users to match application requirements. The goal is to |
| // minimize code memory and maximize speed. |
| #define GENERIC // generic pointer to point to application data |
| // Variables with this attribute can be located in external |
| // or internal data memory. |
| #define MEM // Memory attribute to optimize speed and code of pointer access. |
| |
| // softune is not able to support 64 bit variables QWORD !!! |
| |
| #define REENTRANT |
| #define PUBLIC |
| |
| #ifndef NDEBUG |
| #include <stdio.h> // prototype printf() (for TRACE) |
| #define TRACE printf |
| #endif |
| |
| |
| //--------------------------------------------------------------------------- |
| // definitions for Mitsubishi M16C family for TASKING Compiler CM16 |
| //--------------------------------------------------------------------------- |
| |
| #elif defined (_CM16C) |
| |
| #define TARGET_SYSTEM _NO_OS_ |
| #define DEV_SYSTEM _DEV_TASKING_M16C_ |
| |
| #define NEAR _near // variables mapped to internal data storage location |
| #define FAR _far // variables mapped to external data storage location |
| #define CONST _farrom // variables mapped to ROM (i.e. flash) |
| #define ROM // code or variables mapped to ROM (i.e. flash) |
| // usage: CONST BYTE ROM foo = 0x00; |
| #define HWACC _near // hardware access through external memory (i.e. CAN) |
| #define LARGE // functions set parameters to external data storage location |
| |
| // These types can be adjusted by users to match application requirements. The goal is to |
| // minimize code memory and maximize speed. |
| #define GENERIC _far // generic pointer to point to application data |
| // Variables with this attribute can be located in external |
| // or internal data memory. |
| // do you use memory model SMALL, than you have to set _far |
| #define MEM // Memory attribute to optimize speed and code of pointer access. |
| |
| #define REENTRANT |
| #define PUBLIC |
| |
| // Stdio.h has to be alway included here. If printf() is used stdio.h defines NULL |
| // without checking if it is already included. So an error occurs while compiling. |
| // (r.d.) |
| #include <stdio.h> // prototype printf() (for TRACE) |
| #ifndef NDEBUG |
| #define TRACE printf |
| #endif |
| |
| |
| //--------------------------------------------------------------------------- |
| // definitions for Mitsubishi M16C family for Mitsubishi Compiler NC30 |
| //--------------------------------------------------------------------------- |
| // name NC30, andere Form will der Compiler nicht !! |
| #elif defined (NC30) |
| |
| #define TARGET_SYSTEM _NO_OS_ |
| #define DEV_SYSTEM _DEV_MITSUBISHI_M16C_ |
| |
| #define NEAR near // variables mapped to internal data storage location |
| #define FAR far // variables mapped to external data storage location |
| #define CONST const // variables mapped to ROM (i.e. flash) |
| #define ROM // code or variables mapped to ROM (i.e. flash) |
| // usage: CONST BYTE ROM foo = 0x00; |
| #define HWACC near // hardware access through external memory (i.e. CAN) |
| #define LARGE // functions set parameters to external data storage location |
| |
| // These types can be adjusted by users to match application requirements. The goal is to |
| // minimize code memory and maximize speed. |
| #define GENERIC far // generic pointer to point to application data |
| // Variables with this attribute can be located in external |
| // or internal data memory. |
| #define MEM // Memory attribute to optimize speed and code of pointer access. |
| |
| #define REENTRANT |
| #define PUBLIC |
| |
| #ifndef NDEBUG |
| #include <stdio.h> // prototype printf() (for TRACE) |
| #define TRACE printf |
| #endif |
| |
| //--------------------------------------------------------------------------- |
| // definitions for Renesas M32C family for Renesas Compiler |
| //--------------------------------------------------------------------------- |
| #elif defined (NC308) |
| |
| #define TARGET_SYSTEM _NO_OS_ |
| #define DEV_SYSTEM _DEV_RENESAS_M32C_ |
| |
| #define NEAR near // variables mapped to internal data storage location |
| #define FAR far // variables mapped to external data storage location |
| #define CONST const // variables mapped to ROM (i.e. flash) |
| #define ROM // code or variables mapped to ROM (i.e. flash) |
| #define HWACC // hardware access through external memory (i.e. CAN) |
| #define LARGE // functions set parameters to external data storage location |
| |
| // These types can be adjusted by users to match application requirements. The goal is to |
| // minimize code memory and maximize speed. |
| #define GENERIC // generic pointer to point to application data |
| // Variables with this attribute can be located in external |
| // or internal data memory. |
| #define MEM far // Memory attribute to optimize speed and code of pointer access. |
| |
| #define REENTRANT |
| #define PUBLIC |
| |
| #ifndef NDEBUG |
| #include <stdio.h> // prototype printf() (for TRACE) |
| #define TRACE printf |
| #endif |
| |
| // #error ("RENESAS o.k.") |
| |
| //--------------------------------------------------------------------------- |
| // definitions for ARM7 family with GNU compiler |
| //--------------------------------------------------------------------------- |
| |
| #elif defined(__GNUC__) && defined(__arm__) && !defined(__LINUX_ARM_ARCH__) |
| |
| #define TARGET_SYSTEM _NO_OS_ |
| #define DEV_SYSTEM _DEV_GNU_ARM7_ |
| |
| #define NEAR // variables mapped to internal data storage location |
| #define FAR // variables mapped to external data storage location |
| #define CONST const // variables mapped to ROM (i.e. flash) |
| #define ROM // code or variables mapped to ROM (i.e. flash) |
| // usage: CONST BYTE ROM foo = 0x00; |
| #define HWACC // hardware access through external memory (i.e. CAN) |
| #define LARGE // functions set parameters to external data storage location |
| |
| // These types can be adjusted by users to match application requirements. The goal is to |
| // minimize code memory and maximize speed. |
| #define GENERIC // generic pointer to point to application data |
| // Variables with this attribute can be located in external |
| // or internal data memory. |
| #define MEM // Memory attribute to optimize speed and code of pointer access. |
| #define HWACC // hardware access through external memory (i.e. CAN) |
| |
| #define REENTRANT |
| #define PUBLIC |
| |
| #ifndef QWORD |
| #define QWORD long long // i.A. durch Herr Kuschel |
| #endif |
| |
| #ifndef NDEBUG |
| #include <stdio.h> // prototype printf() (for TRACE) |
| #define TRACE printf |
| #endif |
| |
| |
| //--------------------------------------------------------------------------- |
| // definitions for Motorola PowerPC family 5x5 (555/565) |
| // definitions Linux-PC |
| //--------------------------------------------------------------------------- |
| |
| #elif defined (__GNUC__) |
| |
| #if defined (LINUX) || defined (linux) || defined (__linux__) |
| #define LINUX_SYSTEM // define 'LINUX_SYSTEM' uniform for all Linux based systems |
| // r.d.: We will need an other solution here! There are two sections here which do check the preproc-definitions: |
| // LINUX and __linux__ . The first one was Linux for PC, the second one is this section for embedded Linux (MCF5xxx). |
| // But Linux for PC does not need the definitions for embedded Linux. |
| #endif |
| |
| // GNU C compiler supports function inlining |
| #define INLINE_FUNCTION_DEF extern inline |
| |
| // to actually enable inlining just include the following three lines |
| // #undef INLINE_FUNCTION |
| // #define INLINE_FUNCTION INLINE_FUNCTION_DEF |
| // #define INLINE_ENABLED TRUE |
| |
| #ifdef PXROS |
| #define TARGET_SYSTEM _PXROS_ |
| #ifdef __i386__ |
| #undef LINUX // this define seems to be set from compiler |
| #define DEV_SYSTEM _DEV_HIGHTEC_X86_ |
| #elif defined (__tricore__) |
| #define DEV_SYSTEM _DEV_GNU_TRICORE_ |
| #else // MPC5x5 |
| #define DEV_SYSTEM _DEV_GNU_MPC5X5_ |
| #endif |
| |
| #elif defined (LINUX) || defined (__linux__) |
| #define TARGET_SYSTEM _LINUX_ // Linux definition |
| #define DEV_SYSTEM _DEV_LINUX_ |
| |
| #elif defined (GNU_CF5282) |
| #define TARGET_SYSTEM _NO_OS_ |
| #define DEV_SYSTEM _DEV_GNU_CF5282_ |
| |
| #elif defined (ECOSPRO_I386_PEAK_PCI) |
| #define TARGET_SYSTEM _ECOSPRO_ |
| #define DEV_SYSTEM _DEV_GNU_I386_ |
| |
| #elif defined (GNU_CF548X) |
| #define TARGET_SYSTEM _NO_OS_ |
| #define DEV_SYSTEM _DEV_GNU_CF548X_ |
| #else |
| #error 'ERROR: DEV_SYSTEM not found!' |
| #endif |
| |
| |
| #ifndef QWORD |
| #define QWORD long long int |
| #endif |
| |
| #if (TARGET_SYSTEM == _PXROS_) |
| |
| #ifndef __KERNEL__ |
| #include <string.h> |
| #endif |
| |
| |
| #define NEAR // variables mapped to internal data storage location |
| #define FAR // variables mapped to external data storage location |
| #define CONST const // variables mapped to ROM (i.e. flash) |
| #define ROM /* to be defined */ // code or variables mapped to ROM (i.e. flash) |
| // usage: CONST BYTE ROM foo = 0x00; |
| #define LARGE // functions set parameters to external data storage location |
| |
| // These types can be adjusted by users to match application requirements. The goal is to |
| // minimize code memory and maximize speed. |
| #define GENERIC // generic pointer to point to application data |
| // Variables with this attribute can be located in external |
| // or internal data memory. |
| #define MEM // Memory attribute to optimize speed and code of pointer access. |
| |
| #define HWACC // hardware access through external memory (i.e. CAN) |
| |
| #define REENTRANT |
| #define PUBLIC |
| |
| #ifndef QWORD |
| #define QWORD long long int |
| #endif |
| |
| #ifndef NDEBUG |
| #include <stdio.h> // prototype printf() (for TRACE) |
| #define TRACE printf |
| #endif |
| |
| #endif |
| |
| // ------------------ GNUC for I386 --------------------------------------------- |
| |
| #if (TARGET_SYSTEM == _LINUX_) || (TARGET_SYSTEM == _ECOSPRO_) |
| |
| #ifndef __KERNEL__ |
| #include <string.h> |
| #endif |
| |
| #define ROM // code or variables mapped to ROM (i.e. flash) |
| // usage: CONST BYTE ROM foo = 0x00; |
| #define HWACC // hardware access through external memory (i.e. CAN) |
| |
| // These types can be adjusted by users to match application requirements. The goal is to |
| // minimize code memory and maximize speed. |
| #define GENERIC // generic pointer to point to application data |
| // Variables with this attribute can be located in external |
| // or internal data memory. |
| #define MEM // Memory attribute to optimize speed and code of pointer access. |
| |
| #ifndef NEAR |
| #define NEAR // variables mapped to internal data storage location |
| #endif |
| |
| #ifndef FAR |
| #define FAR // variables mapped to external data storage location |
| #endif |
| |
| #ifndef CONST |
| #define CONST const // variables mapped to ROM (i.e. flash) |
| #endif |
| |
| #define LARGE |
| |
| #define REENTRANT |
| #define PUBLIC |
| |
| #ifndef NDEBUG |
| #ifndef __KERNEL__ |
| #include <stdio.h> // prototype printf() (for TRACE) |
| #define TRACE printf |
| #else |
| #define TRACE printk |
| #endif |
| #endif |
| #endif |
| |
| // ------------------ GNU without OS --------------------------------------------- |
| |
| #if (TARGET_SYSTEM == _NO_OS_) |
| |
| #define ROM // code or variables mapped to ROM (i.e. flash) |
| // usage: CONST BYTE ROM foo = 0x00; |
| #define HWACC // hardware access through external memory (i.e. CAN) |
| |
| // These types can be adjusted by users to match application requirements. The goal is to |
| // minimize code memory and maximize speed. |
| #define GENERIC // generic pointer to point to application data |
| // Variables with this attribute can be located in external |
| // or internal data memory. |
| #define MEM // Memory attribute to optimize speed and code of pointer access. |
| |
| #ifndef NEAR |
| #define NEAR // variables mapped to internal data storage location |
| #endif |
| |
| #ifndef FAR |
| #define FAR // variables mapped to external data storage location |
| #endif |
| |
| #ifndef CONST |
| #define CONST const // variables mapped to ROM (i.e. flash) |
| #endif |
| |
| #define LARGE |
| |
| #define REENTRANT |
| #define PUBLIC |
| |
| #ifndef NDEBUG |
| // #include "xuartdrv.h" |
| // #include <stdio.h> // prototype printf() (for TRACE) |
| #define TRACE printf |
| // #define TRACE mprintf |
| // #ifndef TRACE |
| // #define TRACE trace |
| // void trace (char *fmt, ...); |
| // #endif |
| #endif |
| |
| #endif |
| |
| //--------------------------------------------------------------------------- |
| // definitions for MPC565 |
| //--------------------------------------------------------------------------- |
| #elif __MWERKS__ |
| |
| |
| #ifdef __MC68K__ |
| |
| #define TARGET_SYSTEM = _MCF548X_ |
| #define DEV_SYSTEM _DEV_MCW_MCF5XXX_ |
| |
| #else |
| #define TARGET_SYSTEM = _MPC565_ |
| #define DEV_SYSTEM _DEV_MCW_MPC5X5_ |
| #endif |
| |
| #define NEAR // variables mapped to internal data storage location |
| #define FAR // variables mapped to external data storage location |
| #define CONST const // variables mapped to ROM (i.e. flash) |
| #define ROM // code or variables mapped to ROM (i.e. flash) |
| // usage: CONST BYTE ROM foo = 0x00; |
| #define LARGE // functions set parameters to external data storage location |
| |
| // These types can be adjusted by users to match application requirements. The goal is to |
| // minimize code memory and maximize speed. |
| #define GENERIC // generic pointer to point to application data |
| // Variables with this attribute can be located in external |
| // or internal data memory. |
| #define MEM // Memory attribute to optimize speed and code of pointer access. |
| |
| #define HWACC // hardware access through external memory (i.e. CAN) |
| |
| #define REENTRANT |
| #define PUBLIC |
| |
| #ifndef NDEBUG |
| #include <stdio.h> // prototype printf() (for TRACE) |
| #define TRACE printf |
| #endif |
| |
| //--------------------------------------------------------------------------- |
| // definitions for BECK 1x3 |
| //--------------------------------------------------------------------------- |
| #elif defined (__BORLANDC__) && defined (__PARADIGM__) |
| |
| |
| #define TARGET_SYSTEM _NO_OS_ |
| #define DEV_SYSTEM _DEV_PAR_BECK1X3_ |
| |
| |
| |
| #define ROM // code or variables mapped to ROM (i.e. flash) |
| // usage: CONST BYTE ROM foo = 0x00; |
| #define HWACC // hardware access through external memory (i.e. CAN) |
| |
| // These types can be adjusted by users to match application requirements. The goal is to |
| // minimize code memory and maximize speed. |
| #define GENERIC // generic pointer to point to application data |
| // Variables with this attribute can be located in external |
| // or internal data memory. |
| #define MEM // Memory attribute to optimize speed and code of pointer access. |
| #define NEAR __near // variables mapped to internal data storage location |
| #define FAR __far // variables mapped to external data storage location |
| #define CONST const // variables mapped to ROM (i.e. flash) |
| #define LARGE |
| |
| #define REENTRANT |
| #define PUBLIC |
| |
| #ifndef NDEBUG |
| #ifndef TRACE |
| #include <stdio.h> |
| #define TRACE printf |
| #endif |
| #endif |
| |
| |
| |
| //--------------------------------------------------------------------------- |
| // definitions for PC |
| //--------------------------------------------------------------------------- |
| |
| #elif defined (__BORLANDC__) |
| |
| // ------------------ definition target system -------------------------- |
| |
| #ifdef _WIN32 |
| #define TARGET_SYSTEM _WIN32_ // WIN32 definition |
| #define DEV_SYSTEM _DEV_WIN32_ |
| #else |
| #define TARGET_SYSTEM _DOS_ |
| #define DEV_SYSTEM _DEV_BORLAND_DOS_ |
| #endif |
| |
| |
| // ------------------ WIN32 --------------------------------------------- |
| |
| #if (TARGET_SYSTEM == _WIN32_) |
| |
| #define ROM // code or variables mapped to ROM (i.e. flash) |
| // usage: CONST BYTE ROM foo = 0x00; |
| #define HWACC // hardware access through external memory (i.e. CAN) |
| |
| // These types can be adjusted by users to match application requirements. The goal is to |
| // minimize code memory and maximize speed. |
| #define GENERIC // generic pointer to point to application data |
| // Variables with this attribute can be located in external |
| // or internal data memory. |
| #define MEM // Memory attribute to optimize speed and code of pointer access. |
| |
| #ifndef NEAR |
| #define NEAR // variables mapped to internal data storage location |
| #endif |
| |
| #ifndef FAR |
| #define FAR // variables mapped to external data storage location |
| #endif |
| |
| #ifndef CONST |
| #define CONST const // variables mapped to ROM (i.e. flash) |
| #endif |
| |
| #define LARGE |
| |
| #define REENTRANT |
| #define PUBLIC __stdcall |
| |
| #ifndef NDEBUG |
| #ifndef TRACE |
| #include <stdio.h> |
| #define TRACE printf |
| #endif |
| #endif |
| |
| #elif (TARGET_SYSTEM == _DOS_) |
| |
| #define ROM // code or variables mapped to ROM (i.e. flash) |
| // usage: CONST BYTE ROM foo = 0x00; |
| #define HWACC // hardware access through external memory (i.e. CAN) |
| |
| // These types can be adjusted by users to match application requirements. The goal is to |
| // minimize code memory and maximize speed. |
| #define GENERIC // generic pointer to point to application data |
| // Variables with this attribute can be located in external |
| // or internal data memory. |
| #define MEM // Memory attribute to optimize speed and code of pointer access. |
| #define NEAR near // variables mapped to internal data storage location |
| #define FAR far // variables mapped to external data storage location |
| #define CONST const // variables mapped to ROM (i.e. flash) |
| #define LARGE |
| |
| #define REENTRANT |
| #define PUBLIC |
| |
| #ifndef NDEBUG |
| #ifndef TRACE |
| #include <stdio.h> |
| #define TRACE printf |
| #endif |
| #endif |
| |
| #endif |
| |
| #elif (_MSC_VER == 800) // PC MS Visual C/C++ for DOS applications |
| |
| #define TARGET_SYSTEM _DOS_ |
| #define DEV_SYSTEM _DEV_MSVC_DOS_ |
| |
| #define ROM // code or variables mapped to ROM (i.e. flash) |
| // usage: CONST BYTE ROM foo = 0x00; |
| #define HWACC near // hardware access through external memory (i.e. CAN) |
| |
| // These types can be adjusted by users to match application requirements. The goal is to |
| // minimize code memory and maximize speed. |
| #define GENERIC // generic pointer to point to application data |
| // Variables with this attribute can be located in external |
| // or internal data memory. |
| #define MEM // Memory attribute to optimize speed and code of pointer access. |
| #define NEAR near // variables mapped to internal data storage location |
| #define FAR far // variables mapped to external data storage location |
| #define CONST const // variables mapped to ROM (i.e. flash) |
| #define LARGE |
| |
| #define REENTRANT |
| #define PUBLIC |
| |
| #ifndef NDEBUG |
| #ifndef TRACE |
| #include <stdio.h> |
| #define TRACE printf |
| #endif |
| #endif |
| |
| |
| //--------------------------------------------------------------------------- |
| // definitions for RTX under WIN32 |
| //--------------------------------------------------------------------------- |
| #elif (defined (UNDER_RTSS) && defined (WIN32)) |
| |
| // ------------------ definition target system -------------------------- |
| #define TARGET_SYSTEM _WIN32_RTX_ |
| #define DEV_SYSTEM _DEV_WIN32_RTX_ |
| |
| #define ROM // code or variables mapped to ROM (i.e. flash) |
| // usage: CONST BYTE ROM foo = 0x00; |
| #define HWACC // hardware access through external memory (i.e. CAN) |
| |
| // These types can be adjusted by users to match application requirements. The goal is to |
| // minimize code memory and maximize speed. |
| #define GENERIC // generic pointer to point to application data |
| // Variables with this attribute can be located in external |
| // or internal data memory. |
| #define MEM // Memory attribute to optimize speed and code of pointer access. |
| |
| #ifndef NEAR |
| #define NEAR // variables mapped to internal data storage location |
| #endif |
| |
| #ifndef FAR |
| #define FAR // variables mapped to external data storage location |
| #endif |
| |
| #ifndef CONST |
| #define CONST const // variables mapped to ROM (i.e. flash) |
| #endif |
| |
| #define LARGE |
| |
| #define REENTRANT |
| #define PUBLIC __stdcall |
| |
| #ifndef NDEBUG |
| #ifndef TRACE |
| #define TRACE RtPrintf |
| #endif |
| #endif |
| |
| //--------------------------------------------------------------------------- |
| // definitions for WinCE |
| //--------------------------------------------------------------------------- |
| #elif defined (_WIN32_WCE) |
| |
| // ------------------ definition target system -------------------------- |
| #define TARGET_SYSTEM _WINCE_ |
| #define DEV_SYSTEM _DEV_WIN_CE_ |
| |
| #define ROM // code or variables mapped to ROM (i.e. flash) |
| // usage: CONST BYTE ROM foo = 0x00; |
| #define HWACC // hardware access through external memory (i.e. CAN) |
| |
| // These types can be adjusted by users to match application requirements. The goal is to |
| // minimize code memory and maximize speed. |
| #define GENERIC // generic pointer to point to application data |
| // Variables with this attribute can be located in external |
| // or internal data memory. |
| #define MEM // Memory attribute to optimize speed and code of pointer access. |
| |
| #ifndef NEAR |
| #define NEAR // variables mapped to internal data storage location |
| #endif |
| |
| #ifndef FAR |
| #define FAR // variables mapped to external data storage location |
| #endif |
| |
| #ifndef CONST |
| #define CONST const // variables mapped to ROM (i.e. flash) |
| #endif |
| |
| #define LARGE |
| |
| #ifndef QWORD |
| //#define QWORD long long int // MSVC .NET can use "long long int" too (like GNU) |
| #define QWORD __int64 |
| #endif |
| |
| #define REENTRANT |
| #define PUBLIC __cdecl |
| |
| #ifdef ASSERTMSG |
| #undef ASSERTMSG |
| #endif |
| |
| #ifndef NDEBUG |
| #ifndef TRACE |
| #define TRACE printf |
| // void trace (char *fmt, ...); |
| #endif |
| #endif |
| |
| #else // ===> PC MS Visual C/C++ |
| |
| // ------------------ definition target system -------------------------- |
| |
| #ifdef _WIN32 |
| #define TARGET_SYSTEM _WIN32_ // WIN32 definition |
| #define DEV_SYSTEM _DEV_WIN32_ |
| #else |
| #define TARGET_SYSTEM _WIN16_ // WIN16 definition |
| #define DEV_SYSTEM _DEV_WIN16_ |
| #endif |
| |
| |
| // ------------------ WIN16 --------------------------------------------- |
| |
| #if (TARGET_SYSTEM == _WIN16_) |
| |
| #define ROM // code or variables mapped to ROM (i.e. flash) |
| // usage: CONST BYTE ROM foo = 0x00; |
| #define HWACC // hardware access through external memory (i.e. CAN) |
| |
| // These types can be adjusted by users to match application requirements. The goal is to |
| // minimize code memory and maximize speed. |
| #define GENERIC // generic pointer to point to application data |
| // Variables with this attribute can be located in external |
| // or internal data memory. |
| #define MEM // Memory attribute to optimize speed and code of pointer access. |
| |
| #ifndef NEAR |
| #define NEAR // variables mapped to internal data storage location |
| #endif |
| |
| #ifndef FAR |
| #define FAR far // variables mapped to external data storage location |
| #endif |
| |
| #ifndef CONST |
| #define CONST const // variables mapped to ROM (i.e. flash) |
| #endif |
| |
| #define LARGE |
| |
| #define REENTRANT |
| #define PUBLIC _far _pascal _export |
| |
| #ifndef NDEBUG |
| #ifndef TRACE |
| #define TRACE trace |
| #ifdef __cplusplus |
| extern "C" |
| { |
| #endif |
| void trace (const char *fmt, ...); |
| #ifdef __cplusplus |
| } |
| #endif |
| #endif |
| #endif |
| |
| #endif |
| |
| |
| // ------------------ WIN32 --------------------------------------------- |
| |
| #if (TARGET_SYSTEM == _WIN32_) |
| |
| #define ROM // code or variables mapped to ROM (i.e. flash) |
| // usage: CONST BYTE ROM foo = 0x00; |
| #define HWACC // hardware access through external memory (i.e. CAN) |
| |
| // These types can be adjusted by users to match application requirements. The goal is to |
| // minimize code memory and maximize speed. |
| #define GENERIC // generic pointer to point to application data |
| // Variables with this attribute can be located in external |
| // or internal data memory. |
| #define MEM // Memory attribute to optimize speed and code of pointer access. |
| |
| #ifndef NEAR |
| #define NEAR // variables mapped to internal data storage location |
| #endif |
| |
| #ifndef FAR |
| #define FAR // variables mapped to external data storage location |
| #endif |
| |
| #ifndef CONST |
| #define CONST const // variables mapped to ROM (i.e. flash) |
| #endif |
| |
| #define LARGE |
| |
| #define REENTRANT |
| #define PUBLIC __stdcall |
| |
| #ifndef QWORD |
| //#define QWORD long long int // MSVC .NET can use "long long int" too (like GNU) |
| #define QWORD __int64 |
| #endif |
| |
| #ifndef NDEBUG |
| #ifndef TRACE |
| #define TRACE trace |
| #ifdef __cplusplus |
| extern "C" |
| { |
| #endif |
| void trace (const char *fmt, ...); |
| #ifdef __cplusplus |
| } |
| #endif |
| #endif |
| #endif |
| |
| // MS Visual C++ compiler supports function inlining |
| #define INLINE_FUNCTION_DEF __forceinline |
| |
| // to actually enable inlining just include the following two lines |
| // #define INLINE_FUNCTION INLINE_FUNCTION_DEF |
| // #define INLINE_ENABLED TRUE |
| |
| #endif |
| |
| #endif // ===> PC |
| |
| |
| //--------------------------------------------------------------------------- |
| // definitions of basic types |
| //--------------------------------------------------------------------------- |
| |
| #ifndef _WINDEF_ // defined in WINDEF.H, included by <windows.h> |
| |
| // --- arithmetic types --- |
| #ifndef SHORT |
| #define SHORT short int |
| #endif |
| |
| #ifndef USHORT |
| #define USHORT unsigned short int |
| #endif |
| |
| #ifndef INT |
| #define INT int |
| #endif |
| |
| #ifndef UINT |
| #define UINT unsigned int |
| #endif |
| |
| #ifndef LONG |
| #define LONG long int |
| #endif |
| |
| #ifndef ULONG |
| #define ULONG unsigned long int |
| #endif |
| |
| |
| // --- logic types --- |
| #ifndef BYTE |
| #define BYTE unsigned char |
| #endif |
| |
| #ifndef WORD |
| #define WORD unsigned short int |
| #endif |
| |
| #ifndef DWORD |
| #define DWORD unsigned long int |
| #endif |
| |
| #ifndef BOOL |
| #define BOOL unsigned char |
| #endif |
| |
| |
| // --- alias types --- |
| #ifndef TRUE |
| #define TRUE 0xFF |
| #endif |
| |
| #ifndef FALSE |
| #define FALSE 0x00 |
| #endif |
| |
| #ifndef NULL |
| #define NULL ((void *) 0) |
| #endif |
| |
| #endif |
| |
| |
| #ifndef _TIME_OF_DAY_DEFINED_ |
| |
| typedef struct |
| { |
| unsigned long int m_dwMs; |
| unsigned short int m_wDays; |
| |
| } tTimeOfDay; |
| |
| #define _TIME_OF_DAY_DEFINED_ |
| |
| #endif |
| |
| |
| //--------------------------------------------------------------------------- |
| // Definition von TRACE |
| //--------------------------------------------------------------------------- |
| |
| #ifndef NDEBUG |
| |
| #ifndef TRACE0 |
| #define TRACE0(p0) TRACE(p0) |
| #endif |
| |
| #ifndef TRACE1 |
| #define TRACE1(p0, p1) TRACE(p0, p1) |
| #endif |
| |
| #ifndef TRACE2 |
| #define TRACE2(p0, p1, p2) TRACE(p0, p1, p2) |
| #endif |
| |
| #ifndef TRACE3 |
| #define TRACE3(p0, p1, p2, p3) TRACE(p0, p1, p2, p3) |
| #endif |
| |
| #ifndef TRACE4 |
| #define TRACE4(p0, p1, p2, p3, p4) TRACE(p0, p1, p2, p3, p4) |
| #endif |
| |
| #ifndef TRACE5 |
| #define TRACE5(p0, p1, p2, p3, p4, p5) TRACE(p0, p1, p2, p3, p4, p5) |
| #endif |
| |
| #ifndef TRACE6 |
| #define TRACE6(p0, p1, p2, p3, p4, p5, p6) TRACE(p0, p1, p2, p3, p4, p5, p6) |
| #endif |
| |
| #else |
| |
| #ifndef TRACE0 |
| #define TRACE0(p0) |
| #endif |
| |
| #ifndef TRACE1 |
| #define TRACE1(p0, p1) |
| #endif |
| |
| #ifndef TRACE2 |
| #define TRACE2(p0, p1, p2) |
| #endif |
| |
| #ifndef TRACE3 |
| #define TRACE3(p0, p1, p2, p3) |
| #endif |
| |
| #ifndef TRACE4 |
| #define TRACE4(p0, p1, p2, p3, p4) |
| #endif |
| |
| #ifndef TRACE5 |
| #define TRACE5(p0, p1, p2, p3, p4, p5) |
| #endif |
| |
| #ifndef TRACE6 |
| #define TRACE6(p0, p1, p2, p3, p4, p5, p6) |
| #endif |
| |
| #endif |
| |
| |
| |
| //--------------------------------------------------------------------------- |
| // definition of ASSERT |
| //--------------------------------------------------------------------------- |
| |
| #ifndef ASSERT |
| #if !defined (__linux__) && !defined (__KERNEL__) |
| #include <assert.h> |
| #ifndef ASSERT |
| #define ASSERT(p) assert(p) |
| #endif |
| #else |
| #define ASSERT(p) |
| #endif |
| #endif |
| |
| |
| //--------------------------------------------------------------------------- |
| // SYS TEC extensions |
| //--------------------------------------------------------------------------- |
| |
| // This macro doesn't print out C-file and line number of the failed assertion |
| // but a string, which exactly names the mistake. |
| #ifndef NDEBUG |
| |
| #define ASSERTMSG(expr,string) if (!(expr)) {\ |
| PRINTF0 ("Assertion failed: " string );\ |
| while (1);} |
| #else |
| #define ASSERTMSG(expr,string) |
| #endif |
| |
| |
| |
| |
| //--------------------------------------------------------------------------- |
| |
| #endif // #ifndef _GLOBAL_H_ |
| |
| // Please keep an empty line at the end of this file. |
| |
