blob: 96b2ca1f1b06d7a104f5d60fa6154b4eae8783de [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/drivers/mmc/core/host.c
*
* Copyright (C) 2003 Russell King, All Rights Reserved.
* Copyright (C) 2007-2008 Pierre Ossman
* Copyright (C) 2010 Linus Walleij
*
* MMC host class device management
*/
#include <linux/device.h>
#include <linux/err.h>
#include <linux/idr.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/pagemap.h>
#include <linux/pm_wakeup.h>
#include <linux/export.h>
#include <linux/leds.h>
#include <linux/slab.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#include <linux/mmc/slot-gpio.h>
#include "core.h"
#include "host.h"
#include "slot-gpio.h"
#include "pwrseq.h"
#include "sdio_ops.h"
#define cls_dev_to_mmc_host(d) container_of(d, struct mmc_host, class_dev)
static DEFINE_IDA(mmc_host_ida);
static void mmc_host_classdev_release(struct device *dev)
{
struct mmc_host *host = cls_dev_to_mmc_host(dev);
wakeup_source_unregister(host->ws);
ida_simple_remove(&mmc_host_ida, host->index);
kfree(host);
}
static struct class mmc_host_class = {
.name = "mmc_host",
.dev_release = mmc_host_classdev_release,
};
int mmc_register_host_class(void)
{
return class_register(&mmc_host_class);
}
void mmc_unregister_host_class(void)
{
class_unregister(&mmc_host_class);
}
void mmc_retune_enable(struct mmc_host *host)
{
host->can_retune = 1;
if (host->retune_period)
mod_timer(&host->retune_timer,
jiffies + host->retune_period * HZ);
}
/*
* Pause re-tuning for a small set of operations. The pause begins after the
* next command and after first doing re-tuning.
*/
void mmc_retune_pause(struct mmc_host *host)
{
if (!host->retune_paused) {
host->retune_paused = 1;
mmc_retune_needed(host);
mmc_retune_hold(host);
}
}
EXPORT_SYMBOL(mmc_retune_pause);
void mmc_retune_unpause(struct mmc_host *host)
{
if (host->retune_paused) {
host->retune_paused = 0;
mmc_retune_release(host);
}
}
EXPORT_SYMBOL(mmc_retune_unpause);
void mmc_retune_disable(struct mmc_host *host)
{
mmc_retune_unpause(host);
host->can_retune = 0;
del_timer_sync(&host->retune_timer);
host->retune_now = 0;
host->need_retune = 0;
}
void mmc_retune_timer_stop(struct mmc_host *host)
{
del_timer_sync(&host->retune_timer);
}
EXPORT_SYMBOL(mmc_retune_timer_stop);
void mmc_retune_hold(struct mmc_host *host)
{
if (!host->hold_retune)
host->retune_now = 1;
host->hold_retune += 1;
}
void mmc_retune_release(struct mmc_host *host)
{
if (host->hold_retune)
host->hold_retune -= 1;
else
WARN_ON(1);
}
EXPORT_SYMBOL(mmc_retune_release);
int mmc_retune(struct mmc_host *host)
{
bool return_to_hs400 = false;
int err;
if (host->retune_now)
host->retune_now = 0;
else
return 0;
if (!host->need_retune || host->doing_retune || !host->card)
return 0;
host->need_retune = 0;
host->doing_retune = 1;
if (host->ios.timing == MMC_TIMING_MMC_HS400) {
err = mmc_hs400_to_hs200(host->card);
if (err)
goto out;
return_to_hs400 = true;
}
err = mmc_execute_tuning(host->card);
if (err)
goto out;
if (return_to_hs400)
err = mmc_hs200_to_hs400(host->card);
out:
host->doing_retune = 0;
return err;
}
static void mmc_retune_timer(struct timer_list *t)
{
struct mmc_host *host = from_timer(host, t, retune_timer);
mmc_retune_needed(host);
}
/**
* mmc_of_parse() - parse host's device-tree node
* @host: host whose node should be parsed.
*
* To keep the rest of the MMC subsystem unaware of whether DT has been
* used to to instantiate and configure this host instance or not, we
* parse the properties and set respective generic mmc-host flags and
* parameters.
*/
int mmc_of_parse(struct mmc_host *host)
{
struct device *dev = host->parent;
u32 bus_width, drv_type, cd_debounce_delay_ms;
int ret;
if (!dev || !dev_fwnode(dev))
return 0;
/* "bus-width" is translated to MMC_CAP_*_BIT_DATA flags */
if (device_property_read_u32(dev, "bus-width", &bus_width) < 0) {
dev_dbg(host->parent,
"\"bus-width\" property is missing, assuming 1 bit.\n");
bus_width = 1;
}
switch (bus_width) {
case 8:
host->caps |= MMC_CAP_8_BIT_DATA;
fallthrough; /* Hosts capable of 8-bit can also do 4 bits */
case 4:
host->caps |= MMC_CAP_4_BIT_DATA;
break;
case 1:
break;
default:
dev_err(host->parent,
"Invalid \"bus-width\" value %u!\n", bus_width);
return -EINVAL;
}
/* f_max is obtained from the optional "max-frequency" property */
device_property_read_u32(dev, "max-frequency", &host->f_max);
/*
* Configure CD and WP pins. They are both by default active low to
* match the SDHCI spec. If GPIOs are provided for CD and / or WP, the
* mmc-gpio helpers are used to attach, configure and use them. If
* polarity inversion is specified in DT, one of MMC_CAP2_CD_ACTIVE_HIGH
* and MMC_CAP2_RO_ACTIVE_HIGH capability-2 flags is set. If the
* "broken-cd" property is provided, the MMC_CAP_NEEDS_POLL capability
* is set. If the "non-removable" property is found, the
* MMC_CAP_NONREMOVABLE capability is set and no card-detection
* configuration is performed.
*/
/* Parse Card Detection */
if (device_property_read_bool(dev, "non-removable")) {
host->caps |= MMC_CAP_NONREMOVABLE;
} else {
if (device_property_read_bool(dev, "cd-inverted"))
host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
if (device_property_read_u32(dev, "cd-debounce-delay-ms",
&cd_debounce_delay_ms))
cd_debounce_delay_ms = 200;
if (device_property_read_bool(dev, "broken-cd"))
host->caps |= MMC_CAP_NEEDS_POLL;
ret = mmc_gpiod_request_cd(host, "cd", 0, false,
cd_debounce_delay_ms * 1000);
if (!ret)
dev_info(host->parent, "Got CD GPIO\n");
else if (ret != -ENOENT && ret != -ENOSYS)
return ret;
}
/* Parse Write Protection */
if (device_property_read_bool(dev, "wp-inverted"))
host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
ret = mmc_gpiod_request_ro(host, "wp", 0, 0);
if (!ret)
dev_info(host->parent, "Got WP GPIO\n");
else if (ret != -ENOENT && ret != -ENOSYS)
return ret;
if (device_property_read_bool(dev, "disable-wp"))
host->caps2 |= MMC_CAP2_NO_WRITE_PROTECT;
if (device_property_read_bool(dev, "cap-sd-highspeed"))
host->caps |= MMC_CAP_SD_HIGHSPEED;
if (device_property_read_bool(dev, "cap-mmc-highspeed"))
host->caps |= MMC_CAP_MMC_HIGHSPEED;
if (device_property_read_bool(dev, "sd-uhs-sdr12"))
host->caps |= MMC_CAP_UHS_SDR12;
if (device_property_read_bool(dev, "sd-uhs-sdr25"))
host->caps |= MMC_CAP_UHS_SDR25;
if (device_property_read_bool(dev, "sd-uhs-sdr50"))
host->caps |= MMC_CAP_UHS_SDR50;
if (device_property_read_bool(dev, "sd-uhs-sdr104"))
host->caps |= MMC_CAP_UHS_SDR104;
if (device_property_read_bool(dev, "sd-uhs-ddr50"))
host->caps |= MMC_CAP_UHS_DDR50;
if (device_property_read_bool(dev, "cap-power-off-card"))
host->caps |= MMC_CAP_POWER_OFF_CARD;
if (device_property_read_bool(dev, "cap-mmc-hw-reset"))
host->caps |= MMC_CAP_HW_RESET;
if (device_property_read_bool(dev, "cap-sdio-irq"))
host->caps |= MMC_CAP_SDIO_IRQ;
if (device_property_read_bool(dev, "full-pwr-cycle"))
host->caps2 |= MMC_CAP2_FULL_PWR_CYCLE;
if (device_property_read_bool(dev, "full-pwr-cycle-in-suspend"))
host->caps2 |= MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND;
if (device_property_read_bool(dev, "keep-power-in-suspend"))
host->pm_caps |= MMC_PM_KEEP_POWER;
if (device_property_read_bool(dev, "wakeup-source") ||
device_property_read_bool(dev, "enable-sdio-wakeup")) /* legacy */
host->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
if (device_property_read_bool(dev, "mmc-ddr-3_3v"))
host->caps |= MMC_CAP_3_3V_DDR;
if (device_property_read_bool(dev, "mmc-ddr-1_8v"))
host->caps |= MMC_CAP_1_8V_DDR;
if (device_property_read_bool(dev, "mmc-ddr-1_2v"))
host->caps |= MMC_CAP_1_2V_DDR;
if (device_property_read_bool(dev, "mmc-hs200-1_8v"))
host->caps2 |= MMC_CAP2_HS200_1_8V_SDR;
if (device_property_read_bool(dev, "mmc-hs200-1_2v"))
host->caps2 |= MMC_CAP2_HS200_1_2V_SDR;
if (device_property_read_bool(dev, "mmc-hs400-1_8v"))
host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR;
if (device_property_read_bool(dev, "mmc-hs400-1_2v"))
host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR;
if (device_property_read_bool(dev, "mmc-hs400-enhanced-strobe"))
host->caps2 |= MMC_CAP2_HS400_ES;
if (device_property_read_bool(dev, "no-sdio"))
host->caps2 |= MMC_CAP2_NO_SDIO;
if (device_property_read_bool(dev, "no-sd"))
host->caps2 |= MMC_CAP2_NO_SD;
if (device_property_read_bool(dev, "no-mmc"))
host->caps2 |= MMC_CAP2_NO_MMC;
/* Must be after "non-removable" check */
if (device_property_read_u32(dev, "fixed-emmc-driver-type", &drv_type) == 0) {
if (host->caps & MMC_CAP_NONREMOVABLE)
host->fixed_drv_type = drv_type;
else
dev_err(host->parent,
"can't use fixed driver type, media is removable\n");
}
host->dsr_req = !device_property_read_u32(dev, "dsr", &host->dsr);
if (host->dsr_req && (host->dsr & ~0xffff)) {
dev_err(host->parent,
"device tree specified broken value for DSR: 0x%x, ignoring\n",
host->dsr);
host->dsr_req = 0;
}
device_property_read_u32(dev, "post-power-on-delay-ms",
&host->ios.power_delay_ms);
return mmc_pwrseq_alloc(host);
}
EXPORT_SYMBOL(mmc_of_parse);
/**
* mmc_of_parse_voltage - return mask of supported voltages
* @np: The device node need to be parsed.
* @mask: mask of voltages available for MMC/SD/SDIO
*
* Parse the "voltage-ranges" DT property, returning zero if it is not
* found, negative errno if the voltage-range specification is invalid,
* or one if the voltage-range is specified and successfully parsed.
*/
int mmc_of_parse_voltage(struct device_node *np, u32 *mask)
{
const u32 *voltage_ranges;
int num_ranges, i;
voltage_ranges = of_get_property(np, "voltage-ranges", &num_ranges);
if (!voltage_ranges) {
pr_debug("%pOF: voltage-ranges unspecified\n", np);
return 0;
}
num_ranges = num_ranges / sizeof(*voltage_ranges) / 2;
if (!num_ranges) {
pr_err("%pOF: voltage-ranges empty\n", np);
return -EINVAL;
}
for (i = 0; i < num_ranges; i++) {
const int j = i * 2;
u32 ocr_mask;
ocr_mask = mmc_vddrange_to_ocrmask(
be32_to_cpu(voltage_ranges[j]),
be32_to_cpu(voltage_ranges[j + 1]));
if (!ocr_mask) {
pr_err("%pOF: voltage-range #%d is invalid\n",
np, i);
return -EINVAL;
}
*mask |= ocr_mask;
}
return 1;
}
EXPORT_SYMBOL(mmc_of_parse_voltage);
/**
* mmc_first_nonreserved_index() - get the first index that is not reserved
*/
static int mmc_first_nonreserved_index(void)
{
int max;
max = of_alias_get_highest_id("mmc");
if (max < 0)
return 0;
return max + 1;
}
/**
* mmc_alloc_host - initialise the per-host structure.
* @extra: sizeof private data structure
* @dev: pointer to host device model structure
*
* Initialise the per-host structure.
*/
struct mmc_host *mmc_alloc_host(int extra, struct device *dev)
{
int err;
struct mmc_host *host;
int alias_id, min_idx, max_idx;
host = kzalloc(sizeof(struct mmc_host) + extra, GFP_KERNEL);
if (!host)
return NULL;
/* scanning will be enabled when we're ready */
host->rescan_disable = 1;
alias_id = of_alias_get_id(dev->of_node, "mmc");
if (alias_id >= 0) {
min_idx = alias_id;
max_idx = alias_id + 1;
} else {
min_idx = mmc_first_nonreserved_index();
max_idx = 0;
}
err = ida_simple_get(&mmc_host_ida, min_idx, max_idx, GFP_KERNEL);
if (err < 0) {
kfree(host);
return NULL;
}
host->index = err;
dev_set_name(&host->class_dev, "mmc%d", host->index);
host->ws = wakeup_source_register(NULL, dev_name(&host->class_dev));
host->parent = dev;
host->class_dev.parent = dev;
host->class_dev.class = &mmc_host_class;
device_initialize(&host->class_dev);
device_enable_async_suspend(&host->class_dev);
if (mmc_gpio_alloc(host)) {
put_device(&host->class_dev);
return NULL;
}
spin_lock_init(&host->lock);
init_waitqueue_head(&host->wq);
INIT_DELAYED_WORK(&host->detect, mmc_rescan);
INIT_DELAYED_WORK(&host->sdio_irq_work, sdio_irq_work);
timer_setup(&host->retune_timer, mmc_retune_timer, 0);
/*
* By default, hosts do not support SGIO or large requests.
* They have to set these according to their abilities.
*/
host->max_segs = 1;
host->max_seg_size = PAGE_SIZE;
host->max_req_size = PAGE_SIZE;
host->max_blk_size = 512;
host->max_blk_count = PAGE_SIZE / 512;
host->fixed_drv_type = -EINVAL;
host->ios.power_delay_ms = 10;
host->ios.power_mode = MMC_POWER_UNDEFINED;
return host;
}
EXPORT_SYMBOL(mmc_alloc_host);
/**
* mmc_add_host - initialise host hardware
* @host: mmc host
*
* Register the host with the driver model. The host must be
* prepared to start servicing requests before this function
* completes.
*/
int mmc_add_host(struct mmc_host *host)
{
int err;
WARN_ON((host->caps & MMC_CAP_SDIO_IRQ) &&
!host->ops->enable_sdio_irq);
err = device_add(&host->class_dev);
if (err)
return err;
led_trigger_register_simple(dev_name(&host->class_dev), &host->led);
#ifdef CONFIG_DEBUG_FS
mmc_add_host_debugfs(host);
#endif
mmc_start_host(host);
mmc_register_pm_notifier(host);
return 0;
}
EXPORT_SYMBOL(mmc_add_host);
/**
* mmc_remove_host - remove host hardware
* @host: mmc host
*
* Unregister and remove all cards associated with this host,
* and power down the MMC bus. No new requests will be issued
* after this function has returned.
*/
void mmc_remove_host(struct mmc_host *host)
{
mmc_unregister_pm_notifier(host);
mmc_stop_host(host);
#ifdef CONFIG_DEBUG_FS
mmc_remove_host_debugfs(host);
#endif
device_del(&host->class_dev);
led_trigger_unregister_simple(host->led);
}
EXPORT_SYMBOL(mmc_remove_host);
/**
* mmc_free_host - free the host structure
* @host: mmc host
*
* Free the host once all references to it have been dropped.
*/
void mmc_free_host(struct mmc_host *host)
{
mmc_pwrseq_free(host);
put_device(&host->class_dev);
}
EXPORT_SYMBOL(mmc_free_host);