| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * DAMON-based page reclamation |
| * |
| * Author: SeongJae Park <sj@kernel.org> |
| */ |
| |
| #define pr_fmt(fmt) "damon-reclaim: " fmt |
| |
| #include <linux/damon.h> |
| #include <linux/ioport.h> |
| #include <linux/module.h> |
| #include <linux/sched.h> |
| #include <linux/workqueue.h> |
| |
| #ifdef MODULE_PARAM_PREFIX |
| #undef MODULE_PARAM_PREFIX |
| #endif |
| #define MODULE_PARAM_PREFIX "damon_reclaim." |
| |
| /* |
| * Enable or disable DAMON_RECLAIM. |
| * |
| * You can enable DAMON_RCLAIM by setting the value of this parameter as ``Y``. |
| * Setting it as ``N`` disables DAMON_RECLAIM. Note that DAMON_RECLAIM could |
| * do no real monitoring and reclamation due to the watermarks-based activation |
| * condition. Refer to below descriptions for the watermarks parameter for |
| * this. |
| */ |
| static bool enabled __read_mostly; |
| |
| /* |
| * Make DAMON_RECLAIM reads the input parameters again, except ``enabled``. |
| * |
| * Input parameters that updated while DAMON_RECLAIM is running are not applied |
| * by default. Once this parameter is set as ``Y``, DAMON_RECLAIM reads values |
| * of parametrs except ``enabled`` again. Once the re-reading is done, this |
| * parameter is set as ``N``. If invalid parameters are found while the |
| * re-reading, DAMON_RECLAIM will be disabled. |
| */ |
| static bool commit_inputs __read_mostly; |
| module_param(commit_inputs, bool, 0600); |
| |
| /* |
| * Time threshold for cold memory regions identification in microseconds. |
| * |
| * If a memory region is not accessed for this or longer time, DAMON_RECLAIM |
| * identifies the region as cold, and reclaims. 120 seconds by default. |
| */ |
| static unsigned long min_age __read_mostly = 120000000; |
| module_param(min_age, ulong, 0600); |
| |
| /* |
| * Limit of time for trying the reclamation in milliseconds. |
| * |
| * DAMON_RECLAIM tries to use only up to this time within a time window |
| * (quota_reset_interval_ms) for trying reclamation of cold pages. This can be |
| * used for limiting CPU consumption of DAMON_RECLAIM. If the value is zero, |
| * the limit is disabled. |
| * |
| * 10 ms by default. |
| */ |
| static unsigned long quota_ms __read_mostly = 10; |
| module_param(quota_ms, ulong, 0600); |
| |
| /* |
| * Limit of size of memory for the reclamation in bytes. |
| * |
| * DAMON_RECLAIM charges amount of memory which it tried to reclaim within a |
| * time window (quota_reset_interval_ms) and makes no more than this limit is |
| * tried. This can be used for limiting consumption of CPU and IO. If this |
| * value is zero, the limit is disabled. |
| * |
| * 128 MiB by default. |
| */ |
| static unsigned long quota_sz __read_mostly = 128 * 1024 * 1024; |
| module_param(quota_sz, ulong, 0600); |
| |
| /* |
| * The time/size quota charge reset interval in milliseconds. |
| * |
| * The charge reset interval for the quota of time (quota_ms) and size |
| * (quota_sz). That is, DAMON_RECLAIM does not try reclamation for more than |
| * quota_ms milliseconds or quota_sz bytes within quota_reset_interval_ms |
| * milliseconds. |
| * |
| * 1 second by default. |
| */ |
| static unsigned long quota_reset_interval_ms __read_mostly = 1000; |
| module_param(quota_reset_interval_ms, ulong, 0600); |
| |
| /* |
| * The watermarks check time interval in microseconds. |
| * |
| * Minimal time to wait before checking the watermarks, when DAMON_RECLAIM is |
| * enabled but inactive due to its watermarks rule. 5 seconds by default. |
| */ |
| static unsigned long wmarks_interval __read_mostly = 5000000; |
| module_param(wmarks_interval, ulong, 0600); |
| |
| /* |
| * Free memory rate (per thousand) for the high watermark. |
| * |
| * If free memory of the system in bytes per thousand bytes is higher than |
| * this, DAMON_RECLAIM becomes inactive, so it does nothing but periodically |
| * checks the watermarks. 500 (50%) by default. |
| */ |
| static unsigned long wmarks_high __read_mostly = 500; |
| module_param(wmarks_high, ulong, 0600); |
| |
| /* |
| * Free memory rate (per thousand) for the middle watermark. |
| * |
| * If free memory of the system in bytes per thousand bytes is between this and |
| * the low watermark, DAMON_RECLAIM becomes active, so starts the monitoring |
| * and the reclaiming. 400 (40%) by default. |
| */ |
| static unsigned long wmarks_mid __read_mostly = 400; |
| module_param(wmarks_mid, ulong, 0600); |
| |
| /* |
| * Free memory rate (per thousand) for the low watermark. |
| * |
| * If free memory of the system in bytes per thousand bytes is lower than this, |
| * DAMON_RECLAIM becomes inactive, so it does nothing but periodically checks |
| * the watermarks. In the case, the system falls back to the LRU-based page |
| * granularity reclamation logic. 200 (20%) by default. |
| */ |
| static unsigned long wmarks_low __read_mostly = 200; |
| module_param(wmarks_low, ulong, 0600); |
| |
| /* |
| * Sampling interval for the monitoring in microseconds. |
| * |
| * The sampling interval of DAMON for the cold memory monitoring. Please refer |
| * to the DAMON documentation for more detail. 5 ms by default. |
| */ |
| static unsigned long sample_interval __read_mostly = 5000; |
| module_param(sample_interval, ulong, 0600); |
| |
| /* |
| * Aggregation interval for the monitoring in microseconds. |
| * |
| * The aggregation interval of DAMON for the cold memory monitoring. Please |
| * refer to the DAMON documentation for more detail. 100 ms by default. |
| */ |
| static unsigned long aggr_interval __read_mostly = 100000; |
| module_param(aggr_interval, ulong, 0600); |
| |
| /* |
| * Minimum number of monitoring regions. |
| * |
| * The minimal number of monitoring regions of DAMON for the cold memory |
| * monitoring. This can be used to set lower-bound of the monitoring quality. |
| * But, setting this too high could result in increased monitoring overhead. |
| * Please refer to the DAMON documentation for more detail. 10 by default. |
| */ |
| static unsigned long min_nr_regions __read_mostly = 10; |
| module_param(min_nr_regions, ulong, 0600); |
| |
| /* |
| * Maximum number of monitoring regions. |
| * |
| * The maximum number of monitoring regions of DAMON for the cold memory |
| * monitoring. This can be used to set upper-bound of the monitoring overhead. |
| * However, setting this too low could result in bad monitoring quality. |
| * Please refer to the DAMON documentation for more detail. 1000 by default. |
| */ |
| static unsigned long max_nr_regions __read_mostly = 1000; |
| module_param(max_nr_regions, ulong, 0600); |
| |
| /* |
| * Start of the target memory region in physical address. |
| * |
| * The start physical address of memory region that DAMON_RECLAIM will do work |
| * against. By default, biggest System RAM is used as the region. |
| */ |
| static unsigned long monitor_region_start __read_mostly; |
| module_param(monitor_region_start, ulong, 0600); |
| |
| /* |
| * End of the target memory region in physical address. |
| * |
| * The end physical address of memory region that DAMON_RECLAIM will do work |
| * against. By default, biggest System RAM is used as the region. |
| */ |
| static unsigned long monitor_region_end __read_mostly; |
| module_param(monitor_region_end, ulong, 0600); |
| |
| /* |
| * PID of the DAMON thread |
| * |
| * If DAMON_RECLAIM is enabled, this becomes the PID of the worker thread. |
| * Else, -1. |
| */ |
| static int kdamond_pid __read_mostly = -1; |
| module_param(kdamond_pid, int, 0400); |
| |
| /* |
| * Number of memory regions that tried to be reclaimed. |
| */ |
| static unsigned long nr_reclaim_tried_regions __read_mostly; |
| module_param(nr_reclaim_tried_regions, ulong, 0400); |
| |
| /* |
| * Total bytes of memory regions that tried to be reclaimed. |
| */ |
| static unsigned long bytes_reclaim_tried_regions __read_mostly; |
| module_param(bytes_reclaim_tried_regions, ulong, 0400); |
| |
| /* |
| * Number of memory regions that successfully be reclaimed. |
| */ |
| static unsigned long nr_reclaimed_regions __read_mostly; |
| module_param(nr_reclaimed_regions, ulong, 0400); |
| |
| /* |
| * Total bytes of memory regions that successfully be reclaimed. |
| */ |
| static unsigned long bytes_reclaimed_regions __read_mostly; |
| module_param(bytes_reclaimed_regions, ulong, 0400); |
| |
| /* |
| * Number of times that the time/space quota limits have exceeded |
| */ |
| static unsigned long nr_quota_exceeds __read_mostly; |
| module_param(nr_quota_exceeds, ulong, 0400); |
| |
| static struct damon_ctx *ctx; |
| static struct damon_target *target; |
| |
| struct damon_reclaim_ram_walk_arg { |
| unsigned long start; |
| unsigned long end; |
| }; |
| |
| static int walk_system_ram(struct resource *res, void *arg) |
| { |
| struct damon_reclaim_ram_walk_arg *a = arg; |
| |
| if (a->end - a->start < resource_size(res)) { |
| a->start = res->start; |
| a->end = res->end; |
| } |
| return 0; |
| } |
| |
| /* |
| * Find biggest 'System RAM' resource and store its start and end address in |
| * @start and @end, respectively. If no System RAM is found, returns false. |
| */ |
| static bool get_monitoring_region(unsigned long *start, unsigned long *end) |
| { |
| struct damon_reclaim_ram_walk_arg arg = {}; |
| |
| walk_system_ram_res(0, ULONG_MAX, &arg, walk_system_ram); |
| if (arg.end <= arg.start) |
| return false; |
| |
| *start = arg.start; |
| *end = arg.end; |
| return true; |
| } |
| |
| static struct damos *damon_reclaim_new_scheme(void) |
| { |
| struct damos_watermarks wmarks = { |
| .metric = DAMOS_WMARK_FREE_MEM_RATE, |
| .interval = wmarks_interval, |
| .high = wmarks_high, |
| .mid = wmarks_mid, |
| .low = wmarks_low, |
| }; |
| struct damos_quota quota = { |
| /* |
| * Do not try reclamation for more than quota_ms milliseconds |
| * or quota_sz bytes within quota_reset_interval_ms. |
| */ |
| .ms = quota_ms, |
| .sz = quota_sz, |
| .reset_interval = quota_reset_interval_ms, |
| /* Within the quota, page out older regions first. */ |
| .weight_sz = 0, |
| .weight_nr_accesses = 0, |
| .weight_age = 1 |
| }; |
| struct damos *scheme = damon_new_scheme( |
| /* Find regions having PAGE_SIZE or larger size */ |
| PAGE_SIZE, ULONG_MAX, |
| /* and not accessed at all */ |
| 0, 0, |
| /* for min_age or more micro-seconds, and */ |
| min_age / aggr_interval, UINT_MAX, |
| /* page out those, as soon as found */ |
| DAMOS_PAGEOUT, |
| /* under the quota. */ |
| "a, |
| /* (De)activate this according to the watermarks. */ |
| &wmarks); |
| |
| return scheme; |
| } |
| |
| static int damon_reclaim_apply_parameters(void) |
| { |
| struct damos *scheme; |
| struct damon_addr_range addr_range; |
| int err = 0; |
| |
| err = damon_set_attrs(ctx, sample_interval, aggr_interval, 0, |
| min_nr_regions, max_nr_regions); |
| if (err) |
| return err; |
| |
| /* Will be freed by next 'damon_set_schemes()' below */ |
| scheme = damon_reclaim_new_scheme(); |
| if (!scheme) |
| return -ENOMEM; |
| err = damon_set_schemes(ctx, &scheme, 1); |
| if (err) |
| return err; |
| |
| if (monitor_region_start > monitor_region_end) |
| return -EINVAL; |
| if (!monitor_region_start && !monitor_region_end && |
| !get_monitoring_region(&monitor_region_start, |
| &monitor_region_end)) |
| return -EINVAL; |
| addr_range.start = monitor_region_start; |
| addr_range.end = monitor_region_end; |
| return damon_set_regions(target, &addr_range, 1); |
| } |
| |
| static int damon_reclaim_turn(bool on) |
| { |
| int err; |
| |
| if (!on) { |
| err = damon_stop(&ctx, 1); |
| if (!err) |
| kdamond_pid = -1; |
| return err; |
| } |
| |
| err = damon_reclaim_apply_parameters(); |
| if (err) |
| return err; |
| |
| err = damon_start(&ctx, 1, true); |
| if (err) |
| return err; |
| kdamond_pid = ctx->kdamond->pid; |
| return 0; |
| } |
| |
| #define ENABLE_CHECK_INTERVAL_MS 1000 |
| static struct delayed_work damon_reclaim_timer; |
| static void damon_reclaim_timer_fn(struct work_struct *work) |
| { |
| static bool last_enabled; |
| bool now_enabled; |
| |
| now_enabled = enabled; |
| if (last_enabled != now_enabled) { |
| if (!damon_reclaim_turn(now_enabled)) |
| last_enabled = now_enabled; |
| else |
| enabled = last_enabled; |
| } |
| |
| if (enabled) |
| schedule_delayed_work(&damon_reclaim_timer, |
| msecs_to_jiffies(ENABLE_CHECK_INTERVAL_MS)); |
| } |
| static DECLARE_DELAYED_WORK(damon_reclaim_timer, damon_reclaim_timer_fn); |
| |
| static bool damon_reclaim_initialized; |
| |
| static int enabled_store(const char *val, |
| const struct kernel_param *kp) |
| { |
| int rc = param_set_bool(val, kp); |
| |
| if (rc < 0) |
| return rc; |
| |
| /* system_wq might not initialized yet */ |
| if (!damon_reclaim_initialized) |
| return rc; |
| |
| if (enabled) |
| schedule_delayed_work(&damon_reclaim_timer, 0); |
| |
| return 0; |
| } |
| |
| static const struct kernel_param_ops enabled_param_ops = { |
| .set = enabled_store, |
| .get = param_get_bool, |
| }; |
| |
| module_param_cb(enabled, &enabled_param_ops, &enabled, 0600); |
| MODULE_PARM_DESC(enabled, |
| "Enable or disable DAMON_RECLAIM (default: disabled)"); |
| |
| static int damon_reclaim_after_aggregation(struct damon_ctx *c) |
| { |
| struct damos *s; |
| int err = 0; |
| |
| /* update the stats parameter */ |
| damon_for_each_scheme(s, c) { |
| nr_reclaim_tried_regions = s->stat.nr_tried; |
| bytes_reclaim_tried_regions = s->stat.sz_tried; |
| nr_reclaimed_regions = s->stat.nr_applied; |
| bytes_reclaimed_regions = s->stat.sz_applied; |
| nr_quota_exceeds = s->stat.qt_exceeds; |
| } |
| |
| if (commit_inputs) { |
| err = damon_reclaim_apply_parameters(); |
| commit_inputs = false; |
| } |
| return err; |
| } |
| |
| static int damon_reclaim_after_wmarks_check(struct damon_ctx *c) |
| { |
| int err = 0; |
| |
| if (commit_inputs) { |
| err = damon_reclaim_apply_parameters(); |
| commit_inputs = false; |
| } |
| return err; |
| } |
| |
| static int __init damon_reclaim_init(void) |
| { |
| ctx = damon_new_ctx(); |
| if (!ctx) |
| return -ENOMEM; |
| |
| if (damon_select_ops(ctx, DAMON_OPS_PADDR)) |
| return -EINVAL; |
| |
| ctx->callback.after_wmarks_check = damon_reclaim_after_wmarks_check; |
| ctx->callback.after_aggregation = damon_reclaim_after_aggregation; |
| |
| target = damon_new_target(); |
| if (!target) { |
| damon_destroy_ctx(ctx); |
| return -ENOMEM; |
| } |
| damon_add_target(ctx, target); |
| |
| schedule_delayed_work(&damon_reclaim_timer, 0); |
| |
| damon_reclaim_initialized = true; |
| return 0; |
| } |
| |
| module_init(damon_reclaim_init); |