Google Git
Sign in
android-kvm / linux / 9e0e29615a2077be852b1245b57c5b00fa609522 / . / drivers / staging / cxt1e1 / musycc.c
blob: 7a3a30cd0f7f557a0f53fcfeacd7223311cee4eb [file] [log] [blame]
static unsigned int max_intcnt = 0;
static unsigned int max_bh = 0;
/*-----------------------------------------------------------------------------
* musycc.c -
*
* Copyright (C) 2007 One Stop Systems, Inc.
* Copyright (C) 2003-2006 SBE, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* For further information, contact via email: support@onestopsystems.com
* One Stop Systems, Inc. Escondido, California U.S.A.
*-----------------------------------------------------------------------------
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/types.h>
#include "pmcc4_sysdep.h"
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include "sbecom_inline_linux.h"
#include "libsbew.h"
#include "pmcc4_private.h"
#include "pmcc4.h"
#include "musycc.h"
#define sd_find_chan(ci,ch) c4_find_chan(ch)
/*******************************************************************/
/* global driver variables */
extern ci_t *c4_list;
extern int drvr_state;
extern int cxt1e1_log_level;
extern int cxt1e1_max_mru;
extern int cxt1e1_max_mtu;
extern int max_rxdesc_used;
extern int max_txdesc_used;
extern ci_t *CI; /* dummy pointr to board ZEROE's data - DEBUG
* USAGE */
/*******************************************************************/
/* forward references */
void c4_fifo_free(mpi_t *, int);
void c4_wk_chan_restart(mch_t *);
void musycc_bh_tx_eom(mpi_t *, int);
int musycc_chan_up(ci_t *, int);
status_t __init musycc_init(ci_t *);
void musycc_intr_bh_tasklet(ci_t *);
void musycc_serv_req(mpi_t *, u_int32_t);
void musycc_update_timeslots(mpi_t *);
/*******************************************************************/
#if 1
static int
musycc_dump_rxbuffer_ring(mch_t *ch, int lockit)
{
struct mdesc *m;
unsigned long flags = 0;
u_int32_t status;
int n;
if (lockit)
spin_lock_irqsave(&ch->ch_rxlock, flags);
if (ch->rxd_num == 0)
pr_info(" ZERO receive buffers allocated for this channel.");
else {
FLUSH_MEM_READ();
m = &ch->mdr[ch->rxix_irq_srv];
for (n = ch->rxd_num; n; n--) {
status = le32_to_cpu(m->status);
{
pr_info("%c %08lx[%2d]: sts %08x (%c%c%c%c:%d.) Data [%08x] Next [%08x]\n",
(m == &ch->mdr[ch->rxix_irq_srv]) ? 'F' : ' ',
(unsigned long) m, n,
status,
m->data ? (status & HOST_RX_OWNED ? 'H' : 'M') : '-',
status & POLL_DISABLED ? 'P' : '-',
status & EOBIRQ_ENABLE ? 'b' : '-',
status & EOMIRQ_ENABLE ? 'm' : '-',
status & LENGTH_MASK,
le32_to_cpu(m->data), le32_to_cpu(m->next));
#ifdef RLD_DUMP_BUFDATA
{
u_int32_t *dp;
int len = status & LENGTH_MASK;
#if 1
if (m->data && (status & HOST_RX_OWNED))
#else
if (m->data) /* always dump regardless of valid RX
* data */
#endif
{
dp = (u_int32_t *) OS_phystov((void *) (le32_to_cpu(m->data)));
if (len >= 0x10)
pr_info(" %x[%x]: %08X %08X %08X %08x\n", (u_int32_t) dp, len,
*dp, *(dp + 1), *(dp + 2), *(dp + 3));
else if (len >= 0x08)
pr_info(" %x[%x]: %08X %08X\n", (u_int32_t) dp, len,
*dp, *(dp + 1));
else
pr_info(" %x[%x]: %08X\n", (u_int32_t) dp, len, *dp);
}
}
#endif
}
m = m->snext;
}
} /* -for- */
pr_info("\n");
if (lockit)
spin_unlock_irqrestore(&ch->ch_rxlock, flags);
return 0;
}
#endif
#if 1
static int
musycc_dump_txbuffer_ring(mch_t *ch, int lockit)
{
struct mdesc *m;
unsigned long flags = 0;
u_int32_t status;
int n;
if (lockit)
spin_lock_irqsave(&ch->ch_txlock, flags);
if (ch->txd_num == 0)
pr_info(" ZERO transmit buffers allocated for this channel.");
else {
FLUSH_MEM_READ();
m = ch->txd_irq_srv;
for (n = ch->txd_num; n; n--) {
status = le32_to_cpu(m->status);
{
pr_info("%c%c %08lx[%2d]: sts %08x (%c%c%c%c:%d.) Data [%08x] Next [%08x]\n",
(m == ch->txd_usr_add) ? 'F' : ' ',
(m == ch->txd_irq_srv) ? 'L' : ' ',
(unsigned long) m, n,
status,
m->data ? (status & MUSYCC_TX_OWNED ? 'M' : 'H') : '-',
status & POLL_DISABLED ? 'P' : '-',
status & EOBIRQ_ENABLE ? 'b' : '-',
status & EOMIRQ_ENABLE ? 'm' : '-',
status & LENGTH_MASK,
le32_to_cpu(m->data), le32_to_cpu(m->next));
#ifdef RLD_DUMP_BUFDATA
{
u_int32_t *dp;
int len = status & LENGTH_MASK;
if (m->data) {
dp = (u_int32_t *) OS_phystov((void *) (le32_to_cpu(m->data)));
if (len >= 0x10)
pr_info(" %x[%x]: %08X %08X %08X %08x\n", (u_int32_t) dp, len,
*dp, *(dp + 1), *(dp + 2), *(dp + 3));
else if (len >= 0x08)
pr_info(" %x[%x]: %08X %08X\n", (u_int32_t) dp, len,
*dp, *(dp + 1));
else
pr_info(" %x[%x]: %08X\n", (u_int32_t) dp, len, *dp);
}
}
#endif
}
m = m->snext;
}
} /* -for- */
pr_info("\n");
if (lockit)
spin_unlock_irqrestore(&ch->ch_txlock, flags);
return 0;
}
#endif
/*
* The following supports a backdoor debug facility which can be used to
* display the state of a board's channel.
*/
status_t
musycc_dump_ring(ci_t *ci, unsigned int chan)
{
mch_t *ch;
if (chan >= MAX_CHANS_USED)
return SBE_DRVR_FAIL; /* E2BIG */
{
int bh;
bh = atomic_read(&ci->bh_pending);
pr_info(">> bh_pend %d [%d] ihead %d itail %d [%d] th_cnt %d bh_cnt %d wdcnt %d note %d\n",
bh, max_bh, ci->iqp_headx, ci->iqp_tailx, max_intcnt,
ci->intlog.drvr_intr_thcount,
ci->intlog.drvr_intr_bhcount,
ci->wdcount, ci->wd_notify);
max_bh = 0; /* reset counter */
max_intcnt = 0; /* reset counter */
}
if (!(ch = sd_find_chan(dummy, chan))) {
pr_info(">> musycc_dump_ring: channel %d not up.\n", chan);
return ENOENT;
}
pr_info(">> CI %p CHANNEL %3d @ %p: state %x status/p %x/%x\n", ci, chan, ch, ch->state,
ch->status, ch->p.status);
pr_info("--------------------------------\nTX Buffer Ring - Channel %d, txd_num %d. (bd/ch pend %d %d), TXD required %d, txpkt %lu\n",
chan, ch->txd_num,
(u_int32_t) atomic_read(&ci->tx_pending), (u_int32_t) atomic_read(&ch->tx_pending), ch->txd_required, ch->s.tx_packets);
pr_info("++ User 0x%p IRQ_SRV 0x%p USR_ADD 0x%p QStopped %x, start_tx %x tx_full %d txd_free %d mode %x\n",
ch->user, ch->txd_irq_srv, ch->txd_usr_add,
sd_queue_stopped(ch->user),
ch->ch_start_tx, ch->tx_full, ch->txd_free, ch->p.chan_mode);
musycc_dump_txbuffer_ring(ch, 1);
pr_info("RX Buffer Ring - Channel %d, rxd_num %d. IRQ_SRV[%d] 0x%p, start_rx %x rxpkt %lu\n",
chan, ch->rxd_num, ch->rxix_irq_srv,
&ch->mdr[ch->rxix_irq_srv], ch->ch_start_rx, ch->s.rx_packets);
musycc_dump_rxbuffer_ring(ch, 1);
return SBE_DRVR_SUCCESS;
}
status_t
musycc_dump_rings(ci_t *ci, unsigned int start_chan)
{
unsigned int chan;
for (chan = start_chan; chan < (start_chan + 5); chan++)
musycc_dump_ring(ci, chan);
return SBE_DRVR_SUCCESS;
}
/*
* NOTE on musycc_init_mdt(): These MUSYCC writes are only operational after
* a MUSYCC GROUP_INIT command has been issued.
*/
void
musycc_init_mdt(mpi_t *pi)
{
u_int32_t *addr, cfg;
int i;
/*
* This Idle Code insertion takes effect prior to channel's first
* transmitted message. After that, each message contains its own Idle
* Code information which is to be issued after the message is
* transmitted (Ref.MUSYCC 5.2.2.3: MCENBL bit in Group Configuration
* Descriptor).
*/
addr = (u_int32_t *) ((u_long) pi->reg + MUSYCC_MDT_BASE03_ADDR);
cfg = CFG_CH_FLAG_7E << IDLE_CODE;
for (i = 0; i < 32; addr++, i++)
pci_write_32(addr, cfg);
}
/* Set TX thp to the next unprocessed md */
void
musycc_update_tx_thp(mch_t *ch)
{
struct mdesc *md;
unsigned long flags;
spin_lock_irqsave(&ch->ch_txlock, flags);
while (1) {
md = ch->txd_irq_srv;
FLUSH_MEM_READ();
if (!md->data) {
/* No MDs with buffers to process */
spin_unlock_irqrestore(&ch->ch_txlock, flags);
return;
}
if ((le32_to_cpu(md->status)) & MUSYCC_TX_OWNED) {
/* this is the MD to restart TX with */
break;
}
/*
* Otherwise, we have a valid, host-owned message descriptor which
* has been successfully transmitted and whose buffer can be freed,
* so... process this MD, it's owned by the host. (This might give
* as a new, updated txd_irq_srv.)
*/
musycc_bh_tx_eom(ch->up, ch->gchan);
}
md = ch->txd_irq_srv;
ch->up->regram->thp[ch->gchan] = cpu_to_le32(OS_vtophys(md));
FLUSH_MEM_WRITE();
if (ch->tx_full) {
ch->tx_full = 0;
ch->txd_required = 0;
sd_enable_xmit(ch->user); /* re-enable to catch flow controlled
* channel */
}
spin_unlock_irqrestore(&ch->ch_txlock, flags);
#ifdef RLD_TRANS_DEBUG
pr_info("++ musycc_update_tx_thp[%d]: setting thp = %p, sts %x\n", ch->channum, md, md->status);
#endif
}
/*
* This is the workq task executed by the OS when our queue_work() is
* scheduled and run. It can fire off either RX or TX ACTIVATION depending
* upon the channel's ch_start_tx and ch_start_rx variables. This routine
* is implemented as a work queue so that the call to the service request is
* able to sleep, awaiting an interrupt acknowledgment response (SACK) from
* the hardware.
*/
void
musycc_wq_chan_restart(void *arg) /* channel private structure */
{
mch_t *ch;
mpi_t *pi;
struct mdesc *md;
#if 0
unsigned long flags;
#endif
ch = container_of(arg, struct c4_chan_info, ch_work);
pi = ch->up;
#ifdef RLD_TRANS_DEBUG
pr_info("wq_chan_restart[%d]: start_RT[%d/%d] status %x\n",
ch->channum, ch->ch_start_rx, ch->ch_start_tx, ch->status);
#endif
/**********************************/
/** check for RX restart request **/
/**********************************/
if ((ch->ch_start_rx) && (ch->status & RX_ENABLED)) {
ch->ch_start_rx = 0;
#if defined(RLD_TRANS_DEBUG) || defined(RLD_RXACT_DEBUG)
{
static int hereb4 = 7;
if (hereb4) { /* RLD DEBUG */
hereb4--;
#ifdef RLD_TRANS_DEBUG
md = &ch->mdr[ch->rxix_irq_srv];
pr_info("++ musycc_wq_chan_restart[%d] CHAN RX ACTIVATE: rxix_irq_srv %d, md %p sts %x, rxpkt %lu\n",
ch->channum, ch->rxix_irq_srv, md, le32_to_cpu(md->status),
ch->s.rx_packets);
#elif defined(RLD_RXACT_DEBUG)
md = &ch->mdr[ch->rxix_irq_srv];
pr_info("++ musycc_wq_chan_restart[%d] CHAN RX ACTIVATE: rxix_irq_srv %d, md %p sts %x, rxpkt %lu\n",
ch->channum, ch->rxix_irq_srv, md, le32_to_cpu(md->status),
ch->s.rx_packets);
musycc_dump_rxbuffer_ring(ch, 1); /* RLD DEBUG */
#endif
}
}
#endif
musycc_serv_req(pi, SR_CHANNEL_ACTIVATE | SR_RX_DIRECTION | ch->gchan);
}
/**********************************/
/** check for TX restart request **/
/**********************************/
if ((ch->ch_start_tx) && (ch->status & TX_ENABLED)) {
/* find next unprocessed message, then set TX thp to it */
musycc_update_tx_thp(ch);
#if 0
spin_lock_irqsave(&ch->ch_txlock, flags);
#endif
md = ch->txd_irq_srv;
if (!md) {
#ifdef RLD_TRANS_DEBUG
pr_info("-- musycc_wq_chan_restart[%d]: WARNING, starting NULL md\n", ch->channum);
#endif
#if 0
spin_unlock_irqrestore(&ch->ch_txlock, flags);
#endif
} else if (md->data && ((le32_to_cpu(md->status)) & MUSYCC_TX_OWNED)) {
ch->ch_start_tx = 0;
#if 0
spin_unlock_irqrestore(&ch->ch_txlock, flags); /* allow interrupts for service request */
#endif
#ifdef RLD_TRANS_DEBUG
pr_info("++ musycc_wq_chan_restart() CHAN TX ACTIVATE: chan %d txd_irq_srv %p = sts %x, txpkt %lu\n",
ch->channum, ch->txd_irq_srv, ch->txd_irq_srv->status, ch->s.tx_packets);
#endif
musycc_serv_req(pi, SR_CHANNEL_ACTIVATE | SR_TX_DIRECTION | ch->gchan);
}
#ifdef RLD_RESTART_DEBUG
else {
/* retain request to start until retried and we have data to xmit */
pr_info("-- musycc_wq_chan_restart[%d]: DELAYED due to md %p sts %x data %x, start_tx %x\n",
ch->channum, md,
le32_to_cpu(md->status),
le32_to_cpu(md->data), ch->ch_start_tx);
musycc_dump_txbuffer_ring(ch, 0);
#if 0
spin_unlock_irqrestore(&ch->ch_txlock, flags); /* allow interrupts for service request */
#endif
}
#endif
}
}
/*
* Channel restart either fires of a workqueue request (2.6) or lodges a
* watchdog activation sequence (2.4).
*/
void
musycc_chan_restart(mch_t *ch)
{
#ifdef RLD_RESTART_DEBUG
pr_info("++ musycc_chan_restart[%d]: txd_irq_srv @ %p = sts %x\n",
ch->channum, ch->txd_irq_srv, ch->txd_irq_srv->status);
#endif
/* 2.6 - find next unprocessed message, then set TX thp to it */
#ifdef RLD_RESTART_DEBUG
pr_info(">> musycc_chan_restart: scheduling Chan %x workQ @ %p\n", ch->channum, &ch->ch_work);
#endif
c4_wk_chan_restart(ch); /* work queue mechanism fires off: Ref:
* musycc_wq_chan_restart () */
}
void
rld_put_led(mpi_t *pi, u_int32_t ledval)
{
static u_int32_t led = 0;
if (ledval == 0)
led = 0;
else
led |= ledval;
pci_write_32((u_int32_t *) &pi->up->cpldbase->leds, led); /* RLD DEBUG TRANHANG */
}
#define MUSYCC_SR_RETRY_CNT 9
void
musycc_serv_req(mpi_t *pi, u_int32_t req)
{
volatile u_int32_t r;
int rcnt;
/*
* PORT NOTE: Semaphore protect service loop guarantees only a single
* operation at a time. Per MUSYCC Manual - "Issuing service requests to
* the same channel group without first receiving ACK from each request
* may cause the host to lose track of which service request has been
* acknowledged."
*/
SD_SEM_TAKE(&pi->sr_sem_busy, "serv"); /* only 1 thru here, per
* group */
if (pi->sr_last == req) {
#ifdef RLD_TRANS_DEBUG
pr_info(">> same SR, Port %d Req %x\n", pi->portnum, req);
#endif
/*
* The most likely repeated request is the channel activation command
* which follows the occurrence of a Transparent mode TX ONR or a
* BUFF error. If the previous command was a CHANNEL ACTIVATE,
* precede it with a NOOP command in order maintain coherent control
* of this current (re)ACTIVATE.
*/
r = (pi->sr_last & ~SR_GCHANNEL_MASK);
if ((r == (SR_CHANNEL_ACTIVATE | SR_TX_DIRECTION)) ||
(r == (SR_CHANNEL_ACTIVATE | SR_RX_DIRECTION))) {
#ifdef RLD_TRANS_DEBUG
pr_info(">> same CHAN ACT SR, Port %d Req %x => issue SR_NOOP CMD\n", pi->portnum, req);
#endif
SD_SEM_GIVE(&pi->sr_sem_busy); /* allow this next request */
musycc_serv_req(pi, SR_NOOP);
SD_SEM_TAKE(&pi->sr_sem_busy, "serv"); /* relock & continue w/
* original req */
} else if (req == SR_NOOP) {
/* no need to issue back-to-back SR_NOOP commands at this time */
#ifdef RLD_TRANS_DEBUG
pr_info(">> same Port SR_NOOP skipped, Port %d\n", pi->portnum);
#endif
SD_SEM_GIVE(&pi->sr_sem_busy); /* allow this next request */
return;
}
}
rcnt = 0;
pi->sr_last = req;
rewrite:
pci_write_32((u_int32_t *) &pi->reg->srd, req);
FLUSH_MEM_WRITE();
/*
* Per MUSYCC Manual, Section 6.1,2 - "When writing an SCR service
* request, the host must ensure at least one PCI bus clock cycle has
* elapsed before writing another service request. To meet this minimum
* elapsed service request write timing interval, it is recommended that
* the host follow any SCR write with another operation which reads from
* the same address."
*/
r = pci_read_32((u_int32_t *) &pi->reg->srd); /* adhere to write
* timing imposition */
if ((r != req) && (req != SR_CHIP_RESET) && (++rcnt <= MUSYCC_SR_RETRY_CNT)) {
if (cxt1e1_log_level >= LOG_MONITOR)
pr_info("%s: %d - reissue srv req/last %x/%x (hdw reads %x), Chan %d.\n",
pi->up->devname, rcnt, req, pi->sr_last, r,
(pi->portnum * MUSYCC_NCHANS) + (req & 0x1f));
OS_uwait_dummy(); /* this delay helps reduce reissue counts
* (reason not yet researched) */
goto rewrite;
}
if (rcnt > MUSYCC_SR_RETRY_CNT) {
pr_warning("%s: failed service request (#%d)= %x, group %d.\n",
pi->up->devname, MUSYCC_SR_RETRY_CNT, req, pi->portnum);
SD_SEM_GIVE(&pi->sr_sem_busy); /* allow any next request */
return;
}
if (req == SR_CHIP_RESET) {
/*
* PORT NOTE: the CHIP_RESET command is NOT ack'd by the MUSYCC, thus
* the upcoming delay is used. Though the MUSYCC documentation
* suggests a read-after-write would supply the required delay, it's
* unclear what CPU/BUS clock speeds might have been assumed when
* suggesting this 'lack of ACK' workaround. Thus the use of uwait.
*/
OS_uwait(100000, "icard"); /* 100ms */
} else {
FLUSH_MEM_READ();
SD_SEM_TAKE(&pi->sr_sem_wait, "sakack"); /* sleep until SACK
* interrupt occurs */
}
SD_SEM_GIVE(&pi->sr_sem_busy); /* allow any next request */
}
#ifdef SBE_PMCC4_ENABLE
void
musycc_update_timeslots(mpi_t *pi)
{
int i, ch;
char e1mode = IS_FRAME_ANY_E1(pi->p.port_mode);
for (i = 0; i < 32; i++) {
int usedby = 0, last = 0, ts, j, bits[8];
u_int8_t lastval = 0;
if (((i == 0) && e1mode) || /* disable if E1 mode */
((i == 16) && ((pi->p.port_mode == CFG_FRAME_E1CRC_CAS) || (pi->p.port_mode == CFG_FRAME_E1CRC_CAS_AMI)))
|| ((i > 23) && (!e1mode))) /* disable if T1 mode */
pi->tsm[i] = 0xff; /* make tslot unavailable for this mode */
else
pi->tsm[i] = 0x00; /* make tslot available for assignment */
for (j = 0; j < 8; j++)
bits[j] = -1;
for (ch = 0; ch < MUSYCC_NCHANS; ch++) {
if ((pi->chan[ch]->state == UP) && (pi->chan[ch]->p.bitmask[i])) {
usedby++;
last = ch;
lastval = pi->chan[ch]->p.bitmask[i];
for (j = 0; j < 8; j++)
if (lastval & (1 << j))
bits[j] = ch;
pi->tsm[i] |= lastval;
}
}
if (!usedby)
ts = 0;
else if ((usedby == 1) && (lastval == 0xff))
ts = (4 << 5) | last;
else if ((usedby == 1) && (lastval == 0x7f))
ts = (5 << 5) | last;
else {
int idx;
if (bits[0] < 0)
ts = (6 << 5) | (idx = last);
else
ts = (7 << 5) | (idx = bits[0]);
for (j = 1; j < 8; j++) {
pi->regram->rscm[idx * 8 + j] = (bits[j] < 0) ? 0 : (0x80 | bits[j]);
pi->regram->tscm[idx * 8 + j] = (bits[j] < 0) ? 0 : (0x80 | bits[j]);
}
}
pi->regram->rtsm[i] = ts;
pi->regram->ttsm[i] = ts;
}
FLUSH_MEM_WRITE();
musycc_serv_req(pi, SR_TIMESLOT_MAP | SR_RX_DIRECTION);
musycc_serv_req(pi, SR_TIMESLOT_MAP | SR_TX_DIRECTION);
musycc_serv_req(pi, SR_SUBCHANNEL_MAP | SR_RX_DIRECTION);
musycc_serv_req(pi, SR_SUBCHANNEL_MAP | SR_TX_DIRECTION);
}
#endif
#ifdef SBE_WAN256T3_ENABLE
void
musycc_update_timeslots(mpi_t *pi)
{
mch_t *ch;
u_int8_t ts, hmask, tsen;
int gchan;
int i;
#ifdef SBE_PMCC4_ENABLE
hmask = (0x1f << pi->up->p.hypersize) & 0x1f;
#endif
#ifdef SBE_WAN256T3_ENABLE
hmask = (0x1f << hyperdummy) & 0x1f;
#endif
for (i = 0; i < 128; i++) {
gchan = ((pi->portnum * MUSYCC_NCHANS) + (i & hmask)) % MUSYCC_NCHANS;
ch = pi->chan[gchan];
if (ch->p.mode_56k)
tsen = MODE_56KBPS;
else
tsen = MODE_64KBPS; /* also the default */
ts = ((pi->portnum % 4) == (i / 32)) ? (tsen << 5) | (i & hmask) : 0;
pi->regram->rtsm[i] = ts;
pi->regram->ttsm[i] = ts;
}
FLUSH_MEM_WRITE();
musycc_serv_req(pi, SR_TIMESLOT_MAP | SR_RX_DIRECTION);
musycc_serv_req(pi, SR_TIMESLOT_MAP | SR_TX_DIRECTION);
}
#endif
/*
* This routine converts a generic library channel configuration parameter
* into a hardware specific register value (IE. MUSYCC CCD Register).
*/
u_int32_t
musycc_chan_proto(int proto)
{
int reg;
switch (proto) {
case CFG_CH_PROTO_TRANS: /* 0 */
reg = MUSYCC_CCD_TRANS;
break;
case CFG_CH_PROTO_SS7: /* 1 */
reg = MUSYCC_CCD_SS7;
break;
default:
case CFG_CH_PROTO_ISLP_MODE: /* 4 */
case CFG_CH_PROTO_HDLC_FCS16: /* 2 */
reg = MUSYCC_CCD_HDLC_FCS16;
break;
case CFG_CH_PROTO_HDLC_FCS32: /* 3 */
reg = MUSYCC_CCD_HDLC_FCS32;
break;
}
return reg;
}
#ifdef SBE_WAN256T3_ENABLE
static void __init
musycc_init_port(mpi_t *pi)
{
pci_write_32((u_int32_t *) &pi->reg->gbp, OS_vtophys(pi->regram));
pi->regram->grcd =
__constant_cpu_to_le32(MUSYCC_GRCD_RX_ENABLE |
MUSYCC_GRCD_TX_ENABLE |
MUSYCC_GRCD_SF_ALIGN |
MUSYCC_GRCD_SUBCHAN_DISABLE |
MUSYCC_GRCD_OOFMP_DISABLE |
MUSYCC_GRCD_COFAIRQ_DISABLE |
MUSYCC_GRCD_MC_ENABLE |
(MUSYCC_GRCD_POLLTH_32 << MUSYCC_GRCD_POLLTH_SHIFT));
pi->regram->pcd =
__constant_cpu_to_le32(MUSYCC_PCD_E1X4_MODE |
MUSYCC_PCD_TXDATA_RISING |
MUSYCC_PCD_TX_DRIVEN);
/* Message length descriptor */
pi->regram->mld = __constant_cpu_to_le32(cxt1e1_max_mru | (cxt1e1_max_mru << 16));
FLUSH_MEM_WRITE();
musycc_serv_req(pi, SR_GROUP_INIT | SR_RX_DIRECTION);
musycc_serv_req(pi, SR_GROUP_INIT | SR_TX_DIRECTION);
musycc_init_mdt(pi);
musycc_update_timeslots(pi);
}
#endif
status_t __init
musycc_init(ci_t *ci)
{
char *regaddr; /* temp for address boundary calculations */
int i, gchan;
OS_sem_init(&ci->sem_wdbusy, SEM_AVAILABLE); /* watchdog exclusion */
/*
* Per MUSYCC manual, Section 6.3.4 - "The host must allocate a dword
* aligned memory segment for interrupt queue pointers."
*/
#define INT_QUEUE_BOUNDARY 4
regaddr = OS_kmalloc((INT_QUEUE_SIZE + 1) * sizeof(u_int32_t));
if (!regaddr)
return -ENOMEM;
ci->iqd_p_saved = regaddr; /* save orig value for free's usage */
ci->iqd_p = (u_int32_t *) ((unsigned long) (regaddr + INT_QUEUE_BOUNDARY - 1) &
(~(INT_QUEUE_BOUNDARY - 1))); /* this calculates
* closest boundary */
for (i = 0; i < INT_QUEUE_SIZE; i++)
ci->iqd_p[i] = __constant_cpu_to_le32(INT_EMPTY_ENTRY);
for (i = 0; i < ci->max_port; i++) {
mpi_t *pi = &ci->port[i];
/*
* Per MUSYCC manual, Section 6.3.2 - "The host must allocate a 2KB
* bound memory segment for Channel Group 0."
*/
#define GROUP_BOUNDARY 0x800
regaddr = OS_kmalloc(sizeof(struct musycc_groupr) + GROUP_BOUNDARY);
if (!regaddr) {
for (gchan = 0; gchan < i; gchan++) {
pi = &ci->port[gchan];
OS_kfree(pi->reg);
pi->reg = NULL;
}
return -ENOMEM;
}
pi->regram_saved = regaddr; /* save orig value for free's usage */
pi->regram = (struct musycc_groupr *) ((unsigned long) (regaddr + GROUP_BOUNDARY - 1) &
(~(GROUP_BOUNDARY - 1))); /* this calculates
* closest boundary */
}
/* any board centric MUSYCC commands will use group ZERO as its "home" */
ci->regram = ci->port[0].regram;
musycc_serv_req(&ci->port[0], SR_CHIP_RESET);
pci_write_32((u_int32_t *) &ci->reg->gbp, OS_vtophys(ci->regram));
pci_flush_write(ci);
#ifdef CONFIG_SBE_PMCC4_NCOMM
ci->regram->__glcd = __constant_cpu_to_le32(GCD_MAGIC);
#else
/* standard driver POLLS for INTB via CPLD register */
ci->regram->__glcd = __constant_cpu_to_le32(GCD_MAGIC | MUSYCC_GCD_INTB_DISABLE);
#endif
ci->regram->__iqp = cpu_to_le32(OS_vtophys(&ci->iqd_p[0]));
ci->regram->__iql = __constant_cpu_to_le32(INT_QUEUE_SIZE - 1);
pci_write_32((u_int32_t *) &ci->reg->dacbp, 0);
FLUSH_MEM_WRITE();
ci->state = C_RUNNING; /* mark as full interrupt processing
* available */
musycc_serv_req(&ci->port[0], SR_GLOBAL_INIT); /* FIRST INTERRUPT ! */
/* sanity check settable parameters */
if (cxt1e1_max_mru > 0xffe) {
pr_warning("Maximum allowed MRU exceeded, resetting %d to %d.\n",
cxt1e1_max_mru, 0xffe);
cxt1e1_max_mru = 0xffe;
}
if (cxt1e1_max_mtu > 0xffe) {
pr_warning("Maximum allowed MTU exceeded, resetting %d to %d.\n",
cxt1e1_max_mtu, 0xffe);
cxt1e1_max_mtu = 0xffe;
}
#ifdef SBE_WAN256T3_ENABLE
for (i = 0; i < MUSYCC_NPORTS; i++)
musycc_init_port(&ci->port[i]);
#endif
return SBE_DRVR_SUCCESS; /* no error */
}
void
musycc_bh_tx_eom(mpi_t *pi, int gchan)
{
mch_t *ch;
struct mdesc *md;
#if 0
#ifndef SBE_ISR_INLINE
unsigned long flags;
#endif
#endif
volatile u_int32_t status;
ch = pi->chan[gchan];
if (!ch || ch->state != UP) {
if (cxt1e1_log_level >= LOG_ERROR)
pr_info("%s: intr: xmit EOM on uninitialized channel %d\n",
pi->up->devname, gchan);
}
if (!ch || !ch->mdt)
return; /* note: mdt==0 implies a malloc()
* failure w/in chan_up() routine */
#if 0
#ifdef SBE_ISR_INLINE
spin_lock_irq(&ch->ch_txlock);
#else
spin_lock_irqsave(&ch->ch_txlock, flags);
#endif
#endif
do {
FLUSH_MEM_READ();
md = ch->txd_irq_srv;
status = le32_to_cpu(md->status);
/*
* Note: Per MUSYCC Ref 6.4.9, the host does not poll a host-owned
* Transmit Buffer Descriptor during Transparent Mode.
*/
if (status & MUSYCC_TX_OWNED) {
int readCount, loopCount;
/***********************************************************/
/* HW Bug Fix */
/* ---------- */
/* Under certain PCI Bus loading conditions, the data */
/* associated with an update of Shared Memory is delayed */
/* relative to its PCI Interrupt. This is caught when */
/* the host determines it does not yet OWN the descriptor. */
/***********************************************************/
readCount = 0;
while (status & MUSYCC_TX_OWNED) {
for (loopCount = 0; loopCount < 0x30; loopCount++)
OS_uwait_dummy(); /* use call to avoid optimization
* removal of dummy delay */
FLUSH_MEM_READ();
status = le32_to_cpu(md->status);
if (readCount++ > 40)
break; /* don't wait any longer */
}
if (status & MUSYCC_TX_OWNED) {
if (cxt1e1_log_level >= LOG_MONITOR) {
pr_info("%s: Port %d Chan %2d - unexpected TX msg ownership intr (md %p sts %x)\n",
pi->up->devname, pi->portnum, ch->channum,
md, status);
pr_info("++ User 0x%p IRQ_SRV 0x%p USR_ADD 0x%p QStopped %x, start_tx %x tx_full %d txd_free %d mode %x\n",
ch->user, ch->txd_irq_srv, ch->txd_usr_add,
sd_queue_stopped(ch->user),
ch->ch_start_tx, ch->tx_full, ch->txd_free, ch->p.chan_mode);
musycc_dump_txbuffer_ring(ch, 0);
}
break; /* Not our mdesc, done */
} else {
if (cxt1e1_log_level >= LOG_MONITOR)
pr_info("%s: Port %d Chan %2d - recovered TX msg ownership [%d] (md %p sts %x)\n",
pi->up->devname, pi->portnum, ch->channum, readCount, md, status);
}
}
ch->txd_irq_srv = md->snext;
md->data = 0;
if (md->mem_token) {
/* upcount channel */
atomic_sub(OS_mem_token_tlen(md->mem_token), &ch->tx_pending);
/* upcount card */
atomic_sub(OS_mem_token_tlen(md->mem_token), &pi->up->tx_pending);
#ifdef SBE_WAN256T3_ENABLE
if (!atomic_read(&pi->up->tx_pending))
wan256t3_led(pi->up, LED_TX, 0);
#endif
#ifdef CONFIG_SBE_WAN256T3_NCOMM
/* callback that our packet was sent */
{
int hdlcnum = (pi->portnum * 32 + gchan);
if (hdlcnum >= 228) {
if (nciProcess_TX_complete)
(*nciProcess_TX_complete) (hdlcnum,
getuserbychan(gchan));
}
}
#endif /*** CONFIG_SBE_WAN256T3_NCOMM ***/
OS_mem_token_free_irq(md->mem_token);
md->mem_token = NULL;
}
md->status = 0;
#ifdef RLD_TXFULL_DEBUG
if (cxt1e1_log_level >= LOG_MONITOR2)
pr_info("~~ tx_eom: tx_full %x txd_free %d -> %d\n",
ch->tx_full, ch->txd_free, ch->txd_free + 1);
#endif
++ch->txd_free;
FLUSH_MEM_WRITE();
if ((ch->p.chan_mode != CFG_CH_PROTO_TRANS) && (status & EOBIRQ_ENABLE)) {
if (cxt1e1_log_level >= LOG_MONITOR)
pr_info("%s: Mode (%x) incorrect EOB status (%x)\n",
pi->up->devname, ch->p.chan_mode, status);
if ((status & EOMIRQ_ENABLE) == 0)
break;
}
} while ((ch->p.chan_mode != CFG_CH_PROTO_TRANS) && ((status & EOMIRQ_ENABLE) == 0));
/*
* NOTE: (The above 'while' is coupled w/ previous 'do', way above.) Each
* Transparent data buffer has the EOB bit, and NOT the EOM bit, set and
* will furthermore have a separate IQD associated with each messages
* buffer.
*/
FLUSH_MEM_READ();
/*
* Smooth flow control hysterisis by maintaining task stoppage until half
* the available write buffers are available.
*/
if (ch->tx_full && (ch->txd_free >= (ch->txd_num / 2))) {
/*
* Then, only releave task stoppage if we actually have enough
* buffers to service the last requested packet. It may require MORE
* than half the available!
*/
if (ch->txd_free >= ch->txd_required) {
#ifdef RLD_TXFULL_DEBUG
if (cxt1e1_log_level >= LOG_MONITOR2)
pr_info("tx_eom[%d]: enable xmit tx_full no more, txd_free %d txd_num/2 %d\n",
ch->channum,
ch->txd_free, ch->txd_num / 2);
#endif
ch->tx_full = 0;
ch->txd_required = 0;
sd_enable_xmit(ch->user); /* re-enable to catch flow controlled
* channel */
}
}
#ifdef RLD_TXFULL_DEBUG
else if (ch->tx_full) {
if (cxt1e1_log_level >= LOG_MONITOR2)
pr_info("tx_eom[%d]: bypass TX enable though room available? (txd_free %d txd_num/2 %d)\n",
ch->channum,
ch->txd_free, ch->txd_num / 2);
}
#endif
FLUSH_MEM_WRITE();
#if 0
#ifdef SBE_ISR_INLINE
spin_unlock_irq(&ch->ch_txlock);
#else
spin_unlock_irqrestore(&ch->ch_txlock, flags);
#endif
#endif
}
static void
musycc_bh_rx_eom(mpi_t *pi, int gchan)
{
mch_t *ch;
void *m, *m2;
struct mdesc *md;
volatile u_int32_t status;
u_int32_t error;
ch = pi->chan[gchan];
if (!ch || ch->state != UP) {
if (cxt1e1_log_level > LOG_ERROR)
pr_info("%s: intr: receive EOM on uninitialized channel %d\n",
pi->up->devname, gchan);
return;
}
if (!ch->mdr)
return; /* can this happen ? */
for (;;) {
FLUSH_MEM_READ();
md = &ch->mdr[ch->rxix_irq_srv];
status = le32_to_cpu(md->status);
if (!(status & HOST_RX_OWNED))
break; /* Not our mdesc, done */
m = md->mem_token;
error = (status >> 16) & 0xf;
if (error == 0) {
#ifdef CONFIG_SBE_WAN256T3_NCOMM
int hdlcnum = (pi->portnum * 32 + gchan);
/*
* if the packet number belongs to NCOMM, then send it to the TMS
* driver
*/
if (hdlcnum >= 228) {
if (nciProcess_RX_packet)
(*nciProcess_RX_packet) (hdlcnum, status & 0x3fff, m, ch->user);
} else
#endif /*** CONFIG_SBE_WAN256T3_NCOMM ***/
{
if ((m2 = OS_mem_token_alloc(cxt1e1_max_mru))) {
/* substitute the mbuf+cluster */
md->mem_token = m2;
md->data = cpu_to_le32(OS_vtophys(OS_mem_token_data(m2)));
/* pass the received mbuf upward */
sd_recv_consume(m, status & LENGTH_MASK, ch->user);
ch->s.rx_packets++;
ch->s.rx_bytes += status & LENGTH_MASK;
} else
ch->s.rx_dropped++;
}
} else if (error == ERR_FCS)
ch->s.rx_crc_errors++;
else if (error == ERR_ALIGN)
ch->s.rx_missed_errors++;
else if (error == ERR_ABT)
ch->s.rx_missed_errors++;
else if (error == ERR_LNG)
ch->s.rx_length_errors++;
else if (error == ERR_SHT)
ch->s.rx_length_errors++;
FLUSH_MEM_WRITE();
status = cxt1e1_max_mru;
if (ch->p.chan_mode == CFG_CH_PROTO_TRANS)
status |= EOBIRQ_ENABLE;
md->status = cpu_to_le32(status);
/* Check next mdesc in the ring */
if (++ch->rxix_irq_srv >= ch->rxd_num)
ch->rxix_irq_srv = 0;
FLUSH_MEM_WRITE();
}
}
irqreturn_t
musycc_intr_th_handler(void *devp)
{
ci_t *ci = (ci_t *) devp;
volatile u_int32_t status, currInt = 0;
u_int32_t nextInt, intCnt;
/*
* Hardware not available, potential interrupt hang. But since interrupt
* might be shared, just return.
*/
if (ci->state == C_INIT)
return IRQ_NONE;
/*
* Marked as hardware available. Don't service interrupts, just clear the
* event.
*/
if (ci->state == C_IDLE) {
status = pci_read_32((u_int32_t *) &ci->reg->isd);
/* clear the interrupt but process nothing else */
pci_write_32((u_int32_t *) &ci->reg->isd, status);
return IRQ_HANDLED;
}
FLUSH_PCI_READ();
FLUSH_MEM_READ();
status = pci_read_32((u_int32_t *) &ci->reg->isd);
nextInt = INTRPTS_NEXTINT(status);
intCnt = INTRPTS_INTCNT(status);
ci->intlog.drvr_intr_thcount++;
/*********************************************************/
/* HW Bug Fix */
/* ---------- */
/* Under certain PCI Bus loading conditions, the */
/* MUSYCC looses the data associated with an update */
/* of its ISD and erroneously returns the immediately */
/* preceding 'nextInt' value. However, the 'intCnt' */
/* value appears to be correct. By not starting service */
/* where the 'missing' 'nextInt' SHOULD point causes */
/* the IQD not to be serviced - the 'not serviced' */
/* entries then remain and continue to increase as more */
/* incorrect ISD's are encountered. */
/*********************************************************/
if (nextInt != INTRPTS_NEXTINT(ci->intlog.this_status_new)) {
if (cxt1e1_log_level >= LOG_MONITOR) {
pr_info("%s: note - updated ISD from %08x to %08x\n",
ci->devname, status,
(status & (~INTRPTS_NEXTINT_M)) | ci->intlog.this_status_new);
}
/*
* Replace bogus status with software corrected value.
*
* It's not known whether, during this problem occurrence, if the
* INTFULL bit is correctly reported or not.
*/
status = (status & (~INTRPTS_NEXTINT_M)) | (ci->intlog.this_status_new);
nextInt = INTRPTS_NEXTINT(status);
}
/**********************************************/
/* Cn847x Bug Fix */
/* -------------- */
/* Fix for inability to write back same index */
/* as read for a full interrupt queue. */
/**********************************************/
if (intCnt == INT_QUEUE_SIZE)
currInt = ((intCnt - 1) + nextInt) & (INT_QUEUE_SIZE - 1);
else
/************************************************/
/* Interrupt Write Location Issues */
/* ------------------------------- */
/* When the interrupt status descriptor is */
/* written, the interrupt line is de-asserted */
/* by the Cn847x. In the case of MIPS */
/* microprocessors, this must occur at the */
/* beginning of the interrupt handler so that */
/* the interrupt handle is not re-entered due */
/* to interrupt dis-assertion latency. */
/* In the case of all other processors, this */
/* action should occur at the end of the */
/* interrupt handler to avoid overwriting the */
/* interrupt queue. */
/************************************************/
if (intCnt)
currInt = (intCnt + nextInt) & (INT_QUEUE_SIZE - 1);
else {
/*
* NOTE: Servicing an interrupt whose ISD contains a count of ZERO
* can be indicative of a Shared Interrupt chain. Our driver can be
* called from the system's interrupt handler as a matter of the OS
* walking the chain. As the chain is walked, the interrupt will
* eventually be serviced by the correct driver/handler.
*/
#if 0
/* chained interrupt = not ours */
pr_info(">> %s: intCnt NULL, sts %x, possibly a chained interrupt!\n",
ci->devname, status);
#endif
return IRQ_NONE;
}
ci->iqp_tailx = currInt;
currInt <<= INTRPTS_NEXTINT_S;
ci->intlog.last_status_new = ci->intlog.this_status_new;
ci->intlog.this_status_new = currInt;
if ((cxt1e1_log_level >= LOG_WARN) && (status & INTRPTS_INTFULL_M))
pr_info("%s: Interrupt queue full condition occurred\n", ci->devname);
if (cxt1e1_log_level >= LOG_DEBUG)
pr_info("%s: interrupts pending, isd @ 0x%p: %x curr %d cnt %d NEXT %d\n",
ci->devname, &ci->reg->isd,
status, nextInt, intCnt, (intCnt + nextInt) & (INT_QUEUE_SIZE - 1));
FLUSH_MEM_WRITE();
#if defined(SBE_ISR_TASKLET)
pci_write_32((u_int32_t *) &ci->reg->isd, currInt);
atomic_inc(&ci->bh_pending);
tasklet_schedule(&ci->ci_musycc_isr_tasklet);
#elif defined(SBE_ISR_IMMEDIATE)
pci_write_32((u_int32_t *) &ci->reg->isd, currInt);
atomic_inc(&ci->bh_pending);
queue_task(&ci->ci_musycc_isr_tq, &tq_immediate);
mark_bh(IMMEDIATE_BH);
#elif defined(SBE_ISR_INLINE)
(void) musycc_intr_bh_tasklet(ci);
pci_write_32((u_int32_t *) &ci->reg->isd, currInt);
#endif
return IRQ_HANDLED;
}
#if defined(SBE_ISR_IMMEDIATE)
unsigned long
#else
void
#endif
musycc_intr_bh_tasklet(ci_t *ci)
{
mpi_t *pi;
mch_t *ch;
unsigned int intCnt;
volatile u_int32_t currInt = 0;
volatile unsigned int headx, tailx;
int readCount, loopCount;
int group, gchan, event, err, tx;
u_int32_t badInt = INT_EMPTY_ENTRY;
u_int32_t badInt2 = INT_EMPTY_ENTRY2;
/*
* Hardware not available, potential interrupt hang. But since interrupt
* might be shared, just return.
*/
if ((drvr_state != SBE_DRVR_AVAILABLE) || (ci->state == C_INIT)) {
#if defined(SBE_ISR_IMMEDIATE)
return 0L;
#else
return;
#endif
}
#if defined(SBE_ISR_TASKLET) || defined(SBE_ISR_IMMEDIATE)
if (drvr_state != SBE_DRVR_AVAILABLE) {
#if defined(SBE_ISR_TASKLET)
return;
#elif defined(SBE_ISR_IMMEDIATE)
return 0L;
#endif
}
#elif defined(SBE_ISR_INLINE)
/* no semaphore taken, no double checks */
#endif
ci->intlog.drvr_intr_bhcount++;
FLUSH_MEM_READ();
{
unsigned int bh = atomic_read(&ci->bh_pending);
max_bh = max(bh, max_bh);
}
atomic_set(&ci->bh_pending, 0);/* if here, no longer pending */
while ((headx = ci->iqp_headx) != (tailx = ci->iqp_tailx)) {
intCnt = (tailx >= headx) ? (tailx - headx) : (tailx - headx + INT_QUEUE_SIZE);
currInt = le32_to_cpu(ci->iqd_p[headx]);
max_intcnt = max(intCnt, max_intcnt); /* RLD DEBUG */
/**************************************************/
/* HW Bug Fix */
/* ---------- */
/* The following code checks for the condition */
/* of interrupt assertion before interrupt */
/* queue update. This is a problem on several */
/* PCI-Local bridge chips found on some products. */
/**************************************************/
readCount = 0;
if ((currInt == badInt) || (currInt == badInt2))
ci->intlog.drvr_int_failure++;
while ((currInt == badInt) || (currInt == badInt2)) {
for (loopCount = 0; loopCount < 0x30; loopCount++)
OS_uwait_dummy(); /* use call to avoid optimization removal
* of dummy delay */
FLUSH_MEM_READ();
currInt = le32_to_cpu(ci->iqd_p[headx]);
if (readCount++ > 20)
break;
}
if ((currInt == badInt) || (currInt == badInt2)) { /* catch failure of Bug
* Fix checking */
if (cxt1e1_log_level >= LOG_WARN)
pr_info("%s: Illegal Interrupt Detected @ 0x%p, mod %d.)\n",
ci->devname, &ci->iqd_p[headx], headx);
/*
* If the descriptor has not recovered, then leaving the EMPTY
* entry set will not signal to the MUSYCC that this descriptor
* has been serviced. The Interrupt Queue can then start losing
* available descriptors and MUSYCC eventually encounters and
* reports the INTFULL condition. Per manual, changing any bit
* marks descriptor as available, thus the use of different
* EMPTY_ENTRY values.
*/
if (currInt == badInt)
ci->iqd_p[headx] = __constant_cpu_to_le32(INT_EMPTY_ENTRY2);
else
ci->iqd_p[headx] = __constant_cpu_to_le32(INT_EMPTY_ENTRY);
ci->iqp_headx = (headx + 1) & (INT_QUEUE_SIZE - 1); /* insure wrapness */
FLUSH_MEM_WRITE();
FLUSH_MEM_READ();
continue;
}
group = INTRPT_GRP(currInt);
gchan = INTRPT_CH(currInt);
event = INTRPT_EVENT(currInt);
err = INTRPT_ERROR(currInt);
tx = currInt & INTRPT_DIR_M;
ci->iqd_p[headx] = __constant_cpu_to_le32(INT_EMPTY_ENTRY);
FLUSH_MEM_WRITE();
if (cxt1e1_log_level >= LOG_DEBUG) {
if (err != 0)
pr_info(" %08x -> err: %2d,", currInt, err);
pr_info("+ interrupt event: %d, grp: %d, chan: %2d, side: %cX\n",
event, group, gchan, tx ? 'T' : 'R');
}
pi = &ci->port[group]; /* notice that here we assume 1-1 group -
* port mapping */
ch = pi->chan[gchan];
switch (event) {
case EVE_SACK: /* Service Request Acknowledge */
if (cxt1e1_log_level >= LOG_DEBUG) {
volatile u_int32_t r;
r = pci_read_32((u_int32_t *) &pi->reg->srd);
pr_info("- SACK cmd: %08x (hdw= %08x)\n", pi->sr_last, r);
}
SD_SEM_GIVE(&pi->sr_sem_wait); /* wake up waiting process */
break;
case EVE_CHABT: /* Change To Abort Code (0x7e -> 0xff) */
case EVE_CHIC: /* Change To Idle Code (0xff -> 0x7e) */
break;
case EVE_EOM: /* End Of Message */
case EVE_EOB: /* End Of Buffer (Transparent mode) */
if (tx)
musycc_bh_tx_eom(pi, gchan);
else
musycc_bh_rx_eom(pi, gchan);
#if 0
break;
#else
/*
* MUSYCC Interrupt Descriptor section states that EOB and EOM
* can be combined with the NONE error (as well as others). So
* drop thru to catch this...
*/
#endif
case EVE_NONE:
if (err == ERR_SHT)
ch->s.rx_length_errors++;
break;
default:
if (cxt1e1_log_level >= LOG_WARN)
pr_info("%s: unexpected interrupt event: %d, iqd[%d]: %08x, port: %d\n", ci->devname,
event, headx, currInt, group);
break;
} /* switch on event */
/*
* Per MUSYCC Manual, Section 6.4.8.3 [Transmit Errors], TX errors
* are service-affecting and require action to resume normal
* bit-level processing.
*/
switch (err) {
case ERR_ONR:
/*
* Per MUSYCC manual, Section 6.4.8.3 [Transmit Errors], this
* error requires Transmit channel reactivation.
*
* Per MUSYCC manual, Section 6.4.8.4 [Receive Errors], this error
* requires Receive channel reactivation.
*/
if (tx) {
/*
* TX ONR Error only occurs when channel is configured for
* Transparent Mode. However, this code will catch and
* re-activate on ANY TX ONR error.
*/
/*
* Set flag to re-enable on any next transmit attempt.
*/
ch->ch_start_tx = CH_START_TX_ONR;
{
#ifdef RLD_TRANS_DEBUG
if (1 || cxt1e1_log_level >= LOG_MONITOR)
#else
if (cxt1e1_log_level >= LOG_MONITOR)
#endif
{
pr_info("%s: TX buffer underflow [ONR] on channel %d, mode %x QStopped %x free %d\n",
ci->devname, ch->channum, ch->p.chan_mode, sd_queue_stopped(ch->user), ch->txd_free);
#ifdef RLD_DEBUG
if (ch->p.chan_mode == 2) { /* problem = ONR on HDLC
* mode */
pr_info("++ Failed Last %x Next %x QStopped %x, start_tx %x tx_full %d txd_free %d mode %x\n",
(u_int32_t) ch->txd_irq_srv, (u_int32_t) ch->txd_usr_add,
sd_queue_stopped(ch->user),
ch->ch_start_tx, ch->tx_full, ch->txd_free, ch->p.chan_mode);
musycc_dump_txbuffer_ring(ch, 0);
}
#endif
}
}
} else { /* RX buffer overrun */
/*
* Per MUSYCC manual, Section 6.4.8.4 [Receive Errors],
* channel recovery for this RX ONR error IS required. It is
* also suggested to increase the number of receive buffers
* for this channel. Receive channel reactivation IS
* required, and data has been lost.
*/
ch->s.rx_over_errors++;
ch->ch_start_rx = CH_START_RX_ONR;
if (cxt1e1_log_level >= LOG_WARN) {
pr_info("%s: RX buffer overflow [ONR] on channel %d, mode %x\n",
ci->devname, ch->channum, ch->p.chan_mode);
//musycc_dump_rxbuffer_ring (ch, 0); /* RLD DEBUG */
}
}
musycc_chan_restart(ch);
break;
case ERR_BUF:
if (tx) {
ch->s.tx_fifo_errors++;
ch->ch_start_tx = CH_START_TX_BUF;
/*
* Per MUSYCC manual, Section 6.4.8.3 [Transmit Errors],
* this BUFF error requires Transmit channel reactivation.
*/
if (cxt1e1_log_level >= LOG_MONITOR)
pr_info("%s: TX buffer underrun [BUFF] on channel %d, mode %x\n",
ci->devname, ch->channum, ch->p.chan_mode);
} else { /* RX buffer overrun */
ch->s.rx_over_errors++;
/*
* Per MUSYCC manual, Section 6.4.8.4 [Receive Errors], HDLC
* mode requires NO recovery for this RX BUFF error is
* required. It is suggested to increase the FIFO buffer
* space for this channel. Receive channel reactivation is
* not required, but data has been lost.
*/
if (cxt1e1_log_level >= LOG_WARN)
pr_info("%s: RX buffer overrun [BUFF] on channel %d, mode %x\n",
ci->devname, ch->channum, ch->p.chan_mode);
/*
* Per MUSYCC manual, Section 6.4.9.4 [Receive Errors],
* Transparent mode DOES require recovery for the RX BUFF
* error. It is suggested to increase the FIFO buffer space
* for this channel. Receive channel reactivation IS
* required and data has been lost.
*/
if (ch->p.chan_mode == CFG_CH_PROTO_TRANS)
ch->ch_start_rx = CH_START_RX_BUF;
}
if (tx || (ch->p.chan_mode == CFG_CH_PROTO_TRANS))
musycc_chan_restart(ch);
break;
default:
break;
} /* switch on err */
/* Check for interrupt lost condition */
if ((currInt & INTRPT_ILOST_M) && (cxt1e1_log_level >= LOG_ERROR))
pr_info("%s: Interrupt queue overflow - ILOST asserted\n",
ci->devname);
ci->iqp_headx = (headx + 1) & (INT_QUEUE_SIZE - 1); /* insure wrapness */
FLUSH_MEM_WRITE();
FLUSH_MEM_READ();
} /* while */
if ((cxt1e1_log_level >= LOG_MONITOR2) && (ci->iqp_headx != ci->iqp_tailx)) {
int bh;
bh = atomic_read(&CI->bh_pending);
pr_info("_bh_: late arrivals, head %d != tail %d, pending %d\n",
ci->iqp_headx, ci->iqp_tailx, bh);
}
#if defined(SBE_ISR_IMMEDIATE)
return 0L;
#endif
/* else, nothing returned */
}
#if 0
int __init
musycc_new_chan(ci_t *ci, int channum, void *user)
{
mch_t *ch;
ch = ci->port[channum / MUSYCC_NCHANS].chan[channum % MUSYCC_NCHANS];
if (ch->state != UNASSIGNED)
return EEXIST;
/* NOTE: mch_t already cleared during OS_kmalloc() */
ch->state = DOWN;
ch->user = user;
#if 0
ch->status = 0;
ch->p.status = 0;
ch->p.intr_mask = 0;
#endif
ch->p.chan_mode = CFG_CH_PROTO_HDLC_FCS16;
ch->p.idlecode = CFG_CH_FLAG_7E;
ch->p.pad_fill_count = 2;
spin_lock_init(&ch->ch_rxlock);
spin_lock_init(&ch->ch_txlock);
return 0;
}
#endif
#ifdef SBE_PMCC4_ENABLE
status_t
musycc_chan_down(ci_t *dummy, int channum)
{
mpi_t *pi;
mch_t *ch;
int i, gchan;
if (!(ch = sd_find_chan(dummy, channum)))
return EINVAL;
pi = ch->up;
gchan = ch->gchan;
/* Deactivate the channel */
musycc_serv_req(pi, SR_CHANNEL_DEACTIVATE | SR_RX_DIRECTION | gchan);
ch->ch_start_rx = 0;
musycc_serv_req(pi, SR_CHANNEL_DEACTIVATE | SR_TX_DIRECTION | gchan);
ch->ch_start_tx = 0;
if (ch->state == DOWN)
return 0;
ch->state = DOWN;
pi->regram->thp[gchan] = 0;
pi->regram->tmp[gchan] = 0;
pi->regram->rhp[gchan] = 0;
pi->regram->rmp[gchan] = 0;
FLUSH_MEM_WRITE();
for (i = 0; i < ch->txd_num; i++)
if (ch->mdt[i].mem_token)
OS_mem_token_free(ch->mdt[i].mem_token);
for (i = 0; i < ch->rxd_num; i++)
if (ch->mdr[i].mem_token)
OS_mem_token_free(ch->mdr[i].mem_token);
OS_kfree(ch->mdr);
ch->mdr = NULL;
ch->rxd_num = 0;
OS_kfree(ch->mdt);
ch->mdt = NULL;
ch->txd_num = 0;
musycc_update_timeslots(pi);
c4_fifo_free(pi, ch->gchan);
pi->openchans--;
return 0;
}
#endif
int
musycc_del_chan(ci_t *ci, int channum)
{
mch_t *ch;
if ((channum < 0) || (channum >= (MUSYCC_NPORTS * MUSYCC_NCHANS))) /* sanity chk param */
return ECHRNG;
if (!(ch = sd_find_chan(ci, channum)))
return ENOENT;
if (ch->state == UP)
musycc_chan_down(ci, channum);
ch->state = UNASSIGNED;
return 0;
}
int
musycc_del_chan_stats(ci_t *ci, int channum)
{
mch_t *ch;
if (channum < 0 || channum >= (MUSYCC_NPORTS * MUSYCC_NCHANS)) /* sanity chk param */
return ECHRNG;
if (!(ch = sd_find_chan(ci, channum)))
return ENOENT;
memset(&ch->s, 0, sizeof(struct sbecom_chan_stats));
return 0;
}
int
musycc_start_xmit(ci_t *ci, int channum, void *mem_token)
{
mch_t *ch;
struct mdesc *md;
void *m2;
#if 0
unsigned long flags;
#endif
int txd_need_cnt;
u_int32_t len;
if (!(ch = sd_find_chan(ci, channum)))
return -ENOENT;
if (ci->state != C_RUNNING) /* full interrupt processing available */
return -EINVAL;
if (ch->state != UP)
return -EINVAL;
if (!(ch->status & TX_ENABLED))
return -EROFS; /* how else to flag unwritable state ? */
#ifdef RLD_TRANS_DEBUGx
if (1 || cxt1e1_log_level >= LOG_MONITOR2)
#else
if (cxt1e1_log_level >= LOG_MONITOR2)
#endif
{
pr_info("++ start_xmt[%d]: state %x start %x full %d free %d required %d stopped %x\n",
channum, ch->state, ch->ch_start_tx, ch->tx_full,
ch->txd_free, ch->txd_required, sd_queue_stopped(ch->user));
}
/***********************************************/
/** Determine total amount of data to be sent **/
/***********************************************/
m2 = mem_token;
txd_need_cnt = 0;
for (len = OS_mem_token_tlen(m2); len > 0;
m2 = (void *) OS_mem_token_next(m2)) {
if (!OS_mem_token_len(m2))
continue;
txd_need_cnt++;
len -= OS_mem_token_len(m2);
}
if (txd_need_cnt == 0) {
if (cxt1e1_log_level >= LOG_MONITOR2)
pr_info("%s channel %d: no TX data in User buffer\n", ci->devname, channum);
OS_mem_token_free(mem_token);
return 0; /* no data to send */
}
/*************************************************/
/** Are there sufficient descriptors available? **/
/*************************************************/
if (txd_need_cnt > ch->txd_num) { /* never enough descriptors for this
* large a buffer */
if (cxt1e1_log_level >= LOG_DEBUG)
pr_info("start_xmit: discarding buffer, insufficient descriptor cnt %d, need %d.\n",
ch->txd_num, txd_need_cnt + 1);
ch->s.tx_dropped++;
OS_mem_token_free(mem_token);
return 0;
}
#if 0
spin_lock_irqsave(&ch->ch_txlock, flags);
#endif
/************************************************************/
/** flow control the line if not enough descriptors remain **/
/************************************************************/
if (txd_need_cnt > ch->txd_free) {
if (cxt1e1_log_level >= LOG_MONITOR2)
pr_info("start_xmit[%d]: EBUSY - need more descriptors, have %d of %d need %d\n",
channum, ch->txd_free, ch->txd_num, txd_need_cnt);
ch->tx_full = 1;
ch->txd_required = txd_need_cnt;
sd_disable_xmit(ch->user);
#if 0
spin_unlock_irqrestore(&ch->ch_txlock, flags);
#endif
return -EBUSY; /* tell user to try again later */
}
/**************************************************/
/** Put the user data into MUSYCC data buffer(s) **/
/**************************************************/
m2 = mem_token;
md = ch->txd_usr_add; /* get current available descriptor */
for (len = OS_mem_token_tlen(m2); len > 0; m2 = OS_mem_token_next(m2)) {
int u = OS_mem_token_len(m2);
if (!u)
continue;
len -= u;
/*
* Enable following chunks, yet wait to enable the FIRST chunk until
* after ALL subsequent chunks are setup.
*/
if (md != ch->txd_usr_add) /* not first chunk */
u |= MUSYCC_TX_OWNED; /* transfer ownership from HOST to MUSYCC */
if (len) /* not last chunk */
u |= EOBIRQ_ENABLE;
else if (ch->p.chan_mode == CFG_CH_PROTO_TRANS) {
/*
* Per MUSYCC Ref 6.4.9 for Transparent Mode, the host must
* always clear EOMIRQ_ENABLE in every Transmit Buffer Descriptor
* (IE. don't set herein).
*/
u |= EOBIRQ_ENABLE;
} else
u |= EOMIRQ_ENABLE; /* EOM, last HDLC chunk */
/* last chunk in hdlc mode */
u |= (ch->p.idlecode << IDLE_CODE);
if (ch->p.pad_fill_count) {
#if 0
/* NOOP NOTE: u_int8_t cannot be > 0xFF */
/* sanitize pad_fill_count for maximums allowed by hardware */
if (ch->p.pad_fill_count > EXTRA_FLAGS_MASK)
ch->p.pad_fill_count = EXTRA_FLAGS_MASK;
#endif
u |= (PADFILL_ENABLE | (ch->p.pad_fill_count << EXTRA_FLAGS));
}
md->mem_token = len ? NULL : mem_token; /* Fill in mds on last
* segment, others set ZERO
* so that entire token is
* removed ONLY when ALL
* segments have been
* transmitted. */
md->data = cpu_to_le32(OS_vtophys(OS_mem_token_data(m2)));
FLUSH_MEM_WRITE();
md->status = cpu_to_le32(u);
--ch->txd_free;
md = md->snext;
}
FLUSH_MEM_WRITE();
/*
* Now transfer ownership of first chunk from HOST to MUSYCC in order to
* fire-off this XMIT.
*/
ch->txd_usr_add->status |= __constant_cpu_to_le32(MUSYCC_TX_OWNED);
FLUSH_MEM_WRITE();
ch->txd_usr_add = md;
len = OS_mem_token_tlen(mem_token);
atomic_add(len, &ch->tx_pending);
atomic_add(len, &ci->tx_pending);
ch->s.tx_packets++;
ch->s.tx_bytes += len;
/*
* If an ONR was seen, then channel requires poking to restart
* transmission.
*/
if (ch->ch_start_tx)
musycc_chan_restart(ch);
#ifdef SBE_WAN256T3_ENABLE
wan256t3_led(ci, LED_TX, LEDV_G);
#endif
return 0;
}
/*** End-of-File ***/