| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * adv7175 - adv7175a video encoder driver version 0.0.3 |
| * |
| * Copyright (C) 1998 Dave Perks <dperks@ibm.net> |
| * Copyright (C) 1999 Wolfgang Scherr <scherr@net4you.net> |
| * Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx> |
| * - some corrections for Pinnacle Systems Inc. DC10plus card. |
| * |
| * Changes by Ronald Bultje <rbultje@ronald.bitfreak.net> |
| * - moved over to linux>=2.4.x i2c protocol (9/9/2002) |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/slab.h> |
| #include <linux/ioctl.h> |
| #include <linux/uaccess.h> |
| #include <linux/i2c.h> |
| #include <linux/videodev2.h> |
| #include <media/v4l2-device.h> |
| |
| MODULE_DESCRIPTION("Analog Devices ADV7175 video encoder driver"); |
| MODULE_AUTHOR("Dave Perks"); |
| MODULE_LICENSE("GPL"); |
| |
| #define I2C_ADV7175 0xd4 |
| #define I2C_ADV7176 0x54 |
| |
| |
| static int debug; |
| module_param(debug, int, 0); |
| MODULE_PARM_DESC(debug, "Debug level (0-1)"); |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| struct adv7175 { |
| struct v4l2_subdev sd; |
| v4l2_std_id norm; |
| int input; |
| }; |
| |
| static inline struct adv7175 *to_adv7175(struct v4l2_subdev *sd) |
| { |
| return container_of(sd, struct adv7175, sd); |
| } |
| |
| static char *inputs[] = { "pass_through", "play_back", "color_bar" }; |
| |
| static u32 adv7175_codes[] = { |
| MEDIA_BUS_FMT_UYVY8_2X8, |
| MEDIA_BUS_FMT_UYVY8_1X16, |
| }; |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static inline int adv7175_write(struct v4l2_subdev *sd, u8 reg, u8 value) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| |
| return i2c_smbus_write_byte_data(client, reg, value); |
| } |
| |
| static inline int adv7175_read(struct v4l2_subdev *sd, u8 reg) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| |
| return i2c_smbus_read_byte_data(client, reg); |
| } |
| |
| static int adv7175_write_block(struct v4l2_subdev *sd, |
| const u8 *data, unsigned int len) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| int ret = -1; |
| u8 reg; |
| |
| /* the adv7175 has an autoincrement function, use it if |
| * the adapter understands raw I2C */ |
| if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { |
| /* do raw I2C, not smbus compatible */ |
| u8 block_data[32]; |
| int block_len; |
| |
| while (len >= 2) { |
| block_len = 0; |
| block_data[block_len++] = reg = data[0]; |
| do { |
| block_data[block_len++] = data[1]; |
| reg++; |
| len -= 2; |
| data += 2; |
| } while (len >= 2 && data[0] == reg && block_len < 32); |
| ret = i2c_master_send(client, block_data, block_len); |
| if (ret < 0) |
| break; |
| } |
| } else { |
| /* do some slow I2C emulation kind of thing */ |
| while (len >= 2) { |
| reg = *data++; |
| ret = adv7175_write(sd, reg, *data++); |
| if (ret < 0) |
| break; |
| len -= 2; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static void set_subcarrier_freq(struct v4l2_subdev *sd, int pass_through) |
| { |
| /* for some reason pass_through NTSC needs |
| * a different sub-carrier freq to remain stable. */ |
| if (pass_through) |
| adv7175_write(sd, 0x02, 0x00); |
| else |
| adv7175_write(sd, 0x02, 0x55); |
| |
| adv7175_write(sd, 0x03, 0x55); |
| adv7175_write(sd, 0x04, 0x55); |
| adv7175_write(sd, 0x05, 0x25); |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| /* Output filter: S-Video Composite */ |
| |
| #define MR050 0x11 /* 0x09 */ |
| #define MR060 0x14 /* 0x0c */ |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| #define TR0MODE 0x46 |
| #define TR0RST 0x80 |
| |
| #define TR1CAPT 0x80 |
| #define TR1PLAY 0x00 |
| |
| static const unsigned char init_common[] = { |
| |
| 0x00, MR050, /* MR0, PAL enabled */ |
| 0x01, 0x00, /* MR1 */ |
| 0x02, 0x0c, /* subc. freq. */ |
| 0x03, 0x8c, /* subc. freq. */ |
| 0x04, 0x79, /* subc. freq. */ |
| 0x05, 0x26, /* subc. freq. */ |
| 0x06, 0x40, /* subc. phase */ |
| |
| 0x07, TR0MODE, /* TR0, 16bit */ |
| 0x08, 0x21, /* */ |
| 0x09, 0x00, /* */ |
| 0x0a, 0x00, /* */ |
| 0x0b, 0x00, /* */ |
| 0x0c, TR1CAPT, /* TR1 */ |
| 0x0d, 0x4f, /* MR2 */ |
| 0x0e, 0x00, /* */ |
| 0x0f, 0x00, /* */ |
| 0x10, 0x00, /* */ |
| 0x11, 0x00, /* */ |
| }; |
| |
| static const unsigned char init_pal[] = { |
| 0x00, MR050, /* MR0, PAL enabled */ |
| 0x01, 0x00, /* MR1 */ |
| 0x02, 0x0c, /* subc. freq. */ |
| 0x03, 0x8c, /* subc. freq. */ |
| 0x04, 0x79, /* subc. freq. */ |
| 0x05, 0x26, /* subc. freq. */ |
| 0x06, 0x40, /* subc. phase */ |
| }; |
| |
| static const unsigned char init_ntsc[] = { |
| 0x00, MR060, /* MR0, NTSC enabled */ |
| 0x01, 0x00, /* MR1 */ |
| 0x02, 0x55, /* subc. freq. */ |
| 0x03, 0x55, /* subc. freq. */ |
| 0x04, 0x55, /* subc. freq. */ |
| 0x05, 0x25, /* subc. freq. */ |
| 0x06, 0x1a, /* subc. phase */ |
| }; |
| |
| static int adv7175_init(struct v4l2_subdev *sd, u32 val) |
| { |
| /* This is just for testing!!! */ |
| adv7175_write_block(sd, init_common, sizeof(init_common)); |
| adv7175_write(sd, 0x07, TR0MODE | TR0RST); |
| adv7175_write(sd, 0x07, TR0MODE); |
| return 0; |
| } |
| |
| static int adv7175_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std) |
| { |
| struct adv7175 *encoder = to_adv7175(sd); |
| |
| if (std & V4L2_STD_NTSC) { |
| adv7175_write_block(sd, init_ntsc, sizeof(init_ntsc)); |
| if (encoder->input == 0) |
| adv7175_write(sd, 0x0d, 0x4f); /* Enable genlock */ |
| adv7175_write(sd, 0x07, TR0MODE | TR0RST); |
| adv7175_write(sd, 0x07, TR0MODE); |
| } else if (std & V4L2_STD_PAL) { |
| adv7175_write_block(sd, init_pal, sizeof(init_pal)); |
| if (encoder->input == 0) |
| adv7175_write(sd, 0x0d, 0x4f); /* Enable genlock */ |
| adv7175_write(sd, 0x07, TR0MODE | TR0RST); |
| adv7175_write(sd, 0x07, TR0MODE); |
| } else if (std & V4L2_STD_SECAM) { |
| /* This is an attempt to convert |
| * SECAM->PAL (typically it does not work |
| * due to genlock: when decoder is in SECAM |
| * and encoder in in PAL the subcarrier can |
| * not be synchronized with horizontal |
| * quency) */ |
| adv7175_write_block(sd, init_pal, sizeof(init_pal)); |
| if (encoder->input == 0) |
| adv7175_write(sd, 0x0d, 0x49); /* Disable genlock */ |
| adv7175_write(sd, 0x07, TR0MODE | TR0RST); |
| adv7175_write(sd, 0x07, TR0MODE); |
| } else { |
| v4l2_dbg(1, debug, sd, "illegal norm: %llx\n", |
| (unsigned long long)std); |
| return -EINVAL; |
| } |
| v4l2_dbg(1, debug, sd, "switched to %llx\n", (unsigned long long)std); |
| encoder->norm = std; |
| return 0; |
| } |
| |
| static int adv7175_s_routing(struct v4l2_subdev *sd, |
| u32 input, u32 output, u32 config) |
| { |
| struct adv7175 *encoder = to_adv7175(sd); |
| |
| /* RJ: input = 0: input is from decoder |
| input = 1: input is from ZR36060 |
| input = 2: color bar */ |
| |
| switch (input) { |
| case 0: |
| adv7175_write(sd, 0x01, 0x00); |
| |
| if (encoder->norm & V4L2_STD_NTSC) |
| set_subcarrier_freq(sd, 1); |
| |
| adv7175_write(sd, 0x0c, TR1CAPT); /* TR1 */ |
| if (encoder->norm & V4L2_STD_SECAM) |
| adv7175_write(sd, 0x0d, 0x49); /* Disable genlock */ |
| else |
| adv7175_write(sd, 0x0d, 0x4f); /* Enable genlock */ |
| adv7175_write(sd, 0x07, TR0MODE | TR0RST); |
| adv7175_write(sd, 0x07, TR0MODE); |
| /*udelay(10);*/ |
| break; |
| |
| case 1: |
| adv7175_write(sd, 0x01, 0x00); |
| |
| if (encoder->norm & V4L2_STD_NTSC) |
| set_subcarrier_freq(sd, 0); |
| |
| adv7175_write(sd, 0x0c, TR1PLAY); /* TR1 */ |
| adv7175_write(sd, 0x0d, 0x49); |
| adv7175_write(sd, 0x07, TR0MODE | TR0RST); |
| adv7175_write(sd, 0x07, TR0MODE); |
| /* udelay(10); */ |
| break; |
| |
| case 2: |
| adv7175_write(sd, 0x01, 0x80); |
| |
| if (encoder->norm & V4L2_STD_NTSC) |
| set_subcarrier_freq(sd, 0); |
| |
| adv7175_write(sd, 0x0d, 0x49); |
| adv7175_write(sd, 0x07, TR0MODE | TR0RST); |
| adv7175_write(sd, 0x07, TR0MODE); |
| /* udelay(10); */ |
| break; |
| |
| default: |
| v4l2_dbg(1, debug, sd, "illegal input: %d\n", input); |
| return -EINVAL; |
| } |
| v4l2_dbg(1, debug, sd, "switched to %s\n", inputs[input]); |
| encoder->input = input; |
| return 0; |
| } |
| |
| static int adv7175_enum_mbus_code(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_mbus_code_enum *code) |
| { |
| if (code->pad || code->index >= ARRAY_SIZE(adv7175_codes)) |
| return -EINVAL; |
| |
| code->code = adv7175_codes[code->index]; |
| return 0; |
| } |
| |
| static int adv7175_get_fmt(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_format *format) |
| { |
| struct v4l2_mbus_framefmt *mf = &format->format; |
| u8 val = adv7175_read(sd, 0x7); |
| |
| if (format->pad) |
| return -EINVAL; |
| |
| if ((val & 0x40) == (1 << 6)) |
| mf->code = MEDIA_BUS_FMT_UYVY8_1X16; |
| else |
| mf->code = MEDIA_BUS_FMT_UYVY8_2X8; |
| |
| mf->colorspace = V4L2_COLORSPACE_SMPTE170M; |
| mf->width = 0; |
| mf->height = 0; |
| mf->field = V4L2_FIELD_ANY; |
| |
| return 0; |
| } |
| |
| static int adv7175_set_fmt(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_format *format) |
| { |
| struct v4l2_mbus_framefmt *mf = &format->format; |
| u8 val = adv7175_read(sd, 0x7); |
| int ret = 0; |
| |
| if (format->pad) |
| return -EINVAL; |
| |
| switch (mf->code) { |
| case MEDIA_BUS_FMT_UYVY8_2X8: |
| val &= ~0x40; |
| break; |
| |
| case MEDIA_BUS_FMT_UYVY8_1X16: |
| val |= 0x40; |
| break; |
| |
| default: |
| v4l2_dbg(1, debug, sd, |
| "illegal v4l2_mbus_framefmt code: %d\n", mf->code); |
| return -EINVAL; |
| } |
| |
| if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) |
| ret = adv7175_write(sd, 0x7, val); |
| |
| return ret; |
| } |
| |
| static int adv7175_s_power(struct v4l2_subdev *sd, int on) |
| { |
| if (on) |
| adv7175_write(sd, 0x01, 0x00); |
| else |
| adv7175_write(sd, 0x01, 0x78); |
| |
| return 0; |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static const struct v4l2_subdev_core_ops adv7175_core_ops = { |
| .init = adv7175_init, |
| .s_power = adv7175_s_power, |
| }; |
| |
| static const struct v4l2_subdev_video_ops adv7175_video_ops = { |
| .s_std_output = adv7175_s_std_output, |
| .s_routing = adv7175_s_routing, |
| }; |
| |
| static const struct v4l2_subdev_pad_ops adv7175_pad_ops = { |
| .enum_mbus_code = adv7175_enum_mbus_code, |
| .get_fmt = adv7175_get_fmt, |
| .set_fmt = adv7175_set_fmt, |
| }; |
| |
| static const struct v4l2_subdev_ops adv7175_ops = { |
| .core = &adv7175_core_ops, |
| .video = &adv7175_video_ops, |
| .pad = &adv7175_pad_ops, |
| }; |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static int adv7175_probe(struct i2c_client *client) |
| { |
| int i; |
| struct adv7175 *encoder; |
| struct v4l2_subdev *sd; |
| |
| /* Check if the adapter supports the needed features */ |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| return -ENODEV; |
| |
| v4l_info(client, "chip found @ 0x%x (%s)\n", |
| client->addr << 1, client->adapter->name); |
| |
| encoder = devm_kzalloc(&client->dev, sizeof(*encoder), GFP_KERNEL); |
| if (encoder == NULL) |
| return -ENOMEM; |
| sd = &encoder->sd; |
| v4l2_i2c_subdev_init(sd, client, &adv7175_ops); |
| encoder->norm = V4L2_STD_NTSC; |
| encoder->input = 0; |
| |
| i = adv7175_write_block(sd, init_common, sizeof(init_common)); |
| if (i >= 0) { |
| i = adv7175_write(sd, 0x07, TR0MODE | TR0RST); |
| i = adv7175_write(sd, 0x07, TR0MODE); |
| i = adv7175_read(sd, 0x12); |
| v4l2_dbg(1, debug, sd, "revision %d\n", i & 1); |
| } |
| if (i < 0) |
| v4l2_dbg(1, debug, sd, "init error 0x%x\n", i); |
| return 0; |
| } |
| |
| static void adv7175_remove(struct i2c_client *client) |
| { |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| |
| v4l2_device_unregister_subdev(sd); |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static const struct i2c_device_id adv7175_id[] = { |
| { "adv7175", 0 }, |
| { "adv7176", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, adv7175_id); |
| |
| static struct i2c_driver adv7175_driver = { |
| .driver = { |
| .name = "adv7175", |
| }, |
| .probe_new = adv7175_probe, |
| .remove = adv7175_remove, |
| .id_table = adv7175_id, |
| }; |
| |
| module_i2c_driver(adv7175_driver); |