| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Driver for VGXY61 global shutter sensor family driver |
| * |
| * Copyright (C) 2022 STMicroelectronics SA |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/i2c.h> |
| #include <linux/iopoll.h> |
| #include <linux/module.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/units.h> |
| |
| #include <asm/unaligned.h> |
| |
| #include <media/mipi-csi2.h> |
| #include <media/v4l2-async.h> |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-fwnode.h> |
| #include <media/v4l2-subdev.h> |
| |
| #define VGXY61_REG_8BIT(n) ((1 << 16) | (n)) |
| #define VGXY61_REG_16BIT(n) ((2 << 16) | (n)) |
| #define VGXY61_REG_32BIT(n) ((4 << 16) | (n)) |
| #define VGXY61_REG_SIZE_SHIFT 16 |
| #define VGXY61_REG_ADDR_MASK 0xffff |
| |
| #define VGXY61_REG_MODEL_ID VGXY61_REG_16BIT(0x0000) |
| #define VG5661_MODEL_ID 0x5661 |
| #define VG5761_MODEL_ID 0x5761 |
| #define VGXY61_REG_REVISION VGXY61_REG_16BIT(0x0002) |
| #define VGXY61_REG_FWPATCH_REVISION VGXY61_REG_16BIT(0x0014) |
| #define VGXY61_REG_FWPATCH_START_ADDR VGXY61_REG_8BIT(0x2000) |
| #define VGXY61_REG_SYSTEM_FSM VGXY61_REG_8BIT(0x0020) |
| #define VGXY61_SYSTEM_FSM_SW_STBY 0x03 |
| #define VGXY61_SYSTEM_FSM_STREAMING 0x04 |
| #define VGXY61_REG_NVM VGXY61_REG_8BIT(0x0023) |
| #define VGXY61_NVM_OK 0x04 |
| #define VGXY61_REG_STBY VGXY61_REG_8BIT(0x0201) |
| #define VGXY61_STBY_NO_REQ 0 |
| #define VGXY61_STBY_REQ_TMP_READ BIT(2) |
| #define VGXY61_REG_STREAMING VGXY61_REG_8BIT(0x0202) |
| #define VGXY61_STREAMING_NO_REQ 0 |
| #define VGXY61_STREAMING_REQ_STOP BIT(0) |
| #define VGXY61_STREAMING_REQ_START BIT(1) |
| #define VGXY61_REG_EXT_CLOCK VGXY61_REG_32BIT(0x0220) |
| #define VGXY61_REG_CLK_PLL_PREDIV VGXY61_REG_8BIT(0x0224) |
| #define VGXY61_REG_CLK_SYS_PLL_MULT VGXY61_REG_8BIT(0x0225) |
| #define VGXY61_REG_GPIO_0_CTRL VGXY61_REG_8BIT(0x0236) |
| #define VGXY61_REG_GPIO_1_CTRL VGXY61_REG_8BIT(0x0237) |
| #define VGXY61_REG_GPIO_2_CTRL VGXY61_REG_8BIT(0x0238) |
| #define VGXY61_REG_GPIO_3_CTRL VGXY61_REG_8BIT(0x0239) |
| #define VGXY61_REG_SIGNALS_POLARITY_CTRL VGXY61_REG_8BIT(0x023b) |
| #define VGXY61_REG_LINE_LENGTH VGXY61_REG_16BIT(0x0300) |
| #define VGXY61_REG_ORIENTATION VGXY61_REG_8BIT(0x0302) |
| #define VGXY61_REG_VT_CTRL VGXY61_REG_8BIT(0x0304) |
| #define VGXY61_REG_FORMAT_CTRL VGXY61_REG_8BIT(0x0305) |
| #define VGXY61_REG_OIF_CTRL VGXY61_REG_16BIT(0x0306) |
| #define VGXY61_REG_OIF_ROI0_CTRL VGXY61_REG_8BIT(0x030a) |
| #define VGXY61_REG_ROI0_START_H VGXY61_REG_16BIT(0x0400) |
| #define VGXY61_REG_ROI0_START_V VGXY61_REG_16BIT(0x0402) |
| #define VGXY61_REG_ROI0_END_H VGXY61_REG_16BIT(0x0404) |
| #define VGXY61_REG_ROI0_END_V VGXY61_REG_16BIT(0x0406) |
| #define VGXY61_REG_PATGEN_CTRL VGXY61_REG_32BIT(0x0440) |
| #define VGXY61_PATGEN_LONG_ENABLE BIT(16) |
| #define VGXY61_PATGEN_SHORT_ENABLE BIT(0) |
| #define VGXY61_PATGEN_LONG_TYPE_SHIFT 18 |
| #define VGXY61_PATGEN_SHORT_TYPE_SHIFT 4 |
| #define VGXY61_REG_FRAME_CONTENT_CTRL VGXY61_REG_8BIT(0x0478) |
| #define VGXY61_REG_COARSE_EXPOSURE_LONG VGXY61_REG_16BIT(0x0500) |
| #define VGXY61_REG_COARSE_EXPOSURE_SHORT VGXY61_REG_16BIT(0x0504) |
| #define VGXY61_REG_ANALOG_GAIN VGXY61_REG_8BIT(0x0508) |
| #define VGXY61_REG_DIGITAL_GAIN_LONG VGXY61_REG_16BIT(0x050a) |
| #define VGXY61_REG_DIGITAL_GAIN_SHORT VGXY61_REG_16BIT(0x0512) |
| #define VGXY61_REG_FRAME_LENGTH VGXY61_REG_16BIT(0x051a) |
| #define VGXY61_REG_SIGNALS_CTRL VGXY61_REG_16BIT(0x0522) |
| #define VGXY61_SIGNALS_GPIO_ID_SHIFT 4 |
| #define VGXY61_REG_READOUT_CTRL VGXY61_REG_8BIT(0x0530) |
| #define VGXY61_REG_HDR_CTRL VGXY61_REG_8BIT(0x0532) |
| #define VGXY61_REG_PATGEN_LONG_DATA_GR VGXY61_REG_16BIT(0x092c) |
| #define VGXY61_REG_PATGEN_LONG_DATA_R VGXY61_REG_16BIT(0x092e) |
| #define VGXY61_REG_PATGEN_LONG_DATA_B VGXY61_REG_16BIT(0x0930) |
| #define VGXY61_REG_PATGEN_LONG_DATA_GB VGXY61_REG_16BIT(0x0932) |
| #define VGXY61_REG_PATGEN_SHORT_DATA_GR VGXY61_REG_16BIT(0x0950) |
| #define VGXY61_REG_PATGEN_SHORT_DATA_R VGXY61_REG_16BIT(0x0952) |
| #define VGXY61_REG_PATGEN_SHORT_DATA_B VGXY61_REG_16BIT(0x0954) |
| #define VGXY61_REG_PATGEN_SHORT_DATA_GB VGXY61_REG_16BIT(0x0956) |
| #define VGXY61_REG_BYPASS_CTRL VGXY61_REG_8BIT(0x0a60) |
| |
| #define VGX661_WIDTH 1464 |
| #define VGX661_HEIGHT 1104 |
| #define VGX761_WIDTH 1944 |
| #define VGX761_HEIGHT 1204 |
| #define VGX661_DEFAULT_MODE 1 |
| #define VGX761_DEFAULT_MODE 1 |
| #define VGX661_SHORT_ROT_TERM 93 |
| #define VGX761_SHORT_ROT_TERM 90 |
| #define VGXY61_EXPOS_ROT_TERM 66 |
| #define VGXY61_WRITE_MULTIPLE_CHUNK_MAX 16 |
| #define VGXY61_NB_GPIOS 4 |
| #define VGXY61_NB_POLARITIES 5 |
| #define VGXY61_FRAME_LENGTH_DEF 1313 |
| #define VGXY61_MIN_FRAME_LENGTH 1288 |
| #define VGXY61_MIN_EXPOSURE 10 |
| #define VGXY61_HDR_LINEAR_RATIO 10 |
| #define VGXY61_TIMEOUT_MS 500 |
| #define VGXY61_MEDIA_BUS_FMT_DEF MEDIA_BUS_FMT_Y8_1X8 |
| |
| #define VGXY61_FWPATCH_REVISION_MAJOR 2 |
| #define VGXY61_FWPATCH_REVISION_MINOR 0 |
| #define VGXY61_FWPATCH_REVISION_MICRO 5 |
| |
| static const u8 patch_array[] = { |
| 0xbf, 0x00, 0x05, 0x20, 0x06, 0x01, 0xe0, 0xe0, 0x04, 0x80, 0xe6, 0x45, |
| 0xed, 0x6f, 0xfe, 0xff, 0x14, 0x80, 0x1f, 0x84, 0x10, 0x42, 0x05, 0x7c, |
| 0x01, 0xc4, 0x1e, 0x80, 0xb6, 0x42, 0x00, 0xe0, 0x1e, 0x82, 0x1e, 0xc0, |
| 0x93, 0xdd, 0xc3, 0xc1, 0x0c, 0x04, 0x00, 0xfa, 0x86, 0x0d, 0x70, 0xe1, |
| 0x04, 0x98, 0x15, 0x00, 0x28, 0xe0, 0x14, 0x02, 0x08, 0xfc, 0x15, 0x40, |
| 0x28, 0xe0, 0x98, 0x58, 0xe0, 0xef, 0x04, 0x98, 0x0e, 0x04, 0x00, 0xf0, |
| 0x15, 0x00, 0x28, 0xe0, 0x19, 0xc8, 0x15, 0x40, 0x28, 0xe0, 0xc6, 0x41, |
| 0xfc, 0xe0, 0x14, 0x80, 0x1f, 0x84, 0x14, 0x02, 0xa0, 0xfc, 0x1e, 0x80, |
| 0x14, 0x80, 0x14, 0x02, 0x80, 0xfb, 0x14, 0x02, 0xe0, 0xfc, 0x1e, 0x80, |
| 0x14, 0xc0, 0x1f, 0x84, 0x14, 0x02, 0xa4, 0xfc, 0x1e, 0xc0, 0x14, 0xc0, |
| 0x14, 0x02, 0x80, 0xfb, 0x14, 0x02, 0xe4, 0xfc, 0x1e, 0xc0, 0x0c, 0x0c, |
| 0x00, 0xf2, 0x93, 0xdd, 0x86, 0x00, 0xf8, 0xe0, 0x04, 0x80, 0xc6, 0x03, |
| 0x70, 0xe1, 0x0e, 0x84, 0x93, 0xdd, 0xc3, 0xc1, 0x0c, 0x04, 0x00, 0xfa, |
| 0x6b, 0x80, 0x06, 0x40, 0x6c, 0xe1, 0x04, 0x80, 0x09, 0x00, 0xe0, 0xe0, |
| 0x0b, 0xa1, 0x95, 0x84, 0x05, 0x0c, 0x1c, 0xe0, 0x86, 0x02, 0xf9, 0x60, |
| 0xe0, 0xcf, 0x78, 0x6e, 0x80, 0xef, 0x25, 0x0c, 0x18, 0xe0, 0x05, 0x4c, |
| 0x1c, 0xe0, 0x86, 0x02, 0xf9, 0x60, 0xe0, 0xcf, 0x0b, 0x84, 0xd8, 0x6d, |
| 0x80, 0xef, 0x05, 0x4c, 0x18, 0xe0, 0x04, 0xd8, 0x0b, 0xa5, 0x95, 0x84, |
| 0x05, 0x0c, 0x2c, 0xe0, 0x06, 0x02, 0x01, 0x60, 0xe0, 0xce, 0x18, 0x6d, |
| 0x80, 0xef, 0x25, 0x0c, 0x30, 0xe0, 0x05, 0x4c, 0x2c, 0xe0, 0x06, 0x02, |
| 0x01, 0x60, 0xe0, 0xce, 0x0b, 0x84, 0x78, 0x6c, 0x80, 0xef, 0x05, 0x4c, |
| 0x30, 0xe0, 0x0c, 0x0c, 0x00, 0xf2, 0x93, 0xdd, 0x46, 0x01, 0x70, 0xe1, |
| 0x08, 0x80, 0x0b, 0xa1, 0x08, 0x5c, 0x00, 0xda, 0x06, 0x01, 0x68, 0xe1, |
| 0x04, 0x80, 0x4a, 0x40, 0x84, 0xe0, 0x08, 0x5c, 0x00, 0x9a, 0x06, 0x01, |
| 0xe0, 0xe0, 0x04, 0x80, 0x15, 0x00, 0x60, 0xe0, 0x19, 0xc4, 0x15, 0x40, |
| 0x60, 0xe0, 0x15, 0x00, 0x78, 0xe0, 0x19, 0xc4, 0x15, 0x40, 0x78, 0xe0, |
| 0x93, 0xdd, 0xc3, 0xc1, 0x46, 0x01, 0x70, 0xe1, 0x08, 0x80, 0x0b, 0xa1, |
| 0x08, 0x5c, 0x00, 0xda, 0x06, 0x01, 0x68, 0xe1, 0x04, 0x80, 0x4a, 0x40, |
| 0x84, 0xe0, 0x08, 0x5c, 0x00, 0x9a, 0x06, 0x01, 0xe0, 0xe0, 0x14, 0x80, |
| 0x25, 0x02, 0x54, 0xe0, 0x29, 0xc4, 0x25, 0x42, 0x54, 0xe0, 0x24, 0x80, |
| 0x35, 0x04, 0x6c, 0xe0, 0x39, 0xc4, 0x35, 0x44, 0x6c, 0xe0, 0x25, 0x02, |
| 0x64, 0xe0, 0x29, 0xc4, 0x25, 0x42, 0x64, 0xe0, 0x04, 0x80, 0x15, 0x00, |
| 0x7c, 0xe0, 0x19, 0xc4, 0x15, 0x40, 0x7c, 0xe0, 0x93, 0xdd, 0xc3, 0xc1, |
| 0x4c, 0x04, 0x7c, 0xfa, 0x86, 0x40, 0x98, 0xe0, 0x14, 0x80, 0x1b, 0xa1, |
| 0x06, 0x00, 0x00, 0xc0, 0x08, 0x42, 0x38, 0xdc, 0x08, 0x64, 0xa0, 0xef, |
| 0x86, 0x42, 0x3c, 0xe0, 0x68, 0x49, 0x80, 0xef, 0x6b, 0x80, 0x78, 0x53, |
| 0xc8, 0xef, 0xc6, 0x54, 0x6c, 0xe1, 0x7b, 0x80, 0xb5, 0x14, 0x0c, 0xf8, |
| 0x05, 0x14, 0x14, 0xf8, 0x1a, 0xac, 0x8a, 0x80, 0x0b, 0x90, 0x38, 0x55, |
| 0x80, 0xef, 0x1a, 0xae, 0x17, 0xc2, 0x03, 0x82, 0x88, 0x65, 0x80, 0xef, |
| 0x1b, 0x80, 0x0b, 0x8e, 0x68, 0x65, 0x80, 0xef, 0x9b, 0x80, 0x0b, 0x8c, |
| 0x08, 0x65, 0x80, 0xef, 0x6b, 0x80, 0x0b, 0x92, 0x1b, 0x8c, 0x98, 0x64, |
| 0x80, 0xef, 0x1a, 0xec, 0x9b, 0x80, 0x0b, 0x90, 0x95, 0x54, 0x10, 0xe0, |
| 0xa8, 0x53, 0x80, 0xef, 0x1a, 0xee, 0x17, 0xc2, 0x03, 0x82, 0xf8, 0x63, |
| 0x80, 0xef, 0x1b, 0x80, 0x0b, 0x8e, 0xd8, 0x63, 0x80, 0xef, 0x1b, 0x8c, |
| 0x68, 0x63, 0x80, 0xef, 0x6b, 0x80, 0x0b, 0x92, 0x65, 0x54, 0x14, 0xe0, |
| 0x08, 0x65, 0x84, 0xef, 0x68, 0x63, 0x80, 0xef, 0x7b, 0x80, 0x0b, 0x8c, |
| 0xa8, 0x64, 0x84, 0xef, 0x08, 0x63, 0x80, 0xef, 0x14, 0xe8, 0x46, 0x44, |
| 0x94, 0xe1, 0x24, 0x88, 0x4a, 0x4e, 0x04, 0xe0, 0x14, 0xea, 0x1a, 0x04, |
| 0x08, 0xe0, 0x0a, 0x40, 0x84, 0xed, 0x0c, 0x04, 0x00, 0xe2, 0x4a, 0x40, |
| 0x04, 0xe0, 0x19, 0x16, 0xc0, 0xe0, 0x0a, 0x40, 0x84, 0xed, 0x21, 0x54, |
| 0x60, 0xe0, 0x0c, 0x04, 0x00, 0xe2, 0x1b, 0xa5, 0x0e, 0xea, 0x01, 0x89, |
| 0x21, 0x54, 0x64, 0xe0, 0x7e, 0xe8, 0x65, 0x82, 0x1b, 0xa7, 0x26, 0x00, |
| 0x00, 0x80, 0xa5, 0x82, 0x1b, 0xa9, 0x65, 0x82, 0x1b, 0xa3, 0x01, 0x85, |
| 0x16, 0x00, 0x00, 0xc0, 0x01, 0x54, 0x04, 0xf8, 0x06, 0xaa, 0x01, 0x83, |
| 0x06, 0xa8, 0x65, 0x81, 0x06, 0xa8, 0x01, 0x54, 0x04, 0xf8, 0x01, 0x83, |
| 0x06, 0xaa, 0x09, 0x14, 0x18, 0xf8, 0x0b, 0xa1, 0x05, 0x84, 0xc6, 0x42, |
| 0xd4, 0xe0, 0x14, 0x84, 0x01, 0x83, 0x01, 0x54, 0x60, 0xe0, 0x01, 0x54, |
| 0x64, 0xe0, 0x0b, 0x02, 0x90, 0xe0, 0x10, 0x02, 0x90, 0xe5, 0x01, 0x54, |
| 0x88, 0xe0, 0xb5, 0x81, 0xc6, 0x40, 0xd4, 0xe0, 0x14, 0x80, 0x0b, 0x02, |
| 0xe0, 0xe4, 0x10, 0x02, 0x31, 0x66, 0x02, 0xc0, 0x01, 0x54, 0x88, 0xe0, |
| 0x1a, 0x84, 0x29, 0x14, 0x10, 0xe0, 0x1c, 0xaa, 0x2b, 0xa1, 0xf5, 0x82, |
| 0x25, 0x14, 0x10, 0xf8, 0x2b, 0x04, 0xa8, 0xe0, 0x20, 0x44, 0x0d, 0x70, |
| 0x03, 0xc0, 0x2b, 0xa1, 0x04, 0x00, 0x80, 0x9a, 0x02, 0x40, 0x84, 0x90, |
| 0x03, 0x54, 0x04, 0x80, 0x4c, 0x0c, 0x7c, 0xf2, 0x93, 0xdd, 0x00, 0x00, |
| 0x02, 0xa9, 0x00, 0x00, 0x64, 0x4a, 0x40, 0x00, 0x08, 0x2d, 0x58, 0xe0, |
| 0xa8, 0x98, 0x40, 0x00, 0x28, 0x07, 0x34, 0xe0, 0x05, 0xb9, 0x00, 0x00, |
| 0x28, 0x00, 0x41, 0x05, 0x88, 0x00, 0x41, 0x3c, 0x98, 0x00, 0x41, 0x52, |
| 0x04, 0x01, 0x41, 0x79, 0x3c, 0x01, 0x41, 0x6a, 0x3d, 0xfe, 0x00, 0x00, |
| }; |
| |
| static const char * const vgxy61_test_pattern_menu[] = { |
| "Disabled", |
| "Solid", |
| "Colorbar", |
| "Gradbar", |
| "Hgrey", |
| "Vgrey", |
| "Dgrey", |
| "PN28", |
| }; |
| |
| static const char * const vgxy61_hdr_mode_menu[] = { |
| "HDR linearize", |
| "HDR substraction", |
| "No HDR", |
| }; |
| |
| static const char * const vgxy61_supply_name[] = { |
| "VCORE", |
| "VDDIO", |
| "VANA", |
| }; |
| |
| static const s64 link_freq[] = { |
| /* |
| * MIPI output freq is 804Mhz / 2, as it uses both rising edge and |
| * falling edges to send data |
| */ |
| 402000000ULL |
| }; |
| |
| enum vgxy61_bin_mode { |
| VGXY61_BIN_MODE_NORMAL, |
| VGXY61_BIN_MODE_DIGITAL_X2, |
| VGXY61_BIN_MODE_DIGITAL_X4, |
| }; |
| |
| enum vgxy61_hdr_mode { |
| VGXY61_HDR_LINEAR, |
| VGXY61_HDR_SUB, |
| VGXY61_NO_HDR, |
| }; |
| |
| enum vgxy61_strobe_mode { |
| VGXY61_STROBE_DISABLED, |
| VGXY61_STROBE_LONG, |
| VGXY61_STROBE_ENABLED, |
| }; |
| |
| struct vgxy61_mode_info { |
| u32 width; |
| u32 height; |
| enum vgxy61_bin_mode bin_mode; |
| struct v4l2_rect crop; |
| }; |
| |
| struct vgxy61_fmt_desc { |
| u32 code; |
| u8 bpp; |
| u8 data_type; |
| }; |
| |
| static const struct vgxy61_fmt_desc vgxy61_supported_codes[] = { |
| { |
| .code = MEDIA_BUS_FMT_Y8_1X8, |
| .bpp = 8, |
| .data_type = MIPI_CSI2_DT_RAW8, |
| }, |
| { |
| .code = MEDIA_BUS_FMT_Y10_1X10, |
| .bpp = 10, |
| .data_type = MIPI_CSI2_DT_RAW10, |
| }, |
| { |
| .code = MEDIA_BUS_FMT_Y12_1X12, |
| .bpp = 12, |
| .data_type = MIPI_CSI2_DT_RAW12, |
| }, |
| { |
| .code = MEDIA_BUS_FMT_Y14_1X14, |
| .bpp = 14, |
| .data_type = MIPI_CSI2_DT_RAW14, |
| }, |
| { |
| .code = MEDIA_BUS_FMT_Y16_1X16, |
| .bpp = 16, |
| .data_type = MIPI_CSI2_DT_RAW16, |
| }, |
| }; |
| |
| static const struct vgxy61_mode_info vgx661_mode_data[] = { |
| { |
| .width = VGX661_WIDTH, |
| .height = VGX661_HEIGHT, |
| .bin_mode = VGXY61_BIN_MODE_NORMAL, |
| .crop = { |
| .left = 0, |
| .top = 0, |
| .width = VGX661_WIDTH, |
| .height = VGX661_HEIGHT, |
| }, |
| }, |
| { |
| .width = 1280, |
| .height = 720, |
| .bin_mode = VGXY61_BIN_MODE_NORMAL, |
| .crop = { |
| .left = 92, |
| .top = 192, |
| .width = 1280, |
| .height = 720, |
| }, |
| }, |
| { |
| .width = 640, |
| .height = 480, |
| .bin_mode = VGXY61_BIN_MODE_DIGITAL_X2, |
| .crop = { |
| .left = 92, |
| .top = 72, |
| .width = 1280, |
| .height = 960, |
| }, |
| }, |
| { |
| .width = 320, |
| .height = 240, |
| .bin_mode = VGXY61_BIN_MODE_DIGITAL_X4, |
| .crop = { |
| .left = 92, |
| .top = 72, |
| .width = 1280, |
| .height = 960, |
| }, |
| }, |
| }; |
| |
| static const struct vgxy61_mode_info vgx761_mode_data[] = { |
| { |
| .width = VGX761_WIDTH, |
| .height = VGX761_HEIGHT, |
| .bin_mode = VGXY61_BIN_MODE_NORMAL, |
| .crop = { |
| .left = 0, |
| .top = 0, |
| .width = VGX761_WIDTH, |
| .height = VGX761_HEIGHT, |
| }, |
| }, |
| { |
| .width = 1920, |
| .height = 1080, |
| .bin_mode = VGXY61_BIN_MODE_NORMAL, |
| .crop = { |
| .left = 12, |
| .top = 62, |
| .width = 1920, |
| .height = 1080, |
| }, |
| }, |
| { |
| .width = 1280, |
| .height = 720, |
| .bin_mode = VGXY61_BIN_MODE_NORMAL, |
| .crop = { |
| .left = 332, |
| .top = 242, |
| .width = 1280, |
| .height = 720, |
| }, |
| }, |
| { |
| .width = 640, |
| .height = 480, |
| .bin_mode = VGXY61_BIN_MODE_DIGITAL_X2, |
| .crop = { |
| .left = 332, |
| .top = 122, |
| .width = 1280, |
| .height = 960, |
| }, |
| }, |
| { |
| .width = 320, |
| .height = 240, |
| .bin_mode = VGXY61_BIN_MODE_DIGITAL_X4, |
| .crop = { |
| .left = 332, |
| .top = 122, |
| .width = 1280, |
| .height = 960, |
| }, |
| }, |
| }; |
| |
| struct vgxy61_dev { |
| struct i2c_client *i2c_client; |
| struct v4l2_subdev sd; |
| struct media_pad pad; |
| struct regulator_bulk_data supplies[ARRAY_SIZE(vgxy61_supply_name)]; |
| struct gpio_desc *reset_gpio; |
| struct clk *xclk; |
| u32 clk_freq; |
| u16 id; |
| u16 sensor_width; |
| u16 sensor_height; |
| u16 oif_ctrl; |
| unsigned int nb_of_lane; |
| u32 data_rate_in_mbps; |
| u32 pclk; |
| u16 line_length; |
| u16 rot_term; |
| bool gpios_polarity; |
| /* Lock to protect all members below */ |
| struct mutex lock; |
| struct v4l2_ctrl_handler ctrl_handler; |
| struct v4l2_ctrl *pixel_rate_ctrl; |
| struct v4l2_ctrl *expo_ctrl; |
| struct v4l2_ctrl *vblank_ctrl; |
| struct v4l2_ctrl *vflip_ctrl; |
| struct v4l2_ctrl *hflip_ctrl; |
| bool streaming; |
| struct v4l2_mbus_framefmt fmt; |
| const struct vgxy61_mode_info *sensor_modes; |
| unsigned int sensor_modes_nb; |
| const struct vgxy61_mode_info *default_mode; |
| const struct vgxy61_mode_info *current_mode; |
| bool hflip; |
| bool vflip; |
| enum vgxy61_hdr_mode hdr; |
| u16 expo_long; |
| u16 expo_short; |
| u16 expo_max; |
| u16 expo_min; |
| u16 vblank; |
| u16 vblank_min; |
| u16 frame_length; |
| u16 digital_gain; |
| u8 analog_gain; |
| enum vgxy61_strobe_mode strobe_mode; |
| u32 pattern; |
| }; |
| |
| static u8 get_bpp_by_code(__u32 code) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE(vgxy61_supported_codes); i++) { |
| if (vgxy61_supported_codes[i].code == code) |
| return vgxy61_supported_codes[i].bpp; |
| } |
| /* Should never happen */ |
| WARN(1, "Unsupported code %d. default to 8 bpp", code); |
| return 8; |
| } |
| |
| static u8 get_data_type_by_code(__u32 code) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE(vgxy61_supported_codes); i++) { |
| if (vgxy61_supported_codes[i].code == code) |
| return vgxy61_supported_codes[i].data_type; |
| } |
| /* Should never happen */ |
| WARN(1, "Unsupported code %d. default to MIPI_CSI2_DT_RAW8 data type", |
| code); |
| return MIPI_CSI2_DT_RAW8; |
| } |
| |
| static void compute_pll_parameters_by_freq(u32 freq, u8 *prediv, u8 *mult) |
| { |
| const unsigned int predivs[] = {1, 2, 4}; |
| unsigned int i; |
| |
| /* |
| * Freq range is [6Mhz-27Mhz] already checked. |
| * Output of divider should be in [6Mhz-12Mhz[. |
| */ |
| for (i = 0; i < ARRAY_SIZE(predivs); i++) { |
| *prediv = predivs[i]; |
| if (freq / *prediv < 12 * HZ_PER_MHZ) |
| break; |
| } |
| WARN_ON(i == ARRAY_SIZE(predivs)); |
| |
| /* |
| * Target freq is 804Mhz. Don't change this as it will impact image |
| * quality. |
| */ |
| *mult = ((804 * HZ_PER_MHZ) * (*prediv) + freq / 2) / freq; |
| } |
| |
| static s32 get_pixel_rate(struct vgxy61_dev *sensor) |
| { |
| return div64_u64((u64)sensor->data_rate_in_mbps * sensor->nb_of_lane, |
| get_bpp_by_code(sensor->fmt.code)); |
| } |
| |
| static inline struct vgxy61_dev *to_vgxy61_dev(struct v4l2_subdev *sd) |
| { |
| return container_of(sd, struct vgxy61_dev, sd); |
| } |
| |
| static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl) |
| { |
| return &container_of(ctrl->handler, struct vgxy61_dev, |
| ctrl_handler)->sd; |
| } |
| |
| static unsigned int get_chunk_size(struct vgxy61_dev *sensor) |
| { |
| struct i2c_adapter *adapter = sensor->i2c_client->adapter; |
| int max_write_len = VGXY61_WRITE_MULTIPLE_CHUNK_MAX; |
| |
| if (adapter->quirks && adapter->quirks->max_write_len) |
| max_write_len = adapter->quirks->max_write_len - 2; |
| |
| max_write_len = min(max_write_len, VGXY61_WRITE_MULTIPLE_CHUNK_MAX); |
| |
| return max(max_write_len, 1); |
| } |
| |
| static int vgxy61_read_multiple(struct vgxy61_dev *sensor, u32 reg, |
| unsigned int len) |
| { |
| struct i2c_client *client = sensor->i2c_client; |
| struct i2c_msg msg[2]; |
| u8 buf[2]; |
| u8 val[sizeof(u32)] = {0}; |
| int ret; |
| |
| if (len > sizeof(u32)) |
| return -EINVAL; |
| buf[0] = reg >> 8; |
| buf[1] = reg & 0xff; |
| |
| msg[0].addr = client->addr; |
| msg[0].flags = client->flags; |
| msg[0].buf = buf; |
| msg[0].len = sizeof(buf); |
| |
| msg[1].addr = client->addr; |
| msg[1].flags = client->flags | I2C_M_RD; |
| msg[1].buf = val; |
| msg[1].len = len; |
| |
| ret = i2c_transfer(client->adapter, msg, 2); |
| if (ret < 0) { |
| dev_dbg(&client->dev, "%s: %x i2c_transfer, reg: %x => %d\n", |
| __func__, client->addr, reg, ret); |
| return ret; |
| } |
| |
| return get_unaligned_le32(val); |
| } |
| |
| static inline int vgxy61_read_reg(struct vgxy61_dev *sensor, u32 reg) |
| { |
| return vgxy61_read_multiple(sensor, reg & VGXY61_REG_ADDR_MASK, |
| (reg >> VGXY61_REG_SIZE_SHIFT) & 7); |
| } |
| |
| static int vgxy61_write_multiple(struct vgxy61_dev *sensor, u32 reg, |
| const u8 *data, unsigned int len, int *err) |
| { |
| struct i2c_client *client = sensor->i2c_client; |
| struct i2c_msg msg; |
| u8 buf[VGXY61_WRITE_MULTIPLE_CHUNK_MAX + 2]; |
| unsigned int i; |
| int ret; |
| |
| if (err && *err) |
| return *err; |
| |
| if (len > VGXY61_WRITE_MULTIPLE_CHUNK_MAX) |
| return -EINVAL; |
| buf[0] = reg >> 8; |
| buf[1] = reg & 0xff; |
| for (i = 0; i < len; i++) |
| buf[i + 2] = data[i]; |
| |
| msg.addr = client->addr; |
| msg.flags = client->flags; |
| msg.buf = buf; |
| msg.len = len + 2; |
| |
| ret = i2c_transfer(client->adapter, &msg, 1); |
| if (ret < 0) { |
| dev_dbg(&client->dev, "%s: i2c_transfer, reg: %x => %d\n", |
| __func__, reg, ret); |
| if (err) |
| *err = ret; |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int vgxy61_write_array(struct vgxy61_dev *sensor, u32 reg, |
| unsigned int nb, const u8 *array) |
| { |
| const unsigned int chunk_size = get_chunk_size(sensor); |
| int ret; |
| unsigned int sz; |
| |
| while (nb) { |
| sz = min(nb, chunk_size); |
| ret = vgxy61_write_multiple(sensor, reg, array, sz, NULL); |
| if (ret < 0) |
| return ret; |
| nb -= sz; |
| reg += sz; |
| array += sz; |
| } |
| |
| return 0; |
| } |
| |
| static inline int vgxy61_write_reg(struct vgxy61_dev *sensor, u32 reg, u32 val, |
| int *err) |
| { |
| return vgxy61_write_multiple(sensor, reg & VGXY61_REG_ADDR_MASK, |
| (u8 *)&val, |
| (reg >> VGXY61_REG_SIZE_SHIFT) & 7, err); |
| } |
| |
| static int vgxy61_poll_reg(struct vgxy61_dev *sensor, u32 reg, u8 poll_val, |
| unsigned int timeout_ms) |
| { |
| const unsigned int loop_delay_ms = 10; |
| int ret; |
| |
| return read_poll_timeout(vgxy61_read_reg, ret, |
| ((ret < 0) || (ret == poll_val)), |
| loop_delay_ms * 1000, timeout_ms * 1000, |
| false, sensor, reg); |
| } |
| |
| static int vgxy61_wait_state(struct vgxy61_dev *sensor, int state, |
| unsigned int timeout_ms) |
| { |
| return vgxy61_poll_reg(sensor, VGXY61_REG_SYSTEM_FSM, state, |
| timeout_ms); |
| } |
| |
| static int vgxy61_check_bw(struct vgxy61_dev *sensor) |
| { |
| /* |
| * Simplification of time needed to send short packets and for the MIPI |
| * to add transition times (EoT, LPS, and SoT packet delimiters) needed |
| * by the protocol to go in low power between 2 packets of data. This |
| * is a mipi IP constant for the sensor. |
| */ |
| const unsigned int mipi_margin = 1056; |
| unsigned int binning_scale = sensor->current_mode->crop.height / |
| sensor->current_mode->height; |
| u8 bpp = get_bpp_by_code(sensor->fmt.code); |
| unsigned int max_bit_per_line; |
| unsigned int bit_per_line; |
| u64 line_rate; |
| |
| line_rate = sensor->nb_of_lane * (u64)sensor->data_rate_in_mbps * |
| sensor->line_length; |
| max_bit_per_line = div64_u64(line_rate, sensor->pclk) - mipi_margin; |
| bit_per_line = (bpp * sensor->current_mode->width) / binning_scale; |
| |
| return bit_per_line > max_bit_per_line ? -EINVAL : 0; |
| } |
| |
| static int vgxy61_apply_exposure(struct vgxy61_dev *sensor) |
| { |
| int ret = 0; |
| |
| /* We first set expo to zero to avoid forbidden parameters couple */ |
| vgxy61_write_reg(sensor, VGXY61_REG_COARSE_EXPOSURE_SHORT, 0, &ret); |
| vgxy61_write_reg(sensor, VGXY61_REG_COARSE_EXPOSURE_LONG, |
| sensor->expo_long, &ret); |
| vgxy61_write_reg(sensor, VGXY61_REG_COARSE_EXPOSURE_SHORT, |
| sensor->expo_short, &ret); |
| |
| return ret; |
| } |
| |
| static int vgxy61_get_regulators(struct vgxy61_dev *sensor) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE(vgxy61_supply_name); i++) |
| sensor->supplies[i].supply = vgxy61_supply_name[i]; |
| |
| return devm_regulator_bulk_get(&sensor->i2c_client->dev, |
| ARRAY_SIZE(vgxy61_supply_name), |
| sensor->supplies); |
| } |
| |
| static int vgxy61_apply_reset(struct vgxy61_dev *sensor) |
| { |
| gpiod_set_value_cansleep(sensor->reset_gpio, 0); |
| usleep_range(5000, 10000); |
| gpiod_set_value_cansleep(sensor->reset_gpio, 1); |
| usleep_range(5000, 10000); |
| gpiod_set_value_cansleep(sensor->reset_gpio, 0); |
| usleep_range(40000, 100000); |
| return vgxy61_wait_state(sensor, VGXY61_SYSTEM_FSM_SW_STBY, |
| VGXY61_TIMEOUT_MS); |
| } |
| |
| static void vgxy61_fill_framefmt(struct vgxy61_dev *sensor, |
| const struct vgxy61_mode_info *mode, |
| struct v4l2_mbus_framefmt *fmt, u32 code) |
| { |
| fmt->code = code; |
| fmt->width = mode->width; |
| fmt->height = mode->height; |
| fmt->colorspace = V4L2_COLORSPACE_RAW; |
| fmt->field = V4L2_FIELD_NONE; |
| fmt->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; |
| fmt->quantization = V4L2_QUANTIZATION_DEFAULT; |
| fmt->xfer_func = V4L2_XFER_FUNC_DEFAULT; |
| } |
| |
| static int vgxy61_try_fmt_internal(struct v4l2_subdev *sd, |
| struct v4l2_mbus_framefmt *fmt, |
| const struct vgxy61_mode_info **new_mode) |
| { |
| struct vgxy61_dev *sensor = to_vgxy61_dev(sd); |
| const struct vgxy61_mode_info *mode = sensor->sensor_modes; |
| unsigned int index; |
| |
| for (index = 0; index < ARRAY_SIZE(vgxy61_supported_codes); index++) { |
| if (vgxy61_supported_codes[index].code == fmt->code) |
| break; |
| } |
| if (index == ARRAY_SIZE(vgxy61_supported_codes)) |
| index = 0; |
| |
| mode = v4l2_find_nearest_size(sensor->sensor_modes, |
| sensor->sensor_modes_nb, width, height, |
| fmt->width, fmt->height); |
| if (new_mode) |
| *new_mode = mode; |
| |
| vgxy61_fill_framefmt(sensor, mode, fmt, |
| vgxy61_supported_codes[index].code); |
| |
| return 0; |
| } |
| |
| static int vgxy61_get_selection(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_selection *sel) |
| { |
| struct vgxy61_dev *sensor = to_vgxy61_dev(sd); |
| |
| switch (sel->target) { |
| case V4L2_SEL_TGT_CROP: |
| sel->r = sensor->current_mode->crop; |
| return 0; |
| case V4L2_SEL_TGT_NATIVE_SIZE: |
| case V4L2_SEL_TGT_CROP_DEFAULT: |
| case V4L2_SEL_TGT_CROP_BOUNDS: |
| sel->r.top = 0; |
| sel->r.left = 0; |
| sel->r.width = sensor->sensor_width; |
| sel->r.height = sensor->sensor_height; |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int vgxy61_enum_mbus_code(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_mbus_code_enum *code) |
| { |
| if (code->index >= ARRAY_SIZE(vgxy61_supported_codes)) |
| return -EINVAL; |
| |
| code->code = vgxy61_supported_codes[code->index].code; |
| |
| return 0; |
| } |
| |
| static int vgxy61_get_fmt(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_format *format) |
| { |
| struct vgxy61_dev *sensor = to_vgxy61_dev(sd); |
| struct v4l2_mbus_framefmt *fmt; |
| |
| mutex_lock(&sensor->lock); |
| |
| if (format->which == V4L2_SUBDEV_FORMAT_TRY) |
| fmt = v4l2_subdev_get_try_format(&sensor->sd, sd_state, |
| format->pad); |
| else |
| fmt = &sensor->fmt; |
| |
| format->format = *fmt; |
| |
| mutex_unlock(&sensor->lock); |
| |
| return 0; |
| } |
| |
| static u16 vgxy61_get_vblank_min(struct vgxy61_dev *sensor, |
| enum vgxy61_hdr_mode hdr) |
| { |
| u16 min_vblank = VGXY61_MIN_FRAME_LENGTH - |
| sensor->current_mode->crop.height; |
| /* Ensure the first rule of thumb can't be negative */ |
| u16 min_vblank_hdr = VGXY61_MIN_EXPOSURE + sensor->rot_term + 1; |
| |
| if (hdr != VGXY61_NO_HDR) |
| return max(min_vblank, min_vblank_hdr); |
| return min_vblank; |
| } |
| |
| static int vgxy61_enum_frame_size(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_frame_size_enum *fse) |
| { |
| struct vgxy61_dev *sensor = to_vgxy61_dev(sd); |
| |
| if (fse->index >= sensor->sensor_modes_nb) |
| return -EINVAL; |
| |
| fse->min_width = sensor->sensor_modes[fse->index].width; |
| fse->max_width = fse->min_width; |
| fse->min_height = sensor->sensor_modes[fse->index].height; |
| fse->max_height = fse->min_height; |
| |
| return 0; |
| } |
| |
| static int vgxy61_update_analog_gain(struct vgxy61_dev *sensor, u32 target) |
| { |
| sensor->analog_gain = target; |
| |
| if (sensor->streaming) |
| return vgxy61_write_reg(sensor, VGXY61_REG_ANALOG_GAIN, target, |
| NULL); |
| return 0; |
| } |
| |
| static int vgxy61_apply_digital_gain(struct vgxy61_dev *sensor, |
| u32 digital_gain) |
| { |
| int ret = 0; |
| |
| /* |
| * For a monochrome version, configuring DIGITAL_GAIN_LONG_CH0 and |
| * DIGITAL_GAIN_SHORT_CH0 is enough to configure the gain of all |
| * four sub pixels. |
| */ |
| vgxy61_write_reg(sensor, VGXY61_REG_DIGITAL_GAIN_LONG, digital_gain, |
| &ret); |
| vgxy61_write_reg(sensor, VGXY61_REG_DIGITAL_GAIN_SHORT, digital_gain, |
| &ret); |
| |
| return ret; |
| } |
| |
| static int vgxy61_update_digital_gain(struct vgxy61_dev *sensor, u32 target) |
| { |
| sensor->digital_gain = target; |
| |
| if (sensor->streaming) |
| return vgxy61_apply_digital_gain(sensor, sensor->digital_gain); |
| return 0; |
| } |
| |
| static int vgxy61_apply_patgen(struct vgxy61_dev *sensor, u32 index) |
| { |
| static const u8 index2val[] = { |
| 0x0, 0x1, 0x2, 0x3, 0x10, 0x11, 0x12, 0x13 |
| }; |
| u32 pattern = index2val[index]; |
| u32 reg = (pattern << VGXY61_PATGEN_LONG_TYPE_SHIFT) | |
| (pattern << VGXY61_PATGEN_SHORT_TYPE_SHIFT); |
| |
| if (pattern) |
| reg |= VGXY61_PATGEN_LONG_ENABLE | VGXY61_PATGEN_SHORT_ENABLE; |
| return vgxy61_write_reg(sensor, VGXY61_REG_PATGEN_CTRL, reg, NULL); |
| } |
| |
| static int vgxy61_update_patgen(struct vgxy61_dev *sensor, u32 pattern) |
| { |
| sensor->pattern = pattern; |
| |
| if (sensor->streaming) |
| return vgxy61_apply_patgen(sensor, sensor->pattern); |
| return 0; |
| } |
| |
| static int vgxy61_apply_gpiox_strobe_mode(struct vgxy61_dev *sensor, |
| enum vgxy61_strobe_mode mode, |
| unsigned int idx) |
| { |
| static const u8 index2val[] = {0x0, 0x1, 0x3}; |
| int reg; |
| |
| reg = vgxy61_read_reg(sensor, VGXY61_REG_SIGNALS_CTRL); |
| if (reg < 0) |
| return reg; |
| reg &= ~(0xf << (idx * VGXY61_SIGNALS_GPIO_ID_SHIFT)); |
| reg |= index2val[mode] << (idx * VGXY61_SIGNALS_GPIO_ID_SHIFT); |
| |
| return vgxy61_write_reg(sensor, VGXY61_REG_SIGNALS_CTRL, reg, NULL); |
| } |
| |
| static int vgxy61_update_gpios_strobe_mode(struct vgxy61_dev *sensor, |
| enum vgxy61_hdr_mode hdr) |
| { |
| unsigned int i; |
| int ret; |
| |
| switch (hdr) { |
| case VGXY61_HDR_LINEAR: |
| sensor->strobe_mode = VGXY61_STROBE_ENABLED; |
| break; |
| case VGXY61_HDR_SUB: |
| case VGXY61_NO_HDR: |
| sensor->strobe_mode = VGXY61_STROBE_LONG; |
| break; |
| default: |
| /* Should never happen */ |
| WARN_ON(true); |
| break; |
| } |
| |
| if (!sensor->streaming) |
| return 0; |
| |
| for (i = 0; i < VGXY61_NB_GPIOS; i++) { |
| ret = vgxy61_apply_gpiox_strobe_mode(sensor, |
| sensor->strobe_mode, |
| i); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int vgxy61_update_gpios_strobe_polarity(struct vgxy61_dev *sensor, |
| bool polarity) |
| { |
| int ret = 0; |
| |
| if (sensor->streaming) |
| return -EBUSY; |
| |
| vgxy61_write_reg(sensor, VGXY61_REG_GPIO_0_CTRL, polarity << 1, &ret); |
| vgxy61_write_reg(sensor, VGXY61_REG_GPIO_1_CTRL, polarity << 1, &ret); |
| vgxy61_write_reg(sensor, VGXY61_REG_GPIO_2_CTRL, polarity << 1, &ret); |
| vgxy61_write_reg(sensor, VGXY61_REG_GPIO_3_CTRL, polarity << 1, &ret); |
| vgxy61_write_reg(sensor, VGXY61_REG_SIGNALS_POLARITY_CTRL, polarity, |
| &ret); |
| |
| return ret; |
| } |
| |
| static u32 vgxy61_get_expo_long_max(struct vgxy61_dev *sensor, |
| unsigned int short_expo_ratio) |
| { |
| u32 first_rot_max_expo, second_rot_max_expo, third_rot_max_expo; |
| |
| /* Apply sensor's rules of thumb */ |
| /* |
| * Short exposure + height must be less than frame length to avoid bad |
| * pixel line at the botom of the image |
| */ |
| first_rot_max_expo = |
| ((sensor->frame_length - sensor->current_mode->crop.height - |
| sensor->rot_term) * short_expo_ratio) - 1; |
| |
| /* |
| * Total exposition time must be less than frame length to avoid sensor |
| * crash |
| */ |
| second_rot_max_expo = |
| (((sensor->frame_length - VGXY61_EXPOS_ROT_TERM) * |
| short_expo_ratio) / (short_expo_ratio + 1)) - 1; |
| |
| /* |
| * Short exposure times 71 must be less than frame length to avoid |
| * sensor crash |
| */ |
| third_rot_max_expo = (sensor->frame_length / 71) * short_expo_ratio; |
| |
| /* Take the minimum from all rules */ |
| return min(min(first_rot_max_expo, second_rot_max_expo), |
| third_rot_max_expo); |
| } |
| |
| static int vgxy61_update_exposure(struct vgxy61_dev *sensor, u16 new_expo_long, |
| enum vgxy61_hdr_mode hdr) |
| { |
| struct i2c_client *client = sensor->i2c_client; |
| u16 new_expo_short = 0; |
| u16 expo_short_max = 0; |
| u16 expo_long_min = VGXY61_MIN_EXPOSURE; |
| u16 expo_long_max = 0; |
| |
| /* Compute short exposure according to hdr mode and long exposure */ |
| switch (hdr) { |
| case VGXY61_HDR_LINEAR: |
| /* |
| * Take ratio into account for minimal exposures in |
| * VGXY61_HDR_LINEAR |
| */ |
| expo_long_min = VGXY61_MIN_EXPOSURE * VGXY61_HDR_LINEAR_RATIO; |
| new_expo_long = max(expo_long_min, new_expo_long); |
| |
| expo_long_max = |
| vgxy61_get_expo_long_max(sensor, |
| VGXY61_HDR_LINEAR_RATIO); |
| expo_short_max = (expo_long_max + |
| (VGXY61_HDR_LINEAR_RATIO / 2)) / |
| VGXY61_HDR_LINEAR_RATIO; |
| new_expo_short = (new_expo_long + |
| (VGXY61_HDR_LINEAR_RATIO / 2)) / |
| VGXY61_HDR_LINEAR_RATIO; |
| break; |
| case VGXY61_HDR_SUB: |
| new_expo_long = max(expo_long_min, new_expo_long); |
| |
| expo_long_max = vgxy61_get_expo_long_max(sensor, 1); |
| /* Short and long are the same in VGXY61_HDR_SUB */ |
| expo_short_max = expo_long_max; |
| new_expo_short = new_expo_long; |
| break; |
| case VGXY61_NO_HDR: |
| new_expo_long = max(expo_long_min, new_expo_long); |
| |
| /* |
| * As short expo is 0 here, only the second rule of thumb |
| * applies, see vgxy61_get_expo_long_max for more |
| */ |
| expo_long_max = sensor->frame_length - VGXY61_EXPOS_ROT_TERM; |
| break; |
| default: |
| /* Should never happen */ |
| WARN_ON(true); |
| break; |
| } |
| |
| /* If this happens, something is wrong with formulas */ |
| WARN_ON(expo_long_min > expo_long_max); |
| |
| if (new_expo_long > expo_long_max) { |
| dev_warn(&client->dev, "Exposure %d too high, clamping to %d\n", |
| new_expo_long, expo_long_max); |
| new_expo_long = expo_long_max; |
| new_expo_short = expo_short_max; |
| } |
| |
| sensor->expo_long = new_expo_long; |
| sensor->expo_short = new_expo_short; |
| sensor->expo_max = expo_long_max; |
| sensor->expo_min = expo_long_min; |
| |
| if (sensor->streaming) |
| return vgxy61_apply_exposure(sensor); |
| return 0; |
| } |
| |
| static int vgxy61_apply_framelength(struct vgxy61_dev *sensor) |
| { |
| return vgxy61_write_reg(sensor, VGXY61_REG_FRAME_LENGTH, |
| sensor->frame_length, NULL); |
| } |
| |
| static int vgxy61_update_vblank(struct vgxy61_dev *sensor, u16 vblank, |
| enum vgxy61_hdr_mode hdr) |
| { |
| int ret; |
| |
| sensor->vblank_min = vgxy61_get_vblank_min(sensor, hdr); |
| sensor->vblank = max(sensor->vblank_min, vblank); |
| sensor->frame_length = sensor->current_mode->crop.height + |
| sensor->vblank; |
| |
| /* Update exposure according to vblank */ |
| ret = vgxy61_update_exposure(sensor, sensor->expo_long, hdr); |
| if (ret) |
| return ret; |
| |
| if (sensor->streaming) |
| return vgxy61_apply_framelength(sensor); |
| return 0; |
| } |
| |
| static int vgxy61_apply_hdr(struct vgxy61_dev *sensor, |
| enum vgxy61_hdr_mode index) |
| { |
| static const u8 index2val[] = {0x1, 0x4, 0xa}; |
| |
| return vgxy61_write_reg(sensor, VGXY61_REG_HDR_CTRL, index2val[index], |
| NULL); |
| } |
| |
| static int vgxy61_update_hdr(struct vgxy61_dev *sensor, |
| enum vgxy61_hdr_mode index) |
| { |
| int ret; |
| |
| /* |
| * vblank and short exposure change according to HDR mode, do it first |
| * as it can violate sensors 'rule of thumbs' and therefore will require |
| * to change the long exposure. |
| */ |
| ret = vgxy61_update_vblank(sensor, sensor->vblank, index); |
| if (ret) |
| return ret; |
| |
| /* Update strobe mode according to HDR */ |
| ret = vgxy61_update_gpios_strobe_mode(sensor, index); |
| if (ret) |
| return ret; |
| |
| sensor->hdr = index; |
| |
| if (sensor->streaming) |
| return vgxy61_apply_hdr(sensor, sensor->hdr); |
| return 0; |
| } |
| |
| static int vgxy61_apply_settings(struct vgxy61_dev *sensor) |
| { |
| int ret; |
| unsigned int i; |
| |
| ret = vgxy61_apply_hdr(sensor, sensor->hdr); |
| if (ret) |
| return ret; |
| |
| ret = vgxy61_apply_framelength(sensor); |
| if (ret) |
| return ret; |
| |
| ret = vgxy61_apply_exposure(sensor); |
| if (ret) |
| return ret; |
| |
| ret = vgxy61_write_reg(sensor, VGXY61_REG_ANALOG_GAIN, |
| sensor->analog_gain, NULL); |
| if (ret) |
| return ret; |
| ret = vgxy61_apply_digital_gain(sensor, sensor->digital_gain); |
| if (ret) |
| return ret; |
| |
| ret = vgxy61_write_reg(sensor, VGXY61_REG_ORIENTATION, |
| sensor->hflip | (sensor->vflip << 1), NULL); |
| if (ret) |
| return ret; |
| |
| ret = vgxy61_apply_patgen(sensor, sensor->pattern); |
| if (ret) |
| return ret; |
| |
| for (i = 0; i < VGXY61_NB_GPIOS; i++) { |
| ret = vgxy61_apply_gpiox_strobe_mode(sensor, |
| sensor->strobe_mode, i); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int vgxy61_stream_enable(struct vgxy61_dev *sensor) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(&sensor->sd); |
| const struct v4l2_rect *crop = &sensor->current_mode->crop; |
| int ret = 0; |
| |
| ret = vgxy61_check_bw(sensor); |
| if (ret) |
| return ret; |
| |
| ret = pm_runtime_get_sync(&client->dev); |
| if (ret < 0) { |
| pm_runtime_put_autosuspend(&client->dev); |
| return ret; |
| } |
| |
| /* pm_runtime_get_sync() can return 1 as a valid return code */ |
| ret = 0; |
| |
| vgxy61_write_reg(sensor, VGXY61_REG_FORMAT_CTRL, |
| get_bpp_by_code(sensor->fmt.code), &ret); |
| vgxy61_write_reg(sensor, VGXY61_REG_OIF_ROI0_CTRL, |
| get_data_type_by_code(sensor->fmt.code), &ret); |
| |
| vgxy61_write_reg(sensor, VGXY61_REG_READOUT_CTRL, |
| sensor->current_mode->bin_mode, &ret); |
| vgxy61_write_reg(sensor, VGXY61_REG_ROI0_START_H, crop->left, &ret); |
| vgxy61_write_reg(sensor, VGXY61_REG_ROI0_END_H, |
| crop->left + crop->width - 1, &ret); |
| vgxy61_write_reg(sensor, VGXY61_REG_ROI0_START_V, crop->top, &ret); |
| vgxy61_write_reg(sensor, VGXY61_REG_ROI0_END_V, |
| crop->top + crop->height - 1, &ret); |
| if (ret) |
| goto err_rpm_put; |
| |
| ret = vgxy61_apply_settings(sensor); |
| if (ret) |
| goto err_rpm_put; |
| |
| ret = vgxy61_write_reg(sensor, VGXY61_REG_STREAMING, |
| VGXY61_STREAMING_REQ_START, NULL); |
| if (ret) |
| goto err_rpm_put; |
| |
| ret = vgxy61_poll_reg(sensor, VGXY61_REG_STREAMING, |
| VGXY61_STREAMING_NO_REQ, VGXY61_TIMEOUT_MS); |
| if (ret) |
| goto err_rpm_put; |
| |
| ret = vgxy61_wait_state(sensor, VGXY61_SYSTEM_FSM_STREAMING, |
| VGXY61_TIMEOUT_MS); |
| if (ret) |
| goto err_rpm_put; |
| |
| /* vflip and hflip cannot change during streaming */ |
| __v4l2_ctrl_grab(sensor->vflip_ctrl, true); |
| __v4l2_ctrl_grab(sensor->hflip_ctrl, true); |
| |
| return 0; |
| |
| err_rpm_put: |
| pm_runtime_put(&client->dev); |
| return ret; |
| } |
| |
| static int vgxy61_stream_disable(struct vgxy61_dev *sensor) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(&sensor->sd); |
| int ret; |
| |
| ret = vgxy61_write_reg(sensor, VGXY61_REG_STREAMING, |
| VGXY61_STREAMING_REQ_STOP, NULL); |
| if (ret) |
| goto err_str_dis; |
| |
| ret = vgxy61_poll_reg(sensor, VGXY61_REG_STREAMING, |
| VGXY61_STREAMING_NO_REQ, 2000); |
| if (ret) |
| goto err_str_dis; |
| |
| ret = vgxy61_wait_state(sensor, VGXY61_SYSTEM_FSM_SW_STBY, |
| VGXY61_TIMEOUT_MS); |
| if (ret) |
| goto err_str_dis; |
| |
| __v4l2_ctrl_grab(sensor->vflip_ctrl, false); |
| __v4l2_ctrl_grab(sensor->hflip_ctrl, false); |
| |
| err_str_dis: |
| if (ret) |
| WARN(1, "Can't disable stream"); |
| pm_runtime_put(&client->dev); |
| |
| return ret; |
| } |
| |
| static int vgxy61_s_stream(struct v4l2_subdev *sd, int enable) |
| { |
| struct vgxy61_dev *sensor = to_vgxy61_dev(sd); |
| int ret = 0; |
| |
| mutex_lock(&sensor->lock); |
| |
| ret = enable ? vgxy61_stream_enable(sensor) : |
| vgxy61_stream_disable(sensor); |
| if (!ret) |
| sensor->streaming = enable; |
| |
| mutex_unlock(&sensor->lock); |
| |
| return ret; |
| } |
| |
| static int vgxy61_set_fmt(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state, |
| struct v4l2_subdev_format *format) |
| { |
| struct vgxy61_dev *sensor = to_vgxy61_dev(sd); |
| const struct vgxy61_mode_info *new_mode; |
| struct v4l2_mbus_framefmt *fmt; |
| int ret; |
| |
| mutex_lock(&sensor->lock); |
| |
| if (sensor->streaming) { |
| ret = -EBUSY; |
| goto out; |
| } |
| |
| ret = vgxy61_try_fmt_internal(sd, &format->format, &new_mode); |
| if (ret) |
| goto out; |
| |
| if (format->which == V4L2_SUBDEV_FORMAT_TRY) { |
| fmt = v4l2_subdev_get_try_format(sd, sd_state, 0); |
| *fmt = format->format; |
| } else if (sensor->current_mode != new_mode || |
| sensor->fmt.code != format->format.code) { |
| fmt = &sensor->fmt; |
| *fmt = format->format; |
| |
| sensor->current_mode = new_mode; |
| |
| /* Reset vblank and framelength to default */ |
| ret = vgxy61_update_vblank(sensor, |
| VGXY61_FRAME_LENGTH_DEF - |
| new_mode->crop.height, |
| sensor->hdr); |
| |
| /* Update controls to reflect new mode */ |
| __v4l2_ctrl_s_ctrl_int64(sensor->pixel_rate_ctrl, |
| get_pixel_rate(sensor)); |
| __v4l2_ctrl_modify_range(sensor->vblank_ctrl, |
| sensor->vblank_min, |
| 0xffff - new_mode->crop.height, |
| 1, sensor->vblank); |
| __v4l2_ctrl_s_ctrl(sensor->vblank_ctrl, sensor->vblank); |
| __v4l2_ctrl_modify_range(sensor->expo_ctrl, sensor->expo_min, |
| sensor->expo_max, 1, |
| sensor->expo_long); |
| } |
| |
| out: |
| mutex_unlock(&sensor->lock); |
| |
| return ret; |
| } |
| |
| static int vgxy61_init_cfg(struct v4l2_subdev *sd, |
| struct v4l2_subdev_state *sd_state) |
| { |
| struct vgxy61_dev *sensor = to_vgxy61_dev(sd); |
| struct v4l2_subdev_format fmt = { 0 }; |
| |
| sensor->current_mode = sensor->default_mode; |
| vgxy61_fill_framefmt(sensor, sensor->current_mode, &fmt.format, |
| VGXY61_MEDIA_BUS_FMT_DEF); |
| |
| return vgxy61_set_fmt(sd, sd_state, &fmt); |
| } |
| |
| static int vgxy61_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct v4l2_subdev *sd = ctrl_to_sd(ctrl); |
| struct vgxy61_dev *sensor = to_vgxy61_dev(sd); |
| const struct vgxy61_mode_info *cur_mode = sensor->current_mode; |
| int ret; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_EXPOSURE: |
| ret = vgxy61_update_exposure(sensor, ctrl->val, sensor->hdr); |
| ctrl->val = sensor->expo_long; |
| break; |
| case V4L2_CID_ANALOGUE_GAIN: |
| ret = vgxy61_update_analog_gain(sensor, ctrl->val); |
| break; |
| case V4L2_CID_DIGITAL_GAIN: |
| ret = vgxy61_update_digital_gain(sensor, ctrl->val); |
| break; |
| case V4L2_CID_VFLIP: |
| case V4L2_CID_HFLIP: |
| if (sensor->streaming) { |
| ret = -EBUSY; |
| break; |
| } |
| if (ctrl->id == V4L2_CID_VFLIP) |
| sensor->vflip = ctrl->val; |
| if (ctrl->id == V4L2_CID_HFLIP) |
| sensor->hflip = ctrl->val; |
| ret = 0; |
| break; |
| case V4L2_CID_TEST_PATTERN: |
| ret = vgxy61_update_patgen(sensor, ctrl->val); |
| break; |
| case V4L2_CID_HDR_SENSOR_MODE: |
| ret = vgxy61_update_hdr(sensor, ctrl->val); |
| /* Update vblank and exposure controls to match new hdr */ |
| __v4l2_ctrl_modify_range(sensor->vblank_ctrl, |
| sensor->vblank_min, |
| 0xffff - cur_mode->crop.height, |
| 1, sensor->vblank); |
| __v4l2_ctrl_modify_range(sensor->expo_ctrl, sensor->expo_min, |
| sensor->expo_max, 1, |
| sensor->expo_long); |
| break; |
| case V4L2_CID_VBLANK: |
| ret = vgxy61_update_vblank(sensor, ctrl->val, sensor->hdr); |
| /* Update exposure control to match new vblank */ |
| __v4l2_ctrl_modify_range(sensor->expo_ctrl, sensor->expo_min, |
| sensor->expo_max, 1, |
| sensor->expo_long); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static const struct v4l2_ctrl_ops vgxy61_ctrl_ops = { |
| .s_ctrl = vgxy61_s_ctrl, |
| }; |
| |
| static int vgxy61_init_controls(struct vgxy61_dev *sensor) |
| { |
| const struct v4l2_ctrl_ops *ops = &vgxy61_ctrl_ops; |
| struct v4l2_ctrl_handler *hdl = &sensor->ctrl_handler; |
| const struct vgxy61_mode_info *cur_mode = sensor->current_mode; |
| struct v4l2_ctrl *ctrl; |
| int ret; |
| |
| v4l2_ctrl_handler_init(hdl, 16); |
| /* We can use our own mutex for the ctrl lock */ |
| hdl->lock = &sensor->lock; |
| v4l2_ctrl_new_std(hdl, ops, V4L2_CID_ANALOGUE_GAIN, 0, 0x1c, 1, |
| sensor->analog_gain); |
| v4l2_ctrl_new_std(hdl, ops, V4L2_CID_DIGITAL_GAIN, 0, 0xfff, 1, |
| sensor->digital_gain); |
| v4l2_ctrl_new_std_menu_items(hdl, ops, V4L2_CID_TEST_PATTERN, |
| ARRAY_SIZE(vgxy61_test_pattern_menu) - 1, |
| 0, 0, vgxy61_test_pattern_menu); |
| ctrl = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HBLANK, 0, |
| sensor->line_length, 1, |
| sensor->line_length - cur_mode->width); |
| if (ctrl) |
| ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; |
| ctrl = v4l2_ctrl_new_int_menu(hdl, ops, V4L2_CID_LINK_FREQ, |
| ARRAY_SIZE(link_freq) - 1, 0, link_freq); |
| if (ctrl) |
| ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; |
| v4l2_ctrl_new_std_menu_items(hdl, ops, V4L2_CID_HDR_SENSOR_MODE, |
| ARRAY_SIZE(vgxy61_hdr_mode_menu) - 1, 0, |
| VGXY61_NO_HDR, vgxy61_hdr_mode_menu); |
| |
| /* |
| * Keep a pointer to these controls as we need to update them when |
| * setting the format |
| */ |
| sensor->pixel_rate_ctrl = v4l2_ctrl_new_std(hdl, ops, |
| V4L2_CID_PIXEL_RATE, 1, |
| INT_MAX, 1, |
| get_pixel_rate(sensor)); |
| if (sensor->pixel_rate_ctrl) |
| sensor->pixel_rate_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; |
| sensor->expo_ctrl = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_EXPOSURE, |
| sensor->expo_min, |
| sensor->expo_max, 1, |
| sensor->expo_long); |
| sensor->vblank_ctrl = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VBLANK, |
| sensor->vblank_min, |
| 0xffff - cur_mode->crop.height, |
| 1, sensor->vblank); |
| sensor->vflip_ctrl = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VFLIP, |
| 0, 1, 1, sensor->vflip); |
| sensor->hflip_ctrl = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HFLIP, |
| 0, 1, 1, sensor->hflip); |
| |
| if (hdl->error) { |
| ret = hdl->error; |
| goto free_ctrls; |
| } |
| |
| sensor->sd.ctrl_handler = hdl; |
| return 0; |
| |
| free_ctrls: |
| v4l2_ctrl_handler_free(hdl); |
| return ret; |
| } |
| |
| static const struct v4l2_subdev_video_ops vgxy61_video_ops = { |
| .s_stream = vgxy61_s_stream, |
| }; |
| |
| static const struct v4l2_subdev_pad_ops vgxy61_pad_ops = { |
| .init_cfg = vgxy61_init_cfg, |
| .enum_mbus_code = vgxy61_enum_mbus_code, |
| .get_fmt = vgxy61_get_fmt, |
| .set_fmt = vgxy61_set_fmt, |
| .get_selection = vgxy61_get_selection, |
| .enum_frame_size = vgxy61_enum_frame_size, |
| }; |
| |
| static const struct v4l2_subdev_ops vgxy61_subdev_ops = { |
| .video = &vgxy61_video_ops, |
| .pad = &vgxy61_pad_ops, |
| }; |
| |
| static const struct media_entity_operations vgxy61_subdev_entity_ops = { |
| .link_validate = v4l2_subdev_link_validate, |
| }; |
| |
| static int vgxy61_tx_from_ep(struct vgxy61_dev *sensor, |
| struct fwnode_handle *handle) |
| { |
| struct v4l2_fwnode_endpoint ep = { .bus_type = V4L2_MBUS_CSI2_DPHY }; |
| struct i2c_client *client = sensor->i2c_client; |
| u32 log2phy[VGXY61_NB_POLARITIES] = {~0, ~0, ~0, ~0, ~0}; |
| u32 phy2log[VGXY61_NB_POLARITIES] = {~0, ~0, ~0, ~0, ~0}; |
| int polarities[VGXY61_NB_POLARITIES] = {0, 0, 0, 0, 0}; |
| int l_nb; |
| unsigned int p, l, i; |
| int ret; |
| |
| ret = v4l2_fwnode_endpoint_alloc_parse(handle, &ep); |
| if (ret) |
| return -EINVAL; |
| |
| l_nb = ep.bus.mipi_csi2.num_data_lanes; |
| if (l_nb != 1 && l_nb != 2 && l_nb != 4) { |
| dev_err(&client->dev, "invalid data lane number %d\n", l_nb); |
| goto error_ep; |
| } |
| |
| /* Build log2phy, phy2log and polarities from ep info */ |
| log2phy[0] = ep.bus.mipi_csi2.clock_lane; |
| phy2log[log2phy[0]] = 0; |
| for (l = 1; l < l_nb + 1; l++) { |
| log2phy[l] = ep.bus.mipi_csi2.data_lanes[l - 1]; |
| phy2log[log2phy[l]] = l; |
| } |
| /* |
| * Then fill remaining slots for every physical slot to have something |
| * valid for hardware stuff. |
| */ |
| for (p = 0; p < VGXY61_NB_POLARITIES; p++) { |
| if (phy2log[p] != ~0) |
| continue; |
| phy2log[p] = l; |
| log2phy[l] = p; |
| l++; |
| } |
| for (l = 0; l < l_nb + 1; l++) |
| polarities[l] = ep.bus.mipi_csi2.lane_polarities[l]; |
| |
| if (log2phy[0] != 0) { |
| dev_err(&client->dev, "clk lane must be map to physical lane 0\n"); |
| goto error_ep; |
| } |
| sensor->oif_ctrl = (polarities[4] << 15) + ((phy2log[4] - 1) << 13) + |
| (polarities[3] << 12) + ((phy2log[3] - 1) << 10) + |
| (polarities[2] << 9) + ((phy2log[2] - 1) << 7) + |
| (polarities[1] << 6) + ((phy2log[1] - 1) << 4) + |
| (polarities[0] << 3) + |
| l_nb; |
| sensor->nb_of_lane = l_nb; |
| |
| dev_dbg(&client->dev, "tx uses %d lanes", l_nb); |
| for (i = 0; i < 5; i++) { |
| dev_dbg(&client->dev, "log2phy[%d] = %d\n", i, log2phy[i]); |
| dev_dbg(&client->dev, "phy2log[%d] = %d\n", i, phy2log[i]); |
| dev_dbg(&client->dev, "polarity[%d] = %d\n", i, polarities[i]); |
| } |
| dev_dbg(&client->dev, "oif_ctrl = 0x%04x\n", sensor->oif_ctrl); |
| |
| v4l2_fwnode_endpoint_free(&ep); |
| |
| return 0; |
| |
| error_ep: |
| v4l2_fwnode_endpoint_free(&ep); |
| |
| return -EINVAL; |
| } |
| |
| static int vgxy61_configure(struct vgxy61_dev *sensor) |
| { |
| u32 sensor_freq; |
| u8 prediv, mult; |
| int line_length; |
| int ret = 0; |
| |
| compute_pll_parameters_by_freq(sensor->clk_freq, &prediv, &mult); |
| sensor_freq = (mult * sensor->clk_freq) / prediv; |
| /* Frequency to data rate is 1:1 ratio for MIPI */ |
| sensor->data_rate_in_mbps = sensor_freq; |
| /* Video timing ISP path (pixel clock) requires 804/5 mhz = 160 mhz */ |
| sensor->pclk = sensor_freq / 5; |
| |
| line_length = vgxy61_read_reg(sensor, VGXY61_REG_LINE_LENGTH); |
| if (line_length < 0) |
| return line_length; |
| sensor->line_length = line_length; |
| vgxy61_write_reg(sensor, VGXY61_REG_EXT_CLOCK, sensor->clk_freq, &ret); |
| vgxy61_write_reg(sensor, VGXY61_REG_CLK_PLL_PREDIV, prediv, &ret); |
| vgxy61_write_reg(sensor, VGXY61_REG_CLK_SYS_PLL_MULT, mult, &ret); |
| vgxy61_write_reg(sensor, VGXY61_REG_OIF_CTRL, sensor->oif_ctrl, &ret); |
| vgxy61_write_reg(sensor, VGXY61_REG_FRAME_CONTENT_CTRL, 0, &ret); |
| vgxy61_write_reg(sensor, VGXY61_REG_BYPASS_CTRL, 4, &ret); |
| if (ret) |
| return ret; |
| vgxy61_update_gpios_strobe_polarity(sensor, sensor->gpios_polarity); |
| /* Set pattern generator solid to middle value */ |
| vgxy61_write_reg(sensor, VGXY61_REG_PATGEN_LONG_DATA_GR, 0x800, &ret); |
| vgxy61_write_reg(sensor, VGXY61_REG_PATGEN_LONG_DATA_R, 0x800, &ret); |
| vgxy61_write_reg(sensor, VGXY61_REG_PATGEN_LONG_DATA_B, 0x800, &ret); |
| vgxy61_write_reg(sensor, VGXY61_REG_PATGEN_LONG_DATA_GB, 0x800, &ret); |
| vgxy61_write_reg(sensor, VGXY61_REG_PATGEN_SHORT_DATA_GR, 0x800, &ret); |
| vgxy61_write_reg(sensor, VGXY61_REG_PATGEN_SHORT_DATA_R, 0x800, &ret); |
| vgxy61_write_reg(sensor, VGXY61_REG_PATGEN_SHORT_DATA_B, 0x800, &ret); |
| vgxy61_write_reg(sensor, VGXY61_REG_PATGEN_SHORT_DATA_GB, 0x800, &ret); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int vgxy61_patch(struct vgxy61_dev *sensor) |
| { |
| struct i2c_client *client = sensor->i2c_client; |
| int patch, ret; |
| |
| ret = vgxy61_write_array(sensor, VGXY61_REG_FWPATCH_START_ADDR, |
| sizeof(patch_array), patch_array); |
| if (ret) |
| return ret; |
| |
| ret = vgxy61_write_reg(sensor, VGXY61_REG_STBY, 0x10, NULL); |
| if (ret) |
| return ret; |
| |
| ret = vgxy61_poll_reg(sensor, VGXY61_REG_STBY, 0, VGXY61_TIMEOUT_MS); |
| if (ret) |
| return ret; |
| |
| patch = vgxy61_read_reg(sensor, VGXY61_REG_FWPATCH_REVISION); |
| if (patch < 0) |
| return patch; |
| |
| if (patch != (VGXY61_FWPATCH_REVISION_MAJOR << 12) + |
| (VGXY61_FWPATCH_REVISION_MINOR << 8) + |
| VGXY61_FWPATCH_REVISION_MICRO) { |
| dev_err(&client->dev, "bad patch version expected %d.%d.%d got %d.%d.%d\n", |
| VGXY61_FWPATCH_REVISION_MAJOR, |
| VGXY61_FWPATCH_REVISION_MINOR, |
| VGXY61_FWPATCH_REVISION_MICRO, |
| patch >> 12, (patch >> 8) & 0x0f, patch & 0xff); |
| return -ENODEV; |
| } |
| dev_dbg(&client->dev, "patch %d.%d.%d applied\n", |
| patch >> 12, (patch >> 8) & 0x0f, patch & 0xff); |
| |
| return 0; |
| } |
| |
| static int vgxy61_detect_cut_version(struct vgxy61_dev *sensor) |
| { |
| struct i2c_client *client = sensor->i2c_client; |
| int device_rev; |
| |
| device_rev = vgxy61_read_reg(sensor, VGXY61_REG_REVISION); |
| if (device_rev < 0) |
| return device_rev; |
| |
| switch (device_rev >> 8) { |
| case 0xA: |
| dev_dbg(&client->dev, "Cut1 detected\n"); |
| dev_err(&client->dev, "Cut1 not supported by this driver\n"); |
| return -ENODEV; |
| case 0xB: |
| dev_dbg(&client->dev, "Cut2 detected\n"); |
| return 0; |
| case 0xC: |
| dev_dbg(&client->dev, "Cut3 detected\n"); |
| return 0; |
| default: |
| dev_err(&client->dev, "Unable to detect cut version\n"); |
| return -ENODEV; |
| } |
| } |
| |
| static int vgxy61_detect(struct vgxy61_dev *sensor) |
| { |
| struct i2c_client *client = sensor->i2c_client; |
| int id = 0; |
| int ret, st; |
| |
| id = vgxy61_read_reg(sensor, VGXY61_REG_MODEL_ID); |
| if (id < 0) |
| return id; |
| if (id != VG5661_MODEL_ID && id != VG5761_MODEL_ID) { |
| dev_warn(&client->dev, "Unsupported sensor id %x\n", id); |
| return -ENODEV; |
| } |
| dev_dbg(&client->dev, "detected sensor id = 0x%04x\n", id); |
| sensor->id = id; |
| |
| ret = vgxy61_wait_state(sensor, VGXY61_SYSTEM_FSM_SW_STBY, |
| VGXY61_TIMEOUT_MS); |
| if (ret) |
| return ret; |
| |
| st = vgxy61_read_reg(sensor, VGXY61_REG_NVM); |
| if (st < 0) |
| return st; |
| if (st != VGXY61_NVM_OK) |
| dev_warn(&client->dev, "Bad nvm state got %d\n", st); |
| |
| ret = vgxy61_detect_cut_version(sensor); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| /* Power/clock management functions */ |
| static int vgxy61_power_on(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| struct vgxy61_dev *sensor = to_vgxy61_dev(sd); |
| int ret; |
| |
| ret = regulator_bulk_enable(ARRAY_SIZE(vgxy61_supply_name), |
| sensor->supplies); |
| if (ret) { |
| dev_err(&client->dev, "failed to enable regulators %d\n", ret); |
| return ret; |
| } |
| |
| ret = clk_prepare_enable(sensor->xclk); |
| if (ret) { |
| dev_err(&client->dev, "failed to enable clock %d\n", ret); |
| goto disable_bulk; |
| } |
| |
| if (sensor->reset_gpio) { |
| ret = vgxy61_apply_reset(sensor); |
| if (ret) { |
| dev_err(&client->dev, "sensor reset failed %d\n", ret); |
| goto disable_clock; |
| } |
| } |
| |
| ret = vgxy61_patch(sensor); |
| if (ret) { |
| dev_err(&client->dev, "sensor patch failed %d\n", ret); |
| goto disable_clock; |
| } |
| |
| ret = vgxy61_configure(sensor); |
| if (ret) { |
| dev_err(&client->dev, "sensor configuration failed %d\n", ret); |
| goto disable_clock; |
| } |
| |
| return 0; |
| |
| disable_clock: |
| clk_disable_unprepare(sensor->xclk); |
| disable_bulk: |
| regulator_bulk_disable(ARRAY_SIZE(vgxy61_supply_name), |
| sensor->supplies); |
| |
| return ret; |
| } |
| |
| static int vgxy61_power_off(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| struct vgxy61_dev *sensor = to_vgxy61_dev(sd); |
| |
| clk_disable_unprepare(sensor->xclk); |
| regulator_bulk_disable(ARRAY_SIZE(vgxy61_supply_name), |
| sensor->supplies); |
| return 0; |
| } |
| |
| static void vgxy61_fill_sensor_param(struct vgxy61_dev *sensor) |
| { |
| if (sensor->id == VG5761_MODEL_ID) { |
| sensor->sensor_width = VGX761_WIDTH; |
| sensor->sensor_height = VGX761_HEIGHT; |
| sensor->sensor_modes = vgx761_mode_data; |
| sensor->sensor_modes_nb = ARRAY_SIZE(vgx761_mode_data); |
| sensor->default_mode = &vgx761_mode_data[VGX761_DEFAULT_MODE]; |
| sensor->rot_term = VGX761_SHORT_ROT_TERM; |
| } else if (sensor->id == VG5661_MODEL_ID) { |
| sensor->sensor_width = VGX661_WIDTH; |
| sensor->sensor_height = VGX661_HEIGHT; |
| sensor->sensor_modes = vgx661_mode_data; |
| sensor->sensor_modes_nb = ARRAY_SIZE(vgx661_mode_data); |
| sensor->default_mode = &vgx661_mode_data[VGX661_DEFAULT_MODE]; |
| sensor->rot_term = VGX661_SHORT_ROT_TERM; |
| } else { |
| /* Should never happen */ |
| WARN_ON(true); |
| } |
| sensor->current_mode = sensor->default_mode; |
| } |
| |
| static int vgxy61_probe(struct i2c_client *client) |
| { |
| struct device *dev = &client->dev; |
| struct fwnode_handle *handle; |
| struct vgxy61_dev *sensor; |
| int ret; |
| |
| sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL); |
| if (!sensor) |
| return -ENOMEM; |
| |
| sensor->i2c_client = client; |
| sensor->streaming = false; |
| sensor->hdr = VGXY61_NO_HDR; |
| sensor->expo_long = 200; |
| sensor->expo_short = 0; |
| sensor->hflip = false; |
| sensor->vflip = false; |
| sensor->analog_gain = 0; |
| sensor->digital_gain = 256; |
| |
| handle = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), 0, 0, 0); |
| if (!handle) { |
| dev_err(dev, "handle node not found\n"); |
| return -EINVAL; |
| } |
| |
| ret = vgxy61_tx_from_ep(sensor, handle); |
| fwnode_handle_put(handle); |
| if (ret) { |
| dev_err(dev, "Failed to parse handle %d\n", ret); |
| return ret; |
| } |
| |
| sensor->xclk = devm_clk_get(dev, NULL); |
| if (IS_ERR(sensor->xclk)) { |
| dev_err(dev, "failed to get xclk\n"); |
| return PTR_ERR(sensor->xclk); |
| } |
| sensor->clk_freq = clk_get_rate(sensor->xclk); |
| if (sensor->clk_freq < 6 * HZ_PER_MHZ || |
| sensor->clk_freq > 27 * HZ_PER_MHZ) { |
| dev_err(dev, "Only 6Mhz-27Mhz clock range supported. provide %lu MHz\n", |
| sensor->clk_freq / HZ_PER_MHZ); |
| return -EINVAL; |
| } |
| sensor->gpios_polarity = |
| device_property_read_bool(dev, "st,strobe-gpios-polarity"); |
| |
| v4l2_i2c_subdev_init(&sensor->sd, client, &vgxy61_subdev_ops); |
| sensor->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; |
| sensor->pad.flags = MEDIA_PAD_FL_SOURCE; |
| sensor->sd.entity.ops = &vgxy61_subdev_entity_ops; |
| sensor->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; |
| |
| sensor->reset_gpio = devm_gpiod_get_optional(dev, "reset", |
| GPIOD_OUT_HIGH); |
| |
| ret = vgxy61_get_regulators(sensor); |
| if (ret) { |
| dev_err(&client->dev, "failed to get regulators %d\n", ret); |
| return ret; |
| } |
| |
| ret = vgxy61_power_on(dev); |
| if (ret) |
| return ret; |
| |
| ret = vgxy61_detect(sensor); |
| if (ret) { |
| dev_err(&client->dev, "sensor detect failed %d\n", ret); |
| return ret; |
| } |
| |
| vgxy61_fill_sensor_param(sensor); |
| vgxy61_fill_framefmt(sensor, sensor->current_mode, &sensor->fmt, |
| VGXY61_MEDIA_BUS_FMT_DEF); |
| |
| ret = vgxy61_update_hdr(sensor, sensor->hdr); |
| if (ret) |
| return ret; |
| |
| mutex_init(&sensor->lock); |
| |
| ret = vgxy61_init_controls(sensor); |
| if (ret) { |
| dev_err(&client->dev, "controls initialization failed %d\n", |
| ret); |
| goto error_power_off; |
| } |
| |
| ret = media_entity_pads_init(&sensor->sd.entity, 1, &sensor->pad); |
| if (ret) { |
| dev_err(&client->dev, "pads init failed %d\n", ret); |
| goto error_handler_free; |
| } |
| |
| /* Enable runtime PM and turn off the device */ |
| pm_runtime_set_active(dev); |
| pm_runtime_enable(dev); |
| pm_runtime_idle(dev); |
| |
| ret = v4l2_async_register_subdev(&sensor->sd); |
| if (ret) { |
| dev_err(&client->dev, "async subdev register failed %d\n", ret); |
| goto error_pm_runtime; |
| } |
| |
| pm_runtime_set_autosuspend_delay(&client->dev, 1000); |
| pm_runtime_use_autosuspend(&client->dev); |
| |
| dev_dbg(&client->dev, "vgxy61 probe successfully\n"); |
| |
| return 0; |
| |
| error_pm_runtime: |
| pm_runtime_disable(&client->dev); |
| pm_runtime_set_suspended(&client->dev); |
| media_entity_cleanup(&sensor->sd.entity); |
| error_handler_free: |
| v4l2_ctrl_handler_free(sensor->sd.ctrl_handler); |
| mutex_destroy(&sensor->lock); |
| error_power_off: |
| vgxy61_power_off(dev); |
| |
| return ret; |
| } |
| |
| static void vgxy61_remove(struct i2c_client *client) |
| { |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| struct vgxy61_dev *sensor = to_vgxy61_dev(sd); |
| |
| v4l2_async_unregister_subdev(&sensor->sd); |
| mutex_destroy(&sensor->lock); |
| media_entity_cleanup(&sensor->sd.entity); |
| |
| pm_runtime_disable(&client->dev); |
| if (!pm_runtime_status_suspended(&client->dev)) |
| vgxy61_power_off(&client->dev); |
| pm_runtime_set_suspended(&client->dev); |
| } |
| |
| static const struct of_device_id vgxy61_dt_ids[] = { |
| { .compatible = "st,st-vgxy61" }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, vgxy61_dt_ids); |
| |
| static const struct dev_pm_ops vgxy61_pm_ops = { |
| SET_RUNTIME_PM_OPS(vgxy61_power_off, vgxy61_power_on, NULL) |
| }; |
| |
| static struct i2c_driver vgxy61_i2c_driver = { |
| .driver = { |
| .name = "st-vgxy61", |
| .of_match_table = vgxy61_dt_ids, |
| .pm = &vgxy61_pm_ops, |
| }, |
| .probe_new = vgxy61_probe, |
| .remove = vgxy61_remove, |
| }; |
| |
| module_i2c_driver(vgxy61_i2c_driver); |
| |
| MODULE_AUTHOR("Benjamin Mugnier <benjamin.mugnier@foss.st.com>"); |
| MODULE_AUTHOR("Mickael Guene <mickael.guene@st.com>"); |
| MODULE_AUTHOR("Sylvain Petinot <sylvain.petinot@foss.st.com>"); |
| MODULE_DESCRIPTION("VGXY61 camera subdev driver"); |
| MODULE_LICENSE("GPL"); |